redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: SoC fixes 

The majority of the fixes this time are for OMAP hardware,
 here is a breakdown of the significant changes:
 
 Various device tree bug fixes:
 - TI am57xx boards need a voltage level fix to avoid damaging SD cards
 - vf610-bk4 fails to detect its flash due to an incorrect description
 - meson-g12a USB phy configuration fails
 - meson-g12b reboot should not power off the SD card
 - Some corrections for apparently harmless differences from the
   documentation.
 
 Regression fixes:
 - ams-delta FIQ interrupts broke in 5.3
 - TI am3/am4 mmc controllers broke in 5.2
 
 The logic_pio driver (used on some Huawei ARM servers) needs a few
 bug fixes for reliability.
 
 A couple of compile-time warning fixes
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdaUf1AAoJEJpsee/mABjZ+7YQALOXvCCfmYKkOSflNKEVXuiZ
 tL7uj5PT2E136JoAoyEs8pqXLSpFnC/PxZ7GuN3+ZD0lqVz8PbIn5MhJ9KRrRzSF
 lazjW++VQcFt1KR77l2umVi9/KiYD7UXU1HHmWN8+D/PX6EM+Gv1j65Ve8oTRn76
 kfsq58y2YC6Rqv9dkiK91mteQ2bdA9b4O33V5M+Idq3aBwyNr5KKihDsNKPSvKl9
 ibGmfGnukVcrVtU2reaUxNp2G1OsIKswq2bB0VwUlFMipPxML6rv94dJxDblb2Ns
 nq3LeG+1TF9mbAxya2sWaF6fIBpxdEU5llFYRoIknSS+F9qM/nSVsi5WsyJJnCxk
 mEvJLhhtt4gH2TZmPvZ6sPWFSVBHDnr8V3F4c0//aTRCN+tV7BCYbf8f3rv/CRNq
 MLRsw8gHVPZyUUK9M4afeR3PqEx4/hbU9mpCtduAsiudnA1gtDBfQp8ODMop8aJ1
 tCCdbFPoZIKKU/yhUm0OAbykPLVGb9zWGBNwYWuNs6IZFkyksGoFg1AspzKGvrcD
 Knywz9dSmiDxRi3qDjVEd/9Rr/CtvUHmbaGq8RlTHmbB7WYoW84UPSD419V4j9vd
 eIn4ScejKJCZUDACQsQXh7nnbg+QtnMq+3ODzvjsax2FAEKd8xtaZElSs8OA0U6b
 xdqEuHPNY8VWBFXwAfdp
 =mV+7
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "The majority of the fixes this time are for OMAP hardware, here is a
  breakdown of the significant changes:

  Various device tree bug fixes:
   - TI am57xx boards need a voltage level fix to avoid damaging SD
     cards
   - vf610-bk4 fails to detect its flash due to an incorrect description
   - meson-g12a USB phy configuration fails
   - meson-g12b reboot should not power off the SD card
   - Some corrections for apparently harmless differences from the
     documentation.

  Regression fixes:
   - ams-delta FIQ interrupts broke in 5.3
   - TI am3/am4 mmc controllers broke in 5.2

  The logic_pio driver (used on some Huawei ARM servers) got a few bug
  fixes for reliability.

  And a couple of compile-time warning fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
  soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST
  soc: ti: pm33xx: Make two symbols static
  soc: ti: pm33xx: Fix static checker warnings
  ARM: OMAP: dma: Mark expected switch fall-throughs
  ARM: dts: Fix incomplete dts data for am3 and am4 mmc
  bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
  ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
  ARM: dts: dra74x: Fix iodelay configuration for mmc3
  ARM: dts: am335x: Fix UARTs length
  ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  bus: hisi_lpc: Add .remove method to avoid driver unbind crash
  bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
  lib: logic_pio: Add logic_pio_unregister_range()
  lib: logic_pio: Avoid possible overlap for unregistering regions
  lib: logic_pio: Fix RCU usage
  arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
  arm64: dts: meson-g12a-sei510: enable IR controller
  arm64: dts: meson-g12a: add missing dwc2 phy-names
  ARM: dts: vf610-bk4: Fix qspi node description
  ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
  ...
alistair/sunxi64-5.4-dsi
Linus Torvalds 2019-08-30 10:53:12 -07:00
parent 8fb8e9e462 7a6c9dbb36
commit e8d6766f3c
29 changed files with 250 additions and 135 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
.mailmap
View File

