[ALSA] hda-codec - More fix of ALC880 codec support
Documentation,HDA Codec driver,HDA generic driver,HDA Intel driver - Fix some invalid configurations, typos in the last patch - Make init_verbs chainable, so that different configs can share the same init_verbs - Reorder and clean up the source codes in patch_realtek.c - Add the pin default configuration parser, used commonly in cmedia and realtek patch codes. - Add 'auto' model to ALC880 for auto-configuration from BIOS Use this model as default, and 3-stack as fallback Signed-off-by: Takashi Iwai <tiwai@suse.de>hifive-unleashed-5.1
Takashi Iwai
Jaroslav Kysela
parent
b636a71d9b
commit
e9edcee061
|
|
@ -638,6 +638,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
|||
5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
|
||||
w810 3-jack
|
||||
z71v 3-jack (HP shared SPDIF)
|
||||
asus 3-jack
|
||||
uniwill 3-jack
|
||||
F1734 2-jack
|
||||
|
||||
CMI9880
|
||||
minimal 3-jack in back
|
||||
|
|
@ -645,6 +648,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
|
|||
full 6-jack in back, 2-jack in front
|
||||
full_dig 6-jack in back, 2-jack in front, SPDIF I/O
|
||||
allout 5-jack in back, 2-jack in front, SPDIF out
|
||||
auto auto-config reading BIOS (default)
|
||||
|
||||
Note 2: If you get click noises on output, try the module option
|
||||
position_fix=1 or 2. position_fix=1 will use the SD_LPIB
|
||||
|
|
|
|||
|
|
@ -1520,9 +1520,9 @@ int snd_hda_build_pcms(struct hda_bus *bus)
|
|||
*
|
||||
* If no entries are matching, the function returns a negative value.
|
||||
*/
|
||||
int snd_hda_check_board_config(struct hda_codec *codec, struct hda_board_config *tbl)
|
||||
int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_config *tbl)
|
||||
{
|
||||
struct hda_board_config *c;
|
||||
const struct hda_board_config *c;
|
||||
|
||||
if (codec->bus->modelname) {
|
||||
for (c = tbl; c->modelname || c->pci_subvendor; c++) {
|
||||
|
|
@ -1714,6 +1714,105 @@ int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec, struct hda_multi_o
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Helper for automatic ping configuration
|
||||
*/
|
||||
/* parse all pin widgets and store the useful pin nids to cfg */
|
||||
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg)
|
||||
{
|
||||
hda_nid_t nid, nid_start;
|
||||
int i, j, nodes;
|
||||
short seq, sequences[4], assoc_line_out;
|
||||
|
||||
memset(cfg, 0, sizeof(*cfg));
|
||||
|
||||
memset(sequences, 0, sizeof(sequences));
|
||||
assoc_line_out = 0;
|
||||
|
||||
nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start);
|
||||
for (nid = nid_start; nid < nodes + nid_start; nid++) {
|
||||
unsigned int wid_caps = snd_hda_param_read(codec, nid,
|
||||
AC_PAR_AUDIO_WIDGET_CAP);
|
||||
unsigned int wid_type = (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
|
||||
unsigned int def_conf;
|
||||
short assoc, loc;
|
||||
|
||||
/* read all default configuration for pin complex */
|
||||
if (wid_type != AC_WID_PIN)
|
||||
continue;
|
||||
def_conf = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
|
||||
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
|
||||
continue;
|
||||
loc = get_defcfg_location(def_conf);
|
||||
switch (get_defcfg_device(def_conf)) {
|
||||
case AC_JACK_LINE_OUT:
|
||||
case AC_JACK_SPEAKER:
|
||||
seq = get_defcfg_sequence(def_conf);
|
||||
assoc = get_defcfg_association(def_conf);
|
||||
if (! assoc)
|
||||
continue;
|
||||
if (! assoc_line_out)
|
||||
assoc_line_out = assoc;
|
||||
