From e8f69e545e51b9f2870d64082db533557b8d0d09 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Sat, 24 Dec 2011 00:28:18 +1000 Subject: [PATCH] m68knommu: make 5249 UART platform addressing consistent If we make all UART addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 5249 UART addressing so that: . UARTs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer --- arch/m68k/include/asm/m5249sim.h | 7 +++++-- arch/m68k/platform/5249/config.c | 12 ++++++------ 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 805714ca8d7d..3e31508619c1 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -76,8 +76,8 @@ /* * UART module. */ -#define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ -#define MCFUART_BASE2 0x200 /* Base address of UART2 */ +#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */ +#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */ /* * DMA unit base addresses. @@ -108,6 +108,9 @@ #define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ #define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ +#define MCF_IRQ_UART0 73 /* UART0 */ +#define MCF_IRQ_UART1 74 /* UART1 */ + /* * General purpose IO registers (in MBAR2). */ diff --git a/arch/m68k/platform/5249/config.c b/arch/m68k/platform/5249/config.c index 50e2d8f23251..b74092a20d2d 100644 --- a/arch/m68k/platform/5249/config.c +++ b/arch/m68k/platform/5249/config.c @@ -24,12 +24,12 @@ static struct mcf_platform_uart m5249_uart_platform[] = { { - .mapbase = MCF_MBAR + MCFUART_BASE1, - .irq = 73, + .mapbase = MCFUART_BASE0, + .irq = MCF_IRQ_UART0, }, { - .mapbase = MCF_MBAR + MCFUART_BASE2, - .irq = 74, + .mapbase = MCFUART_BASE1, + .irq = MCF_IRQ_UART1, }, { }, }; @@ -238,11 +238,11 @@ static void __init m5249_uart_init_line(int line, int irq) { if (line == 0) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); - writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); + writeb(irq, MCFUART_BASE0 + MCFUART_UIVR); mcf_mapirq2imr(irq, MCFINTC_UART0); } else if (line == 1) { writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); - writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); + writeb(irq, MCFUART_BASE1 + MCFUART_UIVR); mcf_mapirq2imr(irq, MCFINTC_UART1); } }