From f62f7dcbf023160ca47eb4bc7228ece8207f8a8e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 25 Jul 2019 09:23:39 +0200 Subject: [PATCH] Documentation/s390: remove outdated debugging390 documentation This file would need a lot of work to make sense again. Thomas Huth started working on that four years ago, but that wasn't finished. Therefore remove this. Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- Documentation/s390/debugging390.rst | 2613 --------------------------- Documentation/s390/index.rst | 1 - 2 files changed, 2614 deletions(-) delete mode 100644 Documentation/s390/debugging390.rst diff --git a/Documentation/s390/debugging390.rst b/Documentation/s390/debugging390.rst deleted file mode 100644 index 73ad0b06c666..000000000000 --- a/Documentation/s390/debugging390.rst +++ /dev/null @@ -1,2613 +0,0 @@ -============================================= -Debugging on Linux for s/390 & z/Architecture -============================================= - -Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) - -Copyright (C) 2000-2001 IBM Deutschland Entwicklung GmbH, IBM Corporation - -.. Best viewed with fixed width fonts - -Overview of Document: -===================== -This document is intended to give a good overview of how to debug Linux for -s/390 and z/Architecture. It is not intended as a complete reference and not a -tutorial on the fundamentals of C & assembly. It doesn't go into -390 IO in any detail. It is intended to complement the documents in the -reference section below & any other worthwhile references you get. - -It is intended like the Enterprise Systems Architecture/390 Reference Summary -to be printed out & used as a quick cheat sheet self help style reference when -problems occur. - -.. Contents - ======== - Register Set - Address Spaces on Intel Linux - Address Spaces on Linux for s/390 & z/Architecture - The Linux for s/390 & z/Architecture Kernel Task Structure - Register Usage & Stackframes on Linux for s/390 & z/Architecture - A sample program with comments - Compiling programs for debugging on Linux for s/390 & z/Architecture - Debugging under VM - s/390 & z/Architecture IO Overview - Debugging IO on s/390 & z/Architecture under VM - GDB on s/390 & z/Architecture - Stack chaining in gdb by hand - Examining core dumps - ldd - Debugging modules - The proc file system - SysRq - References - Special Thanks - -Register Set -============ -The current architectures have the following registers. - -16 General propose registers, 32 bit on s/390 and 64 bit on z/Architecture, -r0-r15 (or gpr0-gpr15), used for arithmetic and addressing. - -16 Control registers, 32 bit on s/390 and 64 bit on z/Architecture, cr0-cr15, -kernel usage only, used for memory management, interrupt control, debugging -control etc. - -16 Access registers (ar0-ar15), 32 bit on both s/390 and z/Architecture, -normally not used by normal programs but potentially could be used as -temporary storage. These registers have a 1:1 association with general -purpose registers and are designed to be used in the so-called access -register mode to select different address spaces. -Access register 0 (and access register 1 on z/Architecture, which needs a -64 bit pointer) is currently used by the pthread library as a pointer to -the current running threads private area. - -16 64-bit floating point registers (fp0-fp15 ) IEEE & HFP floating -point format compliant on G5 upwards & a Floating point control reg (FPC) - -4 64-bit registers (fp0,fp2,fp4 & fp6) HFP only on older machines. - -Note: - Linux (currently) always uses IEEE & emulates G5 IEEE format on older - machines, ( provided the kernel is configured for this ). - - -The PSW is the most important register on the machine it -is 64 bit on s/390 & 128 bit on z/Architecture & serves the roles of -a program counter (pc), condition code register,memory space designator. -In IBM standard notation I am counting bit 0 as the MSB. -It has several advantages over a normal program counter -in that you can change address translation & program counter -in a single instruction. To change address translation, -e.g. switching address translation off requires that you -have a logical=physical mapping for the address you are -currently running at. - -+-------------------------+-------------------------------------------------+ -| Bit | | -+--------+----------------+ Value | -| s/390 | z/Architecture | | -+========+================+=================================================+ -| 0 | 0 | Reserved (must be 0) otherwise specification | -| | | exception occurs. | -+--------+----------------+-------------------------------------------------+ -| 1 | 1 | Program Event Recording 1 PER enabled, | -| | | PER is used to facilitate debugging e.g. | -| | | single stepping. | -+--------+----------------+-------------------------------------------------+ -| 2-4 | 2-4 | Reserved (must be 0). | -+--------+----------------+-------------------------------------------------+ -| 5 | 5 | Dynamic address translation 1=DAT on. | -+--------+----------------+-------------------------------------------------+ -| 6 | 6 | Input/Output interrupt Mask | -+--------+----------------+-------------------------------------------------+ -| 7 | 7 | External interrupt Mask used primarily for | -| | | interprocessor signalling and clock interrupts. | -+--------+----------------+-------------------------------------------------+ -| 8-11 | 8-11 | PSW Key used for complex memory protection | -| | | mechanism (not used under linux) | -+--------+----------------+-------------------------------------------------+ -| 12 | 12 | 1 on s/390 0 on z/Architecture | -+--------+----------------+-------------------------------------------------+ -| 13 | 13 | Machine Check Mask 1=enable machine check | -| | | interrupts | -+--------+----------------+-------------------------------------------------+ -| 14 | 14 | Wait State. Set this to 1 to stop the processor | -| | | except for interrupts and give time to other | -| | | LPARS. Used in CPU idle in the kernel to | -| | | increase overall usage of processor resources. | -+--------+----------------+-------------------------------------------------+ -| 15 | 15 | Problem state (if set to 1 certain instructions | -| | | are disabled). All linux user programs run with | -| | | this bit 1 (useful info for debugging under VM).| -+--------+----------------+-------------------------------------------------+ -| 16-17 | 16-17 | Address Space Control | -| | | | -| | | 00 Primary Space Mode: | -| | | | -| | | The register CR1 contains the primary | -| | | address-space control element (PASCE), which | -| | | points to the primary space region/segment | -| | | table origin. | -| | | | -| | | 01 Access register mode | -| | | | -| | | 10 Secondary Space Mode: | -| | | | -| | | The register CR7 contains the secondary | -| | | address-space control element (SASCE), which | -| | | points to the secondary space region or | -| | | segment table origin. | -| | | | -| | | 11 Home Space Mode: | -| | | | -| | | The register CR13 contains the home space | -| | | address-space control element (HASCE), which | -| | | points to the home space region/segment | -| | | table origin. | -| | | | -| | | See "Address Spaces on Linux for s/390 & | -| | | z/Architecture" below for more information | -| | | about address space usage in Linux. | -+--------+----------------+-------------------------------------------------+ -| 18-19 | 18-19 | Condition codes (CC) | -+--------+----------------+-------------------------------------------------+ -| 20 | 20 | Fixed point overflow mask if 1=FPU exceptions | -| | | for this event occur (normally 0) | -+--------+----------------+-------------------------------------------------+ -| 21 | 21 | Decimal overflow mask if 1=FPU exceptions for | -| | | this event occur (normally 0) | -+--------+----------------+-------------------------------------------------+ -| 22 | 22 | Exponent underflow mask if 1=FPU exceptions | -| | | for this event occur (normally 0) | -+--------+----------------+-------------------------------------------------+ -| 23 | 23 | Significance Mask if 1=FPU exceptions for this | -| | | event occur (normally 0) | -+--------+----------------+-------------------------------------------------+ -| 24-31 | 24-30 | Reserved Must be 0. | -| +----------------+-------------------------------------------------+ -| | 31 | Extended Addressing Mode | -| +----------------+-------------------------------------------------+ -| | 32 | Basic Addressing Mode | -| | | | -| | | Used to set addressing mode:: | -| | | | -| | | +---------+----------+----------+ | -| | | | PSW 31 | PSW 32 | | | -| | | +---------+----------+----------+ | -| | | | 0 | 0 | 24 bit | | -| | | +---------+----------+----------+ | -| | | | 0 | 1 | 31 bit | | -| | | +---------+----------+----------+ | -| | | | 1 | 1 | 64 bit | | -| | | +---------+----------+----------+ | -+--------+----------------+-------------------------------------------------+ -| 32 | | 1=31 bit addressing mode 0=24 bit addressing | -| | | mode (for backward compatibility), linux | -| | | always runs with this bit set to 1 | -+--------+----------------+-------------------------------------------------+ -| 33-64 | | Instruction address. | -| +----------------+-------------------------------------------------+ -| | 33-63 | Reserved must be 0 | -| +----------------+-------------------------------------------------+ -| | 64-127 | Address | -| | | | -| | | - In 24 bits mode bits 64-103=0 bits 104-127 | -| | | Address | -| | | - In 31 bits mode bits 64-96=0 bits 97-127 | -| | | Address | -| | | | -| | | Note: | -| | | unlike 31 bit mode on s/390 bit 96 must be | -| | | zero when loading the address with LPSWE | -| | | otherwise a specification exception occurs, | -| | | LPSW is fully backward compatible. | -+--------+----------------+-------------------------------------------------+ - -Prefix Page(s) --------------- -This per cpu memory area is too intimately tied to the processor not to mention. -It exists between the real addresses 0-4096 on s/390 and between 0-8192 on -z/Architecture and is exchanged with one page on s/390 or two pages on -z/Architecture in absolute storage by the set prefix instruction during Linux -startup. - -This page is mapped to a different prefix for each processor in an SMP -configuration (assuming the OS designer is sane of course). - -Bytes 0-512 (200 hex) on s/390 and 0-512, 4096-4544, 4604-5119 currently on -z/Architecture are used by the processor itself for holding such information -as exception indications and entry points for exceptions. - -Bytes after 0xc00 hex are used by linux for per processor globals on s/390 and -z/Architecture (there is a gap on z/Architecture currently between 0xc00 and -0x1000, too, which is used by Linux). - -The closest thing to this on traditional architectures is the interrupt -vector table. This is a good thing & does simplify some of the kernel coding -however it means that we now cannot catch stray NULL pointers in the -kernel without hard coded checks. - - - -Address Spaces on Intel Linux -============================= - -The traditional Intel Linux is approximately mapped as follows forgive -the ascii art:: - - 0xFFFFFFFF 4GB Himem ***************** - * * - * Kernel Space * - * * - ***************** **************** - User Space Himem * User Stack * * * - (typically 0xC0000000 3GB ) ***************** * * - * Shared Libs * * Next Process * - ***************** * to * - * * <== * Run * <== - * User Program * * * - * Data BSS * * * - * Text * * * - * Sections * * * - 0x00000000 ***************** **************** - -Now it is easy to see that on Intel it is quite easy to recognise a kernel -address as being one greater than user space himem (in this case 0xC0000000), -and addresses of less than this are the ones in the current running program on -this processor (if an smp box). - -If using the virtual machine ( VM ) as a debugger it is quite difficult to -know which user process is running as the address space you are looking at -could be from any process in the run queue. - -The limitation of Intels addressing technique is that the linux -kernel uses a very simple real address to virtual addressing technique -of Real Address=Virtual Address-User Space Himem. -This means that on Intel the kernel linux can typically only address -Himem=0xFFFFFFFF-0xC0000000=1GB & this is all the RAM these machines -can typically use. - -They can lower User Himem to 2GB or lower & thus be -able to use 2GB of RAM however this shrinks the maximum size -of User Space from 3GB to 2GB they have a no win limit of 4GB unless -they go to 64 Bit. - - -On 390 our limitations & strengths make us slightly different. -For backward compatibility we are only allowed use 31 bits (2GB) -of our 32 bit addresses, however, we use entirely separate address -spaces for the user & kernel. - -This means we can support 2GB of non Extended RAM on s/390, & more -with the Extended memory management swap device & -currently 4TB of physical memory currently on z/Architecture. - - -Address Spaces on Linux for s/390 & z/Architecture -================================================== - -Our addressing scheme is basically as follows:: - - Primary Space Home Space - Himem 0x7fffffff 2GB on s/390 ***************** **************** - currently 0x3ffffffffff (2^42)-1 * User Stack * * * - on z/Architecture. ***************** * * - * Shared Libs * * * - ***************** * * - * * * Kernel * - * User Program * * * - * Data BSS * * * - * Text * * * - * Sections * * * - 0x00000000 ***************** **************** - -This also means that we need to look at the PSW problem state bit and the -addressing mode to decide whether we are looking at user or kernel space. - -User space runs in primary address mode (or access register mode within -the vdso code). - -The kernel usually also runs in home space mode, however when accessing -user space the kernel switches to primary or secondary address mode if -the mvcos instruction is not available or if a compare-and-swap (futex) -instruction on a user space address is performed. - -When also looking at the ASCE control registers, this means: - -User space: - -- runs in primary or access register mode -- cr1 contains the user asce -- cr7 contains the user asce -- cr13 contains the kernel asce - -Kernel space: - -- runs in home space mode -- cr1 contains the user or kernel asce - - - the kernel asce is loaded when a uaccess requires primary or - secondary address mode - -- cr7 contains the user or kernel asce, (changed with set_fs()) -- cr13 contains the kernel asce - -In case of uaccess the kernel changes to: - -- primary space mode in case of a uaccess (copy_to_user) and uses - e.g. the mvcp instruction to access user space. However the kernel - will stay in home space mode if the mvcos instruction is available -- secondary space mode in case of futex atomic operations, so that the - instructions come from primary address space and data from secondary - space - -In case of KVM, the kernel runs in home space mode, but cr1 gets switched -to contain the gmap asce before the SIE instruction gets executed. When -the SIE instruction is finished, cr1 will be switched back to contain the -user asce. - - -Virtual Addresses on s/390 & z/Architecture -=========================================== - -A virtual address on s/390 is made up of 3 parts -The SX (segment index, roughly corresponding to the PGD & PMD in Linux -terminology) being bits 1-11. - -The PX (page index, corresponding to the page table entry (pte) in Linux -terminology) being bits 12-19. - -The remaining bits BX (the byte index are the offset in the page ) -i.e. bits 20 to 31. - -On z/Architecture in linux we currently make up an address from 4 parts. - -- The region index bits (RX) 0-32 we currently use bits 22-32 -- The segment index (SX) being bits 33-43 -- The page index (PX) being bits 44-51 -- The byte index (BX) being bits 52-63 - -Notes: - 1) s/390 has no PMD so the PMD is really the PGD also. - A lot of this stuff is defined in pgtable.h. - - 2) Also seeing as s/390's page indexes are only 1k in size - (bits 12-19 x 4 bytes per pte ) we use 1 ( page 4k ) - to make the best use of memory by updating 4 segment indices - entries each time we mess with a PMD & use offsets - 0,1024,2048 & 3072 in this page as for our segment indexes. - On z/Architecture our page indexes are now 2k in size - ( bits 12-19 x 8 bytes per pte ) we do a similar trick - but only mess with 2 segment indices each time we mess with - a PMD. - - 3) As z/Architecture supports up to a massive 5-level page table lookup we - can only use 3 currently on Linux ( as this is all the generic kernel - currently supports ) however this may change in future - this allows us to access ( according to my sums ) - 4TB of virtual storage per process i.e. - 4096*512(PTES)*1024(PMDS)*2048(PGD) = 4398046511104 bytes, - enough for another 2 or 3 of years I think :-). - to do this we use a region-third-table designation type in - our address space control registers. - - -The Linux for s/390 & z/Architecture Kernel Task Structure -========================================================== -Each process/thread under Linux for S390 has its own kernel task_struct -defined in linux/include/linux/sched.h -The S390 on initialisation & resuming of a process on a cpu sets -the __LC_KERNEL_STACK variable in the spare prefix area for this cpu -(which we use for per-processor globals). - -The kernel stack pointer is intimately tied with the task structure for -each processor as follows:: - - s/390 - ************************ - * 1 page kernel stack * - * ( 4K ) * - ************************ - * 1 page task_struct * - * ( 4K ) * - 8K aligned ************************ - - z/Architecture - ************************ - * 2 page kernel stack * - * ( 8K ) * - ************************ - * 2 page task_struct * - * ( 8K ) * - 16K aligned ************************ - -What this means is that we don't need to dedicate any register or global -variable to point to the current running process & can retrieve it with the -following very simple construct for s/390 & one very similar for -z/Architecture:: - - static inline struct task_struct * get_current(void) - { - struct task_struct *current; - __asm__("lhi %0,-8192\n\t" - "nr %0,15" - : "=r" (current) ); - return current; - } - -i.e. just anding the current kernel stack pointer with the mask -8192. -Thankfully because Linux doesn't have support for nested IO interrupts -& our devices have large buffers can survive interrupts being shut for -short amounts of time we don't need a separate stack for interrupts. - - - - -Register Usage & Stackframes on Linux for s/390 & z/Architecture -================================================================= -Overview: ---------- -This is the code that gcc produces at the top & the bottom of -each function. It usually is fairly consistent & similar from -function to function & if you know its layout you can probably -make some headway in finding the ultimate cause of a problem -after a crash without a source level debugger. - -Note: To follow stackframes requires a knowledge of C or Pascal & -limited knowledge of one assembly language. - -It should be noted that there are some differences between the -s/390 and z/Architecture stack layouts as the z/Architecture stack layout -didn't have to maintain compatibility with older linkage formats. - -Glossary: ---------- -alloca: - This is a built in compiler function for runtime allocation - of extra space on the callers stack which is obviously freed - up on function exit ( e.g. the caller may choose to allocate nothing - of a buffer of 4k if required for temporary purposes ), it generates - very efficient code ( a few cycles ) when compared to alternatives - like malloc. - -automatics: - These are local variables on the stack, i.e they aren't in registers & - they aren't static. - -back-chain: - This is a pointer to the stack pointer before entering a - framed functions ( see frameless function ) prologue got by - dereferencing the address of the current stack pointer, - i.e. got by accessing the 32 bit value at the stack pointers - current location. - -base-pointer: - This is a pointer to the back of the literal pool which - is an area just behind each procedure used to store constants - in each function. - -call-clobbered: - The caller probably needs to save these registers if there - is something of value in them, on the stack or elsewhere before making a - call to another procedure so that it can restore it later. - -epilogue: - The code generated by the compiler to return to the caller. - -frameless-function: - A frameless function in Linux for s390 & z/Architecture is one which doesn't - need more than the register save area (96 bytes on s/390, 160 on z/Architecture) - given to it by the caller. - - A frameless function never: - - 1) Sets up a back chain. - 2) Calls alloca. - 3) Calls other normal functions - 4) Has automatics. - -GOT-pointer: - This is a pointer to the global-offset-table in ELF - ( Executable Linkable Format, Linux'es most common executable format ), - all globals & shared library objects are found using this pointer. - -lazy-binding - ELF shared libraries are typically only loaded when routines in the shared - library are actually first called at runtime. This is lazy binding. - -procedure-linkage-table - This is a table found from the GOT which contains pointers to routines - in other shared libraries which can't be called to by easier means. - -prologue: - The code generated by the compiler to set up the stack frame. - -outgoing-args: - This is extra area allocated on the stack of the calling function if the - parameters for the callee's cannot all be put in registers, the same - area can be reused by each function the caller calls. - -routine-descriptor: - A COFF executable format based concept of a procedure reference - actually being 8 bytes or more as opposed to a simple pointer to the routine. - This is typically defined as follows: - - - Routine Descriptor offset 0=Pointer to Function - - Routine Descriptor offset 4=Pointer to Table of Contents - - The table of contents/TOC is roughly equivalent to a GOT pointer. - & it means that shared libraries etc. can be shared between several - environments each with their own TOC. - -static-chain: - This is used in nested functions a concept adopted from pascal - by gcc not used in ansi C or C++ ( although quite useful ), basically it - is a pointer used to reference local variables of enclosing functions. - You might come across this stuff once or twice in your lifetime. - - e.g. - - The function below should return 11 though gcc may get upset & toss warnings - about unused variables:: - - int FunctionA(int a) - { - int b; - FunctionC(int c) - { - b=c+1; - } - FunctionC(10); - return(b); - } - - -s/390 & z/Architecture Register usage -===================================== - -======== ========================================== =============== -r0 used by syscalls/assembly call-clobbered -r1 used by syscalls/assembly call-clobbered -r2 argument 0 / return value 0 call-clobbered -r3 argument 1 / return value 1 (if long long) call-clobbered -r4 argument 2 call-clobbered -r5 argument 3 call-clobbered -r6 argument 4 saved -r7 pointer-to arguments 5 to ... saved -r8 this & that saved -r9 this & that saved -r10 static-chain ( if nested function ) saved -r11 frame-pointer ( if function used alloca ) saved -r12 got-pointer saved -r13 base-pointer saved -r14 return-address saved -r15 stack-pointer saved - -f0 argument 0 / return value ( float/double ) call-clobbered -f2 argument 1 call-clobbered -f4 z/Architecture argument 2 saved -f6 z/Architecture argument 3 saved -======== ========================================== =============== - -The remaining floating points -f1,f3,f5 f7-f15 are call-clobbered. - -Notes: ------- -1) The only requirement is that registers which are used - by the callee are saved, e.g. the compiler is perfectly - capable of using r11 for purposes other than a frame a - frame pointer if a frame pointer is not needed. -2) In functions with variable arguments e.g. printf the calling procedure - is identical to one without variable arguments & the same number of - parameters. However, the prologue of this function is somewhat more - hairy owing to it having to move these parameters to the stack to - get va_start, va_arg & va_end to work. -3) Access registers are currently unused by gcc but are used in - the kernel. Possibilities exist to use them at the moment for - temporary storage but it isn't recommended. -4) Only 4 of the floating point registers are used for - parameter passing as older machines such as G3 only have only 4 - & it keeps the stack frame compatible with other compilers. - However with IEEE floating point emulation under linux on the - older machines you are free to use the other 12. -5) A long long or double parameter cannot be have the - first 4 bytes in a register & the second four bytes in the - outgoing args area. It must be purely in the outgoing args - area if crossing this boundary. -6) Floating point parameters are mixed with outgoing args - on the outgoing args area in the order the are passed in as parameters. -7) Floating point arguments 2 & 3 are saved in the outgoing args area for - z/Architecture - - -Stack Frame Layout ------------------- - -========= ============== ====================================================== -s/390 z/Architecture -========= ============== ====================================================== -0 0 back chain ( a 0 here signifies end of back chain ) -4 8 eos ( end of stack, not used on Linux for S390 used - in other linkage formats ) -8 16 glue used in other s/390 linkage formats for saved - routine descriptors etc. -12 24 glue used in other s/390 linkage formats for saved - routine descriptors etc. -16 32 scratch area -20 40 scratch area -24 48 saved r6 of caller function -28 56 saved r7 of caller function -32 64 saved r8 of caller function -36 72 saved r9 of caller function -40 80 saved r10 of caller function -44 88 saved r11 of caller function -48 96 saved r12 of caller function -52 104 saved r13 of caller function -56 112 saved r14 of caller function -60 120 saved r15 of caller function -64 128 saved f4 of caller function -72 132 saved f6 of caller function -80 undefined -96 160 outgoing args passed from caller to callee -96+x 160+x possible stack alignment ( 8 bytes desirable ) -96+x+y 160+x+y alloca space of caller ( if used ) -96+x+y+z 160+x+y+z automatics of caller ( if used ) -0 back-chain -========= ============== ====================================================== - -A sample program with comments. -=============================== - -Comments on the function test ------------------------------ -1) It didn't need to set up a pointer to the constant pool gpr13 as it is not - used ( :-( ). -2) This is a frameless function & no stack is bought. -3) The compiler was clever enough to recognise that it could return the - value in r2 as well as use it for the passed in parameter ( :-) ). -4) The basr ( branch relative & save ) trick works as follows the instruction - has a special case with r0,r0 with some instruction operands is understood as - the literal value 0, some risc architectures also do this ). So now - we are branching to the next address & the address new program counter is - in r13,so now we subtract the size of the function prologue we have executed - the size of the literal pool to get to the top of the literal pool:: - - - 0040037c int test(int b) - { # Function prologue below - 40037c: 90 de f0 34 stm %r13,%r14,52(%r15) # Save registers r13 & r14 - 400380: 0d d0 basr %r13,%r0 # Set up pointer to constant pool using - 400382: a7 da ff fa ahi %r13,-6 # basr trick - return(5+b); - # Huge main program - 400386: a7 2a 00 05 ahi %r2,5 # add 5 to r2 - - # Function epilogue below - 40038a: 98 de f0 34 lm %r13,%r14,52(%r15) # restore registers r13 & 14 - 40038e: 07 fe br %r14 # return - } - -Comments on the function main ------------------------------ -1) The compiler did this function optimally ( 8-) ):: - - Literal pool for main. - 400390: ff ff ff ec .long 0xffffffec - main(int argc,char *argv[]) - { # Function prologue below - 400394: 90 bf f0 2c stm %r11,%r15,44(%r15) # Save necessary registers - 400398: 18 0f lr %r0,%r15 # copy stack pointer to r0 - 40039a: a7 fa ff a0 ahi %r15,-96 # Make area for callee saving - 40039e: 0d d0 basr %r13,%r0 # Set up r13 to point to - 4003a0: a7 da ff f0 ahi %r13,-16 # literal pool - 4003a4: 50 00 f0 00 st %r0,0(%r15) # Save backchain - - return(test(5)); # Main Program Below - 4003a8: 58 e0 d0 00 l %r14,0(%r13) # load relative address of test from - # literal pool - 4003ac: a7 28 00 05 lhi %r2,5 # Set first parameter to 5 - 4003b0: 4d ee d0 00 bas %r14,0(%r14,%r13) # jump to test setting r14 as return - # address using branch & save instruction. - - # Function Epilogue below - 4003b4: 98 bf f0 8c lm %r11,%r15,140(%r15)# Restore necessary registers. - 4003b8: 07 fe br %r14 # return to do program exit - } - - -Compiler updates ----------------- - -:: - - main(int argc,char *argv[]) - { - 4004fc: 90 7f f0 1c stm %r7,%r15,28(%r15) - 400500: a7 d5 00 04 bras %r13,400508 - 400504: 00 40 04 f4 .long 0x004004f4 - # compiler now puts constant pool in code to so it saves an instruction - 400508: 18 0f lr %r0,%r15 - 40050a: a7 fa ff a0 ahi %r15,-96 - 40050e: 50 00 f0 00 st %r0,0(%r15) - return(test(5)); - 400512: 58 10 d0 00 l %r1,0(%r13) - 400516: a7 28 00 05 lhi %r2,5 - 40051a: 0d e1 basr %r14,%r1 - # compiler adds 1 extra instruction to epilogue this is done to - # avoid processor pipeline stalls owing to data dependencies on g5 & - # above as register 14 in the old code was needed directly after being loaded - # by the lm %r11,%r15,140(%r15) for the br %14. - 40051c: 58 40 f0 98 l %r4,152(%r15) - 400520: 98 7f f0 7c lm %r7,%r15,124(%r15) - 400524: 07 f4 br %r4 - } - - -Hartmut ( our compiler developer ) also has been threatening to take out the -stack backchain in optimised code as this also causes pipeline stalls, you -have been warned. - -64 bit z/Architecture code disassembly --------------------------------------- - -If you understand the stuff above you'll understand the stuff -below too so I'll avoid repeating myself & just say that -some of the instructions have g's on the end of them to indicate -they are 64 bit & the stack offsets are a bigger, -the only other difference you'll find between 32 & 64 bit is that -we now use f4 & f6 for floating point arguments on 64 bit:: - - 00000000800005b0 : - int test(int b) - { - return(5+b); - 800005b0: a7 2a 00 05 ahi %r2,5 - 800005b4: b9 14 00 22 lgfr %r2,%r2 # downcast to integer - 800005b8: 07 fe br %r14 - 800005ba: 07 07 bcr 0,%r7 - - - } - - 00000000800005bc
