redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

gpio: mmio: Support two direction registers 

It turns out that one specific hardware has two direction
registers: one to set a GPIO line as input and another one
to set a GPIO line as output. So in theory a line can be
configured as input and output at the same time.

Make the MMIO GPIO helper deal with this: store both
registers in the state container, use both in the generic
code if present. Synchronize the input register to the
output register when we register a GPIO chip, with the
output settings taking precedence.

Keep the helper variable to detect inverted direction
semantics (only direction in register) but augment the
code to be more straight-forward for the generic case
when setting the registers.

Fix some flunky with unreadable direction registers at
the same time as we're touching this code.

Cc: David Woods <dwoods@mellanox.com>
Cc: Shravan Kumar Ramani <sramani@mellanox.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
hifive-unleashed-5.2
Linus Walleij 2019-02-22 11:14:44 +01:00
parent 9e98c678c2
commit f69e00bd21
2 changed files with 67 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

85
drivers/gpio/gpio-mmio.c
View File

@ -372,11 +372,12 @@ static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
spin_lock_irqsave(&gc->bgpio_lock, flags);
if (gc->bgpio_dir_inverted)
gc->bgpio_dir |= bgpio_line2mask(gc, gpio);
else
gc->bgpio_dir &= ~bgpio_line2mask(gc, gpio);
gc->write_reg(gc->reg_dir, gc->bgpio_dir);
gc->bgpio_dir &= ~bgpio_line2mask(gc, gpio);
if (gc->reg_dir_in)
gc->write_reg(gc->reg_dir_in, ~gc->bgpio_dir);
if (gc->reg_dir_out)
gc->write_reg(gc->reg_dir_out, gc->bgpio_dir);
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
@ -385,11 +386,16 @@ static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
static int bgpio_get_dir(struct gpio_chip *gc, unsigned int gpio)
{
/* Return 0 if output, 1 of input */
if (gc->bgpio_dir_inverted)
return !!(gc->read_reg(gc->reg_dir) & bgpio_line2mask(gc, gpio));
else
return !(gc->read_reg(gc->reg_dir) & bgpio_line2mask(gc, gpio));
/* Return 0 if output, 1 if input */
if (gc->bgpio_dir_unreadable)
return !(gc->bgpio_dir & bgpio_line2mask(gc, gpio));
if (gc->reg_dir_out)
return !(gc->read_reg(gc->reg_dir_out) & bgpio_line2mask(gc, gpio));
if (gc->reg_dir_in)
return !!(gc->read_reg(gc->reg_dir_in) & bgpio_line2mask(gc, gpio));
/* This should not happen */
return 1;
}
static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
@ -400,11 +406,12 @@ static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
spin_lock_irqsave(&gc->bgpio_lock, flags);
if (gc->bgpio_dir_inverted)
gc->bgpio_dir &= ~bgpio_line2mask(gc, gpio);
else
gc->bgpio_dir |= bgpio_line2mask(gc, gpio);
gc->write_reg(gc->reg_dir, gc->bgpio_dir);
gc->bgpio_dir |= bgpio_line2mask(gc, gpio);
if (gc->reg_dir_in)
gc->write_reg(gc->reg_dir_in, ~gc->bgpio_dir);
if (gc->reg_dir_out)
gc->write_reg(gc->reg_dir_out, gc->bgpio_dir);
spin_unlock_irqrestore(&gc->bgpio_lock, flags);
@ -537,19 +544,19 @@ static int bgpio_setup_direction(struct gpio_chip *gc,
void __iomem *dirin,
unsigned long flags)
{
if (dirout && dirin) {
return -EINVAL;
} else if (dirout) {
gc->reg_dir = dirout;
if (dirout || dirin) {
gc->reg_dir_out = dirout;
gc->reg_dir_in = dirin;
gc->direction_output = bgpio_dir_out;
gc->direction_input = bgpio_dir_in;
gc->get_direction = bgpio_get_dir;
} else if (dirin) {
gc->reg_dir = dirin;
gc->direction_output = bgpio_dir_out;
gc->direction_input = bgpio_dir_in;
gc->get_direction = bgpio_get_dir;
gc->bgpio_dir_inverted = true;
/*
* If only dirin is available, this means we need
* inverted semantics when handling get/set registers
* so detect this here.
*/
if (dirin && !dirout)
gc->bgpio_dir_inverted = true;
} else {
if (flags & BGPIOF_NO_OUTPUT)
gc->direction_output = bgpio_dir_out_err;
@ -588,11 +595,11 @@ static int bgpio_request(struct gpio_chip *chip, unsigned gpio_pin)
* @dirout: MMIO address for the register to set the line as OUTPUT. It is assumed
* that setting a line to 1 in this register will turn that line into an
* output line. Conversely, setting the line to 0 will turn that line into
* an input. Either this or @dirin can be defined, but never both.
* an input.
* @dirin: MMIO address for the register to set this line as INPUT. It is assumed
* that setting a line to 1 in this register will turn that line into an
* input line. Conversely, setting the line to 0 will turn that line into
* an output. Either this or @dirout can be defined, but never both.
* an output.
* @flags: Different flags that will affect the behaviour of the device, such as
* endianness etc.
*/
@ -634,8 +641,28 @@ int bgpio_init(struct gpio_chip *gc, struct device *dev,
if (gc->set == bgpio_set_set &&
!(flags & BGPIOF_UNREADABLE_REG_SET))
gc->bgpio_data = gc->read_reg(gc->reg_set);
if (gc->reg_dir && !(flags & BGPIOF_UNREADABLE_REG_DIR))
gc->bgpio_dir = gc->read_reg(gc->reg_dir);
if (flags & BGPIOF_UNREADABLE_REG_DIR)
gc->bgpio_dir_unreadable = true;
/*
* Inspect hardware to find initial direction setting.
*/
if ((gc->reg_dir_out || gc->reg_dir_in) &&
!(flags & BGPIOF_UNREADABLE_REG_DIR)) {
if (gc->reg_dir_out)
gc->bgpio_dir = gc->read_reg(gc->reg_dir_out);
else if (gc->reg_dir_in)
gc->bgpio_dir = ~gc->read_reg(gc->reg_dir_in);
/*
* If we have two direction registers, synchronise
* input setting to output setting, the library
* can not handle a line being input and output at
* the same time.
*/
if (gc->reg_dir_out && gc->reg_dir_in)
gc->write_reg(gc->reg_dir_in, ~gc->bgpio_dir);
}
return ret;
}

15
include/linux/gpio/driver.h
View File

@ -227,9 +227,13 @@ struct gpio_irq_chip {
* @reg_dat: data (in) register for generic GPIO
* @reg_set: output set register (out=high) for generic GPIO
* @reg_clr: output clear register (out=low) for generic GPIO
* @reg_dir: direction setting register for generic GPIO
* @reg_dir_out: direction out setting register for generic GPIO
* @reg_dir_in: direction in setting register for generic GPIO
* @bgpio_dir_inverted: indicates that the direction register is inverted
* (gpiolib private state variable)
* (gpiolib private state variable) this means @reg_dir_in is
* available but not @reg_dir_out.
* @bgpio_dir_unreadable: indicates that the direction register(s) cannot
* be read and we need to rely on out internal state tracking.
* @bgpio_bits: number of register bits used for a generic GPIO i.e.
* <register width> * 8
* @bgpio_lock: used to lock chip->bgpio_data. Also, this is needed to keep
@ -237,7 +241,8 @@ struct gpio_irq_chip {
* @bgpio_data: shadowed data register for generic GPIO to clear/set bits
* safely.
* @bgpio_dir: shadowed direction register for generic GPIO to clear/set
* direction safely.
* direction safely. A "1" in this word means the line is set as
* output.
*
* A gpio_chip can help platforms abstract various sources of GPIOs so
* they can all be accessed through a common programing interface.
@ -298,8 +303,10 @@ struct gpio_chip {
void __iomem *reg_dat;
void __iomem *reg_set;
void __iomem *reg_clr;
void __iomem *reg_dir;
void __iomem *reg_dir_out;
void __iomem *reg_dir_in;
bool bgpio_dir_inverted;
bool bgpio_dir_unreadable;
int bgpio_bits;
spinlock_t bgpio_lock;
unsigned long bgpio_data;