redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

V4L/DVB (13913): saa7127: Add support for generating SECAM output for the SAA712[89] chips

Browse source 
This change fixes up saa7127_s_std() generate SECAM out, if the user has
requested a 50 Hz video standard set that only contains a request for SECAM
standards and not PAL.  Only the SAA712[89] chips can generate SECAM, the
SAA712[67] chips cannot.

I was unclear on the burst start and end values - I couldn't figure out
the units - so I left them the same as for the PAL systems.

A the video decoders on both a PVR-350 (SAA7115) and an HVR-1600 (CX23418)
identify the SECAM signal generated by a SAA7129 with this patch as SECAM.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Andy Walls 2010-01-03 23:28:18 -03:00 committed by Mauro Carvalho Chehab
parent a8073119d6
commit f05b7f5ee1
1 changed files with 40 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

47
drivers/media/video/saa7127.c
View file

@ -181,7 +181,7 @@ static const struct i2c_reg_value saa7127_init_config_common[] = {
#define SAA7127_60HZ_DAC_CONTROL 0x15
static const struct i2c_reg_value saa7127_init_config_60hz[] = {
{ SAA7127_REG_BURST_START, 0x19 },
/* BURST_END is also used as a chip ID in saa7127_detect_client */
/* BURST_END is also used as a chip ID in saa7127_probe */
{ SAA7127_REG_BURST_END, 0x1d },
{ SAA7127_REG_CHROMA_PHASE, 0xa3 },
{ SAA7127_REG_GAINU, 0x98 },
@ -200,10 +200,10 @@ static const struct i2c_reg_value saa7127_init_config_60hz[] = {
{ 0, 0 }
};
#define SAA7127_50HZ_DAC_CONTROL 0x02
static struct i2c_reg_value saa7127_init_config_50hz[] = {
#define SAA7127_50HZ_PAL_DAC_CONTROL 0x02
static struct i2c_reg_value saa7127_init_config_50hz_pal[] = {
{ SAA7127_REG_BURST_START, 0x21 },
/* BURST_END is also used as a chip ID in saa7127_detect_client */
/* BURST_END is also used as a chip ID in saa7127_probe */
{ SAA7127_REG_BURST_END, 0x1d },
{ SAA7127_REG_CHROMA_PHASE, 0x3f },
{ SAA7127_REG_GAINU, 0x7d },
@ -222,6 +222,28 @@ static struct i2c_reg_value saa7127_init_config_50hz[] = {
{ 0, 0 }
};
#define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08
static struct i2c_reg_value saa7127_init_config_50hz_secam[] = {
{ SAA7127_REG_BURST_START, 0x21 },
/* BURST_END is also used as a chip ID in saa7127_probe */
{ SAA7127_REG_BURST_END, 0x1d },
{ SAA7127_REG_CHROMA_PHASE, 0x3f },
{ SAA7127_REG_GAINU, 0x6a },
{ SAA7127_REG_GAINV, 0x81 },
{ SAA7127_REG_BLACK_LEVEL, 0x33 },
{ SAA7127_REG_BLANKING_LEVEL, 0x35 },
{ SAA7127_REG_VBI_BLANKING, 0x35 },
{ SAA7127_REG_DAC_CONTROL, 0x08 },
{ SAA7127_REG_BURST_AMP, 0x2f },
{ SAA7127_REG_SUBC3, 0xb2 },
{ SAA7127_REG_SUBC2, 0x3b },
{ SAA7127_REG_SUBC1, 0xa3 },
{ SAA7127_REG_SUBC0, 0x28 },
{ SAA7127_REG_MULTI, 0x90 },
{ SAA7127_REG_CLOSED_CAPTION, 0x00 },
{ 0, 0 }
};
/*
**********************************************************************
*
@ -463,10 +485,21 @@ static int saa7127_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n");
inittab = saa7127_init_config_60hz;
state->reg_61 = SAA7127_60HZ_DAC_CONTROL;
} else if (state->ident == V4L2_IDENT_SAA7129 &&
(std & V4L2_STD_SECAM) &&
!(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) {
/* If and only if SECAM, with a SAA712[89] */
v4l2_dbg(1, debug, sd,
"Selecting 50 Hz SECAM video Standard\n");
inittab = saa7127_init_config_50hz_secam;
state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL;
} else {
v4l2_dbg(1, debug, sd, "Selecting 50 Hz video Standard\n");
inittab = saa7127_init_config_50hz;
state->reg_61 = SAA7127_50HZ_DAC_CONTROL;
v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n");
inittab = saa7127_init_config_50hz_pal;
state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL;
}
/* Write Table */