diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index ef1f33e962b6..89823d24a384 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -92,6 +92,7 @@ struct imon_usb_dev_descr { __u16 flags; #define IMON_NO_FLAGS 0 #define IMON_NEED_20MS_PKT_DELAY 1 +#define IMON_IR_RAW 2 struct imon_panel_key_table key_table[]; }; @@ -122,6 +123,12 @@ struct imon_context { unsigned char usb_tx_buf[8]; unsigned int send_packet_delay; + struct rx_data { + int count; /* length of 0 or 1 sequence */ + int prev_bit; /* logic level of sequence */ + int initial_space; /* initial space flag */ + } rx; + struct tx_t { unsigned char data_buf[35]; /* user data buffer */ struct completion finished; /* wait for write to finish */ @@ -324,6 +331,10 @@ static const struct imon_usb_dev_descr imon_DH102 = { } }; +static const struct imon_usb_dev_descr imon_ir_raw = { + .flags = IMON_IR_RAW, +}; + /* * USB Device ID for iMON USB Control Boards * @@ -407,6 +418,18 @@ static struct usb_device_id imon_usb_id_table[] = { /* device specifics unknown */ { USB_DEVICE(0x15c2, 0x0046), .driver_info = (unsigned long)&imon_default_table}, + /* TriGem iMON (IR only) -- TG_iMON.inf */ + { USB_DEVICE(0x0aa8, 0x8001), + .driver_info = (unsigned long)&imon_ir_raw}, + /* SoundGraph iMON (IR only) -- sg_imon.inf */ + { USB_DEVICE(0x04e8, 0xff30), + .driver_info = (unsigned long)&imon_ir_raw}, + /* SoundGraph iMON VFD (IR & VFD) -- iMON_VFD.inf */ + { USB_DEVICE(0x0aa8, 0xffda), + .driver_info = (unsigned long)&imon_ir_raw}, + /* SoundGraph iMON SS (IR & VFD) -- iMON_SS.inf */ + { USB_DEVICE(0x15c2, 0xffda), + .driver_info = (unsigned long)&imon_ir_raw}, {} }; @@ -1573,8 +1596,91 @@ static int imon_parse_press_type(struct imon_context *ictx, /** * Process the incoming packet */ -static void imon_incoming_packet(struct imon_context *ictx, +/** + * Convert bit count to time duration (in us) and submit + * the value to lirc_dev. + */ +static void submit_data(struct imon_context *context) +{ + DEFINE_IR_RAW_EVENT(ev); + + ev.pulse = context->rx.prev_bit; + ev.duration = US_TO_NS(context->rx.count * BIT_DURATION); + ir_raw_event_store_with_filter(context->rdev, &ev); +} + +/** + * Process the incoming packet + */ +static void imon_incoming_ir_raw(struct imon_context *context, struct urb *urb, int intf) +{ + int len = urb->actual_length; + unsigned char *buf = urb->transfer_buffer; + struct device *dev = context->dev; + int octet, bit; + unsigned char mask; + + if (len != 8) { + dev_warn(dev, "imon %s: invalid incoming packet size (len = %d, intf%d)\n", + __func__, len, intf); + return; + } + + if (debug) + dev_info(dev, "raw packet: %*ph\n", len, buf); + /* + * Translate received data to pulse and space lengths. + * Received data is active low, i.e. pulses are 0 and + * spaces are 1. + * + * My original algorithm was essentially similar to + * Changwoo Ryu's with the exception that he switched + * the incoming bits to active high and also fed an + * initial space to LIRC at the start of a new sequence + * if the previous bit was a pulse. + * + * I've decided to adopt his algorithm. + */ + + if (buf[7] == 1 && context->rx.initial_space) { + /* LIRC requires a leading space */ + context->rx.prev_bit = 0; + context->rx.count = 4; + submit_data(context); + context->rx.count = 0; + } + + for (octet = 0; octet < 5; ++octet) { + mask = 0x80; + for (bit = 0; bit < 8; ++bit) { + int curr_bit = !