else if (assoc_line_out != assoc)
|
||||
continue;
|
||||
if (cfg->line_outs >= ARRAY_SIZE(cfg->line_out_pins))
|
||||
continue;
|
||||
cfg->line_out_pins[cfg->line_outs] = nid;
|
||||
sequences[cfg->line_outs] = seq;
|
||||
cfg->line_outs++;
|
||||
break;
|
||||
case AC_JACK_HP_OUT:
|
||||
cfg->hp_pin = nid;
|
||||
break;
|
||||
case AC_JACK_MIC_IN:
|
||||
if (loc == AC_JACK_LOC_FRONT)
|
||||
cfg->input_pins[AUTO_PIN_FRONT_MIC] = nid;
|
||||
else
|
||||
cfg->input_pins[AUTO_PIN_MIC] = nid;
|
||||
break;
|
||||
case AC_JACK_LINE_IN:
|
||||
if (loc == AC_JACK_LOC_FRONT)
|
||||
cfg->input_pins[AUTO_PIN_FRONT_LINE] = nid;
|
||||
else
|
||||
cfg->input_pins[AUTO_PIN_LINE] = nid;
|
||||
break;
|
||||
case AC_JACK_CD:
|
||||
cfg->input_pins[AUTO_PIN_CD] = nid;
|
||||
break;
|
||||
case AC_JACK_AUX:
|
||||
cfg->input_pins[AUTO_PIN_AUX] = nid;
|
||||
break;
|
||||
case AC_JACK_SPDIF_OUT:
|
||||
cfg->dig_out_pin = nid;
|
||||
break;
|
||||
case AC_JACK_SPDIF_IN:
|
||||
cfg->dig_in_pin = nid;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* sort by sequence */
|
||||
for (i = 0; i < cfg->line_outs; i++)
|
||||
for (j = i + 1; j < cfg->line_outs; j++)
|
||||
if (sequences[i] > sequences[j]) {
|
||||
seq = sequences[i];
|
||||
sequences[i] = sequences[j];
|
||||
sequences[j] = seq;
|
||||
nid = cfg->line_out_pins[i];
|
||||
cfg->line_out_pins[i] = cfg->line_out_pins[j];
|
||||
cfg->line_out_pins[j] = nid;
|
||||
}
|
||||
|
||||
/* Swap surround and CLFE: the association order is front/CLFE/surr/back */
|
||||
if (cfg->line_outs >= 3) {
|
||||
nid = cfg->line_out_pins[1];
|
||||
cfg->line_out_pins[1] = cfg->line_out_pins[2];
|
||||
cfg->line_out_pins[2] = nid;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
/*
|
||||
* power management
|
||||
|
|
|
|||
|
|
@ -68,8 +68,8 @@ struct hda_gspec {
|
|||
/*
|
||||
* retrieve the default device type from the default config value
|
||||
*/
|
||||
#define get_defcfg_type(node) (((node)->def_cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
|
||||
#define get_defcfg_location(node) (((node)->def_cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
|
||||
#define defcfg_type(node) (((node)->def_cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
|
||||
#define defcfg_location(node) (((node)->def_cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
|
||||
|
||||
/*
|
||||
* destructor
|
||||
|
|
@ -323,7 +323,7 @@ static struct hda_gnode *parse_output_jack(struct hda_codec *codec,
|
|||
if (! (node->pin_caps & AC_PINCAP_OUT))
|
||||
continue;
|
||||
if (jack_type >= 0) {
|
||||
if (jack_type != get_defcfg_type(node))
|
||||
if (jack_type != defcfg_type(node))
|
||||
continue;
|
||||
if (node->wid_caps & AC_WCAP_DIGITAL)
|
||||
continue; /* skip SPDIF */
|
||||
|
|
@ -418,8 +418,8 @@ static int capture_source_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *uc
|
|||
*/
|
||||
static const char *get_input_type(struct hda_gnode *node, unsigned int *pinctl)
|
||||
{
|
||||
unsigned int location = get_defcfg_location(node);
|
||||
switch (get_defcfg_type(node)) {
|
||||
unsigned int location = defcfg_location(node);
|
||||
switch (defcfg_type(node)) {
|
||||
case AC_JACK_LINE_IN:
|
||||
if ((location & 0x0f) == AC_JACK_LOC_FRONT)
|
||||
return "Front Line";
|
||||
|
|
|
|||
|
|
@ -1458,7 +1458,7 @@ static struct pci_device_id azx_ids[] = {
|
|||
{ 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ESB2 */
|
||||
{ 0x1002, 0x437b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ATI SB450 */
|
