redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

Remove legacy CDROM drivers 

They are all broken beyond repair. Given that nobody has complained
about them (most haven't worked in 2.6 AT ALL), remove them from the
tree.

A new mitsumi driver that actually works is in progress, it'll get
added when completed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
hifive-unleashed-5.1
Jens Axboe 2007-06-21 08:29:34 +02:00
parent e654bc4393
commit f3f541f9de
23 changed files with 0 additions and 24847 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/Kconfig
View File

@ -24,8 +24,6 @@ source "drivers/scsi/Kconfig"
source "drivers/ata/Kconfig"
source "drivers/cdrom/Kconfig"
source "drivers/md/Kconfig"
source "drivers/message/fusion/Kconfig"

213
drivers/cdrom/Kconfig
View File

@ -1,213 +0,0 @@
#
# CDROM driver configuration
#
menu "Old CD-ROM drivers (not SCSI, not IDE)"
depends on ISA && BLOCK
config CD_NO_IDESCSI
bool "Support non-SCSI/IDE/ATAPI CDROM drives"
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about these CD-ROM drives. If you are unsure what you
have, say Y and find out whether you have one of the following
drives.
For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
exists. Especially in cases where you do not know exactly which kind
of drive you have you should read there. Most of these drivers use a
file drivers/cdrom/{driver_name}.h where you can define your
interface parameters and switch some internal goodies.
To compile these CD-ROM drivers as a module, choose M instead of Y.
If you want to use any of these CD-ROM drivers, you also have to
answer Y or M to "ISO 9660 CD-ROM file system support" below (this
answer will get "defaulted" for you if you enable any of the Linux
CD-ROM drivers).
config AZTCD
tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM CDROM support"
depends on CD_NO_IDESCSI
---help---
This is your driver if you have an Aztech CDA268-01A, Orchid
CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
CR540 CD-ROM drive. This driver -- just like all these CD-ROM
drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
as Aztech CDA269-031SE. Please read the file
<file:Documentation/cdrom/aztcd>.
If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
file system support" below, because that's the file system used on
CD-ROMs.
To compile this driver as a module, choose M here: the
module will be called aztcd.
config GSCD
tristate "Goldstar R420 CDROM support"
depends on CD_NO_IDESCSI
---help---
If this is your CD-ROM drive, say Y here. As described in the file
<file:Documentation/cdrom/gscd>, you might have to change a setting
in the file <file:drivers/cdrom/gscd.h> before compiling the
kernel. Please read the file <file:Documentation/cdrom/gscd>.
If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
file system support" below, because that's the file system used on
CD-ROMs.
To compile this driver as a module, choose M here: the
module will be called gscd.
config SBPCD
tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
This driver supports most of the drives which use the Panasonic or
Sound Blaster interface. Please read the file
<file:Documentation/cdrom/sbpcd>.
The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
(sometimes labeled "Creative"), the Creative Labs CD200, the
Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
model), the TEAC CD-55A fall under this category. Some other
"electrically compatible" drives (Vertos, Genoa, some Funai models)
are currently not supported; for the Sanyo H94A drive currently a
separate driver (asked later) is responsible. Most drives have a
uniquely shaped faceplate, with a caddyless motorized drawer, but
without external brand markings. The older CR-52x drives have a
caddy and manual loading/eject, but still no external markings. The
driver is able to do an extended auto-probing for interface
addresses and drive types; this can help to find facts in cases you
are not sure, but can consume some time during the boot process if
none of the supported drives gets found. Once your drive got found,
you should enter the reported parameters into
<file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
This driver can support up to four CD-ROM controller cards, and each
card can support up to four CD-ROM drives; if you say Y here, you
will be asked how many controller cards you have. If compiled as a
module, only one controller card (but with up to four drives) is
usable.
If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
file system support" below, because that's the file system used on
CD-ROMs.
To compile this driver as a module, choose M here: the
module will be called sbpcd.
config MCDX
tristate "Mitsumi CDROM support"
depends on CD_NO_IDESCSI
---help---
Use this driver if you want to be able to use your Mitsumi LU-005,
FX-001 or FX-001D CD-ROM drive.
Please read the file <file:Documentation/cdrom/mcdx>.
If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
file system support" below, because that's the file system used on
CD-ROMs.
To compile this driver as a module, choose M here: the
module will be called mcdx.
config OPTCD
tristate "Optics Storage DOLPHIN 8000AT CDROM support"
depends on CD_NO_IDESCSI
---help---
This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
compatible interface. It also works with the Lasermate CR328A. If
you have one of those, say Y. This driver does not work for the
Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
one. Please read the file <file:Documentation/cdrom/optcd>.
If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
file system support" below, because that's the file system used on
CD-ROMs.
To compile this driver as a module, choose M here: the
module will be called optcd.
config CM206
tristate "Philips/LMS CM206 CDROM support"
depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
If you have a Philips/LMS CD-ROM drive cm206 in combination with a
cm260 host adapter card, say Y here. Please also read the file
<file:Documentation/cdrom/cm206>.
If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
file system support" below, because that's the file system used on
CD-ROMs.
To compile this driver as a module, choose M here: the
module will be called cm206.
config SJCD
tristate "Sanyo CDR-H94A CDROM support"
depends on CD_NO_IDESCSI
help
If this is your CD-ROM drive, say Y here and read the file
<file:Documentation/cdrom/sjcd>. You should then also say Y or M to
"ISO 9660 CD-ROM file system support" below, because that's the
file system used on CD-ROMs.
To compile this driver as a module, choose M here: the
module will be called sjcd.
config ISP16_CDI
tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
depends on CD_NO_IDESCSI
---help---
These are sound cards with built-in cdrom interfaces using the OPTi
82C928 or 82C929 chips. Say Y here to have them detected and
possibly configured at boot time. In addition, You'll have to say Y
to a driver for the particular cdrom drive you have attached to the
card. Read <file:Documentation/cdrom/isp16> for details.
To compile this driver as a module, choose M here: the
module will be called isp16.
config CDU31A
tristate "Sony CDU31A/CDU33A CDROM support"
depends on CD_NO_IDESCSI && BROKEN_ON_SMP
---help---
These CD-ROM drives have a spring-pop-out caddyless drawer, and a
rectangular green LED centered beneath it. NOTE: these CD-ROM
drives will not be auto detected by the kernel at boot time; you
have to provide the interface address as an option to the kernel at
boot time as described in <file:Documentation/cdrom/cdu31a> or fill
in your parameters into <file:drivers/cdrom/cdu31a.c>. Try "man
bootparam" or see the documentation of your boot loader (lilo or
loadlin) about how to pass options to the kernel.
If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
file system support" below, because that's the file system used on
CD-ROMs.
To compile this driver as a module, choose M here: the
module will be called cdu31a.
config CDU535
tristate "Sony CDU535 CDROM support"
depends on CD_NO_IDESCSI
---help---
This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
drives. Please read the file <file:Documentation/cdrom/sonycd535>.
If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
file system support" below, because that's the file system used on
CD-ROMs.
To compile this driver as a module, choose M here: the
module will be called sonycd535.
endmenu

10
drivers/cdrom/Makefile
View File

@ -10,14 +10,4 @@ obj-$(CONFIG_BLK_DEV_SR) += cdrom.o
obj-$(CONFIG_PARIDE_PCD) += cdrom.o
obj-$(CONFIG_CDROM_PKTCDVD) += cdrom.o
obj-$(CONFIG_AZTCD) += aztcd.o
obj-$(CONFIG_CDU31A) += cdu31a.o cdrom.o
obj-$(CONFIG_CM206) += cm206.o cdrom.o
obj-$(CONFIG_GSCD) += gscd.o
obj-$(CONFIG_ISP16_CDI) += isp16.o
obj-$(CONFIG_MCDX) += mcdx.o cdrom.o
obj-$(CONFIG_OPTCD) += optcd.o
obj-$(CONFIG_SBPCD) += sbpcd.o cdrom.o
obj-$(CONFIG_SJCD) += sjcd.o
obj-$(CONFIG_CDU535) += sonycd535.o
obj-$(CONFIG_VIOCD) += viocd.o cdrom.o

2492
drivers/cdrom/aztcd.c
View File

File diff suppressed because it is too large Load Diff

162
drivers/cdrom/aztcd.h
View File

@ -1,162 +0,0 @@
/* $Id: aztcd.h,v 2.60 1997/11/29 09:51:22 root Exp root $
*
* Definitions for a AztechCD268 CD-ROM interface
* Copyright (C) 1994-98 Werner Zimmermann
*
* based on Mitsumi CDROM driver by Martin Harriss
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* History: W.Zimmermann adaption to Aztech CD268-01A Version 1.3
* October 1994 Email: Werner.Zimmermann@fht-esslingen.de
*/
/* *** change this to set the I/O port address of your CD-ROM drive,
set to '-1', if you want autoprobing */
#define AZT_BASE_ADDR -1
/* list of autoprobing addresses (not more than 15), last value must be 0x000
Note: Autoprobing is only enabled, if AZT_BASE_ADDR is set to '-1' ! */
#define AZT_BASE_AUTO { 0x320, 0x300, 0x310, 0x330, 0x000 }
/* Uncomment this, if your CDROM is connected to a Soundwave32-soundcard
and configure AZT_BASE_ADDR and AZT_SW32_BASE_ADDR */
/*#define AZT_SW32 1
*/
#ifdef AZT_SW32
#define AZT_SW32_BASE_ADDR 0x220 /*I/O port base address of your soundcard*/
#endif
/* Set this to 1, if you want your tray to be locked, set to 0 to prevent tray
from locking */
#define AZT_ALLOW_TRAY_LOCK 1
/*Set this to 1 to allow auto-eject when unmounting a disk, set to 0, if you
don't want the auto-eject feature*/
#define AZT_AUTO_EJECT 0
/*Set this to 1, if you want to use incompatible ioctls for reading in raw and
cooked mode */
#define AZT_PRIVATE_IOCTLS 1
/*Set this to 1, if you want multisession support by the ISO fs. Even if you set
this value to '0' you can use multisession CDs. In that case the drive's firm-
ware will do the appropriate redirection automatically. The CD will then look
like a single session CD (but nevertheless all data may be read). Please read
chapter '5.1 Multisession support' in README.aztcd for details. Normally it's
uncritical to leave this setting untouched */
#define AZT_MULTISESSION 1
/*Uncomment this, if you are using a linux kernel version prior to 2.1.0 */
/*#define AZT_KERNEL_PRIOR_2_1 */
/*---------------------------------------------------------------------------*/
/*-----nothing to be configured for normal applications below this line------*/
/* Increase this if you get lots of timeouts; if you get kernel panic, replace
STEN_LOW_WAIT by STEN_LOW in the source code */
#define AZT_STATUS_DELAY 400 /*for timer wait, STEN_LOW_WAIT*/
#define AZT_TIMEOUT 8000000 /*for busy wait STEN_LOW, DTEN_LOW*/
#define AZT_FAST_TIMEOUT 10000 /*for reading the version string*/
/* number of times to retry a command before giving up */
#define AZT_RETRY_ATTEMPTS 3
/* port access macros */
#define CMD_PORT azt_port
#define DATA_PORT azt_port
#define STATUS_PORT azt_port+1
#define MODE_PORT azt_port+2
#ifdef AZT_SW32
#define AZT_SW32_INIT (unsigned int) (0xFF00 & (AZT_BASE_ADDR*16))
#define AZT_SW32_CONFIG_REG AZT_SW32_BASE_ADDR+0x16 /*Soundwave32 Config. Register*/
#define AZT_SW32_ID_REG AZT_SW32_BASE_ADDR+0x04 /*Soundwave32 ID Version Register*/
#endif
/* status bits */
#define AST_CMD_CHECK 0x80 /* 1 = command error */
#define AST_DOOR_OPEN 0x40 /* 1 = door is open */
#define AST_NOT_READY 0x20 /* 1 = no disk in the drive */
#define AST_DSK_CHG 0x02 /* 1 = disk removed or changed */
#define AST_MODE 0x01 /* 0=MODE1, 1=MODE2 */
#define AST_MODE_BITS 0x1C /* Mode Bits */
#define AST_INITIAL 0x0C /* initial, only valid ... */
#define AST_BUSY 0x04 /* now playing, only valid
in combination with mode
bits */
/* flag bits */
#define AFL_DATA 0x02 /* data available if low */
#define AFL_STATUS 0x04 /* status available if low */
#define AFL_OP_OK 0x01 /* OP_OK command correct*/
#define AFL_PA_OK 0x02 /* PA_OK parameter correct*/
#define AFL_OP_ERR 0x05 /* error in command*/
#define AFL_PA_ERR 0x06 /* error in parameters*/
#define POLLED 0x04 /* polled mode */
/* commands */
#define ACMD_SOFT_RESET 0x10 /* reset drive */
#define ACMD_PLAY_READ 0x20 /* read data track in cooked mode */
#define ACMD_PLAY_READ_RAW 0x21 /* reading in raw mode*/
#define ACMD_SEEK 0x30 /* seek msf address*/
#define ACMD_SEEK_TO_LEADIN 0x31 /* seek to leadin track*/
#define ACMD_GET_ERROR 0x40 /* get error code */
#define ACMD_GET_STATUS 0x41 /* get status */
#define ACMD_GET_Q_CHANNEL 0x50 /* read info from q channel */
#define ACMD_EJECT 0x60 /* eject/open tray */
#define ACMD_CLOSE 0x61 /* close tray */
#define ACMD_LOCK 0x71 /* lock tray closed */
#define ACMD_UNLOCK 0x72 /* unlock tray */
#define ACMD_PAUSE 0x80 /* pause */
#define ACMD_STOP 0x81 /* stop play */
#define ACMD_PLAY_AUDIO 0x90 /* play audio track */
#define ACMD_SET_VOLUME 0x93 /* set audio level */
#define ACMD_GET_VERSION 0xA0 /* get firmware version */
#define ACMD_SET_DISK_TYPE 0xA1 /* set disk data mode */
#define MAX_TRACKS 104
struct msf {
unsigned char min;
unsigned char sec;
unsigned char frame;
};
struct azt_Play_msf {
struct msf start;
struct msf end;
};
struct azt_DiskInfo {
unsigned char first;
unsigned char next;
unsigned char last;
struct msf diskLength;
struct msf firstTrack;
unsigned char multi;
struct msf nextSession;
struct msf lastSession;
unsigned char xa;
unsigned char audio;
};
struct azt_Toc {
unsigned char ctrl_addr;
unsigned char track;
unsigned char pointIndex;
struct msf trackTime;
struct msf diskTime;
};

3251
drivers/cdrom/cdu31a.c
View File

File diff suppressed because it is too large Load Diff

411
drivers/cdrom/cdu31a.h
View File

@ -1,411 +0,0 @@
/*
* Definitions for a Sony interface CDROM drive.
*
* Corey Minyard (minyard@wf-rch.cirr.com)
*
* Copyright (C) 1993 Corey Minyard
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
/*
* General defines.
*/
#define SONY_XA_DISK_TYPE 0x20
/*
* Offsets (from the base address) and bits for the various write registers
* of the drive.
*/
#define SONY_CMD_REG_OFFSET 0
#define SONY_PARAM_REG_OFFSET 1
#define SONY_WRITE_REG_OFFSET 2
#define SONY_CONTROL_REG_OFFSET 3
# define SONY_ATTN_CLR_BIT 0x01
# define SONY_RES_RDY_CLR_BIT 0x02
# define SONY_DATA_RDY_CLR_BIT 0x04
# define SONY_ATTN_INT_EN_BIT 0x08
# define SONY_RES_RDY_INT_EN_BIT 0x10
# define SONY_DATA_RDY_INT_EN_BIT 0x20
# define SONY_PARAM_CLR_BIT 0x40
# define SONY_DRIVE_RESET_BIT 0x80
/*
* Offsets (from the base address) and bits for the various read registers
* of the drive.
*/
#define SONY_STATUS_REG_OFFSET 0
# define SONY_ATTN_BIT 0x01
# define SONY_RES_RDY_BIT 0x02
# define SONY_DATA_RDY_BIT 0x04
# define SONY_ATTN_INT_ST_BIT 0x08
# define SONY_RES_RDY_INT_ST_BIT 0x10
# define SONY_DATA_RDY_INT_ST_BIT 0x20
# define SONY_DATA_REQUEST_BIT 0x40
# define SONY_BUSY_BIT 0x80
#define SONY_RESULT_REG_OFFSET 1
#define SONY_READ_REG_OFFSET 2
#define SONY_FIFOST_REG_OFFSET 3
# define SONY_PARAM_WRITE_RDY_BIT 0x01
# define SONY_PARAM_REG_EMPTY_BIT 0x02
# define SONY_RES_REG_NOT_EMP_BIT 0x04
# define SONY_RES_REG_FULL_BIT 0x08
#define LOG_START_OFFSET 150 /* Offset of first logical sector */
#define SONY_DETECT_TIMEOUT (8*HZ/10) /* Maximum amount of time
that drive detection code
will wait for response
from drive (in 1/100th's
of seconds). */
#define SONY_JIFFIES_TIMEOUT (10*HZ) /* Maximum number of times the
drive will wait/try for an
operation */
#define SONY_RESET_TIMEOUT HZ /* Maximum number of times the
drive will wait/try a reset
operation */
#define SONY_READY_RETRIES 20000 /* How many times to retry a
spin waiting for a register
to come ready */
#define MAX_CDU31A_RETRIES 3 /* How many times to retry an
operation */
/* Commands to request or set drive control parameters and disc information */
#define SONY_REQ_DRIVE_CONFIG_CMD 0x00 /* Returns s_sony_drive_config */
#define SONY_REQ_DRIVE_MODE_CMD 0x01
#define SONY_REQ_DRIVE_PARAM_CMD 0x02
#define SONY_REQ_MECH_STATUS_CMD 0x03
#define SONY_REQ_AUDIO_STATUS_CMD 0x04
#define SONY_SET_DRIVE_PARAM_CMD 0x10
#define SONY_REQ_TOC_DATA_CMD 0x20 /* Returns s_sony_toc */
#define SONY_REQ_SUBCODE_ADDRESS_CMD 0x21 /* Returns s_sony_subcode */
#define SONY_REQ_UPC_EAN_CMD 0x22
#define SONY_REQ_ISRC_CMD 0x23
#define SONY_REQ_TOC_DATA_SPEC_CMD 0x24 /* Returns s_sony_session_toc */
/* Commands to request information from the drive */
#define SONY_READ_TOC_CMD 0x30 /* let the drive firmware grab the TOC */
#define SONY_SEEK_CMD 0x31
#define SONY_READ_CMD 0x32
#define SONY_READ_BLKERR_STAT_CMD 0x34
#define SONY_ABORT_CMD 0x35
#define SONY_READ_TOC_SPEC_CMD 0x36
/* Commands to control audio */
#define SONY_AUDIO_PLAYBACK_CMD 0x40
#define SONY_AUDIO_STOP_CMD 0x41
#define SONY_AUDIO_SCAN_CMD 0x42
/* Miscellaneous control commands */
#define SONY_EJECT_CMD 0x50
#define SONY_SPIN_UP_CMD 0x51
#define SONY_SPIN_DOWN_CMD 0x52
/* Diagnostic commands */
#define SONY_WRITE_BUFFER_CMD 0x60
#define SONY_READ_BUFFER_CMD 0x61
#define SONY_DIAGNOSTICS_CMD 0x62
/*
* The following are command parameters for the set drive parameter command
*/
#define SONY_SD_DECODE_PARAM 0x00
#define SONY_SD_INTERFACE_PARAM 0x01
#define SONY_SD_BUFFERING_PARAM 0x02
#define SONY_SD_AUDIO_PARAM 0x03
#define SONY_SD_AUDIO_VOLUME 0x04
#define SONY_SD_MECH_CONTROL 0x05
#define SONY_SD_AUTO_SPIN_DOWN_TIME 0x06
/*
* The following are parameter bits for the mechanical control command
*/
#define SONY_AUTO_SPIN_UP_BIT 0x01
#define SONY_AUTO_EJECT_BIT 0x02
#define SONY_DOUBLE_SPEED_BIT 0x04
/*
* The following extract information from the drive configuration about
* the drive itself.
*/
#define SONY_HWC_GET_LOAD_MECH(c) (c.hw_config[0] & 0x03)
#define SONY_HWC_EJECT(c) (c.hw_config[0] & 0x04)
#define SONY_HWC_LED_SUPPORT(c) (c.hw_config[0] & 0x08)
#define SONY_HWC_DOUBLE_SPEED(c) (c.hw_config[0] & 0x10)
#define SONY_HWC_GET_BUF_MEM_SIZE(c) ((c.hw_config[0] & 0xc0) >> 6)
#define SONY_HWC_AUDIO_PLAYBACK(c) (c.hw_config[1] & 0x01)
#define SONY_HWC_ELECTRIC_VOLUME(c) (c.hw_config[1] & 0x02)
#define SONY_HWC_ELECTRIC_VOLUME_CTL(c) (c.hw_config[1] & 0x04)
#define SONY_HWC_CADDY_LOAD_MECH 0x00
#define SONY_HWC_TRAY_LOAD_MECH 0x01
#define SONY_HWC_POPUP_LOAD_MECH 0x02
#define SONY_HWC_UNKWN_LOAD_MECH 0x03
#define SONY_HWC_8KB_BUFFER 0x00
#define SONY_HWC_32KB_BUFFER 0x01
#define SONY_HWC_64KB_BUFFER 0x02
#define SONY_HWC_UNKWN_BUFFER 0x03
/*
* This is the complete status returned from the drive configuration request
* command.
*/
struct s_sony_drive_config
{
unsigned char exec_status[2];
char vendor_id[8];
char product_id[16];
char product_rev_level[8];
unsigned char hw_config[2];
};
/* The following is returned from the request subcode address command */
struct s_sony_subcode
{
unsigned char exec_status[2];
unsigned char address :4;
unsigned char control :4;
unsigned char track_num;
unsigned char index_num;
unsigned char rel_msf[3];
unsigned char reserved1;
unsigned char abs_msf[3];
};
#define MAX_TRACKS 100 /* The maximum tracks a disk may have. */
/*
* The following is returned from the request TOC (Table Of Contents) command.
* (last_track_num-first_track_num+1) values are valid in tracks.
*/
struct s_sony_toc
{
unsigned char exec_status[2];
unsigned char address0 :4;
unsigned char control0 :4;
unsigned char point0;
unsigned char first_track_num;
unsigned char disk_type;
unsigned char dummy0;
unsigned char address1 :4;
unsigned char control1 :4;
unsigned char point1;
unsigned char last_track_num;
unsigned char dummy1;
unsigned char dummy2;
unsigned char address2 :4;
unsigned char control2 :4;
unsigned char point2;
unsigned char lead_out_start_msf[3];
struct
{
unsigned char address :4;
unsigned char control :4;
unsigned char track;
unsigned char track_start_msf[3];
} tracks[MAX_TRACKS];
unsigned int lead_out_start_lba;
};
struct s_sony_session_toc
{
unsigned char exec_status[2];
unsigned char session_number;
unsigned char address0 :4;
unsigned char control0 :4;
unsigned char point0;
unsigned char first_track_num;
unsigned char disk_type;
unsigned char dummy0;
unsigned char address1 :4;
unsigned char control1 :4;
unsigned char point1;
unsigned char last_track_num;
unsigned char dummy1;
unsigned char dummy2;
unsigned char address2 :4;
unsigned char control2 :4;
unsigned char point2;
unsigned char lead_out_start_msf[3];
unsigned char addressb0 :4;
unsigned char controlb0 :4;
unsigned char pointb0;
unsigned char next_poss_prog_area_msf[3];
unsigned char num_mode_5_pointers;
unsigned char max_start_outer_leadout_msf[3];
unsigned char addressb1 :4;
unsigned char controlb1 :4;
unsigned char pointb1;
unsigned char dummyb0_1[4];
unsigned char num_skip_interval_pointers;
unsigned char num_skip_track_assignments;
unsigned char dummyb0_2;
unsigned char addressb2 :4;
unsigned char controlb2 :4;
unsigned char pointb2;
unsigned char tracksb2[7];
unsigned char addressb3 :4;
unsigned char controlb3 :4;
unsigned char pointb3;
unsigned char tracksb3[7];
unsigned char addressb4 :4;
unsigned char controlb4 :4;
unsigned char pointb4;
unsigned char tracksb4[7];
unsigned char addressc0 :4;
unsigned char controlc0 :4;
unsigned char pointc0;
unsigned char dummyc0[7];
struct
{
unsigned char address :4;
unsigned char control :4;
unsigned char track;
unsigned char track_start_msf[3];
} tracks[MAX_TRACKS];
unsigned int start_track_lba;
unsigned int lead_out_start_lba;
unsigned int mint;
unsigned int maxt;
};
struct s_all_sessions_toc
{
unsigned char sessions;
unsigned int track_entries;
unsigned char first_track_num;
unsigned char last_track_num;
unsigned char disk_type;
unsigned char lead_out_start_msf[3];
struct
{
unsigned char address :4;
unsigned char control :4;
unsigned char track;
unsigned char track_start_msf[3];
} tracks[MAX_TRACKS];
unsigned int start_track_lba;
unsigned int lead_out_start_lba;
};
/*
* The following are errors returned from the drive.
*/
/* Command error group */
#define SONY_ILL_CMD_ERR 0x10
#define SONY_ILL_PARAM_ERR 0x11
/* Mechanism group */
#define SONY_NOT_LOAD_ERR 0x20
#define SONY_NO_DISK_ERR 0x21
#define SONY_NOT_SPIN_ERR 0x22
#define SONY_SPIN_ERR 0x23
#define SONY_SPINDLE_SERVO_ERR 0x25
#define SONY_FOCUS_SERVO_ERR 0x26
#define SONY_EJECT_MECH_ERR 0x29
#define SONY_AUDIO_PLAYING_ERR 0x2a
#define SONY_EMERGENCY_EJECT_ERR 0x2c
/* Seek error group */
#define SONY_FOCUS_ERR 0x30
#define SONY_FRAME_SYNC_ERR 0x31
#define SONY_SUBCODE_ADDR_ERR 0x32
#define SONY_BLOCK_SYNC_ERR 0x33
#define SONY_HEADER_ADDR_ERR 0x34
/* Read error group */
#define SONY_ILL_TRACK_R_ERR 0x40
#define SONY_MODE_0_R_ERR 0x41
#define SONY_ILL_MODE_R_ERR 0x42
#define SONY_ILL_BLOCK_SIZE_R_ERR 0x43
#define SONY_MODE_R_ERR 0x44
#define SONY_FORM_R_ERR 0x45
#define SONY_LEAD_OUT_R_ERR 0x46
#define SONY_BUFFER_OVERRUN_R_ERR 0x47
/* Data error group */
#define SONY_UNREC_CIRC_ERR 0x53
#define SONY_UNREC_LECC_ERR 0x57
/* Subcode error group */
#define SONY_NO_TOC_ERR 0x60
#define SONY_SUBCODE_DATA_NVAL_ERR 0x61
#define SONY_FOCUS_ON_TOC_READ_ERR 0x63
#define SONY_FRAME_SYNC_ON_TOC_READ_ERR 0x64
#define SONY_TOC_DATA_ERR 0x65
/* Hardware failure group */
#define SONY_HW_FAILURE_ERR 0x70
#define SONY_LEAD_IN_A_ERR 0x91
#define SONY_LEAD_OUT_A_ERR 0x92
#define SONY_DATA_TRACK_A_ERR 0x93
/*
* The following are returned from the Read With Block Error Status command.
* They are not errors but information (Errors from the 0x5x group above may
* also be returned
*/
#define SONY_NO_CIRC_ERR_BLK_STAT 0x50
#define SONY_NO_LECC_ERR_BLK_STAT 0x54
#define SONY_RECOV_LECC_ERR_BLK_STAT 0x55
#define SONY_NO_ERR_DETECTION_STAT 0x59
/*
* The following is not an error returned by the drive, but by the code
* that talks to the drive. It is returned because of a timeout.
*/
#define SONY_TIMEOUT_OP_ERR 0x01
#define SONY_SIGNAL_OP_ERR 0x02
#define SONY_BAD_DATA_ERR 0x03
/*
* The following are attention code for asynchronous events from the drive.
*/
/* Standard attention group */
#define SONY_EMER_EJECT_ATTN 0x2c
#define SONY_HW_FAILURE_ATTN 0x70
#define SONY_MECH_LOADED_ATTN 0x80
#define SONY_EJECT_PUSHED_ATTN 0x81
/* Audio attention group */
#define SONY_AUDIO_PLAY_DONE_ATTN 0x90
#define SONY_LEAD_IN_ERR_ATTN 0x91
#define SONY_LEAD_OUT_ERR_ATTN 0x92
#define SONY_DATA_TRACK_ERR_ATTN 0x93
#define SONY_AUDIO_PLAYBACK_ERR_ATTN 0x94
/* Auto spin up group */
#define SONY_SPIN_UP_COMPLETE_ATTN 0x24
#define SONY_SPINDLE_SERVO_ERR_ATTN 0x25
#define SONY_FOCUS_SERVO_ERR_ATTN 0x26
#define SONY_TOC_READ_DONE_ATTN 0x62
#define SONY_FOCUS_ON_TOC_READ_ERR_ATTN 0x63
#define SONY_SYNC_ON_TOC_READ_ERR_ATTN 0x65
/* Auto eject group */
#define SONY_SPIN_DOWN_COMPLETE_ATTN 0x27
#define SONY_EJECT_COMPLETE_ATTN 0x28
#define SONY_EJECT_MECH_ERR_ATTN 0x29

