[ALSA] sparc dbri: SMP fixes
The dbri driver hangs when used in kernel compiled with SMP support due to inproper locking. The patch fixes it. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>hifive-unleashed-5.1
Krzysztof Helt
Jaroslav Kysela
parent
679e28eef8
commit
ea543f1ee6
|
|
@ -635,10 +635,16 @@ to send them to the DBRI.
|
|||
static void dbri_cmdwait(struct snd_dbri *dbri)
|
||||
{
|
||||
int maxloops = MAXLOOPS;
|
||||
unsigned long flags;
|
||||
|
||||
/* Delay if previous commands are still being processed */
|
||||
while ((--maxloops) > 0 && (sbus_readl(dbri->regs + REG0) & D_P))
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
while ((--maxloops) > 0 && (sbus_readl(dbri->regs + REG0) & D_P)) {
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
msleep_interruptible(1);
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
}
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
|
||||
if (maxloops == 0) {
|
||||
printk(KERN_ERR "DBRI: Chip never completed command buffer\n");
|
||||
|
|
@ -671,11 +677,12 @@ static s32 *dbri_cmdlock(struct snd_dbri * dbri, int len)
|
|||
* the last WAIT cmd and force DBRI to reread the cmd.
|
||||
* The JUMP cmd points to the new cmd string.
|
||||
* It also releases the cmdlock spinlock.
|
||||
*
|
||||
* Lock must not be held before calling this.
|
||||
*/
|
||||
static void dbri_cmdsend(struct snd_dbri * dbri, s32 * cmd,int len)
|
||||
{
|
||||
s32 tmp, addr;
|
||||
unsigned long flags;
|
||||
static int wait_id = 0;
|
||||
|
||||
wait_id++;
|
||||
|
|
@ -706,12 +713,10 @@ static void dbri_cmdsend(struct snd_dbri * dbri, s32 * cmd,int len)
|
|||
}
|
||||
#endif
|
||||
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
/* Reread the last command */
|
||||
tmp = sbus_readl(dbri->regs + REG0);
|
||||
tmp |= D_P;
|
||||
sbus_writel(tmp, dbri->regs + REG0);
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
|
||||
dbri->cmdptr = cmd;
|
||||
spin_unlock(&dbri->cmdlock);
|
||||
|
|
@ -777,9 +782,9 @@ static void dbri_initialize(struct snd_dbri * dbri)
|
|||
dma_addr = dbri->dma_dvma + dbri_dma_off(cmd, 0);
|
||||
sbus_writel(dma_addr, dbri->regs + REG8);
|
||||
spin_unlock(&dbri->cmdlock);
|
||||
dbri_cmdwait(dbri);
|
||||
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
dbri_cmdwait(dbri);
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
@ -840,6 +845,9 @@ static void reset_pipe(struct snd_dbri * dbri, int pipe)
|
|||
dbri->pipes[pipe].first_desc = -1;
|
||||
}
|
||||
|
||||
/*
|
||||
* Lock must be held before calling this.
|
||||
*/
|
||||
static void setup_pipe(struct snd_dbri * dbri, int pipe, int sdp)
|
||||
{
|
||||
if (pipe < 0 || pipe > DBRI_MAX_PIPE) {
|
||||
|
|
@ -866,6 +874,9 @@ static void setup_pipe(struct snd_dbri * dbri, int pipe, int sdp)
|
|||
reset_pipe(dbri, pipe);
|
||||
}
|
||||
|
||||
/*
|
||||
* Lock must be held before calling this.
|
||||
*/
|
||||
static void link_time_slot(struct snd_dbri * dbri, int pipe,
|
||||
int prevpipe, int nextpipe,
|
||||
int length, int cycle)
|
||||
|
|
@ -920,6 +931,10 @@ static void link_time_slot(struct snd_dbri * dbri, int pipe,
|
|||
dbri_cmdsend(dbri, cmd, 4);
|
||||
}
|
||||
|
||||
#if 0
|
||||
/*
|
||||
* Lock must be held before calling this.
|
||||
*/
|
||||
static void unlink_time_slot(struct snd_dbri * dbri, int pipe,
|
||||
enum in_or_out direction, int prevpipe,
|
||||
int nextpipe)
|
||||
|
|
@ -952,6 +967,7 @@ static void unlink_time_slot(struct snd_dbri * dbri, int pipe,
|
|||
|
||||
dbri_cmdsend(dbri, cmd, 4);
|
||||
}
|
||||
#endif
|
||||
|
||||
/* xmit_fixed() / recv_fixed()
|
||||
*
|
||||
|
|
@ -965,11 +981,14 @@ static void unlink_time_slot(struct snd_dbri * dbri, int pipe,
|
|||
* the actual time slot is. The interrupt handler takes care of bit
|
||||
* ordering and alignment. An 8-bit time slot will always end up
|
||||
* in the low-order 8 bits, filled either MSB-first or LSB-first,
|
||||
* depending on the settings passed to setup_pipe()
|
||||
* depending on the settings passed to setup_pipe().