||||
{ 0x1106, 0x3288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* VIA VT8251/VT8237A */
|
||||
{ 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ULI */
|
||||
{ 0x10b9, 0x5461, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* ALI 5461? */
|
||||
{ 0, }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(pci, azx_ids);
|
||||
|
|
|
|||
|
|
@ -130,7 +130,7 @@ struct hda_board_config {
|
|||
unsigned short pci_subdevice;
|
||||
};
|
||||
|
||||
int snd_hda_check_board_config(struct hda_codec *codec, struct hda_board_config *tbl);
|
||||
int snd_hda_check_board_config(struct hda_codec *codec, const struct hda_board_config *tbl);
|
||||
int snd_hda_add_new_ctls(struct hda_codec *codec, snd_kcontrol_new_t *knew);
|
||||
|
||||
/*
|
||||
|
|
@ -158,4 +158,35 @@ struct hda_bus_unsolicited {
|
|||
struct work_struct work;
|
||||
};
|
||||
|
||||
/*
|
||||
* Helper for automatic ping configuration
|
||||
*/
|
||||
|
||||
enum {
|
||||
AUTO_PIN_MIC,
|
||||
AUTO_PIN_FRONT_MIC,
|
||||
AUTO_PIN_LINE,
|
||||
AUTO_PIN_FRONT_LINE,
|
||||
AUTO_PIN_CD,
|
||||
AUTO_PIN_AUX,
|
||||
AUTO_PIN_LAST
|
||||
};
|
||||
|
||||
struct auto_pin_cfg {
|
||||
int line_outs;
|
||||
hda_nid_t line_out_pins[4]; /* sorted in the order of Front/Surr/CLFE/Side */
|
||||
hda_nid_t hp_pin;
|
||||
hda_nid_t input_pins[AUTO_PIN_LAST];
|
||||
hda_nid_t dig_out_pin;
|
||||
hda_nid_t dig_in_pin;
|
||||
};
|
||||
|
||||
#define get_defcfg_connect(cfg) ((cfg & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT)
|
||||
#define get_defcfg_association(cfg) ((cfg & AC_DEFCFG_DEF_ASSOC) >> AC_DEFCFG_ASSOC_SHIFT)
|
||||
#define get_defcfg_location(cfg) ((cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT)
|
||||
#define get_defcfg_sequence(cfg) (cfg & AC_DEFCFG_SEQUENCE)
|
||||
#define get_defcfg_device(cfg) ((cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
|
||||
|
||||
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg);
|
||||
|
||||
#endif /* __SOUND_HDA_LOCAL_H */
|
||||
|
|
|
|||
|
|
@ -51,6 +51,7 @@ struct cmi_spec {
|
|||
/* playback */
|
||||
struct hda_multi_out multiout;
|
||||
hda_nid_t dac_nids[4]; /* NID for each DAC */
|
||||
int num_dacs;
|
||||
|
||||
/* capture */
|
||||
hda_nid_t *adc_nids;
|
||||
|
|
@ -77,6 +78,19 @@ struct cmi_spec {
|
|||
struct hda_verb multi_init[9]; /* 2 verbs for each pin + terminator */
|
||||
};
|
||||
|
||||
/* amp values */
|
||||
#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
|
||||
#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
|
||||
#define AMP_OUT_MUTE 0xb080
|
||||
#define AMP_OUT_UNMUTE 0xb000
|
||||
#define AMP_OUT_ZERO 0xb000
|
||||
/* pinctl values */
|
||||
#define PIN_IN 0x20
|
||||
#define PIN_VREF80 0x24
|
||||
#define PIN_VREF50 0x21
|
||||
#define PIN_OUT 0x40
|
||||
#define PIN_HP 0xc0
|
||||
|
||||
/*
|
||||
* input MUX
|
||||
*/
|
||||
|
|
@ -114,9 +128,9 @@ static int cmi_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucon
|
|||
/* 3-stack / 2 channel */
|
||||
static struct hda_verb cmi9880_ch2_init[] = {
|
||||
/* set line-in PIN for input */
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
|
||||
/* set mic PIN for input, also enable vref */
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
|
||||
/* route front PCM (DAC1) to HP */
|
||||
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
|
||||
{}
|
||||
|
|
@ -125,9 +139,9 @@ static struct hda_verb cmi9880_ch2_init[] = {
|
|||
/* 3-stack / 6 channel */
|
||||
static struct hda_verb cmi9880_ch6_init[] = {
