redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

thermal: qcom-spmi: Use PMIC thermal stage 2 for critical trip points 

There are three thermal stages defined in the PMIC:

stage 1: warning
stage 2: system should shut down
stage 3: emergency shut down

By default the PMIC assumes that the OS isn't doing anything and thus
at stage 2 it does a partial PMIC shutdown and at stage 3 it kills
all power. When switching between thermal stages the PMIC generates an
interrupt which is handled by the driver. The partial PMIC shutdown at
stage 2 can be disabled by software, which allows the OS to initiate a
shutdown at stage 2 with a thermal zone configured accordingly.

If a critical trip point is configured in the thermal zone the driver
adjusts the stage 1-3 temperature thresholds to (closely) match the
critical temperature with a stage 2 threshold (125/130/135/140 °C).
If a suitable match is found the partial shutdown at stage 2 is
disabled. If for some reason the system doesn't shutdown at stage 2
the emergency shutdown at stage 3 kicks in.

The partial shutdown at stage 2 remains enabled in these cases:
- no critical trip point defined
- the temperature of the critical trip point is < 125°C
- the temperature of the critical trip point is > 140°C and no
  ADC channel is configured (thus the OS is not notified when the critical
  temperature is reached)

Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
hifive-unleashed-5.1
Matthias Kaehlcke 2018-07-31 11:59:15 -07:00 committed by Eduardo Valentin
parent 97b27dd33d
commit f1599f9e4c
1 changed files with 140 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

158
drivers/thermal/qcom-spmi-temp-alarm.c
View File

@ -23,6 +23,8 @@
#include <linux/regmap.h>
#include <linux/thermal.h>
#include "thermal_core.h"
#define QPNP_TM_REG_TYPE 0x04
#define QPNP_TM_REG_SUBTYPE 0x05
#define QPNP_TM_REG_STATUS 0x08
@ -37,9 +39,11 @@
#define STATUS_GEN2_STATE_MASK GENMASK(6, 4)
#define STATUS_GEN2_STATE_SHIFT 4
#define SHUTDOWN_CTRL1_OVERRIDE_MASK GENMASK(7, 6)
#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6)
#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0)
#define SHUTDOWN_CTRL1_RATE_25HZ BIT(3)
#define ALARM_CTRL_FORCE_ENABLE BIT(7)
/*
@ -56,12 +60,19 @@
#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
#define THRESH_MIN 0
#define THRESH_MAX 3
/* Stage 2 Threshold Min: 125 C */
#define STAGE2_THRESHOLD_MIN 125000
/* Stage 2 Threshold Max: 140 C */
#define STAGE2_THRESHOLD_MAX 140000
/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
#define DEFAULT_TEMP 37000
struct qpnp_tm_chip {
struct regmap *map;
struct device *dev;
struct thermal_zone_device *tz_dev;
unsigned int subtype;
long temp;
@ -69,6 +80,10 @@ struct qpnp_tm_chip {
unsigned int stage;
unsigned int prev_stage;
unsigned int base;
/* protects .thresh, .stage and chip registers */
struct mutex lock;
bool initialized;
struct iio_channel *adc;
};
@ -125,6 +140,8 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
unsigned int stage, stage_new, stage_old;
int ret;
WARN_ON(!mutex_is_locked(&chip->lock));
ret = qpnp_tm_get_temp_stage(chip);
if (ret < 0)
return ret;
@ -163,8 +180,15 @@ static int qpnp_tm_get_temp(void *data, int *temp)
if (!temp)
return -EINVAL;
if (!chip->initialized) {
*temp = DEFAULT_TEMP;
return 0;
}
if (!chip->adc) {
mutex_lock(&chip->lock);
ret = qpnp_tm_update_temp_no_adc(chip);
mutex_unlock(&chip->lock);
if (ret < 0)
return ret;
} else {
@ -180,8 +204,72 @@ static int qpnp_tm_get_temp(void *data, int *temp)
return 0;
}
static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
int temp)
{
u8 reg;
bool disable_s2_shutdown = false;
WARN_ON(!mutex_is_locked(&chip->lock));
/*
* Default: S2 and S3 shutdown enabled, thresholds at
* 105C/125C/145C, monitoring at 25Hz
*/
reg = SHUTDOWN_CTRL1_RATE_25HZ;
if (temp == THERMAL_TEMP_INVALID ||
temp < STAGE2_THRESHOLD_MIN) {
chip->thresh = THRESH_MIN;
goto skip;
}
if (temp <= STAGE2_THRESHOLD_MAX) {
chip->thresh = THRESH_MAX -
((STAGE2_THRESHOLD_MAX - temp) /
TEMP_THRESH_STEP);
disable_s2_shutdown = true;
} else {
chip->thresh = THRESH_MAX;
if (chip->adc)
disable_s2_shutdown = true;
else
dev_warn(chip->dev,
"No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.\n");
}
skip:
reg |= chip->thresh;
if (disable_s2_shutdown)
reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
}
static int qpnp_tm_set_trip_temp(void *data, int trip, int temp)
{
struct qpnp_tm_chip *chip = data;
const struct thermal_trip *trip_points;
int ret;
trip_points = of_thermal_get_trip_points(chip->tz_dev);
if (!trip_points)
return -EINVAL;
if (trip_points[trip].type != THERMAL_TRIP_CRITICAL)
return 0;
mutex_lock(&chip->lock);
ret = qpnp_tm_update_critical_trip_temp(chip, temp);
mutex_unlock(&chip->lock);
return ret;
}
static const struct thermal_zone_of_device_ops qpnp_tm_sensor_ops = {
.get_temp = qpnp_tm_get_temp,
.set_trip_temp = qpnp_tm_set_trip_temp,
};
static irqreturn_t qpnp_tm_isr(int irq, void *data)
@ -193,6 +281,29 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
return IRQ_HANDLED;
}
static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
{
int ntrips;
const struct thermal_trip *trips;
int i;
ntrips = of_thermal_get_ntrips(chip->tz_dev);
if (ntrips <= 0)
return THERMAL_TEMP_INVALID;
trips = of_thermal_get_trip_points(chip->tz_dev);
if (!trips)
return THERMAL_TEMP_INVALID;
for (i = 0; i < ntrips; i++) {
if (of_thermal_is_trip_valid(chip->tz_dev, i) &&
trips[i].type == THERMAL_TRIP_CRITICAL)
return trips[i].temperature;
}
return THERMAL_TEMP_INVALID;
}
/*
* This function initializes the internal temp value based on only the
* current thermal stage and threshold. Setup threshold control and
@ -203,17 +314,20 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip)
unsigned int stage;
int ret;
u8 reg = 0;
int crit_temp;
mutex_lock(&chip->lock);
ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, &reg);
if (ret < 0)
return ret;
goto out;
chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
chip->temp = DEFAULT_TEMP;
ret = qpnp_tm_get_temp_stage(chip);
if (ret < 0)
return ret;
goto out;
chip->stage = ret;
stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
@ -224,21 +338,19 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip)
(stage - 1) * TEMP_STAGE_STEP +
TEMP_THRESH_MIN;
/*
* Set threshold and disable software override of stage 2 and 3
* shutdowns.
*/
chip->thresh = THRESH_MIN;
reg &= ~(SHUTDOWN_CTRL1_OVERRIDE_MASK | SHUTDOWN_CTRL1_THRESHOLD_MASK);
reg |= chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
crit_temp = qpnp_tm_get_critical_trip_temp(chip);
ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
if (ret < 0)
return ret;
goto out;
/* Enable the thermal alarm PMIC module in always-on mode. */
reg = ALARM_CTRL_FORCE_ENABLE;
ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg);
chip->initialized = true;
out:
mutex_unlock(&chip->lock);
return ret;
}
@ -257,6 +369,9 @@ static int qpnp_tm_probe(struct platform_device *pdev)
return -ENOMEM;
dev_set_drvdata(&pdev->dev, chip);
chip->dev = &pdev->dev;
mutex_init(&chip->lock);
chip->map = dev_get_regmap(pdev->dev.parent, NULL);
if (!chip->map)
@ -302,6 +417,18 @@ static int qpnp_tm_probe(struct platform_device *pdev)
chip->subtype = subtype;
/*
* Register the sensor before initializing the hardware to be able to
* read the trip points. get_temp() returns the default temperature
* before the hardware initialization is completed.
*/
chip->tz_dev = devm_thermal_zone_of_sensor_register(
&pdev->dev, 0, chip, &qpnp_tm_sensor_ops);
if (IS_ERR(chip->tz_dev)) {
dev_err(&pdev->dev, "failed to register sensor\n");
return PTR_ERR(chip->tz_dev);
}
ret = qpnp_tm_init(chip);
if (ret < 0) {
dev_err(&pdev->dev, "init failed\n");
@ -313,12 +440,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip,
&qpnp_tm_sensor_ops);
if (IS_ERR(chip->tz_dev)) {
dev_err(&pdev->dev, "failed to register sensor\n");
return PTR_ERR(chip->tz_dev);
}
thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
return 0;
}