dt-bindings: iio: dac: Add docs for AD5770R DAC
Adding dt-bindings documentation for AD5770R DAC. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
parent
cbbb819837
commit
ea52c21268
185
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
Normal file
185
Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
Normal file
|
@ -0,0 +1,185 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
# Copyright 2020 Analog Devices Inc.
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Analog Devices AD5770R DAC device driver
|
||||
|
||||
maintainers:
|
||||
- Mircea Caprioru <mircea.caprioru@analog.com>
|
||||
|
||||
description: |
|
||||
Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
|
||||
found here:
|
||||
https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- adi,ad5770r
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
avdd-supply:
|
||||
description:
|
||||
AVdd voltage supply. Represents two different supplies in the datasheet
|
||||
that are in fact the same.
|
||||
|
||||
iovdd-supply:
|
||||
description:
|
||||
Voltage supply for the chip interface.
|
||||
|
||||
vref-supply:
|
||||
description: Specify the voltage of the external reference used.
|
||||
Available reference options are 1.25 V or 2.5 V. If no
|
||||
external reference declared then the device will use the
|
||||
internal reference of 1.25 V.
|
||||
|
||||
adi,external-resistor:
|
||||
description: Specify if an external 2.5k ohm resistor is used. If not
|
||||
specified the device will use an internal 2.5k ohm resistor.
|
||||
The precision resistor is used for reference current generation.
|
||||
type: boolean
|
||||
|
||||
reset-gpios:
|
||||
description: GPIO spec for the RESET pin. If specified, it will be
|
||||
asserted during driver probe.
|
||||
maxItems: 1
|
||||
|
||||
channel0:
|
||||
description: Represents an external channel which are
|
||||
connected to the DAC. Channel 0 can act both as a current
|
||||
source and sink.
|
||||
type: object
|
||||
|
||||
properties:
|
||||
num:
|
||||
description: This represents the channel number.
|
||||
items:
|
||||
const: 0
|
||||
|
||||
adi,range-microamp:
|
||||
description: Output range of the channel.
|
||||
oneOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/int32-array
|
||||
- items:
|
||||
- enum: [0 300000]
|
||||
- enum: [-60000 0]
|
||||
- enum: [-60000 300000]
|
||||
|
||||
channel1:
|
||||
description: Represents an external channel which are
|
||||
connected to the DAC.
|
||||
type: object
|
||||
|
||||
properties:
|
||||
num:
|
||||
description: This represents the channel number.
|
||||
items:
|
||||
const: 1
|
||||
|
||||
adi,range-microamp:
|
||||
description: Output range of the channel.
|
||||
oneOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
- items:
|
||||
- enum: [0 140000]
|
||||
- enum: [0 250000]
|
||||
|
||||
channel2:
|
||||
description: Represents an external channel which are
|
||||
connected to the DAC.
|
||||
type: object
|
||||
|
||||
properties:
|
||||
num:
|
||||
description: This represents the channel number.
|
||||
items:
|
||||
const: 2
|
||||
|
||||
adi,range-microamp:
|
||||
description: Output range of the channel.
|
||||
oneOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
- items:
|
||||
- enum: [0 140000]
|
||||
- enum: [0 250000]
|
||||
|
||||
patternProperties:
|
||||
"^channel@([3-5])$":
|
||||
type: object
|
||||
description: Represents the external channels which are connected to the DAC.
|
||||
properties:
|
||||
num:
|
||||
description: This represents the channel number.
|
||||
items:
|
||||
minimum: 3
|
||||
maximum: 5
|
||||
|
||||
adi,range-microamp:
|
||||
description: Output range of the channel.
|
||||
oneOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
- items:
|
||||
- enum: [0 45000]
|
||||
- enum: [0 100000]
|
||||
|
||||
required:
|
||||
- reg
|
||||
- diff-channels
|
||||
- channel0
|
||||
- channel1
|
||||
- channel2
|
||||
- channel3
|
||||
- channel4
|
||||
- channel5
|
||||
|
||||
examples:
|
||||
- |
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ad5770r@0 {
|
||||
compatible = "ad5770r";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
vref-supply = <&vref>;
|
||||
adi,external-resistor;
|
||||
reset-gpios = <&gpio 22 0>;
|
||||
|
||||
channel@0 {
|
||||
num = <0>;
|
||||
adi,range-microamp = <(-60000) 300000>;
|
||||
};
|
||||
|
||||
channel@1 {
|
||||
num = <1>;
|
||||
adi,range-microamp = <0 140000>;
|
||||
};
|
||||
|
||||
channel@2 {
|
||||
num = <2>;
|
||||
adi,range-microamp = <0 55000>;
|
||||
};
|
||||
|
||||
channel@3 {
|
||||
num = <3>;
|
||||
adi,range-microamp = <0 45000>;
|
||||
};
|
||||
|
||||
channel@4 {
|
||||
num = <4>;
|
||||
adi,range-microamp = <0 45000>;
|
||||
};
|
||||
|
||||
channel@5 {
|
||||
num = <5>;
|
||||
adi,range-microamp = <0 45000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
Loading…
Reference in a new issue