redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: SoC cleanups for 3.14 

This is the branch where we usually queue up cleanup efforts, moving
 drivers out of the architecture directory, header file restructuring,
 etc. Sometimes they tangle with new development so it's hard to keep it
 strictly to cleanups.
 
 Some of the things included in this branch are:
 
 * Atmel SAMA5 conversion to common clock
 * Reset framework conversion for tegra platforms
  - Some of this depends on tegra clock driver reworks that are shared with Mike
    Turquette's clk tree.
 * Tegra DMA refactoring, which are shared branches with the DMA tree.
 * Removal of some header files on exynos to prepare for multiplatform
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4Vf7AAoJEIwa5zzehBx3f9UP/jwMlbfbSZHfNQ/QG0SqZ9RD
 zvddyDMHY/qXnzgF3Dax+JR9BDDVy8AlQe713FCoiHJZggWRAbbavkx8gxITDrZQ
 6NYaEkkuVxqyM8APl3PwMqYm8UZ8MUf4lCltlOA4jkesY9vue91AFnfyKh2CvHrn
 Leg4XT6mFzf/vYDL6RbvTz/Qr253uv3KvYBxkeiRNa0Y7OXRemEXSOfgxh0YGxUl
 LZ2IWQFOh/DH4kaeQI8V4G67X3ceHiFyhCnl0CPwfxaZaNBVaxvIFgIUTdetS6Sb
 zcXa029tE/Dfsr55vZAv9LUHEipCSOeE5rn2EJWehTWyM7vJ42Eozqgh+zfCjXS7
 Ib6g2npsvIluQit/RdITu44h5yZlrQsLgKTGJ8jjXqbT4HQ/746W8b/TP0YLtbw7
 N8oqr7k4vsZyF0dAYZQtfQUZeGISz67UbFcdzl9tmYOR7HFuAYkAQYst77zkVJf8
 om59BAYYTG5FNjQ4I9AKUfJzxXYveI6AKpXSCCZiahpFM2D1CJIzp9Wi0GwK1HRR
 sFVWhS0dajvz63pVVC2tw5Sq4J7onRRNGIXFPoE5fkmlelm0/q0zzGjw3Z0nTqbZ
 8zxuwuy2FfPJK11GbUAIhAgn1sCLYyAhl6IE+FsanGeMOSGIMrH0v5/HphAxoCXt
 BvqMDogyLoGPce1Gm3pJ
 =3CcT
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is the branch where we usually queue up cleanup efforts, moving
  drivers out of the architecture directory, header file restructuring,
  etc.  Sometimes they tangle with new development so it's hard to keep
  it strictly to cleanups.

  Some of the things included in this branch are:

   * Atmel SAMA5 conversion to common clock
   * Reset framework conversion for tegra platforms
    - Some of this depends on tegra clock driver reworks that are shared
      with Mike Turquette's clk tree.
   * Tegra DMA refactoring, which are shared branches with the DMA tree.
   * Removal of some header files on exynos to prepare for
     multiplatform"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
  ARM: mvebu: remove prototypes of non-existing functions from common.h
  ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
  serial: sh-sci: Rework baud rate calculation
  serial: sh-sci: Compute overrun_bit without using baud rate algo
  serial: sh-sci: Remove unused GPIO request code
  serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
  serial: sh-sci: Support resources passed through platform resources
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Sort headers alphabetically
  ARM: EXYNOS: Kill exynos_pm_late_initcall()
  ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
  ARM: at91: switch Calao QIL-A9260 board to DT
  clk: at91: fix pmc_clk_ids data type attriubte
  PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
  ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
  ...
hifive-unleashed-5.1
Linus Torvalds 2014-01-23 18:36:55 -08:00
parent 93abdb7785 273c2279ca
commit f2c73464d7
233 changed files with 11401 additions and 5157 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
View File

@ -9,6 +9,7 @@ Required properties:
- compatible : Should contain "nvidia,tegra<chip>-pmc".
- reg : Offset and length of the register set for the device
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pclk" (The Tegra clock of that name),
"clk32k_in" (The 32KHz clock input to Tegra).

339
Documentation/devicetree/bindings/clock/at91-clock.txt 100644
View File

@ -0,0 +1,339 @@
Device Tree Clock bindings for arch-at91
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be one of the following:
"atmel,at91rm9200-pmc" or
"atmel,at91sam9g45-pmc" or
"atmel,at91sam9n12-pmc" or
"atmel,at91sam9x5-pmc" or
"atmel,sama5d3-pmc":
at91 PMC (Power Management Controller)
All at91 specific clocks (clocks defined below) must be child
node of the PMC node.
"atmel,at91rm9200-clk-main":
at91 main oscillator
"atmel,at91rm9200-clk-master" or
"atmel,at91sam9x5-clk-master":
at91 master clock
"atmel,at91sam9x5-clk-peripheral" or
"atmel,at91rm9200-clk-peripheral":
at91 peripheral clocks
"atmel,at91rm9200-clk-pll" or
"atmel,at91sam9g45-clk-pll" or
"atmel,at91sam9g20-clk-pllb" or
"atmel,sama5d3-clk-pll":
at91 pll clocks
"atmel,at91sam9x5-clk-plldiv":
at91 plla divisor
"atmel,at91rm9200-clk-programmable" or
"atmel,at91sam9g45-clk-programmable" or
"atmel,at91sam9x5-clk-programmable":
at91 programmable clocks
"atmel,at91sam9x5-clk-smd":
at91 SMD (Soft Modem) clock
"atmel,at91rm9200-clk-system":
at91 system clocks
"atmel,at91rm9200-clk-usb" or
"atmel,at91sam9x5-clk-usb" or
"atmel,at91sam9n12-clk-usb":
at91 usb clock
"atmel,at91sam9x5-clk-utmi":
at91 utmi clock
Required properties for PMC node:
- reg : defines the IO memory reserved for the PMC.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
- interrupts : shall be set to PMC interrupt line.
- interrupt-controller : tell that the PMC is an interrupt controller.
- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
and reflect the bit position in the PMC_ER/DR/SR registers.
You can use the dt macros defined in dt-bindings/clk/at91.h.
0 (AT91_PMC_MOSCS) -> main oscillator ready
1 (AT91_PMC_LOCKA) -> PLL A ready
2 (AT91_PMC_LOCKB) -> PLL B ready
3 (AT91_PMC_MCKRDY) -> master clock ready
6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready
8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready
16 (AT91_PMC_MOSCSELS) -> main oscillator selected
17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized
18 (AT91_PMC_CFDEV) -> clock failure detected
For example:
pmc: pmc@fffffc00 {
compatible = "atmel,sama5d3-pmc";
interrupts = <1 4 7>;
interrupt-controller;
#interrupt-cells = <2>;
#size-cells = <0>;
#address-cells = <1>;
/* put at91 clocks here */
};
Required properties for main clock:
- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks (optional if clock-frequency is provided) : shall be the slow clock
phandle. This clock is used to calculate the main clock rate if
"clock-frequency" is not provided.
- clock-frequency : the main oscillator frequency.Prefer the use of
"clock-frequency" over automatic clock rate calculation.
For example:
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
interrupt-parent = <&pmc>;
interrupts = <0>;
#clock-cells = <0>;
clocks = <&ck32k>;
clock-frequency = <18432000>;
};
Required properties for master clock:
- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<3>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the master clock sources (see atmel datasheet) phandles.
e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>".
- atmel,clk-output-range : minimum and maximum clock frequency (two u32
fields).
e.g. output = <0 133000000>; <=> 0 to 133MHz.
- atmel,clk-divisors : master clock divisors table (four u32 fields).
0 <=> reserved value.
e.g. divisors = <1 2 4 6>;
- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the
PRES field as CLOCK_DIV3 (e.g sam9x5).
For example:
mck: mck {
compatible = "atmel,at91rm9200-clk-master";
interrupt-parent = <&pmc>;
interrupts = <3>;
#clock-cells = <0>;
atmel,clk-output-range = <0 133000000>;
atmel,clk-divisors = <1 2 4 0>;
};
Required properties for peripheral clocks:
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
- clocks : shall be the master clock phandle.
e.g. clocks = <&mck>;
- name: device tree node describing a specific system clock.
* #clock-cells : from common clock binding; shall be set to 0.
* reg: peripheral id. See Atmel's datasheets to get a full
list of peripheral ids.
* atmel,clk-output-range : minimum and maximum clock frequency
(two u32 fields). Only valid on at91sam9x5-clk-peripheral
compatible IPs.
For example:
periph: periphck {
compatible = "atmel,at91sam9x5-clk-peripheral";
#size-cells = <0>;
#address-cells = <1>;
clocks = <&mck>;
ssc0_clk {
#clock-cells = <0>;
reg = <2>;
atmel,clk-output-range = <0 133000000>;
};
usart0_clk {
#clock-cells = <0>;
reg = <3>;
atmel,clk-output-range = <0 66000000>;
};
};
Required properties for pll clocks:
- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<1>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock phandle.
- reg : pll id.
0 -> PLL A
1 -> PLL B
- atmel,clk-input-range : minimum and maximum source clock frequency (two u32
fields).
e.g. input = <1 32000000>; <=> 1 to 32MHz.
- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output
range description. Sould be set to 2, 3
or 4.
* 1st and 2nd cells represent the frequency range (min-max).
* 3rd cell is optional and represents the OUT field value for the given
range.
* 4th cell is optional and represents the ICPLL field (PLLICPR
register)
- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter
depending on #atmel,pll-output-range-cells
property value.
For example:
plla: pllack {
compatible = "atmel,at91sam9g45-clk-pll";
interrupt-parent = <&pmc>;
interrupts = <1>;
#clock-cells = <0>;
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <2000000 32000000>;
#atmel,pll-clk-output-range-cells = <4>;
atmel,pll-clk-output-ranges = <74500000 800000000 0 0
69500000 750000000 1 0
64500000 700000000 2 0
59500000 650000000 3 0
54500000 600000000 0 1
49500000 550000000 1 1
44500000 500000000 2 1
40000000 450000000 3 1>;
};
Required properties for plldiv clocks (plldiv = pll / 2):
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the plla clock phandle.
The pll divisor is equal to 2 and cannot be changed.
For example:
plladiv: plladivck {
compatible = "atmel,at91sam9x5-clk-plldiv";
#clock-cells = <0>;
clocks = <&plla>;
};
Required properties for programmable clocks:
- interrupt-parent : must reference the PMC node.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
- clocks : shall be the programmable clock source phandles.
e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
- name: device tree node describing a specific prog clock.
* #clock-cells : from common clock binding; shall be set to 0.
* reg : programmable clock id (register offset from PCKx
register).
* interrupts : shall be set to "<(8 + id)>".
For example:
prog: progck {
compatible = "atmel,at91sam9g45-clk-programmable";
#size-cells = <0>;
#address-cells = <1>;
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
prog0 {
#clock-cells = <0>;
reg = <0>;
interrupts = <8>;
};
prog1 {
#clock-cells = <0>;
reg = <1>;
interrupts = <9>;
};
};
Required properties for smd clock:
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the smd clock source phandles.
e.g. clocks = <&plladiv>, <&utmi>;
For example:
smd: smdck {
compatible = "atmel,at91sam9x5-clk-smd";
#clock-cells = <0>;
clocks = <&plladiv>, <&utmi>;
};
Required properties for system clocks:
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
- name: device tree node describing a specific system clock.
* #clock-cells : from common clock binding; shall be set to 0.
* reg: system clock id (bit position in SCER/SCDR/SCSR registers).
See Atmel's datasheet to get a full list of system clock ids.
For example:
system: systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
#size-cells = <0>;
ddrck {
#clock-cells = <0>;
reg = <2>;
clocks = <&mck>;
};
uhpck {
#clock-cells = <0>;
reg = <6>;
clocks = <&usb>;
};
udpck {
#clock-cells = <0>;
reg = <7>;
clocks = <&usb>;
};
};
Required properties for usb clock:
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the smd clock source phandles.
e.g. clocks = <&pllb>;
- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"):
usb clock divisor table.
e.g. divisors = <1 2 4 0>;
For example:
usb: usbck {
compatible = "atmel,at91sam9x5-clk-usb";
#clock-cells = <0>;
clocks = <&plladiv>, <&utmi>;
};
usb: usbck {
compatible = "atmel,at91rm9200-clk-usb";
#clock-cells = <0>;
clocks = <&pllb>;
atmel,clk-divisors = <1 2 4 0>;
};
Required properties for utmi clock:
- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock source phandle.
For example:
utmi: utmick {
compatible = "atmel,at91sam9x5-clk-utmi";
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <0>;
clocks = <&main>;
};

4
Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
View File

@ -15,6 +15,9 @@ Required properties :
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra114-car.h>.
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
@ -23,6 +26,7 @@ Example SoC include file:
compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb@c5004000 {

63
Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt 100644
View File

@ -0,0 +1,63 @@
NVIDIA Tegra124 Clock And Reset Controller
This binding uses the common clock binding:
Documentation/devicetree/bindings/clock/clock-bindings.txt
The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
for muxing and gating Tegra's clocks, and setting their rates.
Required properties :
- compatible : Should be "nvidia,tegra124-car"
- reg : Should contain CAR registers location and length
- clocks : Should contain phandle and clock specifiers for two clocks:
the 32 KHz "32k_in", and the board-specific oscillator "osc".
- #clock-cells : Should be 1.
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra124-car.h>.
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
/ {
tegra_car: clock {
compatible = "nvidia,tegra124-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb@c5004000 {
clocks = <&tegra_car TEGRA124_CLK_USB2>;
};
};
Example board file:
/ {
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
osc: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <112400000>;
};
clk_32k: clock@1 {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
&tegra_car {
clocks = <&clk_32k> <&osc>;
};
};

4
Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
View File

@ -15,6 +15,9 @@ Required properties :
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra20-car.h>.
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
@ -23,6 +26,7 @@ Example SoC include file:
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb@c5004000 {

4
Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
View File

@ -15,6 +15,9 @@ Required properties :
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra30-car.h>.
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
@ -23,6 +26,7 @@ Example SoC include file:
compatible = "nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb@c5004000 {

14
Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
View File

@ -5,6 +5,16 @@ Required properties:
- reg: Should contain DMA registers location and length. This shuld include
all of the per-channel registers.
- interrupts: Should contain all of the per-channel DMA interrupts.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- dma
- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
client nodes' dmas properties. The specifier represents the DMA request
select value for the peripheral. For more details, consult the Tegra TRM's
documentation of the APB DMA channel control register REQ_SEL field.
Examples:
@ -27,4 +37,8 @@ apbdma: dma@6000a000 {
0 149 0x04
0 150 0x04
0 151 0x04 >;
clocks = <&tegra_car 34>;
resets = <&tegra_car 34>;
reset-names = "dma";
#dma-cells = <1>;
};

122
Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
View File

@ -9,6 +9,12 @@ Required properties:
- #size-cells: The number of cells used to represent the size of an address
range in the host1x address space. Should be 1.
- ranges: The mapping of the host1x address space to the CPU address space.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- host1x
The host1x top-level node defines a number of children, each representing one
of the following host1x client modules:
@ -19,6 +25,12 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-mpe"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- mpe
- vi: video input
@ -26,6 +38,12 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-vi"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- vi
- epp: encoder pre-processor
@ -33,6 +51,12 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-epp"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- epp
- isp: image signal processor
@ -40,6 +64,12 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-isp"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- isp
- gr2d: 2D graphics engine
@ -47,12 +77,30 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-gr2d"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- 2d
- gr3d: 3D graphics engine
Required properties:
- compatible: "nvidia,tegra<chip>-gr3d"
- reg: Physical base address and length of the controller's registers.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
(This property may be omitted if the only clock in the list is "3d")
- 3d
This MUST be the first entry.
- 3d2 (Only required on SoCs with two 3D clocks)
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- 3d
- 3d2 (Only required on SoCs with two 3D clocks)
- dc: display controller
@ -60,6 +108,16 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-dc"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- dc
This MUST be the first entry.
- parent
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- dc
Each display controller node has a child node, named "rgb", that represents
the RGB output associated with the controller. It can take the following
@ -76,6 +134,16 @@ of the following host1x client modules:
- interrupts: The interrupt outputs from the controller.
- vdd-supply: regulator for supply voltage
- pll-supply: regulator for PLL
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- hdmi
This MUST be the first entry.
- parent
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- hdmi
Optional properties:
- nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
@ -88,12 +156,24 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-tvo"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- dsi: display serial interface
Required properties:
- compatible: "nvidia,tegra<chip>-dsi"
- reg: Physical base address and length of the controller's registers.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- dsi
This MUST be the first entry.
- parent
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- dsi
Example:
@ -105,6 +185,9 @@ Example:
reg = <0x50000000 0x00024000>;
interrupts = <0 65 0x04 /* mpcore syncpt */
0 67 0x04>; /* mpcore general */
clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
@ -115,41 +198,64 @@ Example:
compatible = "nvidia,tegra20-mpe";
reg = <0x54040000 0x00040000>;
interrupts = <0 68 0x04>;
clocks = <&tegra_car TEGRA20_CLK_MPE>;
resets = <&tegra_car 60>;
reset-names = "mpe";
};
vi {
compatible = "nvidia,tegra20-vi";
reg = <0x54080000 0x00040000>;
interrupts = <0 69 0x04>;
clocks = <&tegra_car TEGRA20_CLK_VI>;
resets = <&tegra_car 100>;
reset-names = "vi";
};
epp {
compatible = "nvidia,tegra20-epp";
reg = <0x540c0000 0x00040000>;
interrupts = <0 70 0x04>;
clocks = <&tegra_car TEGRA20_CLK_EPP>;
resets = <&tegra_car 19>;
reset-names = "epp";
};
isp {
compatible = "nvidia,tegra20-isp";
reg = <0x54100000 0x00040000>;
interrupts = <0 71 0x04>;
clocks = <&tegra_car TEGRA20_CLK_ISP>;
resets = <&tegra_car 23>;
reset-names = "isp";
};
gr2d {
compatible = "nvidia,tegra20-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <0 72 0x04>;
clocks = <&tegra_car TEGRA20_CLK_GR2D>;
resets = <&tegra_car 21>;
reset-names = "2d";
};
gr3d {
compatible = "nvidia,tegra20-gr3d";
reg = <0x54180000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_GR3D>;
resets = <&tegra_car 24>;
reset-names = "3d";
};
dc@54200000 {
compatible = "nvidia,tegra20-dc";
reg = <0x54200000 0x00040000>;
interrupts = <0 73 0x04>;
clocks = <&tegra_car TEGRA20_CLK_DISP1>,
<&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp1", "parent";
resets = <&tegra_car 27>;
reset-names = "dc";
rgb {
status = "disabled";
@ -160,6 +266,11 @@ Example:
compatible = "nvidia,tegra20-dc";
reg = <0x54240000 0x00040000>;
interrupts = <0 74 0x04>;
clocks = <&tegra_car TEGRA20_CLK_DISP2>,
<&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp2", "parent";
resets = <&tegra_car 26>;
reset-names = "dc";
rgb {
status = "disabled";
@ -170,6 +281,11 @@ Example:
compatible = "nvidia,tegra20-hdmi";
reg = <0x54280000 0x00040000>;
interrupts = <0 75 0x04>;
clocks = <&tegra_car TEGRA20_CLK_HDMI>,
<&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
clock-names = "hdmi", "parent";
resets = <&tegra_car 51>;
reset-names = "hdmi";
status = "disabled";
};
@ -177,12 +293,18 @@ Example:
compatible = "nvidia,tegra20-tvo";
reg = <0x542c0000 0x00040000>;
interrupts = <0 76 0x04>;
clocks = <&tegra_car TEGRA20_CLK_TVO>;
status = "disabled";
};
dsi {
compatible = "nvidia,tegra20-dsi";
reg = <0x54300000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_DSI>,
<&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
clock-names = "dsi", "parent";
resets = <&tegra_car 48>;
reset-names = "dsi";
status = "disabled";
};
};