|
||||
/* set line-in PIN for output */
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
|
||||
/* set mic PIN for output */
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
|
||||
/* route front PCM (DAC1) to HP */
|
||||
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
|
||||
{}
|
||||
|
|
@ -136,9 +150,9 @@ static struct hda_verb cmi9880_ch6_init[] = {
|
|||
/* 3-stack+front / 8 channel */
|
||||
static struct hda_verb cmi9880_ch8_init[] = {
|
||||
/* set line-in PIN for output */
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
|
||||
/* set mic PIN for output */
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
|
||||
/* route rear-surround PCM (DAC4) to HP */
|
||||
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x03 },
|
||||
{}
|
||||
|
|
@ -281,27 +295,27 @@ static hda_nid_t cmi9880_adc_nids[2] = {
|
|||
*/
|
||||
static struct hda_verb cmi9880_basic_init[] = {
|
||||
/* port-D for line out (rear panel) */
|
||||
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
/* port-E for HP out (front panel) */
|
||||
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
/* route front PCM to HP */
|
||||
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
|
||||
/* port-A for surround (rear panel) */
|
||||
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
/* port-G for CLFE (rear panel) */
|
||||
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
{ 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 },
|
||||
/* port-H for side (rear panel) */
|
||||
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 },
|
||||
/* port-C for line-in (rear panel) */
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
|
||||
/* port-B for mic-in (rear panel) with vref */
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
|
||||
/* port-F for mic-in (front panel) with vref */
|
||||
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
|
||||
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
|
||||
/* CD-in */
|
||||
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
|
||||
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
|
||||
/* route front mic to ADC1/2 */
|
||||
{ 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 },
|
||||
{ 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 },
|
||||
|
|
@ -310,27 +324,27 @@ static struct hda_verb cmi9880_basic_init[] = {
|
|||
|
||||
static struct hda_verb cmi9880_allout_init[] = {
|
||||
/* port-D for line out (rear panel) */
|
||||
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
/* port-E for HP out (front panel) */
|
||||
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
/* route front PCM to HP */
|
||||
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
|
||||
/* port-A for side (rear panel) */
|
||||
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
/* port-G for CLFE (rear panel) */
|
||||
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
{ 0x1f, AC_VERB_SET_CONNECT_SEL, 0x02 },
|
||||
/* port-H for side (rear panel) */
|
||||
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x01 },
|
||||
/* port-C for surround (rear panel) */
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
|
||||
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
|
||||
/* port-B for mic-in (rear panel) with vref */
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
|
||||
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
|
||||
/* port-F for mic-in (front panel) with vref */
|
||||
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
