[ARM] Kirkwood: Add support for QNAP TS-41x Turbo NAS
Add support for the QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
This commit is contained in:
Martin Michlmayr
Nicolas Pitre
parent
2bf3010843
commit
f3a131b90b
|
|
@ -38,6 +38,13 @@ config MACH_TS219
|
|||
Say 'Y' here if you want your kernel to support the
|
||||
QNAP TS-119 and TS-219 Turbo NAS devices.
|
||||
|
||||
config MACH_TS41X
|
||||
bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
|
||||
devices.
|
||||
|
||||
config MACH_OPENRD_BASE
|
||||
bool "Marvell OpenRD Base Board"
|
||||
help
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@ obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
|
|||
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
|
||||
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
|
||||
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
|
||||
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o
|
||||
obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
|
||||
|
||||
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
|
||||
|
|
|
|||
253
arch/arm/mach-kirkwood/ts41x-setup.c
Normal file
253
arch/arm/mach-kirkwood/ts41x-setup.c
Normal file
|
|
@ -0,0 +1,253 @@
|
|||
/*
|
||||
*
|
||||
* QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
|
||||
*
|
||||
* Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
|
||||
* Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/spi/flash.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/orion_spi.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/serial_reg.h>
|
||||
#include <linux/pci.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <mach/kirkwood.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
/****************************************************************************
|
||||
* 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
|
||||
* partitions on the device because we want to keep compatability with
|
||||
* the QNAP firmware.
|
||||
* Layout as used by QNAP:
|
||||
* 0x00000000-0x00080000 : "U-Boot"
|
||||
* 0x00200000-0x00400000 : "Kernel"
|
||||
* 0x00400000-0x00d00000 : "RootFS"
|
||||
* 0x00d00000-0x01000000 : "RootFS2"
|
||||
* 0x00080000-0x000c0000 : "U-Boot Config"
|
||||
* 0x000c0000-0x00200000 : "NAS Config"
|
||||
*
|
||||
* We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
|
||||
* used by the QNAP TS-109/TS-209.
|
||||
*
|
||||
***************************************************************************/
|
||||
|
||||
static struct mtd_partition qnap_ts41x_partitions[] = {
|
||||
{
|
||||
.name = "U-Boot",
|
||||
.size = 0x00080000,
|
||||
.offset = 0,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
}, {
|
||||
.name = "Kernel",
|
||||
.size = 0x00200000,
|
||||
.offset = 0x00200000,
|
||||
}, {
|
||||
.name = "RootFS1",
|
||||
.size = 0x00900000,
|
||||
.offset = 0x00400000,
|
||||
}, {
|
||||
.name = "RootFS2",
|
||||
.size = 0x00300000,
|
||||
.offset = 0x00d00000,
|
||||
}, {
|
||||
.name = "U-Boot Config",
|
||||
.size = 0x00040000,
|
||||
.offset = 0x00080000,
|
||||
}, {
|
||||
.name = "NAS Config",
|
||||
.size = 0x00140000,
|
||||
.offset = 0x000c0000,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct flash_platform_data qnap_ts41x_flash = {
|
||||
.type = "m25p128",
|
||||
.name = "spi_flash",
|
||||
.parts = qnap_ts41x_partitions,
|
||||
.nr_parts = ARRAY_SIZE(qnap_ts41x_partitions),
|
||||
};
|
||||
|
||||
static struct spi_board_info __initdata qnap_ts41x_spi_slave_info[] = {
|
||||
{
|
||||
.modalias = "m25p80",
|
||||
.platform_data = &qnap_ts41x_flash,
|
||||
.irq = -1,
|
||||
.max_speed_hz = 20000000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
|
||||
I2C_BOARD_INFO("s35390a", 0x30),
|
||||
};
|
||||
|
||||
static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
||||
};
|
||||
|
||||
static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
|
||||
};
|
||||
|
||||
static struct mv_sata_platform_data qnap_ts41x_sata_data = {
|
||||
.n_ports = 2,
|
||||
};
|
||||
|
||||
static struct gpio_keys_button qnap_ts41x_buttons[] = {
|
||||
{
|
||||
.code = KEY_COPY,
|
||||
.gpio = 43,
|
||||
.desc = "USB Copy",
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.code = KEY_RESTART,
|
||||
.gpio = 37,
|
||||
.desc = "Reset",
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data qnap_ts41x_button_data = {
|
||||
.buttons = qnap_ts41x_buttons,
|
||||
.nbuttons = ARRAY_SIZE(qnap_ts41x_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device qnap_ts41x_button_device = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.num_resources = 0,
|
||||
.dev = {
|
||||
.platform_data = &qnap_ts41x_button_data,
|
||||
}
|
||||
};
|
||||
|
||||
static unsigned int qnap_ts41x_mpp_config[] __initdata = {
|
||||
MPP0_SPI_SCn,
|
||||
MPP1_SPI_MOSI,
|
||||
MPP2_SPI_SCK,
|
||||
MPP3_SPI_MISO,
|
||||
MPP6_SYSRST_OUTn,
|
||||
MPP7_PEX_RST_OUTn,
|
||||
MPP8_TW_SDA,
|
||||
MPP9_TW_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
MPP11_UART0_RXD,
|
||||
MPP13_UART1_TXD, /* PIC controller */
|
||||
MPP14_UART1_RXD, /* PIC controller */
|
||||
MPP15_SATA0_ACTn,
|
||||
MPP16_SATA1_ACTn,
|
||||
MPP20_GE1_0,
|
||||
MPP21_GE1_1,
|
||||
MPP22_GE1_2,
|
||||
MPP23_GE1_3,
|
||||
MPP24_GE1_4,
|
||||
MPP25_GE1_5,
|
||||
MPP26_GE1_6,
|
||||
MPP27_GE1_7,
|
||||
MPP30_GE1_10,
|
||||
MPP31_GE1_11,
|
||||
MPP32_GE1_12,
|
||||
MPP33_GE1_13,
|
||||
MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
|
||||
MPP37_GPIO, /* Reset button */
|
||||
MPP43_GPIO, /* USB Copy button */
|
||||
MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */
|
||||
MPP45_GPIO, /* JP1: 0: console, 1: LCD */
|
||||
MPP46_GPIO, /* External SATA HDD1 error indicator */
|
||||
MPP47_GPIO, /* External SATA HDD2 error indicator */
|
||||
MPP48_GPIO, /* External SATA HDD3 error indicator */
|
||||
MPP49_GPIO, /* External SATA HDD4 error indicator */
|
||||
0
|
||||
};
|
||||
|
||||
|
||||
/*****************************************************************************
|
||||
* QNAP TS-x19 specific power off method via UART1-attached PIC
|
||||
****************************************************************************/
|
||||
|
||||
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
|
||||
|
||||
void qnap_ts41x_power_off(void)
|
||||
{
|
||||
/* 19200 baud divisor */
|
||||
const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
|
||||
|
||||
pr_info("%s: triggering power-off...\n", __func__);
|
||||
|
||||
/* hijack UART1 and reset into sane state (19200,8n1) */
|
||||
writel(0x83, UART1_REG(LCR));
|
||||
writel(divisor & 0xff, UART1_REG(DLL));
|
||||
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
|
||||
writel(0x03, UART1_REG(LCR));
|
||||
writel(0x00, UART1_REG(IER));
|
||||
writel(0x00, UART1_REG(FCR));
|
||||
writel(0x00, UART1_REG(MCR));
|
||||
|
||||
/* send the power-off command 'A' to PIC */
|
||||
writel('A', UART1_REG(TX));
|
||||
}
|
||||
|
||||
static void __init qnap_ts41x_init(void)
|
||||
{
|
||||
/*
|
||||
* Basic setup. Needs to be called early.
|
||||
*/
|
||||
kirkwood_init();
|
||||
kirkwood_mpp_conf(qnap_ts41x_mpp_config);
|
||||
|
||||
kirkwood_uart0_init();
|
||||
kirkwood_uart1_init(); /* A PIC controller is connected here. */
|
||||
spi_register_board_info(qnap_ts41x_spi_slave_info,
|
||||
ARRAY_SIZE(qnap_ts41x_spi_slave_info));
|
||||
kirkwood_spi_init();
|
||||
kirkwood_i2c_init();
|
||||
i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
|
||||
kirkwood_ge00_init(&qnap_ts41x_ge00_data);
|
||||
kirkwood_ge01_init(&qnap_ts41x_ge01_data);
|
||||
kirkwood_sata_init(&qnap_ts41x_sata_data);
|
||||
kirkwood_ehci_init();
|
||||
platform_device_register(&qnap_ts41x_button_device);
|
||||
|
||||
pm_power_off = qnap_ts41x_power_off;
|
||||
|
||||
}
|
||||
|
||||
static int __init ts41x_pci_init(void)
|
||||
{
|
||||
if (machine_is_ts41x())
|
||||
kirkwood_pcie_init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
subsys_initcall(ts41x_pci_init);
|
||||
|
||||
MACHINE_START(TS41X, "QNAP TS-41x")
|
||||
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
|
||||
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
||||
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = 0x00000100,
|
||||
.init_machine = qnap_ts41x_init,
|
||||
.map_io = kirkwood_map_io,
|
||||
.init_irq = kirkwood_init_irq,
|
||||
.timer = &kirkwood_timer,
|
||||
MACHINE_END
|
||||
Loading…
Reference in a new issue