[MTD] NAND: Alchemy board driver cleanup
- cleaned up the partitions and include files - added more flexible CS and address detection and setup Regression tested on db1200 and db1550. Signed-off-by: Pete Popov <ppopov@pacbell.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This commit is contained in:
parent
733802d974
commit
ef6f0d1ffc
|
@ -1,5 +1,5 @@
|
||||||
# drivers/mtd/nand/Kconfig
|
# drivers/mtd/nand/Kconfig
|
||||||
# $Id: Kconfig,v 1.31 2005/06/20 12:03:21 bjd Exp $
|
# $Id: Kconfig,v 1.34 2005/09/23 01:44:55 ppopov Exp $
|
||||||
|
|
||||||
menu "NAND Flash Device Drivers"
|
menu "NAND Flash Device Drivers"
|
||||||
depends on MTD!=n
|
depends on MTD!=n
|
||||||
|
@ -59,8 +59,8 @@ config MTD_NAND_IDS
|
||||||
tristate
|
tristate
|
||||||
|
|
||||||
config MTD_NAND_AU1550
|
config MTD_NAND_AU1550
|
||||||
tristate "Au1550 NAND support"
|
tristate "Au1550/1200 NAND support"
|
||||||
depends on SOC_AU1550 && MTD_NAND
|
depends on (SOC_AU1200 || SOC_AU1550) && MTD_NAND
|
||||||
help
|
help
|
||||||
This enables the driver for the NAND flash controller on the
|
This enables the driver for the NAND flash controller on the
|
||||||
AMD/Alchemy 1550 SOC.
|
AMD/Alchemy 1550 SOC.
|
||||||
|
|
|
@ -3,7 +3,7 @@
|
||||||
*
|
*
|
||||||
* Copyright (C) 2004 Embedded Edge, LLC
|
* Copyright (C) 2004 Embedded Edge, LLC
|
||||||
*
|
*
|
||||||
* $Id: au1550nd.c,v 1.11 2004/11/04 12:53:10 gleixner Exp $
|
* $Id: au1550nd.c,v 1.12 2005/09/23 01:44:55 ppopov Exp $
|
||||||
*
|
*
|
||||||
* This program is free software; you can redistribute it and/or modify
|
* This program is free software; you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU General Public License version 2 as
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
@ -21,13 +21,7 @@
|
||||||
|
|
||||||
/* fixme: this is ugly */
|
/* fixme: this is ugly */
|
||||||
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0)
|
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0)
|
||||||
#include <asm/mach-au1x00/au1000.h>
|
#include <asm/mach-au1x00/au1xxx.h>
|
||||||
#ifdef CONFIG_MIPS_PB1550
|
|
||||||
#include <asm/mach-pb1x00/pb1550.h>
|
|
||||||
#endif
|
|
||||||
#ifdef CONFIG_MIPS_DB1550
|
|
||||||
#include <asm/mach-db1x00/db1x00.h>
|
|
||||||
#endif
|
|
||||||
#else
|
#else
|
||||||
#include <asm/au1000.h>
|
#include <asm/au1000.h>
|
||||||
#ifdef CONFIG_MIPS_PB1550
|
#ifdef CONFIG_MIPS_PB1550
|
||||||
|
@ -45,39 +39,22 @@ static struct mtd_info *au1550_mtd = NULL;
|
||||||
static void __iomem *p_nand;
|
static void __iomem *p_nand;
|
||||||
static int nand_width = 1; /* default x8*/
|
static int nand_width = 1; /* default x8*/
|
||||||
|
|
||||||
#define NAND_CS 1
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Define partitions for flash device
|
* Define partitions for flash device
|
||||||
*/
|
*/
|
||||||
const static struct mtd_partition partition_info[] = {
|
const static struct mtd_partition partition_info[] = {
|
||||||
#ifdef CONFIG_MIPS_PB1550
|
|
||||||
#define NUM_PARTITIONS 2
|
|
||||||
{
|
{
|
||||||
.name = "Pb1550 NAND FS 0",
|
.name = "NAND FS 0",
|
||||||
.offset = 0,
|
.offset = 0,
|
||||||
.size = 8*1024*1024
|
.size = 8*1024*1024
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
.name = "Pb1550 NAND FS 1",
|
.name = "NAND FS 1",
|
||||||
.offset = MTDPART_OFS_APPEND,
|
.offset = MTDPART_OFS_APPEND,
|
||||||
.size = MTDPART_SIZ_FULL
|
.size = MTDPART_SIZ_FULL
|
||||||
}
|
}
|
||||||
#endif
|
|
||||||
#ifdef CONFIG_MIPS_DB1550
|
|
||||||
#define NUM_PARTITIONS 2
|
|
||||||
{
|
|
||||||
.name = "Db1550 NAND FS 0",
|
|
||||||
.offset = 0,
|
|
||||||
.size = 8*1024*1024
|
|
||||||
},
|
|
||||||
{
|
|
||||||
.name = "Db1550 NAND FS 1",
|
|
||||||
.offset = MTDPART_OFS_APPEND,
|
|
||||||
.size = MTDPART_SIZ_FULL
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
};
|
};
|
||||||
|
#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
|
||||||
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
|
@ -339,11 +316,13 @@ int au1550_device_ready(struct mtd_info *mtd)
|
||||||
/*
|
/*
|
||||||
* Main initialization routine
|
* Main initialization routine
|
||||||
*/
|
*/
|
||||||
int __init au1550_init (void)
|
int __init au1xxx_nand_init (void)
|
||||||
{
|
{
|
||||||
struct nand_chip *this;
|
struct nand_chip *this;
|
||||||
u16 boot_swapboot = 0; /* default value */
|
u16 boot_swapboot = 0; /* default value */
|
||||||
int retval;
|
int retval;
|
||||||
|
u32 mem_staddr;
|
||||||
|
u32 nand_phys;
|
||||||
|
|
||||||
/* Allocate memory for MTD device structure and private data */
|
/* Allocate memory for MTD device structure and private data */
|
||||||
au1550_mtd = kmalloc (sizeof(struct mtd_info) +
|
au1550_mtd = kmalloc (sizeof(struct mtd_info) +
|
||||||
|
@ -364,8 +343,11 @@ int __init au1550_init (void)
|
||||||
au1550_mtd->priv = this;
|
au1550_mtd->priv = this;
|
||||||
|
|
||||||
|
|
||||||
/* MEM_STNDCTL: disable ints, disable nand boot */
|
/* disable interrupts */
|
||||||
au_writel(0, MEM_STNDCTL);
|
au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL);
|
||||||
|
|
||||||
|
/* disable NAND boot */
|
||||||
|
au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL);
|
||||||
|
|
||||||
#ifdef CONFIG_MIPS_PB1550
|
#ifdef CONFIG_MIPS_PB1550
|
||||||
/* set gpio206 high */
|
/* set gpio206 high */
|
||||||
|
@ -397,19 +379,60 @@ int __init au1550_init (void)
|
||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/* Configure RCE1 - should be done by YAMON */
|
/* Configure chip-select; normally done by boot code, e.g. YAMON */
|
||||||
au_writel(0x5 | (nand_width << 22), 0xB4001010); /* MEM_STCFG1 */
|
#ifdef NAND_STCFG
|
||||||
au_writel(NAND_TIMING, 0xB4001014); /* MEM_STTIME1 */
|
if (NAND_CS == 0) {
|
||||||
au_sync();
|
au_writel(NAND_STCFG, MEM_STCFG0);
|
||||||
|
au_writel(NAND_STTIME, MEM_STTIME0);
|
||||||
|
au_writel(NAND_STADDR, MEM_STADDR0);
|
||||||
|
}
|
||||||
|
if (NAND_CS == 1) {
|
||||||
|
au_writel(NAND_STCFG, MEM_STCFG1);
|
||||||
|