|
||||
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
|
||||
/* CD-in */
|
||||
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
|
||||
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
|
||||
/* route front mic to ADC1/2 */
|
||||
{ 0x08, AC_VERB_SET_CONNECT_SEL, 0x05 },
|
||||
{ 0x09, AC_VERB_SET_CONNECT_SEL, 0x05 },
|
||||
|
|
@ -365,101 +379,9 @@ static int cmi9880_build_controls(struct hda_codec *codec)
|
|||
return 0;
|
||||
}
|
||||
|
||||
#define get_defcfg_connect(cfg) ((cfg & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT)
|
||||
#define get_defcfg_association(cfg) ((cfg & AC_DEFCFG_DEF_ASSOC) >> AC_DEFCFG_ASSOC_SHIFT)
|
||||
#define get_defcfg_sequence(cfg) (cfg & AC_DEFCFG_SEQUENCE)
|
||||
|
||||
/* get all pin default configuration in def_conf */
|
||||
static int cmi9880_get_pin_def_config(struct hda_codec *codec)
|
||||
{
|
||||
struct cmi_spec *spec = codec->spec;
|
||||
hda_nid_t nid, nid_start;
|
||||
int i = 0, nodes;
|
||||
|
||||
nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid_start);
|
||||
for (nid = nid_start; nid < nodes + nid_start; nid++) {
|
||||
unsigned int wid_caps = snd_hda_param_read(codec, nid,
|
||||
AC_PAR_AUDIO_WIDGET_CAP);
|
||||
unsigned int wid_type = (wid_caps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
|
||||
/* read all default configuration for pin complex */
|
||||
if (wid_type == AC_WID_PIN) {
|
||||
spec->pin_nid[i] = nid;
|
||||
spec->def_conf[i] =
|
||||
snd_hda_codec_read(codec, nid, 0,
|
||||
AC_VERB_GET_CONFIG_DEFAULT, 0);
|
||||
i++;
|
||||
}
|
||||
}
|
||||
spec->pin_def_confs = i;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* get a pin default configuration of nid in def_conf */
|
||||
static unsigned int cmi9880_get_def_config(struct hda_codec *codec, hda_nid_t nid)
|
||||
{
|
||||
struct cmi_spec *spec = codec->spec;
|
||||
int i = 0;
|
||||
|
||||
while (spec->pin_nid[i] != nid && i < spec->pin_def_confs)
|
||||
i++;
|
||||
if (i == spec->pin_def_confs)
|
||||
return (unsigned int) -1;
|
||||
else
|
||||
return spec->def_conf[i];
|
||||
}
|
||||
|
||||
/* decide what pins to use for multichannel playback */
|
||||
static int cmi9880_get_multich_pins(struct hda_codec *codec)
|
||||
{
|
||||
struct cmi_spec *spec = codec->spec;
|
||||
int i, j, pins, seq[4];
|
||||
int max_channel = 0;
|
||||
unsigned int def_conf, sequence;
|
||||
hda_nid_t nid;
|
||||
|
||||
memset(spec->multich_pin, 0, sizeof(spec->multich_pin));
|
||||
for (pins = 0, i = 0; i < spec->pin_def_confs && pins < 4; i++) {
|
||||
def_conf = spec->def_conf[i];
|
||||
/* skip pin not connected */
|
||||
if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE)
|
||||
continue;
|
||||
/* get the sequence if association == 1 */
|
||||
/* the other pins have association = 0, incorrect in spec 1.0 */
|
||||
if (get_defcfg_association(def_conf) == 1) {
|
||||
sequence = get_defcfg_sequence(def_conf);
|
||||
seq[pins] = sequence;
|
||||
spec->multich_pin[pins] = spec->pin_nid[i];
|
||||
pins++; // ready for next slot
|
||||
max_channel += 2;
|
||||
}
|
||||
}
|
||||
/* sort by sequence, data collected here will be for Windows */
|
||||
for (i = 0; i < pins; i++) {
|
||||
for (j = i + 1; j < pins; j++) {
|
||||
if (seq[j] < seq[i]) {
|
||||
sequence = seq[j];
|
||||
nid = spec->multich_pin[j];
|
||||
seq[j] = seq[i];
|
||||
spec->multich_pin[j] = spec->multich_pin[i];
|
||||
seq[i] = sequence;
|
||||
spec->multich_pin[i] = nid;
|
||||
}
|
||||
}
|
||||
}
|
||||
