From 351772658a4d1acc0221a6e30676bb0594e74812 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Sat, 24 Feb 2007 21:26:42 -0500
Subject: [PATCH 01/86] [libata] sata_mv: remove extra braces

Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_mv.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a65ba636aaa8..5f3d524c3387 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -798,20 +798,18 @@ static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
 {
 	unsigned int ofs = mv_scr_offset(sc_reg_in);
 
-	if (0xffffffffU != ofs) {
+	if (0xffffffffU != ofs)
 		return readl(mv_ap_base(ap) + ofs);
-	} else {
+	else
 		return (u32) ofs;
-	}
 }
 
 static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
 {
 	unsigned int ofs = mv_scr_offset(sc_reg_in);
 
-	if (0xffffffffU != ofs) {
+	if (0xffffffffU != ofs)
 		writelfl(val, mv_ap_base(ap) + ofs);
-	}
 }
 
 static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
@@ -1320,17 +1318,15 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
 	int shift, port, port0, hard_port, handled;
 	unsigned int err_mask;
 
-	if (hc == 0) {
+	if (hc == 0)
 		port0 = 0;
-	} else {
+	else
 		port0 = MV_PORTS_PER_HC;
-	}
 
 	/* we'll need the HC success int register in most cases */
 	hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-	if (hc_irq_cause) {
+	if (hc_irq_cause)
 		writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
-	}
 
 	VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
 		hc,relevant,hc_irq_cause);
@@ -1425,9 +1421,8 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 	/* check the cases where we either have nothing pending or have read
 	 * a bogus register value which can indicate HW removal or PCI fault
 	 */
-	if (!irq_stat || (0xffffffffU == irq_stat)) {
+	if (!irq_stat || (0xffffffffU == irq_stat))
 		return IRQ_NONE;
-	}
 
 	n_hcs = mv_get_hc_count(host->ports[0]->flags);
 	spin_lock(&host->lock);

From 43727fbc753c63f9d2764c56467303698cc52c14 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Sun, 25 Feb 2007 16:50:52 -0500
Subject: [PATCH 02/86] [libata] export sata_print_link_status()

To be used in sata_mv's exception handling code, and overall is a
generally useful function.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 3 ++-
 include/linux/libata.h    | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0abd72d0dec2..e7ad13d43c9f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1958,7 +1958,7 @@ void ata_port_probe(struct ata_port *ap)
  *	LOCKING:
  *	None.
  */
-static void sata_print_link_status(struct ata_port *ap)
+void sata_print_link_status(struct ata_port *ap)
 {
 	u32 sstatus, scontrol, tmp;
 
@@ -6360,6 +6360,7 @@ EXPORT_SYMBOL_GPL(ata_tf_load);
 EXPORT_SYMBOL_GPL(ata_tf_read);
 EXPORT_SYMBOL_GPL(ata_noop_dev_select);
 EXPORT_SYMBOL_GPL(ata_std_dev_select);
+EXPORT_SYMBOL_GPL(sata_print_link_status);
 EXPORT_SYMBOL_GPL(ata_tf_to_fis);
 EXPORT_SYMBOL_GPL(ata_tf_from_fis);
 EXPORT_SYMBOL_GPL(ata_check_status);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 0cfbcb6f08eb..a41749820964 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -701,6 +701,7 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
 	return ap->ops == &ata_dummy_port_ops;
 }
 
+extern void sata_print_link_status(struct ata_port *ap);
 extern void ata_port_probe(struct ata_port *);
 extern void __sata_phy_reset(struct ata_port *ap);
 extern void sata_phy_reset(struct ata_port *ap);

From d88184fb2348a50f7c34f5d49a901c875b2e0114 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Mon, 26 Feb 2007 01:26:06 -0500
Subject: [PATCH 03/86] [libata] sata_mv: clean up DMA boundary issues, turn on
 64-bit DMA

The chips covered by sata_mv have a 32-bit DMA boundary they must not
cross, not a 64K boundary.  We are merely limited to a 64K maximum
segment size.  Therefore, the DMA scatter/gather table fill code can be
greatly simplified, and we need not cut in half the S/G table size as
reported to the SCSI layer.

Also, the driver forget to turn on 64-bit DMA at the PCI layer.  All
other data structures (both hardware and software) have been prepped for
64-bit PCI DMA.  It was simply never turned on.  <fingers crossed> let's
see if it still works...

Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_mv.c | 84 ++++++++++++++++++++++++++++---------------
 1 file changed, 55 insertions(+), 29 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 5f3d524c3387..7b73c73b3f34 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -253,10 +253,7 @@ enum {
 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
 
 enum {
-	/* Our DMA boundary is determined by an ePRD being unable to handle
-	 * anything larger than 64KB
-	 */
-	MV_DMA_BOUNDARY		= 0xffffU,
+	MV_DMA_BOUNDARY		= 0xffffffffU,
 
 	EDMA_REQ_Q_BASE_LO_MASK	= 0xfffffc00U,
 
@@ -384,10 +381,10 @@ static struct scsi_host_template mv_sht = {
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= MV_USE_Q_DEPTH,
 	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= MV_MAX_SG_CT / 2,
+	.sg_tablesize		= MV_MAX_SG_CT,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.use_clustering		= 1,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= MV_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
@@ -585,6 +582,39 @@ static const struct mv_hw_ops mv6xxx_ops = {
 static int msi;	      /* Use PCI msi; either zero (off, default) or non-zero */
 
 
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+	int rc;
+
+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+		rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+		if (rc) {
+			rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+			if (rc) {
+				dev_printk(KERN_ERR, &pdev->dev,
+					   "64-bit DMA enable failed\n");
+				return rc;
+			}
+		}
+	} else {
+		rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit DMA enable failed\n");
+			return rc;
+		}
+		rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+		if (rc) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit consistent DMA enable failed\n");
+			return rc;
+		}
+	}
+
+	return rc;
+}
+
 /*
  * Functions
  */
@@ -957,38 +987,30 @@ static void mv_port_stop(struct ata_port *ap)
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_fill_sg(struct ata_queued_cmd *qc)
+static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)
 {
 	struct mv_port_priv *pp = qc->ap->private_data;
-	unsigned int i = 0;
+	unsigned int n_sg = 0;
 	struct scatterlist *sg;
+	struct mv_sg *mv_sg;
 
+	mv_sg = pp->sg_tbl;
 	ata_for_each_sg(sg, qc) {
-		dma_addr_t addr;
-		u32 sg_len, len, offset;
+		dma_addr_t addr = sg_dma_address(sg);
+		u32 sg_len = sg_dma_len(sg);
 
-		addr = sg_dma_address(sg);
-		sg_len = sg_dma_len(sg);
+		mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
+		mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
+		mv_sg->flags_size = cpu_to_le32(sg_len & 0xffff);
 
-		while (sg_len) {
-			offset = addr & MV_DMA_BOUNDARY;
-			len = sg_len;
-			if ((offset + sg_len) > 0x10000)
-				len = 0x10000 - offset;
+		if (ata_sg_is_last(sg, qc))
+			mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
 
-			pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff);
-			pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
-			pp->sg_tbl[i].flags_size = cpu_to_le32(len & 0xffff);
-
-			sg_len -= len;
-			addr += len;
-
-			if (!sg_len && ata_sg_is_last(sg, qc))
-				pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
-
-			i++;
-		}
+		mv_sg++;
+		n_sg++;
 	}
+
+	return n_sg;
 }
 
 static inline unsigned mv_inc_q_index(unsigned index)
@@ -2327,6 +2349,10 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
+	rc = pci_go_64(pdev);
+	if (rc)
+		return rc;
+
 	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
 	if (probe_ent == NULL)
 		return -ENOMEM;

From cd0d3bbcdd650651b7ccfaf55d107e3fc237d95a Mon Sep 17 00:00:00 2001
From: Alan <alan@lxorguk.ukuu.org.uk>
Date: Fri, 2 Mar 2007 00:56:15 +0000
Subject: [PATCH 04/86] libata: dev_config does not need ap and adev passing

It used to be impossible to get from ata_device to ata_port but that is
no longer true. Various methods have been cleaned up over time but
dev_config still takes both and most users don't need both anyway. Tidy
this one up

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c       | 2 +-
 drivers/ata/pata_ali.c          | 2 +-
 drivers/ata/pata_it821x.c       | 3 +--
 drivers/ata/pata_pdc202xx_old.c | 3 +--
 drivers/ata/sata_inic162x.c     | 2 +-
 drivers/ata/sata_sil.c          | 6 +++---
 drivers/ata/sata_sil24.c        | 6 +++---
 include/linux/libata.h          | 2 +-
 8 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e7ad13d43c9f..2b998b321881 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1792,7 +1792,7 @@ int ata_dev_configure(struct ata_device *dev)
 		dev->horkage |= ATA_HORKAGE_DMA_RW_ONLY;
 
 	if (ap->ops->dev_config)
-		ap->ops->dev_config(ap, dev);
+		ap->ops->dev_config(dev);
 
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 11ea552a58ca..76243400c01d 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -324,7 +324,7 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *	slower PIO methods
  */
 
-static void ali_lock_sectors(struct ata_port *ap, struct ata_device *adev)
+static void ali_lock_sectors(struct ata_device *adev)
 {
 	adev->max_sectors = 255;
 }
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 35ecb2ba067b..be8c9ef8d0d4 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -520,7 +520,6 @@ static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused
 
 /**
  *	it821x_dev_config	-	Called each device identify
- *	@ap: ATA port
  *	@adev: Device that has just been identified
  *
  *	Perform the initial setup needed for each device that is chip
@@ -531,7 +530,7 @@ static int it821x_smart_set_mode(struct ata_port *ap, struct ata_device **unused
  *	basically we need to filter commands for this chip.
  */
 
-static void it821x_dev_config(struct ata_port *ap, struct ata_device *adev)
+static void it821x_dev_config(struct ata_device *adev)
 {
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
 
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 0a1493398913..a764ce8252aa 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -244,7 +244,6 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
 
 /**
  *	pdc2026x_dev_config	-	device setup hook
- *	@ap: ATA port
  *	@adev: newly found device
  *
  *	Perform chip specific early setup. We need to lock the transfer
@@ -252,7 +251,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
  *	barf.
  */
 
-static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev)
+static void pdc2026x_dev_config(struct ata_device *adev)
 {
 	adev->max_sectors = 256;
 }
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 1e21688bfcf2..4f5a6a1fb0ed 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -492,7 +492,7 @@ static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
 		inic_reset_port(inic_port_base(qc->ap));
 }
 
-static void inic_dev_config(struct ata_port *ap, struct ata_device *dev)
+static void inic_dev_config(struct ata_device *dev)
 {
 	/* inic can only handle upto LBA28 max sectors */
 	if (dev->max_sectors > ATA_MAX_SECTORS)
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 917b7ea4ef7c..170d36e6260f 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -114,7 +114,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
 #ifdef CONFIG_PM
 static int sil_pci_device_resume(struct pci_dev *pdev);
 #endif
-static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
+static void sil_dev_config(struct ata_device *dev);
 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static void sil_post_set_mode (struct ata_port *ap);
@@ -521,7 +521,6 @@ static void sil_thaw(struct ata_port *ap)
 
 /**
  *	sil_dev_config - Apply device/host-specific errata fixups
- *	@ap: Port containing device to be examined
  *	@dev: Device to be examined
  *
  *	After the IDENTIFY [PACKET] DEVICE step is complete, and a
@@ -548,8 +547,9 @@ static void sil_thaw(struct ata_port *ap)
  *	appreciated.
  *	- But then again UDMA5 is hardly anything to complain about
  */
-static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
+static void sil_dev_config(struct ata_device *dev)
 {
+	struct ata_port *ap = dev->ap;
 	int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
 	unsigned int n, quirks = 0;
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 5614df8c1ce2..6698c746e624 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -323,7 +323,7 @@ struct sil24_port_priv {
 	struct ata_taskfile tf;			/* Cached taskfile registers */
 };
 
-static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
+static void sil24_dev_config(struct ata_device *dev);
 static u8 sil24_check_status(struct ata_port *ap);
 static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
 static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
@@ -462,9 +462,9 @@ static int sil24_tag(int tag)
 	return tag;
 }
 
-static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
+static void sil24_dev_config(struct ata_device *dev)
 {
-	void __iomem *port = ap->ioaddr.cmd_addr;
+	void __iomem *port = dev->ap->ioaddr.cmd_addr;
 
 	if (dev->cdb_len == 16)
 		writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a41749820964..84787cad860d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -597,7 +597,7 @@ struct ata_port {
 struct ata_port_operations {
 	void (*port_disable) (struct ata_port *);
 
-	void (*dev_config) (struct ata_port *, struct ata_device *);
+	void (*dev_config) (struct ata_device *);
 
 	void (*set_piomode) (struct ata_port *, struct ata_device *);
 	void (*set_dmamode) (struct ata_port *, struct ata_device *);

From f0ef88ed413232daebfe675c7b1bbf100d604d4b Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Fri, 2 Feb 2007 12:36:25 -0500
Subject: [PATCH 05/86] RESEND: libata: check cdb len per dev instead of per
 host

Resending, with s/printk/DPRINTK/ as pointed out by Alan.

Fix libata to perform CDB len validation per device
rather than per host.  This way, validation still works
when we have a mix of 12-byte and 16-byte devices on
a common host interface.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 18 +-----------------
 drivers/ata/libata-scsi.c |  5 +++--
 2 files changed, 4 insertions(+), 19 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2b998b321881..99a881558e8d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1560,20 +1560,6 @@ static void ata_dev_config_ncq(struct ata_device *dev,
 		snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
 }
 
-static void ata_set_port_max_cmd_len(struct ata_port *ap)
-{
-	int i;
-
-	if (ap->scsi_host) {
-		unsigned int len = 0;
-
-		for (i = 0; i < ATA_MAX_DEVICES; i++)
-			len = max(len, ap->device[i].cdb_len);
-
-		ap->scsi_host->max_cmd_len = len;
-	}
-}
-
 /**
  *	ata_dev_configure - Configure the specified ATA/ATAPI device
  *	@dev: Target device to configure
@@ -1773,8 +1759,6 @@ int ata_dev_configure(struct ata_device *dev)
 		}
 	}
 
-	ata_set_port_max_cmd_len(ap);
-
 	/* limit bridge transfers to udma5, 200 sectors */
 	if (ata_dev_knobble(dev)) {
 		if (ata_msg_drv(ap) && print_info)
@@ -5670,7 +5654,7 @@ static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost)
 	shost->max_id = 16;
 	shost->max_lun = 1;
 	shost->max_channel = 1;
-	shost->max_cmd_len = 12;
+	shost->max_cmd_len = 16;
 }
 
 /**
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e9364434182c..7d41afe8ccbc 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2792,8 +2792,9 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
 {
 	int rc = 0;
 
-	if (unlikely(!scmd->cmd_len)) {
-		ata_dev_printk(dev, KERN_WARNING, "WARNING: zero len CDB\n");
+	if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len)) {
+		DPRINTK("bad CDB len=%u, max=%u\n",
+			scmd->cmd_len, dev->cdb_len);
 		scmd->result = DID_ERROR << 16;
 		done(scmd);
 		return 0;

From 8343f88999bfcf4c4169e964c8a5c040f40c5a77 Mon Sep 17 00:00:00 2001
From: Robert Hancock <hancockr@shaw.ca>
Date: Tue, 6 Mar 2007 02:37:51 -0800
Subject: [PATCH 06/86] libata: warn if speed limited due to 40-wire cable

Warn the user if a drive's transfer rate is limited because of a 40-wire
cable detection.

Signed-off-by: Robert Hancock <hancockr@shaw.ca>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 99a881558e8d..93e7b99d7819 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3425,19 +3425,7 @@ static void ata_dev_xfermask(struct ata_device *dev)
 	xfer_mask = ata_pack_xfermask(ap->pio_mask,
 				      ap->mwdma_mask, ap->udma_mask);
 
-	/* Apply cable rule here.  Don't apply it early because when
-	 * we handle hot plug the cable type can itself change.
-	 */
-	if (ap->cbl == ATA_CBL_PATA40)
-		xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
-	/* Apply drive side cable rule. Unknown or 80 pin cables reported
-	 * host side are checked drive side as well. Cases where we know a
-	 * 40wire cable is used safely for 80 are not checked here.
-	 */
-        if (ata_drive_40wire(dev->id) && (ap->cbl == ATA_CBL_PATA_UNK || ap->cbl == ATA_CBL_PATA80))
-		xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
-
-
+	/* drive modes available */
 	xfer_mask &= ata_pack_xfermask(dev->pio_mask,
 				       dev->mwdma_mask, dev->udma_mask);
 	xfer_mask &= ata_id_xfermask(dev->id);
@@ -3469,6 +3457,25 @@ static void ata_dev_xfermask(struct ata_device *dev)
 	if (ap->ops->mode_filter)
 		xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask);
 
+	/* Apply cable rule here.  Don't apply it early because when
+	 * we handle hot plug the cable type can itself change.
+	 * Check this last so that we know if the transfer rate was
+	 * solely limited by the cable.
+	 * Unknown or 80 wire cables reported host side are checked
+	 * drive side as well. Cases where we know a 40wire cable
+	 * is used safely for 80 are not checked here.
+	 */
+	if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
+		/* UDMA/44 or higher would be available */
+		if((ap->cbl == ATA_CBL_PATA40) ||
+   		    (ata_drive_40wire(dev->id) &&
+		     (ap->cbl == ATA_CBL_PATA_UNK ||
+                     ap->cbl == ATA_CBL_PATA80))) {
+		      	ata_dev_printk(dev, KERN_WARNING,
+				 "limited to UDMA/33 due to 40-wire cable\n");
+			xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
+		}
+
 	ata_unpack_xfermask(xfer_mask, &dev->pio_mask,
 			    &dev->mwdma_mask, &dev->udma_mask);
 }

From 5aea408df5ae459cb29b91d45fa0f8bc1bee924e Mon Sep 17 00:00:00 2001
From: Dmitriy Monakhov <dmonakhov@sw.ru>
Date: Tue, 6 Mar 2007 02:37:54 -0800
Subject: [PATCH 07/86] libata: handle ata_pci_device_do_resume() failure while
 resuming

Since commit:553c4aa630af7bc885e056d0436e4eb7f238579b
ata_pci_device_do_resume() can return error code, all callers was updated
except this one.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_inic162x.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 4f5a6a1fb0ed..11c3079ab6cc 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -642,7 +642,9 @@ static int inic_pci_device_resume(struct pci_dev *pdev)
 	void __iomem *mmio_base = host->iomap[MMIO_BAR];
 	int rc;
 
-	ata_pci_device_do_resume(pdev);
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
 
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
 		rc = init_controller(mmio_base, hpriv->cached_hctl);

From be0d18dff5fae83845801929f297977c10ab99ad Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 6 Mar 2007 02:37:56 -0800
Subject: [PATCH 08/86] libata: cable detection fixes

2.6.21-rc has horrible problems with libata and PATA cable types (and
thus speeds). This occurs because Tejun fixed a pile of other bugs and
we now do cable detect enforcement for drive side detection properly.

Unfortunately we don't do the process around cable detection right. Tejun
identified the problem and pointed to the right Annex in the spec, this patch
implements the rest of the needed changes.

We add a ->cable_detect() method called after the identify
sequence which allows a host to do host side detection at this point
should it wish, or to modify the results of the drive side identify.

This separate ->cable_detect method also cleans up a lot of code because
many drivers have their own error_handler methods which really just set
the cable type.

If there is no ->cable_detect method the cable type is left alone so a
driver setting it earlier (eg because it has the SATA flags set or
because it uses the old error_handler approach) will still do the right
thing (or at least the same thing) as before.

This patch simply adds the cable_detect method and helpers it doesn't use
them but other follow up patches will (ie Adrian please don't submit
patches to unexport them ;))

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 59 +++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |  7 +++++
 2 files changed, 66 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 93e7b99d7819..1e1140c9618b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1790,6 +1790,56 @@ err_out_nosup:
 	return rc;
 }
 
+/**
+ *	ata_cable_40wire	-	return 40pin cable type
+ *	@ap: port
+ *
+ *	Helper method for drivers which want to hardwire 40 pin cable
+ *	detection.
+ */
+
+int ata_cable_40wire(struct ata_port *ap)
+{
+	return ATA_CBL_PATA40;
+}
+
+/**
+ *	ata_cable_80wire	-	return 40pin cable type
+ *	@ap: port
+ *
+ *	Helper method for drivers which want to hardwire 80 pin cable
+ *	detection.
+ */
+
+int ata_cable_80wire(struct ata_port *ap)
+{
+	return ATA_CBL_PATA80;
+}
+
+/**
+ *	ata_cable_unknown	-	return unknown PATA cable.
+ *	@ap: port
+ *
+ *	Helper method for drivers which have no PATA cable detection.
+ */
+
+int ata_cable_unknown(struct ata_port *ap)
+{
+	return ATA_CBL_PATA_UNK;
+}
+
+/**
+ *	ata_cable_sata	-	return SATA cable type
+ *	@ap: port
+ *
+ *	Helper method for drivers which have SATA cables
+ */
+
+int ata_cable_sata(struct ata_port *ap)
+{
+	return ATA_CBL_SATA;
+}
+
 /**
  *	ata_bus_probe - Reset and probe ATA bus
  *	@ap: Bus to probe
@@ -1860,6 +1910,10 @@ int ata_bus_probe(struct ata_port *ap)
 			goto fail;
 	}
 
+	/* Now ask for the cable type as PDIAG- should have been released */
+	if (ap->ops->cable_detect)
+		ap->cbl = ap->ops->cable_detect(ap);
+
 	/* After the identify sequence we can now set up the devices. We do
 	   this in the normal order so that the user doesn't get confused */
 
@@ -6453,3 +6507,8 @@ EXPORT_SYMBOL_GPL(ata_dummy_irq_on);
 EXPORT_SYMBOL_GPL(ata_irq_ack);
 EXPORT_SYMBOL_GPL(ata_dummy_irq_ack);
 EXPORT_SYMBOL_GPL(ata_dev_try_classify);
+
+EXPORT_SYMBOL_GPL(ata_cable_40wire);
+EXPORT_SYMBOL_GPL(ata_cable_80wire);
+EXPORT_SYMBOL_GPL(ata_cable_unknown);
+EXPORT_SYMBOL_GPL(ata_cable_sata);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 84787cad860d..3451ef97a931 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -616,6 +616,8 @@ struct ata_port_operations {
 
 	void (*post_set_mode) (struct ata_port *ap);
 
+	int (*cable_detect) (struct ata_port *ap);
+
 	int  (*check_atapi_dma) (struct ata_queued_cmd *qc);
 
 	void (*bmdma_setup) (struct ata_queued_cmd *qc);
@@ -834,6 +836,11 @@ extern u8 ata_dummy_irq_on(struct ata_port *ap);
 extern u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq);
 extern u8 ata_dummy_irq_ack(struct ata_port *ap, unsigned int chk_drq);
 
+extern int ata_cable_40wire(struct ata_port *ap);
+extern int ata_cable_80wire(struct ata_port *ap);
+extern int ata_cable_sata(struct ata_port *ap);
+extern int ata_cable_unknown(struct ata_port *ap);
+
 /*
  * Timing helpers
  */

From b2248dac07cf057e4af3ec970e7d36a09f44fac8 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 6 Mar 2007 02:38:11 -0800
Subject: [PATCH 09/86] pata_cmd640: CMD640 PCI support

Support for the PCI CMD640 (not VLB)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/Kconfig       |  10 ++
 drivers/ata/Makefile      |   1 +
 drivers/ata/pata_cmd640.c | 298 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 309 insertions(+)
 create mode 100644 drivers/ata/pata_cmd640.c

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 7bdbe5a914d0..1410907d1ed2 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -209,6 +209,16 @@ config PATA_ATIIXP
 
 	  If unsure, say N.
 
+config PATA_CMD640_PCI
+	tristate "CMD640 PCI PATA support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the CMD640 PCI IDE
+	  interface chip. Only the primary channel is currently
+	  supported.
+
+	  If unsure, say N.
+
 config PATA_CMD64X
 	tristate "CMD64x PATA support (Very Experimental)"
 	depends on PCI&& EXPERIMENTAL
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 13d7397e0008..b7055e302650 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
 obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
+obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
 obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
 obj-$(CONFIG_PATA_CS5520)	+= pata_cs5520.o
 obj-$(CONFIG_PATA_CS5530)	+= pata_cs5530.o
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
new file mode 100644
index 000000000000..4d01d4692412
--- /dev/null
+++ b/drivers/ata/pata_cmd640.c
@@ -0,0 +1,298 @@
+/*
+ * pata_cmd640.c 	- CMD640 PCI PATA for new ATA layer
+ *			  (C) 2007 Red Hat Inc
+ *			  Alan Cox <alan@redhat.com>
+ *
+ * Based upon
+ *  linux/drivers/ide/pci/cmd640.c		Version 1.02  Sep 01, 1996
+ *
+ *  Copyright (C) 1995-1996  Linus Torvalds & authors (see driver)
+ *
+ *	This drives only the PCI version of the controller. If you have a
+ *	VLB one then we have enough docs to support it but you can write
+ *	your own code.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_cmd640"
+#define DRV_VERSION "0.0.3"
+
+struct cmd640_reg {
+	int last;
+	u8 reg58[ATA_MAX_DEVICES];
+};
+
+enum {
+	CFR = 0x50,
+	CNTRL = 0x51,
+	CMDTIM = 0x52,
+	ARTIM0 = 0x53,
+	DRWTIM0 = 0x54,
+	ARTIM23 = 0x57,
+	DRWTIM23 = 0x58,
+	BRST = 0x59
+};
+
+/**
+ *	cmd640_set_piomode	-	set initial PIO mode data
+ *	@adev: ATA device
+ *
+ *	Called to do the PIO mode setup.
+ */
+
+static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct cmd640_reg *timing = ap->private_data;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct ata_timing t;
+	const unsigned long T = 1000000 / 33;
+	const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
+	u8 reg;
+	int arttim = ARTIM0 + 2 * adev->devno;
+	struct ata_device *pair = ata_dev_pair(adev);
+
+	if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
+		printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
+		return;
+	}
+
+	/* The second channel has shared timings and the setup timing is
+	   messy to switch to merge it for worst case */
+	if (ap->port_no && pair) {
+		struct ata_timing p;
+		ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
+		ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP);
+	}
+
+	/* Make the timings fit */
+	if (t.recover > 16) {
+		t.active += t.recover - 16;
+		t.recover = 16;
+	}
+	if (t.active > 16)
+		t.active = 16;
+
+	/* Now convert the clocks into values we can actually stuff into
+	   the chip */
+
+	if (t.recover > 1)
+		t.recover--;	/* 640B only */
+	else
+		t.recover = 15;
+
+	if (t.setup > 4)
+		t.setup = 0xC0;
+	else
+		t.setup = setup_data[t.setup];
+
+	if (ap->port_no == 0) {
+		t.active &= 0x0F;	/* 0 = 16 */
+
+		/* Load setup timing */
+		pci_read_config_byte(pdev, arttim, &reg);
+		reg &= 0x3F;
+		reg |= t.setup;
+		pci_write_config_byte(pdev, arttim, reg);
+
+		/* Load active/recovery */
+		pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
+	} else {
+		/* Save the shared timings for channel, they will be loaded
+		   by qc_issue_prot. Reloading the setup time is expensive
+		   so we keep a merged one loaded */
+		pci_read_config_byte(pdev, ARTIM23, &reg);
+		reg &= 0x3F;
+		reg |= t.setup;
+		pci_write_config_byte(pdev, ARTIM23, reg);
+		timing->reg58[adev->devno] = (t.active << 4) | t.recover;
+	}
+}
+
+
+/**
+ *	cmd640_qc_issue_prot	-	command preparation hook
+ *	@qc: Command to be issued
+ *
+ *	Channel 1 has shared timings. We must reprogram the
+ *	clock each drive 2/3 switch we do.
+ */
+
+static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_device *adev = qc->dev;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct cmd640_reg *timing = ap->private_data;
+
+	if (ap->port_no != 0 && adev->devno != timing->last) {
+		pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
+		timing->last = adev->devno;
+	}
+	return ata_qc_issue_prot(qc);
+}
+
+/**
+ *	cmd640_port_start	-	port setup
+ *	@ap: ATA port being set up
+ *
+ *	The CMD640 needs to maintain private data structures so we
+ *	allocate space here.
+ */
+
+static int cmd640_port_start(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct cmd640_reg *timing;
+
+	int ret = ata_port_start(ap);
+	if (ret < 0)
+		return ret;
+
+	timing = devm_kzalloc(&pdev->dev, sizeof(struct cmd640_reg), GFP_KERNEL);
+	if (timing == NULL)
+		return -ENOMEM;
+	timing->last = -1;	/* Force a load */
+	ap->private_data = timing;
+	return ret;
+}
+
+static struct scsi_host_template cmd640_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
+	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
+};
+
+static struct ata_port_operations cmd640_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= cmd640_set_piomode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= ata_bmdma_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= cmd640_qc_issue_prot,
+
+	/* In theory this is not needed once we kill the prefetcher */
+	.data_xfer	= ata_data_xfer_noirq,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_on		= ata_irq_on,
+	.irq_ack	= ata_irq_ack,
+
+	.port_start	= cmd640_port_start,
+};
+
+static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	u8 r;
+	u8 ctrl;
+
+	static struct ata_port_info info = {
+		.sht = &cmd640_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.port_ops = &cmd640_port_ops
+	};
+
+	static struct ata_port_info *port_info[2] = { &info, &info };
+
+	/* CMD640 detected, commiserations */
+	pci_write_config_byte(pdev, 0x5C, 0x00);
+	/* Get version info */
+	pci_read_config_byte(pdev, CFR, &r);
+	/* PIO0 command cycles */
+	pci_write_config_byte(pdev, CMDTIM, 0);
+	/* 512 byte bursts (sector) */
+	pci_write_config_byte(pdev, BRST, 0x40);
+	/*
+	 * A reporter a long time ago
+	 * Had problems with the data fifo
+	 * So don't run the risk
+	 * Of putting crap on the disk
+	 * For its better just to go slow
+	 */
+	/* Do channel 0 */
+	pci_read_config_byte(pdev, CNTRL, &ctrl);
+	pci_write_config_byte(pdev, CNTRL, ctrl | 0xC0);
+	/* Ditto for channel 1 */
+	pci_read_config_byte(pdev, ARTIM23, &ctrl);
+	ctrl |= 0x0C;
+	pci_write_config_byte(pdev, ARTIM23, ctrl);
+
+	return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static int cmd640_reinit_one(struct pci_dev *pdev)
+{
+	return ata_pci_device_resume(pdev);
+}
+
+static const struct pci_device_id cmd640[] = {
+	{ PCI_VDEVICE(CMD, 0x640), 0 },
+	{ },
+};
+
+static struct pci_driver cmd640_pci_driver = {
+	.name 		= DRV_NAME,
+	.id_table	= cmd640,
+	.probe 		= cmd640_init_one,
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= cmd640_reinit_one,
+};
+
+static int __init cmd640_init(void)
+{
+	return pci_register_driver(&cmd640_pci_driver);
+}
+
+static void __exit cmd640_exit(void)
+{
+	pci_unregister_driver(&cmd640_pci_driver);
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cmd640);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cmd640_init);
+module_exit(cmd640_exit);

From 6a3d586d8e8a50e4cfd7f8c36d82a53c5614e05b Mon Sep 17 00:00:00 2001
From: "Morrison, Tom" <tmorrison@empirix.com>
Date: Tue, 6 Mar 2007 02:38:10 -0800
Subject: [PATCH 10/86] Support for Marvell 7042 Chip

Added Support for Marvell 7042 Chip - 7042 has same capabilities & behavior
as 6042.

Signed-off-by: Thomas A. Morrison <tmorrison@empirix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_mv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 7b73c73b3f34..2580beb70539 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -548,6 +548,9 @@ static const struct pci_device_id mv_pci_tbl[] = {
 
 	{ PCI_VDEVICE(TTI, 0x2310), chip_7042 },
 
+	/* add Marvell 7042 support */
+	{ PCI_VDEVICE(MARVELL, 0x7042), chip_7042 },
+
 	{ }			/* terminate list */
 };
 

From a0fcdc0259e98d1c16d96baea9ba8a8603e41791 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Fri, 9 Mar 2007 07:24:15 -0500
Subject: [PATCH 11/86] [libata] Update several PATA drivers for new
 ->cable_detect hook

All patches authored and signed-off-by Alan Cox, sent on Mar 7, 2007.
I merely combined them all into a single patch.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_hpt3x2n.c      | 29 ++++++++++++++++-------
 drivers/ata/pata_it821x.c       | 33 ++++----------------------
 drivers/ata/pata_mpc52xx.c      |  3 ++-
 drivers/ata/pata_mpiix.c        |  4 ++--
 drivers/ata/pata_ns87410.c      |  6 ++---
 drivers/ata/pata_oldpiix.c      |  6 ++---
 drivers/ata/pata_opti.c         |  5 ++--
 drivers/ata/pata_pcmcia.c       |  3 ++-
 drivers/ata/pata_pdc202xx_old.c | 42 +++++++--------------------------
 drivers/ata/pata_serverworks.c  | 20 +++++++---------
 drivers/ata/pata_sil680.c       | 11 +++------
 drivers/ata/pata_triflex.c      |  4 ++--
 drivers/ata/sata_via.c          | 35 +++++++--------------------
 13 files changed, 68 insertions(+), 133 deletions(-)

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 65f2e180e7fa..78323923143a 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x2n"
-#define DRV_VERSION	"0.3.2"
+#define DRV_VERSION	"0.3.3"
 
 enum {
 	HPT_PCI_FAST	=	(1 << 31),
@@ -115,14 +115,13 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed)
 }
 
 /**
- *	hpt3x2n_pre_reset	-	reset the hpt3x2n bus
- *	@ap: ATA port to reset
+ *	hpt3x2n_cable_detect	-	Detect the cable type
+ *	@ap: ATA port to detect on
  *
- *	Perform the initial reset handling for the 3x2n series controllers.
- *	Reset the hardware and state machine, obtain the cable type.
+ *	Return the cable type attached to this port
  */
 
-static int hpt3xn_pre_reset(struct ata_port *ap)
+static int hpt3x2n_cable_detect(struct ata_port *ap)
 {
 	u8 scr2, ata66;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -135,15 +134,26 @@ static int hpt3xn_pre_reset(struct ata_port *ap)
 	pci_write_config_byte(pdev, 0x5B, scr2);
 
 	if (ata66 & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
+		return ATA_CBL_PATA40;
 	else
-		ap->cbl = ATA_CBL_PATA80;
+		return ATA_CBL_PATA80;
+}
 
+/**
+ *	hpt3x2n_pre_reset	-	reset the hpt3x2n bus
+ *	@ap: ATA port to reset
+ *
+ *	Perform the initial reset handling for the 3x2n series controllers.
+ *	Reset the hardware and state machine,
+ */
+
+static int hpt3xn_pre_reset(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	/* Reset the state machine */
 	pci_write_config_byte(pdev, 0x50, 0x37);
 	pci_write_config_byte(pdev, 0x54, 0x37);
 	udelay(100);
-
 	return ata_std_prereset(ap);
 }
 
@@ -364,6 +374,7 @@ static struct ata_port_operations hpt3x2n_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= hpt3x2n_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= hpt3x2n_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index be8c9ef8d0d4..f1f8cec8c224 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.4"
+#define DRV_VERSION "0.3.6"
 
 struct it821x_dev
 {
@@ -112,31 +112,6 @@ struct it821x_dev
 
 static int it8212_noraid;
 
-/**
- *	it821x_pre_reset	-	probe
- *	@ap: ATA port
- *
- *	Set the cable type
- */
-
-static int it821x_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	it821x_error_handler	-	probe/reset
- *	@ap: ATA port
- *
- *	Set the cable type and trigger a probe
- */
-
-static void it821x_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, it821x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	it821x_program	-	program the PIO/MWDMA registers
  *	@ap: ATA port
@@ -666,8 +641,9 @@ static struct ata_port_operations it821x_smart_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= it821x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -702,8 +678,9 @@ static struct ata_port_operations it821x_passthru_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= it821x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= it821x_passthru_bmdma_start,
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 882c36eaf293..77b57321ff52 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -24,7 +24,7 @@
 
 
 #define DRV_NAME	"mpc52xx_ata"
-#define DRV_VERSION	"0.1.0"
+#define DRV_VERSION	"0.1.0ac2"
 
 
 /* Private structures used by the driver */
@@ -297,6 +297,7 @@ static struct ata_port_operations mpc52xx_ata_port_ops = {
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= mpc52xx_ata_error_handler,
+	.cable_detect		= ata_cable_40wire,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 4abe45ac19a2..1718eaca731f 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.5"
+#define DRV_VERSION "0.7.6"
 
 enum {
 	IDETIM = 0x6C,		/* IDE control register */
@@ -53,7 +53,6 @@ static int mpiix_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -185,6 +184,7 @@ static struct ata_port_operations mpiix_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= mpiix_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= mpiix_qc_issue_prot,
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 9944a28daa9c..078aeda9cf8d 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -28,13 +28,13 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ns87410"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.6"
 
 /**
  *	ns87410_pre_reset		-	probe begin
  *	@ap: ATA port
  *
- *	Set up cable type and use generic probe init
+ *	Check enabled ports
  */
 
 static int ns87410_pre_reset(struct ata_port *ap)
@@ -47,7 +47,6 @@ static int ns87410_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -177,6 +176,7 @@ static struct ata_port_operations ns87410_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ns87410_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ns87410_qc_issue_prot,
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index da68cd19efd6..dea4690340d1 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -25,7 +25,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_oldpiix"
-#define DRV_VERSION	"0.5.4"
+#define DRV_VERSION	"0.5.5"
 
 /**
  *	oldpiix_pre_reset		-	probe begin
@@ -44,7 +44,6 @@ static int oldpiix_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -65,7 +64,7 @@ static void oldpiix_pata_error_handler(struct ata_port *ap)
 /**
  *	oldpiix_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device whose timings we are configuring
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *
@@ -255,6 +254,7 @@ static const struct ata_port_operations oldpiix_pata_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= oldpiix_pata_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 3fd3a35c2241..13b63e21838d 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -34,7 +34,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.8"
+#define DRV_VERSION "0.2.9"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
@@ -61,8 +61,6 @@ static int opti_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -198,6 +196,7 @@ static struct ata_port_operations opti_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= opti_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 103720f873c8..820332a7ec7b 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
 
 
 #define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.3.1"
 
 /*
  *	Private data structure to glue stuff together
@@ -84,6 +84,7 @@ static struct ata_port_operations pcmcia_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index a764ce8252aa..ee636beb05e1 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -22,45 +22,17 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.4.0"
+#define DRV_VERSION "0.4.2"
 
-/**
- *	pdc2024x_pre_reset		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generic probe init
- */
-
-static int pdc2024x_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-
-static void pdc2024x_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
-static int pdc2026x_pre_reset(struct ata_port *ap)
+static int pdc2026x_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u16 cis;
 
 	pci_read_config_word(pdev, 0x50, &cis);
 	if (cis & (1 << (10 + ap->port_no)))
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
-
-	return ata_std_prereset(ap);
-}
-
-static void pdc2026x_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+		return ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
 }
 
 /**
@@ -291,8 +263,9 @@ static struct ata_port_operations pdc2024x_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= pdc2024x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -325,8 +298,9 @@ static struct ata_port_operations pdc2026x_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= pdc2026x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= pdc2026x_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= pdc2026x_bmdma_start,
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 598eef810a74..283e9afade01 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -1,5 +1,5 @@
 /*
- * ata-serverworks.c 	- Serverworks PATA for new ATA layer
+ * pata_serverworks.c 	- Serverworks PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
  *			  Alan Cox <alan@redhat.com>
  *
@@ -137,14 +137,14 @@ static struct sv_cable_table cable_detect[] = {
 };
 
 /**
- *	serverworks_pre_reset		-	cable detection
+ *	serverworks_cable_detect	-	cable detection
  *	@ap: ATA port
  *
  *	Perform cable detection according to the device and subvendor
  *	identifications
  */
 
-static int serverworks_pre_reset(struct ata_port *ap) {
+static int serverworks_cable_detect(struct ata_port *ap) {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	struct sv_cable_table *cb = cable_detect;
 
@@ -152,8 +152,7 @@ static int serverworks_pre_reset(struct ata_port *ap) {
 		if (cb->device == pdev->device &&
 		    (cb->subvendor == pdev->subsystem_vendor ||
 		      cb->subvendor == PCI_ANY_ID)) {
-			ap->cbl = cb->cable_detect(ap);
-			return ata_std_prereset(ap);
+			return cb->cable_detect(ap);
 		}
 		cb++;
 	}
@@ -162,11 +161,6 @@ static int serverworks_pre_reset(struct ata_port *ap) {
 	return -1;	/* kill compiler warning */
 }
 
-static void serverworks_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, serverworks_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	serverworks_is_csb	-	Check for CSB or OSB
  *	@pdev: PCI device to check
@@ -339,8 +333,9 @@ static struct ata_port_operations serverworks_osb4_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= serverworks_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= serverworks_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -374,8 +369,9 @@ static struct ata_port_operations serverworks_csb_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= serverworks_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= serverworks_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index dab2889a556f..6770820cfca9 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.5"
+#define DRV_VERSION "0.4.6"
 
 /**
  *	sil680_selreg		-	return register base
@@ -91,12 +91,6 @@ static int sil680_cable_detect(struct ata_port *ap) {
 		return ATA_CBL_PATA40;
 }
 
-static int sil680_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = sil680_cable_detect(ap);
-	return ata_std_prereset(ap);
-}
-
 /**
  *	sil680_bus_reset	-	reset the SIL680 bus
  *	@ap: ATA port to reset
@@ -119,7 +113,7 @@ static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes)
 
 static void sil680_error_handler(struct ata_port *ap)
 {
-	ata_bmdma_drive_eh(ap, sil680_pre_reset, sil680_bus_reset, NULL, ata_std_postreset);
+	ata_bmdma_drive_eh(ap, ata_std_prereset, sil680_bus_reset, NULL, ata_std_postreset);
 }
 
 /**
@@ -257,6 +251,7 @@ static struct ata_port_operations sil680_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= sil680_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= sil680_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 71418f2a0cdb..e618ffd6e944 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -43,7 +43,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_triflex"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
 
 /**
  *	triflex_prereset		-	probe begin
@@ -63,7 +63,6 @@ static int triflex_prereset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -214,6 +213,7 @@ static struct ata_port_operations triflex_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= triflex_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= triflex_bmdma_start,
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 598e6a26a481..842ccf601224 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -78,8 +78,7 @@ static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static void svia_noop_freeze(struct ata_port *ap);
 static void vt6420_error_handler(struct ata_port *ap);
-static void vt6421_sata_error_handler(struct ata_port *ap);
-static void vt6421_pata_error_handler(struct ata_port *ap);
+static int vt6421_pata_cable_detect(struct ata_port *ap);
 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
 static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
 static int vt6421_port_start(struct ata_port *ap);
@@ -172,8 +171,9 @@ static const struct ata_port_operations vt6421_pata_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= vt6421_pata_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= vt6421_pata_cable_detect,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -203,8 +203,9 @@ static const struct ata_port_operations vt6421_sata_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= vt6421_sata_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_sata,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -330,35 +331,15 @@ static void vt6420_error_handler(struct ata_port *ap)
 				  NULL, ata_std_postreset);
 }
 
-static int vt6421_pata_prereset(struct ata_port *ap)
+static int vt6421_pata_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u8 tmp;
 
 	pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp);
 	if (tmp & 0x10)
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-	return 0;
-}
-
-static void vt6421_pata_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, vt6421_pata_prereset, ata_std_softreset,
-				  NULL, ata_std_postreset);
-}
-
-static int vt6421_sata_prereset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_SATA;
-	return 0;
-}
-
-static void vt6421_sata_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, vt6421_sata_prereset, ata_std_softreset,
-				  NULL, ata_std_postreset);
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev)

From 5816fbbf22470b687964462e6c1f18165b291f22 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 7 Mar 2007 16:46:20 +0000
Subject: [PATCH 12/86] pata_it8213: Cable detect

Another not-quite PIIX, another cable type conversion

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_it8213.c | 36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index ea734701555e..011306ef8334 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -25,8 +25,8 @@
  *	it8213_pre_reset	-	check for 40/80 pin
  *	@ap: Port
  *
- *	Perform cable detection for the 8213 ATA interface. This is
- *	different to the PIIX arrangement
+ *	Filter out ports by the enable bits before doing the normal reset
+ *	and probe.
  */
 
 static int it8213_pre_reset(struct ata_port *ap)
@@ -34,23 +34,14 @@ static int it8213_pre_reset(struct ata_port *ap)
 	static const struct pci_bits it8213_enable_bits[] = {
 		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
 	};
-
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
-
 	if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	pci_read_config_byte(pdev, 0x42, &tmp);
-	if (tmp & 2)	/* The initial docs are incorrect */
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
 	return ata_std_prereset(ap);
 }
 
 /**
- *	it8213_probe_reset - Probe specified port on PATA host controller
+ *	it8213_error_handler - Probe specified port on PATA host controller
  *	@ap: Port to probe
  *
  *	LOCKING:
@@ -62,10 +53,28 @@ static void it8213_error_handler(struct ata_port *ap)
 	ata_bmdma_drive_eh(ap, it8213_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
 }
 
+/**
+ *	it8213_cable_detect	-	check for 40/80 pin
+ *	@ap: Port
+ *
+ *	Perform cable detection for the 8213 ATA interface. This is
+ *	different to the PIIX arrangement
+ */
+
+static int it8213_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
+	pci_read_config_byte(pdev, 0x42, &tmp);
+	if (tmp & 2)	/* The initial docs are incorrect */
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
 /**
  *	it8213_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device whose timings we are configuring
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *
@@ -268,6 +277,7 @@ static const struct ata_port_operations it8213_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= it8213_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= it8213_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,

From 307c6054ad67428ad4e2bd4e5faae54fc4f8bcd2 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 7 Mar 2007 16:48:09 +0000
Subject: [PATCH 13/86] pata_marvell: Cable and reset fixes

There are two changes here. Firstly we switch to a cable detect method,
secondly the old code forgot to call ata_std_prereset() but somehow
managed to work anyway. Fix the missing call.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_marvell.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 6dd7c4ef3e66..d9b94a1b6954 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,7 +20,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_marvell"
-#define DRV_VERSION	"0.1.1"
+#define DRV_VERSION	"0.1.4"
 
 /**
  *	marvell_pre_reset	-	check for 40/80 pin
@@ -52,22 +52,23 @@ static int marvell_pre_reset(struct ata_port *ap)
 	if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
 	    (!(devices & 0x10)))	/* PATA enable ? */
 		return -ENOENT;
+	return ata_std_prereset(ap);
+}
 
+static int marvell_cable_detect(struct ata_port *ap)
+{
 	/* Cable type */
 	switch(ap->port_no)
 	{
 	case 0:
 		if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
-			ap->cbl = ATA_CBL_PATA40;
-		else
-			ap->cbl = ATA_CBL_PATA80;
-		break;
-
+			return ATA_CBL_PATA40;
+		return ATA_CBL_PATA80;
 	case 1: /* Legacy SATA port */
-		ap->cbl = ATA_CBL_SATA;
-		break;
+		return ATA_CBL_SATA;
 	}
-	return ata_std_prereset(ap);
+	BUG();
+	return 0;	/* Our BUG macro needs the right markup */
 }
 
 /**
@@ -123,6 +124,7 @@ static const struct ata_port_operations marvell_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= marvell_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= marvell_cable_detect,
 
 	/* BMDMA handling is PCI ATA format, use helpers */
 	.bmdma_setup		= ata_bmdma_setup,

From 2e413f510f1b77846e0e7728b991849e697d7f8b Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 7 Mar 2007 16:54:24 +0000
Subject: [PATCH 14/86] pata_sis: Clean up using cable_detect methods

This changeset revolves around the fact that all the SiS controllers have
the same enable bits, but differing cable detection methods. Previously
that meant each type had its own error_handler methods. Instead we can
now implement different ->cable_detect methods and share a single
error_handler which does the filtering by enable bits.

In addition we had some auto const arrays that should be static const. I'm
not sure if gcc already treats them intelligently but adding the static
will make sure.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_sis.c | 171 +++++++++++++++--------------------------
 1 file changed, 60 insertions(+), 111 deletions(-)

diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 8dc3bc4f5863..a3fbcee6fb33 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -35,7 +35,7 @@
 #include "sis.h"
 
 #define DRV_NAME	"pata_sis"
-#define DRV_VERSION	"0.5.0"
+#define DRV_VERSION	"0.5.1"
 
 struct sis_chipset {
 	u16 device;			/* PCI host ID */
@@ -86,14 +86,55 @@ static int sis_port_base(struct ata_device *adev)
 }
 
 /**
- *	sis_133_pre_reset	-	check for 40/80 pin
+ *	sis_133_cable_detect	-	check for 40/80 pin
  *	@ap: Port
  *
  *	Perform cable detection for the later UDMA133 capable
  *	SiS chipset.
  */
 
-static int sis_133_pre_reset(struct ata_port *ap)
+static int sis_133_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u16 tmp;
+
+	/* The top bit of this register is the cable detect bit */
+	pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp);
+	if ((tmp & 0x8000) && !sis_short_ata40(pdev))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
+/**
+ *	sis_66_cable_detect	-	check for 40/80 pin
+ *	@ap: Port
+ *
+ *	Perform cable detection on the UDMA66, UDMA100 and early UDMA133
+ *	SiS IDE controllers.
+ */
+
+static int sis_66_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
+
+	/* Older chips keep cable detect in bits 4/5 of reg 0x48 */
+	pci_read_config_byte(pdev, 0x48, &tmp);
+	tmp >>= ap->port_no;
+	if ((tmp & 0x10) && !sis_short_ata40(pdev))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
+
+/**
+ *	sis_pre_reset		-	probe begin
+ *	@ap: ATA port
+ *
+ *	Set up cable type and use generic probe init
+ */
+
+static int sis_pre_reset(struct ata_port *ap)
 {
 	static const struct pci_bits sis_enable_bits[] = {
 		{ 0x4aU, 1U, 0x02UL, 0x02UL },	/* port 0 */
@@ -101,21 +142,13 @@ static int sis_133_pre_reset(struct ata_port *ap)
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u16 tmp;
 
 	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	/* The top bit of this register is the cable detect bit */
-	pci_read_config_word(pdev, 0x50 + 2 * ap->port_no, &tmp);
-	if ((tmp & 0x8000) && !sis_short_ata40(pdev))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-
 	return ata_std_prereset(ap);
 }
 
+
 /**
  *	sis_error_handler - Probe specified port on PATA host controller
  *	@ap: Port to probe
@@ -124,97 +157,9 @@ static int sis_133_pre_reset(struct ata_port *ap)
  *	None (inherited from caller).
  */
 
-static void sis_133_error_handler(struct ata_port *ap)
+static void sis_error_handler(struct ata_port *ap)
 {
-	ata_bmdma_drive_eh(ap, sis_133_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
-/**
- *	sis_66_pre_reset	-	check for 40/80 pin
- *	@ap: Port
- *
- *	Perform cable detection on the UDMA66, UDMA100 and early UDMA133
- *	SiS IDE controllers.
- */
-
-static int sis_66_pre_reset(struct ata_port *ap)
-{
-	static const struct pci_bits sis_enable_bits[] = {
-		{ 0x4aU, 1U, 0x02UL, 0x02UL },	/* port 0 */
-		{ 0x4aU, 1U, 0x04UL, 0x04UL },	/* port 1 */
-	};
-
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
-
-	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
-		ata_port_disable(ap);
-		ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
-		return 0;
-	}
-	/* Older chips keep cable detect in bits 4/5 of reg 0x48 */
-	pci_read_config_byte(pdev, 0x48, &tmp);
-	tmp >>= ap->port_no;
-	if ((tmp & 0x10) && !sis_short_ata40(pdev))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-
-	return ata_std_prereset(ap);
-}
-
-/**
- *	sis_66_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *	@classes:
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void sis_66_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, sis_66_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-/**
- *	sis_old_pre_reset		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generic probe init
- */
-
-static int sis_old_pre_reset(struct ata_port *ap)
-{
-	static const struct pci_bits sis_enable_bits[] = {
-		{ 0x4aU, 1U, 0x02UL, 0x02UL },	/* port 0 */
-		{ 0x4aU, 1U, 0x04UL, 0x04UL },	/* port 1 */
-	};
-
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) {
-		ata_port_disable(ap);
-		ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
-		return 0;
-	}
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-
-/**
- *	sis_old_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void sis_old_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, sis_old_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+	ata_bmdma_drive_eh(ap, sis_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
 }
 
 /**
@@ -494,7 +439,7 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a
 	int drive_pci = sis_port_base(adev);
 	u16 timing;
 
-	const u16 udma_bits[]  = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
+	static const u16 udma_bits[]  = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100};
 
 	pci_read_config_word(pdev, drive_pci, &timing);
 
@@ -531,8 +476,8 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	u32 reg54;
 
 	/* bits 4- cycle time 8 - cvs time */
-	const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
-	const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
+	static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
+	static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
 
 	/* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
 	pci_read_config_dword(pdev, 0x54, &reg54);
@@ -595,8 +540,9 @@ static const struct ata_port_operations sis_133_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_133_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= sis_133_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -628,8 +574,9 @@ static const struct ata_port_operations sis_133_early_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_66_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= sis_66_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -661,9 +608,9 @@ static const struct ata_port_operations sis_100_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_66_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-
+	.cable_detect		= sis_66_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -692,10 +639,11 @@ static const struct ata_port_operations sis_66_ops = {
 	.check_status		= ata_check_status,
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
+	.cable_detect		= sis_66_cable_detect,
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_66_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
 	.bmdma_setup		= ata_bmdma_setup,
@@ -728,8 +676,9 @@ static const struct ata_port_operations sis_old_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= sis_old_error_handler,
+	.error_handler		= sis_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,

From 97cb81c335565f3ce27cd26d71480dff0211797a Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 7 Mar 2007 16:56:54 +0000
Subject: [PATCH 15/86] pata_via: Use cable_detect method

We end up shifting a few bits of logic around in this driver but the
basic change is the same.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_via.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 946ade0e1f1b..96b71791d2f4 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -62,7 +62,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.3.1"
 
 /*
  *	The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -135,16 +135,23 @@ static const struct via_isa_bridge {
  */
 
 static int via_cable_detect(struct ata_port *ap) {
+	const struct via_isa_bridge *config = ap->host->private_data;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u32 ata66;
 