1594
drivers/cdrom/cm206.c
View File

File diff suppressed because it is too large Load Diff

171
drivers/cdrom/cm206.h
View File

@ -1,171 +0,0 @@
/* cm206.h Header file for cm206.c.
Copyright (c) 1995 David van Leeuwen
*/
#ifndef LINUX_CM206_H
#define LINUX_CM206_H
#include <linux/ioctl.h>
/* First, the cm260 stuff */
/* The ports and irq used. Although CM206_BASE and CM206_IRQ are defined
below, the values are not used unless autoprobing is turned off and
no LILO boot options or module command line options are given. Change
these values to your own as last resort if autoprobing and options
don't work. */
#define CM206_BASE 0x340
#define CM206_IRQ 11
#define r_data_status (cm206_base)
#define r_uart_receive (cm206_base+0x2)
#define r_fifo_output_buffer (cm206_base+0x4)
#define r_line_status (cm206_base+0x6)
#define r_data_control (cm206_base+0x8)
#define r_uart_transmit (cm206_base+0xa)
#define r_test_clock (cm206_base+0xc)
#define r_test_control (cm206_base+0xe)
/* the data_status flags */
#define ds_ram_size 0x4000
#define ds_toc_ready 0x2000
#define ds_fifo_empty 0x1000
#define ds_sync_error 0x800
#define ds_crc_error 0x400
#define ds_data_error 0x200
#define ds_fifo_overflow 0x100
#define ds_data_ready 0x80
/* the line_status flags */
#define ls_attention 0x10
#define ls_parity_error 0x8
#define ls_overrun 0x4
#define ls_receive_buffer_full 0x2
#define ls_transmitter_buffer_empty 0x1
/* the data control register flags */
#define dc_read_q_channel 0x4000
#define dc_mask_sync_error 0x2000
#define dc_toc_enable 0x1000
#define dc_no_stop_on_error 0x800
#define dc_break 0x400
#define dc_initialize 0x200
#define dc_mask_transmit_ready 0x100
#define dc_flag_enable 0x80
/* Define the default data control register flags here */
#define dc_normal (dc_mask_sync_error | dc_no_stop_on_error | \
dc_mask_transmit_ready)
/* now some constants related to the cm206 */
/* another drive status byte, echoed by the cm206 on most commands */
#define dsb_error_condition 0x1
#define dsb_play_in_progress 0x4
#define dsb_possible_media_change 0x8
#define dsb_disc_present 0x10
#define dsb_drive_not_ready 0x20
#define dsb_tray_locked 0x40
#define dsb_tray_not_closed 0x80
#define dsb_not_useful (dsb_drive_not_ready | dsb_tray_not_closed)
/* the cm206 command set */
#define c_close_tray 0
#define c_lock_tray 0x01
#define c_unlock_tray 0x04
#define c_open_tray 0x05
#define c_seek 0x10
#define c_read_data 0x20
#define c_force_1x 0x21
#define c_force_2x 0x22
#define c_auto_mode 0x23
#define c_play 0x30
#define c_set_audio_mode 0x31
#define c_read_current_q 0x41
#define c_stream_q 0x42
#define c_drive_status 0x50
#define c_disc_status 0x51
#define c_audio_status 0x52
#define c_drive_configuration 0x53
#define c_read_upc 0x60
#define c_stop 0x70
#define c_calc_checksum 0xe5
#define c_gimme 0xf8
/* finally, the (error) condition that the drive can be in *
* OK, this is not always an error, but let's prefix it with e_ */
#define e_none 0
#define e_illegal_command 0x01
#define e_sync 0x02
#define e_seek 0x03
#define e_parity 0x04
#define e_focus 0x05
#define e_header_sync 0x06
#define e_code_incompatibility 0x07
#define e_reset_done 0x08
#define e_bad_parameter 0x09
#define e_radial 0x0a
#define e_sub_code 0x0b
#define e_no_data_track 0x0c
#define e_scan 0x0d
#define e_tray_open 0x0f
#define e_no_disc 0x10
#define e_tray stalled 0x11
/* drive configuration masks */
#define dcf_revision_code 0x7
#define dcf_transfer_rate 0x60
#define dcf_motorized_tray 0x80
/* disc status byte */
#define cds_multi_session 0x2
#define cds_all_audio 0x8
#define cds_xa_mode 0xf0
/* finally some ioctls for the driver */
#define CM206CTL_GET_STAT _IO( 0x20, 0 )
#define CM206CTL_GET_LAST_STAT _IO( 0x20, 1 )
#ifdef STATISTICS
/* This is an ugly way to guarantee that the names of the statistics
* are the same in the code and in the diagnostics program. */
#ifdef __KERNEL__
#define x(a) st_ ## a
#define y enum
#else
#define x(a) #a
#define y char * stats_name[] =
#endif
y {x(interrupt), x(data_ready), x(fifo_overflow), x(data_error),
x(crc_error), x(sync_error), x(lost_intr), x(echo),
x(write_timeout), x(receive_timeout), x(read_timeout),
x(dsb_timeout), x(stop_0xff), x(back_read_timeout),
x(sector_transferred), x(read_restarted), x(read_background),
x(bh), x(open), x(ioctl_multisession), x(attention)
#ifdef __KERNEL__
, x(last_entry)
#endif
};
#ifdef __KERNEL__
#define NR_STATS st_last_entry
#else
#define NR_STATS (sizeof(stats_name)/sizeof(char*))
#endif
#undef y
#undef x
#endif /* STATISTICS */
#endif /* LINUX_CM206_H */

1029
drivers/cdrom/gscd.c
View File

File diff suppressed because it is too large Load Diff

108
drivers/cdrom/gscd.h
View File

@ -1,108 +0,0 @@
/*
* Definitions for a GoldStar R420 CD-ROM interface
*
* Copyright (C) 1995 Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>
* Eberhard Moenkeberg <emoenke@gwdg.de>
*
* Published under the GPL.
*
*/
/* The Interface Card default address is 0x340. This will work for most
applications. Address selection is accomplished by jumpers PN801-1 to
PN801-4 on the GoldStar Interface Card.
Appropriate settings are: 0x300, 0x310, 0x320, 0x330, 0x340, 0x350, 0x360
0x370, 0x380, 0x390, 0x3A0, 0x3B0, 0x3C0, 0x3D0, 0x3E0, 0x3F0 */
/* insert here the I/O port address and extent */
#define GSCD_BASE_ADDR 0x340
#define GSCD_IO_EXTENT 4
/************** nothing to set up below here *********************/
/* port access macro */
#define GSCDPORT(x) (gscd_port + (x))
/*
* commands
* the lower nibble holds the command length
*/
#define CMD_STATUS 0x01
#define CMD_READSUBQ 0x02 /* 1: ?, 2: UPC, 5: ? */
#define CMD_SEEK 0x05 /* read_mode M-S-F */
#define CMD_READ 0x07 /* read_mode M-S-F nsec_h nsec_l */
#define CMD_RESET 0x11
#define CMD_SETMODE 0x15
#define CMD_PLAY 0x17 /* M-S-F M-S-F */
#define CMD_LOCK_CTL 0x22 /* 0: unlock, 1: lock */
#define CMD_IDENT 0x31
#define CMD_SETSPEED 0x32 /* 0: auto */ /* ??? */
#define CMD_GETMODE 0x41
#define CMD_PAUSE 0x51
#define CMD_READTOC 0x61
#define CMD_DISKINFO 0x71
#define CMD_TRAY_CTL 0x81
/*
* disk_state:
*/
#define ST_PLAYING 0x80
#define ST_UNLOCKED 0x40
#define ST_NO_DISK 0x20
#define ST_DOOR_OPEN 0x10
#define ST_x08 0x08
#define ST_x04 0x04
#define ST_INVALID 0x02
#define ST_x01 0x01
/*
* cmd_type:
*/
#define TYPE_INFO 0x01
#define TYPE_DATA 0x02
/*
* read_mode:
*/
#define MOD_POLLED 0x80
#define MOD_x08 0x08
#define MOD_RAW 0x04
#define READ_DATA(port, buf, nr) insb(port, buf, nr)
#define SET_TIMER(func, jifs) \
((mod_timer(&gscd_timer, jiffies + jifs)), \
(gscd_timer.function = func))
#define CLEAR_TIMER del_timer_sync(&gscd_timer)
#define MAX_TRACKS 104
struct msf {
unsigned char min;
unsigned char sec;
unsigned char frame;
};
struct gscd_Play_msf {
struct msf start;
struct msf end;
};
struct gscd_DiskInfo {
unsigned char first;
unsigned char last;
struct msf diskLength;
struct msf firstTrack;
};
struct gscd_Toc {
unsigned char ctrl_addr;
unsigned char track;
unsigned char pointIndex;
struct msf trackTime;
struct msf diskTime;
};

374
drivers/cdrom/isp16.c
View File

@ -1,374 +0,0 @@
/* -- ISP16 cdrom detection and configuration
*
* Copyright (c) 1995,1996 Eric van der Maarel <H.T.M.v.d.Maarel@marin.nl>
*
* Version 0.6
*
* History:
* 0.5 First release.
* Was included in the sjcd and optcd cdrom drivers.
* 0.6 First "stand-alone" version.
* Removed sound configuration.
* Added "module" support.
*
* 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x
* Removed init_module & cleanup_module in favor of
* module_init & module_exit.
* Torben Mathiasen <tmm@image.dk>
*
* 19 June 2004 -- check_region() converted to request_region()
* and return statement cleanups.
* - Jesper Juhl
*
* Detect cdrom interface on ISP16 sound card.
* Configure cdrom interface.
*
* Algorithm for the card with OPTi 82C928 taken
* from the CDSETUP.SYS driver for MSDOS,
* by OPTi Computers, version 2.03.
* Algorithm for the card with OPTi 82C929 as communicated
* to me by Vadim Model and Leo Spiekman.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#define ISP16_VERSION_MAJOR 0
#define ISP16_VERSION_MINOR 6
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <asm/io.h>
#include "isp16.h"
static short isp16_detect(void);
static short isp16_c928__detect(void);
static short isp16_c929__detect(void);
static short isp16_cdi_config(int base, u_char drive_type, int irq,
int dma);
static short isp16_type; /* dependent on type of interface card */
static u_char isp16_ctrl;
static u_short isp16_enable_port;
static int isp16_cdrom_base = ISP16_CDROM_IO_BASE;
static int isp16_cdrom_irq = ISP16_CDROM_IRQ;
static int isp16_cdrom_dma = ISP16_CDROM_DMA;
static char *isp16_cdrom_type = ISP16_CDROM_TYPE;
module_param(isp16_cdrom_base, int, 0);
module_param(isp16_cdrom_irq, int, 0);
module_param(isp16_cdrom_dma, int, 0);
module_param(isp16_cdrom_type, charp, 0);
#define ISP16_IN(p) (outb(isp16_ctrl,ISP16_CTRL_PORT), inb(p))
#define ISP16_OUT(p,b) (outb(isp16_ctrl,ISP16_CTRL_PORT), outb(b,p))
#ifndef MODULE
static int
__init isp16_setup(char *str)
{
int ints[4];
(void) get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] > 0)
isp16_cdrom_base = ints[1];
if (ints[0] > 1)
isp16_cdrom_irq = ints[2];
if (ints[0] > 2)
isp16_cdrom_dma = ints[3];
if (str)
isp16_cdrom_type = str;
return 1;
}
__setup("isp16=", isp16_setup);
#endif /* MODULE */
/*
* ISP16 initialisation.
*
*/
static int __init isp16_init(void)
{
u_char expected_drive;
printk(KERN_INFO
"ISP16: configuration cdrom interface, version %d.%d.\n",
ISP16_VERSION_MAJOR, ISP16_VERSION_MINOR);
if (!strcmp(isp16_cdrom_type, "noisp16")) {
printk("ISP16: no cdrom interface configured.\n");
return 0;
}
if (!request_region(ISP16_IO_BASE, ISP16_IO_SIZE, "isp16")) {
printk("ISP16: i/o ports already in use.\n");
goto out;
}
if ((isp16_type = isp16_detect()) < 0) {
printk("ISP16: no cdrom interface found.\n");
goto cleanup_out;
}
printk(KERN_INFO
"ISP16: cdrom interface (with OPTi 82C92%d chip) detected.\n",
(isp16_type == 2) ? 9 : 8);
if (!strcmp(isp16_cdrom_type, "Sanyo"))
expected_drive =
(isp16_type ? ISP16_SANYO1 : ISP16_SANYO0);
else if (!strcmp(isp16_cdrom_type, "Sony"))
expected_drive = ISP16_SONY;
else if (!strcmp(isp16_cdrom_type, "Panasonic"))
expected_drive =
(isp16_type ? ISP16_PANASONIC1 : ISP16_PANASONIC0);
else if (!strcmp(isp16_cdrom_type, "Mitsumi"))
expected_drive = ISP16_MITSUMI;
else {
printk("ISP16: %s not supported by cdrom interface.\n",
isp16_cdrom_type);
goto cleanup_out;
}
if (isp16_cdi_config(isp16_cdrom_base, expected_drive,
isp16_cdrom_irq, isp16_cdrom_dma) < 0) {
printk
("ISP16: cdrom interface has not been properly configured.\n");
goto cleanup_out;
}
printk(KERN_INFO
"ISP16: cdrom interface set up with io base 0x%03X, irq %d, dma %d,"
" type %s.\n", isp16_cdrom_base, isp16_cdrom_irq,
isp16_cdrom_dma, isp16_cdrom_type);
return 0;
cleanup_out:
release_region(ISP16_IO_BASE, ISP16_IO_SIZE);
out:
return -EIO;
}
static short __init isp16_detect(void)
{
if (isp16_c929__detect() >= 0)
return 2;
else
return (isp16_c928__detect());
}
static short __init isp16_c928__detect(void)
{
u_char ctrl;
u_char enable_cdrom;
u_char io;
short i = -1;
isp16_ctrl = ISP16_C928__CTRL;
isp16_enable_port = ISP16_C928__ENABLE_PORT;
/* read' and write' are a special read and write, respectively */
/* read' ISP16_CTRL_PORT, clear last two bits and write' back the result */
ctrl = ISP16_IN(ISP16_CTRL_PORT) & 0xFC;
ISP16_OUT(ISP16_CTRL_PORT, ctrl);
/* read' 3,4 and 5-bit from the cdrom enable port */
enable_cdrom = ISP16_IN(ISP16_C928__ENABLE_PORT) & 0x38;
if (!(enable_cdrom & 0x20)) { /* 5-bit not set */
/* read' last 2 bits of ISP16_IO_SET_PORT */
io = ISP16_IN(ISP16_IO_SET_PORT) & 0x03;
if (((io & 0x01) << 1) == (io & 0x02)) { /* bits are the same */
if (io == 0) { /* ...the same and 0 */
i = 0;
enable_cdrom |= 0x20;
} else { /* ...the same and 1 *//* my card, first time 'round */
i = 1;
enable_cdrom |= 0x28;
}
ISP16_OUT(ISP16_C928__ENABLE_PORT, enable_cdrom);
} else { /* bits are not the same */
ISP16_OUT(ISP16_CTRL_PORT, ctrl);
return i; /* -> not detected: possibly incorrect conclusion */
}
} else if (enable_cdrom == 0x20)
i = 0;
else if (enable_cdrom == 0x28) /* my card, already initialised */
i = 1;
ISP16_OUT(ISP16_CTRL_PORT, ctrl);
return i;
}
static short __init isp16_c929__detect(void)
{
u_char ctrl;
u_char tmp;
isp16_ctrl = ISP16_C929__CTRL;
isp16_enable_port = ISP16_C929__ENABLE_PORT;
/* read' and write' are a special read and write, respectively */
/* read' ISP16_CTRL_PORT and save */
ctrl = ISP16_IN(ISP16_CTRL_PORT);
/* write' zero to the ctrl port and get response */
ISP16_OUT(ISP16_CTRL_PORT, 0);
tmp = ISP16_IN(ISP16_CTRL_PORT);
if (tmp != 2) /* isp16 with 82C929 not detected */
return -1;
/* restore ctrl port value */
ISP16_OUT(ISP16_CTRL_PORT, ctrl);
return 2;
}
static short __init
isp16_cdi_config(int base, u_char drive_type, int irq, int dma)
{
u_char base_code;
u_char irq_code;
u_char dma_code;
u_char i;
if ((drive_type == ISP16_MITSUMI) && (dma != 0))
printk("ISP16: Mitsumi cdrom drive has no dma support.\n");
switch (base) {
case 0x340:
base_code = ISP16_BASE_340;
break;
case 0x330:
base_code = ISP16_BASE_330;
break;
case 0x360:
base_code = ISP16_BASE_360;
break;
case 0x320:
base_code = ISP16_BASE_320;
break;
default:
printk
("ISP16: base address 0x%03X not supported by cdrom interface.\n",
base);
return -1;
}
switch (irq) {
case 0:
irq_code = ISP16_IRQ_X;
break; /* disable irq */
case 5:
irq_code = ISP16_IRQ_5;
printk("ISP16: irq 5 shouldn't be used by cdrom interface,"
" due to possible conflicts with the sound card.\n");
break;
case 7:
irq_code = ISP16_IRQ_7;
printk("ISP16: irq 7 shouldn't be used by cdrom interface,"
" due to possible conflicts with the sound card.\n");
break;
case 3:
irq_code = ISP16_IRQ_3;
break;
case 9:
irq_code = ISP16_IRQ_9;
break;
case 10:
irq_code = ISP16_IRQ_10;
break;
case 11:
irq_code = ISP16_IRQ_11;
break;
default:
printk("ISP16: irq %d not supported by cdrom interface.\n",
irq);
return -1;
}
switch (dma) {
case 0:
dma_code = ISP16_DMA_X;
break; /* disable dma */
case 1:
printk("ISP16: dma 1 cannot be used by cdrom interface,"
" due to conflict with the sound card.\n");
return -1;
break;
case 3:
dma_code = ISP16_DMA_3;
break;
case 5:
dma_code = ISP16_DMA_5;
break;
case 6:
dma_code = ISP16_DMA_6;
break;
case 7:
dma_code = ISP16_DMA_7;
break;
default:
printk("ISP16: dma %d not supported by cdrom interface.\n",
dma);
return -1;
}
if (drive_type != ISP16_SONY && drive_type != ISP16_PANASONIC0 &&
drive_type != ISP16_PANASONIC1 && drive_type != ISP16_SANYO0 &&
drive_type != ISP16_SANYO1 && drive_type != ISP16_MITSUMI &&
drive_type != ISP16_DRIVE_X) {
printk
("ISP16: drive type (code 0x%02X) not supported by cdrom"
" interface.\n", drive_type);
return -1;
}
/* set type of interface */
i = ISP16_IN(ISP16_DRIVE_SET_PORT) & ISP16_DRIVE_SET_MASK; /* clear some bits */
ISP16_OUT(ISP16_DRIVE_SET_PORT, i | drive_type);
/* enable cdrom on interface with 82C929 chip */
if (isp16_type > 1)
ISP16_OUT(isp16_enable_port, ISP16_ENABLE_CDROM);
/* set base address, irq and dma */
i = ISP16_IN(ISP16_IO_SET_PORT) & ISP16_IO_SET_MASK; /* keep some bits */
ISP16_OUT(ISP16_IO_SET_PORT, i | base_code | irq_code | dma_code);
return 0;
}
static void __exit isp16_exit(void)
{
release_region(ISP16_IO_BASE, ISP16_IO_SIZE);
printk(KERN_INFO "ISP16: module released.\n");
}
module_init(isp16_init);
module_exit(isp16_exit);
MODULE_LICENSE("GPL");

72
drivers/cdrom/isp16.h
View File

@ -1,72 +0,0 @@
/* -- isp16.h
*
* Header for detection and initialisation of cdrom interface (only) on
* ISP16 (MAD16, Mozart) sound card.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
/* These are the default values */
#define ISP16_CDROM_TYPE "Sanyo"
#define ISP16_CDROM_IO_BASE 0x340
#define ISP16_CDROM_IRQ 0
#define ISP16_CDROM_DMA 0
/* Some (Media)Magic */
/* define types of drive the interface on an ISP16 card may be looking at */
#define ISP16_DRIVE_X 0x00
#define ISP16_SONY 0x02
#define ISP16_PANASONIC0 0x02
#define ISP16_SANYO0 0x02
#define ISP16_MITSUMI 0x04
#define ISP16_PANASONIC1 0x06
#define ISP16_SANYO1 0x06
#define ISP16_DRIVE_NOT_USED 0x08 /* not used */
#define ISP16_DRIVE_SET_MASK 0xF1 /* don't change 0-bit or 4-7-bits*/
/* ...for port */
#define ISP16_DRIVE_SET_PORT 0xF8D
/* set io parameters */
#define ISP16_BASE_340 0x00
#define ISP16_BASE_330 0x40
#define ISP16_BASE_360 0x80
#define ISP16_BASE_320 0xC0
#define ISP16_IRQ_X 0x00
#define ISP16_IRQ_5 0x04 /* shouldn't be used to avoid sound card conflicts */
#define ISP16_IRQ_7 0x08 /* shouldn't be used to avoid sound card conflicts */
#define ISP16_IRQ_3 0x0C
#define ISP16_IRQ_9 0x10
#define ISP16_IRQ_10 0x14
#define ISP16_IRQ_11 0x18
#define ISP16_DMA_X 0x03
#define ISP16_DMA_3 0x00
#define ISP16_DMA_5 0x00
#define ISP16_DMA_6 0x01
#define ISP16_DMA_7 0x02
#define ISP16_IO_SET_MASK 0x20 /* don't change 5-bit */
/* ...for port */
#define ISP16_IO_SET_PORT 0xF8E
/* enable the card */
#define ISP16_C928__ENABLE_PORT 0xF90 /* ISP16 with OPTi 82C928 chip */
#define ISP16_C929__ENABLE_PORT 0xF91 /* ISP16 with OPTi 82C929 chip */
#define ISP16_ENABLE_CDROM 0x80 /* seven bit */
/* the magic stuff */
#define ISP16_CTRL_PORT 0xF8F
#define ISP16_C928__CTRL 0xE2 /* ISP16 with OPTi 82C928 chip */
#define ISP16_C929__CTRL 0xE3 /* ISP16 with OPTi 82C929 chip */
#define ISP16_IO_BASE 0xF8D
#define ISP16_IO_SIZE 5 /* ports used from 0xF8D up to 0xF91 */

1943
drivers/cdrom/mcdx.c
View File

File diff suppressed because it is too large Load Diff

185
drivers/cdrom/mcdx.h
View File

@ -1,185 +0,0 @@
/*
* Definitions for the Mitsumi CDROM interface
* Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de>
* VERSION: @VERSION@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Thanks to
* The Linux Community at all and ...
* Martin Harris (he wrote the first Mitsumi Driver)
* Eberhard Moenkeberg (he gave me much support and the initial kick)
* Bernd Huebner, Ruediger Helsch (Unifix-Software Gmbh, they
* improved the original driver)
* Jon Tombs, Bjorn Ekwall (module support)
* Daniel v. Mosnenck (he sent me the Technical and Programming Reference)
* Gerd Knorr (he lent me his PhotoCD)
* Nils Faerber and Roger E. Wolff (extensively tested the LU portion)
* Andreas Kies (testing the mysterious hang up's)
* ... somebody forgotten?
* Marcin Dalecki
*
*/
/*
* The following lines are for user configuration
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* {0|1} -- 1 if you want the driver detect your drive, may crash and
* needs a long time to seek. The higher the address the longer the
* seek.
*
* WARNING: AUTOPROBE doesn't work.
*/
#define MCDX_AUTOPROBE 0
/*
* Drive specific settings according to the jumpers on the controller
* board(s).
* o MCDX_NDRIVES : number of used entries of the following table
* o MCDX_DRIVEMAP : table of {i/o base, irq} per controller
*
* NOTE: I didn't get a drive at irq 9(2) working. Not even alone.
*/
#if MCDX_AUTOPROBE == 0
#define MCDX_NDRIVES 1
#define MCDX_DRIVEMAP { \
{0x300, 11}, \
{0x304, 05}, \
{0x000, 00}, \
{0x000, 00}, \
{0x000, 00}, \
}
#else
#error Autoprobing is not implemented yet.
#endif
#ifndef MCDX_QUIET
#define MCDX_QUIET 1
#endif
#ifndef MCDX_DEBUG
#define MCDX_DEBUG 0
#endif
/* *** make the following line uncommented, if you're sure,
* *** all configuration is done */
/* #define I_WAS_HERE */
/* The name of the device */
#define MCDX "mcdx"
/* Flags for DEBUGGING */
#define INIT 0
#define MALLOC 0
#define IOCTL 0
#define PLAYTRK 0
#define SUBCHNL 0
#define TOCHDR 0
#define MS 0
#define PLAYMSF 0
#define READTOC 0
#define OPENCLOSE 0
#define HW 0
#define TALK 0
#define IRQ 0
#define XFER 0
#define REQUEST 0
#define SLEEP 0
/* The following addresses are taken from the Mitsumi Reference
* and describe the possible i/o range for the controller.
*/
#define MCDX_IO_BEGIN ((char*) 0x300) /* first base of i/o addr */
#define MCDX_IO_END ((char*) 0x3fc) /* last base of i/o addr */
/* Per controller 4 bytes i/o are needed. */
#define MCDX_IO_SIZE 4
/*
* Bits
*/
/* The status byte, returned from every command, set if
* the description is true */
#define MCDX_RBIT_OPEN 0x80 /* door is open */
#define MCDX_RBIT_DISKSET 0x40 /* disk set (recognised) */
#define MCDX_RBIT_CHANGED 0x20 /* disk was changed */
#define MCDX_RBIT_CHECK 0x10 /* disk rotates, servo is on */
#define MCDX_RBIT_AUDIOTR 0x08 /* current track is audio */
#define MCDX_RBIT_RDERR 0x04 /* read error, refer SENSE KEY */
#define MCDX_RBIT_AUDIOBS 0x02 /* currently playing audio */
#define MCDX_RBIT_CMDERR 0x01 /* command, param or format error */
/* The I/O Register holding the h/w status of the drive,
* can be read at i/o base + 1 */
#define MCDX_RBIT_DOOR 0x10 /* door is open */
#define MCDX_RBIT_STEN 0x04 /* if 0, i/o base contains drive status */
#define MCDX_RBIT_DTEN 0x02 /* if 0, i/o base contains data */
/*
* The commands.
*/
#define OPCODE 1 /* offset of opcode */
#define MCDX_CMD_REQUEST_TOC 1, 0x10
#define MCDX_CMD_REQUEST_STATUS 1, 0x40
#define MCDX_CMD_RESET 1, 0x60
#define MCDX_CMD_REQUEST_DRIVE_MODE 1, 0xc2
#define MCDX_CMD_SET_INTERLEAVE 2, 0xc8, 0
#define MCDX_CMD_DATAMODE_SET 2, 0xa0, 0
#define MCDX_DATAMODE1 0x01
#define MCDX_DATAMODE2 0x02
#define MCDX_CMD_LOCK_DOOR 2, 0xfe, 0
#define READ_AHEAD 4 /* 8 Sectors (4K) */
/* Useful macros */
#define e_door(x) ((x) & MCDX_RBIT_OPEN)
#define e_check(x) (~(x) & MCDX_RBIT_CHECK)
#define e_notset(x) (~(x) & MCDX_RBIT_DISKSET)
#define e_changed(x) ((x) & MCDX_RBIT_CHANGED)
#define e_audio(x) ((x) & MCDX_RBIT_AUDIOTR)
#define e_audiobusy(x) ((x) & MCDX_RBIT_AUDIOBS)
#define e_cmderr(x) ((x) & MCDX_RBIT_CMDERR)
#define e_readerr(x) ((x) & MCDX_RBIT_RDERR)
/** no drive specific */
#define MCDX_CDBLK 2048 /* 2048 cooked data each blk */
#define MCDX_DATA_TIMEOUT (HZ/10) /* 0.1 second */
/*
* Access to the msf array
*/
#define MSF_MIN 0 /* minute */
#define MSF_SEC 1 /* second */
#define MSF_FRM 2 /* frame */
/*
* Errors
*/
#define MCDX_E 1 /* unspec error */
#define MCDX_ST_EOM 0x0100 /* end of media */
#define MCDX_ST_DRV 0x00ff /* mask to query the drive status */
#ifndef I_WAS_HERE
#ifndef MODULE
#warning You have not edited mcdx.h
#warning Perhaps irq and i/o settings are wrong.
#endif
#endif
/* ex:set ts=4 sw=4: */

2105
drivers/cdrom/optcd.c
View File

File diff suppressed because it is too large Load Diff

52
drivers/cdrom/optcd.h
View File

@ -1,52 +0,0 @@
/* linux/include/linux/optcd.h - Optics Storage 8000 AT CDROM driver
$Id: optcd.h,v 1.2 1996/01/15 18:43:44 root Exp root $
Copyright (C) 1995 Leo Spiekman (spiekman@dutette.et.tudelft.nl)
Configuration file for linux/drivers/cdrom/optcd.c
*/
#ifndef _LINUX_OPTCD_H
#define _LINUX_OPTCD_H
/* I/O base of drive. Drive uses base to base+2.
This setting can be overridden with the kernel or insmod command
line option 'optcd=<portbase>'. Use address of 0 to disable driver. */
#define OPTCD_PORTBASE 0x340
/* enable / disable parts of driver by define / undef */
#define MULTISESSION /* multisession support (ALPHA) */
/* Change 0 to 1 to debug various parts of the driver */
#define DEBUG_DRIVE_IF 0 /* Low level drive interface */
#define DEBUG_CONV 0 /* Address conversions */
#define DEBUG_BUFFERS 0 /* Buffering and block size conversion */
#define DEBUG_REQUEST 0 /* Request mechanism */
#define DEBUG_STATE 0 /* State machine */
#define DEBUG_TOC 0 /* Q-channel and Table of Contents */
#define DEBUG_MULTIS 0 /* Multisession code */
#define DEBUG_VFS 0 /* VFS interface */
/* Don't touch these unless you know what you're doing. */
/* Various timeout loop repetition counts. */
#define BUSY_TIMEOUT 10000000 /* for busy wait */
#define FAST_TIMEOUT 100000 /* ibid. for probing */
#define SLEEP_TIMEOUT 6000 /* for timer wait */
#define MULTI_SEEK_TIMEOUT 1000 /* for timer wait */
#define READ_TIMEOUT 6000 /* for poll wait */
#define STOP_TIMEOUT 2000 /* for poll wait */
#define RESET_WAIT 5000 /* busy wait at drive reset */
/* # of buffers for block size conversion. 6 is optimal for my setup (P75),
giving 280 kb/s, with 0.4% CPU usage. Experiment to find your optimal
setting */
#define N_BUFS 6
#endif /* _LINUX_OPTCD_H */

5966
drivers/cdrom/sbpcd.c
View File

File diff suppressed because it is too large Load Diff

839
drivers/cdrom/sbpcd.h
View File

@ -1,839 +0,0 @@
/*
* sbpcd.h Specify interface address and interface type here.
*/
/*
* Attention! This file contains user-serviceable parts!
* I recommend to make use of it...
* If you feel helpless, look into Documentation/cdrom/sbpcd
* (good idea anyway, at least before mailing me).
*
* The definitions for the first controller can get overridden by
* the kernel command line ("lilo boot option").
* Examples:
* sbpcd=0x300,LaserMate
* or
* sbpcd=0x230,SoundBlaster
* or
* sbpcd=0x338,SoundScape
* or
* sbpcd=0x2C0,Teac16bit
*
* If sbpcd gets used as a module, you can load it with
* insmod sbpcd.o sbpcd=0x300,0
* or
* insmod sbpcd.o sbpcd=0x230,1
* or
* insmod sbpcd.o sbpcd=0x338,2
* or
* insmod sbpcd.o sbpcd=0x2C0,3
* respective to override the configured address and type.
*/
/*
* define your CDROM port base address as CDROM_PORT
* and specify the type of your interface card as SBPRO.
*
* address:
* ========
* SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
* LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
* SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
* specify the REAL address here, not the configuration port address. Look
* at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
* sbpcd auto-probe, if you are not firm with the address.
* There are some soundcards on the market with 0x0630, 0x0650, ...; their
* type is not obvious (both types are possible).
*
* example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
* if your soundcard has its CDROM port above 0x300, specify
* that address and try SBPRO 0 first.
* if your SoundScape configuration port is at 0x330, specify
* 0x338 and SBPRO 2.
*
* interface type:
* ===============
* set SBPRO to 1 for "true" SoundBlaster card
* set SBPRO to 0 for "compatible" soundcards and
* for "poor" (no sound) interface cards.
* set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
* set SBPRO to 3 for Teac 16bit interface cards
*
* Almost all "compatible" sound boards need to set SBPRO to 0.
* If SBPRO is set wrong, the drives will get found - but any
* data access will give errors (audio access will work).
* The "OmniCD" no-sound interface card from CreativeLabs and most Teac
* interface cards need SBPRO 1.
*
* sound base:
* ===========
* The SOUND_BASE definition tells if we should try to turn the CD sound
* channels on. It will only be of use regarding soundcards with a SbPro
* compatible mixer.
*
* Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
* #define SOUND_BASE 0 leaves the soundcard untouched
*/
#define CDROM_PORT 0x340 /* <-----------<< port address */
#define SBPRO 0 /* <-----------<< interface type */
#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */
/*
* some more or less user dependent definitions - service them!
*/
/* Set this to 0 once you have configured your interface definitions right. */
#define DISTRIBUTION 1
/*
* Time to wait after giving a message.
* This gets important if you enable non-standard DBG_xxx flags.
* You will see what happens if you omit the pause or make it
* too short. Be warned!
*/
#define KLOGD_PAUSE 1
/* tray control: eject tray if no disk is in */
#if DISTRIBUTION
#define JUKEBOX 0
#else
#define JUKEBOX 1
#endif /* DISTRIBUTION */
/* tray control: eject tray after last use */
#if DISTRIBUTION
#define EJECT 0
#else
#define EJECT 1
#endif /* DISTRIBUTION */
/* max. number of audio frames to read with one */
/* request (allocates n* 2352 bytes kernel memory!) */
/* may be freely adjusted, f.e. 75 (= 1 sec.), at */
/* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */
#define READ_AUDIO 0
/* Optimizations for the Teac CD-55A drive read performance.
* SBP_TEAC_SPEED can be changed here, or one can set the
* variable "teac" when loading as a module.
* Valid settings are:
* 0 - very slow - the recommended "DISTRIBUTION 1" setup.
* 1 - 2x performance with little overhead. No busy waiting.
* 2 - 4x performance with 5ms overhead per read. Busy wait.
*
* Setting SBP_TEAC_SPEED or the variable 'teac' to anything
* other than 0 may cause problems. If you run into them, first
* change SBP_TEAC_SPEED back to 0 and see if your drive responds
* normally. If yes, you are "allowed" to report your case - to help
* me with the driver, not to solve your hassle. Don´t mail if you
* simply are stuck into your own "tuning" experiments, you know?
*/
#define SBP_TEAC_SPEED 1
/*==========================================================================*/
/*==========================================================================*/
/*
* nothing to change below here if you are not fully aware what you're doing
*/
#ifndef _LINUX_SBPCD_H
#define _LINUX_SBPCD_H
/*==========================================================================*/
/*==========================================================================*/
/*
* driver's own read_ahead, data mode
*/
#define SBP_BUFFER_FRAMES 8
#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
#undef FUTURE
#undef SAFE_MIXED
#define TEST_UPC 0
#define SPEA_TEST 0
#define TEST_STI 0
#define OLD_BUSY 0
#undef PATH_CHECK
#ifndef SOUND_BASE
#define SOUND_BASE 0
#endif
#if DISTRIBUTION
#undef SBP_TEAC_SPEED
#define SBP_TEAC_SPEED 0
#endif
/*==========================================================================*/
/*
* DDI interface definitions
* "invented" by Fred N. van Kempen..
*/
#define DDIOCSDBG 0x9000
/*==========================================================================*/
/*
* "private" IOCTL functions
*/
#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
/*==========================================================================*/
/*
* Debug output levels
*/
#define DBG_INF 1 /* necessary information */
#define DBG_BSZ 2 /* BLOCK_SIZE trace */
#define DBG_REA 3 /* READ status trace */
#define DBG_CHK 4 /* MEDIA CHECK trace */
#define DBG_TIM 5 /* datarate timer test */
#define DBG_INI 6 /* initialization trace */
#define DBG_TOC 7 /* tell TocEntry values */
#define DBG_IOC 8 /* ioctl trace */
#define DBG_STA 9 /* ResponseStatus() trace */
#define DBG_ERR 10 /* cc_ReadError() trace */
#define DBG_CMD 11 /* cmd_out() trace */
#define DBG_WRN 12 /* give explanation before auto-probing */
#define DBG_MUL 13 /* multi session code test */
#define DBG_IDX 14 /* test code for drive_id !=0 */
#define DBG_IOX 15 /* some special information */
#define DBG_DID 16 /* drive ID test */
#define DBG_RES 17 /* drive reset info */
#define DBG_SPI 18 /* SpinUp test */
#define DBG_IOS 19 /* ioctl trace: subchannel functions */
#define DBG_IO2 20 /* ioctl trace: general */
#define DBG_UPC 21 /* show UPC information */
#define DBG_XA1 22 /* XA mode debugging */
#define DBG_LCK 23 /* door (un)lock info */
#define DBG_SQ1 24 /* dump SubQ frame */
#define DBG_AUD 25 /* READ AUDIO debugging */
#define DBG_SEQ 26 /* Sequoia interface configuration trace */
#define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */
#define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */
#define DBG_TEA 29 /* TEAC CD-55A debugging trace */
#define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */
#define DBG_000 31 /* unnecessary information */
/*==========================================================================*/
/*==========================================================================*/
/*
* bits of flags_cmd_out:
*/
#define f_respo3 0x100
#define f_putcmd 0x80
#define f_respo2 0x40
#define f_lopsta 0x20
#define f_getsta 0x10
#define f_ResponseStatus 0x08
#define f_obey_p_check 0x04
#define f_bit1 0x02
#define f_wait_if_busy 0x01
/*
* diskstate_flags:
*/
#define x80_bit 0x80
#define upc_bit 0x40
#define volume_bit 0x20
#define toc_bit 0x10
#define multisession_bit 0x08
#define cd_size_bit 0x04
#define subq_bit 0x02
#define frame_size_bit 0x01
/*
* disk states (bits of diskstate_flags):
*/
#define upc_valid (current_drive->diskstate_flags&upc_bit)
#define volume_valid (current_drive->diskstate_flags&volume_bit)
#define toc_valid (current_drive->diskstate_flags&toc_bit)
#define cd_size_valid (current_drive->diskstate_flags&cd_size_bit)
#define subq_valid (current_drive->diskstate_flags&subq_bit)
#define frame_size_valid (current_drive->diskstate_flags&frame_size_bit)
/*
* the status_bits variable
*/
#define p_success 0x100
#define p_door_closed 0x80
#define p_caddy_in 0x40
#define p_spinning 0x20
#define p_check 0x10
#define p_busy_new 0x08
#define p_door_locked 0x04
#define p_disk_ok 0x01
/*
* LCS-7260 special status result bits:
*/
#define p_lcs_door_locked 0x02
#define p_lcs_door_closed 0x01 /* probably disk_in */
/*
* CR-52x special status result bits:
*/
#define p_caddin_old 0x40
#define p_success_old 0x08
#define p_busy_old 0x04
#define p_bit_1 0x02 /* hopefully unused now */
/*
* "generation specific" defs of the status result bits:
*/
#define p0_door_closed 0x80
#define p0_caddy_in 0x40
#define p0_spinning 0x20
#define p0_check 0x10
#define p0_success 0x08 /* unused */
#define p0_busy 0x04
#define p0_bit_1 0x02 /* unused */
#define p0_disk_ok 0x01
#define pL_disk_in 0x40
#define pL_spinning 0x20
#define pL_check 0x10
#define pL_success 0x08 /* unused ?? */
#define pL_busy 0x04
#define pL_door_locked 0x02
#define pL_door_closed 0x01
#define pV_door_closed 0x40
#define pV_spinning 0x20
#define pV_check 0x10
#define pV_success 0x08
#define pV_busy 0x04
#define pV_door_locked 0x02
#define pV_disk_ok 0x01
#define p1_door_closed 0x80
#define p1_disk_in 0x40
#define p1_spinning 0x20
#define p1_check 0x10
#define p1_busy 0x08
#define p1_door_locked 0x04
#define p1_bit_1 0x02 /* unused */
#define p1_disk_ok 0x01
#define p2_disk_ok 0x80
#define p2_door_locked 0x40
#define p2_spinning 0x20
#define p2_busy2 0x10
#define p2_busy1 0x08
#define p2_door_closed 0x04
#define p2_disk_in 0x02
#define p2_check 0x01
/*
* used drive states:
*/
#define st_door_closed (current_drive->status_bits&p_door_closed)
#define st_caddy_in (current_drive->status_bits&p_caddy_in)
#define st_spinning (current_drive->status_bits&p_spinning)
#define st_check (current_drive->status_bits&p_check)
#define st_busy (current_drive->status_bits&p_busy_new)
#define st_door_locked (current_drive->status_bits&p_door_locked)
#define st_diskok (current_drive->status_bits&p_disk_ok)
/*
* bits of the CDi_status register:
*/
#define s_not_result_ready 0x04 /* 0: "result ready" */
#define s_not_data_ready 0x02 /* 0: "data ready" */
#define s_attention 0x01 /* 1: "attention required" */
/*
* usable as:
*/
#define DRV_ATTN ((inb(CDi_status)&s_attention)!=0)
#define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0)
#define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0)
/*
* drive families and types (firmware versions):
*/
#define drv_fam0 0x0100 /* CR-52x family */
#define drv_199 (drv_fam0+0x01) /* <200 */
#define drv_200 (drv_fam0+0x02) /* <201 */
#define drv_201 (drv_fam0+0x03) /* <210 */
#define drv_210 (drv_fam0+0x04) /* <211 */
#define drv_211 (drv_fam0+0x05) /* <300 */
#define drv_300 (drv_fam0+0x06) /* >=300 */
#define drv_fam1 0x0200 /* CR-56x family */
#define drv_099 (drv_fam1+0x01) /* <100 */
#define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */
#define drv_fam2 0x0400 /* CD200 family */
#define drv_famT 0x0800 /* TEAC CD-55A */
#define drv_famL 0x1000 /* Longshine family */
#define drv_260 (drv_famL+0x01) /* LCS-7260 */
#define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */
#define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */
#define drv_famV 0x2000 /* ECS-AT (vertos-100) family */
#define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */
#define fam0_drive (current_drive->drv_type&drv_fam0)
#define famL_drive (current_drive->drv_type&drv_famL)