/* the pin assignment is for front, C/LFE, surround and back */
|
||||
if (max_channel >= 6) {
|
||||
hda_nid_t temp;
|
||||
/* exchange pin of C/LFE and surround */
|
||||
temp = spec->multich_pin[1];
|
||||
spec->multich_pin[1] = spec->multich_pin[2];
|
||||
spec->multich_pin[2] = temp;
|
||||
}
|
||||
return max_channel;
|
||||
}
|
||||
|
||||
/* fill in the multi_dac_nids table, which will decide
|
||||
which audio widget to use for each channel */
|
||||
static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec)
|
||||
static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
|
||||
{
|
||||
struct cmi_spec *spec = codec->spec;
|
||||
hda_nid_t nid;
|
||||
|
|
@ -470,32 +392,34 @@ static int cmi9880_fill_multi_dac_nids(struct hda_codec *codec)
|
|||
memset(spec->dac_nids, 0, sizeof(spec->dac_nids));
|
||||
memset(assigned, 0, sizeof(assigned));
|
||||
/* check the pins we found */
|
||||
for (i = 0; i < spec->multiout.max_channels / 2; i++) {
|
||||
nid = spec->multich_pin[i];
|
||||
for (i = 0; i < cfg->line_outs; i++) {
|
||||
nid = cfg->line_out_pins[i];
|
||||
/* nid 0x0b~0x0e is hardwired to audio widget 0x3~0x6 */
|
||||
if (nid <= 0x0e && nid >= 0x0b) {
|
||||
spec->dac_nids[i] = nid - 0x08;
|
||||
if (nid >= 0x0b && nid <= 0x0e) {
|
||||
spec->dac_nids[i] = (nid - 0x0b) + 0x03;
|
||||
assigned[nid - 0x0b] = 1;
|
||||
}
|
||||
}
|
||||
/* left pin can be connect to any audio widget */
|
||||
for (i = 0; i < spec->multiout.max_channels / 2; i++) {
|
||||
if (!assigned[i]) {
|
||||
/* search for an empty channel */
|
||||
/* I should also check the pin type */
|
||||
for (j = 0; j < ARRAY_SIZE(spec->dac_nids); j++)
|
||||
if (! spec->dac_nids[j]) {
|
||||
spec->dac_nids[j] = i + 3;
|
||||
assigned[i] = 1;
|
||||
break;
|
||||
}
|
||||
for (i = 0; i < cfg->line_outs; i++) {
|
||||
nid = cfg->line_out_pins[i];
|
||||
if (nid <= 0x0e)
|
||||
continue;
|
||||
/* search for an empty channel */
|
||||
for (j = 0; j < cfg->line_outs; j++) {
|
||||
if (! assigned[j]) {
|
||||
spec->dac_nids[i] = i + 0x03;
|
||||
assigned[j] = 1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
spec->num_dacs = cfg->line_outs;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* create multi_init table, which is used for multichannel initialization */
|
||||
static int cmi9880_fill_multi_init(struct hda_codec *codec)
|
||||
static int cmi9880_fill_multi_init(struct hda_codec *codec, const struct auto_pin_cfg *cfg)
|
||||
{
|
||||
struct cmi_spec *spec = codec->spec;
|
||||
hda_nid_t nid;
|
||||
|
|
@ -503,29 +427,26 @@ static int cmi9880_fill_multi_init(struct hda_codec *codec)
|
|||
|
||||
/* clear the table, only one c-media dac assumed here */
|
||||
memset(spec->multi_init, 0, sizeof(spec->multi_init));
|
||||
for (j = 0, i = 0; i < spec->multiout.max_channels / 2; i++) {
|
||||
for (j = 0, i = 0; i < cfg->line_outs; i++) {
|
||||
hda_nid_t conn[4];
|
||||
nid = spec->multich_pin[i];
|
||||
nid = cfg->line_out_pins[i];
|
||||
/* set as output */
|
||||
spec->multi_init[j].nid = nid;
|
||||
spec->multi_init[j].verb = AC_VERB_SET_PIN_WIDGET_CONTROL;
|
||||
spec->multi_init[j].param = 0xc0;
|
||||
spec->multi_init[j].param = PIN_OUT;
|
||||
j++;
|
||||
/* nid 0x0f,0x10,0x1f,0x20 are needed to set connection */
|
||||
switch (nid) {
|
||||
case 0x0f:
|
||||
case 0x10:
|
||||
case 0x1f:
|
||||
case 0x20:
|
||||
if (nid > 0x0e) {
|
||||
/* set connection */
|
||||
spec->multi_init[j].nid = nid;
|
||||
spec->multi_init[j].verb = AC_VERB_SET_CONNECT_SEL;
|
||||