27
Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
View File

@ -39,12 +39,23 @@ Required properties:
- interrupts: Should contain I2C controller interrupts.
- address-cells: Address cells for I2C device address.
- size-cells: Size of the I2C device address.
- clocks: Clock ID as per
Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
for I2C controller.
- clock-names: Name of the clock:
Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
Tegra114 I2C controller: "div-clk".
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
Tegra20/Tegra30:
- div-clk
- fast-clk
Tegra114:
- div-clk
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- i2c
- dmas: Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names: Must include the following entries:
- rx
- tx
Example:
@ -56,5 +67,9 @@ Example:
#size-cells = <0>;
clocks = <&tegra_car 12>, <&tegra_car 124>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 12>;
reset-names = "i2c";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};

9
Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
View File

@ -13,6 +13,12 @@ Required properties:
array of pin numbers which is used as column.
- linux,keymap: The keymap for keys as described in the binding document
devicetree/bindings/input/matrix-keymap.txt.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- kbc
Optional properties, in addition to those specified by the shared
matrix-keyboard bindings:
@ -31,6 +37,9 @@ keyboard: keyboard {
compatible = "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
interrupts = <0 85 0x04>;
clocks = <&tegra_car 36>;
resets = <&tegra_car 36>;
reset-names = "kbc";
nvidia,ghost-filter;
nvidia,debounce-delay-ms = <640>;
nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */

9
Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
View File

@ -8,6 +8,12 @@ by mmc.txt and the properties used by the sdhci-tegra driver.
Required properties:
- compatible : Should be "nvidia,<chip>-sdhci"
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- sdhci
Optional properties:
- power-gpios : Specify GPIOs for power control
@ -18,6 +24,9 @@ sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
interrupts = <47>;
clocks = <&tegra_car 14>;
resets = <&tegra_car 14>;
reset-names = "sdhci";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */

12
Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
View File

@ -7,3 +7,15 @@ Required properties:
- clock-frequency : the frequency of the i2c bus
- gpios : the gpio used for ec request
- slave-addr: the i2c address of the slave controller
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
Tegra20/Tegra30:
- div-clk
- fast-clk
Tegra114:
- div-clk
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- i2c

26
Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
View File

@ -42,14 +42,19 @@ Required properties:
- 0xc2000000: prefetchable memory region
Please refer to the standard PCI bus binding document for a more detailed
explanation.
- clocks: List of clock inputs of the controller. Must contain an entry for
each entry in the clock-names property.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
"pex": The Tegra clock of that name
"afi": The Tegra clock of that name
"pcie_xclk": The Tegra clock of that name
"pll_e": The Tegra clock of that name
"cml": The Tegra clock of that name (not required for Tegra20)
- pex
- afi
- pll_e
- cml (not required for Tegra20)
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- pex
- afi
- pcie_x
Root ports are defined as subnodes of the PCIe controller node.
@ -91,9 +96,10 @@ SoC DTSI:
0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */
0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>,
<&tegra_car 118>;
clock-names = "pex", "afi", "pcie_xclk", "pll_e";
clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
clock-names = "pex", "afi", "pll_e";
resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {

9
Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
View File

@ -7,6 +7,12 @@ Required properties:
- reg: physical base address and length of the controller's registers
- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
the cells format.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- pwm
Example:
@ -14,4 +20,7 @@ Example:
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car 17>;
resets = <&tegra_car 17>;
reset-names = "pwm";
};

3
Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt
View File

@ -9,6 +9,8 @@ Required properties:
- compatible : should be "nvidia,tegra20-rtc".
- reg : Specifies base physical address and size of the registers.
- interrupts : A single interrupt specifier.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
Example:
@ -16,4 +18,5 @@ timer {
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
clocks = <&tegra_car 4>;
};

19
Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
View File

@ -4,8 +4,17 @@ Required properties:
- compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
- reg: Should contain UART controller registers location and length.
- interrupts: Should contain UART controller interrupts.
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this UART controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- serial
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
Optional properties:
- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
@ -18,7 +27,11 @@ serial@70006000 {
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
nvidia,dma-request-selector = <&apbdma 8>;
nvidia,enable-modem-interrupt;
clocks = <&tegra_car 6>;
resets = <&tegra_car 6>;
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
status = "disabled";
};

7
Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
View File

@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-alc5632"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,

7
Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
View File

@ -3,10 +3,11 @@ NVIDIA Tegra audio complex, with RT5640 CODEC
Required properties:
- compatible : "nvidia,tegra-audio-rt5640"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,

7
Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
View File

@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm8753"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,

7
Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
View File

@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm8903"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,

7
Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
View File

@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm9712"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,

20
Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
View File

@ -4,19 +4,33 @@ Required properties:
- compatible : "nvidia,tegra20-ac97"
- reg : Should contain AC97 controller registers location and length
- interrupts : Should contain AC97 interrupt
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for the AC97 controller
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- ac97
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
of the GPIO used to reset the external AC97 codec
- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
of the GPIO corresponding with the AC97 DAP _FS line
Example:
ac97@70002000 {
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
interrupts = <0 81 0x04>;
nvidia,dma-request-selector = <&apbdma 12>;
nvidia,codec-reset-gpio = <&gpio 170 0>;
nvidia,codec-sync-gpio = <&gpio 120 0>;
clocks = <&tegra_car 3>;
resets = <&tegra_car 3>;
reset-names = "ac97";
dmas = <&apbdma 12>, <&apbdma 12>;
dma-names = "rx", "tx";
};

19
Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
View File

@ -4,8 +4,17 @@ Required properties:
- compatible : "nvidia,tegra20-i2s"
- reg : Should contain I2S registers location and length
- interrupts : Should contain I2S interrupt
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this I2S controller
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- i2s
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
Example:
@ -13,5 +22,9 @@ i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 45 >;
nvidia,dma-request-selector = < &apbdma 2 >;
clocks = <&tegra_car 11>;
resets = <&tegra_car 11>;
reset-names = "i2s";
dmas = <&apbdma 21>, <&apbdma 21>;
dma-names = "rx", "tx";
};

63
Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
View File

@ -7,18 +7,48 @@ Required properties:
- Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
- Tegra114 requires an additional entry, for the APBIF2 register block.
- interrupts : Should contain AHUB interrupt
- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
entry contains the Tegra DMA controller's phandle and request selector.
If a single entry is present, the request selectors for the channels are
assumed to be contiguous, and increment from this value.
If multiple values are given, one value must be given per channel.
- clocks : Must contain an entry for each required entry in clock-names.
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
dam1, dam2, spdif_in.
- Tegra114: Additionally requires amx, adx.
- d_audio
- apbif
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
Tegra30 and later:
- d_audio
- apbif
- i2s0
- i2s1
- i2s2
- i2s3
- i2s4
- dam0
- dam1
- dam2
- spdif
Tegra114 and later additionally require:
- amx
- adx
Tegra124 and later additionally require:
- amx1
- adx1
- afc0
- afc1
- afc2
- afc3
- afc4
- afc5
- ranges : The bus address mapping for the configlink register bus.
Can be empty since the mapping is 1:1.
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx0 .. rx<n>
- tx0 .. tx<n>
... where n is:
Tegra30: 3
Tegra114, Tegra124: 9
- #address-cells : For the configlink bus. Should be <1>;
- #size-cells : For the configlink bus. Should be <1>.
@ -35,13 +65,20 @@ ahub@70080000 {
reg = <0x70080000 0x200 0x70080200 0x100>;
interrupts = < 0 103 0x04 >;
nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
clocks = <&tegra_car 106>, <&tegra_car 107>;
clock-names = "d_audio", "apbif";
resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
<&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
<&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
<&tegra_car 110>, <&tegra_car 162>;
clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
<&tegra_car 110>, <&tegra_car 10>;
reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
"spdif_in";
"spdif";
dmas = <&apbdma 1>, <&apbdma 1>;
<&apbdma 2>, <&apbdma 2>;
<&apbdma 3>, <&apbdma 3>;
<&apbdma 4>, <&apbdma 4>;
dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3";
ranges;
#address-cells = <1>;
#size-cells = <1>;

11
Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
View File

@ -3,13 +3,22 @@ NVIDIA Tegra30 I2S controller
Required properties:
- compatible : "nvidia,tegra30-i2s"
- reg : Should contain I2S registers location and length
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- i2s
- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
Example:
i2s@70002800 {
i2s@70080300 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
clocks = <&tegra_car 11>;
resets = <&tegra_car 11>;
reset-names = "i2s";
};

24
Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
View File

@ -4,10 +4,19 @@ Required properties:
- compatible : should be "nvidia,tegra114-spi".
- reg: Should contain SPI registers location and length.
- interrupts: Should contain SPI interrupts.
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this SPI controller.
- This is also require clock named "spi" as per binding document
Documentation/devicetree/bindings/clock/clock-bindings.txt
- clock-names : Must include the following entries:
- spi
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- spi
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
Recommended properties:
- spi-max-frequency: Definition as per
@ -18,9 +27,14 @@ spi@7000d600 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
nvidia,dma-request-selector = <&apbdma 16>;
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 44>;
clock-names = "spi";
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};

20
Documentation/devicetree/bindings/spi/nvidia,tegra20-sflash.txt
View File

@ -4,8 +4,17 @@ Required properties:
- compatible : should be "nvidia,tegra20-sflash".
- reg: Should contain SFLASH registers location and length.
- interrupts: Should contain SFLASH interrupts.
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this SFLASH controller.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- spi
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
Recommended properties:
- spi-max-frequency: Definition as per
@ -17,10 +26,13 @@ spi@7000c380 {
compatible = "nvidia,tegra20-sflash";
reg = <0x7000c380 0x80>;
interrupts = <0 39 0x04>;
nvidia,dma-request-selector = <&apbdma 16>;
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 43>;
resets = <&tegra_car 43>;
reset-names = "spi";
dmas = <&apbdma 11>, <&apbdma 11>;
dma-names = "rx", "tx";
status = "disabled";
};

20
Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
View File

@ -4,8 +4,17 @@ Required properties:
- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
- reg: Should contain SLINK registers location and length.
- interrupts: Should contain SLINK interrupts.
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this SLINK controller.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- spi
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
Recommended properties:
- spi-max-frequency: Definition as per
@ -17,10 +26,13 @@ spi@7000d600 {
compatible = "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
nvidia,dma-request-selector = <&apbdma 16>;
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 44>;
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};

3
Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
View File

@ -8,6 +8,8 @@ Required properties:
- compatible : should be "nvidia,tegra20-timer".
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 4 interrupts; one per timer channel.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
Example:
@ -18,4 +20,5 @@ timer {
0 1 0x04
0 41 0x04
0 42 0x04>;
clocks = <&tegra_car 132>;
};

3
Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
View File

@ -10,6 +10,8 @@ Required properties:
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 6 interrupts; one per each of timer channels 1
through 5, and one for the shared interrupt for the remaining channels.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
timer {
compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
@ -20,4 +22,5 @@ timer {
0 42 0x04
0 121 0x04
0 122 0x04>;
clocks = <&tegra_car 214>;
};

7
Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
View File

@ -8,7 +8,12 @@ and additions :
Required properties :
- compatible : Should be "nvidia,tegra20-ehci".
- nvidia,phy : phandle of the PHY that the controller is connected to.
- clocks : Contains a single entry which defines the USB controller's clock.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- usb
Optional properties:
- nvidia,needs-double-reset : boolean is to be set for some of the Tegra20

1
arch/arm/Kconfig
View File

@ -743,7 +743,6 @@ config ARCH_S3C64XX
select S3C_DEV_NAND
select S3C_GPIO_TRACK
select SAMSUNG_ATAGS
select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
select USB_ARCH_HAS_OHCI

1
arch/arm/boot/dts/Makefile
View File

@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb
# sam9260
dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
dtb-$(CONFIG_ARCH_AT91) += at91-qil_a9260.dtb
dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb

185
arch/arm/boot/dts/at91-qil_a9260.dts 100644
View File

@ -0,0 +1,185 @@
/*
* at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
*
* Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
/dts-v1/;
#include "at91sam9260.dtsi"
/ {
model = "Calao QIL A9260";
compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9";
chosen {
bootargs = "console=ttyS0,115200";
};
memory {
reg = <0x20000000 0x4000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
ahb {
apb {
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
mmc0: mmc@fffa8000 {
pinctrl-0 = <
&pinctrl_mmc0_clk
&pinctrl_mmc0_slot0_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
usart0: serial@fffb0000 {
pinctrl-0 =
<&pinctrl_usart0
&pinctrl_usart0_rts
&pinctrl_usart0_cts
&pinctrl_usart0_dtr_dsr
&pinctrl_usart0_dcd
&pinctrl_usart0_ri>;
status = "okay";
};
usart1: serial@fffb4000 {
pinctrl-0 =
<&pinctrl_usart1
&pinctrl_usart1_rts
&pinctrl_usart1_cts>;
status = "okay";
};
usart2: serial@fffb8000 {
pinctrl-0 =
<&pinctrl_usart2
&pinctrl_usart2_rts
&pinctrl_usart2_cts>;
status = "okay";
};
macb0: ethernet@fffc4000 {
phy-mode = "rmii";
status = "okay";
};
spi0: spi@fffc8000 {
status = "okay";
cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>;
m41t94@0 {
compatible = "st,m41t94";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
dbgu: serial@fffff200 {
status = "okay";
};
shdwc@fffffd10 {
atmel,wakeup-counter = <10>;
atmel,wakeup-rtt-timer;
};
};
usb0: ohci@00500000 {
num-ports = <2>;
status = "okay";
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
at91bootstrap@0 {
label = "at91bootstrap";
reg = <0x0 0x20000>;
};
barebox@20000 {
label = "barebox";
reg = <0x20000 0x40000>;
};
bareboxenv@60000 {
label = "bareboxenv";
reg = <0x60000 0x20000>;
};
bareboxenv2@80000 {
label = "bareboxenv2";
reg = <0x80000 0x20000>;
};
oftree@a0000 {
label = "oftree";
reg = <0xa0000 0x20000>;
};
kernel@c0000 {
label = "kernel";
reg = <0xc0000 0x400000>;
};
rootfs@4c0000 {
label = "rootfs";
reg = <0x4c0000 0x7800000>;
};
data@7cc0000 {
label = "data";
reg = <0x7cc0000 0x8340000>;
};
};
};
leds {
compatible = "gpio-leds";
user_led {
label = "user_led";
gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user_pb {
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
};
};
i2c@0 {
status = "okay";
};
};

379
arch/arm/boot/dts/sama5d3.dtsi
View File

@ -13,6 +13,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clk/at91.h>
/ {
model = "Atmel SAMA5D3 family SoC";
@ -56,6 +57,14 @@
reg = <0x20000000 0x8000000>;
};
clocks {
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <20000000>;
};
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@ -79,6 +88,8 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mci0_clk>;
clock-names = "mci_clk";
};
spi0: spi@f0004000 {
@ -92,6 +103,8 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
clocks = <&spi0_clk>;
clock-names = "spi_clk";
status = "disabled";
};
@ -101,6 +114,8 @@
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
clocks = <&ssc0_clk>;
clock-names = "pclk";
status = "disabled";
};
@ -108,6 +123,8 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf0010000 0x100>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb0_clk>;
clock-names = "t0_clk";
};
i2c0: i2c@f0014000 {
@ -121,6 +138,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi0_clk>;
status = "disabled";
};
@ -135,6 +153,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi1_clk>;
status = "disabled";
};
@ -144,6 +163,8 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
clocks = <&usart0_clk>;
clock-names = "usart";
status = "disabled";
};
@ -153,6 +174,8 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
clocks = <&usart1_clk>;
clock-names = "usart";
status = "disabled";
};
@ -174,6 +197,8 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mci1_clk>;
clock-names = "mci_clk";
};
spi1: spi@f8008000 {
@ -187,6 +212,8 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&spi1_clk>;
clock-names = "spi_clk";
status = "disabled";
};
@ -196,6 +223,8 @@
interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
clocks = <&ssc1_clk>;
clock-names = "pclk";
status = "disabled";
};
@ -219,6 +248,9 @@
&pinctrl_adc0_ad10
&pinctrl_adc0_ad11
>;
clocks = <&adc_clk>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channel-base = <0x50>;
atmel,adc-channels-used = <0xfff>;
atmel,adc-drdy-mask = <0x1000000>;
@ -274,6 +306,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi2_clk>;
status = "disabled";
};
@ -283,6 +316,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
clocks = <&usart2_clk>;
clock-names = "usart";
status = "disabled";
};
@ -292,6 +327,8 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
clocks = <&usart3_clk>;
clock-names = "usart";
status = "disabled";
};
@ -318,6 +355,8 @@
reg = <0xffffe600 0x200>;
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
clocks = <&dma0_clk>;
clock-names = "dma_clk";
};
dma1: dma-controller@ffffe800 {
@ -325,6 +364,8 @@
reg = <0xffffe800 0x200>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
clocks = <&dma1_clk>;
clock-names = "dma_clk";
};
ramc0: ramc@ffffea00 {
@ -338,6 +379,8 @@
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
clocks = <&dbgu_clk>;
clock-names = "usart";
status = "disabled";
};
@ -626,6 +669,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioA_clk>;
};
pioB: gpio@fffff400 {
@ -636,6 +680,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioB_clk>;
};
pioC: gpio@fffff600 {
@ -646,6 +691,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioC_clk>;
};
pioD: gpio@fffff800 {
@ -656,6 +702,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioD_clk>;
};
pioE: gpio@fffffa00 {
@ -666,12 +713,334 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioE_clk>;
};
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
compatible = "atmel,sama5d3-pmc";
reg = <0xfffffc00 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
clk32k: slck {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MOSCS>;
clocks = <&clk32k>;
};
plla: pllack {
compatible = "atmel,sama5d3-clk-pll";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_LOCKA>;
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <8000000 50000000>;
#atmel,pll-clk-output-range-cells = <4>;
atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
};
plladiv: plladivck {
compatible = "atmel,at91sam9x5-clk-plldiv";
#clock-cells = <0>;
clocks = <&plla>;
};
utmi: utmick {
compatible = "atmel,at91sam9x5-clk-utmi";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_LOCKU>;
clocks = <&main>;
};
mck: masterck {
compatible = "atmel,at91sam9x5-clk-master";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
atmel,clk-output-range = <0 166000000>;
atmel,clk-divisors = <1 2 4 3>;
};
usb: usbck {
compatible = "atmel,at91sam9x5-clk-usb";
#clock-cells = <0>;
clocks = <&plladiv>, <&utmi>;
};
prog: progck {
compatible = "atmel,at91sam9x5-clk-programmable";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
prog0: prog0 {
#clock-cells = <0>;
reg = <0>;
interrupts = <AT91_PMC_PCKRDY(0)>;
};
prog1: prog1 {
#clock-cells = <0>;
reg = <1>;
interrupts = <AT91_PMC_PCKRDY(1)>;
};
prog2: prog2 {
#clock-cells = <0>;
reg = <2>;
interrupts = <AT91_PMC_PCKRDY(2)>;
};
};
smd: smdclk {
compatible = "atmel,at91sam9x5-clk-smd";
#clock-cells = <0>;
clocks = <&plladiv>, <&utmi>;
};
systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
#size-cells = <0>;
ddrck: ddrck {
#clock-cells = <0>;
reg = <2>;
clocks = <&mck>;
};
smdck: smdck {
#clock-cells = <0>;
reg = <4>;
clocks = <&smd>;
};
uhpck: uhpck {
#clock-cells = <0>;
reg = <6>;
clocks = <&usb>;
};
udpck: udpck {
#clock-cells = <0>;
reg = <7>;
clocks = <&usb>;
};
pck0: pck0 {
#clock-cells = <0>;
reg = <8>;
clocks = <&prog0>;
};
pck1: pck1 {
#clock-cells = <0>;
reg = <9>;
clocks = <&prog1>;
};
pck2: pck2 {
#clock-cells = <0>;
reg = <10>;
clocks = <&prog2>;
};
};
periphck {
compatible = "atmel,at91sam9x5-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
dbgu_clk: dbgu_clk {
#clock-cells = <0>;
reg = <2>;
};
pioA_clk: pioA_clk {
#clock-cells = <0>;
reg = <6>;
};
pioB_clk: pioB_clk {
#clock-cells = <0>;
reg = <7>;
};
pioC_clk: pioC_clk {
#clock-cells = <0>;
reg = <8>;
};
pioD_clk: pioD_clk {
#clock-cells = <0>;
reg = <9>;
};
pioE_clk: pioE_clk {
#clock-cells = <0>;
reg = <10>;
};
usart0_clk: usart0_clk {
#clock-cells = <0>;
reg = <12>;
atmel,clk-output-range = <0 66000000>;
};
usart1_clk: usart1_clk {
#clock-cells = <0>;
reg = <13>;
atmel,clk-output-range = <0 66000000>;
};
usart2_clk: usart2_clk {
#clock-cells = <0>;
reg = <14>;
atmel,clk-output-range = <0 66000000>;
};
usart3_clk: usart3_clk {
#clock-cells = <0>;
reg = <15>;
atmel,clk-output-range = <0 66000000>;
};
twi0_clk: twi0_clk {
reg = <18>;
#clock-cells = <0>;
atmel,clk-output-range = <0 16625000>;
};
twi1_clk: twi1_clk {
#clock-cells = <0>;
reg = <19>;
atmel,clk-output-range = <0 16625000>;
};
twi2_clk: twi2_clk {
#clock-cells = <0>;
reg = <20>;
atmel,clk-output-range = <0 16625000>;
};
mci0_clk: mci0_clk {
#clock-cells = <0>;
reg = <21>;
};
mci1_clk: mci1_clk {
#clock-cells = <0>;
reg = <22>;
};
spi0_clk: spi0_clk {
#clock-cells = <0>;
reg = <24>;
atmel,clk-output-range = <0 133000000>;
};
spi1_clk: spi1_clk {
#clock-cells = <0>;
reg = <25>;
atmel,clk-output-range = <0 133000000>;
};
tcb0_clk: tcb0_clk {
#clock-cells = <0>;
reg = <26>;
atmel,clk-output-range = <0 133000000>;
};
pwm_clk: pwm_clk {
#clock-cells = <0>;
reg = <28>;
};
adc_clk: adc_clk {
#clock-cells = <0>;
reg = <29>;
atmel,clk-output-range = <0 66000000>;
};
dma0_clk: dma0_clk {
#clock-cells = <0>;
reg = <30>;
};
dma1_clk: dma1_clk {
#clock-cells = <0>;
reg = <31>;
};
uhphs_clk: uhphs_clk {
#clock-cells = <0>;
reg = <32>;
};
udphs_clk: udphs_clk {
#clock-cells = <0>;
reg = <33>;
};
isi_clk: isi_clk {
#clock-cells = <0>;
reg = <37>;
};
ssc0_clk: ssc0_clk {
#clock-cells = <0>;
reg = <38>;
atmel,clk-output-range = <0 66000000>;
};
ssc1_clk: ssc1_clk {
#clock-cells = <0>;
reg = <39>;
atmel,clk-output-range = <0 66000000>;
};
sha_clk: sha_clk {
#clock-cells = <0>;
reg = <42>;
};
aes_clk: aes_clk {
#clock-cells = <0>;
reg = <43>;
};
tdes_clk: tdes_clk {
#clock-cells = <0>;
reg = <44>;
};
trng_clk: trng_clk {
#clock-cells = <0>;
reg = <45>;
};
fuse_clk: fuse_clk {
#clock-cells = <0>;
reg = <48>;
};
};
};
rstc@fffffe00 {
@ -683,6 +1052,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&mck>;
};
watchdog@fffffe40 {
@ -705,6 +1075,8 @@
reg = <0x00500000 0x100000
0xf8030000 0x4000>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udphs_clk>, <&utmi>;
clock-names = "pclk", "hclk";
status = "disabled";
ep0 {
@ -817,6 +1189,9 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
<&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@ -824,6 +1199,8 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
clock-names = "usb_clk", "ehci_clk", "uhpck";
status = "disabled";
};

20
arch/arm/boot/dts/sama5d3_can.dtsi
View File

@ -32,12 +32,30 @@
};
pmc: pmc@fffffc00 {
periphck {
can0_clk: can0_clk {
#clock-cells = <0>;
reg = <40>;
atmel,clk-output-range = <0 66000000>;
};
can1_clk: can0_clk {
#clock-cells = <0>;
reg = <41>;
atmel,clk-output-range = <0 66000000>;
};
};
};
can0: can@f000c000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf000c000 0x300>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
clocks = <&can0_clk>;
clock-names = "can_clk";
status = "disabled";
};
@ -47,6 +65,8 @@
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
clocks = <&can1_clk>;
clock-names = "can_clk";
status = "disabled";
};
};

11
arch/arm/boot/dts/sama5d3_emac.dtsi
View File

@ -31,12 +31,23 @@
};
};
pmc: pmc@fffffc00 {
periphck {
macb1_clk: macb1_clk {
#clock-cells = <0>;
reg = <35>;
};
};
};
macb1: ethernet@f802c000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
clocks = <&macb1_clk>, <&macb1_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
};
};

11
arch/arm/boot/dts/sama5d3_gmac.dtsi
View File

@ -64,12 +64,23 @@
};
};
pmc: pmc@fffffc00 {
periphck {
macb0_clk: macb0_clk {
#clock-cells = <0>;
reg = <34>;
};
};
};
macb0: ethernet@f0028000 {
compatible = "cdns,pc302-gem", "cdns,gem";
reg = <0xf0028000 0x100>;
interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
clocks = <&macb0_clk>, <&macb0_clk>;
clock-names = "hclk", "pclk";
status = "disabled";
};
};

17
arch/arm/boot/dts/sama5d3_lcd.dtsi
View File

@ -50,6 +50,23 @@
};
};
};
pmc: pmc@fffffc00 {
periphck {
lcdc_clk: lcdc_clk {
#clock-cells = <0>;
reg = <36>;
};
};
systemck {
lcdck: lcdck {
#clock-cells = <0>;
reg = <3>;
clocks = <&mck>;
};
};
};
};
};
};

12
arch/arm/boot/dts/sama5d3_mci2.dtsi
View File

@ -9,6 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clk/at91.h>
/ {
ahb {
@ -30,6 +31,15 @@
};
};
pmc: pmc@fffffc00 {
periphck {
mci2_clk: mci2_clk {
#clock-cells = <0>;
reg = <23>;
};
};
};
mmc2: mmc@f8004000 {
compatible = "atmel,hsmci";
reg = <0xf8004000 0x600>;
@ -38,6 +48,8 @@
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
clocks = <&mci2_clk>;
clock-names = "mci_clk";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;

12
arch/arm/boot/dts/sama5d3_tcb1.dtsi
View File

@ -9,6 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clk/at91.h>
/ {
aliases {
@ -17,10 +18,21 @@
ahb {
apb {
pmc: pmc@fffffc00 {
periphck {
tcb1_clk: tcb1_clk {
#clock-cells = <0>;
reg = <27>;
};
};
};
tcb1: timer@f8014000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8014000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb1_clk>;
clock-names = "t0_clk";
};
};
};

21
arch/arm/boot/dts/sama5d3_uart.dtsi
View File

@ -9,6 +9,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clk/at91.h>
/ {
ahb {
@ -31,12 +32,30 @@
};
};
pmc: pmc@fffffc00 {
periphck {
uart0_clk: uart0_clk {
#clock-cells = <0>;
reg = <16>;
atmel,clk-output-range = <0 66000000>;
};
uart1_clk: uart1_clk {
#clock-cells = <0>;
reg = <17>;
atmel,clk-output-range = <0 66000000>;
};
};
};
uart0: serial@f0024000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf0024000 0x200>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&uart0_clk>;
clock-names = "usart";
status = "disabled";
};
@ -46,6 +65,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&uart1_clk>;
clock-names = "usart";
status = "disabled";
};
};

17
arch/arm/boot/dts/sama5d3xcm.dtsi
View File

@ -18,17 +18,6 @@
reg = <0x20000000 0x20000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
ahb {
apb {
spi0: spi@f0004000 {
@ -38,6 +27,12 @@
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
};
pmc: pmc@fffffc00 {
main: mainck {
clock-frequency = <12000000>;
};
};
};
nand0: nand@60000000 {