#define famV_drive (current_drive->drv_type&drv_famV)
#define fam1_drive (current_drive->drv_type&drv_fam1)
#define fam2_drive (current_drive->drv_type&drv_fam2)
#define famT_drive (current_drive->drv_type&drv_famT)
#define fam0L_drive (current_drive->drv_type&(drv_fam0|drv_famL))
#define fam0V_drive (current_drive->drv_type&(drv_fam0|drv_famV))
#define famLV_drive (current_drive->drv_type&(drv_famL|drv_famV))
#define fam0LV_drive (current_drive->drv_type&(drv_fam0|drv_famL|drv_famV))
#define fam1L_drive (current_drive->drv_type&(drv_fam1|drv_famL))
#define fam1V_drive (current_drive->drv_type&(drv_fam1|drv_famV))
#define fam1LV_drive (current_drive->drv_type&(drv_fam1|drv_famL|drv_famV))
#define fam01_drive (current_drive->drv_type&(drv_fam0|drv_fam1))
#define fam12_drive (current_drive->drv_type&(drv_fam1|drv_fam2))
#define fam2T_drive (current_drive->drv_type&(drv_fam2|drv_famT))
/*
* audio states:
*/
#define audio_completed 3 /* Forgot this one! --AJK */
#define audio_playing 2
#define audio_pausing 1
/*
* drv_pattern, drv_options:
*/
#define speed_auto 0x80
#define speed_300 0x40
#define speed_150 0x20
#define audio_mono 0x04
/*
* values of cmd_type (0 else):
*/
#define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */
#define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */
#define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */
#define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */
/*
* sense_byte:
*
* values: 00
* 01
* 81
* 82 "raw audio" mode
* xx from infobuf[0] after 85 00 00 00 00 00 00
*/
/* audio status (bin) */
#define aud_00 0x00 /* Audio status byte not supported or not valid */
#define audx11 0x0b /* Audio play operation in progress */
#define audx12 0x0c /* Audio play operation paused */
#define audx13 0x0d /* Audio play operation successfully completed */
#define audx14 0x0e /* Audio play operation stopped due to error */
#define audx15 0x0f /* No current audio status to return */
/* audio status (bcd) */
#define aud_11 0x11 /* Audio play operation in progress */
#define aud_12 0x12 /* Audio play operation paused */
#define aud_13 0x13 /* Audio play operation successfully completed */
#define aud_14 0x14 /* Audio play operation stopped due to error */
#define aud_15 0x15 /* No current audio status to return */
/*
* highest allowed drive number (MINOR+1)
*/
#define NR_SBPCD 4
/*
* we try to never disable interrupts - seems to work
*/
#define SBPCD_DIS_IRQ 0
/*
* "write byte to port"
*/
#define OUT(x,y) outb(y,x)
/*==========================================================================*/
#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
#define MIXER_data SOUND_BASE+5 /* sound card's data register */
#define MIXER_CD_Volume 0x28 /* internal SB Pro register address */
/*==========================================================================*/
#define MAX_TRACKS 99
#define ERR_DISKCHANGE 615
/*==========================================================================*/
/*
* To make conversions easier (machine dependent!)
*/
typedef union _msf
{
u_int n;
u_char c[4];
} MSF;
typedef union _blk
{
u_int n;
u_char c[4];
} BLK;
/*==========================================================================*/
/*============================================================================
==============================================================================
COMMAND SET of "old" drives like CR-521, CR-522
(the CR-562 family is different):
No. Command Code
--------------------------------------------
Drive Commands:
1 Seek 01
2 Read Data 02
3 Read XA-Data 03
4 Read Header 04
5 Spin Up 05
6 Spin Down 06
7 Diagnostic 07
8 Read UPC 08
9 Read ISRC 09
10 Play Audio 0A
11 Play Audio MSF 0B
12 Play Audio Track/Index 0C
Status Commands:
13 Read Status 81
14 Read Error 82
15 Read Drive Version 83
16 Mode Select 84
17 Mode Sense 85
18 Set XA Parameter 86
19 Read XA Parameter 87
20 Read Capacity 88
21 Read SUB_Q 89
22 Read Disc Code 8A
23 Read Disc Information 8B
24 Read TOC 8C
25 Pause/Resume 8D
26 Read Packet 8E
27 Read Path Check 00
all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
mnemo 7-byte command #bytes response (r0...rn)
________ ____________________ ____
Read Status:
status: 81. (1) one-byte command, gives the main
status byte
Read Error:
check1: 82 00 00 00 00 00 00. (6) r1: audio status
Read Packet:
check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating
to commands 01 04 05 07 08 09
Play Audio:
play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba),
nn-nn-nn: #blocks
Play Audio MSF:
0b mm-ss-ff mm-ss-ff (0) play audio from/to
Play Audio Track/Index:
0c ...
Pause/Resume:
pause: 8d pr 00 00 00 00 00. (0) pause (pr=00)
resume (pr=80) audio playing
Mode Select:
84 00 nn-nn ??.?? 00 (0) nn-nn: 2048 or 2340
possibly defines transfer size
set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1)
le(vel): min=0, max=FF, else half
(firmware 2.11)
Mode Sense:
get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting
Read Disc Information:
tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format)
Read TOC:
tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn
(fl=0:"lba"-, =2:"msf-bin"-format)
Read Capacity:
capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity"
Read Path Check:
ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55
("ping" if the drive is connected)
Read Drive Version:
ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn"
(n.nn = 2.01, 2.11., 3.00, ...)
Seek:
seek: 01 00 ll-bb-aa 00 00. (0)
seek: 01 02 mm-ss-ff 00 00. (0)
Read Data:
read: 02 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2048 bytes,
starting at block xx-xx-xx
fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
Read XA-Data:
read: 03 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2340 bytes,
starting at block xx-xx-xx
fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
Read SUB_Q:
89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf,
fl=0: "lba", fl=2: "msf"
Read Disc Code:
8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info
Read Header:
04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2"
04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2"
Spin Up:
05 00 ll-bb-aa 00 00. (0) possibly implies a "seek"
Spin Down:
06 ...
Diagnostic:
07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2"
07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2"
Read UPC:
08 00 ll-bb-aa 00 00. (16)
08 02 mm-ss-ff 00 00. (16)
Read ISRC:
09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2"
09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2"
Set XA Parameter:
86 ...
Read XA Parameter:
87 ...
==============================================================================
============================================================================*/
/*
* commands
*
* CR-52x: CMD0_
* CR-56x: CMD1_
* CD200: CMD2_
* LCS-7260: CMDL_
* TEAC CD-55A: CMDT_
* ECS-AT: CMDV_
*/
#define CMD1_RESET 0x0a
#define CMD2_RESET 0x01
#define CMDT_RESET 0xc0
#define CMD1_LOCK_CTL 0x0c
#define CMD2_LOCK_CTL 0x1e
#define CMDT_LOCK_CTL CMD2_LOCK_CTL
#define CMDL_LOCK_CTL 0x0e
#define CMDV_LOCK_CTL CMDL_LOCK_CTL
#define CMD1_TRAY_CTL 0x07
#define CMD2_TRAY_CTL 0x1b
#define CMDT_TRAY_CTL CMD2_TRAY_CTL
#define CMDL_TRAY_CTL 0x0d
#define CMDV_TRAY_CTL CMDL_TRAY_CTL
#define CMD1_MULTISESS 0x8d
#define CMDL_MULTISESS 0x8c
#define CMDV_MULTISESS CMDL_MULTISESS
#define CMD1_SUBCHANINF 0x11
#define CMD2_SUBCHANINF 0x??
#define CMD1_ABORT 0x08
#define CMD2_ABORT 0x08
#define CMDT_ABORT 0x08
#define CMD2_x02 0x02
#define CMD2_SETSPEED 0xda
#define CMD0_PATH_CHECK 0x00
#define CMD1_PATH_CHECK 0x???
#define CMD2_PATH_CHECK 0x???
#define CMDT_PATH_CHECK 0x???
#define CMDL_PATH_CHECK CMD0_PATH_CHECK
#define CMDV_PATH_CHECK CMD0_PATH_CHECK
#define CMD0_SEEK 0x01
#define CMD1_SEEK CMD0_SEEK
#define CMD2_SEEK 0x2b
#define CMDT_SEEK CMD2_SEEK
#define CMDL_SEEK CMD0_SEEK
#define CMDV_SEEK CMD0_SEEK
#define CMD0_READ 0x02
#define CMD1_READ 0x10
#define CMD2_READ 0x28
#define CMDT_READ CMD2_READ
#define CMDL_READ CMD0_READ
#define CMDV_READ CMD0_READ
#define CMD0_READ_XA 0x03
#define CMD2_READ_XA 0xd4
#define CMD2_READ_XA2 0xd5
#define CMDL_READ_XA CMD0_READ_XA /* really ?? */
#define CMDV_READ_XA CMD0_READ_XA
#define CMD0_READ_HEAD 0x04
#define CMD0_SPINUP 0x05
#define CMD1_SPINUP 0x02
#define CMD2_SPINUP CMD2_TRAY_CTL
#define CMDL_SPINUP CMD0_SPINUP
#define CMDV_SPINUP CMD0_SPINUP
#define CMD0_SPINDOWN 0x06 /* really??? */
#define CMD1_SPINDOWN 0x06
#define CMD2_SPINDOWN CMD2_TRAY_CTL
#define CMDL_SPINDOWN 0x0d
#define CMDV_SPINDOWN CMD0_SPINDOWN
#define CMD0_DIAG 0x07
#define CMD0_READ_UPC 0x08
#define CMD1_READ_UPC 0x88
#define CMD2_READ_UPC 0x???
#define CMDL_READ_UPC CMD0_READ_UPC
#define CMDV_READ_UPC 0x8f
#define CMD0_READ_ISRC 0x09
#define CMD0_PLAY 0x0a
#define CMD1_PLAY 0x???
#define CMD2_PLAY 0x???
#define CMDL_PLAY CMD0_PLAY
#define CMDV_PLAY CMD0_PLAY
#define CMD0_PLAY_MSF 0x0b
#define CMD1_PLAY_MSF 0x0e
#define CMD2_PLAY_MSF 0x47
#define CMDT_PLAY_MSF CMD2_PLAY_MSF
#define CMDL_PLAY_MSF 0x???
#define CMD0_PLAY_TI 0x0c
#define CMD1_PLAY_TI 0x0f
#define CMD0_STATUS 0x81
#define CMD1_STATUS 0x05
#define CMD2_STATUS 0x00
#define CMDT_STATUS CMD2_STATUS
#define CMDL_STATUS CMD0_STATUS
#define CMDV_STATUS CMD0_STATUS
#define CMD2_SEEK_LEADIN 0x00
#define CMD0_READ_ERR 0x82
#define CMD1_READ_ERR CMD0_READ_ERR
#define CMD2_READ_ERR 0x03
#define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */
#define CMDL_READ_ERR CMD0_READ_ERR
#define CMDV_READ_ERR CMD0_READ_ERR
#define CMD0_READ_VER 0x83
#define CMD1_READ_VER CMD0_READ_VER
#define CMD2_READ_VER 0x12
#define CMDT_READ_VER CMD2_READ_VER /* really ?? */
#define CMDL_READ_VER CMD0_READ_VER
#define CMDV_READ_VER CMD0_READ_VER
#define CMD0_SETMODE 0x84
#define CMD1_SETMODE 0x09
#define CMD2_SETMODE 0x55
#define CMDT_SETMODE CMD2_SETMODE
#define CMDL_SETMODE CMD0_SETMODE
#define CMD0_GETMODE 0x85
#define CMD1_GETMODE 0x84
#define CMD2_GETMODE 0x5a
#define CMDT_GETMODE CMD2_GETMODE
#define CMDL_GETMODE CMD0_GETMODE
#define CMD0_SET_XA 0x86
#define CMD0_GET_XA 0x87
#define CMD0_CAPACITY 0x88
#define CMD1_CAPACITY 0x85
#define CMD2_CAPACITY 0x25
#define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */
#define CMD0_READSUBQ 0x89
#define CMD1_READSUBQ 0x87
#define CMD2_READSUBQ 0x42
#define CMDT_READSUBQ CMD2_READSUBQ
#define CMDL_READSUBQ CMD0_READSUBQ
#define CMDV_READSUBQ CMD0_READSUBQ
#define CMD0_DISKCODE 0x8a
#define CMD0_DISKINFO 0x8b
#define CMD1_DISKINFO CMD0_DISKINFO
#define CMD2_DISKINFO 0x43
#define CMDT_DISKINFO CMD2_DISKINFO
#define CMDL_DISKINFO CMD0_DISKINFO
#define CMDV_DISKINFO CMD0_DISKINFO
#define CMD0_READTOC 0x8c
#define CMD1_READTOC CMD0_READTOC
#define CMD2_READTOC 0x???
#define CMDL_READTOC CMD0_READTOC
#define CMDV_READTOC CMD0_READTOC
#define CMD0_PAU_RES 0x8d
#define CMD1_PAU_RES 0x0d
#define CMD2_PAU_RES 0x4b
#define CMDT_PAUSE CMD2_PAU_RES
#define CMDL_PAU_RES CMD0_PAU_RES
#define CMDV_PAUSE CMD0_PAU_RES
#define CMD0_PACKET 0x8e
#define CMD1_PACKET CMD0_PACKET
#define CMD2_PACKET 0x???
#define CMDL_PACKET CMD0_PACKET
#define CMDV_PACKET 0x???
/*==========================================================================*/
/*==========================================================================*/
#endif /* _LINUX_SBPCD_H */
/*==========================================================================*/
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
* adjust the settings for this buffer only. This must remain at the end
* of the file.
* ---------------------------------------------------------------------------
* Local variables:
* c-indent-level: 8
* c-brace-imaginary-offset: 0
* c-brace-offset: -8
* c-argdecl-indent: 8
* c-label-offset: -8
* c-continued-statement-offset: 8
* c-continued-brace-offset: 0
* End:
*/