(buf[octet] & mask); + + if (curr_bit != context->rx.prev_bit) { + if (context->rx.count) { + submit_data(context); + context->rx.count = 0; + } + context->rx.prev_bit = curr_bit; + } + ++context->rx.count; + mask >>= 1; + } + } + + if (buf[7] == 10) { + if (context->rx.count) { + submit_data(context); + context->rx.count = 0; + } + context->rx.initial_space = context->rx.prev_bit; + } + + ir_raw_event_handle(context->rdev); +} + +static void imon_incoming_scancode(struct imon_context *ictx, + struct urb *urb, int intf) { int len = urb->actual_length; unsigned char *buf = urb->transfer_buffer; @@ -1757,7 +1863,10 @@ static void usb_rx_callback_intf0(struct urb *urb) break; case 0: - imon_incoming_packet(ictx, urb, intfnum); + if (ictx->rdev->driver_type == RC_DRIVER_IR_RAW) + imon_incoming_ir_raw(ictx, urb, intfnum); + else + imon_incoming_scancode(ictx, urb, intfnum); break; default: @@ -1798,7 +1907,10 @@ static void usb_rx_callback_intf1(struct urb *urb) break; case 0: - imon_incoming_packet(ictx, urb, intfnum); + if (ictx->rdev->driver_type == RC_DRIVER_IR_RAW) + imon_incoming_ir_raw(ictx, urb, intfnum); + else + imon_incoming_scancode(ictx, urb, intfnum); break; default: @@ -1906,11 +2018,14 @@ static void imon_set_display_type(struct imon_context *ictx) case 0x0041: case 0x0042: case 0x0043: + case 0x8001: + case 0xff30: configured_display_type = IMON_DISPLAY_TYPE_NONE; ictx->display_supported = false; break; case 0x0036: case 0x0044: + case 0xffda: default: configured_display_type = IMON_DISPLAY_TYPE_VFD; break; @@ -1935,7 +2050,8 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx) const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88 }; - rdev = rc_allocate_device(RC_DRIVER_SCANCODE); + rdev = rc_allocate_device(ictx->dev_descr->flags & IMON_IR_RAW ? + RC_DRIVER_IR_RAW : RC_DRIVER_SCANCODE); if (!rdev) { dev_err(ictx->dev, "remote control dev allocation failed\n"); goto out; @@ -1953,7 +2069,11 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx) rdev->dev.parent = ictx->dev; rdev->priv = ictx; - rdev->allowed_protocols = RC_BIT_OTHER | RC_BIT_RC6_MCE; /* iMON PAD or MCE */ + if (ictx->dev_descr->flags & IMON_IR_RAW) + rdev->allowed_protocols = RC_BIT_ALL_IR_DECODER; + else + /* iMON PAD or MCE */ + rdev->allowed_protocols = RC_BIT_OTHER | RC_BIT_RC6_MCE; rdev->change_protocol = imon_ir_change_protocol; rdev->driver_name = MOD_NAME; @@ -1971,7 +2091,8 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx) imon_set_display_type(ictx); - if (ictx->rc_type == RC_BIT_RC6_MCE) + if (ictx->rc_type == RC_BIT_RC6_MCE || + ictx->dev_descr->flags & IMON_IR_RAW) rdev->map_name = RC_MAP_IMON_MCE; else rdev->map_name = RC_MAP_IMON_PAD; diff --git a/drivers/staging/media/lirc/Kconfig b/drivers/staging/media/lirc/Kconfig index 574ab507ad0d..bc67da254262 100644 --- a/drivers/staging/media/lirc/Kconfig +++ b/drivers/staging/media/lirc/Kconfig @@ -12,14 +12,6 @@ menuconfig LIRC_STAGING if LIRC_STAGING -config LIRC_IMON - tristate "Legacy SoundGraph iMON Receiver and Display" - depends on LIRC && USB - help - Driver for the original SoundGraph iMON IR Receiver and Display - - Current generation iMON devices use the input layer imon driver. - config LIRC_SASEM tristate "Sasem USB IR Remote" depends on LIRC && USB diff --git a/drivers/staging/media/lirc/Makefile b/drivers/staging/media/lirc/Makefile index 3f3111680494..28740c94349c 100644 --- a/drivers/staging/media/lirc/Makefile +++ b/drivers/staging/media/lirc/Makefile @@ -3,7 +3,6 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_LIRC_IMON) += lirc_imon.o obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o obj-$(CONFIG_LIRC_SIR) += lirc_sir.o obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c deleted file mode 100644 index 1e650fba4a92..000000000000 --- a/drivers/staging/media/lirc/lirc_imon.c +++ /dev/null @@ -1,979 +0,0 @@ -/* - * lirc_imon.c: LIRC/VFD/LCD driver for SoundGraph iMON IR/VFD/LCD - * including the iMON PAD model - * - * Copyright(C) 2004 Venky Raju(dev@venky.ws) - * Copyright(C) 2009 Jarod Wilson - * - * lirc_imon is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include - -#include -#include - -#define MOD_AUTHOR "Venky Raju " -#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display" -#define MOD_NAME "lirc_imon" -#define MOD_VERSION "0.8" - -#define DISPLAY_MINOR_BASE 144 -#define DEVICE_NAME "lcd%d" - -#define BUF_CHUNK_SIZE 4 -#define BUF_SIZE 128 - -#define BIT_DURATION 250 /* each bit received is 250us */ - -/*** P R O T O T Y P E S ***/ - -/* USB Callback prototypes */ -static int imon_probe(struct usb_interface *interface, - const struct usb_device_id *id); -static void imon_disconnect(struct usb_interface *interface); -static void usb_rx_callback(struct urb *urb); -static void usb_tx_callback(struct urb *urb); - -/* suspend/resume support */ -static int imon_resume(struct usb_interface *intf); -static int imon_suspend(struct usb_interface *intf, pm_message_t message); - -/* Display file_operations function prototypes */ -static int display_open(struct inode *inode, struct file *file); -static int display_close(struct inode *inode, struct file *file); - -/* VFD write operation */ -static ssize_t vfd_write(struct file *file, const char __user *buf, - size_t n_bytes, loff_t *pos); - -/* LIRC driver function prototypes */ -static int ir_open(void *data); -static void ir_close(void *data); - -/*** G L O B A L S ***/ -#define IMON_DATA_BUF_SZ 35 - -struct imon_context { - struct usb_device *usbdev; - /* Newer devices have two interfaces */ - int display; /* not all controllers do */ - int display_isopen; /* display port has been opened */ - int ir_isopen; /* IR port open */ - int dev_present; /* USB device presence */ - struct mutex ctx_lock; /* to lock this object */ - wait_queue_head_t remove_ok; /* For unexpected USB disconnects */ - - int vfd_proto_6p; /* some VFD require a 6th packet */ - - struct lirc_driver *driver; - struct usb_endpoint_descriptor *rx_endpoint; - struct usb_endpoint_descriptor *tx_endpoint; - struct urb *rx_urb; - struct urb *tx_urb; - unsigned char usb_rx_buf[8]; - unsigned char usb_tx_buf[8]; - - struct rx_data { - int count; /* length of 0 or 1 sequence */ - int prev_bit; /* logic level of sequence */ - int initial_space; /* initial space flag */ - } rx; - - struct tx_t { - unsigned char data_buf[IMON_DATA_BUF_SZ]; /* user data buffer */ - struct completion finished; /* wait for write to finish */ - atomic_t busy; /* write in progress */ - int status; /* status of tx completion */ - } tx; -}; - -static const struct file_operations display_fops = { - .owner = THIS_MODULE, - .open = &display_open, - .write = &vfd_write, - .release = &display_close, - .llseek = noop_llseek, -}; - -/* - * USB Device ID for iMON USB Control Boards - * - * The Windows drivers contain 6 different inf files, more or less one for - * each new device until the 0x0034-0x0046 devices, which all use the same - * driver. Some of the devices in the 34-46 range haven't been definitively - * identified yet. Early devices have either a TriGem Computer, Inc. or a - * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later - * devices use the SoundGraph vendor ID (0x15c2). - */ -static struct usb_device_id imon_usb_id_table[] = { - /* TriGem iMON (IR only) -- TG_iMON.inf */ - { USB_DEVICE(0x0aa8, 0x8001) }, - - /* SoundGraph iMON (IR only) -- sg_imon.inf */ - { USB_DEVICE(0x04e8, 0xff30) }, - - /* SoundGraph iMON VFD (IR & VFD) -- iMON_VFD.inf */ - { USB_DEVICE(0x0aa8, 0xffda) }, - - /* SoundGraph iMON SS (IR & VFD) -- iMON_SS.inf */ - { USB_DEVICE(0x15c2, 0xffda) }, - - {} -}; - -/* Some iMON VFD models requires a 6th packet for VFD writes */ -static struct usb_device_id vfd_proto_6p_list[] = { - { USB_DEVICE(0x15c2, 0xffda) }, - {} -}; - -/* Some iMON devices have no lcd/vfd, don't set one up */ -static struct usb_device_id ir_only_list[] = { - { USB_DEVICE(0x0aa8, 0x8001) }, - { USB_DEVICE(0x04e8, 0xff30) }, - {} -}; - -/* USB Device data */ -static struct usb_driver imon_driver = { - .name = MOD_NAME, - .probe = imon_probe, - .disconnect = imon_disconnect, - .suspend = imon_suspend, - .resume = imon_resume, - .id_table = imon_usb_id_table, -}; - -static struct usb_class_driver imon_class = { - .name = DEVICE_NAME, - .fops = &display_fops, - .minor_base = DISPLAY_MINOR_BASE, -}; - -/* to prevent races between open() and