@ -160,6 +160,8 @@ Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.co
Matt Ranostay <mranostay@gmail.com> <matt.ranostay@intel.com>
Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>
Matt Redfearn <matt.redfearn@mips.com> <matt.redfearn@imgtec.com>
Maxime Ripard <mripard@kernel.org> <maxime.ripard@bootlin.com>
Maxime Ripard <mripard@kernel.org> <maxime.ripard@free-electrons.com>
Mayuresh Janorkar <mayur@ti.com>
Michael Buesch <m@bues.ch>
Michel Dänzer <michel@tungstengraphics.com>

10
MAINTAINERS
View File

@ -683,7 +683,7 @@ S: Maintained
F: drivers/crypto/sunxi-ss/
ALLWINNER VPU DRIVER
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
M: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
L: linux-media@vger.kernel.org
S: Maintained
@ -1408,7 +1408,7 @@ S: Maintained
F: drivers/clk/sunxi/
ARM/Allwinner sunXi SoC support
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@ -3577,7 +3577,7 @@ F: Documentation/filesystems/caching/cachefiles.txt
F: fs/cachefiles/
CADENCE MIPI-CSI2 BRIDGES
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/media/cdns,*.txt
@ -5295,7 +5295,7 @@ F: include/linux/vga*
DRM DRIVERS AND MISC GPU PATCHES
M: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
M: Sean Paul <sean@poorly.run>
W: https://01.org/linuxgraphics/gfx-docs/maintainer-tools/drm-misc.html
S: Maintained
@ -5308,7 +5308,7 @@ F: include/uapi/drm/drm*
F: include/linux/vga*
DRM DRIVERS FOR ALLWINNER A10
M: Maxime Ripard <maxime.ripard@bootlin.com>
M: Maxime Ripard <mripard@kernel.org>
L: dri-devel@lists.freedesktop.org
S: Supported
F: drivers/gpu/drm/sun4i/

16
arch/arm/boot/dts/am33xx-l4.dtsi
View File

@ -185,7 +185,7 @@
uart0: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <72>;
status = "disabled";
dmas = <&edma 26 0>, <&edma 27 0>;
@ -934,7 +934,7 @@
uart1: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <73>;
status = "disabled";
dmas = <&edma 28 0>, <&edma 29 0>;
@ -966,7 +966,7 @@
uart2: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <74>;
status = "disabled";
dmas = <&edma 30 0>, <&edma 31 0>;
@ -1614,7 +1614,7 @@
uart3: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <44>;
status = "disabled";
};
@ -1644,7 +1644,7 @@
uart4: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <45>;
status = "disabled";
};
@ -1674,7 +1674,7 @@
uart5: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
reg = <0x0 0x2000>;
reg = <0x0 0x1000>;
interrupts = <46>;
status = "disabled";
};
@ -1758,6 +1758,8 @@
target-module@cc000 { /* 0x481cc000, ap 60 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xcc020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
@ -1780,6 +1782,8 @@
target-module@d0000 { /* 0x481d0000, ap 62 42.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xd0020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,

32
arch/arm/boot/dts/am33xx.dtsi
View File

@ -234,13 +234,33 @@
interrupt-names = "edma3_tcerrint";
};
mmc3: mmc@47810000 {
compatible = "ti,omap4-hsmmc";
target-module@47810000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
ti,needs-special-reset;
interrupts = <29>;
reg = <0x47810000 0x1000>;
status = "disabled";
reg = <0x478102fc 0x4>,
<0x47810110 0x4>,
<0x47810114 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
SYSC_OMAP2_ENAWAKEUP |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,syss-mask = <1>;
clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x47810000 0x1000>;
mmc3: mmc@0 {
compatible = "ti,omap4-hsmmc";
ti,needs-special-reset;
interrupts = <29>;
reg = <0x0 0x1000>;
};
};
usb: usb@47400000 {