|
||||
*
|
||||
* Lock must not be held before calling it.
|
||||
*/
|
||||
static void xmit_fixed(struct snd_dbri * dbri, int pipe, unsigned int data)
|
||||
{
|
||||
s32 *cmd;
|
||||
unsigned long flags;
|
||||
|
||||
if (pipe < 16 || pipe > DBRI_MAX_PIPE) {
|
||||
printk(KERN_ERR "DBRI: xmit_fixed: Illegal pipe number\n");
|
||||
|
|
@ -1002,8 +1021,11 @@ static void xmit_fixed(struct snd_dbri * dbri, int pipe, unsigned int data)
|
|||
*(cmd++) = data;
|
||||
*(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
|
||||
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
dbri_cmdsend(dbri, cmd, 3);
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
dbri_cmdwait(dbri);
|
||||
|
||||
}
|
||||
|
||||
static void recv_fixed(struct snd_dbri * dbri, int pipe, volatile __u32 * ptr)
|
||||
|
|
@ -1039,6 +1061,8 @@ static void recv_fixed(struct snd_dbri * dbri, int pipe, volatile __u32 * ptr)
|
|||
* be spread across multiple descriptors.
|
||||
*
|
||||
* All descriptors create a ring buffer.
|
||||
*
|
||||
* Lock must be held before calling this.
|
||||
*/
|
||||
static int setup_descs(struct snd_dbri * dbri, int streamno, unsigned int period)
|
||||
{
|
||||
|
|
@ -1186,6 +1210,9 @@ multiplexed serial interface which the DBRI can operate in either master
|
|||
|
||||
enum master_or_slave { CHImaster, CHIslave };
|
||||
|
||||
/*
|
||||
* Lock must not be held before calling it.
|
||||
*/
|
||||
static void reset_chi(struct snd_dbri * dbri, enum master_or_slave master_or_slave,
|
||||
int bits_per_frame)
|
||||
{
|
||||
|
|
@ -1258,9 +1285,14 @@ static void reset_chi(struct snd_dbri * dbri, enum master_or_slave master_or_sla
|
|||
In the standard SPARC audio configuration, the CS4215 codec is attached
|
||||
to the DBRI via the CHI interface and few of the DBRI's PIO pins.
|
||||
|
||||
* Lock must not be held before calling it.
|
||||
|
||||
*/
|
||||
static void cs4215_setup_pipes(struct snd_dbri * dbri)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
/*
|
||||
* Data mode:
|
||||
* Pipe 4: Send timeslots 1-4 (audio data)
|
||||
|
|
@ -1284,6 +1316,7 @@ static void cs4215_setup_pipes(struct snd_dbri * dbri)
|
|||
setup_pipe(dbri, 17, D_SDP_FIXED | D_SDP_TO_SER | D_SDP_MSB);
|
||||
setup_pipe(dbri, 18, D_SDP_FIXED | D_SDP_FROM_SER | D_SDP_MSB);
|
||||
setup_pipe(dbri, 19, D_SDP_FIXED | D_SDP_FROM_SER | D_SDP_MSB);
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
|
||||
dbri_cmdwait(dbri);
|
||||
}
|
||||
|
|
@ -1358,6 +1391,7 @@ static void cs4215_open(struct snd_dbri * dbri)
|
|||
{
|
||||
int data_width;
|
||||
u32 tmp;
|
||||
unsigned long flags;
|
||||
|
||||
dprintk(D_MM, "cs4215_open: %d channels, %d bits\n",
|
||||
dbri->mm.channels, dbri->mm.precision);
|
||||
|
|
@ -1382,6 +1416,7 @@ static void cs4215_open(struct snd_dbri * dbri)
|
|||
* bits. The CS4215, it seems, observes TSIN (the delayed signal)
|
||||
* even if it's the CHI master. Don't ask me...
|
||||
*/
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
tmp = sbus_readl(dbri->regs + REG0);
|
||||
tmp &= ~(D_C); /* Disable CHI */
|
||||
sbus_writel(tmp, dbri->regs + REG0);
|
||||
|
|
@ -1409,6 +1444,7 @@ static void cs4215_open(struct snd_dbri * dbri)
|
|||
tmp = sbus_readl(dbri->regs + REG0);
|
||||
tmp |= D_C; /* Enable CHI */
|
||||
sbus_writel(tmp, dbri->regs + REG0);
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
|
||||
cs4215_setdata(dbri, 0);
|
||||
}
|
||||
|
|
@ -1420,6 +1456,7 @@ static int cs4215_setctrl(struct snd_dbri * dbri)
|
|||
{
|
||||
int i, val;
|
||||
u32 tmp;
|
||||
unsigned long flags;
|
||||
|
||||
/* FIXME - let the CPU do something useful during these delays */
|
||||
|
||||
|
|
@ -1456,6 +1493,7 @@ static int cs4215_setctrl(struct snd_dbri * dbri)
|
|||
* done in hardware by a TI 248 that delays the DBRI->4215
|
||||
* frame sync signal by eight clock cycles. Anybody know why?