157
arch/arm/boot/dts/tegra114.dtsi
View File

@ -43,6 +43,7 @@
compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
apbdma: dma {
@ -81,6 +82,9 @@
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
resets = <&tegra_car 34>;
reset-names = "dma";
#dma-cells = <1>;
};
ahb: ahb {
@ -124,9 +128,12 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 8>;
status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTA>;
resets = <&tegra_car 6>;
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
uartb: serial@70006040 {
@ -134,9 +141,12 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 9>;
status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTB>;
resets = <&tegra_car 7>;
reset-names = "serial";
dmas = <&apbdma 9>, <&apbdma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
uartc: serial@70006200 {
@ -144,9 +154,12 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 10>;
status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTC>;
resets = <&tegra_car 55>;
reset-names = "serial";
dmas = <&apbdma 10>, <&apbdma 10>;
dma-names = "rx", "tx";
status = "disabled";
};
uartd: serial@70006300 {
@ -154,9 +167,12 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 19>;
status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTD>;
resets = <&tegra_car 65>;
reset-names = "serial";
dmas = <&apbdma 19>, <&apbdma 19>;
dma-names = "rx", "tx";
status = "disabled";
};
pwm: pwm {
@ -164,6 +180,8 @@
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car TEGRA114_CLK_PWM>;
resets = <&tegra_car 17>;
reset-names = "pwm";
status = "disabled";
};
@ -175,6 +193,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C1>;
clock-names = "div-clk";
resets = <&tegra_car 12>;
reset-names = "i2c";
dmas = <&apbdma 21>, <&apbdma 21>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -186,6 +208,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C2>;
clock-names = "div-clk";
resets = <&tegra_car 54>;
reset-names = "i2c";
dmas = <&apbdma 22>, <&apbdma 22>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -197,6 +223,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C3>;
clock-names = "div-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
dmas = <&apbdma 23>, <&apbdma 23>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -208,6 +238,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C4>;
clock-names = "div-clk";
resets = <&tegra_car 103>;
reset-names = "i2c";
dmas = <&apbdma 26>, <&apbdma 26>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -219,6 +253,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C5>;
clock-names = "div-clk";
resets = <&tegra_car 47>;
reset-names = "i2c";
dmas = <&apbdma 24>, <&apbdma 24>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -226,11 +264,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d400 0x200>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC1>;
clock-names = "spi";
resets = <&tegra_car 41>;
reset-names = "spi";
dmas = <&apbdma 15>, <&apbdma 15>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -238,11 +279,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC2>;
clock-names = "spi";
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -250,11 +294,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d800 0x200>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC3>;
clock-names = "spi";
resets = <&tegra_car 46>;
reset-names = "spi";
dmas = <&apbdma 17>, <&apbdma 17>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -262,11 +309,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC4>;
clock-names = "spi";
resets = <&tegra_car 68>;
reset-names = "spi";
dmas = <&apbdma 18>, <&apbdma 18>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -274,11 +324,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000dc00 0x200>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC5>;
clock-names = "spi";
resets = <&tegra_car 104>;
reset-names = "spi";
dmas = <&apbdma 27>, <&apbdma 27>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -286,11 +339,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000de00 0x200>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC6>;
clock-names = "spi";
resets = <&tegra_car 105>;
reset-names = "spi";
dmas = <&apbdma 28>, <&apbdma 28>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -306,6 +362,8 @@
reg = <0x7000e200 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_KBC>;
resets = <&tegra_car 36>;
reset-names = "kbc";
status = "disabled";
};
@ -333,26 +391,39 @@
<0x70080200 0x100>,
<0x70081000 0x200>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 1>, <&apbdma 2>,
<&apbdma 3>, <&apbdma 4>, <&apbdma 6>, <&apbdma 7>,
<&apbdma 12>, <&apbdma 13>, <&apbdma 14>,
<&apbdma 29>;
clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
<&tegra_car TEGRA114_CLK_APBIF>,
<&tegra_car TEGRA114_CLK_I2S0>,
<&tegra_car TEGRA114_CLK_I2S1>,
<&tegra_car TEGRA114_CLK_I2S2>,
<&tegra_car TEGRA114_CLK_I2S3>,
<&tegra_car TEGRA114_CLK_I2S4>,
<&tegra_car TEGRA114_CLK_DAM0>,
<&tegra_car TEGRA114_CLK_DAM1>,
<&tegra_car TEGRA114_CLK_DAM2>,
<&tegra_car TEGRA114_CLK_SPDIF_IN>,
<&tegra_car TEGRA114_CLK_AMX>,
<&tegra_car TEGRA114_CLK_ADX>;
clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
<&tegra_car TEGRA114_CLK_APBIF>;
clock-names = "d_audio", "apbif";
resets = <&tegra_car 106>, /* d_audio */
<&tegra_car 107>, /* apbif */
<&tegra_car 30>, /* i2s0 */
<&tegra_car 11>, /* i2s1 */
<&tegra_car 18>, /* i2s2 */
<&tegra_car 101>, /* i2s3 */
<&tegra_car 102>, /* i2s4 */
<&tegra_car 108>, /* dam0 */
<&tegra_car 109>, /* dam1 */
<&tegra_car 110>, /* dam2 */
<&tegra_car 10>, /* spdif */
<&tegra_car 153>, /* amx */
<&tegra_car 154>; /* adx */
reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
"spdif_in", "amx", "adx";
"spdif", "amx", "adx";
dmas = <&apbdma 1>, <&apbdma 1>,
<&apbdma 2>, <&apbdma 2>,
<&apbdma 3>, <&apbdma 3>,
<&apbdma 4>, <&apbdma 4>,
<&apbdma 6>, <&apbdma 6>,
<&apbdma 7>, <&apbdma 7>,
<&apbdma 12>, <&apbdma 12>,
<&apbdma 13>, <&apbdma 13>,
<&apbdma 14>, <&apbdma 14>,
<&apbdma 29>, <&apbdma 29>;
dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
"rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
"rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
"rx9", "tx9";
ranges;
#address-cells = <1>;
#size-cells = <1>;
@ -362,6 +433,8 @@
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
clocks = <&tegra_car TEGRA114_CLK_I2S0>;
resets = <&tegra_car 30>;
reset-names = "i2s";
status = "disabled";
};
@ -370,6 +443,8 @@
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
clocks = <&tegra_car TEGRA114_CLK_I2S1>;
resets = <&tegra_car 11>;
reset-names = "i2s";
status = "disabled";
};
@ -378,6 +453,8 @@
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
clocks = <&tegra_car TEGRA114_CLK_I2S2>;
resets = <&tegra_car 18>;
reset-names = "i2s";
status = "disabled";
};
@ -386,6 +463,8 @@
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
clocks = <&tegra_car TEGRA114_CLK_I2S3>;
resets = <&tegra_car 101>;
reset-names = "i2s";
status = "disabled";
};
@ -394,6 +473,8 @@
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
clocks = <&tegra_car TEGRA114_CLK_I2S4>;
resets = <&tegra_car 102>;
reset-names = "i2s";
status = "disabled";
};
};
@ -403,6 +484,8 @@
reg = <0x78000000 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
resets = <&tegra_car 14>;
reset-names = "sdhci";
status = "disable";
};
@ -411,6 +494,8 @@
reg = <0x78000200 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
resets = <&tegra_car 9>;
reset-names = "sdhci";
status = "disable";
};
@ -419,6 +504,8 @@
reg = <0x78000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
resets = <&tegra_car 69>;
reset-names = "sdhci";
status = "disable";
};
@ -427,6 +514,8 @@
reg = <0x78000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
resets = <&tegra_car 15>;
reset-names = "sdhci";
status = "disable";
};
@ -436,6 +525,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USBD>;
resets = <&tegra_car 22>;
reset-names = "usb";
nvidia,phy = <&phy1>;
status = "disabled";
};
@ -467,6 +558,8 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USB3>;
resets = <&tegra_car 59>;
reset-names = "usb";
nvidia,phy = <&phy3>;
status = "disabled";
};

2
arch/arm/boot/dts/tegra20-paz00.dts
View File

@ -280,6 +280,8 @@
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
};
i2c@7000d000 {

136
arch/arm/boot/dts/tegra20.dtsi
View File

@ -22,6 +22,8 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
@ -33,6 +35,8 @@
reg = <0x54040000 0x00040000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_MPE>;
resets = <&tegra_car 60>;
reset-names = "mpe";
};
vi {
@ -40,6 +44,8 @@
reg = <0x54080000 0x00040000>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_VI>;
resets = <&tegra_car 20>;
reset-names = "vi";
};
epp {
@ -47,6 +53,8 @@
reg = <0x540c0000 0x00040000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_EPP>;
resets = <&tegra_car 19>;
reset-names = "epp";
};
isp {
@ -54,6 +62,8 @@
reg = <0x54100000 0x00040000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_ISP>;
resets = <&tegra_car 23>;
reset-names = "isp";
};
gr2d {
@ -61,12 +71,16 @@
reg = <0x54140000 0x00040000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_GR2D>;
resets = <&tegra_car 21>;
reset-names = "2d";
};
gr3d {
compatible = "nvidia,tegra20-gr3d";
reg = <0x54180000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_GR3D>;
resets = <&tegra_car 24>;
reset-names = "3d";
};
dc@54200000 {
@ -75,7 +89,9 @@
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_DISP1>,
<&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp1", "parent";
clock-names = "dc", "parent";
resets = <&tegra_car 27>;
reset-names = "dc";
rgb {
status = "disabled";
@ -88,7 +104,9 @@
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_DISP2>,
<&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp2", "parent";
clock-names = "dc", "parent";
resets = <&tegra_car 26>;
reset-names = "dc";
rgb {
status = "disabled";
@ -102,6 +120,8 @@
clocks = <&tegra_car TEGRA20_CLK_HDMI>,
<&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
clock-names = "hdmi", "parent";
resets = <&tegra_car 51>;
reset-names = "hdmi";
status = "disabled";
};
@ -117,6 +137,8 @@
compatible = "nvidia,tegra20-dsi";
reg = <0x54300000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_DSI>;
resets = <&tegra_car 48>;
reset-names = "dsi";
status = "disabled";
};
};
@ -160,6 +182,7 @@
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
apbdma: dma {
@ -182,6 +205,9 @@
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
resets = <&tegra_car 34>;
reset-names = "dma";
#dma-cells = <1>;
};
ahb {
@ -222,8 +248,11 @@
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 12>;
clocks = <&tegra_car TEGRA20_CLK_AC97>;
resets = <&tegra_car 3>;
reset-names = "ac97";
dmas = <&apbdma 12>, <&apbdma 12>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -231,8 +260,11 @@
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 2>;
clocks = <&tegra_car TEGRA20_CLK_I2S1>;
resets = <&tegra_car 11>;
reset-names = "i2s";
dmas = <&apbdma 2>, <&apbdma 2>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -240,8 +272,11 @@
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car TEGRA20_CLK_I2S2>;
resets = <&tegra_car 18>;
reset-names = "i2s";
dmas = <&apbdma 1>, <&apbdma 1>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -257,8 +292,11 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car TEGRA20_CLK_UARTA>;
resets = <&tegra_car 6>;
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -267,8 +305,11 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car TEGRA20_CLK_UARTB>;
resets = <&tegra_car 7>;
reset-names = "serial";
dmas = <&apbdma 9>, <&apbdma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -277,8 +318,11 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car TEGRA20_CLK_UARTC>;
resets = <&tegra_car 55>;
reset-names = "serial";
dmas = <&apbdma 10>, <&apbdma 10>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -287,8 +331,11 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car TEGRA20_CLK_UARTD>;
resets = <&tegra_car 65>;
reset-names = "serial";
dmas = <&apbdma 19>, <&apbdma 19>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -297,8 +344,11 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car TEGRA20_CLK_UARTE>;
resets = <&tegra_car 66>;
reset-names = "serial";
dmas = <&apbdma 20>, <&apbdma 20>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -307,6 +357,8 @@
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car TEGRA20_CLK_PWM>;
resets = <&tegra_car 17>;
reset-names = "pwm";
status = "disabled";
};
@ -326,6 +378,10 @@
clocks = <&tegra_car TEGRA20_CLK_I2C1>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 12>;
reset-names = "i2c";
dmas = <&apbdma 21>, <&apbdma 21>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -333,10 +389,13 @@
compatible = "nvidia,tegra20-sflash";
reg = <0x7000c380 0x80>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 11>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SPI>;
resets = <&tegra_car 43>;
reset-names = "spi";
dmas = <&apbdma 11>, <&apbdma 11>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -349,6 +408,10 @@
clocks = <&tegra_car TEGRA20_CLK_I2C2>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 54>;
reset-names = "i2c";
dmas = <&apbdma 22>, <&apbdma 22>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -361,6 +424,10 @@
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
dmas = <&apbdma 23>, <&apbdma 23>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -373,6 +440,10 @@
clocks = <&tegra_car TEGRA20_CLK_DVC>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 47>;
reset-names = "i2c";
dmas = <&apbdma 24>, <&apbdma 24>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -380,10 +451,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d400 0x200>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC1>;
resets = <&tegra_car 41>;
reset-names = "spi";
dmas = <&apbdma 15>, <&apbdma 15>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -391,10 +465,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC2>;
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -402,10 +479,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d800 0x200>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC3>;
resets = <&tegra_car 46>;
reset-names = "spi";
dmas = <&apbdma 17>, <&apbdma 17>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -413,10 +493,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC4>;
resets = <&tegra_car 68>;
reset-names = "spi";
dmas = <&apbdma 18>, <&apbdma 18>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -425,6 +508,8 @@
reg = <0x7000e200 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_KBC>;
resets = <&tegra_car 36>;
reset-names = "kbc";
status = "disabled";
};
@ -478,9 +563,12 @@
clocks = <&tegra_car TEGRA20_CLK_PEX>,
<&tegra_car TEGRA20_CLK_AFI>,
<&tegra_car TEGRA20_CLK_PCIE_XCLK>,
<&tegra_car TEGRA20_CLK_PLL_E>;
clock-names = "pex", "afi", "pcie_xclk", "pll_e";
clock-names = "pex", "afi", "pll_e";
resets = <&tegra_car 70>,
<&tegra_car 72>,
<&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {
@ -517,6 +605,8 @@
phy_type = "utmi";
nvidia,has-legacy-mode;
clocks = <&tegra_car TEGRA20_CLK_USBD>;
resets = <&tegra_car 22>;
reset-names = "usb";
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
@ -548,6 +638,8 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA20_CLK_USB2>;
resets = <&tegra_car 58>;
reset-names = "usb";
nvidia,phy = <&phy2>;
status = "disabled";
};
@ -569,6 +661,8 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA20_CLK_USB3>;
resets = <&tegra_car 59>;
reset-names = "usb";
nvidia,phy = <&phy3>;
status = "disabled";
};
@ -597,6 +691,8 @@
reg = <0xc8000000 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
resets = <&tegra_car 14>;
reset-names = "sdhci";
status = "disabled";
};
@ -605,6 +701,8 @@
reg = <0xc8000200 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
resets = <&tegra_car 9>;
reset-names = "sdhci";
status = "disabled";
};
@ -613,6 +711,8 @@
reg = <0xc8000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
resets = <&tegra_car 69>;
reset-names = "sdhci";
status = "disabled";
};
@ -621,6 +721,8 @@
reg = <0xc8000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
resets = <&tegra_car 15>;
reset-names = "sdhci";
status = "disabled";
};

175
arch/arm/boot/dts/tegra30.dtsi
View File

@ -40,10 +40,13 @@
clocks = <&tegra_car TEGRA30_CLK_PCIE>,
<&tegra_car TEGRA30_CLK_AFI>,
<&tegra_car TEGRA30_CLK_PCIEX>,
<&tegra_car TEGRA30_CLK_PLL_E>,
<&tegra_car TEGRA30_CLK_CML0>;
clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
clock-names = "pex", "afi", "pll_e", "cml";
resets = <&tegra_car 70>,
<&tegra_car 72>,
<&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {
@ -92,6 +95,8 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
@ -103,6 +108,8 @@
reg = <0x54040000 0x00040000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_MPE>;
resets = <&tegra_car 60>;
reset-names = "mpe";
};
vi {
@ -110,6 +117,8 @@
reg = <0x54080000 0x00040000>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_VI>;
resets = <&tegra_car 20>;
reset-names = "vi";
};
epp {
@ -117,6 +126,8 @@
reg = <0x540c0000 0x00040000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_EPP>;
resets = <&tegra_car 19>;
reset-names = "epp";
};
isp {
@ -124,12 +135,16 @@
reg = <0x54100000 0x00040000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_ISP>;
resets = <&tegra_car 23>;
reset-names = "isp";
};
gr2d {
compatible = "nvidia,tegra30-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
resets = <&tegra_car 21>;
reset-names = "2d";
clocks = <&tegra_car TEGRA30_CLK_GR2D>;
};
@ -139,6 +154,9 @@
clocks = <&tegra_car TEGRA30_CLK_GR3D
&tegra_car TEGRA30_CLK_GR3D2>;
clock-names = "3d", "3d2";
resets = <&tegra_car 24>,
<&tegra_car 98>;
reset-names = "3d", "3d2";
};
dc@54200000 {
@ -147,7 +165,9 @@
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_DISP1>,
<&tegra_car TEGRA30_CLK_PLL_P>;
clock-names = "disp1", "parent";
clock-names = "dc", "parent";
resets = <&tegra_car 27>;
reset-names = "dc";
rgb {
status = "disabled";
@ -160,7 +180,9 @@
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_DISP2>,
<&tegra_car TEGRA30_CLK_PLL_P>;
clock-names = "disp2", "parent";
clock-names = "dc", "parent";
resets = <&tegra_car 26>;
reset-names = "dc";
rgb {
status = "disabled";
@ -174,6 +196,8 @@
clocks = <&tegra_car TEGRA30_CLK_HDMI>,
<&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
clock-names = "hdmi", "parent";
resets = <&tegra_car 51>;
reset-names = "hdmi";
status = "disabled";
};
@ -189,6 +213,8 @@
compatible = "nvidia,tegra30-dsi";
reg = <0x54300000 0x00040000>;
clocks = <&tegra_car TEGRA30_CLK_DSIA>;
resets = <&tegra_car 48>;
reset-names = "dsi";
status = "disabled";
};
};
@ -234,6 +260,7 @@
compatible = "nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
apbdma: dma {
@ -272,6 +299,9 @@
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
resets = <&tegra_car 34>;
reset-names = "dma";
#dma-cells = <1>;
};
ahb: ahb {
@ -315,8 +345,11 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car TEGRA30_CLK_UARTA>;
resets = <&tegra_car 6>;
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -325,8 +358,11 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car TEGRA30_CLK_UARTB>;
resets = <&tegra_car 7>;
reset-names = "serial";
dmas = <&apbdma 9>, <&apbdma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -335,8 +371,11 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car TEGRA30_CLK_UARTC>;
resets = <&tegra_car 55>;
reset-names = "serial";
dmas = <&apbdma 10>, <&apbdma 10>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -345,8 +384,11 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car TEGRA30_CLK_UARTD>;
resets = <&tegra_car 65>;
reset-names = "serial";
dmas = <&apbdma 19>, <&apbdma 19>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -355,8 +397,11 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car TEGRA30_CLK_UARTE>;
resets = <&tegra_car 66>;
reset-names = "serial";
dmas = <&apbdma 20>, <&apbdma 20>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -365,6 +410,8 @@
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car TEGRA30_CLK_PWM>;
resets = <&tegra_car 17>;
reset-names = "pwm";
status = "disabled";
};
@ -384,6 +431,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C1>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 12>;
reset-names = "i2c";
dmas = <&apbdma 21>, <&apbdma 21>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -396,6 +447,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C2>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 54>;
reset-names = "i2c";
dmas = <&apbdma 22>, <&apbdma 22>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -408,6 +463,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C3>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
dmas = <&apbdma 23>, <&apbdma 23>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -419,7 +478,11 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_I2C4>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
resets = <&tegra_car 103>;
reset-names = "i2c";
clock-names = "div-clk", "fast-clk";
dmas = <&apbdma 26>, <&apbdma 26>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -432,6 +495,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C5>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 47>;
reset-names = "i2c";
dmas = <&apbdma 24>, <&apbdma 24>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -439,10 +506,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d400 0x200>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC1>;
resets = <&tegra_car 41>;
reset-names = "spi";
dmas = <&apbdma 15>, <&apbdma 15>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -450,10 +520,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC2>;
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -461,10 +534,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d800 0x200>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC3>;
resets = <&tegra_car 46>;
reset-names = "spi";
dmas = <&apbdma 17>, <&apbdma 17>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -472,10 +548,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC4>;
resets = <&tegra_car 68>;
reset-names = "spi";
dmas = <&apbdma 18>, <&apbdma 18>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -483,10 +562,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000dc00 0x200>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC5>;
resets = <&tegra_car 104>;
reset-names = "spi";
dmas = <&apbdma 27>, <&apbdma 27>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -494,10 +576,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000de00 0x200>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC6>;
resets = <&tegra_car 106>;
reset-names = "spi";
dmas = <&apbdma 28>, <&apbdma 28>;
dma-names = "rx", "tx";
status = "disabled";
};
@ -506,6 +591,8 @@
reg = <0x7000e200 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_KBC>;
resets = <&tegra_car 36>;
reset-names = "kbc";
status = "disabled";
};
@ -540,21 +627,29 @@
reg = <0x70080000 0x200
0x70080200 0x100>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
<&tegra_car TEGRA30_CLK_APBIF>,
<&tegra_car TEGRA30_CLK_I2S0>,
<&tegra_car TEGRA30_CLK_I2S1>,
<&tegra_car TEGRA30_CLK_I2S2>,
<&tegra_car TEGRA30_CLK_I2S3>,
<&tegra_car TEGRA30_CLK_I2S4>,
<&tegra_car TEGRA30_CLK_DAM0>,
<&tegra_car TEGRA30_CLK_DAM1>,
<&tegra_car TEGRA30_CLK_DAM2>,
<&tegra_car TEGRA30_CLK_SPDIF_IN>;
clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
<&tegra_car TEGRA30_CLK_APBIF>;
clock-names = "d_audio", "apbif";
resets = <&tegra_car 106>, /* d_audio */
<&tegra_car 107>, /* apbif */
<&tegra_car 30>, /* i2s0 */
<&tegra_car 11>, /* i2s1 */
<&tegra_car 18>, /* i2s2 */
<&tegra_car 101>, /* i2s3 */
<&tegra_car 102>, /* i2s4 */
<&tegra_car 108>, /* dam0 */
<&tegra_car 109>, /* dam1 */
<&tegra_car 110>, /* dam2 */
<&tegra_car 10>; /* spdif */
reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
"spdif_in";
"spdif";
dmas = <&apbdma 1>, <&apbdma 1>,
<&apbdma 2>, <&apbdma 2>,
<&apbdma 3>, <&apbdma 3>,
<&apbdma 4>, <&apbdma 4>;
dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
"rx3", "tx3";
ranges;
#address-cells = <1>;
#size-cells = <1>;
@ -564,6 +659,8 @@
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
clocks = <&tegra_car TEGRA30_CLK_I2S0>;
resets = <&tegra_car 30>;
reset-names = "i2s";
status = "disabled";
};
@ -572,6 +669,8 @@
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
clocks = <&tegra_car TEGRA30_CLK_I2S1>;
resets = <&tegra_car 11>;
reset-names = "i2s";
status = "disabled";
};
@ -580,6 +679,8 @@
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
clocks = <&tegra_car TEGRA30_CLK_I2S2>;
resets = <&tegra_car 18>;
reset-names = "i2s";
status = "disabled";
};
@ -588,6 +689,8 @@
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
clocks = <&tegra_car TEGRA30_CLK_I2S3>;
resets = <&tegra_car 101>;
reset-names = "i2s";
status = "disabled";
};
@ -596,6 +699,8 @@
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
clocks = <&tegra_car TEGRA30_CLK_I2S4>;
resets = <&tegra_car 102>;
reset-names = "i2s";
status = "disabled";
};
};
@ -605,6 +710,8 @@
reg = <0x78000000 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
resets = <&tegra_car 14>;
reset-names = "sdhci";
status = "disabled";
};
@ -613,6 +720,8 @@
reg = <0x78000200 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
resets = <&tegra_car 9>;
reset-names = "sdhci";
status = "disabled";
};
@ -621,6 +730,8 @@
reg = <0x78000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
resets = <&tegra_car 69>;
reset-names = "sdhci";
status = "disabled";
};
@ -629,6 +740,8 @@
reg = <0x78000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
resets = <&tegra_car 15>;
reset-names = "sdhci";
status = "disabled";
};
@ -638,6 +751,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USBD>;
resets = <&tegra_car 22>;
reset-names = "usb";
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
@ -671,6 +786,8 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA30_CLK_USB2>;
resets = <&tegra_car 58>;
reset-names = "usb";
nvidia,phy = <&phy2>;
status = "disabled";
};
@ -692,6 +809,8 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB3>;
resets = <&tegra_car 59>;
reset-names = "usb";
nvidia,phy = <&phy3>;
status = "disabled";
};

1
arch/arm/configs/at91_dt_defconfig
View File

@ -22,7 +22,6 @@ CONFIG_SOC_AT91SAM9X5=y
CONFIG_SOC_AT91SAM9N12=y
CONFIG_MACH_AT91RM9200_DT=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set

1
arch/arm/configs/at91rm9200_defconfig
View File

@ -31,7 +31,6 @@ CONFIG_MACH_YL9200=y
CONFIG_MACH_CPUAT91=y
CONFIG_MACH_ECO920=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=100
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y

2
arch/arm/configs/at91sam9260_9g20_defconfig
View File

@ -15,7 +15,6 @@ CONFIG_MACH_AT91SAM9260EK=y
CONFIG_MACH_CAM60=y
CONFIG_MACH_SAM9_L9260=y
CONFIG_MACH_AFEB9260=y
CONFIG_MACH_QIL_A9260=y
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_MACH_AT91SAM9G20EK=y
@ -28,7 +27,6 @@ CONFIG_MACH_PCONTROL_G20=y
CONFIG_MACH_GSIA18S=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y

1
arch/arm/configs/at91sam9261_9g10_defconfig
View File

@ -18,7 +18,6 @@ CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9261=y
CONFIG_MACH_AT91SAM9261EK=y
CONFIG_MACH_AT91SAM9G10EK=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set

1
arch/arm/configs/at91sam9g45_defconfig
View File

@ -18,7 +18,6 @@ CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set

1
arch/arm/configs/at91sam9rl_defconfig
View File

@ -13,7 +13,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9RL=y
CONFIG_MACH_AT91SAM9RLEK=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0

1
arch/arm/configs/sama5_defconfig
View File

@ -20,7 +20,6 @@ CONFIG_ARCH_AT91=y
CONFIG_SOC_SAM_V7=y
CONFIG_SOC_SAMA5D3=y
CONFIG_MACH_SAMA5_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_UACCESS_WITH_MEMCPY=y

50
arch/arm/mach-at91/Kconfig
View File

@ -1,15 +1,33 @@
if ARCH_AT91
config HAVE_AT91_UTMI
bool
config HAVE_AT91_USB_CLK
bool
config HAVE_AT91_DBGU0
bool
config HAVE_AT91_DBGU1
bool
config AT91_USE_OLD_CLK
bool
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
config COMMON_CLK_AT91
bool
default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
select COMMON_CLK
config OLD_CLK_AT91
bool
default AT91_PMC_UNIT && AT91_USE_OLD_CLK
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
@ -21,6 +39,9 @@ config AT91_SAM9G45_RESET
config AT91_SAM9_TIME
bool
config HAVE_AT91_SMD
bool
config SOC_AT91SAM9
bool
select AT91_SAM9_TIME
@ -61,10 +82,12 @@ comment "Atmel AT91 Processor"
if SOC_SAM_V7
config SOC_SAMA5D3
bool "SAMA5D3 family"
depends on SOC_SAM_V7
select SOC_SAMA5
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU1
select HAVE_AT91_UTMI
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's SAMA5D3 family SoC.
This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
@ -78,11 +101,15 @@ config SOC_AT91RM9200
select HAVE_AT91_DBGU0
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
select HAVE_AT91_DBGU0
select SOC_AT91SAM9
select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
@ -92,6 +119,8 @@ config SOC_AT91SAM9261
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
@ -100,18 +129,25 @@ config SOC_AT91SAM9263
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
config SOC_AT91SAM9RL
bool "AT91SAM9RL"
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
select AT91_USE_OLD_CLK
select HAVE_AT91_UTMI
config SOC_AT91SAM9G45
bool "AT91SAM9G45 or AT91SAM9M10 families"
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
select AT91_USE_OLD_CLK
select HAVE_AT91_UTMI
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
@ -121,6 +157,10 @@ config SOC_AT91SAM9X5
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
select AT91_USE_OLD_CLK
select HAVE_AT91_UTMI
select HAVE_AT91_SMD
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
This means that your SAM9 name finishes with a '5' (except if it is
@ -133,6 +173,8 @@ config SOC_AT91SAM9N12
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
@ -172,12 +214,6 @@ config MACH_SAMA5_DT
comment "AT91 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
bool "Programmable Clocks"
help
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
config AT91_SLOW_CLOCK
bool "Suspend-to-RAM disables main oscillator"
depends on SUSPEND

12
arch/arm/mach-at91/Kconfig.non_dt
View File

@ -12,26 +12,32 @@ config ARCH_AT91_NONE
config ARCH_AT91RM9200
bool "AT91RM9200"
select SOC_AT91RM9200
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
select SOC_AT91SAM9260
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
select SOC_AT91SAM9261
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9263
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
select AT91_USE_OLD_CLK
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
select AT91_USE_OLD_CLK
config ARCH_AT91X40
bool "AT91x40"
@ -176,12 +182,6 @@ config MACH_AFEB9260
<svn://194.85.238.22/home/users/george/svn/arm9eb>
<http://groups.google.com/group/arm9fpga-evolution-board>
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
config MACH_CPU9260
bool "Eukrea CPU9260 board"
help

3
arch/arm/mach-at91/Makefile
View File

@ -7,7 +7,7 @@ obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
obj-$(CONFIG_OLD_CLK_AT91) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o
@ -52,7 +52,6 @@ obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o

2
arch/arm/mach-at91/at91rm9200.c
View File

@ -12,13 +12,13 @@
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91rm9200.h>
#include <mach/at91_pmc.h>
#include <mach/at91_st.h>
#include <mach/cpu.h>

2
arch/arm/mach-at91/at91sam9260.c
View File

@ -11,6 +11,7 @@
*/
#include <linux/module.h>
#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@ -20,7 +21,6 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"

2
arch/arm/mach-at91/at91sam9261.c
View File

@ -11,6 +11,7 @@
*/
#include <linux/module.h>
#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@ -19,7 +20,6 @@
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91sam9261.h>
#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"

2
arch/arm/mach-at91/at91sam9263.c
View File

@ -11,6 +11,7 @@
*/
#include <linux/module.h>
#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@ -18,7 +19,6 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9263.h>
#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"

14
arch/arm/mach-at91/at91sam926x_time.c
View File

@ -39,6 +39,7 @@
static u32 pit_cycle; /* write-once */
static u32 pit_cnt; /* access only w/system irq blocked */
static void __iomem *pit_base_addr __read_mostly;
static struct clk *mck;
static inline unsigned int pit_read(unsigned int reg_offset)
{
@ -195,10 +196,14 @@ static int __init of_at91sam926x_pit_init(void)
if (!pit_base_addr)
goto node_err;
mck = of_clk_get(np, 0);
/* Get the interrupts property */
ret = irq_of_parse_and_map(np, 0);
if (!ret) {
pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
if (!IS_ERR(mck))
clk_put(mck);
goto ioremap_err;
}
at91sam926x_pit_irq.irq = ret;
@ -230,6 +235,8 @@ void __init at91sam926x_pit_init(void)
unsigned bits;
int ret;
mck = ERR_PTR(-ENOENT);
/* For device tree enabled device: initialize here */
of_at91sam926x_pit_init();
@ -237,7 +244,12 @@ void __init at91sam926x_pit_init(void)
* Use our actual MCK to figure out how many MCK/16 ticks per
* 1/HZ period (instead of a compile-time constant LATCH).
*/
pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
if (IS_ERR(mck))
mck = clk_get(NULL, "mck");
if (IS_ERR(mck))
panic("AT91: PIT: Unable to get mck clk\n");
pit_rate = clk_get_rate(mck) / 16;
pit_cycle = (pit_rate + HZ/2) / HZ;
WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);

2
arch/arm/mach-at91/at91sam9g45.c
View File

@ -12,13 +12,13 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "at91_aic.h"

2
arch/arm/mach-at91/at91sam9n12.c
View File

@ -8,12 +8,12 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at91sam9n12.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "board.h"

2
arch/arm/mach-at91/at91sam9rl.c
View File

@ -10,6 +10,7 @@
*/
#include <linux/module.h>
#include <linux/clk/at91_pmc.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
@ -19,7 +20,6 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
#include <mach/at91_pmc.h>
#include "at91_aic.h"
#include "at91_rstc.h"

2
arch/arm/mach-at91/at91sam9x5.c
View File

@ -8,12 +8,12 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/at91sam9x5.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "board.h"

10
arch/arm/mach-at91/board-dt-sama5.c
View File

@ -16,6 +16,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/clk-provider.h>
#include <asm/setup.h>
#include <asm/irq.h>
@ -26,6 +27,13 @@
#include "at91_aic.h"
#include "generic.h"
static void __init sama5_dt_timer_init(void)
{
#if defined(CONFIG_COMMON_CLK)
of_clk_init(NULL);
#endif
at91sam926x_pit_init();
}
static const struct of_device_id irq_of_match[] __initconst = {
@ -72,7 +80,7 @@ static const char *sama5_dt_board_compat[] __initdata = {
DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
/* Maintainer: Atmel */
.init_time = at91sam926x_pit_init,
.init_time = sama5_dt_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic5_handle_irq,
.init_early = at91_dt_initialize,

266
arch/arm/mach-at91/board-qil-a9260.c
View File

@ -1,266 +0,0 @@
/*
* linux/arch/arm/mach-at91/board-qil-a9260.c
*
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
* Copyright (C) 2007 Calao-systems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/clk.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/at91sam9_smc.h>
#include "at91_aic.h"
#include "at91_shdwc.h"
#include "board.h"
#include "sam9_smc.h"
#include "generic.h"
static void __init ek_init_early(void)
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
}
/*
* USB Host port
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
.vbus_pin = {-EINVAL, -EINVAL},
.overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
* USB Device port
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
/*
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
#if defined(CONFIG_RTC_DRV_M41T94)
{ /* M41T94 RTC */
.modalias = "m41t94",
.chip_select = 0,
.max_speed_hz = 1 * 1000 * 1000,
.bus_num = 0,
}
#endif
};
/*
* MACB Ethernet device
*/
static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA31,
.is_rmii = 1,
};
/*
* NAND flash
*/
static struct mtd_partition __initdata ek_nand_partition[] = {
{
.name = "Uboot & Kernel",
.offset = 0,
.size = SZ_16M,
},
{
.name = "Root FS",
.offset = MTDPART_OFS_NXTBLK,
.size = 120 * SZ_1M,
},
{
.name = "FS",
.offset = MTDPART_OFS_NXTBLK,
.size = 120 * SZ_1M,
},
};
static struct atmel_nand_data __initdata ek_nand_data = {
.ale = 21,
.cle = 22,
.det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
.ecc_mode = NAND_ECC_SOFT,
.on_flash_bbt = 1,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
static struct sam9_smc_config __initdata ek_nand_smc_config = {
.ncs_read_setup = 0,
.nrd_setup = 1,
.ncs_write_setup = 0,
.nwe_setup = 1,
.ncs_read_pulse = 3,
.nrd_pulse = 3,
.ncs_write_pulse = 3,
.nwe_pulse = 3,
.read_cycle = 5,
.write_cycle = 5,
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
.tdf_cycles = 2,
};
static void __init ek_add_device_nand(void)
{
/* configure chip-select 3 (NAND) */
sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
/*
* MCI (SD/MMC)
*/
static struct mci_platform_data __initdata ek_mci0_data = {
.slot[0] = {
.bus_width = 4,
.detect_pin = -EINVAL,
.wp_pin = -EINVAL,
},
};
/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button ek_buttons[] = {
{ /* USER PUSH BUTTON */
.code = KEY_ENTER,
.gpio = AT91_PIN_PB10,
.active_low = 1,
.desc = "user_pb",
.wakeup = 1,
}
};
static struct gpio_keys_platform_data ek_button_data = {
.buttons = ek_buttons,
.nbuttons = ARRAY_SIZE(ek_buttons),
};
static struct platform_device ek_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &ek_button_data,
}
};
static void __init ek_add_device_buttons(void)
{
at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
at91_set_deglitch(AT91_PIN_PB10, 1);
platform_device_register(&ek_button_device);
}
#else
static void __init ek_add_device_buttons(void) {}
#endif
/*
* LEDs
*/
static struct gpio_led ek_leds[] = {
{ /* user_led (green) */
.name = "user_led",
.gpio = AT91_PIN_PB21,
.active_low = 0,
.default_trigger = "heartbeat",
}
};
static void __init ek_board_init(void)
{
/* Serial */
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* USB Device */
at91_add_device_udc(&ek_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
/* NAND */
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(NULL, 0);
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
at91_add_device_mci(0, &ek_mci0_data);
/* Push Buttons */
ek_add_device_buttons();
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* shutdown controller, wakeup button (5 msec low) */
at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
| AT91_SHDW_RTTWKEN);
}
MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
/* Maintainer: calao-systems */
.init_time = at91sam926x_pit_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = ek_init_early,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

13
arch/arm/mach-at91/clock.c
View File

@ -24,9 +24,9 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include <asm/proc-fns.h>
@ -330,8 +330,6 @@ EXPORT_SYMBOL(clk_get_rate);
/*------------------------------------------------------------------------*/
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
/*
* For now, only the programmable clocks support reparenting (MCK could
* do this too, with care) or rate changing (the PLLs could do this too,
@ -459,8 +457,6 @@ static void __init init_programmable_clock(struct clk *clk)
clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
}
#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
/*------------------------------------------------------------------------*/
#ifdef CONFIG_DEBUG_FS
@ -577,12 +573,10 @@ int __init clk_register(struct clk *clk)
clk->parent = &mck;
clk->mode = pmc_sys_mode;
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
else if (clk_is_programmable(clk)) {
clk->mode = pmc_sys_mode;
init_programmable_clock(clk);
}
#endif
at91_clk_add(clk);
@ -884,6 +878,11 @@ static int __init at91_pmc_init(unsigned long main_clock)
#if defined(CONFIG_OF)
static struct of_device_id pmc_ids[] = {
{ .compatible = "atmel,at91rm9200-pmc" },
{ .compatible = "atmel,at91sam9260-pmc" },
{ .compatible = "atmel,at91sam9g45-pmc" },
{ .compatible = "atmel,at91sam9n12-pmc" },
{ .compatible = "atmel,at91sam9x5-pmc" },
{ .compatible = "atmel,sama5d3-pmc" },
{ /*sentinel*/ }
};

3
arch/arm/mach-at91/generic.h
View File

@ -46,11 +46,12 @@ extern void at91sam926x_pit_init(void);
extern void at91x40_timer_init(void);
/* Clocks */
#ifdef CONFIG_AT91_PMC_UNIT
#ifdef CONFIG_OLD_CLK_AT91
extern int __init at91_clock_init(unsigned long main_clock);
extern int __init at91_dt_clock_init(void);
#else
static int inline at91_clock_init(unsigned long main_clock) { return 0; }
static int inline at91_dt_clock_init(void) { return 0; }
#endif
struct device;

5
arch/arm/mach-at91/pm.c
View File

@ -19,13 +19,13 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "at91_aic.h"
@ -155,9 +155,6 @@ static int at91_pm_verify_clocks(void)
}
}
if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS))
return 1;
/* PCK0..PCK3 must be disabled, or configured to use clk32k */
for (i = 0; i < 4; i++) {
u32 css;

2
arch/arm/mach-at91/pm_slowclock.S
View File

@ -13,8 +13,8 @@
*/
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include <mach/hardware.h>
#include <mach/at91_pmc.h>
#include <mach/at91_ramc.h>

344
arch/arm/mach-at91/sama5d3.c
View File

@ -9,359 +9,18 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/sama5d3.h>
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
#include "soc.h"
#include "generic.h"
#include "clock.h"
#include "sam9_smc.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
/*
* The peripheral clocks.
*/
static struct clk pioA_clk = {
.name = "pioA_clk",
.pid = SAMA5D3_ID_PIOA,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioB_clk = {
.name = "pioB_clk",
.pid = SAMA5D3_ID_PIOB,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioC_clk = {
.name = "pioC_clk",
.pid = SAMA5D3_ID_PIOC,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioD_clk = {
.name = "pioD_clk",
.pid = SAMA5D3_ID_PIOD,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk pioE_clk = {
.name = "pioE_clk",
.pid = SAMA5D3_ID_PIOE,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pid = SAMA5D3_ID_USART0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk usart1_clk = {
.name = "usart1_clk",
.pid = SAMA5D3_ID_USART1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk usart2_clk = {
.name = "usart2_clk",
.pid = SAMA5D3_ID_USART2,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk usart3_clk = {
.name = "usart3_clk",
.pid = SAMA5D3_ID_USART3,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk uart0_clk = {
.name = "uart0_clk",
.pid = SAMA5D3_ID_UART0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk uart1_clk = {
.name = "uart1_clk",
.pid = SAMA5D3_ID_UART1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk twi0_clk = {
.name = "twi0_clk",
.pid = SAMA5D3_ID_TWI0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV8,
};
static struct clk twi1_clk = {
.name = "twi1_clk",
.pid = SAMA5D3_ID_TWI1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV8,
};
static struct clk twi2_clk = {
.name = "twi2_clk",
.pid = SAMA5D3_ID_TWI2,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV8,
};
static struct clk mmc0_clk = {
.name = "mci0_clk",
.pid = SAMA5D3_ID_HSMCI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc1_clk = {
.name = "mci1_clk",
.pid = SAMA5D3_ID_HSMCI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk mmc2_clk = {
.name = "mci2_clk",
.pid = SAMA5D3_ID_HSMCI2,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi0_clk = {
.name = "spi0_clk",
.pid = SAMA5D3_ID_SPI0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk spi1_clk = {
.name = "spi1_clk",
.pid = SAMA5D3_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tcb0_clk = {
.name = "tcb0_clk",
.pid = SAMA5D3_ID_TC0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk tcb1_clk = {
.name = "tcb1_clk",
.pid = SAMA5D3_ID_TC1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk adc_clk = {
.name = "adc_clk",
.pid = SAMA5D3_ID_ADC,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk adc_op_clk = {
.name = "adc_op_clk",
.type = CLK_TYPE_PERIPHERAL,
.rate_hz = 5000000,
};
static struct clk dma0_clk = {
.name = "dma0_clk",
.pid = SAMA5D3_ID_DMA0,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk dma1_clk = {
.name = "dma1_clk",
.pid = SAMA5D3_ID_DMA1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk uhphs_clk = {
.name = "uhphs",
.pid = SAMA5D3_ID_UHPHS,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk udphs_clk = {
.name = "udphs_clk",
.pid = SAMA5D3_ID_UDPHS,
.type = CLK_TYPE_PERIPHERAL,
};
/* gmac only for sama5d33, sama5d34, sama5d35 */
static struct clk macb0_clk = {
.name = "macb0_clk",
.pid = SAMA5D3_ID_GMAC,
.type = CLK_TYPE_PERIPHERAL,
};
/* emac only for sama5d31, sama5d35 */
static struct clk macb1_clk = {
.name = "macb1_clk",
.pid = SAMA5D3_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
/* lcd only for sama5d31, sama5d33, sama5d34 */
static struct clk lcdc_clk = {
.name = "lcdc_clk",
.pid = SAMA5D3_ID_LCDC,
.type = CLK_TYPE_PERIPHERAL,
};
/* isi only for sama5d33, sama5d35 */
static struct clk isi_clk = {
.name = "isi_clk",
.pid = SAMA5D3_ID_ISI,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk can0_clk = {
.name = "can0_clk",
.pid = SAMA5D3_ID_CAN0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk can1_clk = {
.name = "can1_clk",
.pid = SAMA5D3_ID_CAN1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk ssc0_clk = {
.name = "ssc0_clk",
.pid = SAMA5D3_ID_SSC0,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk ssc1_clk = {
.name = "ssc1_clk",
.pid = SAMA5D3_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV2,
};
static struct clk sha_clk = {
.name = "sha_clk",
.pid = SAMA5D3_ID_SHA,
.type = CLK_TYPE_PERIPHERAL,
.div = AT91_PMC_PCR_DIV8,
};
static struct clk aes_clk = {
.name = "aes_clk",
.pid = SAMA5D3_ID_AES,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tdes_clk = {
.name = "tdes_clk",
.pid = SAMA5D3_ID_TDES,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
&pioC_clk,
&pioD_clk,
&pioE_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
&usart3_clk,
&uart0_clk,
&uart1_clk,
&twi0_clk,
&twi1_clk,
&twi2_clk,
&mmc0_clk,
&mmc1_clk,
&mmc2_clk,
&spi0_clk,
&spi1_clk,
&tcb0_clk,
&tcb1_clk,
&adc_clk,
&adc_op_clk,
&dma0_clk,
&dma1_clk,
&uhphs_clk,
&udphs_clk,
&macb0_clk,
&macb1_clk,
&lcdc_clk,
&isi_clk,
&can0_clk,
&can1_clk,
&ssc0_clk,
&ssc1_clk,
&sha_clk,
&aes_clk,
&tdes_clk,
};
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 1,
};
static struct clk pck2 = {
.name = "pck2",
.pmc_mask = AT91_PMC_PCK2,
.type = CLK_TYPE_PROGRAMMABLE,
.id = 2,
};
static struct clk_lookup periph_clocks_lookups[] = {
/* lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk),
CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk),
CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk),
CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk),
CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk),
CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk),
CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk),
CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk),
CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk),
CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk),
CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk),
CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk),
CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk),
CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk),
CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk),
CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk),
CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk),
};
static void __init sama5d3_register_clocks(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
clk_register(periph_clocks[i]);
clkdev_add_table(periph_clocks_lookups,
ARRAY_SIZE(periph_clocks_lookups));
clk_register(&pck0);
clk_register(&pck1);
clk_register(&pck2);
}
/* --------------------------------------------------------------------
* AT91SAM9x5 processor initialization
* -------------------------------------------------------------------- */
@ -378,6 +37,5 @@ static void __init sama5d3_initialize(void)
AT91_SOC_START(sama5d3)
.map_io = sama5d3_map_io,
.register_clocks = sama5d3_register_clocks,
.init = sama5d3_initialize,
AT91_SOC_END

8
arch/arm/mach-at91/setup.c
View File

@ -11,6 +11,7 @@
#include <linux/pm.h>
#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
#include <linux/clk/at91_pmc.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
@ -18,7 +19,6 @@
#include <mach/hardware.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91_pmc.h>
#include "at91_shdwc.h"
#include "soc.h"
@ -491,7 +491,8 @@ void __init at91rm9200_dt_initialize(void)
at91_dt_clock_init();
/* Register the processor-specific clocks */
at91_boot_soc.register_clocks();
if (at91_boot_soc.register_clocks)
at91_boot_soc.register_clocks();
at91_boot_soc.init();
}
@ -506,7 +507,8 @@ void __init at91_dt_initialize(void)
at91_dt_clock_init();
/* Register the processor-specific clocks */
at91_boot_soc.register_clocks();
if (at91_boot_soc.register_clocks)
at91_boot_soc.register_clocks();
if (at91_boot_soc.init)
at91_boot_soc.init();

15
arch/arm/mach-dove/common.c
View File

@ -162,7 +162,7 @@ void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
/*****************************************************************************
* SoC RTC
****************************************************************************/
void __init dove_rtc_init(void)
static void __init dove_rtc_init(void)
{
orion_rtc_init(DOVE_RTC_PHYS_BASE, IRQ_DOVE_RTC);
}
@ -256,19 +256,10 @@ void __init dove_timer_init(void)
IRQ_DOVE_BRIDGE, dove_tclk);
}
/*****************************************************************************
* Cryptographic Engines and Security Accelerator (CESA)
****************************************************************************/
void __init dove_crypto_init(void)
{
orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE,
DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO);
}
/*****************************************************************************
* XOR 0
****************************************************************************/
void __init dove_xor0_init(void)
static void __init dove_xor0_init(void)
{
orion_xor0_init(DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01);
@ -277,7 +268,7 @@ void __init dove_xor0_init(void)
/*****************************************************************************
* XOR 1
****************************************************************************/
void __init dove_xor1_init(void)
static void __init dove_xor1_init(void)
{
orion_xor1_init(DOVE_XOR1_PHYS_BASE, DOVE_XOR1_HIGH_PHYS_BASE,
IRQ_DOVE_XOR_10, IRQ_DOVE_XOR_11);

4
arch/arm/mach-exynos/Kconfig
View File

@ -24,6 +24,7 @@ config ARCH_EXYNOS4
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PM_GENERIC_DOMAINS if PM
select S5P_DEV_MFC
help
Samsung EXYNOS4 SoCs based systems
@ -48,7 +49,6 @@ config CPU_EXYNOS4210
select ARCH_HAS_BANDGAP
select ARM_CPU_SUSPEND if PM
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
@ -61,7 +61,6 @@ config SOC_EXYNOS4212
depends on ARCH_EXYNOS4
select ARCH_HAS_BANDGAP
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
@ -74,7 +73,6 @@ config SOC_EXYNOS4412
depends on ARCH_EXYNOS4
select ARCH_HAS_BANDGAP
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4412 SoC support

8
arch/arm/mach-exynos/common.c
View File

@ -23,6 +23,7 @@
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/pm_domain.h>
#include <linux/export.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
@ -37,14 +38,13 @@
#include <asm/mach/irq.h>
#include <asm/cacheflush.h>
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
#include "common.h"
#include "regs-pmu.h"
#define L2_AUX_VAL 0x7C470001
#define L2_AUX_MASK 0xC200ffff
@ -309,7 +309,7 @@ void __init exynos_init_late(void)
/* to be supported later */
return;
exynos_pm_late_initcall();
pm_genpd_poweroff_unused();
}
static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,

6
arch/arm/mach-exynos/common.h
View File

@ -26,12 +26,6 @@ void exynos_init_late(void);
void exynos_firmware_init(void);
#ifdef CONFIG_PM_GENERIC_DOMAINS
int exynos_pm_late_initcall(void);
#else
static inline int exynos_pm_late_initcall(void) { return 0; }
#endif
extern struct smp_operations exynos_smp_ops;
extern void exynos_cpu_die(unsigned int cpu);

25
arch/arm/mach-exynos/cpuidle.c
View File

@ -22,13 +22,15 @@
#include <asm/suspend.h>
#include <asm/unified.h>
#include <asm/cpuidle.h>
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <mach/pm-core.h>
#include <mach/map.h>
#include "common.h"
#include "regs-pmu.h"
#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
@ -39,6 +41,25 @@
#define S5P_CHECK_AFTR 0xFCBA0D10
#define EXYNOS5_PWR_CTRL1 (S5P_VA_CMU + 0x01020)
#define EXYNOS5_PWR_CTRL2 (S5P_VA_CMU + 0x01024)
#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28)
#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16)
#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9)
#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8)
#define PWR_CTRL1_USE_CORE1_WFE (1 << 5)
#define PWR_CTRL1_USE_CORE0_WFE (1 << 4)
#define PWR_CTRL1_USE_CORE1_WFI (1 << 1)
#define PWR_CTRL1_USE_CORE0_WFI (1 << 0)
#define PWR_CTRL2_DIV2_UP_EN (1 << 25)
#define PWR_CTRL2_DIV1_UP_EN (1 << 24)
#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16)
#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8)
#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4)
#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0)
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);

2
arch/arm/mach-exynos/hotplug.c
View File

@ -19,10 +19,10 @@
#include <asm/cp15.h>
#include <asm/smp_plat.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
#include "common.h"
#include "regs-pmu.h"
static inline void cpu_enter_lowpower_a9(void)
{

5
arch/arm/mach-exynos/include/mach/pm-core.h
View File

@ -19,7 +19,10 @@
#define __ASM_ARCH_PM_CORE_H __FILE__
#include <linux/of.h>
#include <mach/regs-pmu.h>
#include <mach/map.h>
#define S5P_EINT_WAKEUP_MASK (S5P_VA_PMU + 0x0604)
#define S5P_WAKEUP_MASK (S5P_VA_PMU + 0x0608)
#ifdef CONFIG_PINCTRL_EXYNOS
extern u32 exynos_get_eint_wake_mask(void);

