diff --git a/Makefile b/Makefile index 6127ca66ed98..36a77a3d156c 100644 --- a/Makefile +++ b/Makefile @@ -10,11 +10,9 @@ NAME = Shuffling Zombie Juror # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not: -# o use make's built-in rules and variables -# (this increases performance and avoids hard-to-debug behaviour); -# o print "Entering directory ..."; -MAKEFLAGS += -rR --no-print-directory +# Do not use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +MAKEFLAGS += -rR # Avoid funny character set dependencies unexport LC_ALL @@ -97,34 +95,6 @@ endif export quiet Q KBUILD_VERBOSE -# Call a source code checker (by default, "sparse") as part of the -# C compilation. -# -# Use 'make C=1' to enable checking of only re-compiled files. -# Use 'make C=2' to enable checking of *all* source files, regardless -# of whether they are re-compiled or not. -# -# See the file "Documentation/sparse.txt" for more details, including -# where to get the "sparse" utility. - -ifeq ("$(origin C)", "command line") - KBUILD_CHECKSRC = $(C) -endif -ifndef KBUILD_CHECKSRC - KBUILD_CHECKSRC = 0 -endif - -# Use make M=dir to specify directory of external module to build -# Old syntax make ... SUBDIRS=$PWD is still supported -# Setting the environment variable KBUILD_EXTMOD take precedence -ifdef SUBDIRS - KBUILD_EXTMOD ?= $(SUBDIRS) -endif - -ifeq ("$(origin M)", "command line") - KBUILD_EXTMOD := $(M) -endif - # kbuild supports saving output files in a separate directory. # To locate output files in a separate directory two syntaxes are supported. # In both cases the working directory must be the root of the kernel src. @@ -140,7 +110,6 @@ endif # The O= assignment takes precedence over the KBUILD_OUTPUT environment # variable. - # KBUILD_SRC is set on invocation of make in OBJ directory # KBUILD_SRC is not intended to be used by the regular user (for now) ifeq ($(KBUILD_SRC),) @@ -172,17 +141,9 @@ PHONY += $(MAKECMDGOALS) sub-make $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make @: -# Fake the "Entering directory" message once, so that IDEs/editors are -# able to understand relative filenames. - echodir := @echo - quiet_echodir := @echo -silent_echodir := @: sub-make: FORCE - $($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'" - $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ - KBUILD_SRC=$(CURDIR) \ - KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ - $(filter-out _all sub-make,$(MAKECMDGOALS)) + $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ + -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) # Leave processing to above invocation of make skip-makefile := 1 @@ -192,6 +153,39 @@ endif # ifeq ($(KBUILD_SRC),) # We process the rest of the Makefile if this is the final invocation of make ifeq ($(skip-makefile),) +# Do not print "Entering directory ...", +# but we want to display it when entering to the output directory +# so that IDEs/editors are able to understand relative filenames. +MAKEFLAGS += --no-print-directory + +# Call a source code checker (by default, "sparse") as part of the +# C compilation. +# +# Use 'make C=1' to enable checking of only re-compiled files. +# Use 'make C=2' to enable checking of *all* source files, regardless +# of whether they are re-compiled or not. +# +# See the file "Documentation/sparse.txt" for more details, including +# where to get the "sparse" utility. + +ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) +endif +ifndef KBUILD_CHECKSRC + KBUILD_CHECKSRC = 0 +endif + +# Use make M=dir to specify directory of external module to build +# Old syntax make ... SUBDIRS=$PWD is still supported +# Setting the environment variable KBUILD_EXTMOD take precedence +ifdef SUBDIRS + KBUILD_EXTMOD ?