|
||||
*/
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
tmp = sbus_readl(dbri->regs + REG0);
|
||||
tmp &= ~D_C; /* Disable CHI */
|
||||
sbus_writel(tmp, dbri->regs + REG0);
|
||||
|
|
@ -1472,14 +1510,17 @@ static int cs4215_setctrl(struct snd_dbri * dbri)
|
|||
link_time_slot(dbri, 17, 16, 16, 32, dbri->mm.offset);
|
||||
link_time_slot(dbri, 18, 16, 16, 8, dbri->mm.offset);
|
||||
link_time_slot(dbri, 19, 18, 16, 8, dbri->mm.offset + 48);
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
|
||||
/* Wait for the chip to echo back CLB (Control Latch Bit) as zero */
|
||||
dbri->mm.ctrl[0] &= ~CS4215_CLB;
|
||||
xmit_fixed(dbri, 17, *(int *)dbri->mm.ctrl);
|
||||
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
tmp = sbus_readl(dbri->regs + REG0);
|
||||
tmp |= D_C; /* Enable CHI */
|
||||
sbus_writel(tmp, dbri->regs + REG0);
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
|
||||
for (i = 10; ((dbri->mm.status & 0xe4) != 0x20); --i) {
|
||||
msleep_interruptible(1);
|
||||
|
|
@ -1688,6 +1729,7 @@ static void xmit_descs(struct snd_dbri *dbri)
|
|||
dbri->pipes[info->pipe].desc = first_td;
|
||||
}
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
}
|
||||
|
||||
|
|
@ -2093,7 +2135,6 @@ static int snd_dbri_prepare(struct snd_pcm_substream *substream)
|
|||
{
|
||||
struct snd_dbri *dbri = snd_pcm_substream_chip(substream);
|
||||
struct dbri_streaminfo *info = DBRI_STREAM(dbri, substream);
|
||||
struct snd_pcm_runtime *runtime = substream->runtime;
|
||||
int ret;
|
||||
|
||||
info->size = snd_pcm_lib_buffer_bytes(substream);
|
||||
|
|
@ -2232,7 +2273,6 @@ static int snd_cs4215_put_volume(struct snd_kcontrol *kcontrol,
|
|||
{
|
||||
struct snd_dbri *dbri = snd_kcontrol_chip(kcontrol);
|
||||
struct dbri_streaminfo *info = &dbri->stream_info[kcontrol->private_value];
|
||||
unsigned long flags;
|
||||
int changed = 0;
|
||||
|
||||
if (info->left_gain != ucontrol->value.integer.value[0]) {
|
||||
|
|
@ -2247,13 +2287,9 @@ static int snd_cs4215_put_volume(struct snd_kcontrol *kcontrol,
|
|||
/* First mute outputs, and wait 1/8000 sec (125 us)
|
||||
* to make sure this takes. This avoids clicking noises.
|
||||
*/
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
|
||||
cs4215_setdata(dbri, 1);
|
||||
udelay(125);
|
||||
cs4215_setdata(dbri, 0);
|
||||
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
}
|
||||
return changed;
|
||||
}
|
||||
|
|
@ -2300,7 +2336,6 @@ static int snd_cs4215_put_single(struct snd_kcontrol *kcontrol,
|
|||
struct snd_ctl_elem_value *ucontrol)
|
||||
{
|
||||
struct snd_dbri *dbri = snd_kcontrol_chip(kcontrol);
|
||||
unsigned long flags;
|
||||
int elem = kcontrol->private_value & 0xff;
|
||||
int shift = (kcontrol->private_value >> 8) & 0xff;
|
||||
int mask = (kcontrol->private_value >> 16) & 0xff;
|
||||
|
|
@ -2333,13 +2368,9 @@ static int snd_cs4215_put_single(struct snd_kcontrol *kcontrol,
|
|||
/* First mute outputs, and wait 1/8000 sec (125 us)
|
||||
* to make sure this takes. This avoids clicking noises.
|
||||
*/
|
||||
spin_lock_irqsave(&dbri->lock, flags);
|
||||
|
||||
cs4215_setdata(dbri, 1);
|
||||
udelay(125);
|
||||
cs4215_setdata(dbri, 0);
|
||||
|
||||
spin_unlock_irqrestore(&dbri->lock, flags);
|
||||
}
|
||||
return changed;
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue