diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index fc0555596d6d..0ee34acb8d7b 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -40,6 +40,8 @@ #include #include +#include + static DEFINE_SPINLOCK(ixp2000_slowport_lock); static unsigned long ixp2000_slowport_irq_flags; @@ -179,7 +181,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* clear timer 1 */ ixp2000_reg_write(IXP2000_T1_CLR, 1); - + while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); next_jiffy_time -= ticks_per_jiffy; @@ -238,35 +240,40 @@ void __init ixp2000_init_time(unsigned long tick_rate) /************************************************************************* * GPIO helpers *************************************************************************/ -static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_falling_edge; +static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_level_low; static unsigned long GPIO_IRQ_level_high; -void gpio_line_config(int line, int style) +static void update_gpio_int_csrs(void) +{ + ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); + ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); + ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); + ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); +} + +void gpio_line_config(int line, int direction) { unsigned long flags; local_irq_save(flags); + if (direction == GPIO_OUT) { + irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0; - if(style == GPIO_OUT) { /* if it's an output, it ain't an interrupt anymore */ - ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line)); GPIO_IRQ_falling_edge &= ~(1 << line); GPIO_IRQ_rising_edge &= ~(1 << line); GPIO_IRQ_level_low &= ~(1 << line); GPIO_IRQ_level_high &= ~(1 << line); - ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); - ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); - ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); - ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0; - } else if(style == GPIO_IN) { - ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line)); + update_gpio_int_csrs(); + + ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line); + } else if (direction == GPIO_IN) { + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); } - local_irq_restore(flags); -} +} /************************************************************************* @@ -285,9 +292,50 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, str } } +static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) +{ + int line = irq - IRQ_IXP2000_GPIO0; + + /* + * First, configure this GPIO line as an input. + */ + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); + + /* + * Then, set the proper trigger type. + */ + if (type & IRQT_FALLING) + GPIO_IRQ_falling_edge |= 1 << line; + else + GPIO_IRQ_falling_edge &= ~(1 << line); + if (type & IRQT_RISING) + GPIO_IRQ_rising_edge |= 1 << line; + else + GPIO_IRQ_rising_edge &= ~(1 << line); + if (type & IRQT_LOW) + GPIO_IRQ_level_low |= 1 << line; + else + GPIO_IRQ_level_low &= ~(1 << line); + if (type & IRQT_HIGH) + GPIO_IRQ_level_high |= 1 << line; + else + GPIO_IRQ_level_high &= ~(1 << line); + update_gpio_int_csrs(); + + /* + * Finally, mark the corresponding IRQ as valid. + */ + irq_desc[irq].valid = 1; + + return 0; +} + static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) { ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + + ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); } @@ -302,6 +350,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) } static struct irqchip ixp2000_GPIO_irq_chip = { + .type = ixp2000_GPIO_irq_type, .ack = ixp2000_GPIO_irq_mask_ack, .mask = ixp2000_GPIO_irq_mask, .unmask = ixp2000_GPIO_irq_unmask @@ -338,7 +387,7 @@ static void ixp2000_irq_mask(unsigned int irq) static void ixp2000_irq_unmask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); + ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); } static struct irqchip ixp2000_irq_chip = { @@ -375,16 +424,16 @@ void __init ixp2000_init_irq(void) * our mask/unmask code much simpler. */ for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { - if((1 << irq) & IXP2000_VALID_IRQ_MASK) { + if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { set_irq_chip(irq, &ixp2000_irq_chip); set_irq_handler(irq, do_level_IRQ); set_irq_flags(irq, IRQF_VALID); } else set_irq_flags(irq, 0); } - + /* * GPIO IRQs are invalid until someone sets the interrupt mode - * by calling gpio_line_set(); + * by calling set_irq_type(). */ for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { set_irq_chip(irq, &ixp2000_GPIO_irq_chip); diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 267ba02d77dc..f39e8408488f 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -141,7 +141,15 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .physical = IXP4XX_PCI_CFG_BASE_PHYS, .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE + }, +#ifdef CONFIG_DEBUG_LL + { /* Debug UART mapping */ + .virtual = IXP4XX_DEBUG_UART_BASE_VIRT, + .physical = IXP4XX_DEBUG_UART_BASE_PHYS, + .length = IXP4XX_DEBUG_UART_REGION_SIZE, + .type = MT_DEVICE } +#endif }; void __init ixp4xx_map_io(void) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 0aa73d414783..e3d8510f4340 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -132,8 +132,8 @@ ENTRY(cpu_v6_switch_mm) * 100x 1 0 1 r/o no acc * 10x0 1 0 1 r/o no acc * 1011 0 0 1 r/w no acc - * 110x 1 1 0 r/o r/o - * 11x0 1 1 0 r/o r/o + * 110x 0 1 0 r/w r/o + * 11x0 0 1 0 r/w r/o * 1111 0 1 1 r/w r/w */ ENTRY(cpu_v6_set_pte) @@ -150,7 +150,7 @@ ENTRY(cpu_v6_set_pte) tst r1, #L_PTE_USER orrne r2, r2, #AP1 | nG tstne r2, #APX - eorne r2, r2, #AP0 + bicne r2, r2, #APX | AP0 tst r1, #L_PTE_YOUNG biceq r2, r2, #APX | AP1 | AP0 diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index ec943cad2314..1956af382cd8 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -33,7 +33,8 @@ #include #include -#include /* Pick up IXP42000-specific bits */ +#include /* Pick up IXP2000-specific bits */ +#include static inline int ixp2000_scl_pin(void *data) { diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h index 84634af5cc64..03cbbe1fd9d8 100644 --- a/include/asm-arm/arch-ixp2000/gpio.h +++ b/include/asm-arm/arch-ixp2000/gpio.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-ixp2000/ixp2000-gpio.h + * include/asm-arm/arch-ixp2000/gpio.h * * Copyright (C) 2002 Intel Corporation. * @@ -16,26 +16,18 @@ * Use this instead of directly setting the GPIO registers. * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) */ -#ifndef _ASM_ARCH_IXP2000_GPIO_H_ -#define _ASM_ARCH_IXP2000_GPIO_H_ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H #ifndef __ASSEMBLY__ -#define GPIO_OUT 0x0 -#define GPIO_IN 0x80 + +#define GPIO_IN 0 +#define GPIO_OUT 1 #define IXP2000_GPIO_LOW 0 #define IXP2000_GPIO_HIGH 1 -#define GPIO_NO_EDGES 0 -#define GPIO_FALLING_EDGE 1 -#define GPIO_RISING_EDGE 2 -#define GPIO_BOTH_EDGES 3 -#define GPIO_LEVEL_LOW 4 -#define GPIO_LEVEL_HIGH 8 - -extern void set_GPIO_IRQ_edge(int gpio_nr, int edge); -extern void set_GPIO_IRQ_level(int gpio_nr, int level); -extern void gpio_line_config(int line, int style); +extern void gpio_line_config(int line, int direction); static inline int gpio_line_get(int line) { @@ -45,11 +37,12 @@ static inline int gpio_line_get(int line) static inline void gpio_line_set(int line, int value) { if (value == IXP2000_GPIO_HIGH) { - ixp_reg_write(IXP2000_GPIO_POSR, BIT(line)); - } else if (value == IXP2000_GPIO_LOW) - ixp_reg_write(IXP2000_GPIO_POCR, BIT(line)); + ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line); + } else if (value == IXP2000_GPIO_LOW) { + ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line); + } } #endif /* !__ASSEMBLY__ */ -#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ +#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h index 083462668e18..5e56b47446e0 100644 --- a/include/asm-arm/arch-ixp2000/io.h +++ b/include/asm-arm/arch-ixp2000/io.h @@ -27,8 +27,8 @@ * since that isn't available on the A? revisions we just keep doing * things manually. */ -#define alignb(addr) (void __iomem *)((unsigned long)addr ^ 3) -#define alignw(addr) (void __iomem *)((unsigned long)addr ^ 2) +#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3) +#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2) #define outb(v,p) __raw_writeb((v),alignb(___io(p))) #define outw(v,p) __raw_writew((v),alignw(___io(p))) @@ -48,6 +48,78 @@ #define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l) #define insl(p,d,l) __raw_readsl(___io(p),d,l) +#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE) + +#define ioread8(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readb(alignb(p)); \ + } else { \ + __v = __raw_readb(p); \ + } \ + \ + __v; \ + }) \ + +#define ioread16(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readw(alignw(p)); \ + } else { \ + __v = le16_to_cpu(__raw_readw(p)); \ + } \ + \ + __v; \ + }) + +#define ioread32(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readl(p); \ + } else { \ + __v = le32_to_cpu(__raw_readl(p)); \ + } \ + \ + __v; \ + }) + +#define iowrite8(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writeb((v), alignb(p)); \ + } else { \ + __raw_writeb((v), p); \ + } \ + }) + +#define iowrite16(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writew((v), alignw(p)); \ + } else { \ + __raw_writew(cpu_to_le16(v), p); \ + } \ + }) + +#define iowrite32(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writel((v), p); \ + } else { \ + __raw_writel(cpu_to_le32(v), p); \ + } \ + }) + +#define ioport_map(port, nr) ___io(port) + +#define ioport_unmap(addr) + #ifdef CONFIG_ARCH_IXDP2X01 /* diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h index 901bba6d02b4..52ded516ea5c 100644 --- a/include/asm-arm/arch-ixp2000/platform.h +++ b/include/asm-arm/arch-ixp2000/platform.h @@ -138,30 +138,10 @@ struct ixp2000_flash_data { unsigned long (*bank_setup)(unsigned long); }; -/* - * GPIO helper functions - */ -#define GPIO_IN 0 -#define GPIO_OUT 1 - -extern void gpio_line_config(int line, int style); - -static inline int gpio_line_get(int line) -{ - return (((*IXP2000_GPIO_PLR) >> line) & 1); -} - -static inline void gpio_line_set(int line, int value) -{ - if (value) - ixp2000_reg_write(IXP2000_GPIO_POSR, (1 << line)); - else - ixp2000_reg_write(IXP2000_GPIO_POCR, (1 << line)); -} - struct ixp2000_i2c_pins { unsigned long sda_pin; unsigned long scl_pin; }; + #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S index 4499ae8e4b44..45a6c6cc29d5 100644 --- a/include/asm-arm/arch-ixp4xx/debug-macro.S +++ b/include/asm-arm/arch-ixp4xx/debug-macro.S @@ -14,6 +14,7 @@ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0xc8000000 + orrne \rx, \rx, #0x00b00000 movne \rx, #0xff000000 add \rx,\rx,#3 @ Uart regs are at off set of 3 if @ byte writes used - Big Endian. diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h index 8eeb1db6309d..004696a95bdb 100644 --- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h +++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h @@ -69,6 +69,16 @@ #define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBF2000) #define IXP4XX_PERIPHERAL_REGION_SIZE (0x0000C000) +/* + * Debug UART + * + * This is basically a remap of UART1 into a region that is section + * aligned so that it * can be used with the low-level debug code. + */ +#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) +#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000) +#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) + #define IXP4XX_EXP_CS0_OFFSET 0x00 #define IXP4XX_EXP_CS1_OFFSET 0x04 #define IXP4XX_EXP_CS2_OFFSET 0x08 diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 08a46302d265..cc4b5f5dbfcf 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -275,6 +275,7 @@ extern void __iounmap(void __iomem *addr); /* * io{read,write}{8,16,32} macros */ +#ifndef ioread8 #define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; }) #define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; }) #define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; }) @@ -293,6 +294,7 @@ extern void __iounmap(void __iomem *addr); extern void __iomem *ioport_map(unsigned long port, unsigned int nr); extern void ioport_unmap(void __iomem *addr); +#endif struct pci_dev;