spec->multi_init[j].param = 0;
|
||||
/* find the index in connect list */
|
||||
len = snd_hda_get_connections(codec, nid, conn, 4);
|
||||
for (k = 0; k < len; k++)
|
||||
if (conn[k] == spec->dac_nids[i])
|
||||
if (conn[k] == spec->dac_nids[i]) {
|
||||
spec->multi_init[j].param = j;
|
||||
break;
|
||||
spec->multi_init[j].param = k < len ? k : 0;
|
||||
}
|
||||
j++;
|
||||
break;
|
||||
}
|
||||
|
|
@ -759,6 +680,7 @@ static int patch_cmi9880(struct hda_codec *codec)
|
|||
|
||||
/* copy default DAC NIDs */
|
||||
memcpy(spec->dac_nids, cmi9880_dac_nids, sizeof(spec->dac_nids));
|
||||
spec->num_dacs = 4;
|
||||
|
||||
switch (spec->board_config) {
|
||||
case CMI_MINIMAL:
|
||||
|
|
@ -795,18 +717,16 @@ static int patch_cmi9880(struct hda_codec *codec)
|
|||
{
|
||||
unsigned int port_e, port_f, port_g, port_h;
|
||||
unsigned int port_spdifi, port_spdifo;
|
||||
int max_channels;
|
||||
struct auto_pin_cfg cfg;
|
||||
|
||||
/* collect pin default configuration */
|
||||
cmi9880_get_pin_def_config(codec);
|
||||
port_e = cmi9880_get_def_config(codec, 0x0f);
|
||||
port_f = cmi9880_get_def_config(codec, 0x10);
|
||||
port_g = cmi9880_get_def_config(codec, 0x1f);
|
||||
port_h = cmi9880_get_def_config(codec, 0x20);
|
||||
port_spdifi = cmi9880_get_def_config(codec, 0x13);
|
||||
port_spdifo = cmi9880_get_def_config(codec, 0x12);
|
||||
port_e = snd_hda_codec_read(codec, 0x0f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
|
||||
port_f = snd_hda_codec_read(codec, 0x10, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
|
||||
spec->front_panel = 1;
|
||||
if (get_defcfg_connect(port_e) == AC_JACK_PORT_NONE ||
|
||||
get_defcfg_connect(port_f) == AC_JACK_PORT_NONE) {
|
||||
port_g = snd_hda_codec_read(codec, 0x1f, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
|
||||
port_h = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
|
||||
spec->surr_switch = 1;
|
||||
/* no front panel */
|
||||
if (get_defcfg_connect(port_g) == AC_JACK_PORT_NONE ||
|
||||
|
|
@ -824,24 +744,26 @@ static int patch_cmi9880(struct hda_codec *codec)
|
|||
spec->multiout.max_channels = cmi9880_channel_modes[0].channels;
|
||||
} else {
|
||||
spec->input_mux = &cmi9880_basic_mux;
|
||||
port_spdifi = snd_hda_codec_read(codec, 0x13, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
|
||||
port_spdifo = snd_hda_codec_read(codec, 0x12, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
|
||||
if (get_defcfg_connect(port_spdifo) != AC_JACK_PORT_NONE)
|
||||
spec->multiout.dig_out_nid = CMI_DIG_OUT_NID;
|
||||
if (get_defcfg_connect(port_spdifi) != AC_JACK_PORT_NONE)
|
||||
spec->dig_in_nid = CMI_DIG_IN_NID;
|
||||
spec->multiout.max_channels = 8;
|
||||
}
|
||||
max_channels = cmi9880_get_multich_pins(codec);
|
||||
if (max_channels > 0) {
|
||||
spec->multiout.max_channels = max_channels;
|
||||
cmi9880_fill_multi_dac_nids(codec);
|
||||
cmi9880_fill_multi_init(codec);
|
||||
snd_hda_parse_pin_def_config(codec, &cfg);
|
||||
if (cfg.line_outs) {
|
||||
spec->multiout.max_channels = cfg.line_outs * 2;
|
||||
cmi9880_fill_multi_dac_nids(codec, &cfg);
|
||||
cmi9880_fill_multi_init(codec, &cfg);
|
||||
} else
|
||||
snd_printd("patch_cmedia: cannot detect association in defcfg\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
spec->multiout.num_dacs = 4;
|
||||
spec->multiout.num_dacs = spec->num_dacs;
|
||||
spec->multiout.dac_nids = spec->dac_nids;
|
||||
|
||||
spec->adc_nids = cmi9880_adc_nids;
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue