1
0
Fork 0

pcmcia: re-work pcmcia_request_irq()

Instead of the old pcmcia_request_irq() interface, drivers may now
choose between:

- calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq.

- use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will
  clean up automatically on calls to pcmcia_disable_device() or
  device ejection.

- drivers still not capable of IRQF_SHARED (or not telling us so) may
  use the deprecated pcmcia_request_exclusive_irq() for the time
  being; they might receive a shared IRQ nonetheless.

CC: linux-bluetooth@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-usb@vger.kernel.org
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
hifive-unleashed-5.1
Dominik Brodowski 2010-03-07 12:21:16 +01:00
parent a7debe789d
commit eb14120f74
58 changed files with 244 additions and 593 deletions

View File

@ -1,4 +1,14 @@
This file details changes in 2.6 which affect PCMCIA card driver authors:
* New IRQ request rules (as of 2.6.35)
Instead of the old pcmcia_request_irq() interface, drivers may now
choose between:
- calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq.
- use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will
clean up automatically on calls to pcmcia_disable_device() or
device ejection.
- drivers still not capable of IRQF_SHARED (or not telling us so) may
use the deprecated pcmcia_request_exclusive_irq() for the time
being; they might receive a shared IRQ nonetheless.
* no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33)
Instead of the cs_error() callback or the CS_CHECK() macro, please use

View File

@ -268,7 +268,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
pdev->io.IOAddrLines = 3;
pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
pdev->conf.Attributes = CONF_ENABLE_IRQ;
pdev->conf.IntType = INT_MEMORY_AND_IO;
@ -293,8 +292,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
}
io_base = pdev->io.BasePort1;
ctl_base = stk->ctl_base;
ret = pcmcia_request_irq(pdev, &pdev->irq);
if (ret)
if (!pdev->irq)
goto failed;
ret = pcmcia_request_configuration(pdev, &pdev->conf);
@ -344,7 +342,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
}
/* activate */
ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
ret = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &pcmcia_sht);
if (ret)
goto failed;

View File

@ -869,9 +869,6 @@ static int bluecard_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = bluecard_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -908,9 +905,9 @@ static int bluecard_config(struct pcmcia_device *link)
if (i != 0)
goto failed;
i = pcmcia_request_irq(link, &link->irq);
i = pcmcia_request_irq(link, bluecard_interrupt);
if (i != 0)
link->irq.AssignedIRQ = 0;
goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)

View File

@ -661,9 +661,6 @@ static int bt3c_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = bt3c_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -743,9 +740,9 @@ static int bt3c_config(struct pcmcia_device *link)
goto failed;
found_port:
i = pcmcia_request_irq(link, &link->irq);
i = pcmcia_request_irq(link, &bt3c_interrupt);
if (i != 0)
link->irq.AssignedIRQ = 0;
goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)

View File

@ -590,9 +590,6 @@ static int btuart_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = btuart_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -672,9 +669,9 @@ static int btuart_config(struct pcmcia_device *link)
goto failed;
found_port:
i = pcmcia_request_irq(link, &link->irq);
i = pcmcia_request_irq(link, btuart_interrupt);
if (i != 0)
link->irq.AssignedIRQ = 0;
goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)

View File

@ -575,9 +575,6 @@ static int dtl1_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = dtl1_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -621,9 +618,9 @@ static int dtl1_config(struct pcmcia_device *link)
if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0)
goto failed;
i = pcmcia_request_irq(link, &link->irq);
i = pcmcia_request_irq(link, dtl1_interrupt);
if (i != 0)
link->irq.AssignedIRQ = 0;
goto failed;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)

View File

@ -195,9 +195,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = ipwireless_interrupt;
INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
ipwireless_init_hardware_v1(ipw->hardware, link->io.BasePort1,
@ -205,8 +202,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
ipw->is_v2_card, signalled_reboot_callback,
ipw);
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, ipwireless_interrupt);
if (ret != 0)
goto exit;
@ -217,7 +213,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
(unsigned int) link->io.BasePort1,
(unsigned int) (link->io.BasePort1 +
link->io.NumPorts1 - 1),
(unsigned int) link->irq.AssignedIRQ);
(unsigned int) link->irq);
if (ipw->attr_memory && ipw->common_memory)
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
": attr memory 0x%08lx-0x%08lx, common memory 0x%08lx-0x%08lx\n",
@ -271,8 +267,6 @@ exit:
static void release_ipwireless(struct ipw_dev *ipw)
{
pcmcia_disable_device(ipw->link);
if (ipw->common_memory) {
release_mem_region(ipw->request_common_memory.Base,
ipw->request_common_memory.Size);
@ -288,7 +282,6 @@ static void release_ipwireless(struct ipw_dev *ipw)
if (ipw->attr_memory)
pcmcia_release_window(ipw->link, ipw->handle_attr_memory);
/* Break the link with Card Services */
pcmcia_disable_device(ipw->link);
}

View File

@ -552,10 +552,6 @@ static int mgslpc_probe(struct pcmcia_device *link)
/* Initialize the struct pcmcia_device structure */
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = NULL;
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -608,9 +604,7 @@ static int mgslpc_config(struct pcmcia_device *link)
link->conf.ConfigIndex = 8;
link->conf.Present = PRESENT_OPTION;
link->irq.Handler = mgslpc_isr;
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, mgslpc_isr);
if (ret)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@ -618,7 +612,7 @@ static int mgslpc_config(struct pcmcia_device *link)
goto failed;
info->io_base = link->io.BasePort1;
info->irq_level = link->irq.AssignedIRQ;
info->irq_level = link->irq;
/* add to linked list of devices */
sprintf(info->node.dev_name, "mgslpc0");
@ -628,7 +622,7 @@ static int mgslpc_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x:",
info->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);

View File

@ -102,7 +102,6 @@ static int ide_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = 3;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -285,8 +284,7 @@ static int ide_config(struct pcmcia_device *link)
io_base = link->io.BasePort1;
ctl_base = stk->ctl_base;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
@ -299,11 +297,11 @@ static int ide_config(struct pcmcia_device *link)
if (is_kme)
outb(0x81, ctl_base+1);
host = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
host = idecs_register(io_base, ctl_base, link->irq, link);
if (host == NULL && link->io.NumPorts1 == 0x20) {
outb(0x02, ctl_base + 0x10);
host = idecs_register(io_base + 0x10, ctl_base + 0x10,
link->irq.AssignedIRQ, link);
link->irq, link);
}
if (host == NULL)

View File

@ -107,9 +107,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.NumPorts2 = 0;
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@ -172,7 +169,7 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev,
static int avmcs_config(struct pcmcia_device *link)
{
local_info_t *dev;
int i;
int i = -1;
char devname[128];
int cardtype;
int (*addcard)(unsigned int port, unsigned irq);
@ -190,11 +187,7 @@ static int avmcs_config(struct pcmcia_device *link)
return -ENODEV;
do {
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
if (!link->irq) {
/* undo */
pcmcia_disable_device(link);
break;
@ -249,9 +242,9 @@ static int avmcs_config(struct pcmcia_device *link)
default:
case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
}
if ((i = (*addcard)(link->io.BasePort1, link->irq.AssignedIRQ)) < 0) {
if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) {
printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n",
dev->node.dev_name, link->io.BasePort1, link->irq.AssignedIRQ);
dev->node.dev_name, link->io.BasePort1, link->irq);
avmcs_release(link);
return -ENODEV;
}
@ -270,7 +263,7 @@ static int avmcs_config(struct pcmcia_device *link)
static void avmcs_release(struct pcmcia_device *link)
{
b1pcmcia_delcard(link->io.BasePort1, link->irq.AssignedIRQ);
b1pcmcia_delcard(link->io.BasePort1, link->irq);
pcmcia_disable_device(link);
} /* avmcs_release */

View File

@ -119,9 +119,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
p_dev->io.IOAddrLines = 5;
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@ -177,7 +174,7 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev,
static int __devinit avma1cs_config(struct pcmcia_device *link)
{
local_info_t *dev;
int i;
int i = -1;
char devname[128];
IsdnCard_t icard;
int busy = 0;
@ -197,8 +194,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
if (!link->irq) {
/* undo */
pcmcia_disable_device(link);
break;
@ -230,9 +226,9 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
}
printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
link->io.BasePort1, link->irq.AssignedIRQ);
link->io.BasePort1, link->irq);
icard.para[0] = link->irq.AssignedIRQ;
icard.para[0] = link->irq;
icard.para[1] = link->io.BasePort1;
icard.protocol = isdnprot;
icard.typ = ISDN_CTYPE_A1_PCMCIA;

View File

@ -136,10 +136,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
local->cardnr = -1;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -223,11 +219,8 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
if (i != 0)
goto failed;
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
link->irq.AssignedIRQ = 0;
if (!link->irq)
goto failed;
}
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
@ -244,7 +237,7 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x: ",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
@ -253,7 +246,7 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
icard.para[0] = link->irq.AssignedIRQ;
icard.para[0] = link->irq;
icard.para[1] = link->io.BasePort1;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_ELSA_PCMCIA;

View File

@ -143,10 +143,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -227,9 +223,7 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -312,17 +306,6 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
if (ret)
goto failed;
/*
Allocate an interrupt line. Note that this does not assign a
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
@ -346,7 +329,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
@ -358,7 +341,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
req->Base+req->Size-1);
printk("\n");
icard.para[0] = link->irq.AssignedIRQ;
icard.para[0] = link->irq;
icard.para[1] = link->io.BasePort1;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;

View File

@ -126,10 +126,6 @@ static int __devinit teles_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -213,11 +209,8 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
if (i != 0)
goto cs_failed;
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
link->irq.AssignedIRQ = 0;
if (!link->irq)
goto cs_failed;
}
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
@ -234,7 +227,7 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x:",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
@ -243,7 +236,7 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
icard.para[0] = link->irq.AssignedIRQ;
icard.para[0] = link->irq;
icard.para[1] = link->io.BasePort1;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_TELESPCMCIA;

View File

@ -283,8 +283,6 @@ static int tc574_probe(struct pcmcia_device *link)
spin_lock_init(&lp->window_lock);
link->io.NumPorts1 = 32;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = &el3_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@ -353,7 +351,7 @@ static int tc574_config(struct pcmcia_device *link)
if (i != 0)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, el3_interrupt);
if (ret)
goto failed;
@ -361,7 +359,7 @@ static int tc574_config(struct pcmcia_device *link)
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
ioaddr = dev->base_addr;

View File

@ -194,8 +194,7 @@ static int tc589_probe(struct pcmcia_device *link)
spin_lock_init(&lp->lock);
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = &el3_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@ -271,7 +270,7 @@ static int tc589_config(struct pcmcia_device *link)
if (i != 0)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, el3_interrupt);
if (ret)
goto failed;
@ -279,7 +278,7 @@ static int tc589_config(struct pcmcia_device *link)
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
ioaddr = dev->base_addr;
EL3WINDOW(0);

View File

@ -168,7 +168,6 @@ static int axnet_probe(struct pcmcia_device *link)
info = PRIV(dev);
info->p_dev = link;
link->priv = dev;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -265,12 +264,9 @@ static int try_io_port(struct pcmcia_device *link)
int j, ret;
if (link->io.NumPorts1 == 32) {
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (link->io.NumPorts2 > 0) {
/* for master/slave multifunction cards */
/* for master/slave multifunction cards */
if (link->io.NumPorts2 > 0)
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING;
}
} else {
/* This should be two 16-port windows */
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
@ -336,8 +332,7 @@ static int axnet_config(struct pcmcia_device *link)
if (ret != 0)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
if (!link->irq)
goto failed;
if (link->io.NumPorts2 == 8) {
@ -349,7 +344,7 @@ static int axnet_config(struct pcmcia_device *link)
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
if (!get_prom(link)) {

View File

@ -163,7 +163,6 @@ static int com20020_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.NumPorts1 = 16;
p_dev->io.IOAddrLines = 16;
p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@ -275,15 +274,14 @@ static int com20020_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
dev_dbg(&link->dev, "request IRQ %d\n",
link->irq.AssignedIRQ);
i = pcmcia_request_irq(link, &link->irq);
if (i != 0)
link->irq);
if (!link->irq)
{
dev_dbg(&link->dev, "requestIRQ failed totally!\n");
goto failed;
}
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)

View File

@ -254,10 +254,6 @@ static int fmvj18x_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 5;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = fjn_interrupt;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -425,8 +421,6 @@ static int fmvj18x_config(struct pcmcia_device *link)
}
if (link->io.NumPorts2 != 0) {
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING;
ret = mfc_try_io_port(link);
if (ret != 0) goto failed;
} else if (cardtype == UNGERMANN) {
@ -437,14 +431,14 @@ static int fmvj18x_config(struct pcmcia_device *link)
if (ret)
goto failed;
}
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, fjn_interrupt);
if (ret)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
if (link->io.BasePort2 != 0) {

View File

@ -156,8 +156,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 4;
link->io.IOAddrLines = 16;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.Handler = ibmtr_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@ -238,11 +236,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
}
dev->base_addr = link->io.BasePort1;
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt);
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
ti->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
ti->irq = link->irq;
ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
/* Allocate the MMIO memory window */

View File

@ -463,8 +463,6 @@ static int nmclan_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 32;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 5;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.Handler = mace_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@ -652,14 +650,14 @@ static int nmclan_config(struct pcmcia_device *link)
ret = pcmcia_request_io(link, &link->io);
if (ret)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
if (ret)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
ioaddr = dev->base_addr;

View File

@ -264,7 +264,6 @@ static int pcnet_probe(struct pcmcia_device *link)
info->p_dev = link;
link->priv = dev;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -488,8 +487,6 @@ static int try_io_port(struct pcmcia_device *link)
if (link->io.NumPorts2 > 0) {
/* for master/slave multifunction cards */
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING;
}
} else {
/* This should be two 16-port windows */
@ -559,8 +556,7 @@ static int pcnet_config(struct pcmcia_device *link)
if (ret)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
if (!link->irq)
goto failed;
if (link->io.NumPorts2 == 8) {
@ -574,7 +570,7 @@ static int pcnet_config(struct pcmcia_device *link)
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
if (info->flags & HAS_MISC_REG) {
if ((if_port == 1) || (if_port == 2))

View File

@ -329,8 +329,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 4;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = &smc_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -453,7 +451,6 @@ static int mhz_mfc_config(struct pcmcia_device *link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->io.IOAddrLines = 16;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 8;
@ -652,7 +649,6 @@ static int osi_config(struct pcmcia_device *link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->io.NumPorts1 = 64;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 8;
@ -877,7 +873,7 @@ static int smc91c92_config(struct pcmcia_device *link)
if (i)
goto config_failed;
i = pcmcia_request_irq(link, &link->irq);
i = pcmcia_request_irq(link, smc_interrupt);
if (i)
goto config_failed;
i = pcmcia_request_configuration(link, &link->conf);
@ -887,7 +883,7 @@ static int smc91c92_config(struct pcmcia_device *link)
if (smc->manfid == MANFID_MOTOROLA)
mot_config(link);
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
if ((if_port >= 0) && (if_port <= 2))
dev->if_port = if_port;

View File

@ -555,7 +555,6 @@ xirc2ps_probe(struct pcmcia_device *link)
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->irq.Handler = xirc2ps_interrupt;
/* Fill in card specific entries */
dev->netdev_ops = &netdev_ops;
@ -841,7 +840,6 @@ xirc2ps_config(struct pcmcia_device * link)
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status |= CCSR_AUDIO_ENA;
}
link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
link->io.NumPorts2 = 8;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
@ -866,7 +864,6 @@ xirc2ps_config(struct pcmcia_device * link)
}
printk(KNOT_XIRC "no ports available\n");
} else {
link->irq.Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
link->io.NumPorts1 = 16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
link->io.BasePort1 = ioaddr;
@ -885,7 +882,7 @@ xirc2ps_config(struct pcmcia_device * link)
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
if ((err=pcmcia_request_irq(link, &link->irq)))
if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
goto config_error;
/****************
@ -982,7 +979,7 @@ xirc2ps_config(struct pcmcia_device * link)
printk(KNOT_XIRC "invalid if_port requested\n");
/* we can now register the device with the net subsystem */
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
if (local->dingo)

View File

@ -132,10 +132,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
dev_dbg(&p_dev->dev, "airo_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -212,9 +208,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -300,16 +294,8 @@ static int airo_config(struct pcmcia_device *link)
if (ret)
goto failed;
/*
Allocate an interrupt line. Note that this does not assign a
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
if (!link->irq)
goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@ -320,7 +306,7 @@ static int airo_config(struct pcmcia_device *link)
if (ret)
goto failed;
((local_info_t *)link->priv)->eth_dev =
init_airo_card(link->irq.AssignedIRQ,
init_airo_card(link->irq,
link->io.BasePort1, 1, &link->dev);
if (!((local_info_t *)link->priv)->eth_dev)
goto failed;
@ -338,8 +324,7 @@ static int airo_config(struct pcmcia_device *link)
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);

View File

@ -141,10 +141,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
dev_dbg(&p_dev->dev, "atmel_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -226,9 +222,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -278,15 +272,9 @@ static int atmel_config(struct pcmcia_device *link)
if (pcmcia_loop_config(link, atmel_config_check, NULL))
goto failed;
/*
Allocate an interrupt line. Note that this does not assign a
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
if (!link->irq) {
dev_err(&link->dev, "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
goto failed;
}
/*
@ -298,14 +286,8 @@ static int atmel_config(struct pcmcia_device *link)
if (ret)
goto failed;
if (link->irq.AssignedIRQ == 0) {
printk(KERN_ALERT
"atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
goto failed;
}
((local_info_t*)link->priv)->eth_dev =
init_atmel_card(link->irq.AssignedIRQ,
init_atmel_card(link->irq,
link->io.BasePort1,
did ? did->driver_info : ATMEL_FW_TYPE_NONE,
&link->dev,

View File

@ -98,10 +98,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
if (res != 0)
goto err_disable;
dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
dev->irq.Handler = NULL; /* The handler is registered later. */
res = pcmcia_request_irq(dev, &dev->irq);
if (res != 0)
if (!dev->irq)
goto err_disable;
res = pcmcia_request_configuration(dev, &dev->conf);

View File

@ -556,15 +556,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
/* At least Compaq WL200 does not have IRQInfo1 set,
* but it does not work without interrupts.. */
printk(KERN_WARNING "Config has no IRQ info, but trying to "
"enable IRQ anyway..\n");
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
}
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
@ -636,18 +628,9 @@ static int prism2_config(struct pcmcia_device *link)
strcpy(hw_priv->node.dev_name, dev->name);
link->dev_node = &hw_priv->node;
/*
* Allocate an interrupt line. Note that this does not assign a
* handler to the interrupt, unless the 'Handler' member of the
* irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = prism2_interrupt;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
ret = pcmcia_request_irq(link, prism2_interrupt);
if (ret)
goto failed;
/*
* This actually configures the PCMCIA socket -- setting up
@ -658,7 +641,7 @@ static int prism2_config(struct pcmcia_device *link)
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
/* Finally, report what we've done */
@ -668,7 +651,7 @@ static int prism2_config(struct pcmcia_device *link)
printk(", Vpp %d.%d", link->conf.Vpp / 10,
link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);

View File

@ -777,7 +777,7 @@ static void if_cs_release(struct pcmcia_device *p_dev)
lbs_deb_enter(LBS_DEB_CS);
free_irq(p_dev->irq.AssignedIRQ, card);
free_irq(p_dev->irq, card);
pcmcia_disable_device(p_dev);
if (card->iobase)
ioport_unmap(card->iobase);
@ -807,8 +807,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
p_dev->io.NumPorts1 = cfg->io.win[0].len;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
if (cfg->io.nwin != 1) {
@ -837,9 +836,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
card->p_dev = p_dev;
p_dev->priv = card;
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = NULL;
p_dev->conf.Attributes = 0;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@ -854,13 +850,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(p_dev, &p_dev->irq);
if (ret) {
lbs_pr_err("error in pcmcia_request_irq\n");
goto out1;
}
}
if (!p_dev->irq)
goto out1;
/* Initialize io access */
card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
@ -883,7 +874,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
/* Finally, report what we've done */
lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
p_dev->irq, p_dev->io.BasePort1,
p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
/*
@ -940,7 +931,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
priv->fw_ready = 1;
/* Now actually get the IRQ */
ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
ret = request_irq(p_dev->irq, if_cs_interrupt,
IRQF_SHARED, DRV_NAME, card);
if (ret) {
lbs_pr_err("error in request_irq\n");

View File

@ -119,10 +119,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
card->p_dev = link;
link->priv = priv;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = orinoco_interrupt;
/* General socket configuration defaults can go here. In this
* client, we assume very little, and rely on the CIS for
* almost everything. In most clients, many details (i.e.,
@ -258,12 +254,7 @@ orinoco_cs_config(struct pcmcia_device *link)
goto failed;
}
/*
* Allocate an interrupt line. Note that this does not assign
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, orinoco_interrupt);
if (ret)
goto failed;
@ -296,7 +287,7 @@ orinoco_cs_config(struct pcmcia_device *link)
/* Register an interface with the stack */
if (orinoco_if_add(priv, link->io.BasePort1,
link->irq.AssignedIRQ) != 0) {
link->irq) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
}

View File

@ -193,10 +193,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
card->p_dev = link;
link->priv = priv;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = orinoco_interrupt;
/* General socket configuration defaults can go here. In this
* client, we assume very little, and rely on the CIS for
* almost everything. In most clients, many details (i.e.,
@ -332,12 +328,7 @@ spectrum_cs_config(struct pcmcia_device *link)
goto failed;
}
/*
* Allocate an interrupt line. Note that this does not assign
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, orinoco_interrupt);
if (ret)
goto failed;
@ -374,7 +365,7 @@ spectrum_cs_config(struct pcmcia_device *link)
/* Register an interface with the stack */
if (orinoco_if_add(priv, link->io.BasePort1,
link->irq.AssignedIRQ) != 0) {
link->irq) != 0) {
printk(KERN_ERR PFX "orinoco_if_add() failed\n");
goto failed;
}

View File

@ -321,10 +321,6 @@ static int ray_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = 5;
/* Interrupt setup. For PCMCIA, driver takes what's given */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = &ray_interrupt;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@ -417,10 +413,10 @@ static int ray_config(struct pcmcia_device *link)
/* Now allocate an interrupt line. Note that this does not
actually assign a handler to the interrupt.
*/
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, ray_interrupt);
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
/* This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping.