1815
drivers/cdrom/sjcd.c
View File

File diff suppressed because it is too large Load Diff

181
drivers/cdrom/sjcd.h
View File

@ -1,181 +0,0 @@
/*
* Definitions for a Sanyo CD-ROM interface.
*
* Copyright (C) 1995 Vadim V. Model
* model@cecmow.enet.dec.com
* vadim@rbrf.msk.su
* vadim@ipsun.ras.ru
* Eric van der Maarel
* H.T.M.v.d.Maarel@marin.nl
*
* This information is based on mcd.c from M. Harriss and sjcd102.lst from
* E. Moenkeberg.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __SJCD_H__
#define __SJCD_H__
/*
* Change this to set the I/O port address as default. More flexibility
* come with setup implementation.
*/
#define SJCD_BASE_ADDR 0x340
/*
* Change this to set the irq as default. Really SANYO do not use interrupts
* at all.
*/
#define SJCD_INTR_NR 0
/*
* Change this to set the dma as default value. really SANYO does not use
* direct memory access at all.
*/
#define SJCD_DMA_NR 0
/*
* Macros which allow us to find out the status of the drive.
*/
#define SJCD_STATUS_AVAILABLE( x ) (((x)&0x02)==0)
#define SJCD_DATA_AVAILABLE( x ) (((x)&0x01)==0)
/*
* Port access macro. Three ports are available: S-data port (command port),
* status port (read only) and D-data port (read only).
*/
#define SJCDPORT( x ) ( sjcd_base + ( x ) )
#define SJCD_STATUS_PORT SJCDPORT( 1 )
#define SJCD_S_DATA_PORT SJCDPORT( 0 )
#define SJCD_COMMAND_PORT SJCDPORT( 0 )
#define SJCD_D_DATA_PORT SJCDPORT( 2 )
/*
* Drive info bits. Drive info available as first (mandatory) byte of
* command completion status.
*/
#define SST_NOT_READY 0x10 /* no disk in the drive (???) */
#define SST_MEDIA_CHANGED 0x20 /* disk is changed */
#define SST_DOOR_OPENED 0x40 /* door is open */
/* commands */
#define SCMD_EJECT_TRAY 0xD0 /* eject tray if not locked */
#define SCMD_LOCK_TRAY 0xD2 /* lock tray when in */
#define SCMD_UNLOCK_TRAY 0xD4 /* unlock tray when in */
#define SCMD_CLOSE_TRAY 0xD6 /* load tray in */
#define SCMD_RESET 0xFA /* soft reset */
#define SCMD_GET_STATUS 0x80
#define SCMD_GET_VERSION 0xCC
#define SCMD_DATA_READ 0xA0 /* are the same, depend on mode&args */
#define SCMD_SEEK 0xA0
#define SCMD_PLAY 0xA0
#define SCMD_GET_QINFO 0xA8
#define SCMD_SET_MODE 0xC4
#define SCMD_MODE_PLAY 0xE0
#define SCMD_MODE_COOKED (0xF8 & ~0x20)
#define SCMD_MODE_RAW 0xF9
#define SCMD_MODE_x20_BIT 0x20 /* What is it for ? */
#define SCMD_SET_VOLUME 0xAE
#define SCMD_PAUSE 0xE0
#define SCMD_STOP 0xE0
#define SCMD_GET_DISK_INFO 0xAA
/*
* Some standard arguments for SCMD_GET_DISK_INFO.
*/
#define SCMD_GET_1_TRACK 0xA0 /* get the first track information */
#define SCMD_GET_L_TRACK 0xA1 /* get the last track information */
#define SCMD_GET_D_SIZE 0xA2 /* get the whole disk information */
/*
* Borrowed from hd.c. Allows to optimize multiple port read commands.
*/
#define S_READ_DATA( port, buf, nr ) insb( port, buf, nr )
/*
* We assume that there are no audio disks with TOC length more than this
* number (I personally have never seen disks with more than 20 fragments).
*/
#define SJCD_MAX_TRACKS 100
struct msf {
unsigned char min;
unsigned char sec;
unsigned char frame;
};
struct sjcd_hw_disk_info {
unsigned char track_control;
unsigned char track_no;
unsigned char x, y, z;
union {
unsigned char track_no;
struct msf track_msf;
} un;
};
struct sjcd_hw_qinfo {
unsigned char track_control;
unsigned char track_no;
unsigned char x;
struct msf rel;
struct msf abs;
};
struct sjcd_play_msf {
struct msf start;
struct msf end;
};
struct sjcd_disk_info {
unsigned char first;
unsigned char last;
struct msf disk_length;
struct msf first_track;
};
struct sjcd_toc {
unsigned char ctrl_addr;
unsigned char track;
unsigned char point_index;
struct msf track_time;
struct msf disk_time;
};
#if defined( SJCD_GATHER_STAT )
struct sjcd_stat {
int ticks;
int tticks[ 8 ];
int idle_ticks;
int start_ticks;
int mode_ticks;
int read_ticks;
int data_ticks;
int stop_ticks;
int stopping_ticks;
};
#endif
#endif

1689
drivers/cdrom/sonycd535.c
View File

File diff suppressed because it is too large Load Diff

183
drivers/cdrom/sonycd535.h
View File

@ -1,183 +0,0 @@
#ifndef SONYCD535_H
#define SONYCD535_H
/*
* define all the commands recognized by the CDU-531/5
*/
#define SONY535_REQUEST_DRIVE_STATUS_1 (0x80)
#define SONY535_REQUEST_SENSE (0x82)
#define SONY535_REQUEST_DRIVE_STATUS_2 (0x84)
#define SONY535_REQUEST_ERROR_STATUS (0x86)
#define SONY535_REQUEST_AUDIO_STATUS (0x88)
#define SONY535_INQUIRY (0x8a)
#define SONY535_SET_INACTIVITY_TIME (0x90)
#define SONY535_SEEK_AND_READ_N_BLOCKS_1 (0xa0)
#define SONY535_SEEK_AND_READ_N_BLOCKS_2 (0xa4)
#define SONY535_PLAY_AUDIO (0xa6)
#define SONY535_REQUEST_DISC_CAPACITY (0xb0)
#define SONY535_REQUEST_TOC_DATA (0xb2)
#define SONY535_REQUEST_SUB_Q_DATA (0xb4)
#define SONY535_REQUEST_ISRC (0xb6)
#define SONY535_REQUEST_UPC_EAN (0xb8)
#define SONY535_SET_DRIVE_MODE (0xc0)
#define SONY535_REQUEST_DRIVE_MODE (0xc2)
#define SONY535_SET_RETRY_COUNT (0xc4)
#define SONY535_DIAGNOSTIC_1 (0xc6)
#define SONY535_DIAGNOSTIC_4 (0xcc)
#define SONY535_DIAGNOSTIC_5 (0xce)
#define SONY535_EJECT_CADDY (0xd0)
#define SONY535_DISABLE_EJECT_BUTTON (0xd2)
#define SONY535_ENABLE_EJECT_BUTTON (0xd4)
#define SONY535_HOLD (0xe0)
#define SONY535_AUDIO_PAUSE_ON_OFF (0xe2)
#define SONY535_SET_VOLUME (0xe8)
#define SONY535_STOP (0xf0)
#define SONY535_SPIN_UP (0xf2)
#define SONY535_SPIN_DOWN (0xf4)
#define SONY535_CLEAR_PARAMETERS (0xf6)
#define SONY535_CLEAR_ENDING_ADDRESS (0xf8)
/*
* define some masks
*/
#define SONY535_DATA_NOT_READY_BIT (0x1)
#define SONY535_RESULT_NOT_READY_BIT (0x2)
/*
* drive status 1
*/
#define SONY535_STATUS1_COMMAND_ERROR (0x1)
#define SONY535_STATUS1_DATA_ERROR (0x2)
#define SONY535_STATUS1_SEEK_ERROR (0x4)
#define SONY535_STATUS1_DISC_TYPE_ERROR (0x8)
#define SONY535_STATUS1_NOT_SPINNING (0x10)
#define SONY535_STATUS1_EJECT_BUTTON_PRESSED (0x20)
#define SONY535_STATUS1_CADDY_NOT_INSERTED (0x40)
#define SONY535_STATUS1_BYTE_TWO_FOLLOWS (0x80)
/*
* drive status 2
*/
#define SONY535_CDD_LOADING_ERROR (0x7)
#define SONY535_CDD_NO_DISC (0x8)
#define SONY535_CDD_UNLOADING_ERROR (0x9)
#define SONY535_CDD_CADDY_NOT_INSERTED (0xd)
#define SONY535_ATN_RESET_OCCURRED (0x2)
#define SONY535_ATN_DISC_CHANGED (0x4)
#define SONY535_ATN_RESET_AND_DISC_CHANGED (0x6)
#define SONY535_ATN_EJECT_IN_PROGRESS (0xe)
#define SONY535_ATN_BUSY (0xf)
/*
* define some parameters
*/
#define SONY535_AUDIO_DRIVE_MODE (0)
#define SONY535_CDROM_DRIVE_MODE (0xe0)
#define SONY535_PLAY_OP_PLAYBACK (0)
#define SONY535_PLAY_OP_ENTER_HOLD (1)
#define SONY535_PLAY_OP_SET_AUDIO_ENDING_ADDR (2)
#define SONY535_PLAY_OP_SCAN_FORWARD (3)
#define SONY535_PLAY_OP_SCAN_BACKWARD (4)
/*
* convert from msf format to block number
*/
#define SONY_BLOCK_NUMBER(m,s,f) (((m)*60L+(s))*75L+(f))
#define SONY_BLOCK_NUMBER_MSF(x) (((x)[0]*60L+(x)[1])*75L+(x)[2])
/*
* error return values from the doSonyCmd() routines
*/
#define TIME_OUT (-1)
#define NO_CDROM (-2)
#define BAD_STATUS (-3)
#define CD_BUSY (-4)
#define NOT_DATA_CD (-5)
#define NO_ROOM (-6)
#define LOG_START_OFFSET 150 /* Offset of first logical sector */
#define SONY_JIFFIES_TIMEOUT (5*HZ) /* Maximum time
the drive will wait/try for an
operation */
#define SONY_READY_RETRIES (50000) /* How many times to retry a
spin waiting for a register
to come ready */
#define SONY535_FAST_POLLS (10000) /* how many times recheck
status waiting for a data
to become ready */
typedef unsigned char Byte;
/*
* This is the complete status returned from the drive configuration request
* command.
*/
struct s535_sony_drive_config
{
char vendor_id[8];
char product_id[16];
char product_rev_level[4];
};
/* The following is returned from the request sub-q data command */
struct s535_sony_subcode
{
unsigned char address :4;
unsigned char control :4;
unsigned char track_num;
unsigned char index_num;
unsigned char rel_msf[3];
unsigned char abs_msf[3];
};
struct s535_sony_disc_capacity
{
Byte mFirstTrack, sFirstTrack, fFirstTrack;
Byte mLeadOut, sLeadOut, fLeadOut;
};
/*
* The following is returned from the request TOC (Table Of Contents) command.
* (last_track_num-first_track_num+1) values are valid in tracks.
*/
struct s535_sony_toc
{
unsigned char reserved0 :4;
unsigned char control0 :4;
unsigned char point0;
unsigned char first_track_num;
unsigned char reserved0a;
unsigned char reserved0b;
unsigned char reserved1 :4;
unsigned char control1 :4;
unsigned char point1;
unsigned char last_track_num;
unsigned char dummy1;
unsigned char dummy2;
unsigned char reserved2 :4;
unsigned char control2 :4;
unsigned char point2;
unsigned char lead_out_start_msf[3];
struct
{
unsigned char reserved :4;
unsigned char control :4;
unsigned char track;
unsigned char track_start_msf[3];
} tracks[100];
unsigned int lead_out_start_lba;
};
#endif /* SONYCD535_H */