372
arch/arm/mach-exynos/include/mach/regs-clock.h
View File

@ -1,372 +0,0 @@
/* linux/arch/arm/mach-exynos4/include/mach/regs-clock.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - Clock register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
#include <plat/cpu.h>
#include <mach/map.h>
#define EXYNOS_CLKREG(x) (S5P_VA_CMU + (x))
#define EXYNOS4_CLKDIV_LEFTBUS EXYNOS_CLKREG(0x04500)
#define EXYNOS4_CLKDIV_STAT_LEFTBUS EXYNOS_CLKREG(0x04600)
#define EXYNOS4_CLKGATE_IP_LEFTBUS EXYNOS_CLKREG(0x04800)
#define EXYNOS4_CLKDIV_RIGHTBUS EXYNOS_CLKREG(0x08500)
#define EXYNOS4_CLKDIV_STAT_RIGHTBUS EXYNOS_CLKREG(0x08600)
#define EXYNOS4_CLKGATE_IP_RIGHTBUS EXYNOS_CLKREG(0x08800)
#define EXYNOS4_EPLL_LOCK EXYNOS_CLKREG(0x0C010)
#define EXYNOS4_VPLL_LOCK EXYNOS_CLKREG(0x0C020)
#define EXYNOS4_EPLL_CON0 EXYNOS_CLKREG(0x0C110)
#define EXYNOS4_EPLL_CON1 EXYNOS_CLKREG(0x0C114)
#define EXYNOS4_VPLL_CON0 EXYNOS_CLKREG(0x0C120)
#define EXYNOS4_VPLL_CON1 EXYNOS_CLKREG(0x0C124)
#define EXYNOS4_CLKSRC_TOP0 EXYNOS_CLKREG(0x0C210)
#define EXYNOS4_CLKSRC_TOP1 EXYNOS_CLKREG(0x0C214)
#define EXYNOS4_CLKSRC_CAM EXYNOS_CLKREG(0x0C220)
#define EXYNOS4_CLKSRC_TV EXYNOS_CLKREG(0x0C224)
#define EXYNOS4_CLKSRC_MFC EXYNOS_CLKREG(0x0C228)
#define EXYNOS4_CLKSRC_G3D EXYNOS_CLKREG(0x0C22C)
#define EXYNOS4_CLKSRC_IMAGE EXYNOS_CLKREG(0x0C230)
#define EXYNOS4_CLKSRC_LCD0 EXYNOS_CLKREG(0x0C234)
#define EXYNOS4_CLKSRC_MAUDIO EXYNOS_CLKREG(0x0C23C)
#define EXYNOS4_CLKSRC_FSYS EXYNOS_CLKREG(0x0C240)
#define EXYNOS4_CLKSRC_PERIL0 EXYNOS_CLKREG(0x0C250)
#define EXYNOS4_CLKSRC_PERIL1 EXYNOS_CLKREG(0x0C254)
#define EXYNOS4_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x0C310)
#define EXYNOS4_CLKSRC_MASK_CAM EXYNOS_CLKREG(0x0C320)
#define EXYNOS4_CLKSRC_MASK_TV EXYNOS_CLKREG(0x0C324)
#define EXYNOS4_CLKSRC_MASK_LCD0 EXYNOS_CLKREG(0x0C334)
#define EXYNOS4_CLKSRC_MASK_MAUDIO EXYNOS_CLKREG(0x0C33C)
#define EXYNOS4_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x0C340)
#define EXYNOS4_CLKSRC_MASK_PERIL0 EXYNOS_CLKREG(0x0C350)
#define EXYNOS4_CLKSRC_MASK_PERIL1 EXYNOS_CLKREG(0x0C354)
#define EXYNOS4_CLKDIV_TOP EXYNOS_CLKREG(0x0C510)
#define EXYNOS4_CLKDIV_CAM EXYNOS_CLKREG(0x0C520)
#define EXYNOS4_CLKDIV_TV EXYNOS_CLKREG(0x0C524)
#define EXYNOS4_CLKDIV_MFC EXYNOS_CLKREG(0x0C528)
#define EXYNOS4_CLKDIV_G3D EXYNOS_CLKREG(0x0C52C)
#define EXYNOS4_CLKDIV_IMAGE EXYNOS_CLKREG(0x0C530)
#define EXYNOS4_CLKDIV_LCD0 EXYNOS_CLKREG(0x0C534)
#define EXYNOS4_CLKDIV_MAUDIO EXYNOS_CLKREG(0x0C53C)
#define EXYNOS4_CLKDIV_FSYS0 EXYNOS_CLKREG(0x0C540)
#define EXYNOS4_CLKDIV_FSYS1 EXYNOS_CLKREG(0x0C544)
#define EXYNOS4_CLKDIV_FSYS2 EXYNOS_CLKREG(0x0C548)
#define EXYNOS4_CLKDIV_FSYS3 EXYNOS_CLKREG(0x0C54C)
#define EXYNOS4_CLKDIV_PERIL0 EXYNOS_CLKREG(0x0C550)
#define EXYNOS4_CLKDIV_PERIL1 EXYNOS_CLKREG(0x0C554)
#define EXYNOS4_CLKDIV_PERIL2 EXYNOS_CLKREG(0x0C558)
#define EXYNOS4_CLKDIV_PERIL3 EXYNOS_CLKREG(0x0C55C)
#define EXYNOS4_CLKDIV_PERIL4 EXYNOS_CLKREG(0x0C560)
#define EXYNOS4_CLKDIV_PERIL5 EXYNOS_CLKREG(0x0C564)
#define EXYNOS4_CLKDIV2_RATIO EXYNOS_CLKREG(0x0C580)
#define EXYNOS4_CLKDIV_STAT_TOP EXYNOS_CLKREG(0x0C610)
#define EXYNOS4_CLKDIV_STAT_MFC EXYNOS_CLKREG(0x0C628)
#define EXYNOS4_CLKGATE_SCLKCAM EXYNOS_CLKREG(0x0C820)
#define EXYNOS4_CLKGATE_IP_CAM EXYNOS_CLKREG(0x0C920)
#define EXYNOS4_CLKGATE_IP_TV EXYNOS_CLKREG(0x0C924)
#define EXYNOS4_CLKGATE_IP_MFC EXYNOS_CLKREG(0x0C928)
#define EXYNOS4_CLKGATE_IP_G3D EXYNOS_CLKREG(0x0C92C)
#define EXYNOS4_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
EXYNOS_CLKREG(0x0C930) : \
EXYNOS_CLKREG(0x04930))
#define EXYNOS4210_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x0C930)
#define EXYNOS4212_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x04930)
#define EXYNOS4_CLKGATE_IP_LCD0 EXYNOS_CLKREG(0x0C934)
#define EXYNOS4_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x0C940)
#define EXYNOS4_CLKGATE_IP_GPS EXYNOS_CLKREG(0x0C94C)
#define EXYNOS4_CLKGATE_IP_PERIL EXYNOS_CLKREG(0x0C950)
#define EXYNOS4_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
EXYNOS_CLKREG(0x0C960) : \
EXYNOS_CLKREG(0x08960))
#define EXYNOS4210_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x0C960)
#define EXYNOS4212_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x08960)
#define EXYNOS4_CLKGATE_BLOCK EXYNOS_CLKREG(0x0C970)
#define EXYNOS4_CLKSRC_MASK_DMC EXYNOS_CLKREG(0x10300)
#define EXYNOS4_CLKSRC_DMC EXYNOS_CLKREG(0x10200)
#define EXYNOS4_CLKDIV_DMC0 EXYNOS_CLKREG(0x10500)
#define EXYNOS4_CLKDIV_DMC1 EXYNOS_CLKREG(0x10504)
#define EXYNOS4_CLKDIV_STAT_DMC0 EXYNOS_CLKREG(0x10600)
#define EXYNOS4_CLKDIV_STAT_DMC1 EXYNOS_CLKREG(0x10604)
#define EXYNOS4_CLKGATE_IP_DMC EXYNOS_CLKREG(0x10900)
#define EXYNOS4_DMC_PAUSE_CTRL EXYNOS_CLKREG(0x11094)
#define EXYNOS4_DMC_PAUSE_ENABLE (1 << 0)
#define EXYNOS4_APLL_LOCK EXYNOS_CLKREG(0x14000)
#define EXYNOS4_MPLL_LOCK (soc_is_exynos4210() ? \
EXYNOS_CLKREG(0x14004) : \
EXYNOS_CLKREG(0x10008))
#define EXYNOS4_APLL_CON0 EXYNOS_CLKREG(0x14100)
#define EXYNOS4_APLL_CON1 EXYNOS_CLKREG(0x14104)
#define EXYNOS4_MPLL_CON0 (soc_is_exynos4210() ? \
EXYNOS_CLKREG(0x14108) : \
EXYNOS_CLKREG(0x10108))
#define EXYNOS4_MPLL_CON1 (soc_is_exynos4210() ? \
EXYNOS_CLKREG(0x1410C) : \
EXYNOS_CLKREG(0x1010C))
#define EXYNOS4_CLKSRC_CPU EXYNOS_CLKREG(0x14200)
#define EXYNOS4_CLKMUX_STATCPU EXYNOS_CLKREG(0x14400)
#define EXYNOS4_CLKDIV_CPU EXYNOS_CLKREG(0x14500)
#define EXYNOS4_CLKDIV_CPU1 EXYNOS_CLKREG(0x14504)
#define EXYNOS4_CLKDIV_STATCPU EXYNOS_CLKREG(0x14600)
#define EXYNOS4_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x14604)
#define EXYNOS4_CLKGATE_SCLKCPU EXYNOS_CLKREG(0x14800)
#define EXYNOS4_CLKGATE_IP_CPU EXYNOS_CLKREG(0x14900)
#define EXYNOS4_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x18800)
#define EXYNOS4_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x18804)
#define EXYNOS4_APLL_LOCKTIME (0x1C20) /* 300us */
#define EXYNOS4_APLLCON0_ENABLE_SHIFT (31)
#define EXYNOS4_APLLCON0_LOCKED_SHIFT (29)
#define EXYNOS4_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
#define EXYNOS4_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
#define EXYNOS4_EPLLCON0_ENABLE_SHIFT (31)
#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29)
#define EXYNOS4_VPLLCON0_ENABLE_SHIFT (31)
#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29)
#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16)
#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
#define EXYNOS4_CLKDIV_CPU0_CORE_SHIFT (0)
#define EXYNOS4_CLKDIV_CPU0_CORE_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT)
#define EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT (4)
#define EXYNOS4_CLKDIV_CPU0_COREM0_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT)
#define EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT (8)
#define EXYNOS4_CLKDIV_CPU0_COREM1_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT)
#define EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT (12)
#define EXYNOS4_CLKDIV_CPU0_PERIPH_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT)
#define EXYNOS4_CLKDIV_CPU0_ATB_SHIFT (16)
#define EXYNOS4_CLKDIV_CPU0_ATB_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT)
#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT (20)
#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT)
#define EXYNOS4_CLKDIV_CPU0_APLL_SHIFT (24)
#define EXYNOS4_CLKDIV_CPU0_APLL_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT)
#define EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT 28
#define EXYNOS4_CLKDIV_CPU0_CORE2_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT)
#define EXYNOS4_CLKDIV_CPU1_COPY_SHIFT 0
#define EXYNOS4_CLKDIV_CPU1_COPY_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT)
#define EXYNOS4_CLKDIV_CPU1_HPM_SHIFT 4
#define EXYNOS4_CLKDIV_CPU1_HPM_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT)
#define EXYNOS4_CLKDIV_CPU1_CORES_SHIFT 8
#define EXYNOS4_CLKDIV_CPU1_CORES_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT)
#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT (0)
#define EXYNOS4_CLKDIV_DMC0_ACP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT)
#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT)
#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT (8)
#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT)
#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT (12)
#define EXYNOS4_CLKDIV_DMC0_DMC_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT)
#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT (16)
#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT)
#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT (20)
#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)
#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT (24)
#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT)
#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT (28)
#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)
#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT (0)
#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK (0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT)
#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT (4)
#define EXYNOS4_CLKDIV_DMC1_C2C_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT)
#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT (8)
#define EXYNOS4_CLKDIV_DMC1_PWI_MASK (0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT)
#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT (12)
#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)
#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT (16)
#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT)
#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT (24)
#define EXYNOS4_CLKDIV_DMC1_DPM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT)
#define EXYNOS4_CLKDIV_MFC_SHIFT (0)
#define EXYNOS4_CLKDIV_MFC_MASK (0x7 << EXYNOS4_CLKDIV_MFC_SHIFT)
#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT (0)
#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT)
#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT (4)
#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK (0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT)
#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT (8)
#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT)
#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT (12)
#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT)
#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT (16)
#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)
#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT (20)
#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT)
#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT (24)
#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT)
#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT (0)
#define EXYNOS4_CLKDIV_BUS_GDLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT)
#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT (4)
#define EXYNOS4_CLKDIV_BUS_GPLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)
#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT (0)
#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT)
#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT (4)
#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT)
#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT (8)
#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT)
#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT (12)
#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)
/* Only for EXYNOS4210 */
#define EXYNOS4210_CLKSRC_LCD1 EXYNOS_CLKREG(0x0C238)
#define EXYNOS4210_CLKSRC_MASK_LCD1 EXYNOS_CLKREG(0x0C338)
#define EXYNOS4210_CLKDIV_LCD1 EXYNOS_CLKREG(0x0C538)
#define EXYNOS4210_CLKGATE_IP_LCD1 EXYNOS_CLKREG(0x0C938)
/* Only for EXYNOS4212 */
#define EXYNOS4_CLKDIV_CAM1 EXYNOS_CLKREG(0x0C568)
#define EXYNOS4_CLKDIV_STAT_CAM1 EXYNOS_CLKREG(0x0C668)
#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0)
#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
/* For EXYNOS5250 */
#define EXYNOS5_APLL_LOCK EXYNOS_CLKREG(0x00000)
#define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100)
#define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200)
#define EXYNOS5_CLKMUX_STATCPU EXYNOS_CLKREG(0x00400)
#define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500)
#define EXYNOS5_CLKDIV_CPU1 EXYNOS_CLKREG(0x00504)
#define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600)
#define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604)
#define EXYNOS5_PWR_CTRL1 EXYNOS_CLKREG(0x01020)
#define EXYNOS5_PWR_CTRL2 EXYNOS_CLKREG(0x01024)
#define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100)
#define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204)
#define EXYNOS5_CLKGATE_IP_CORE EXYNOS_CLKREG(0x04900)
#define EXYNOS5_CLKDIV_ACP EXYNOS_CLKREG(0x08500)
#define EXYNOS5_EPLL_CON0 EXYNOS_CLKREG(0x10130)
#define EXYNOS5_EPLL_CON1 EXYNOS_CLKREG(0x10134)
#define EXYNOS5_EPLL_CON2 EXYNOS_CLKREG(0x10138)
#define EXYNOS5_VPLL_CON0 EXYNOS_CLKREG(0x10140)
#define EXYNOS5_VPLL_CON1 EXYNOS_CLKREG(0x10144)
#define EXYNOS5_VPLL_CON2 EXYNOS_CLKREG(0x10148)
#define EXYNOS5_CPLL_CON0 EXYNOS_CLKREG(0x10120)
#define EXYNOS5_CLKSRC_TOP0 EXYNOS_CLKREG(0x10210)
#define EXYNOS5_CLKSRC_TOP1 EXYNOS_CLKREG(0x10214)
#define EXYNOS5_CLKSRC_TOP2 EXYNOS_CLKREG(0x10218)
#define EXYNOS5_CLKSRC_TOP3 EXYNOS_CLKREG(0x1021C)
#define EXYNOS5_CLKSRC_GSCL EXYNOS_CLKREG(0x10220)
#define EXYNOS5_CLKSRC_DISP1_0 EXYNOS_CLKREG(0x1022C)
#define EXYNOS5_CLKSRC_MAUDIO EXYNOS_CLKREG(0x10240)
#define EXYNOS5_CLKSRC_FSYS EXYNOS_CLKREG(0x10244)
#define EXYNOS5_CLKSRC_PERIC0 EXYNOS_CLKREG(0x10250)
#define EXYNOS5_CLKSRC_PERIC1 EXYNOS_CLKREG(0x10254)
#define EXYNOS5_SCLK_SRC_ISP EXYNOS_CLKREG(0x10270)
#define EXYNOS5_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x10310)
#define EXYNOS5_CLKSRC_MASK_GSCL EXYNOS_CLKREG(0x10320)
#define EXYNOS5_CLKSRC_MASK_DISP1_0 EXYNOS_CLKREG(0x1032C)
#define EXYNOS5_CLKSRC_MASK_MAUDIO EXYNOS_CLKREG(0x10334)
#define EXYNOS5_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x10340)
#define EXYNOS5_CLKSRC_MASK_PERIC0 EXYNOS_CLKREG(0x10350)
#define EXYNOS5_CLKSRC_MASK_PERIC1 EXYNOS_CLKREG(0x10354)
#define EXYNOS5_CLKDIV_TOP0 EXYNOS_CLKREG(0x10510)
#define EXYNOS5_CLKDIV_TOP1 EXYNOS_CLKREG(0x10514)
#define EXYNOS5_CLKDIV_GSCL EXYNOS_CLKREG(0x10520)
#define EXYNOS5_CLKDIV_DISP1_0 EXYNOS_CLKREG(0x1052C)
#define EXYNOS5_CLKDIV_GEN EXYNOS_CLKREG(0x1053C)
#define EXYNOS5_CLKDIV_MAUDIO EXYNOS_CLKREG(0x10544)
#define EXYNOS5_CLKDIV_FSYS0 EXYNOS_CLKREG(0x10548)
#define EXYNOS5_CLKDIV_FSYS1 EXYNOS_CLKREG(0x1054C)
#define EXYNOS5_CLKDIV_FSYS2 EXYNOS_CLKREG(0x10550)
#define EXYNOS5_CLKDIV_FSYS3 EXYNOS_CLKREG(0x10554)
#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558)
#define EXYNOS5_CLKDIV_PERIC1 EXYNOS_CLKREG(0x1055C)
#define EXYNOS5_CLKDIV_PERIC2 EXYNOS_CLKREG(0x10560)
#define EXYNOS5_CLKDIV_PERIC3 EXYNOS_CLKREG(0x10564)
#define EXYNOS5_CLKDIV_PERIC4 EXYNOS_CLKREG(0x10568)
#define EXYNOS5_CLKDIV_PERIC5 EXYNOS_CLKREG(0x1056C)
#define EXYNOS5_SCLK_DIV_ISP EXYNOS_CLKREG(0x10580)
#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
#define EXYNOS5_CLKGATE_IP_ISP0 EXYNOS_CLKREG(0x0C800)
#define EXYNOS5_CLKGATE_IP_ISP1 EXYNOS_CLKREG(0x0C804)
#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920)
#define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928)
#define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C)
#define EXYNOS5_CLKGATE_IP_G3D EXYNOS_CLKREG(0x10930)
#define EXYNOS5_CLKGATE_IP_GEN EXYNOS_CLKREG(0x10934)
#define EXYNOS5_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x10944)
#define EXYNOS5_CLKGATE_IP_GPS EXYNOS_CLKREG(0x1094C)
#define EXYNOS5_CLKGATE_IP_PERIC EXYNOS_CLKREG(0x10950)
#define EXYNOS5_CLKGATE_IP_PERIS EXYNOS_CLKREG(0x10960)
#define EXYNOS5_CLKGATE_BLOCK EXYNOS_CLKREG(0x10980)
#define EXYNOS5_BPLL_CON0 EXYNOS_CLKREG(0x20110)
#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200)
#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500)
#define EXYNOS5_PLL_DIV2_SEL EXYNOS_CLKREG(0x20A24)
#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030)
#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29)
#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28)
#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16)
#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9)
#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8)
#define PWR_CTRL1_USE_CORE1_WFE (1 << 5)
#define PWR_CTRL1_USE_CORE0_WFE (1 << 4)
#define PWR_CTRL1_USE_CORE1_WFI (1 << 1)
#define PWR_CTRL1_USE_CORE0_WFI (1 << 0)
#define PWR_CTRL2_DIV2_UP_EN (1 << 25)
#define PWR_CTRL2_DIV1_UP_EN (1 << 24)
#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16)
#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8)
#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4)
#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0)
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
#define S5P_EPLL_CON EXYNOS4_EPLL_CON0
#endif /* __ASM_ARCH_REGS_CLOCK_H */

19
arch/arm/mach-exynos/include/mach/regs-irq.h
View File

@ -1,19 +0,0 @@
/* linux/arch/arm/mach-exynos4/include/mach/regs-irq.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - IRQ register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGS_IRQ_H
#define __ASM_ARCH_REGS_IRQ_H __FILE__
#include <linux/irqchip/arm-gic.h>
#include <mach/map.h>
#endif /* __ASM_ARCH_REGS_IRQ_H */

2
arch/arm/mach-exynos/mach-exynos5-dt.c
View File

@ -14,10 +14,10 @@
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <mach/regs-pmu.h>
#include <plat/mfc.h>
#include "common.h"
#include "regs-pmu.h"
static void __init exynos5_dt_machine_init(void)
{

6
arch/arm/mach-exynos/platsmp.c
View File

@ -27,12 +27,11 @@
#include <asm/firmware.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
#include "common.h"
#include "regs-pmu.h"
extern void exynos4_secondary_startup(void);
@ -64,8 +63,7 @@ static void write_pen_release(int val)
{
pen_release = val;
smp_wmb();
__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
sync_cache_w(&pen_release);
}
static void __iomem *scu_base_addr(void)

33
arch/arm/mach-exynos/pm.c
View File

@ -29,14 +29,37 @@
#include <plat/pll.h>
#include <plat/regs-srom.h>
#include <mach/regs-irq.h>
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <mach/map.h>
#include <mach/pm-core.h>
#include "common.h"
#include "regs-pmu.h"
static struct sleep_save exynos4_set_clksrc[] = {
#define EXYNOS4_EPLL_LOCK (S5P_VA_CMU + 0x0C010)
#define EXYNOS4_VPLL_LOCK (S5P_VA_CMU + 0x0C020)
#define EXYNOS4_EPLL_CON0 (S5P_VA_CMU + 0x0C110)
#define EXYNOS4_EPLL_CON1 (S5P_VA_CMU + 0x0C114)
#define EXYNOS4_VPLL_CON0 (S5P_VA_CMU + 0x0C120)
#define EXYNOS4_VPLL_CON1 (S5P_VA_CMU + 0x0C124)
#define EXYNOS4_CLKSRC_MASK_TOP (S5P_VA_CMU + 0x0C310)
#define EXYNOS4_CLKSRC_MASK_CAM (S5P_VA_CMU + 0x0C320)
#define EXYNOS4_CLKSRC_MASK_TV (S5P_VA_CMU + 0x0C324)
#define EXYNOS4_CLKSRC_MASK_LCD0 (S5P_VA_CMU + 0x0C334)
#define EXYNOS4_CLKSRC_MASK_MAUDIO (S5P_VA_CMU + 0x0C33C)
#define EXYNOS4_CLKSRC_MASK_FSYS (S5P_VA_CMU + 0x0C340)
#define EXYNOS4_CLKSRC_MASK_PERIL0 (S5P_VA_CMU + 0x0C350)
#define EXYNOS4_CLKSRC_MASK_PERIL1 (S5P_VA_CMU + 0x0C354)
#define EXYNOS4_CLKSRC_MASK_DMC (S5P_VA_CMU + 0x10300)
#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29)
#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29)
#define EXYNOS4210_CLKSRC_MASK_LCD1 (S5P_VA_CMU + 0x0C338)
static const struct sleep_save exynos4_set_clksrc[] = {
{ .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, },
{ .reg = EXYNOS4_CLKSRC_MASK_CAM , .val = 0x11111111, },
{ .reg = EXYNOS4_CLKSRC_MASK_TV , .val = 0x00000111, },
@ -48,7 +71,7 @@ static struct sleep_save exynos4_set_clksrc[] = {
{ .reg = EXYNOS4_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
static struct sleep_save exynos4210_set_clksrc[] = {
static const struct sleep_save exynos4210_set_clksrc[] = {
{ .reg = EXYNOS4210_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
};

9
arch/arm/mach-exynos/pm_domains.c
View File

@ -22,9 +22,10 @@
#include <linux/of_platform.h>
#include <linux/sched.h>
#include <mach/regs-pmu.h>
#include <plat/devs.h>
#include "regs-pmu.h"
/*
* Exynos specific wrapper around the generic power domain
*/
@ -183,9 +184,3 @@ static __init int exynos4_pm_init_power_domain(void)
return 0;
}
arch_initcall(exynos4_pm_init_power_domain);
int __init exynos_pm_late_initcall(void)
{
pm_genpd_poweroff_unused();
return 0;
}

17
arch/arm/mach-exynos/pmu.c
View File

@ -13,13 +13,14 @@
#include <linux/kernel.h>
#include <linux/bug.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include "common.h"
#include "regs-pmu.h"
static struct exynos_pmu_conf *exynos_pmu_config;
static const struct exynos_pmu_conf *exynos_pmu_config;
static struct exynos_pmu_conf exynos4210_pmu_config[] = {
static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
@ -95,7 +96,7 @@ static struct exynos_pmu_conf exynos4210_pmu_config[] = {
{ PMU_TABLE_END,},
};
static struct exynos_pmu_conf exynos4x12_pmu_config[] = {
static const struct exynos_pmu_conf exynos4x12_pmu_config[] = {
{ S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
@ -203,7 +204,7 @@ static struct exynos_pmu_conf exynos4x12_pmu_config[] = {
{ PMU_TABLE_END,},
};
static struct exynos_pmu_conf exynos4412_pmu_config[] = {
static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
{ S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } },
{ S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } },
{ S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } },
@ -213,7 +214,7 @@ static struct exynos_pmu_conf exynos4412_pmu_config[] = {
{ PMU_TABLE_END,},
};
static struct exynos_pmu_conf exynos5250_pmu_config[] = {
static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
{ EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
@ -317,7 +318,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = {
{ PMU_TABLE_END,},
};
static void __iomem *exynos5_list_both_cnt_feed[] = {
static void __iomem * const exynos5_list_both_cnt_feed[] = {
EXYNOS5_ARM_CORE0_OPTION,
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_ARM_COMMON_OPTION,
@ -331,7 +332,7 @@ static void __iomem *exynos5_list_both_cnt_feed[] = {
EXYNOS5_TOP_PWR_SYSMEM_OPTION,
};
static void __iomem *exynos5_list_diable_wfi_wfe[] = {
static void __iomem * const exynos5_list_diable_wfi_wfe[] = {
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_FSYS_ARM_OPTION,
EXYNOS5_ISP_ARM_OPTION,

53
arch/arm/mach-exynos/include/mach/regs-pmu.h → arch/arm/mach-exynos/regs-pmu.h
View File

@ -24,31 +24,16 @@
#define S5P_CENTRAL_SEQ_OPTION S5P_PMUREG(0x0208)
#define S5P_USE_STANDBY_WFI0 (1 << 16)
#define S5P_USE_STANDBY_WFI1 (1 << 17)
#define S5P_USE_STANDBYWFI_ISP_ARM (1 << 18)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
#define S5P_USE_STANDBY_WFE1 (1 << 25)
#define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26)
#define S5P_SWRESET S5P_PMUREG(0x0400)
#define EXYNOS_SWRESET S5P_PMUREG(0x0400)
#define EXYNOS5440_SWRESET S5P_PMUREG(0x00C4)
#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
#define S5P_HDMI_PHY_CONTROL S5P_PMUREG(0x0700)
#define S5P_HDMI_PHY_ENABLE (1 << 0)
#define S5P_DAC_PHY_CONTROL S5P_PMUREG(0x070C)
#define S5P_DAC_PHY_ENABLE (1 << 0)
#define S5P_INFORM0 S5P_PMUREG(0x0800)
#define S5P_INFORM1 S5P_PMUREG(0x0804)
#define S5P_INFORM2 S5P_PMUREG(0x0808)
#define S5P_INFORM3 S5P_PMUREG(0x080C)
#define S5P_INFORM4 S5P_PMUREG(0x0810)
#define S5P_INFORM5 S5P_PMUREG(0x0814)
#define S5P_INFORM6 S5P_PMUREG(0x0818)
#define S5P_INFORM7 S5P_PMUREG(0x081C)
@ -119,23 +104,8 @@
#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
#define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
#define S5P_ARM_CORE0_OPTION S5P_PMUREG(0x2008)
#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
#define S5P_ARM_CORE1_OPTION S5P_PMUREG(0x2088)
#define S5P_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
#define S5P_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
#define S5P_CAM_OPTION S5P_PMUREG(0x3C08)
#define S5P_TV_OPTION S5P_PMUREG(0x3C28)
#define S5P_MFC_OPTION S5P_PMUREG(0x3C48)
#define S5P_G3D_OPTION S5P_PMUREG(0x3C68)
#define S5P_LCD0_OPTION S5P_PMUREG(0x3C88)
#define S5P_LCD1_OPTION S5P_PMUREG(0x3CA8)
#define S5P_MAUDIO_OPTION S5P_PMUREG(0x3CC8)
#define S5P_GPS_OPTION S5P_PMUREG(0x3CE8)
#define S5P_GPS_ALIVE_OPTION S5P_PMUREG(0x3D08)
#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028)
#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108)
@ -145,28 +115,12 @@
#define S5P_PAD_RET_EBIA_OPTION S5P_PMUREG(0x3188)
#define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8)
#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00)
#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20)
#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40)
#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60)
#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80)
#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0)
#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1
#define S5P_CORE_LOCAL_PWR_EN 0x3
#define S5P_INT_LOCAL_PWR_EN 0x7
#define S5P_CHECK_SLEEP 0x00000BAD
/* Only for EXYNOS4210 */
#define S5P_USBDEVICE_PHY_CONTROL S5P_PMUREG(0x0704)
#define S5P_USBDEVICE_PHY_ENABLE (1 << 0)
#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708)
#define S5P_USBHOST_PHY_ENABLE (1 << 0)
#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720)
#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
@ -174,8 +128,6 @@
#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
/* Only for EXYNOS4x12 */
#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050)
#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054)
@ -343,13 +295,9 @@
#define EXYNOS5_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
#define EXYNOS5_TOP_PWR_SYSMEM_OPTION S5P_PMUREG(0x2CC8)
#define EXYNOS5_JPEG_MEM_OPTION S5P_PMUREG(0x2F48)
#define EXYNOS5_GSCL_STATUS S5P_PMUREG(0x4004)
#define EXYNOS5_ISP_STATUS S5P_PMUREG(0x4024)
#define EXYNOS5_GSCL_OPTION S5P_PMUREG(0x4008)
#define EXYNOS5_ISP_OPTION S5P_PMUREG(0x4028)
#define EXYNOS5_MFC_OPTION S5P_PMUREG(0x4048)
#define EXYNOS5_G3D_CONFIGURATION S5P_PMUREG(0x4060)
#define EXYNOS5_G3D_STATUS S5P_PMUREG(0x4064)
#define EXYNOS5_G3D_OPTION S5P_PMUREG(0x4068)
#define EXYNOS5_DISP1_OPTION S5P_PMUREG(0x40A8)
#define EXYNOS5_MAU_OPTION S5P_PMUREG(0x40C8)
@ -357,7 +305,6 @@
#define EXYNOS5_USE_SC_FEEDBACK (1 << 1)
#define EXYNOS5_USE_SC_COUNTER (1 << 0)
#define EXYNOS5_MANUAL_L2RSTDISABLE_CONTROL (1 << 2)
#define EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7)
#define EXYNOS5_OPTION_USE_STANDBYWFE (1 << 24)

3
arch/arm/mach-imx/platsmp.c
View File

@ -92,8 +92,7 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
* secondary cores when booting them.
*/
asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc");
__cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg));
outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1));
sync_cache_w(&g_diag_reg);
}
struct smp_operations imx_smp_ops __initdata = {

40
arch/arm/mach-kirkwood/board-dt.c
View File

@ -10,55 +10,21 @@
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <linux/dma-mapping.h>
#include <linux/irqchip.h>
#include <linux/kexec.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/irq.h>
#include <plat/common.h>
#include "common.h"
/*
* There are still devices that doesn't know about DT yet. Get clock
* gates here and add a clock lookup alias, so that old platform
* devices still work.
*/
static void __init kirkwood_legacy_clk_init(void)
{
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
struct of_phandle_args clkspec;
struct clk *clk;
clkspec.np = np;
clkspec.args_count = 1;
/*
* The ethernet interfaces forget the MAC address assigned by
* u-boot if the clocks are turned off. Until proper DT support
* is available we always enable them for now.
*/
clkspec.args[0] = CGC_BIT_GE0;
clk = of_clk_get_from_provider(&clkspec);
clk_prepare_enable(clk);
clkspec.args[0] = CGC_BIT_GE1;
clk = of_clk_get_from_provider(&clkspec);
clk_prepare_enable(clk);
}
#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
@ -140,7 +106,7 @@ eth_fixup_skip:
static void __init kirkwood_dt_init(void)
{
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
pr_info("Kirkwood: %s.\n", kirkwood_id());
/*
* Disable propagation of mbus errors to the CPU local bus,
@ -156,8 +122,6 @@ static void __init kirkwood_dt_init(void)
kirkwood_cpufreq_init();
kirkwood_cpuidle_init();
/* Setup clocks for legacy devices */
kirkwood_legacy_clk_init();
kirkwood_pm_init();
kirkwood_dt_eth_fixup();

3
arch/arm/mach-mmp/Kconfig
View File

@ -136,4 +136,7 @@ config USB_EHCI_MV_U2O
help
Enables support for OTG controller which can be switched to host mode.
config MMP_SRAM
bool
endif

3
arch/arm/mach-mmp/Makefile
View File

@ -7,7 +7,8 @@ obj-y += common.o devices.o time.o
# SoC support
obj-$(CONFIG_CPU_PXA168) += pxa168.o
obj-$(CONFIG_CPU_PXA910) += pxa910.o
obj-$(CONFIG_CPU_MMP2) += mmp2.o sram.o
obj-$(CONFIG_CPU_MMP2) += mmp2.o
obj-$(CONFIG_MMP_SRAM) += sram.o
ifeq ($(CONFIG_COMMON_CLK), )
obj-y += clock.o

3
arch/arm/mach-msm/platsmp.c
View File

@ -99,8 +99,7 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
* "cpu" is Linux's internal ID.
*/
pen_release = cpu_logical_map(cpu);
__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
sync_cache_w(&pen_release);
/*
* Send the secondary CPU a soft interrupt, thereby causing

4
arch/arm/mach-mvebu/armada-370-xp.h
View File

@ -18,8 +18,12 @@
#ifdef CONFIG_SMP
#include <linux/cpumask.h>
#define ARMADA_XP_MAX_CPUS 4
void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq);
void armada_xp_mpic_smp_cpu_init(void);
void armada_xp_secondary_startup(void);
extern struct smp_operations armada_xp_smp_ops;
#endif
#endif /* __MACH_ARMADA_370_XP_H */

1
arch/arm/mach-mvebu/coherency.c
View File

@ -27,6 +27,7 @@
#include <asm/smp_plat.h>
#include <asm/cacheflush.h>
#include "armada-370-xp.h"
#include "coherency.h"
unsigned long coherency_phys_base;
static void __iomem *coherency_base;

4
arch/arm/mach-mvebu/coherency.h
View File

@ -14,7 +14,9 @@
#ifndef __MACH_370_XP_COHERENCY_H
#define __MACH_370_XP_COHERENCY_H
int set_cpu_coherent(int cpu_id, int smp_group_id);
extern unsigned long coherency_phys_base;
int set_cpu_coherent(unsigned int cpu_id, int smp_group_id);
int coherency_init(void);
#endif /* __MACH_370_XP_COHERENCY_H */

10
arch/arm/mach-mvebu/common.h
View File

@ -15,18 +15,10 @@
#ifndef __ARCH_MVEBU_COMMON_H
#define __ARCH_MVEBU_COMMON_H
#define ARMADA_XP_MAX_CPUS 4
#include <linux/reboot.h>
void mvebu_restart(enum reboot_mode mode, const char *cmd);
void armada_370_xp_init_irq(void);
void armada_370_xp_handle_irq(struct pt_regs *regs);
void armada_xp_cpu_die(unsigned int cpu);
int armada_370_xp_coherency_init(void);
int armada_370_xp_pmsu_init(void);
void armada_xp_secondary_startup(void);
extern struct smp_operations armada_xp_smp_ops;
#endif

1
arch/arm/mach-mvebu/hotplug.c
View File

@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/smp.h>
#include <asm/proc-fns.h>
#include "common.h"
/*
* platform-specific code to shutdown a CPU

4
arch/arm/mach-mvebu/platsmp.c
View File

@ -46,7 +46,7 @@ static struct clk *__init get_cpu_clk(int cpu)
return cpu_clk;
}
void __init set_secondary_cpus_clock(void)
static void __init set_secondary_cpus_clock(void)
{
int thiscpu, cpu;
unsigned long rate;
@ -94,7 +94,7 @@ static void __init armada_xp_smp_init_cpus(void)
set_smp_cross_call(armada_mpic_send_doorbell);
}
void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
{
struct device_node *node;
struct resource res;

Some files were not shown because too many files have changed in this diff Show More