ARM: pxa168: Add board support for gplugD
Tested UART console, Ethernet & I2C interfaces Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>hifive-unleashed-5.1
Tanmay Upadhyay
Eric Miao
parent
80def0dc35
commit
f16e05c750
|
|
@ -77,6 +77,13 @@ config MACH_TETON_BGA
|
|||
Say 'Y' here if you want to support the Marvell PXA168-based
|
||||
Teton BGA Development Board.
|
||||
|
||||
config MACH_SHEEVAD
|
||||
bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
|
||||
select CPU_PXA168
|
||||
help
|
||||
Say 'Y' here if you want to support the Marvell PXA168-based
|
||||
GuruPlug Display (gplugD) Board
|
||||
|
||||
endmenu
|
||||
|
||||
config CPU_PXA168
|
||||
|
|
|
|||
|
|
@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o
|
|||
obj-$(CONFIG_MACH_FLINT) += flint.o
|
||||
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
|
||||
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
|
||||
obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,189 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-mmp/gplugd.c
|
||||
*
|
||||
* Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* publishhed by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/gpio.h>
|
||||
#include <mach/pxa168.h>
|
||||
#include <mach/mfp-pxa168.h>
|
||||
#include <mach/mfp-gplugd.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
static unsigned long gplugd_pin_config[] __initdata = {
|
||||
/* UART3 */
|
||||
GPIO8_UART3_SOUT,
|
||||
GPIO9_UART3_SIN,
|
||||
GPI1O_UART3_CTS,
|
||||
GPI11_UART3_RTS,
|
||||
|
||||
/* MMC2 */
|
||||
GPIO28_MMC2_CMD,
|
||||
GPIO29_MMC2_CLK,
|
||||
GPIO30_MMC2_DAT0,
|
||||
GPIO31_MMC2_DAT1,
|
||||
GPIO32_MMC2_DAT2,
|
||||
GPIO33_MMC2_DAT3,
|
||||
|
||||
/* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
|
||||
GPIO35_GPIO,
|
||||
GPIO36_GPIO, /* CEC Interrupt */
|
||||
|
||||
/* MMC1 */
|
||||
GPIO43_MMC1_CLK,
|
||||
GPIO49_MMC1_CMD,
|
||||
GPIO41_MMC1_DAT0,
|
||||
GPIO40_MMC1_DAT1,
|
||||
GPIO52_MMC1_DAT2,
|
||||
GPIO51_MMC1_DAT3,
|
||||
GPIO53_MMC1_CD,
|
||||
|
||||
/* LCD */
|
||||
GPIO56_LCD_FCLK_RD,
|
||||
GPIO57_LCD_LCLK_A0,
|
||||
GPIO58_LCD_PCLK_WR,
|
||||
GPIO59_LCD_DENA_BIAS,
|
||||
GPIO60_LCD_DD0,
|
||||
GPIO61_LCD_DD1,
|
||||
GPIO62_LCD_DD2,
|
||||
GPIO63_LCD_DD3,
|
||||
GPIO64_LCD_DD4,
|
||||
GPIO65_LCD_DD5,
|
||||
GPIO66_LCD_DD6,
|
||||
GPIO67_LCD_DD7,
|
||||
GPIO68_LCD_DD8,
|
||||
GPIO69_LCD_DD9,
|
||||
GPIO70_LCD_DD10,
|
||||
GPIO71_LCD_DD11,
|
||||
GPIO72_LCD_DD12,
|
||||
GPIO73_LCD_DD13,
|
||||
GPIO74_LCD_DD14,
|
||||
GPIO75_LCD_DD15,
|
||||
GPIO76_LCD_DD16,
|
||||
GPIO77_LCD_DD17,
|
||||
GPIO78_LCD_DD18,
|
||||
GPIO79_LCD_DD19,
|
||||
GPIO80_LCD_DD20,
|
||||
GPIO81_LCD_DD21,
|
||||
GPIO82_LCD_DD22,
|
||||
GPIO83_LCD_DD23,
|
||||
|
||||
/* GPIO */
|
||||
GPIO84_GPIO,
|
||||
GPIO85_GPIO,
|
||||
|
||||
/* Fast-Ethernet*/
|
||||
GPIO86_TX_CLK,
|
||||
GPIO87_TX_EN,
|
||||
GPIO88_TX_DQ3,
|
||||
GPIO89_TX_DQ2,
|
||||
GPIO90_TX_DQ1,
|
||||
GPIO91_TX_DQ0,
|
||||
GPIO92_MII_CRS,
|
||||
GPIO93_MII_COL,
|
||||
GPIO94_RX_CLK,
|
||||
GPIO95_RX_ER,
|
||||
GPIO96_RX_DQ3,
|
||||
GPIO97_RX_DQ2,
|
||||
GPIO98_RX_DQ1,
|
||||
GPIO99_RX_DQ0,
|
||||
GPIO100_MII_MDC,
|
||||
GPIO101_MII_MDIO,
|
||||
GPIO103_RX_DV,
|
||||
GPIO104_GPIO, /* Reset PHY */
|
||||
|
||||
/* RTC interrupt */
|
||||
GPIO102_GPIO,
|
||||
|
||||
/* I2C */
|
||||
GPIO105_CI2C_SDA,
|
||||
GPIO106_CI2C_SCL,
|
||||
|
||||
/* Select JTAG */
|
||||
GPIO109_GPIO,
|
||||
|
||||
/* I2S */
|
||||
GPIO114_I2S_FRM,
|
||||
GPIO115_I2S_BCLK,
|
||||
GPIO116_I2S_TXD
|
||||
};
|
||||
|
||||
static struct i2c_board_info gplugd_i2c_board_info[] = {
|
||||
{
|
||||
.type = "isl1208",
|
||||
.addr = 0x6F,
|
||||
}
|
||||
};
|
||||
|
||||
/* Bring PHY out of reset by setting GPIO 104 */
|
||||
static int gplugd_eth_init(void)
|
||||
{
|
||||
if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
|
||||
printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
|
||||
"PHY out of reset\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
gpio_direction_output(104, 1);
|
||||
gpio_free(104);
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct pxa168_eth_platform_data gplugd_eth_platform_data = {
|
||||
.port_number = 0,
|
||||
.phy_addr = 0,
|
||||
.speed = 0, /* Autonagotiation */
|
||||
.init = gplugd_eth_init,
|
||||
};
|
||||
|
||||
static void __init select_disp_freq(void)
|
||||
{
|
||||
/* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
|
||||
if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
|
||||
printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
|
||||
"frequency\n");
|
||||
} else {
|
||||
gpio_direction_output(35, 1);
|
||||
gpio_free(104);
|
||||
}
|
||||
|
||||
if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
|
||||
printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
|
||||
"frequency\n");
|
||||
} else {
|
||||
gpio_direction_output(85, 0);
|
||||
gpio_free(104);
|
||||
}
|
||||
}
|
||||
|
||||
static void __init gplugd_init(void)
|
||||
{
|
||||
mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
|
||||
|
||||
select_disp_freq();
|
||||
|
||||
/* on-chip devices */
|
||||
pxa168_add_uart(3);
|
||||
pxa168_add_ssp(0);
|
||||
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
|
||||
|
||||
pxa168_add_eth(&gplugd_eth_platform_data);
|
||||
}
|
||||
|
||||
MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform")
|
||||
.map_io = mmp_map_io,
|
||||
.nr_irqs = IRQ_BOARD_START,
|
||||
.init_irq = pxa168_init_irq,
|
||||
.timer = &pxa168_timer,
|
||||
.init_machine = gplugd_init,
|
||||
MACHINE_END
|
||||
|
|
@ -0,0 +1,52 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
|
||||
*
|
||||
* MFP definitions used in gplugD
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __MACH_MFP_GPLUGD_H
|
||||
#define __MACH_MFP_GPLUGD_H
|
||||
|
||||
#include <plat/mfp.h>
|
||||
#include <mach/mfp.h>
|
||||
|
||||
/* UART3 */
|
||||
#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2)
|
||||
#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2)
|
||||
#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2)
|
||||
#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2)
|
||||
|
||||
/* MMC2 */
|
||||
#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST)
|
||||
#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST)
|
||||
#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST)
|
||||
#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST)
|
||||
#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST)
|
||||
#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST)
|
||||
|
||||
/* I2S */
|
||||
#undef GPIO114_I2S_FRM
|
||||
#undef GPIO115_I2S_BCLK
|
||||
|
||||
#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST)
|
||||
#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST)
|
||||
#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST)
|
||||
|
||||
/* MMC4 */
|
||||
#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST)
|
||||
#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST)
|
||||
#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST)
|
||||
#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST)
|
||||
#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST)
|
||||
#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST)
|
||||
|
||||
/* OTG GPIO */
|
||||
#define GPIO_USB_OTG_PEN 18
|
||||
#define GPIO_USB_OIDIR 20
|
||||
|
||||
/* Other GPIOs are 35, 84, 85 */
|
||||
#endif /* __MACH_MFP_GPLUGD_H */
|
||||
Loading…
Reference in New Issue