disconnect(), probing, etc */ -static DEFINE_MUTEX(driver_lock); - -static int debug; - -/*** M O D U L E C O D E ***/ - -MODULE_AUTHOR(MOD_AUTHOR); -MODULE_DESCRIPTION(MOD_DESC); -MODULE_VERSION(MOD_VERSION); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(usb, imon_usb_id_table); -module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes(default: no)"); - -static void free_imon_context(struct imon_context *context) -{ - struct device *dev = context->driver->dev; - - usb_free_urb(context->tx_urb); - usb_free_urb(context->rx_urb); - lirc_buffer_free(context->driver->rbuf); - kfree(context->driver->rbuf); - kfree(context->driver); - kfree(context); - - dev_dbg(dev, "%s: iMON context freed\n", __func__); -} - -static void deregister_from_lirc(struct imon_context *context) -{ - int retval; - int minor = context->driver->minor; - - retval = lirc_unregister_driver(minor); - if (retval) - dev_err(&context->usbdev->dev, - "unable to deregister from lirc(%d)", retval); - else - dev_info(&context->usbdev->dev, - "Deregistered iMON driver (minor:%d)\n", minor); -} - -/** - * Called when the Display device (e.g. /dev/lcd0) - * is opened by the application. - */ -static int display_open(struct inode *inode, struct file *file) -{ - struct usb_interface *interface; - struct imon_context *context = NULL; - int subminor; - int retval = 0; - - /* prevent races with disconnect */ - mutex_lock(&driver_lock); - - subminor = iminor(inode); - interface = usb_find_interface(&imon_driver, subminor); - if (!interface) { - pr_err("%s: could not find interface for minor %d\n", - __func__, subminor); - retval = -ENODEV; - goto exit; - } - context = usb_get_intfdata(interface); - - if (!context) { - dev_err(&interface->dev, "no context found for minor %d\n", - subminor); - retval = -ENODEV; - goto exit; - } - - mutex_lock(&context->ctx_lock); - - if (!context->display) { - dev_err(&interface->dev, - "%s: display not supported by device\n", __func__); - retval = -ENODEV; - } else if (context->display_isopen) { - dev_err(&interface->dev, - "%s: display port is already open\n", __func__); - retval = -EBUSY; - } else { - context->display_isopen = 1; - file->private_data = context; - dev_info(context->driver->dev, "display port opened\n"); - } - - mutex_unlock(&context->ctx_lock); - -exit: - mutex_unlock(&driver_lock); - return retval; -} - -/** - * Called when the display device (e.g. /dev/lcd0) - * is closed by the application. - */ -static int display_close(struct inode *inode, struct file *file) -{ - struct imon_context *context = NULL; - int retval = 0; - - context = file->private_data; - - if (!context) { - pr_err("%s: no context for device\n", __func__); - return -ENODEV; - } - - mutex_lock(&context->ctx_lock); - - if (!context->display) { - dev_err(&context->usbdev->dev, - "%s: display not supported by device\n", __func__); - retval = -ENODEV; - } else if (!context->display_isopen) { - dev_err(&context->usbdev->dev, - "%s: display is not open\n", __func__); - retval = -EIO; - } else { - context->display_isopen = 0; - dev_info(context->driver->dev, "display port closed\n"); - if (!context->dev_present && !context->ir_isopen) { - /* - * Device disconnected before close and IR port is not - * open. If IR port is open, context will be deleted by - * ir_close. - */ - mutex_unlock(&context->ctx_lock); - free_imon_context(context); - return retval; - } - } - - mutex_unlock(&context->ctx_lock); - return retval; -} - -/** - * Sends a packet to the device -- this function must be called - * with context->ctx_lock held. - */ -static int send_packet(struct imon_context *context) -{ - unsigned int pipe; - int interval = 0; - int retval = 0; - - /* Check if we need to use control or interrupt urb */ - pipe = usb_sndintpipe(context->usbdev, - context->tx_endpoint->bEndpointAddress); - interval = context->tx_endpoint->bInterval; - - usb_fill_int_urb(context->tx_urb, context->usbdev, pipe, - context->usb_tx_buf, - sizeof(context->usb_tx_buf), - usb_tx_callback, context, interval); - - context->tx_urb->actual_length = 0; - - reinit_completion(&context->tx.finished); - atomic_set(&context->tx.busy, 1); - - retval = usb_submit_urb(context->tx_urb, GFP_KERNEL); - if (retval) { - atomic_set(&context->tx.busy, 0); - dev_err(&context->usbdev->dev, "error submitting urb(%d)\n", - retval); - } else { - /* Wait for transmission to complete (or abort) */ - mutex_unlock(&context->ctx_lock); - retval = wait_for_completion_interruptible( - &context->tx.finished); - if (retval) - dev_err(&context->usbdev->dev, - "%s: task interrupted\n", __func__); - mutex_lock(&context->ctx_lock); - - retval = context->tx.status; - if (retval) - dev_err(&context->usbdev->dev, - "packet tx failed (%d)\n", retval); - } - - return retval; -} - -/** - * Writes data to the VFD. The iMON VFD is 2x16 characters - * and requires data in 5 consecutive USB interrupt packets, - * each packet but the last carrying 7 bytes. - * - * I don't know if the VFD board supports features such as - * scrolling, clearing rows, blanking, etc. so at - * the caller must provide a full screen of data. If fewer - * than 32 bytes are provided spaces will be appended to - * generate a full screen. - */ -static ssize_t vfd_write(struct file *file, const char __user *buf, - size_t n_bytes, loff_t *pos) -{ - int i; - int offset; - int seq; - int retval = 0; - struct imon_context *context; - const unsigned char vfd_packet6[] = { - 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF }; - int *data_buf = NULL; - - context = file->private_data; - if (!context) { - pr_err("%s: no context for device\n", __func__); - return -ENODEV; - } - - mutex_lock(&context->ctx_lock); - - if (!context->dev_present) { - dev_err(&context->usbdev->dev, - "%s: no iMON device present\n", __func__); - retval = -ENODEV; - goto exit; - } - - if (n_bytes <= 0 || n_bytes > IMON_DATA_BUF_SZ - 3) { - dev_err(&context->usbdev->dev, - "%s: invalid payload size\n", __func__); - retval = -EINVAL; - goto exit; - } - - data_buf = memdup_user(buf, n_bytes); - if (IS_ERR(data_buf)) { - mutex_unlock(&context->ctx_lock); - return PTR_ERR(data_buf); - } - - memcpy(context->tx.data_buf, data_buf, n_bytes); - - /* Pad with spaces */ - for (i = n_bytes; i < IMON_DATA_BUF_SZ - 3; ++i) - context->tx.data_buf[i] = ' '; - - for (i = IMON_DATA_BUF_SZ - 3; i < IMON_DATA_BUF_SZ; ++i) - context->tx.data_buf[i] = 0xFF; - - offset = 0; - seq = 0; - - do { - memcpy(context->usb_tx_buf, context->tx.data_buf + offset, 7); - context->usb_tx_buf[7] = (unsigned char)seq; - - retval = send_packet(context); - if (retval) { - dev_err(&context->usbdev->dev, - "send packet failed for packet #%d\n", - seq / 2); - goto exit; - } else { - seq += 2; - offset += 7; - } - - } while (offset < IMON_DATA_BUF_SZ); - - if (context->vfd_proto_6p) { - /* Send packet #6 */ - memcpy(context->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6)); - context->usb_tx_buf[7] = (unsigned char)seq; - retval = send_packet(context); - if (retval) - dev_err(&context->usbdev->dev, - "send packet failed for packet #%d\n", - seq / 2); - } - -exit: - mutex_unlock(&context->ctx_lock); - kfree(data_buf); - - return (!retval) ? n_bytes : retval; -} - -/** - * Callback function for USB core API: transmit data - */ -static void usb_tx_callback(struct urb *urb) -{ - struct imon_context *context; - - if (!urb) - return; - context = (struct imon_context *)urb->context; - if (!context) - return; - - context->tx.status = urb->status; - - /* notify waiters that write has finished */ - atomic_set(&context->tx.busy, 0); - complete(&context->tx.finished); -} - -/** - * Called by lirc_dev when the application opens /dev/lirc - */ -static int ir_open(void *data) -{ - struct imon_context *context; - - /* prevent races with disconnect */ - mutex_lock(&driver_lock); - - context = data; - - /* initial IR protocol decode variables */ - context->rx.count = 0; - context->rx.initial_space = 1; - context->rx.prev_bit = 0; - - init_completion(&context->tx.finished); - - context->ir_isopen = 1; - dev_info(context->driver->dev, "IR port opened\n"); - - mutex_unlock(&driver_lock); - return 0; -} - -/** - * Called by lirc_dev when the application closes /dev/lirc - */ -static void ir_close(void *data) -{ - struct imon_context *context; - - context = data; - if (!context) { - pr_err("%s: no context for device\n", __func__); - return; - } - - mutex_lock(&context->ctx_lock); - - context->ir_isopen = 0; - dev_info(context->driver->dev, "IR port closed\n"); - - if (!context->dev_present) { - /* - * Device disconnected while IR port was still open. Driver - * was not deregistered at disconnect time, so do it now. - */ - deregister_from_lirc(context); - - if (!context->display_isopen) { - mutex_unlock(&context->ctx_lock); - free_imon_context(context); - return; - } - /* - * If display port is open, context will be deleted by - * display_close - */ - } - - mutex_unlock(&context->ctx_lock); -} - -/** - * Convert bit count to time duration (in us) and submit - * the value to lirc_dev. - */ -static void submit_data(struct imon_context *context) -{ - unsigned char buf[4]; - int value = context->rx.count; - int i; - - dev_dbg(context->driver->dev, "submitting data to LIRC\n"); - - value *= BIT_DURATION; - value &= PULSE_MASK; - if (context->rx.prev_bit) - value |= PULSE_BIT; - - for (i = 0; i < 4; ++i) - buf[i] = value >> (i * 8); - - lirc_buffer_write(context->driver->rbuf, buf); - wake_up(&context->driver->rbuf->wait_poll); -} - -/** - * Process the incoming packet - */ -static void imon_incoming_packet(struct imon_context *context, - struct urb *urb, int intf) -{ - int len = urb->actual_length; - unsigned char *buf = urb->transfer_buffer; - struct device *dev = context->driver->dev; - int octet, bit; - unsigned char mask; - - /* - * just bail out if no listening IR client - */ - if (!context->ir_isopen) - return; - - if (len != 8) { - dev_warn(dev, "imon %s: invalid incoming packet size (len = %d, intf%d)\n", - __func__, len, intf); - return; - } - - if (debug) - dev_info(dev, "raw packet: %*ph\n", len, buf); - /* - * Translate received data to pulse and space lengths. - * Received data is active low, i.e. pulses are 0 and - * spaces are 1. - * - * My original algorithm was essentially similar to - * Changwoo Ryu's with the exception that he switched - * the incoming bits to active high and also fed an - * initial space to LIRC at the start of a new sequence - * if the previous bit was a pulse. - * - * I've decided to adopt his algorithm. - */ - - if (buf[7] == 1 && context->rx.initial_space) { - /* LIRC requires a leading space */ - context->rx.prev_bit = 0; - context->rx.count = 4; - submit_data(context); - context->rx.count = 0; - } - - for (octet = 0; octet < 5; ++octet) { - mask = 0x80; - for (bit = 0; bit < 8; ++bit) { - int curr_bit = !(buf[octet] & mask); - - if (curr_bit != context->rx.prev_bit) { - if (context->rx.count) { - submit_data(context); - context->rx.count = 0; - } - context->rx.prev_bit = curr_bit; - } - ++context->rx.count; - mask >>= 1; - } - } - - if (buf[7] == 10) { - if (context->rx.count) { - submit_data(context); - context->rx.count = 0; - } - context->rx.initial_space = context->rx.prev_bit; - } -} - -/** - * Callback function for USB core API: receive data - */ -static void usb_rx_callback(struct urb *urb) -{ - struct imon_context *context; - int intfnum = 0; - - if (!urb) - return; - - context = (struct imon_context *)urb->context; - if (!context) - return; - - switch (urb->status) { - case -ENOENT: /* usbcore unlink successful! */ - return; - - case 0: - imon_incoming_packet(context, urb, intfnum); - break; - - default: - dev_warn(context->driver->dev, "imon %s: status(%d): ignored\n", - __func__, urb->status); - break; - } - - usb_submit_urb(context->rx_urb, GFP_ATOMIC); -} - -/** - * Callback function for USB core API: Probe - */ -static int imon_probe(struct usb_interface *interface, - const struct usb_device_id *id) -{ - struct usb_device *usbdev = NULL; - struct usb_host_interface *iface_desc = NULL; - struct usb_endpoint_descriptor *rx_endpoint = NULL; - struct usb_endpoint_descriptor *tx_endpoint = NULL; - struct urb *rx_urb = NULL; - struct urb *tx_urb = NULL; - struct lirc_driver *driver = NULL; - struct lirc_buffer *rbuf = NULL; - struct device *dev = &interface->dev; - int ifnum; - int lirc_minor = 0; - int num_endpts; - int retval = -ENOMEM; - int display_ep_found = 0; - int ir_ep_found = 0; - int vfd_proto_6p = 0; - struct imon_context *context = NULL; - int i; - u16 vendor, product; - - /* prevent races probing devices w/multiple interfaces */ - mutex_lock(&driver_lock); - - context = kzalloc(sizeof(*context), GFP_KERNEL); - if (!context) - goto driver_unlock; - - /* - * Try to auto-detect the type of display if the user hasn't set - * it by hand via the display_type modparam. Default is VFD. - */ - if (usb_match_id(interface, ir_only_list)) - context->display = 0; - else - context->display = 1; - - usbdev = usb_get_dev(interface_to_usbdev(interface)); - iface_desc = interface->cur_altsetting; - num_endpts = iface_desc->desc.bNumEndpoints; - ifnum = iface_desc->desc.bInterfaceNumber; - vendor = le16_to_cpu(usbdev->descriptor.idVendor); - product = le16_to_cpu(usbdev->descriptor.idProduct); - - dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n", - __func__, vendor, product, ifnum); - - /* - * Scan the endpoint list and set: - * first input endpoint = IR endpoint - * first output endpoint = display endpoint - */ - for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) { - struct usb_endpoint_descriptor *ep; - int ep_dir; - int ep_type; - - ep = &iface_desc->endpoint[i].desc; - ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK; - ep_type = usb_endpoint_type(ep); - - if (!ir_ep_found && - ep_dir == USB_DIR_IN && - ep_type == USB_ENDPOINT_XFER_INT) { - - rx_endpoint = ep; - ir_ep_found = 1; - dev_dbg(dev, "%s: found IR endpoint\n", __func__); - - } else if (!display_ep_found && ep_dir == USB_DIR_OUT && - ep_type == USB_ENDPOINT_XFER_INT) { - tx_endpoint = ep; - display_ep_found = 1; - dev_dbg(dev, "%s: found display endpoint\n", __func__); - } - } - - /* - * Some iMON receivers have no display. Unfortunately, it seems - * that SoundGraph recycles device IDs between devices both with - * and without... :\ - */ - if (context->display == 0) { - display_ep_found = 0; - dev_dbg(dev, "%s: device has no display\n", __func__); - } - - /* Input endpoint is mandatory */ - if (!ir_ep_found) { - dev_err(dev, "%s: no valid input (IR) endpoint found.\n", - __func__); - retval = -ENODEV; - goto free_context; - } - - /* Determine if display requires 6 packets */ - if (display_ep_found) { - if (usb_match_id(interface, vfd_proto_6p_list)) - vfd_proto_6p = 1; - - dev_dbg(dev, "%s: vfd_proto_6p: %d\n", - __func__, vfd_proto_6p); - } - - driver = kzalloc(sizeof(*driver), GFP_KERNEL); - if (!driver) - goto free_context; - - rbuf = kmalloc(sizeof(*rbuf), GFP_KERNEL); - if (!rbuf) - goto free_driver; - - if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) { - dev_err(dev, "%s: lirc_buffer_init failed\n", __func__); - goto free_rbuf; - } - rx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!rx_urb) - goto free_lirc_buf; - tx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!tx_urb) - goto free_rx_urb; - - mutex_init(&context->ctx_lock); - context->vfd_proto_6p = vfd_proto_6p; - - strcpy(driver->name, MOD_NAME); - driver->minor = -1; - driver->code_length = BUF_CHUNK_SIZE * 8; - driver->sample_rate = 0; - driver->features = LIRC_CAN_REC_MODE2; - driver->data = context; - driver->rbuf = rbuf; - driver->set_use_inc = ir_open; - driver->set_use_dec = ir_close; - driver->dev = &interface->dev; - driver->owner = THIS_MODULE; - - mutex_lock(&context->ctx_lock); - - context->driver = driver; - /* start out in keyboard mode */ - - lirc_minor = lirc_register_driver(driver); - if (lirc_minor < 0) { - dev_err(dev, "%s: lirc_register_driver failed\n", __func__); - goto free_tx_urb; - } - - dev_info(dev, "Registered iMON driver (lirc minor: %d)\n", - lirc_minor); - - /* Needed while unregistering! */ - driver->minor = lirc_minor; - - context->usbdev = usbdev; - context->dev_present = 1; - context->rx_endpoint = rx_endpoint; - context->rx_urb = rx_urb; - - /* - * tx is used to send characters to lcd/vfd, associate RF - * remotes, set IR protocol, and maybe more... - */ - context->tx_endpoint = tx_endpoint; - context->tx_urb = tx_urb; - - if (display_ep_found) - context->display = 1; - - usb_fill_int_urb(context->rx_urb, context->usbdev, - usb_rcvintpipe(context->usbdev, - context->rx_endpoint->bEndpointAddress), - context->usb_rx_buf, sizeof(context->usb_rx_buf), - usb_rx_callback, context, - context->rx_endpoint->bInterval); - - retval = usb_submit_urb(context->rx_urb, GFP_KERNEL); - if (retval) { - dev_err(dev, "usb_submit_urb failed for intf0 (%d)\n", retval); - goto unregister_lirc; - } - - usb_set_intfdata(interface, context); - - if (context->display && ifnum == 0) { - dev_dbg(dev, "%s: Registering iMON display with sysfs\n", - __func__); - - if (usb_register_dev(interface, &imon_class)) { - /* Not a fatal error, so ignore */ - dev_info(dev, "%s: could not get a minor number for display\n", - __func__); - } - } - - dev_info(dev, "iMON device (%04x:%04x, intf%d) on usb<%d:%d> initialized\n", - vendor, product, ifnum, usbdev->bus->busnum, usbdev->devnum); - - /* Everything went fine. Just unlock and return retval (with is 0) */ - mutex_unlock(&context->ctx_lock); - goto driver_unlock; - -unregister_lirc: - lirc_unregister_driver(driver->minor); - -free_tx_urb: - mutex_unlock(&context->ctx_lock); - usb_free_urb(tx_urb); - -free_rx_urb: - usb_free_urb(rx_urb); - -free_lirc_buf: - lirc_buffer_free(rbuf); - -free_rbuf: - kfree(rbuf); - -free_driver: - kfree(driver); -free_context: - kfree(context); - context = NULL; - -driver_unlock: - mutex_unlock(&driver_lock); - - return retval; -} - -/** - * Callback function for USB core API: disconnect - */ -static void imon_disconnect(struct usb_interface *interface) -{ - struct imon_context *context; - int ifnum; - - /* prevent races with ir_open()/display_open() */ - mutex_lock(&driver_lock); - - context = usb_get_intfdata(interface); - ifnum = interface->cur_altsetting->desc.bInterfaceNumber; - - mutex_lock(&context->ctx_lock); - - usb_set_intfdata(interface, NULL); - - /* Abort ongoing write */ - if (atomic_read(&context->tx.busy)) { - usb_kill_urb(context->tx_urb); - complete(&context->tx.finished); - } - - context->dev_present = 0; - usb_kill_urb(context->rx_urb); - if (context->display) - usb_deregister_dev(interface, &imon_class); - - if (!context->ir_isopen && !context->dev_present) { - deregister_from_lirc(context); - mutex_unlock(&context->ctx_lock); - if (!context->display_isopen) - free_imon_context(context); - } else - mutex_unlock(&context->ctx_lock); - - mutex_unlock(&driver_lock); - - dev_info(&interface->dev, "%s: iMON device (intf%d) disconnected\n", - __func__, ifnum); -} - -static int imon_suspend(struct usb_interface *intf, pm_message_t message) -{ - struct imon_context *context = usb_get_intfdata(intf); - - usb_kill_urb(context->rx_urb); - - return 0; -} - -static int imon_resume(struct usb_interface *intf) -{ - struct imon_context *context = usb_get_intfdata(intf); - - usb_fill_int_urb(context->rx_urb, context->usbdev, - usb_rcvintpipe(context->usbdev, - context->rx_endpoint->bEndpointAddress), - context->usb_rx_buf, sizeof(context->usb_rx_buf), - usb_rx_callback, context, - context->rx_endpoint->bInterval); - - return usb_submit_urb(context->rx_urb, GFP_ATOMIC); -} - -module_usb_driver(imon_driver);