au_writel(NAND_STTIME, MEM_STTIME1);
|
||||||
|
au_writel(NAND_STADDR, MEM_STADDR1);
|
||||||
|
}
|
||||||
|
if (NAND_CS == 2) {
|
||||||
|
au_writel(NAND_STCFG, MEM_STCFG2);
|
||||||
|
au_writel(NAND_STTIME, MEM_STTIME2);
|
||||||
|
au_writel(NAND_STADDR, MEM_STADDR2);
|
||||||
|
}
|
||||||
|
if (NAND_CS == 3) {
|
||||||
|
au_writel(NAND_STCFG, MEM_STCFG3);
|
||||||
|
au_writel(NAND_STTIME, MEM_STTIME3);
|
||||||
|
au_writel(NAND_STADDR, MEM_STADDR3);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
/* setup and enable chip select, MEM_STADDR1 */
|
/* Locate NAND chip-select in order to determine NAND phys address */
|
||||||
/* we really need to decode offsets only up till 0x20 */
|
mem_staddr = 0x00000000;
|
||||||
au_writel((1<<28) | (NAND_PHYS_ADDR>>4) |
|
if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0))
|
||||||
(((NAND_PHYS_ADDR + 0x1000)-1) & (0x3fff<<18)>>18),
|
mem_staddr = au_readl(MEM_STADDR0);
|
||||||
MEM_STADDR1);
|
else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1))
|
||||||
au_sync();
|
mem_staddr = au_readl(MEM_STADDR1);
|
||||||
|
else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2))
|
||||||
|
mem_staddr = au_readl(MEM_STADDR2);
|
||||||
|
else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3))
|
||||||
|
mem_staddr = au_readl(MEM_STADDR3);
|
||||||
|
|
||||||
|
if (mem_staddr == 0x00000000) {
|
||||||
|
printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n");
|
||||||
|
kfree(au1550_mtd);
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
nand_phys = (mem_staddr << 4) & 0xFFFC0000;
|
||||||
|
|
||||||
|
p_nand = (void __iomem *)ioremap(nand_phys, 0x1000);
|
||||||
|
|
||||||
|
/* make controller and MTD agree */
|
||||||
|
if (NAND_CS == 0)
|
||||||
|
nand_width = au_readl(MEM_STCFG0) & (1<<22);
|
||||||
|
if (NAND_CS == 1)
|
||||||
|
nand_width = au_readl(MEM_STCFG1) & (1<<22);
|
||||||
|
if (NAND_CS == 2)
|
||||||
|
nand_width = au_readl(MEM_STCFG2) & (1<<22);
|
||||||
|
if (NAND_CS == 3)
|
||||||
|
nand_width = au_readl(MEM_STCFG3) & (1<<22);
|
||||||
|
|
||||||
p_nand = ioremap(NAND_PHYS_ADDR, 0x1000);
|
|
||||||
|
|
||||||
/* Set address of hardware control function */
|
/* Set address of hardware control function */
|
||||||
this->hwcontrol = au1550_hwcontrol;
|
this->hwcontrol = au1550_hwcontrol;
|
||||||
|
@ -438,7 +461,7 @@ int __init au1550_init (void)
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Register the partitions */
|
/* Register the partitions */
|
||||||
add_mtd_partitions(au1550_mtd, partition_info, NUM_PARTITIONS);
|
add_mtd_partitions(au1550_mtd, partition_info, NB_OF(partition_info));
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
|
|
||||||
|
@ -450,7 +473,7 @@ int __init au1550_init (void)
|
||||||
return retval;
|
return retval;
|
||||||
}
|
}
|
||||||
|
|
||||||
module_init(au1550_init);
|
module_init(au1xxx_nand_init);
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Clean up routine
|
* Clean up routine
|
||||||
|
|
Loading…
Reference in a new issue