redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: dts: imx53-qsb: Use DRM bindings for the Seiko 43WVF1G panel

Browse source 
Currently the parallel panel that is supported is the CLAA WVGA panel,
which is the one that comes with the i.MX51 Babbage board.

The default parallel panel that goes with the imx53-qsb board is
the Seiko 43WVF1G LCD, so switch to the Seiko one.

While at it convert to DRM bindings.

The parallel display still remains disabled as the default display
port is the TVE output.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Fabio Estevam 2019-10-24 18:57:12 -03:00 committed by Shawn Guo
parent ff84e9deae
commit f324c95290
1 changed files with 24 additions and 20 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

44
arch/arm/boot/dts/imx53-qsb-common.dtsi
View file

@ -18,32 +18,26 @@
display0: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu_disp0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
display-timings {
claawvga {
native-mode;
clock-frequency = <27000000>;
hactive = <800>;
vactive = <480>;
hback-porch = <40>;
hfront-porch = <60>;
vback-porch = <10>;
vfront-porch = <10>;
hsync-len = <20>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
port@0 {
reg = <0>;
display0_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
port {
display0_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
port@1 {
reg = <1>;
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
@ -84,6 +78,16 @@
};
};
panel {
compatible = "sii,43wvf1g";
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;