: - main(int argc,char *argv[]) - { - 800005bc: eb bf f0 58 00 24 stmg %r11,%r15,88(%r15) - 800005c2: b9 04 00 1f lgr %r1,%r15 - 800005c6: a7 fb ff 60 aghi %r15,-160 - 800005ca: e3 10 f0 00 00 24 stg %r1,0(%r15) - return(test(5)); - 800005d0: a7 29 00 05 lghi %r2,5 - # brasl allows jumps > 64k & is overkill here bras would do fune - 800005d4: c0 e5 ff ff ff ee brasl %r14,800005b0 - 800005da: e3 40 f1 10 00 04 lg %r4,272(%r15) - 800005e0: eb bf f0 f8 00 04 lmg %r11,%r15,248(%r15) - 800005e6: 07 f4 br %r4 - } - - - -Compiling programs for debugging on Linux for s/390 & z/Architecture -==================================================================== --gdwarf-2 now works it should be considered the default debugging -format for s/390 & z/Architecture as it is more reliable for debugging -shared libraries, normal -g debugging works much better now -Thanks to the IBM java compiler developers bug reports. - -This is typically done adding/appending the flags -g or -gdwarf-2 to the -CFLAGS & LDFLAGS variables Makefile of the program concerned. - -If using gdb & you would like accurate displays of registers & -stack traces compile without optimisation i.e make sure -that there is no -O2 or similar on the CFLAGS line of the Makefile & -the emitted gcc commands, obviously this will produce worse code -( not advisable for shipment ) but it is an aid to the debugging process. - -This aids debugging because the compiler will copy parameters passed in -in registers onto the stack so backtracing & looking at passed in -parameters will work, however some larger programs which use inline functions -will not compile without optimisation. - -Debugging with optimisation has since much improved after fixing -some bugs, please make sure you are using gdb-5.0 or later developed -after Nov'2000. - - - -Debugging under VM -================== - -Notes ------ -Addresses & values in the VM debugger are always hex never decimal -Address ranges are of the format - or -. -For example, the address range 0x2000 to 0x3000 can be described as 2000-3000 -or 2000.1000 - -The VM Debugger is case insensitive. - -VM's strengths are usually other debuggers weaknesses you can get at any -resource no matter how sensitive e.g. memory management resources, change -address translation in the PSW. For kernel hacking you will reap dividends if -you get good at it. - -The VM Debugger displays operators but not operands, and also the debugger -displays useful information on the same line as the author of the code probably -felt that it was a good idea not to go over the 80 columns on the screen. -This isn't as unintuitive as it may seem as the s/390 instructions are easy to -decode mentally and you can make a good guess at a lot of them as all the -operands are nibble (half byte aligned). -So if you have an objdump listing by hand, it is quite easy to follow, and if -you don't have an objdump listing keep a copy of the s/390 Reference Summary -or alternatively the s/390 principles of operation next to you. -e.g. even I can guess that -0001AFF8' LR 180F CC 0 -is a ( load register ) lr r0,r15 - -Also it is very easy to tell the length of a 390 instruction from the 2 most -significant bits in the instruction (not that this info is really useful except -if you are trying to make sense of a hexdump of code). -Here is a table - -======================= ================== -Bits Instruction Length -======================= ================== -00 2 Bytes -01 4 Bytes -10 4 Bytes -11 6 Bytes -======================= ================== - -The debugger also displays other useful info on the same line such as the -addresses being operated on destination addresses of branches & condition codes. -e.g.:: - - 00019736' AHI A7DAFF0E CC 1 - 000198BA' BRC A7840004 -> 000198C2' CC 0 - 000198CE' STM 900EF068 >> 0FA95E78 CC 2 - - - -Useful VM debugger commands ---------------------------- - -I suppose I'd better mention this before I start -to list the current active traces do:: - - Q TR - -there can be a maximum of 255 of these per set -( more about trace sets later ). - -To stop traces issue a:: - - TR END. - -To delete a particular breakpoint issue:: - - TR DEL - -The PA1 key drops to CP mode so you can issue debugger commands, -Doing alt c (on my 3270 console at least ) clears the screen. - -hitting b comes back to the running operating system -from cp mode ( in our case linux ). - -It is typically useful to add shortcuts to your profile.exec file -if you have one ( this is roughly equivalent to autoexec.bat in DOS ). -file here are a few from mine:: - - /* this gives me command history on issuing f12 */ - set pf12 retrieve - /* this continues */ - set pf8 imm b - /* goes to trace set a */ - set pf1 imm tr goto a - /* goes to trace set b */ - set pf2 imm tr goto b - /* goes to trace set c */ - set pf3 imm tr goto c - - - -Instruction Tracing -------------------- -Setting a simple breakpoint:: - - TR I PSWA
- -To debug a particular function try:: - - TR I R - TR I on its own will single step. - TR I DATA will trace for particular mnemonics - -e.g.:: - - TR I DATA 4D R 0197BC.4000 - -will trace for BAS'es ( opcode 4D ) in the range 0197BC.4000 - -if you were inclined you could add traces for all branch instructions & -suffix them with the run prefix so you would have a backtrace on screen -when a program crashes:: - - TR BR will trace branches into or out of an address. - -e.g.:: - - TR BR INTO 0 - -is often quite useful if a program is getting awkward & deciding -to branch to 0 & crashing as this will stop at the address before in jumps to 0. - -:: - - TR I R
RUN cmd d g - -single steps a range of addresses but stays running & -displays the gprs on each step. - - - -Displaying & modifying Registers --------------------------------- -D G - will display all the gprs - -Adding a extra G to all the commands is necessary to access the full 64 bit -content in VM on z/Architecture. Obviously this isn't required for access -registers as these are still 32 bit. - -e.g. - -DGG - instead of DG - -D X - will display all the control registers -D AR - will display all the access registers -D AR4-7 - will display access registers 4 to 7 -CPU ALL D G - will display the GRPS of all CPUS in the configuration -D PSW - will display the current PSW -st PSW 2000 - will put the value 2000 into the PSW & cause crash your machine. -D PREFIX - displays the prefix offset - - -Displaying Memory ------------------ -To display memory mapped using the current PSW's mapping try:: - - D - -To make VM display a message each time it hits a particular address and -continue try: - -D I - will disassemble/display a range of instructions. - -ST addr 32 bit word - will store a 32 bit aligned address -D T - will display the EBCDIC in an address (if you are that way inclined) -D R - will display real addresses ( without DAT ) but with prefixing. - -There are other complex options to display if you need to get at say home space -but are in primary space the easiest thing to do is to temporarily -modify the PSW to the other addressing mode, display the stuff & then -restore it. - - - -Hints ------ -If you want to issue a debugger command without halting your virtual machine -with the PA1 key try prefixing the command with #CP e.g.:: - - #cp tr i pswa 2000 - -also suffixing most debugger commands with RUN will cause them not -to stop just display the mnemonic at the current instruction on the console. - -If you have several breakpoints you want to put into your program & -you get fed up of cross referencing with System.map -you can do the following trick for several symbols. - -:: - - grep do_signal System.map - -which emits the following among other things:: - - 0001f4e0 T do_signal - -now you can do:: - - TR I PSWA 0001f4e0 cmd msg * do_signal - -This sends a message to your own console each time do_signal is entered. -( As an aside I wrote a perl script once which automatically generated a REXX -script with breakpoints on every kernel procedure, this isn't a good idea -because there are thousands of these routines & VM can only set 255 breakpoints -at a time so you nearly had to spend as long pruning the file down as you would -entering the msgs by hand), however, the trick might be useful for a single -object file. In the 3270 terminal emulator x3270 there is a very useful option -in the file menu called "Save Screen In File" - this is very good for keeping a -copy of traces. - -From CMS help will give you online help on a particular command. -e.g.:: - - HELP DISPLAY - -Also CP has a file called profile.exec which automatically gets called -on startup of CMS ( like autoexec.bat ), keeping on a DOS analogy session -CP has a feature similar to doskey, it may be useful for you to -use profile.exec to define some keystrokes. - -SET PF9 IMM B - This does a single step in VM on pressing F8. - -SET PF10 ^ - This sets up the ^ key. - which can be used for ^c (ctrl-c),^z (ctrl-z) which can't be typed - directly into some 3270 consoles. - -SET PF11 ^- - This types the starting keystrokes for a sysrq see SysRq below. -SET PF12 RETRIEVE - This retrieves command history on pressing F12. - - -Sometimes in VM the display is set up to scroll automatically this -can be very annoying if there are messages you wish to look at -to stop this do - -TERM MORE 255 255 - This will nearly stop automatic screen updates, however it will - cause a denial of service if lots of messages go to the 3270 console, - so it would be foolish to use this as the default on a production machine. - - -Tracing particular processes ----------------------------- -The kernel's text segment is intentionally at an address in memory that it will -very seldom collide with text segments of user programs ( thanks Martin ), -this simplifies debugging the kernel. -However it is quite common for user processes to have addresses which collide -this can make debugging a particular process under VM painful under normal -circumstances as the process may change when doing a:: - - TR I R
. - -Thankfully after reading VM's online help I figured out how to debug -I particular process. - -Your first problem is to find the STD ( segment table designation ) -of the program you wish to debug. -There are several ways you can do this here are a few - -Run:: - - objdump --syms | grep main - -To get the address of main in the program. Then:: - - tr i pswa
- -Start the program, if VM drops to CP on what looks like the entry -point of the main function this is most likely the process you wish to debug. -Now do a D X13 or D XG13 on z/Architecture. - -On 31 bit the STD is bits 1-19 ( the STO segment table origin ) -& 25-31 ( the STL segment table length ) of CR13. - -now type:: - - TR I R STD 0.7fffffff - -e.g.:: - - TR I R STD 8F32E1FF 0.7fffffff - -Another very useful variation is:: - - TR STORE INTO STD
- -for finding out when a particular variable changes. - -An alternative way of finding the STD of a currently running process -is to do the following, ( this method is more complex but -could be quite convenient if you aren't updating the kernel much & -so your kernel structures will stay constant for a reasonable period of -time ). - -:: - - grep task /proc//status - -from this you should see something like:: - - task: 0f160000 ksp: 0f161de8 pt_regs: 0f161f68 - -This now gives you a pointer to the task structure. - -Now make:: - - CC:="s390-gcc -g" kernel/sched.s - -To get the task_struct stabinfo. - -( task_struct is defined in include/linux/sched.h ). - -Now we want to look at -task->active_mm->pgd - -on my machine the active_mm in the task structure stab is -active_mm:(4,12),672,32 - -its offset is 672/8=84=0x54 - -the pgd member in the mm_struct stab is -pgd:(4,6)=*(29,5),96,32 -so its offset is 96/8=12=0xc - -so we'll:: - - hexdump -s 0xf160054 /dev/mem | more - -i.e. task_struct+active_mm offset -to look at the active_mm member:: - - f160054 0fee cc60 0019 e334 0000 0000 0000 0011 - -:: - - hexdump -s 0x0feecc6c /dev/mem | more - -i.e. active_mm+pgd offset:: - - feecc6c 0f2c 0000 0000 0001 0000 0001 0000 0010 - -we get something like -now do:: - - TR I R STD 0.7fffffff - -i.e. the 0x7f is added because the pgd only -gives the page table origin & we need to set the low bits -to the maximum possible segment table length. - -:: - - TR I R STD 0f2c007f 0.7fffffff - -on z/Architecture you'll probably need to do:: - - TR I R STD 0.ffffffffffffffff - -to set the TableType to 0x1 & the Table length to 3. - - - -Tracing Program Exceptions --------------------------- -If you get a crash which says something like -illegal operation or specification exception followed by a register dump -You can restart linux & trace these using the tr prog trace -option. - - -The most common ones you will normally be tracing for is: - -- 1=operation exception -- 2=privileged operation exception -- 4=protection exception -- 5=addressing exception -- 6=specification exception -- 10=segment translation exception -- 11=page translation exception - -The full list of these is on page 22 of the current s/390 Reference Summary. -e.g. - -tr prog 10 will trace segment translation exceptions. - -tr prog on its own will trace all program interruption codes. - -Trace Sets ----------- -On starting VM you are initially in the INITIAL trace set. -You can do a Q TR to verify this. -If you have a complex tracing situation where you wish to wait for instance -till a driver is open before you start tracing IO, but know in your -heart that you are going to have to make several runs through the code till you -have a clue whats going on. - -What you can do is:: - - TR I PSWA - -hit b to continue till breakpoint - -reach the breakpoint - -now do your:: - - TR GOTO B - TR IO 7c08-7c09 inst int run - -or whatever the IO channels you wish to trace are & hit b - -To got back to the initial trace set do:: - - TR GOTO INITIAL - -& the TR I PSWA will be the only active breakpoint again. - - -Tracing linux syscalls under VM -------------------------------- -Syscalls are implemented on Linux for S390 by the Supervisor call instruction -(SVC). There 256 possibilities of these as the instruction is made up of a 0xA -opcode and the second byte being the syscall number. They are traced using the -simple command:: - - TR SVC - -the syscalls are defined in linux/arch/s390/include/asm/unistd.h -e.g. to trace all file opens just do:: - - TR SVC 5 ( as this is the syscall number of open ) - - -SMP Specific commands ---------------------- -To find out how many cpus you have -Q CPUS displays all the CPU's available to your virtual machine -To find the cpu that the current cpu VM debugger commands are being directed at -do Q CPU to change the current cpu VM debugger commands are being directed at -do:: - - CPU - -On a SMP guest issue a command to all CPUs try prefixing the command with cpu -all. To issue a command to a particular cpu try cpu e.g.:: - - CPU 01 TR I R 2000.3000 - -If you are running on a guest with several cpus & you have a IO related problem -& cannot follow the flow of code but you know it isn't smp related. - -from the bash prompt issue:: - - shutdown -h now or halt. - -do a:: - - Q CPUS - -to find out how many cpus you have detach each one of them from cp except -cpu 0 by issuing a:: - - DETACH CPU 01-(number of cpus in configuration) - -& boot linux again. - -TR SIGP - will trace inter processor signal processor instructions. - -DEFINE CPU 01-(number in configuration) - will get your guests cpus back. - - -Help for displaying ascii textstrings -------------------------------------- -On the very latest VM Nucleus'es VM can now display ascii -( thanks Neale for the hint ) by doing:: - - D TX. - -e.g.:: - - D TX0.100 - -Alternatively -============= -Under older VM debuggers (I love EBDIC too) you can use following little -program which converts a command line of hex digits to ascii text. It can be -compiled under linux and you can copy the hex digits from your x3270 terminal -to your xterm if you are debugging from a linuxbox. - -This is quite useful when looking at a parameter passed in as a text string -under VM ( unless you are good at decoding ASCII in your head ). - -e.g. consider tracing an open syscall:: - - TR SVC 5 - -We have stopped at a breakpoint:: - - 000151B0' SVC 0A05 -> 0001909A' CC 0 - -D 20.8 to check the SVC old psw in the prefix area and see was it from userspace -(for the layout of the prefix area consult the "Fixed Storage Locations" -chapter of the s/390 Reference Summary if you have it available). - -:: - - V00000020 070C2000 800151B2 - -The problem state bit wasn't set & it's also too early in the boot sequence -for it to be a userspace SVC if it was we would have to temporarily switch the -psw to user space addressing so we could get at the first parameter of the open -in gpr2. - -Next do a:: - - D G2 - GPR 2 = 00014CB4 - -Now display what gpr2 is pointing to:: - - D 00014CB4.20 - V00014CB4 2F646576 2F636F6E 736F6C65 00001BF5 - V00014CC4 FC00014C B4001001 E0001000 B8070707 - -Now copy the text till the first 00 hex ( which is the end of the string -to an xterm & do hex2ascii on it:: - - hex2ascii 2F646576 2F636F6E 736F6C65 00 - -outputs:: - - Decoded Hex:=/ d e v / c o n s o l e 0x00 - -We were opening the console device, - -You can compile the code below yourself for practice :-), - -:: - - /* - * hex2ascii.c - * a useful little tool for converting a hexadecimal command line to ascii - * - * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) - * (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation. - */ - #include - - int main(int argc,char *argv[]) - { - int cnt1,cnt2,len,toggle=0; - int startcnt=1; - unsigned char c,hex; - - if(argc>1&&(strcmp(argv[1],"-a")==0)) - startcnt=2; - printf("Decoded Hex:="); - for(cnt1=startcnt;cnt1='0'&&c<='9') - c=c-'0'; - if(c>='A'&&c<='F') - c=c-'A'+10; - if(c>='a'&&c<='f') - c=c-'a'+10; - switch(toggle) - { - case 0: - hex=c<<4; - toggle=1; - break; - case 1: - hex+=c; - if(hex<32||hex>127) - { - if(startcnt==1) - printf("0x%02X ",(int)hex); - else - printf("."); - } - else - { - printf("%c",hex); - if(startcnt==1) - printf(" "); - } - toggle=0; - break; - } - } - } - printf("\n"); - } - - - - -Stack tracing under VM ----------------------- -A basic backtrace ------------------ - -Here are the tricks I use 9 out of 10 times it works pretty well, - -When your backchain reaches a dead end --------------------------------------- -This can happen when an exception happens in the kernel and the kernel is -entered twice. If you reach the NULL pointer at the end of the back chain you -should be able to sniff further back if you follow the following tricks. -1) A kernel address should be easy to recognise since it is in -primary space & the problem state bit isn't set & also -The Hi bit of the address is set. -2) Another backchain should also be easy to recognise since it is an -address pointing to another address approximately 100 bytes or 0x70 hex -behind the current stackpointer. - - -Here is some practice. - -boot the kernel & hit PA1 at some random time - -d g to display the gprs, this should display something like:: - - GPR 0 = 00000001 00156018 0014359C 00000000 - GPR 4 = 00000001 001B8888 000003E0 00000000 - GPR 8 = 00100080 00100084 00000000 000FE000 - GPR 12 = 00010400 8001B2DC 8001B36A 000FFED8 - -Note that GPR14 is a return address but as we are real men we are going to -trace the stack. -display 0x40 bytes after the stack pointer:: - - V000FFED8 000FFF38 8001B838 80014C8E 000FFF38 - V000FFEE8 00000000 00000000 000003E0 00000000 - V000FFEF8 00100080 00100084 00000000 000FE000 - V000FFF08 00010400 8001B2DC 8001B36A 000FFED8 - - -Ah now look at whats in sp+56 (sp+0x38) this is 8001B36A our saved r14 if -you look above at our stackframe & also agrees with GPR14. - -now backchain:: - - d 000FFF38.40 - -we now are taking the contents of SP to get our first backchain:: - - V000FFF38 000FFFA0 00000000 00014995 00147094 - V000FFF48 00147090 001470A0 000003E0 00000000 - V000FFF58 00100080 00100084 00000000 001BF1D0 - V000FFF68 00010400 800149BA 80014CA6 000FFF38 - -This displays a 2nd return address of 80014CA6 - -now do:: - - d 000FFFA0.40 - -for our 3rd backchain:: - - V000FFFA0 04B52002 0001107F 00000000 00000000 - V000FFFB0 00000000 00000000 FF000000 0001107F - V000FFFC0 00000000 00000000 00000000 00000000 - V000FFFD0 00010400 80010802 8001085A 000FFFA0 - - -our 3rd return address is 8001085A - -as the 04B52002 looks suspiciously like rubbish it is fair to assume that the -kernel entry routines for the sake of optimisation don't set up a backchain. - -now look at System.map to see if the addresses make any sense:: - - grep -i 0001b3 System.map - -outputs among other things:: - - 0001b304 T cpu_idle - -so 8001B36A -is cpu_idle+0x66 ( quiet the cpu is asleep, don't wake it ) - -:: - - grep -i 00014 System.map - -produces among other things:: - - 00014a78 T start_kernel - -so 0014CA6 is start_kernel+some hex number I can't add in my head. - -:: - - grep -i 00108 System.map - -this produces:: - - 00010800 T _stext - -so 8001085A is _stext+0x5a - -Congrats you've done your first backchain. - - - -s/390 & z/Architecture IO Overview -================================== - -I am not going to give a course in 390 IO architecture as this would take me -quite a while and I'm no expert. Instead I'll give a 390 IO architecture -summary for Dummies. If you have the s/390 principles of operation available -read this instead. If nothing else you may find a few useful keywords in here -and be able to use them on a web search engine to find more useful information. - -Unlike other bus architectures modern 390 systems do their IO using mostly -fibre optics and devices such as tapes and disks can be shared between several -mainframes. Also S390 can support up to 65536 devices while a high end PC based -system might be choking with around 64. - -Here is some of the common IO terminology: - -Subchannel: - This is the logical number most IO commands use to talk to an IO device. There - can be up to 0x10000 (65536) of these in a configuration, typically there are a - few hundred. Under VM for simplicity they are allocated contiguously, however - on the native hardware they are not. They typically stay consistent between - boots provided no new hardware is inserted or removed. - - Under Linux for s390 we use these as IRQ's and also when issuing an IO command - (CLEAR SUBCHANNEL, HALT SUBCHANNEL, MODIFY SUBCHANNEL, RESUME SUBCHANNEL, - START SUBCHANNEL, STORE SUBCHANNEL and TEST SUBCHANNEL). We use this as the ID - of the device we wish to talk to. The most important of these instructions are - START SUBCHANNEL (to start IO), TEST SUBCHANNEL (to check whether the IO - completed successfully) and HALT SUBCHANNEL (to kill IO). A subchannel can have - up to 8 channel paths to a device, this offers redundancy if one is not - available. - -Device Number: - This number remains static and is closely tied to the hardware. There are 65536 - of these, made up of a CHPID (Channel Path ID, the most significant 8 bits) and - another lsb 8 bits. These remain static even if more devices are inserted or - removed from the hardware. There is a 1 to 1 mapping between subchannels and - device numbers, provided devices aren't inserted or removed. - -Channel Control Words: - CCWs are linked lists of instructions initially pointed to by an operation - request block (ORB), which is initially given to Start Subchannel (SSCH) - command along with the subchannel number for the IO subsystem to process - while the CPU continues executing normal code. - CCWs come in two flavours, Format 0 (24 bit for backward compatibility) and - Format 1 (31 bit). These are typically used to issue read and write (and many - other) instructions. They consist of a length field and an absolute address - field. - - Each IO typically gets 1 or 2 interrupts, one for channel end (primary status) - when the channel is idle, and the second for device end (secondary status). - Sometimes you get both concurrently. You check how the IO went on by issuing a - TEST SUBCHANNEL at each interrupt, from which you receive an Interruption - response block (IRB). If you get channel and device end status in the IRB - without channel checks etc. your IO probably went okay. If you didn't you - probably need to examine the IRB, extended status word etc. - If an error occurs, more sophisticated control units have a facility known as - concurrent sense. This means that if an error occurs Extended sense information - will be presented in the Extended status word in the IRB. If not you have to - issue a subsequent SENSE CCW command after the test subchannel. - - -TPI (Test pending interrupt) can also be used for polled IO, but in -multitasking multiprocessor systems it isn't recommended except for -checking special cases (i.e. non looping checks for pending IO etc.). - -Store Subchannel and Modify Subchannel can be used to examine and modify -operating characteristics of a subchannel (e.g. channel paths). - -Other IO related Terms: - -Sysplex: - S390's Clustering Technology -QDIO: - S390's new high speed IO architecture to support devices such as gigabit - ethernet, this architecture is also designed to be forward compatible with - upcoming 64 bit machines. - - -General Concepts ----------------- - -Input Output Processors (IOP's) are responsible for communicating between -the mainframe CPU's & the channel & relieve the mainframe CPU's from the -burden of communicating with IO devices directly, this allows the CPU's to -concentrate on data processing. - -IOP's can use one or more links ( known as channel paths ) to talk to each -IO device. It first checks for path availability & chooses an available one, -then starts ( & sometimes terminates IO ). -There are two types of channel path: ESCON & the Parallel IO interface. - -IO devices are attached to control units, control units provide the -logic to interface the channel paths & channel path IO protocols to -the IO devices, they can be integrated with the devices or housed separately -& often talk to several similar devices ( typical examples would be raid -controllers or a control unit which connects to 1000 3270 terminals ):: - - - +---------------------------------------------------------------+ - | +-----+ +-----+ +-----+ +-----+ +----------+ +----------+ | - | | CPU | | CPU | | CPU | | CPU | | Main | | Expanded | | - | | | | | | | | | | Memory | | Storage | | - | +-----+ +-----+ +-----+ +-----+ +----------+ +----------+ | - |---------------------------------------------------------------+ - | IOP | IOP | IOP | - |--------------------------------------------------------------- - | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C | - ---------------------------------------------------------------- - || || - || Bus & Tag Channel Path || ESCON - || ====================== || Channel - || || || || Path - +----------+ +----------+ +----------+ - | | | | | | - | CU | | CU | | CU | - | | | | | | - +----------+ +----------+ +----------+ - | | | | | - +----------+ +----------+ +----------+ +----------+ +----------+ - |I/O Device| |I/O Device| |I/O Device| |I/O Device| |I/O Device| - +----------+ +----------+ +----------+ +----------+ +----------+ - CPU = Central Processing Unit - C = Channel - IOP = IP Processor - CU = Control Unit - -The 390 IO systems come in 2 flavours the current 390 machines support both - -The Older 360 & 370 Interface,sometimes called the Parallel I/O interface, -sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers -Interface (OEMI). - -This byte wide Parallel channel path/bus has parity & data on the "Bus" cable -and control lines on the "Tag" cable. These can operate in byte multiplex mode -for sharing between several slow devices or burst mode and monopolize the -channel for the whole burst. Up to 256 devices can be addressed on one of these -cables. These cables are about one inch in diameter. The maximum unextended -length supported by these cables is 125 Meters but this can be extended up to -2km with a fibre optic channel extended such as a 3044. The maximum burst speed -supported is 4.5 megabytes per second. However, some really old processors -support only transfer rates of 3.0, 2.0 & 1.0 MB/sec. -One of these paths can be daisy chained to up to 8 control units. - - -ESCON if fibre optic it is also called FICON -Was introduced by IBM in 1990. Has 2 fibre optic cables and uses either leds or -lasers for communication at a signaling rate of up to 200 megabits/sec. As -10bits are transferred for every 8 bits info this drops to 160 megabits/sec -and to 18.6 Megabytes/sec once control info and CRC are added. ESCON only -operates in burst mode. - -ESCONs typical max cable length is 3km for the led version and 20km for the -laser version known as XDF (extended distance facility). This can be further -extended by using an ESCON director which triples the above mentioned ranges. -Unlike Bus & Tag as ESCON is serial it uses a packet switching architecture, -the standard Bus & Tag control protocol is however present within the packets. -Up to 256 devices can be attached to each control unit that uses one of these -interfaces. - -Common 390 Devices include: -Network adapters typically OSA2,3172's,2116's & OSA-E gigabit ethernet adapters, -Consoles 3270 & 3215 (a teletype emulated under linux for a line mode console). -DASD's direct access storage devices ( otherwise known as hard disks ). -Tape Drives. -CTC ( Channel to Channel Adapters ), -ESCON or Parallel Cables used as a very high speed serial link -between 2 machines. - - -Debugging IO on s/390 & z/Architecture under VM -=============================================== - -Now we are ready to go on with IO tracing commands under VM - -A few self explanatory queries:: - - Q OSA - Q CTC - Q DISK ( This command is CMS specific ) - Q DASD - -Q OSA on my machine returns:: - - OSA 7C08 ON OSA 7C08 SUBCHANNEL = 0000 - OSA 7C09 ON OSA 7C09 SUBCHANNEL = 0001 - OSA 7C14 ON OSA 7C14 SUBCHANNEL = 0002 - OSA 7C15 ON OSA 7C15 SUBCHANNEL = 0003 - -If you have a guest with certain privileges you may be able to see devices -which don't belong to you. To avoid this, add the option V. -e.g.:: - - Q V OSA - -Now using the device numbers returned by this command we will -Trace the io starting up on the first device 7c08 & 7c09 -In our simplest case we can trace the -start subchannels -like TR SSCH 7C08-7C09 -or the halt subchannels -or TR HSCH 7C08-7C09 -MSCH's ,STSCH's I think you can guess the rest - -A good trick is tracing all the IO's and CCWS and spooling them into the reader -of another VM guest so he can ftp the logfile back to his own machine. I'll do -a small bit of this and give you a look at the output. - -1) Spool stdout to VM reader:: - - SP PRT TO (another vm guest ) or * for the local vm guest - -2) Fill the reader with the trace:: - - TR IO 7c08-7c09 INST INT CCW PRT RUN - -3) Start up linux:: - - i 00c -4) Finish the trace:: - - TR END - -5) close the reader:: - - C PRT - -6) list reader contents:: - - RDRLIST - -7) copy it to linux4's minidisk:: - - RECEIVE / LOG TXT A1 ( replace - -8) -filel & press F11 to look at it -You should see something like:: - - 00020942' SSCH B2334000 0048813C CC 0 SCH 0000 DEV 7C08 - CPA 000FFDF0 PARM 00E2C9C4 KEY 0 FPI C0 LPM 80 - CCW 000FFDF0 E4200100 00487FE8 0000 E4240100 ........ - IDAL 43D8AFE8 - IDAL 0FB76000 - 00020B0A' I/O DEV 7C08 -> 000197BC' SCH 0000 PARM 00E2C9C4 - 00021628' TSCH B2354000 >> 00488164 CC 0 SCH 0000 DEV 7C08 - CCWA 000FFDF8 DEV STS 0C SCH STS 00 CNT 00EC - KEY 0 FPI C0 CC 0 CTLS 4007 - 00022238' STSCH B2344000 >> 00488108 CC 0 SCH 0000 DEV 7C08 - -If you don't like messing up your readed ( because you possibly booted from it ) -you can alternatively spool it to another readers guest. - - -Other common VM device related commands ---------------------------------------------- -These commands are listed only because they have -been of use to me in the past & may be of use to -you too. For more complete info on each of the commands -use type HELP from CMS. - -detaching devices:: - - DET - ATT - -attach a device to guest * for your own guest - -READY - cause VM to issue a fake interrupt. - -The VARY command is normally only available to VM administrators:: - - VARY ON PATH TO - VARY OFF PATH FROM - -This is used to switch on or off channel paths to devices. - -Q CHPID - This displays state of devices using this channel path - -D SCHIB - This displays the subchannel information SCHIB block for the device. - this I believe is also only available to administrators. - -DEFINE CTC - defines a virtual CTC channel to channel connection - 2 need to be defined on each guest for the CTC driver to use. - -COUPLE devno userid remote devno - Joins a local virtual device to a remote virtual device - ( commonly used for the CTC driver ). - -Building a VM ramdisk under CMS which linux can use:: - - def vfb- - -blocksize is commonly 4096 for linux. - -Formatting it:: - - format (blksize - -Sharing a disk between multiple guests:: - - LINK userid devno1 devno2 mode password - - - -GDB on S390 -=========== -N.B. if compiling for debugging gdb works better without optimisation -( see Compiling programs for debugging ) - -invocation ----------- -gdb - -Online help ------------ -help: gives help on commands - -e.g.:: - - help - help display - -Note gdb's online help is very good use it. - - -Assembly --------- -info registers: - displays registers other than floating point. - -info all-registers: - displays floating points as well. - -disassemble: - disassembles - -e.g.:: - - disassemble without parameters will disassemble the current function - disassemble $pc $pc+10 - -Viewing & modifying variables ------------------------------ -print or p: - displays variable or register - -e.g. p/x $sp will display the stack pointer - -display: - prints variable or register each time program stops - -e.g.:: - - display/x $pc will display the program counter - display argc - -undisplay: - undo's display's - -info breakpoints: - shows all current breakpoints - -info stack: - shows stack back trace (if this doesn't work too well, I'll show - you the stacktrace by hand below). - -info locals: - displays local variables. - -info args: - display current procedure arguments. - -set args: - will set argc & argv each time the victim program is invoked - -e.g.:: - - set =value - set argc=100 - set $pc=0 - - - -Modifying execution -------------------- -step: - steps n lines of sourcecode - -step - steps 1 line. - -step 100 - steps 100 lines of code. - -next: - like step except this will not step into subroutines - -stepi: - steps a single machine code instruction. - -e.g.:: - - stepi 100 - -nexti: - steps a single machine code instruction but will not step into - subroutines. - -finish: - will run until exit of the current routine - -run: - (re)starts a program - -cont: - continues a program - -quit: - exits gdb. - - -breakpoints ------------- - -break - sets a breakpoint - -e.g.:: - - break main - break *$pc - break *0x400618 - -Here's a really useful one for large programs - -rbr - Set a breakpoint for all functions matching REGEXP - -e.g.:: - - rbr 390 - -will set a breakpoint with all functions with 390 in their name. - -info breakpoints - lists all breakpoints - -delete: - delete breakpoint by number or delete them all - -e.g. - -delete 1 - will delete the first breakpoint - - -delete - will delete them all - -watch: - This will set a watchpoint ( usually hardware assisted ), - -This will watch a variable till it changes - -e.g. - -watch cnt - will watch the variable cnt till it changes. - -As an aside unfortunately gdb's, architecture independent watchpoint code -is inconsistent & not very good, watchpoints usually work but not always. - -info watchpoints: - Display currently active watchpoints - -condition: ( another useful one ) - Specify breakpoint number N to break only if COND is true. - -Usage is `condition N COND`, where N is an integer and COND is an -expression to be evaluated whenever breakpoint N is reached. - - - -User defined functions/macros ------------------------------ -define: ( Note this is very very useful,simple & powerful ) - -usage define end - -examples which you should consider putting into .gdbinit in your home -directory:: - - define d - stepi - disassemble $pc $pc+10 - end - define e - nexti - disassemble $pc $pc+10 - end - - -Other hard to classify stuff ----------------------------- -signal n: - sends the victim program a signal. - -e.g. `signal 3` will send a SIGQUIT. - -info signals: - what gdb does when the victim receives certain signals. - -list: - -e.g.: - -list - lists current function source -list 1,10 - list first 10 lines of current file. - -list test.c:1,10 - - -directory: - Adds directories to be searched for source if gdb cannot find the source. - (note it is a bit sensitive about slashes) - -e.g. To add the root of the filesystem to the searchpath do:: - - directory // - - -call -This calls a function in the victim program, this is pretty powerful -e.g. -(gdb) call printf("hello world") -outputs: -$1 = 11 - -You might now be thinking that the line above didn't work, something extra had -to be done. -(gdb) call fflush(stdout) -hello world$2 = 0 -As an aside the debugger also calls malloc & free under the hood -to make space for the "hello world" string. - - - -hints ------ -1) command completion works just like bash - ( if you are a bad typist like me this really helps ) - -e.g. hit br & cursor up & down :-). - -2) if you have a debugging problem that takes a few steps to recreate -put the steps into a file called .gdbinit in your current working directory -if you have defined a few extra useful user defined commands put these in -your home directory & they will be read each time gdb is launched. - -A typical .gdbinit file might be.:: - - break main - run - break runtime_exception - cont - - -stack chaining in gdb by hand ------------------------------ -This is done using a the same trick described for VM:: - - p/x (*($sp+56))&0x7fffffff - -get the first backchain. - -For z/Architecture -Replace 56 with 112 & ignore the &0x7fffffff -in the macros below & do nasty casts to longs like the following -as gdb unfortunately deals with printed arguments as ints which -messes up everything. - -i.e. here is a 3rd backchain dereference:: - - p/x *(long *)(***(long ***)$sp+112) - - -this outputs:: - - $5 = 0x528f18 - -on my machine. - -Now you can use:: - - info symbol (*($sp+56))&0x7fffffff - -you might see something like:: - - rl_getc + 36 in section .text - -telling you what is located at address 0x528f18 -Now do:: - - p/x (*(*$sp+56))&0x7fffffff - -This outputs:: - - $6 = 0x528ed0 - -Now do:: - - info symbol (*(*$sp+56))&0x7fffffff - rl_read_key + 180 in section .text - -now do:: - - p/x (*(**$sp+56))&0x7fffffff - -& so on. - -Disassembling instructions without debug info ---------------------------------------------- -gdb typically complains if there is a lack of debugging -symbols in the disassemble command with -"No function contains specified address." To get around -this do:: - - x/xi
- -e.g.:: - - x/20xi 0x400730 - - - -Note: - Remember gdb has history just like bash you don't need to retype the - whole line just use the up & down arrows. - - - -For more info -------------- -From your linuxbox do:: - - man gdb - -or:: - - info gdb. - -core dumps ----------- - -What a core dump ? -^^^^^^^^^^^^^^^^^^ - -A core dump is a file generated by the kernel (if allowed) which contains the -registers and all active pages of the program which has crashed. - -From this file gdb will allow you to look at the registers, stack trace and -memory of the program as if it just crashed on your system. It is usually -called core and created in the current working directory. - -This is very useful in that a customer can mail a core dump to a technical -support department and the technical support department can reconstruct what -happened. Provided they have an identical copy of this program with debugging -symbols compiled in and the source base of this build is available. - -In short it is far more useful than something like a crash log could ever hope -to be. - -Why have I never seen one ? -^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Probably because you haven't used the command:: - - ulimit -c unlimited in bash - -to allow core dumps, now do:: - - ulimit -a - -to verify that the limit was accepted. - -A sample core dump - To create this I'm going to do:: - - ulimit -c unlimited - gdb - -to launch gdb (my victim app. ) now be bad & do the following from another -telnet/xterm session to the same machine:: - - ps -aux | grep gdb - kill -SIGSEGV - -or alternatively use `killall -SIGSEGV gdb` if you have the killall command. - -Now look at the core dump:: - - ./gdb core - -Displays the following:: - - GNU gdb 4.18 - Copyright 1998 Free Software Foundation, Inc. - GDB is free software, covered by the GNU General Public License, and you are - welcome to change it and/or distribute copies of it under certain conditions. - Type "show copying" to see the conditions. - There is absolutely no warranty for GDB. Type "show warranty" for details. - This GDB was configured as "s390-ibm-linux"... - Core was generated by `./gdb'. - Program terminated with signal 11, Segmentation fault. - Reading symbols from /usr/lib/libncurses.so.4...done. - Reading