= $(SUBDIRS) +endif + +ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) +endif + # If building an external module we do not care about the all: rule # but instead _all depend on modules PHONY += all @@ -889,9 +883,7 @@ vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ $(net-y) $(net-m) $(libs-y) $(libs-m))) vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ - $(init-n) $(init-) \ - $(core-n) $(core-) $(drivers-n) $(drivers-) \ - $(net-n) $(net-) $(libs-n) $(libs-)))) + $(init-) $(core-) $(drivers-) $(net-) $(libs-)))) init-y := $(patsubst %/, %/built-in.o, $(init-y)) core-y := $(patsubst %/, %/built-in.o, $(core-y)) @@ -1591,7 +1583,7 @@ endif # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir # Usage: # $(Q)$(MAKE) $(clean)=dir -clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj +clean := -f $(srctree)/scripts/Makefile.clean obj endif # skip-makefile diff --git a/arch/arm/Makefile b/arch/arm/Makefile index dceb0441b1a6..034a94904d69 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -50,8 +50,6 @@ AS += -EL LD += -EL endif -comma = , - # This selects which instruction set is used. # Note that GCC does not numerically define an architecture version # macro, but instead defines a whole series of macros which makes diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ac99d87ffefe..1b9ae0257a6e 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -3,9 +3,6 @@ # obj-y := gpio.o setup.o sysirq_mask.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_OLD_IRQ_AT91) += irq.o obj-$(CONFIG_OLD_CLK_AT91) += clock.o diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile index 935e4af01a27..a7d68c13c1d1 100644 --- a/arch/arm/mach-ebsa110/Makefile +++ b/arch/arm/mach-ebsa110/Makefile @@ -5,6 +5,3 @@ # Object file lists. obj-y := core.o io.o leds.o -obj-m := -obj-n := -obj- := diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 0dc51f9462de..78d427b34b1f 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -2,9 +2,6 @@ # Makefile for the linux kernel. # obj-y := core.o clock.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_EP93XX_DMA) += dma.o diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 788f26d21141..27ae6144679c 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -7,11 +7,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include -obj-y := -obj-m := -obj-n := -obj- := - # Core obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index c3faa3bc84dd..e83d5c8396ff 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -5,9 +5,6 @@ # Object file lists. obj-y := common.o dma.o isa-irq.o -obj-m := -obj-n := -obj- := pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile index cad015fee12f..a3d9260e335f 100644 --- a/arch/arm/mach-iop13xx/Makefile +++ b/arch/arm/mach-iop13xx/Makefile @@ -1,8 +1,3 @@ -obj-y := -obj-m := -obj-n := -obj- := - obj-$(CONFIG_ARCH_IOP13XX) += setup.o obj-$(CONFIG_ARCH_IOP13XX) += irq.o obj-$(CONFIG_ARCH_IOP13XX) += pci.o diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile index cfdf8a137c2b..2d4010abb82f 100644 --- a/arch/arm/mach-iop32x/Makefile +++ b/arch/arm/mach-iop32x/Makefile @@ -3,9 +3,6 @@ # obj-y := irq.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_MACH_GLANTANK) += glantank.o obj-$(CONFIG_ARCH_IQ80321) += iq80321.o diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile index 90081d8c9d16..e95db30d81d5 100644 --- a/arch/arm/mach-iop33x/Makefile +++ b/arch/arm/mach-iop33x/Makefile @@ -3,9 +3,6 @@ # obj-y := irq.o uart.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_ARCH_IQ80331) += iq80331.o obj-$(CONFIG_MACH_IQ80332) += iq80332.o diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index e370caf0c91b..8ecb7973ae54 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -4,9 +4,6 @@ # obj-y := cpu.o irq.o time.o devices.o -obj-m := -obj-n := -obj- := # PCI support is optional obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile index 992e28b4ae9a..2ebc6875aeb8 100644 --- a/arch/arm/mach-rpc/Makefile +++ b/arch/arm/mach-rpc/Makefile @@ -5,7 +5,3 @@ # Object file lists. obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o -obj-m := -obj-n := -obj- := - diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 2235d0d3b38d..b92071638733 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -7,11 +7,6 @@ # # Licensed under GPLv2 -obj-y := -obj-m := -obj-n := -obj- := - # core obj-y += common.o diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 58069a702a43..12f67b61ca5f 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -5,11 +5,6 @@ # # Licensed under GPLv2 -obj-y := -obj-m := -obj-n := -obj- := - # Core obj-y += common.o diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 7dc2d0e25a83..72b9e9671507 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -7,11 +7,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include -obj-y := -obj-m := -obj-n := -obj- := - # Core obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 2732eef48966..f1114d11fe13 