32
arch/arm/boot/dts/am4372.dtsi
View File

@ -228,13 +228,33 @@
interrupt-names = "edma3_tcerrint";
};
mmc3: mmc@47810000 {
compatible = "ti,omap4-hsmmc";
reg = <0x47810000 0x1000>;
target-module@47810000 {
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
ti,needs-special-reset;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
reg = <0x478102fc 0x4>,
<0x47810110 0x4>,
<0x47810114 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
SYSC_OMAP2_ENAWAKEUP |
SYSC_OMAP2_SOFTRESET |
SYSC_OMAP2_AUTOIDLE)>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,syss-mask = <1>;
clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x47810000 0x1000>;
mmc3: mmc@0 {
compatible = "ti,omap4-hsmmc";
ti,needs-special-reset;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0 0x1000>;
};
};
sham: sham@53100000 {

4
arch/arm/boot/dts/am437x-l4.dtsi
View File

@ -1574,6 +1574,8 @@
target-module@cc000 { /* 0x481cc000, ap 50 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xcc020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
@ -1593,6 +1595,8 @@
target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xd0020 0x4>;
reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;

7
arch/arm/boot/dts/am571x-idk.dts
View File

@ -175,14 +175,9 @@
};
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {

7
arch/arm/boot/dts/am572x-idk.dts
View File

@ -16,14 +16,9 @@
};
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {

7
arch/arm/boot/dts/am574x-idk.dts
View File

@ -24,14 +24,9 @@
};
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_default>;
pinctrl-3 = <&mmc1_pins_hs>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
};
&mmc2 {

3
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
View File

@ -379,7 +379,7 @@
};
};
&gpio7 {
&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
@ -430,6 +430,7 @@
bus-width = <4>;
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
no-1-8-v;
};
&mmc2 {

7
arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
View File

@ -16,14 +16,9 @@
};
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&ldo1_reg>;
};

7
arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
View File

@ -16,14 +16,9 @@
};
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
pinctrl-2 = <&mmc1_pins_sdr12>;
pinctrl-3 = <&mmc1_pins_sdr25>;
pinctrl-4 = <&mmc1_pins_sdr50>;
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&ldo1_reg>;
};

2
arch/arm/boot/dts/dra7-evm.dts
View File

@ -498,7 +498,7 @@
phy-supply = <&ldousb_reg>;
};
&gpio7 {
&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};

6
arch/arm/boot/dts/dra7-l4.dtsi
View File

@ -1261,7 +1261,7 @@
};
};
target-module@51000 { /* 0x48051000, ap 45 2e.0 */
gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio7";
reg = <0x51000 0x4>,
@ -3025,7 +3025,7 @@
target-module@80000 { /* 0x48480000, ap 31 16.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x80000 0x4>;
reg = <0x80020 0x4>;
reg-names = "rev";
clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
clock-names = "fck";
@ -4577,7 +4577,7 @@
target-module@c000 { /* 0x4ae3c000, ap 30 04.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0xc000 0x4>;
reg = <0xc020 0x4>;
reg-names = "rev";
clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
clock-names = "fck";

50
arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
View File

@ -32,7 +32,7 @@
*
* Datamanual Revisions:
*
* AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
* AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
* AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
*
*/
@ -229,45 +229,45 @@
mmc3_pins_default: mmc3_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
mmc3_pins_hs: mmc3_pins_hs {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
mmc3_pins_sdr12: mmc3_pins_sdr12 {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
mmc3_pins_sdr25: mmc3_pins_sdr25 {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};

4
arch/arm/boot/dts/vf610-bk4.dts
View File

@ -246,13 +246,13 @@
reg = <0>;
};
n25q128a13_2: flash@1 {
n25q128a13_2: flash@2 {
compatible = "n25q128a13", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <66000000>;
spi-rx-bus-width = <2>;
reg = <1>;
reg = <2>;
};
};