View File

@ -1897,10 +1897,6 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = 5;
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = wl3501_interrupt;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@ -1961,7 +1957,7 @@ static int wl3501_config(struct pcmcia_device *link)
/* Now allocate an interrupt line. Note that this does not actually
* assign a handler to the interrupt. */
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, wl3501_interrupt);
if (ret)
goto failed;
@ -1972,7 +1968,7 @@ static int wl3501_config(struct pcmcia_device *link)
if (ret)
goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev)) {

View File

@ -105,7 +105,6 @@ static int parport_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -174,20 +173,19 @@ static int parport_config(struct pcmcia_device *link)
if (ret)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
goto failed;
p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2,
link->irq.AssignedIRQ, PARPORT_DMA_NONE,
link->irq, PARPORT_DMA_NONE,
&link->dev, IRQF_SHARED);
if (p == NULL) {
printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
"0x%3x, irq %u failed\n", link->io.BasePort1,
link->irq.AssignedIRQ);
link->irq);
goto failed;
}

View File

@ -546,7 +546,6 @@ struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int fu
p_dev->function_config = tmp_dev->function_config;
p_dev->io = tmp_dev->io;
p_dev->irq = tmp_dev->irq;
p_dev->irq_v = tmp_dev->irq_v;
kref_get(&p_dev->function_config->ref);
}
@ -571,7 +570,7 @@ struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int fu
dev_printk(KERN_NOTICE, &p_dev->dev,
"pcmcia: registering new device %s (IRQ: %d)\n",
p_dev->devname, p_dev->irq_v);
p_dev->devname, p_dev->irq);
pcmcia_device_query(p_dev);

View File

@ -408,41 +408,6 @@ out:
} /* pcmcia_release_io */
static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req)
{
struct pcmcia_socket *s = p_dev->socket;
config_t *c;
int ret = -EINVAL;
mutex_lock(&s->ops_mutex);
c = p_dev->function_config;
if (!p_dev->_irq)
goto out;
p_dev->_irq = 0;
if (c->state & CONFIG_LOCKED)
goto out;
if (s->pcmcia_irq != req->AssignedIRQ) {
dev_dbg(&s->dev, "IRQ must match assigned one\n");
goto out;
}
if (req->Handler)
free_irq(req->AssignedIRQ, p_dev->priv);
ret = 0;
out:
mutex_unlock(&s->ops_mutex);
return ret;
} /* pcmcia_release_irq */
int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh)
{
struct pcmcia_socket *s = p_dev->socket;
@ -681,61 +646,66 @@ out:
EXPORT_SYMBOL(pcmcia_request_io);
/** pcmcia_request_irq
/**
* pcmcia_request_irq() - attempt to request a IRQ for a PCMCIA device
*
* Request_irq() reserves an irq for this client.
* pcmcia_request_irq() is a wrapper around request_irq which will allow
* the PCMCIA core to clean up the registration in pcmcia_disable_device().
* Drivers are free to use request_irq() directly, but then they need to
* call free_irq themselfves, too. Also, only IRQF_SHARED capable IRQ
* handlers are allowed.
*/
int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev,
irq_handler_t handler)
{
struct pcmcia_socket *s = p_dev->socket;
config_t *c;
int ret = -EINVAL, irq = p_dev->irq_v;
int type = IRQF_SHARED;
int ret;
mutex_lock(&s->ops_mutex);
if (!p_dev->irq)
return -EINVAL;
if (!(s->state & SOCKET_PRESENT)) {
dev_dbg(&s->dev, "No card present\n");
goto out;
}
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED) {
dev_dbg(&s->dev, "Configuration is locked\n");
goto out;
}
ret = request_irq(p_dev->irq, handler, IRQF_SHARED,
p_dev->devname, p_dev->priv);
if (!ret)
p_dev->_irq = 1;
if (!irq) {
dev_dbg(&s->dev, "no IRQ available\n");
goto out;
}
return ret;
}
EXPORT_SYMBOL(pcmcia_request_irq);
if (!(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) {
req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING;
/**
* pcmcia_request_exclusive_irq() - attempt to request an exclusive IRQ first
*
* pcmcia_request_exclusive_irq() is a wrapper around request_irq which
* attempts first to request an exclusive IRQ. If it fails, it also accepts
* a shared IRQ, but prints out a warning. PCMCIA drivers should allow for
* IRQ sharing and either use request_irq directly (then they need to call
* free_irq themselves, too), or the pcmcia_request_irq() function.
*/
int __must_check
pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, irq_handler_t handler)
{
int ret;
if (!p_dev->irq)
return -EINVAL;
ret = request_irq(p_dev->irq, handler, 0, p_dev->devname, p_dev->priv);
if (ret) {
ret = pcmcia_request_irq(p_dev, handler);
dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
"request for exclusive IRQ could not be fulfilled.\n");
dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
"needs updating to supported shared IRQ lines.\n");
}
if (ret)
dev_printk(KERN_INFO, &p_dev->dev, "request_irq() failed\n");
else
p_dev->_irq = 1;
if (req->Handler) {
ret = request_irq(irq, req->Handler, type,
p_dev->devname, p_dev->priv);
if (ret) {
dev_printk(KERN_INFO, &s->dev,
"request_irq() failed\n");
goto out;
}
}
req->AssignedIRQ = irq;
p_dev->_irq = 1;
ret = 0;
out:
mutex_unlock(&s->ops_mutex);
return ret;
} /* pcmcia_request_irq */
EXPORT_SYMBOL(pcmcia_request_irq);
} /* pcmcia_request_exclusive_irq */
EXPORT_SYMBOL(pcmcia_request_exclusive_irq);
#ifdef CONFIG_PCMCIA_PROBE
@ -779,7 +749,7 @@ static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type)
p_dev);
if (!ret) {
free_irq(irq, p_dev);
p_dev->irq_v = s->pcmcia_irq = irq;
p_dev->irq = s->pcmcia_irq = irq;
pcmcia_used_irq[irq]++;
break;
}
@ -820,12 +790,12 @@ int pcmcia_setup_irq(struct pcmcia_device *p_dev)
{
struct pcmcia_socket *s = p_dev->socket;
if (p_dev->irq_v)
if (p_dev->irq)
return 0;
/* already assigned? */
if (s->pcmcia_irq) {
p_dev->irq_v = s->pcmcia_irq;
p_dev->irq = s->pcmcia_irq;
return 0;
}
@ -839,7 +809,7 @@ int pcmcia_setup_irq(struct pcmcia_device *p_dev)
/* but use the PCI irq otherwise */
if (s->pci_irq) {
p_dev->irq_v = s->pcmcia_irq = s->pci_irq;
p_dev->irq = s->pcmcia_irq = s->pci_irq;
return 0;
}
@ -947,7 +917,8 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev)
{
pcmcia_release_configuration(p_dev);
pcmcia_release_io(p_dev, &p_dev->io);
pcmcia_release_irq(p_dev, &p_dev->irq);
if (p_dev->_irq)
free_irq(p_dev->irq, p_dev->priv);
if (p_dev->win)
pcmcia_release_window(p_dev, p_dev->win);
}

View File

@ -105,7 +105,6 @@ static int aha152x_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 0x20;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@ -160,8 +159,7 @@ static int aha152x_config_cs(struct pcmcia_device *link)
if (ret)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@ -172,7 +170,7 @@ static int aha152x_config_cs(struct pcmcia_device *link)
memset(&s, 0, sizeof(s));
s.conf = "PCMCIA setup";
s.io_port = link->io.BasePort1;
s.irq = link->irq.AssignedIRQ;
s.irq = link->irq;
s.scsiid = host_id;
s.reconnect = reconnect;
s.parity = parity;

View File

@ -88,7 +88,6 @@ static int fdomain_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 0x10;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@ -133,8 +132,7 @@ static int fdomain_config(struct pcmcia_device *link)
if (ret)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
@ -144,7 +142,7 @@ static int fdomain_config(struct pcmcia_device *link)
release_region(link->io.BasePort1, link->io.NumPorts1);
/* Set configuration options for the fdomain driver */
sprintf(str, "%d,%d", link->io.BasePort1, link->irq.AssignedIRQ);
sprintf(str, "%d,%d", link->io.BasePort1, link->irq);
fdomain_setup(str);
host = __fdomain_16x0_detect(&fdomain_driver_template);

View File

@ -1563,13 +1563,6 @@ static int nsp_cs_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10; /* not used */
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
/* Interrupt handler */
link->irq.Handler = &nspintr;
link->irq.Attributes |= IRQF_SHARED;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -1646,8 +1639,7 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -1720,10 +1712,8 @@ static int nsp_cs_config(struct pcmcia_device *link)
if (ret)
goto cs_failed;
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
if (pcmcia_request_irq(link, &link->irq))
goto cs_failed;
}
if (pcmcia_request_irq(link, nspintr))
goto cs_failed;
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
@ -1741,7 +1731,7 @@ static int nsp_cs_config(struct pcmcia_device *link)
/* Set port and IRQ */
data->BaseAddress = link->io.BasePort1;
data->NumAddress = link->io.NumPorts1;
data->IrqNumber = link->irq.AssignedIRQ;
data->IrqNumber = link->irq;
nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d",
data->BaseAddress, data->NumAddress, data->IrqNumber);
@ -1775,7 +1765,7 @@ static int nsp_cs_config(struct pcmcia_device *link)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
}
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
}
if (link->io.NumPorts1) {
printk(", io 0x%04x-0x%04x", link->io.BasePort1,

View File

@ -161,7 +161,6 @@ static int qlogic_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
@ -209,8 +208,7 @@ static int qlogic_config(struct pcmcia_device * link)
if (ret)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@ -227,10 +225,10 @@ static int qlogic_config(struct pcmcia_device * link)
/* The KXL-810AN has a bigger IO port window */
if (link->io.NumPorts1 == 32)
host = qlogic_detect(&qlogicfas_driver_template, link,
link->io.BasePort1 + 16, link->irq.AssignedIRQ);
link->io.BasePort1 + 16, link->irq);
else
host = qlogic_detect(&qlogicfas_driver_template, link,
link->io.BasePort1, link->irq.AssignedIRQ);
link->io.BasePort1, link->irq);
if (!host) {
printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
@ -258,7 +256,7 @@ static void qlogic_release(struct pcmcia_device *link)
scsi_remove_host(info->host);
free_irq(link->irq.AssignedIRQ, info->host);
free_irq(link->irq, info->host);
pcmcia_disable_device(link);
scsi_host_put(info->host);

View File

@ -719,8 +719,7 @@ SYM53C500_config(struct pcmcia_device *link)
if (ret)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@ -752,7 +751,7 @@ SYM53C500_config(struct pcmcia_device *link)
* 0x320, 0x330, 0x340, 0x350
*/
port_base = link->io.BasePort1;
irq_level = link->irq.AssignedIRQ;
irq_level = link->irq;
DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n",
port_base, irq_level, USE_FAST_PIO);)
@ -866,7 +865,6 @@ SYM53C500_probe(struct pcmcia_device *link)
link->io.NumPorts1 = 16;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 10;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;