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -4,9 +4,6 @@ # Common support obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o -obj-m := -obj-n := -obj- := # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index 3ec74ac95bc1..87d37de054b6 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -3,9 +3,6 @@ # obj-y := core.o -obj-m := -obj-n := -obj- := obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o obj-$(CONFIG_REGULATOR_AB3100) += regulator.o diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile index 224e56c6049b..f2af203d601f 100644 --- a/arch/arm/plat-iop/Makefile +++ b/arch/arm/plat-iop/Makefile @@ -2,8 +2,6 @@ # Makefile for the linux kernel. # -obj-y := - # IOP32X obj-$(CONFIG_ARCH_IOP32X) += i2c.o obj-$(CONFIG_ARCH_IOP32X) += pci.o @@ -27,7 +25,3 @@ obj-$(CONFIG_ARCH_IOP33X) += restart.o # IOP13XX obj-$(CONFIG_ARCH_IOP13XX) += cp6.o obj-$(CONFIG_ARCH_IOP13XX) += time.o - -obj-m := -obj-n := -obj- := diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 0b01b68fd033..97a50e8883f9 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -6,9 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include # Common support obj-y := sram.o dma.o counter_32k.o -obj-m := -obj-n := -obj- := # omap_device support (OMAP2+ only at the moment) diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 5fe175017f07..f0a008496993 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -6,11 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include -obj-y := -obj-m := -obj-n := dummy.o -obj- := - # Objects we always build independent of SoC choice obj-y += init.o cpu.o diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 59c86b6b3052..20901ffed182 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -30,8 +30,6 @@ AS += -EL LD += -EL endif -comma = , - CHECKFLAGS += -D__aarch64__ # Default value diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile index 531d4f6c7050..960bf22d42ae 100644 --- a/drivers/clk/shmobile/Makefile +++ b/drivers/clk/shmobile/Makefile @@ -7,5 +7,3 @@ obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o -# for emply built-in.o -obj-n := dummy diff --git a/drivers/net/wimax/Makefile b/drivers/net/wimax/Makefile index 992bc02bc016..692184dd674a 100644 --- a/drivers/net/wimax/Makefile +++ b/drivers/net/wimax/Makefile @@ -1,5 +1 @@ - obj-$(CONFIG_WIMAX_I2400M) += i2400m/ - -# (from Sam Ravnborg) force kbuild to create built-in.o -obj- := dummy.o diff --git a/firmware/Makefile b/firmware/Makefile index 0862d34cf7d1..e297e1b52636 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -232,6 +232,6 @@ targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ # Without this, built-in.o won't be created when it's empty, and the # final vmlinux link will fail. -obj-n := dummy +obj- := dummy hostprogs-y := ihex2fw diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 8a9a4e1c7eab..65e7b08bb2cc 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -171,13 +171,13 @@ ld-ifversion = $(shell [ $(call ld-version) $(1) $(2) ] && echo $(3)) # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= # Usage: # $(Q)$(MAKE) $(build)=dir -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj +build := -f $(srctree)/scripts/Makefile.build obj ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj= # Usage: # $(Q)$(MAKE) $(modbuiltin)=dir -modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj +modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj # Prefix -I with $(srctree) if it is not an absolute path. # skip if -I has no parameter diff --git a/scripts/Makefile.build b/scripts/Makefile.build index bf3e6778cd71..649ce6844033 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -79,11 +79,11 @@ endif # =========================================================================== -ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),) +ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),) lib-target := $(obj)/lib.a endif -ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),) +ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),) builtin-target := $(obj)/built-in.o endif @@ -382,16 +382,14 @@ cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalys quiet_cmd_link_multi-m = LD [M] $@ cmd_link_multi-m = $(cmd_link_multi-y) -# We would rather have a list of rules like -# foo.o: $(foo-objs) -# but that's not so easy, so we rather make all composite