3
arch/arm/mach-omap1/ams-delta-fiq-handler.S
View File

@ -126,6 +126,8 @@ restart:
orr r11, r11, r13 @ mask all requested interrupts
str r11, [r12, #OMAP1510_GPIO_INT_MASK]
str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts
ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set?
beq hksw @ no - try next source
@ -133,7 +135,6 @@ restart:
@@@@@@@@@@@@@@@@@@@@@@
@ Keyboard clock FIQ mode interrupt handler
@ r10 now contains KEYBRD_CLK_MASK, use it
str r10, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack the interrupt
bic r11, r11, r10 @ unmask it
str r11, [r12, #OMAP1510_GPIO_INT_MASK]

4
arch/arm/mach-omap1/ams-delta-fiq.c
View File

@ -70,9 +70,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
* interrupts default to since commit 80ac93c27441
* requires interrupt already acked and unmasked.
*/
if (irq_chip->irq_ack)
irq_chip->irq_ack(d);
if (irq_chip->irq_unmask)
if (!WARN_ON_ONCE(!irq_chip->irq_unmask))
irq_chip->irq_unmask(d);
}
for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)

3
arch/arm/mach-omap2/omap4-common.c
View File

@ -127,6 +127,9 @@ static int __init omap4_sram_init(void)
struct device_node *np;
struct gen_pool *sram_pool;
if (!soc_is_omap44xx() && !soc_is_omap54xx())
return 0;
np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
if (!np)
pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",

3
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View File

@ -379,7 +379,8 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x4,
.sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET,
.sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSC_HAS_RESET_STATUS,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type2,
};

6
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
View File

@ -339,6 +339,12 @@
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;

1
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
View File

@ -2386,6 +2386,7 @@
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
phys = <&usb2_phy1>;
phy-names = "usb2-phy";
dr_mode = "peripheral";
g-rx-fifo-size = <192>;
g-np-tx-fifo-size = <128>;

1
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
View File

@ -53,6 +53,7 @@
gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
tf_io: gpio-regulator-tf_io {

47
drivers/bus/hisi_lpc.c
View File

@ -456,6 +456,17 @@ struct hisi_lpc_acpi_cell {
size_t pdata_size;
};
static void hisi_lpc_acpi_remove(struct device *hostdev)
{
struct acpi_device *adev = ACPI_COMPANION(hostdev);
struct acpi_device *child;
device_for_each_child(hostdev, NULL, hisi_lpc_acpi_remove_subdev);
list_for_each_entry(child, &adev->children, node)
acpi_device_clear_enumerated(child);
}
/*
* hisi_lpc_acpi_probe - probe children for ACPI FW
* @hostdev: LPC host device pointer
@ -555,8 +566,7 @@ static int hisi_lpc_acpi_probe(struct device *hostdev)
return 0;
fail:
device_for_each_child(hostdev, NULL,
hisi_lpc_acpi_remove_subdev);
hisi_lpc_acpi_remove(hostdev);
return ret;
}
@ -569,6 +579,10 @@ static int hisi_lpc_acpi_probe(struct device *dev)
{
return -ENODEV;
}
static void hisi_lpc_acpi_remove(struct device *hostdev)
{
}
#endif // CONFIG_ACPI
/*
@ -606,24 +620,27 @@ static int hisi_lpc_probe(struct platform_device *pdev)
range->fwnode = dev->fwnode;
range->flags = LOGIC_PIO_INDIRECT;
range->size = PIO_INDIRECT_SIZE;
range->hostdata = lpcdev;
range->ops = &hisi_lpc_ops;
lpcdev->io_host = range;
ret = logic_pio_register_range(range);
if (ret) {
dev_err(dev, "register IO range failed (%d)!\n", ret);
return ret;
}
lpcdev->io_host = range;
/* register the LPC host PIO resources */
if (acpi_device)
ret = hisi_lpc_acpi_probe(dev);
else
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret)
if (ret) {
logic_pio_unregister_range(range);
return ret;
}
lpcdev->io_host->hostdata = lpcdev;
lpcdev->io_host->ops = &hisi_lpc_ops;
dev_set_drvdata(dev, lpcdev);
io_end = lpcdev->io_host->io_start + lpcdev->io_host->size;
dev_info(dev, "registered range [%pa - %pa]\n",
@ -632,6 +649,23 @@ static int hisi_lpc_probe(struct platform_device *pdev)
return ret;
}
static int hisi_lpc_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct acpi_device *acpi_device = ACPI_COMPANION(dev);
struct hisi_lpc_dev *lpcdev = dev_get_drvdata(dev);
struct logic_pio_hwaddr *range = lpcdev->io_host;
if (acpi_device)
hisi_lpc_acpi_remove(dev);
else
of_platform_depopulate(dev);
logic_pio_unregister_range(range);
return 0;
}
static const struct of_device_id hisi_lpc_of_match[] = {
{ .compatible = "hisilicon,hip06-lpc", },
{ .compatible = "hisilicon,hip07-lpc", },
@ -645,5 +679,6 @@ static struct platform_driver hisi_lpc_driver = {
.acpi_match_table = ACPI_PTR(hisi_lpc_acpi_match),
},
.probe = hisi_lpc_probe,
.remove = hisi_lpc_remove,
};
builtin_platform_driver(hisi_lpc_driver);

24
drivers/bus/ti-sysc.c
View File

@ -949,7 +949,7 @@ static int sysc_best_idle_mode(u32 idlemodes, u32 *best_mode)
*best_mode = SYSC_IDLE_SMART_WKUP;
else if (idlemodes & BIT(SYSC_IDLE_SMART))
*best_mode = SYSC_IDLE_SMART;
else if (idlemodes & SYSC_IDLE_FORCE)
else if (idlemodes & BIT(SYSC_IDLE_FORCE))
*best_mode = SYSC_IDLE_FORCE;
else
return -EINVAL;
@ -1267,7 +1267,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("control", 0, 0, 0x10, -1, 0x40000900, 0xffffffff, 0),
SYSC_QUIRK("cpgmac", 0, 0x1200, 0x1208, 0x1204, 0x4edb1902,
0xffff00f0, 0),
SYSC_QUIRK("dcan", 0, 0, -1, -1, 0xffffffff, 0xffffffff, 0),
SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0xa3170504, 0xffffffff, 0),
SYSC_QUIRK("dcan", 0, 0x20, -1, -1, 0x4edb1902, 0xffffffff, 0),
SYSC_QUIRK("dmic", 0, 0, 0x10, -1, 0x50010000, 0xffffffff, 0),
SYSC_QUIRK("dwc3", 0, 0, 0x10, -1, 0x500a0200, 0xffffffff, 0),
SYSC_QUIRK("epwmss", 0, 0, 0x4, -1, 0x47400001, 0xffffffff, 0),
@ -1692,10 +1693,7 @@ static int sysc_init_sysc_mask(struct sysc *ddata)
if (error)
return 0;
if (val)
ddata->cfg.sysc_val = val & ddata->cap->sysc_mask;
else
ddata->cfg.sysc_val = ddata->cap->sysc_mask;
ddata->cfg.sysc_val = val & ddata->cap->sysc_mask;
return 0;
}
@ -2385,27 +2383,27 @@ static int sysc_probe(struct platform_device *pdev)
error = sysc_init_dts_quirks(ddata);
if (error)
goto unprepare;
return error;
error = sysc_map_and_check_registers(ddata);
if (error)
goto unprepare;
return error;
error = sysc_init_sysc_mask(ddata);
if (error)
goto unprepare;
return error;
error = sysc_init_idlemodes(ddata);
if (error)
goto unprepare;
return error;
error = sysc_init_syss_mask(ddata);
if (error)
goto unprepare;
return error;
error = sysc_init_pdata(ddata);
if (error)
goto unprepare;
return error;
sysc_init_early_quirks(ddata);
@ -2415,7 +2413,7 @@ static int sysc_probe(struct platform_device *pdev)
error = sysc_init_resets(ddata);
if (error)
return error;
goto unprepare;
error = sysc_init_module(ddata);
if (error)

4
drivers/soc/ixp4xx/Kconfig
View File

@ -1,4 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
if ARCH_IXP4XX || COMPILE_TEST
menu "IXP4xx SoC drivers"
config IXP4XX_QMGR
@ -15,3 +17,5 @@ config IXP4XX_NPE
and is automatically selected by Ethernet and HSS drivers.
endmenu
endif

19
drivers/soc/ti/pm33xx.c
View File

@ -141,7 +141,7 @@ static int __init am43xx_map_gic(void)
}
#ifdef CONFIG_SUSPEND
struct wkup_m3_wakeup_src rtc_wake_src(void)
static struct wkup_m3_wakeup_src rtc_wake_src(void)
{
u32 i;
@ -157,7 +157,7 @@ struct wkup_m3_wakeup_src rtc_wake_src(void)
return rtc_ext_wakeup;
}
int am33xx_rtc_only_idle(unsigned long wfi_flags)
static int am33xx_rtc_only_idle(unsigned long wfi_flags)
{
omap_rtc_power_off_program(&omap_rtc->dev);
am33xx_do_wfi_sram(wfi_flags);
@ -252,7 +252,7 @@ static int am33xx_pm_begin(suspend_state_t state)
if (state == PM_SUSPEND_MEM && pm_ops->check_off_mode_enable()) {
nvmem = devm_nvmem_device_get(&omap_rtc->dev,
"omap_rtc_scratch0");
if (nvmem)
if (!IS_ERR(nvmem))
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
(void *)&rtc_magic_val);
rtc_only_idle = 1;
@ -278,9 +278,12 @@ static void am33xx_pm_end(void)
struct nvmem_device *nvmem;
nvmem = devm_nvmem_device_get(&omap_rtc->dev, "omap_rtc_scratch0");
if (IS_ERR(nvmem))
return;
m3_ipc->ops->finish_low_power(m3_ipc);
if (rtc_only_idle) {
if (retrigger_irq)
if (retrigger_irq) {
/*
* 32 bits of Interrupt Set-Pending correspond to 32
* 32 interrupts. Compute the bit offset of the
@ -291,8 +294,10 @@ static void am33xx_pm_end(void)
writel_relaxed(1 << (retrigger_irq & 31),
gic_dist_base + GIC_INT_SET_PENDING_BASE
+ retrigger_irq / 32 * 4);
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
(void *)&val);
}
nvmem_device_write(nvmem, RTC_SCRATCH_MAGIC_REG * 4, 4,
(void *)&val);
}
rtc_only_idle = 0;
@ -415,7 +420,7 @@ static int am33xx_pm_rtc_setup(void)
nvmem = devm_nvmem_device_get(&omap_rtc->dev,
"omap_rtc_scratch0");
if (nvmem) {
if (!IS_ERR(nvmem)) {
nvmem_device_read(nvmem, RTC_SCRATCH_MAGIC_REG * 4,
4, (void *)&rtc_magic_val);
if ((rtc_magic_val & 0xffff) != RTC_REG_BOOT_MAGIC)

1
include/linux/logic_pio.h
View File

@ -117,6 +117,7 @@ struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode);
unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
resource_size_t hw_addr, resource_size_t size);
int logic_pio_register_range(struct logic_pio_hwaddr *newrange);
void logic_pio_unregister_range(struct logic_pio_hwaddr *range);
resource_size_t logic_pio_to_hwaddr(unsigned long pio);
unsigned long logic_pio_trans_cpuaddr(resource_size_t hw_addr);