View File

@ -343,7 +343,6 @@ static int serial_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
@ -486,7 +485,7 @@ static int simple_config(struct pcmcia_device *link)
}
if (info->slave) {
return setup_serial(link, info, port,
link->irq.AssignedIRQ);
link->irq);
}
}
@ -507,10 +506,6 @@ static int simple_config(struct pcmcia_device *link)
return -1;
found_port:
i = pcmcia_request_irq(link, &link->irq);
if (i != 0)
link->irq.AssignedIRQ = 0;
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
@ -523,7 +518,7 @@ found_port:
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
return -1;
return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
return setup_serial(link, info, link->io.BasePort1, link->irq);
}
static int multi_config_check(struct pcmcia_device *p_dev,
@ -586,13 +581,9 @@ static int multi_config(struct pcmcia_device *link)
}
}
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
/* FIXME: comment does not fit, error handling does not fit */
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
link->irq.AssignedIRQ = 0;
}
if (!link->irq)
dev_warn(&link->dev,
"serial_cs: no usable IRQ found, continuing...\n");
/*
* Apply any configuration quirks.
@ -615,11 +606,11 @@ static int multi_config(struct pcmcia_device *link)
if (link->conf.ConfigIndex == 1 ||
link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
link->irq.AssignedIRQ);
link->irq);
base2 = link->io.BasePort1;
} else {
err = setup_serial(link, info, link->io.BasePort1,
link->irq.AssignedIRQ);
link->irq);
}
info->c950ctrl = base2;
@ -633,10 +624,10 @@ static int multi_config(struct pcmcia_device *link)
return 0;
}
setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
setup_serial(link, info, link->io.BasePort1, link->irq);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq.AssignedIRQ);
link->irq);
return 0;
}

View File

@ -490,7 +490,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
break;
case SSB_BUSTYPE_PCMCIA:
#ifdef CONFIG_SSB_PCMCIAHOST
sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
sdev->irq = bus->host_pcmcia->irq;
dev->parent = &bus->host_pcmcia->dev;
#endif
break;

View File

@ -180,12 +180,12 @@ static int das16cs_attach(struct comedi_device *dev,
}
printk("\n");
ret = request_irq(link->irq.AssignedIRQ, das16cs_interrupt,
ret = request_irq(link->irq, das16cs_interrupt,
IRQF_SHARED, "cb_das16_cs", dev);
if (ret < 0) {
return ret;
}
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
printk("irq=%u ", dev->irq);
dev->board_ptr = das16cs_probe(dev, link);
@ -702,10 +702,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
link->priv = local;
/* Initialize the pcmcia_device structure */
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = NULL;
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -740,8 +736,7 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -EINVAL;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -780,16 +775,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
goto failed;
}
/*
Allocate an interrupt line. Note that this does not assign a
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
if (!link->irq)
goto failed;
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
@ -811,7 +799,7 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %u", link->irq.AssignedIRQ);
printk(", irq %u", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);

View File

@ -172,10 +172,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -229,8 +225,7 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -277,11 +272,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
goto failed;
}
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
if (!link->irq)
goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@ -304,7 +296,7 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %u", link->irq.AssignedIRQ);
printk(", irq %u", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);

View File

@ -380,7 +380,7 @@ static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return -EIO;
iobase = link->io.BasePort1;
#ifdef incomplete
irq = link->irq.AssignedIRQ;
irq = link->irq;
#endif
break;
default:
@ -502,10 +502,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -577,8 +573,7 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -639,16 +634,8 @@ static void dio700_config(struct pcmcia_device *link)
goto failed;
}
/*
Allocate an interrupt line. Note that this does not assign a
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
if (!link->irq)
goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@ -671,7 +658,7 @@ static void dio700_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);

View File

@ -131,7 +131,7 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return -EIO;
iobase = link->io.BasePort1;
#ifdef incomplete
irq = link->irq.AssignedIRQ;
irq = link->irq;
#endif
break;
default:
@ -253,10 +253,6 @@ static int dio24_cs_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -328,8 +324,7 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -390,16 +385,8 @@ static void dio24_config(struct pcmcia_device *link)
goto failed;
}
/*
Allocate an interrupt line. Note that this does not assign a
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
if (!link->irq)
goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@ -422,7 +409,7 @@ static void dio24_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);

View File

@ -144,7 +144,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (!link)
return -EIO;
iobase = link->io.BasePort1;
irq = link->irq.AssignedIRQ;
irq = link->irq;
break;
default:
printk("bug! couldn't determine board type\n");
@ -229,10 +229,6 @@ static int labpc_cs_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = NULL;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -306,9 +302,7 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
}
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |=
(CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ);
p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -368,16 +362,8 @@ static void labpc_config(struct pcmcia_device *link)
goto failed;
}
/*
Allocate an interrupt line. Note that this does not assign a
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
if (!link->irq)
goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@ -400,7 +386,7 @@ static void labpc_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);

View File

@ -272,7 +272,6 @@ static int cs_attach(struct pcmcia_device *link)
{
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
link->io.NumPorts1 = 16;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -344,10 +343,8 @@ static void mio_cs_config(struct pcmcia_device *link)
return;
}
ret = pcmcia_request_irq(link, &link->irq);
if (ret) {
printk("pcmcia_request_irq() returned error: %i\n", ret);
}
if (!link->irq)
dev_info(&link->dev, "no IRQ available\n");
ret = pcmcia_request_configuration(link, &link->conf);
@ -369,7 +366,7 @@ static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev->driver = &driver_ni_mio_cs;
dev->iobase = link->io.BasePort1;
irq = link->irq.AssignedIRQ;
irq = link->irq;
printk("comedi%d: %s: DAQCard: io 0x%04lx, irq %u, ",
dev->minor, dev->driver->driver_name, dev->iobase, irq);

View File

@ -1040,10 +1040,6 @@ static int daqp_cs_attach(struct pcmcia_device *link)
local->link = link;
link->priv = local;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = daqp_interrupt;
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@ -1105,8 +1101,7 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -1144,16 +1139,9 @@ static void daqp_cs_config(struct pcmcia_device *link)
goto failed;
}
/*
Allocate an interrupt line. Note that this does not assign a
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
}
ret = pcmcia_request_irq(link, daqp_interrupt);
if (ret)
goto failed;
/*
This actually configures the PCMCIA socket -- setting up
@ -1180,7 +1168,7 @@ static void daqp_cs_config(struct pcmcia_device *link)
printk(KERN_INFO "%s: index 0x%02x",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %u", link->irq.AssignedIRQ);
printk(", irq %u", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);

View File

@ -382,10 +382,6 @@ static int netwave_probe(struct pcmcia_device *link)
link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */
link->io.IOAddrLines = 5;
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.Handler = &netwave_interrupt;
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
@ -732,7 +728,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_irq(link, netwave_interrupt);
if (ret)
goto failed;
@ -767,7 +763,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
ramBase = ioremap(req.Base, 0x8000);
priv->ramBase = ramBase;
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
SET_NETDEV_DEV(dev, &link->dev);

View File

@ -3850,12 +3850,8 @@ wv_pcmcia_config(struct pcmcia_device * link)
if (i != 0)
break;
/*
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != 0)
i = pcmcia_request_interrupt(link, wavelan_interrupt);
if (!i)
break;
/*
@ -3890,7 +3886,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
break;
/* Feed device with this info... */
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
netif_start_queue(dev);
@ -4437,10 +4433,6 @@ wavelan_probe(struct pcmcia_device *p_dev)
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = 3;
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
p_dev->irq.Handler = wavelan_interrupt;
/* General socket configuration */
p_dev->conf.Attributes = CONF_ENABLE_IRQ;
p_dev->conf.IntType = INT_MEMORY_AND_IO;
@ -4487,7 +4479,6 @@ wavelan_probe(struct pcmcia_device *p_dev)
ret = wv_hw_config(dev);
if (ret) {
dev->irq = 0;
pcmcia_disable_device(p_dev);
return ret;
}

View File

@ -156,15 +156,12 @@ static int wl_adapter_attach(struct pcmcia_device *link)
link->io.NumPorts1 = HCF_NUM_IO_PORTS;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
link->io.IOAddrLines = 6;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
link->irq.Handler = &wl_isr;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 5;
link->conf.Present = PRESENT_OPTION;
link->priv = link->irq.Instance = dev;
link->priv = dev;
lp = wl_priv(dev);
lp->link = link;
@ -318,11 +315,11 @@ void wl_adapter_insert( struct pcmcia_device *link )
link->conf.Attributes |= CONF_ENABLE_IRQ;
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, wl_isr));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
dev->irq = link->irq.AssignedIRQ;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
SET_NETDEV_DEV(dev, &handle_to_dev(link));

View File

@ -163,8 +163,7 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
/* we need an interrupt */
if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@ -197,11 +196,8 @@ static int sl811_cs_config(struct pcmcia_device *link)
/* require an IRQ and two registers */
if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
goto failed;
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
ret = pcmcia_request_irq(link, &link->irq);
if (ret)
goto failed;
} else
if (!link->irq)
goto failed;
ret = pcmcia_request_configuration(link, &link->conf);
@ -216,12 +212,12 @@ static int sl811_cs_config(struct pcmcia_device *link)
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
printk(", irq %d", link->irq.AssignedIRQ);
printk(", irq %d", link->irq);
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
printk("\n");
if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
if (sl811_hc_init(parent, link->io.BasePort1, link->irq)
< 0) {
failed:
printk(KERN_WARNING "sl811_cs_config failed\n");
@ -241,10 +237,6 @@ static int sl811_cs_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
/* Initialize */
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.Handler = NULL;
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;

View File

@ -114,13 +114,6 @@ typedef struct io_req_t {
#define IO_DATA_PATH_WIDTH_16 0x08
#define IO_DATA_PATH_WIDTH_AUTO 0x10
/* For RequestIRQ and ReleaseIRQ */
typedef struct irq_req_t {
u_int Attributes;
u_int AssignedIRQ;
irq_handler_t Handler;
} irq_req_t;
/* Attributes for RequestIRQ and ReleaseIRQ */
#define IRQ_TYPE 0x03
#define IRQ_TYPE_EXCLUSIVE 0x00

View File

@ -91,12 +91,11 @@ struct pcmcia_device {
dev_node_t *dev_node;
u_int open;
io_req_t io;
irq_req_t irq;
config_req_t conf;
window_handle_t win;
/* device setup */
unsigned int irq_v; /* do not use directly yet */
unsigned int irq;
/* Is the device suspended? */
u16 suspended:1;
@ -194,7 +193,13 @@ int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
/* device configuration */
int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req);
int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req);
int __must_check __deprecated
pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
irq_handler_t handler);
int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev,
irq_handler_t handler);
int pcmcia_request_configuration(struct pcmcia_device *p_dev,
config_req_t *req);

View File

@ -142,11 +142,6 @@ static int snd_pdacf_probe(struct pcmcia_device *link)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.NumPorts1 = 16;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
/* FIXME: This driver should be updated to allow for dynamic IRQ sharing */
/* link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; */
link->irq.Handler = pdacf_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@ -228,7 +223,7 @@ static int pdacf_config(struct pcmcia_device *link)
if (ret)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_exclusive_irq(link, pdacf_interrupt);
if (ret)
goto failed;
@ -236,7 +231,7 @@ static int pdacf_config(struct pcmcia_device *link)
if (ret)
goto failed;
if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq) < 0)
goto failed;
link->dev_node = &pdacf->node;

View File

@ -162,10 +162,6 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl,
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.NumPorts1 = 16;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.Handler = &snd_vx_irq_handler;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
@ -235,7 +231,7 @@ static int vxpocket_config(struct pcmcia_device *link)
if (ret)
goto failed;
ret = pcmcia_request_irq(link, &link->irq);
ret = pcmcia_request_exclusive_irq(link, snd_vx_irq_handler);
if (ret)
goto failed;
@ -246,7 +242,7 @@ static int vxpocket_config(struct pcmcia_device *link)
chip->dev = &link->dev;
snd_card_set_dev(chip->card, chip->dev);
if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq) < 0)
goto failed;
link->dev_node = &vxp->node;