objects depend -# on the set of all their parts -$(multi-used-y) : %.o: $(multi-objs-y) FORCE +$(multi-used-y): FORCE $(call if_changed,link_multi-y) +$(call multi_depend, $(multi-used-y), .o, -objs -y) -$(multi-used-m) : %.o: $(multi-objs-m) FORCE +$(multi-used-m): FORCE $(call if_changed,link_multi-m) @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod) +$(call multi_depend, $(multi-used-m), .o, -objs -y) targets += $(multi-used-y) $(multi-used-m) diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean index a651cee84f2a..b1c668dc6815 100644 --- a/scripts/Makefile.clean +++ b/scripts/Makefile.clean @@ -10,7 +10,7 @@ __clean: # Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir # Usage: # $(Q)$(MAKE) $(clean)=dir -clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj +clean := -f $(srctree)/scripts/Makefile.clean obj # The filename Kbuild has precedence over Makefile kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) @@ -23,15 +23,13 @@ __subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y))) subdir-y += $(__subdir-y) __subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m))) subdir-m += $(__subdir-m) -__subdir-n := $(patsubst %/,%,$(filter %/, $(obj-n))) -subdir-n += $(__subdir-n) __subdir- := $(patsubst %/,%,$(filter %/, $(obj-))) subdir- += $(__subdir-) # Subdirectories we need to descend into subdir-ym := $(sort $(subdir-y) $(subdir-m)) -subdir-ymn := $(sort $(subdir-ym) $(subdir-n) $(subdir-)) +subdir-ymn := $(sort $(subdir-ym) $(subdir-)) # Add subdir path diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index d8e335eed226..5b698add4f31 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -2,7 +2,7 @@ # Installing firmware # # We don't include the .config, so all firmware files are in $(fw-shipped-) -# rather than in $(fw-shipped-y) or $(fw-shipped-n). +# rather than in $(fw-shipped-y) or $(fw-shipped-m). # ========================================================================== INSTALL := install diff --git a/scripts/Makefile.host b/scripts/Makefile.host index ab5980f91714..133edfae5b8a 100644 --- a/scripts/Makefile.host +++ b/scripts/Makefile.host @@ -96,8 +96,9 @@ quiet_cmd_host-cmulti = HOSTLD $@ cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \ $(addprefix $(obj)/,$($(@F)-objs)) \ $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) -$(host-cmulti): $(obj)/%: $(host-cobjs) FORCE +$(host-cmulti): FORCE $(call if_changed,host-cmulti) +$(call multi_depend, $(host-cmulti), , -objs) # Create .o file from a single .c file # host-cobjs -> .o @@ -113,8 +114,9 @@ quiet_cmd_host-cxxmulti = HOSTLD $@ $(foreach o,objs cxxobjs,\ $(addprefix $(obj)/,$($(@F)-$(o)))) \ $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) -$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) FORCE +$(host-cxxmulti): FORCE $(call if_changed,host-cxxmulti) +$(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs) # Create .o file from a single .cc (C++) file quiet_cmd_host-cxxobjs = HOSTCXX $@ diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 260bf8acfce9..54be19a0fa51 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -159,6 +159,15 @@ dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \ modname-multi = $(sort $(foreach m,$(multi-used),\ $(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=)))) +# Useful for describing the dependency of composite objects +# Usage: +# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add) +define multi_depend +$(foreach m, $(notdir $1), \ + $(eval $(obj)/$m: \ + $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s))))))) +endef + ifdef REGENERATE_PARSERS # GPERF diff --git a/scripts/bootgraph.pl b/scripts/bootgraph.pl old mode 100644 new mode 100755 diff --git a/scripts/export_report.pl b/scripts/export_report.pl old mode 100644 new mode 100755 diff --git a/scripts/gcc-goto.sh b/scripts/gcc-goto.sh old mode 100644 new mode 100755 diff --git a/scripts/gcc-ld b/scripts/gcc-ld old mode 100644 new mode 100755 diff --git a/scripts/gcc-version.sh b/scripts/gcc-version.sh old mode 100644 new mode 100755 diff --git a/scripts/gcc-x86_32-has-stack-protector.sh b/scripts/gcc-x86_32-has-stack-protector.sh old mode 100644 new mode 100755 diff --git a/scripts/gcc-x86_64-has-stack-protector.sh b/scripts/gcc-x86_64-has-stack-protector.sh old mode 100644 new mode 100755 diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh old mode 100644 new mode 100755 diff --git a/scripts/headers_check.pl b/scripts/headers_check.pl old mode 100644 new mode 100755 diff --git a/scripts/headers_install.sh b/scripts/headers_install.sh old mode 100644 new mode 100755 diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index ebf40f6edb4d..9645c0739386 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -176,39 +176,10 @@ qconf-cxxobjs := qconf.o qconf-objs := zconf.tab.o gconf-objs := gconf.o zconf.tab.o -hostprogs-y := conf - -ifeq ($(MAKECMDGOALS),nconfig) - hostprogs-y += nconf -endif - -ifeq ($(MAKECMDGOALS),menuconfig) - hostprogs-y += mconf -endif - -ifeq ($(MAKECMDGOALS),update-po-config) - hostprogs-y += kxgettext -endif - -ifeq ($(MAKECMDGOALS),xconfig) - qconf-target := 1 -endif -ifeq ($(MAKECMDGOALS),gconfig) - gconf-target := 1 -endif - - -ifeq ($(qconf-target),1) - hostprogs-y += qconf -endif - -ifeq ($(gconf-target),1) - hostprogs-y += gconf -endif +hostprogs-y := conf nconf mconf kxgettext qconf gconf clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h -clean-files += mconf qconf gconf nconf clean-files += config.pot linux.pot # Check that we have the required ncurses stuff installed for lxdialog (menuconfig) @@ -239,11 +210,12 @@ HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \ HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) HOSTLOADLIBES_nconf = $(shell \ - pkg-config --libs menu panel ncurses 2>/dev/null \ + pkg-config --libs menuw panelw ncursesw 2>/dev/null \ + || pkg-config --libs menu panel ncurses 2>/dev/null \ || echo "-lmenu -lpanel -lncurses" ) $(obj)/qconf.o: $(obj)/.tmp_qtcheck -ifeq ($(qconf-target),1) +ifeq ($(MAKECMDGOALS),xconfig) $(obj)/.tmp_qtcheck: $(src)/Makefile -include $(obj)/.tmp_qtcheck @@ -300,7 +272,7 @@ endif $(obj)/gconf.o: $(obj)/.tmp_gtkcheck -ifeq ($(gconf-target),1) +ifeq ($(MAKECMDGOALS),gconfig) -include $(obj)/.tmp_gtkcheck # GTK needs some extra effort, too... diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh old mode 100644 new mode 100755 index 9d2a4c585ee1..5075ebf2d3b9 --- a/scripts/kconfig/lxdialog/check-lxdialog.sh +++ b/scripts/kconfig/lxdialog/check-lxdialog.sh @@ -21,7 +21,11 @@ ldflags() # Where is ncurses.h? ccflags() { - if [ -f /usr/include/ncursesw/curses.h ]; then + if pkg-config --cflags ncursesw 2>/dev/null; then + echo '-DCURSES_LOC="" -DNCURSES_WIDECHAR=1' + elif pkg-config --cflags ncurses 2>/dev/null; then + echo '-DCURSES_LOC=""' + elif [ -f /usr/include/ncursesw/curses.h ]; then echo '-I/usr/include/ncursesw -DCURSES_LOC=""' echo ' -DNCURSES_WIDECHAR=1' elif [ -f /usr/include/ncurses/ncurses.h ]; then diff --git a/scripts/kconfig/lxdialog/dialog.h b/scripts/kconfig/lxdialog/dialog.h index b4343d384926..fcffd5b41fb0 100644 --- a/scripts/kconfig/lxdialog/dialog.h +++ b/scripts/kconfig/lxdialog/dialog.h @@ -170,7 +170,7 @@ char item_tag(void); /* item list manipulation for lxdialog use */ #define MAXITEMSTR 200 struct dialog_item { - char str[MAXITEMSTR]; /* promtp displayed */ + char str[MAXITEMSTR]; /* prompt displayed */ char tag; void *data; /* pointer to menu item - used by menubox+checklist */ int selected; /* Set to 1 by dialog_*() function if selected. */ diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl old mode 100644 new mode 100755 diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh old mode 100644 new mode 100755 diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl old mode 100644 new mode 100755 diff --git a/scripts/mkmakefile b/scripts/mkmakefile old mode 100644 new mode 100755 diff --git a/scripts/mksysmap b/scripts/mksysmap old mode 100644 new mode 100755 diff --git a/scripts/package/builddeb b/scripts/package/builddeb old mode 100644 new mode 100755 diff --git a/scripts/package/buildtar b/scripts/package/buildtar old mode 100644 new mode 100755 diff --git a/scripts/profile2linkerlist.pl b/scripts/profile2linkerlist.pl old mode 100644 new mode 100755 diff --git a/scripts/rt-tester/rt-tester.py b/scripts/rt-tester/rt-tester.py old mode 100644 new mode 100755 diff --git a/scripts/selinux/install_policy.sh b/scripts/selinux/install_policy.sh old mode 100644 new mode 100755 diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py old mode 100644 new mode 100755 diff --git a/scripts/xz_wrap.sh b/scripts/xz_wrap.sh old mode 100644 new mode 100755