73
lib/logic_pio.c
View File

@ -35,7 +35,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
struct logic_pio_hwaddr *range;
resource_size_t start;
resource_size_t end;
resource_size_t mmio_sz = 0;
resource_size_t mmio_end = 0;
resource_size_t iio_sz = MMIO_UPPER_LIMIT;
int ret = 0;
@ -46,7 +46,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
end = new_range->hw_start + new_range->size;
mutex_lock(&io_range_mutex);
list_for_each_entry_rcu(range, &io_range_list, list) {
list_for_each_entry(range, &io_range_list, list) {
if (range->fwnode == new_range->fwnode) {
/* range already there */
goto end_register;
@ -56,7 +56,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
/* for MMIO ranges we need to check for overlap */
if (start >= range->hw_start + range->size ||
end < range->hw_start) {
mmio_sz += range->size;
mmio_end = range->io_start + range->size;
} else {
ret = -EFAULT;
goto end_register;
@ -69,16 +69,16 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
/* range not registered yet, check for available space */
if (new_range->flags == LOGIC_PIO_CPU_MMIO) {
if (mmio_sz + new_range->size - 1 > MMIO_UPPER_LIMIT) {
if (mmio_end + new_range->size - 1 > MMIO_UPPER_LIMIT) {
/* if it's too big check if 64K space can be reserved */
if (mmio_sz + SZ_64K - 1 > MMIO_UPPER_LIMIT) {
if (mmio_end + SZ_64K - 1 > MMIO_UPPER_LIMIT) {
ret = -E2BIG;
goto end_register;
}
new_range->size = SZ_64K;
pr_warn("Requested IO range too big, new size set to 64K\n");
}
new_range->io_start = mmio_sz;
new_range->io_start = mmio_end;
} else if (new_range->flags == LOGIC_PIO_INDIRECT) {
if (iio_sz + new_range->size - 1 > IO_SPACE_LIMIT) {
ret = -E2BIG;
@ -98,6 +98,20 @@ end_register:
return ret;
}
/**
* logic_pio_unregister_range - unregister a logical PIO range for a host
* @range: pointer to the IO range which has been already registered.
*
* Unregister a previously-registered IO range node.
*/
void logic_pio_unregister_range(struct logic_pio_hwaddr *range)
{
mutex_lock(&io_range_mutex);
list_del_rcu(&range->list);
mutex_unlock(&io_range_mutex);
synchronize_rcu();
}
/**
* find_io_range_by_fwnode - find logical PIO range for given FW node
* @fwnode: FW node handle associated with logical PIO range
@ -108,26 +122,38 @@ end_register:
*/
struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode)
{
struct logic_pio_hwaddr *range;
struct logic_pio_hwaddr *range, *found_range = NULL;
rcu_read_lock();
list_for_each_entry_rcu(range, &io_range_list, list) {
if (range->fwnode == fwnode)
return range;
if (range->fwnode == fwnode) {
found_range = range;
break;
}
}
return NULL;
rcu_read_unlock();
return found_range;
}
/* Return a registered range given an input PIO token */
static struct logic_pio_hwaddr *find_io_range(unsigned long pio)
{
struct logic_pio_hwaddr *range;
struct logic_pio_hwaddr *range, *found_range = NULL;
rcu_read_lock();
list_for_each_entry_rcu(range, &io_range_list, list) {
if (in_range(pio, range->io_start, range->size))
return range;
if (in_range(pio, range->io_start, range->size)) {
found_range = range;
break;
}
}
pr_err("PIO entry token %lx invalid\n", pio);
return NULL;
rcu_read_unlock();
if (!found_range)
pr_err("PIO entry token 0x%lx invalid\n", pio);
return found_range;
}
/**
@ -180,14 +206,23 @@ unsigned long logic_pio_trans_cpuaddr(resource_size_t addr)
{
struct logic_pio_hwaddr *range;
rcu_read_lock();
list_for_each_entry_rcu(range, &io_range_list, list) {
if (range->flags != LOGIC_PIO_CPU_MMIO)
continue;
if (in_range(addr, range->hw_start, range->size))
return addr - range->hw_start + range->io_start;
if (in_range(addr, range->hw_start, range->size)) {
unsigned long cpuaddr;
cpuaddr = addr - range->hw_start + range->io_start;
rcu_read_unlock();
return cpuaddr;
}
}
pr_err("addr %llx not registered in io_range_list\n",
(unsigned long long) addr);
rcu_read_unlock();
pr_err("addr %pa not registered in io_range_list\n", &addr);
return ~0UL;
}