symbols from /lib/libm.so.6...done. - Reading symbols from /lib/libc.so.6...done. - Reading symbols from /lib/ld-linux.so.2...done. - #0 0x40126d1a in read () from /lib/libc.so.6 - Setting up the environment for debugging gdb. - Breakpoint 1 at 0x4dc6f8: file utils.c, line 471. - Breakpoint 2 at 0x4d87a4: file top.c, line 2609. - (top-gdb) info stack - #0 0x40126d1a in read () from /lib/libc.so.6 - #1 0x528f26 in rl_getc (stream=0x7ffffde8) at input.c:402 - #2 0x528ed0 in rl_read_key () at input.c:381 - #3 0x5167e6 in readline_internal_char () at readline.c:454 - #4 0x5168ee in readline_internal_charloop () at readline.c:507 - #5 0x51692c in readline_internal () at readline.c:521 - #6 0x5164fe in readline (prompt=0x7ffff810) - at readline.c:349 - #7 0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1, - annotation_suffix=0x4d6b44 "prompt") at top.c:2091 - #8 0x4d6cf0 in command_loop () at top.c:1345 - #9 0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635 - - -LDD -=== -This is a program which lists the shared libraries which a library needs, -Note you also get the relocations of the shared library text segments which -help when using objdump --source. - -e.g.:: - - ldd ./gdb - -outputs:: - - libncurses.so.4 => /usr/lib/libncurses.so.4 (0x40018000) - libm.so.6 => /lib/libm.so.6 (0x4005e000) - libc.so.6 => /lib/libc.so.6 (0x40084000) - /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000) - - -Debugging shared libraries -========================== -Most programs use shared libraries, however it can be very painful -when you single step instruction into a function like printf for the -first time & you end up in functions like _dl_runtime_resolve this is -the ld.so doing lazy binding, lazy binding is a concept in ELF where -shared library functions are not loaded into memory unless they are -actually used, great for saving memory but a pain to debug. - -To get around this either relink the program -static or exit gdb type -export LD_BIND_NOW=true this will stop lazy binding & restart the gdb'ing -the program in question. - - - -Debugging modules -================= -As modules are dynamically loaded into the kernel their address can be -anywhere to get around this use the -m option with insmod to emit a load -map which can be piped into a file if required. - -The proc file system -==================== -What is it ?. -It is a filesystem created by the kernel with files which are created on demand -by the kernel if read, or can be used to modify kernel parameters, -it is a powerful concept. - -e.g.:: - - cat /proc/sys/net/ipv4/ip_forward - -On my machine outputs:: - - 0 - -telling me ip_forwarding is not on to switch it on I can do:: - - echo 1 > /proc/sys/net/ipv4/ip_forward - -cat it again:: - - cat /proc/sys/net/ipv4/ip_forward - -On my machine now outputs:: - - 1 - -IP forwarding is on. - -There is a lot of useful info in here best found by going in and having a look -around, so I'll take you through some entries I consider important. - -All the processes running on the machine have their own entry defined by -/proc/ - -So lets have a look at the init process:: - - cd /proc/1 - cat cmdline - -emits:: - - init [2] - -:: - - cd /proc/1/fd - -This contains numerical entries of all the open files, -some of these you can cat e.g. stdout (2):: - - cat /proc/29/maps - -on my machine emits:: - - 00400000-00478000 r-xp 00000000 5f:00 4103 /bin/bash - 00478000-0047e000 rw-p 00077000 5f:00 4103 /bin/bash - 0047e000-00492000 rwxp 00000000 00:00 0 - 40000000-40015000 r-xp 00000000 5f:00 14382 /lib/ld-2.1.2.so - 40015000-40016000 rw-p 00014000 5f:00 14382 /lib/ld-2.1.2.so - 40016000-40017000 rwxp 00000000 00:00 0 - 40017000-40018000 rw-p 00000000 00:00 0 - 40018000-4001b000 r-xp 00000000 5f:00 14435 /lib/libtermcap.so.2.0.8 - 4001b000-4001c000 rw-p 00002000 5f:00 14435 /lib/libtermcap.so.2.0.8 - 4001c000-4010d000 r-xp 00000000 5f:00 14387 /lib/libc-2.1.2.so - 4010d000-40111000 rw-p 000f0000 5f:00 14387 /lib/libc-2.1.2.so - 40111000-40114000 rw-p 00000000 00:00 0 - 40114000-4011e000 r-xp 00000000 5f:00 14408 /lib/libnss_files-2.1.2.so - 4011e000-4011f000 rw-p 00009000 5f:00 14408 /lib/libnss_files-2.1.2.so - 7fffd000-80000000 rwxp ffffe000 00:00 0 - - -Showing us the shared libraries init uses where they are in memory -& memory access permissions for each virtual memory area. - -/proc/1/cwd is a softlink to the current working directory. - -/proc/1/root is the root of the filesystem for this process. - -/proc/1/mem is the current running processes memory which you -can read & write to like a file. - -strace uses this sometimes as it is a bit faster than the -rather inefficient ptrace interface for peeking at DATA. - -:: - - cat status - - Name: init - State: S (sleeping) - Pid: 1 - PPid: 0 - Uid: 0 0 0 0 - Gid: 0 0 0 0 - Groups: - VmSize: 408 kB - VmLck: 0 kB - VmRSS: 208 kB - VmData: 24 kB - VmStk: 8 kB - VmExe: 368 kB - VmLib: 0 kB - SigPnd: 0000000000000000 - SigBlk: 0000000000000000 - SigIgn: 7fffffffd7f0d8fc - SigCgt: 00000000280b2603 - CapInh: 00000000fffffeff - CapPrm: 00000000ffffffff - CapEff: 00000000fffffeff - - User PSW: 070de000 80414146 - task: 004b6000 tss: 004b62d8 ksp: 004b7ca8 pt_regs: 004b7f68 - User GPRS: - 00000400 00000000 0000000b 7ffffa90 - 00000000 00000000 00000000 0045d9f4 - 0045cafc 7ffffa90 7fffff18 0045cb08 - 00010400 804039e8 80403af8 7ffff8b0 - User ACRS: - 00000000 00000000 00000000 00000000 - 00000001 00000000 00000000 00000000 - 00000000 00000000 00000000 00000000 - 00000000 00000000 00000000 00000000 - Kernel BackChain CallChain BackChain CallChain - 004b7ca8 8002bd0c 004b7d18 8002b92c - 004b7db8 8005cd50 004b7e38 8005d12a - 004b7f08 80019114 - -Showing among other things memory usage & status of some signals & -the processes'es registers from the kernel task_structure -as well as a backchain which may be useful if a process crashes -in the kernel for some unknown reason. - -Some driver debugging techniques -================================ -debug feature -------------- -Some of our drivers now support a "debug feature" in -/proc/s390dbf see s390dbf.txt in the linux/Documentation directory -for more info. - -e.g. -to switch on the lcs "debug feature":: - - echo 5 > /proc/s390dbf/lcs/level - -& then after the error occurred:: - - cat /proc/s390dbf/lcs/sprintf >/logfile - -the logfile now contains some information which may help -tech support resolve a problem in the field. - - - -high level debugging network drivers ------------------------------------- -ifconfig is a quite useful command -it gives the current state of network drivers. - -If you suspect your network device driver is dead -one way to check is type:: - - ifconfig - -e.g. tr0 - -You should see something like:: - - ifconfig tr0 - tr0 Link encap:16/4 Mbps Token Ring (New) HWaddr 00:04:AC:20:8E:48 - inet addr:9.164.185.132 Bcast:9.164.191.255 Mask:255.255.224.0 - UP BROADCAST RUNNING MULTICAST MTU:2000 Metric:1 - RX packets:246134 errors:0 dropped:0 overruns:0 frame:0 - TX packets:5 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:100 - -if the device doesn't say up -try:: - - /etc/rc.d/init.d/network start - -( this starts the network stack & hopefully calls ifconfig tr0 up ). -ifconfig looks at the output of /proc/net/dev and presents it in a more -presentable form. - -Now ping the device from a machine in the same subnet. - -if the RX packets count & TX packets counts don't increment you probably -have problems. - -next:: - - cat /proc/net/arp - -Do you see any hardware addresses in the cache if not you may have problems. -Next try:: - - ping -c 5 - -i.e. the Bcast field above in the output of -ifconfig. Do you see any replies from machines other than the local machine -if not you may have problems. also if the TX packets count in ifconfig -hasn't incremented either you have serious problems in your driver -(e.g. the txbusy field of the network device being stuck on ) -or you may have multiple network devices connected. - - -chandev -------- -There is a new device layer for channel devices, some -drivers e.g. lcs are registered with this layer. - -If the device uses the channel device layer you'll be -able to find what interrupts it uses & the current state -of the device. - -See the manpage chandev.8 &type cat /proc/chandev for more info. - - -SysRq -===== -This is now supported by linux for s/390 & z/Architecture. - -To enable it do compile the kernel with:: - - Kernel Hacking -> Magic SysRq Key Enabled - -Then:: - - echo "1" > /proc/sys/kernel/sysrq - -also type:: - - echo "8" >/proc/sys/kernel/printk - -To make printk output go to console. - -On 390 all commands are prefixed with:: - - ^- - -e.g.:: - - ^-t will show tasks. - ^-? or some unknown command will display help. - -The sysrq key reading is very picky ( I have to type the keys in an -xterm session & paste them into the x3270 console ) -& it may be wise to predefine the keys as described in the VM hints above - -This is particularly useful for syncing disks unmounting & rebooting -if the machine gets partially hung. - -Read Documentation/admin-guide/sysrq.rst for more info - -References: -=========== -- Enterprise Systems Architecture Reference Summary -- Enterprise Systems Architecture Principles of Operation -- Hartmut Penners s390 stack frame sheet. -- IBM Mainframe Channel Attachment a technology brief from a CISCO webpage -- Various bits of man & info pages of Linux. -- Linux & GDB source. -- Various info & man pages. -- CMS Help on tracing commands. -- Linux for s/390 Elf Application Binary Interface -- Linux for z/Series Elf Application Binary Interface ( Both Highly Recommended ) -- z/Architecture Principles of Operation SA22-7832-00 -- Enterprise Systems Architecture/390 Reference Summary SA22-7209-01 & the -- Enterprise Systems Architecture/390 Principles of Operation SA22-7201-05 - -Special Thanks -============== -Special thanks to Neale Ferguson who maintains a much -prettier HTML version of this page at -http://linuxvm.org/penguinvm/ -Bob Grainger Stefan Bader & others for reporting bugs diff --git a/Documentation/s390/index.rst b/Documentation/s390/index.rst index f8c01cb7fa37..f7af2061e406 100644 --- a/Documentation/s390/index.rst +++ b/Documentation/s390/index.rst @@ -7,7 +7,6 @@ s390 Architecture cds 3270 - debugging390 driver-model monreader qeth