+	/* Early chips are 40 wire */
+	if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
+		return ATA_CBL_PATA40;
+	/* UDMA 66 chips have only drive side logic */
+	else if((config->flags & VIA_UDMA) < VIA_UDMA_100)
+		return ATA_CBL_PATA_UNK;
+	/* UDMA 100 or later */
 	pci_read_config_dword(pdev, 0x50, &ata66);
 	/* Check both the drive cable reporting bits, we might not have
 	   two drives */
 	if (ata66 & (0x10100000 >> (16 * ap->port_no)))
 		return ATA_CBL_PATA80;
-	else
-		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA40;
 }
 
 static int via_pre_reset(struct ata_port *ap)
@@ -156,22 +163,10 @@ static int via_pre_reset(struct ata_port *ap)
 			{ 0x40, 1, 0x02, 0x02 },
 			{ 0x40, 1, 0x01, 0x01 }
 		};
-
 		struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
 		if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no]))
 			return -ENOENT;
 	}
-
-	if ((config->flags & VIA_UDMA) >= VIA_UDMA_100)
-		ap->cbl = via_cable_detect(ap);
-	/* The UDMA66 series has no cable detect so do drive side detect */
-	else if ((config->flags & VIA_UDMA) < VIA_UDMA_66)
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA_UNK;
-
-
 	return ata_std_prereset(ap);
 }
 
@@ -327,6 +322,7 @@ static struct ata_port_operations via_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= via_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= via_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -362,6 +358,7 @@ static struct ata_port_operations via_port_ops_noirq = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= via_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= via_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,

From 7938a72db4d82f3caf3ae22aafa1ea18793a3149 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 7 Mar 2007 16:43:29 +0000
Subject: [PATCH 16/86] pata_cmd640: Multiple updates

Fix suspend/resume support
Write 0x5B to 0 not 0x5C

The former is important as we must kill the FIFO on a resume

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_cmd640.c | 34 ++++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 4d01d4692412..ab9468d16edb 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_cmd640"
-#define DRV_VERSION "0.0.3"
+#define DRV_VERSION "0.0.5"
 
 struct cmd640_reg {
 	int last;
@@ -43,6 +43,7 @@ enum {
 
 /**
  *	cmd640_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA port
  *	@adev: ATA device
  *
  *	Called to do the PIO mode setup.
@@ -106,7 +107,7 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
 	} else {
 		/* Save the shared timings for channel, they will be loaded
-		   by qc_issue_prot. Reloading the setup time is expensive
+		   by qc_issue_prot. Reloading the setup time is expensive 
 		   so we keep a merged one loaded */
 		pci_read_config_byte(pdev, ARTIM23, &reg);
 		reg &= 0x3F;
@@ -219,29 +220,20 @@ static struct ata_port_operations cmd640_port_ops = {
 	.port_start	= cmd640_port_start,
 };
 
-static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+static void cmd640_hardware_init(struct pci_dev *pdev)
 {
 	u8 r;
 	u8 ctrl;
 
-	static struct ata_port_info info = {
-		.sht = &cmd640_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-		.pio_mask = 0x1f,
-		.port_ops = &cmd640_port_ops
-	};
-
-	static struct ata_port_info *port_info[2] = { &info, &info };
-
 	/* CMD640 detected, commiserations */
-	pci_write_config_byte(pdev, 0x5C, 0x00);
+	pci_write_config_byte(pdev, 0x5B, 0x00);
 	/* Get version info */
 	pci_read_config_byte(pdev, CFR, &r);
 	/* PIO0 command cycles */
 	pci_write_config_byte(pdev, CMDTIM, 0);
 	/* 512 byte bursts (sector) */
 	pci_write_config_byte(pdev, BRST, 0x40);
-	/*
+	/* 
 	 * A reporter a long time ago
 	 * Had problems with the data fifo
 	 * So don't run the risk
@@ -255,12 +247,26 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_read_config_byte(pdev, ARTIM23, &ctrl);
 	ctrl |= 0x0C;
 	pci_write_config_byte(pdev, ARTIM23, ctrl);
+}
 
+static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	static struct ata_port_info info = {
+		.sht = &cmd640_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.port_ops = &cmd640_port_ops
+	};
+
+	static struct ata_port_info *port_info[2] = { &info, &info };
+
+	cmd640_hardware_init(pdev);
 	return ata_pci_init_one(pdev, port_info, 2);
 }
 
 static int cmd640_reinit_one(struct pci_dev *pdev)
 {
+	cmd640_hardware_init(pdev);
 	return ata_pci_device_resume(pdev);
 }
 

From 942d09470c3fb3254905c75f0cc9cd2d0dff24dd Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 23:24:49 +0000
Subject: [PATCH 17/86] libata: Restore Kconfig updated experimental levels and
 correct

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/Kconfig | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 1410907d1ed2..c679bba4789b 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -184,7 +184,7 @@ config PATA_ALI
 	  If unsure, say N.
 
 config PATA_AMD
-	tristate "AMD/NVidia PATA support (Experimental)"
+	tristate "AMD/NVidia PATA support"
 	depends on PCI
 	help
 	  This option enables support for the AMD and NVidia PATA
@@ -283,7 +283,7 @@ config ATA_GENERIC
 	  If unsure, say N.
 
 config PATA_HPT366
-	tristate "HPT 366/368 PATA support (Very Experimental)"
+	tristate "HPT 366/368 PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the HPT 366 and 368
@@ -292,7 +292,7 @@ config PATA_HPT366
 	  If unsure, say N.
 
 config PATA_HPT37X
-	tristate "HPT 370/370A/371/372/374/302 PATA support (Very Experimental)"
+	tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the majority of the later HPT
@@ -319,7 +319,7 @@ config PATA_HPT3X3
 	  If unsure, say N.
 
 config PATA_ISAPNP
-	tristate "ISA Plug and Play PATA support (Very Experimental)"
+	tristate "ISA Plug and Play PATA support (Experimental)"
 	depends on EXPERIMENTAL && ISAPNP
 	help
 	  This option enables support for ISA plug & play ATA
@@ -328,8 +328,8 @@ config PATA_ISAPNP
 	  If unsure, say N.
 
 config PATA_IT821X
-	tristate "IT8211/2 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "IT8211/2 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the ITE 8211 and 8212
 	  PATA controllers via the new ATA layer, including RAID
@@ -400,10 +400,10 @@ config PATA_MPIIX
 	  If unsure, say N.
 
 config PATA_OLDPIIX
-	tristate "Intel PATA old PIIX support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Intel PATA old PIIX support"
+	depends on PCI
 	help
-	  This option enables support for old(?) PIIX PATA support.
+	  This option enables support for early PIIX PATA support.
 
 	  If unsure, say N.
 
@@ -454,7 +454,7 @@ config PATA_PCMCIA
 	  If unsure, say N.
 
 config PATA_PDC_OLD
-	tristate "Older Promise PATA controller support (Very Experimental)"
+	tristate "Older Promise PATA controller support (Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the Promise 20246, 20262, 20263,
@@ -469,7 +469,7 @@ config PATA_QDI
 	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 
 config PATA_RADISYS
-	tristate "RADISYS 82600 PATA support (Very experimental)"
+	tristate "RADISYS 82600 PATA support (Very Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the RADISYS 82600
@@ -487,7 +487,7 @@ config PATA_RZ1000
 	  If unsure, say N.
 
 config PATA_SC1200
-	tristate "SC1200 PATA support (Raving Lunatic)"
+	tristate "SC1200 PATA support (Very Experimental)"
 	depends on PCI && EXPERIMENTAL
 	help
 	  This option enables support for the NatSemi/AMD SC1200 SoC
@@ -496,8 +496,8 @@ config PATA_SC1200
 	  If unsure, say N.
 
 config PATA_SERVERWORKS
-	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 	  HT1000 PATA controllers, via the new ATA layer.

From 2e41e8e67af4cb0917793922fc8f55d3eeb6fa43 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 23:19:19 +0000
Subject: [PATCH 18/86] libata-core: fix comments on cable type

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1e1140c9618b..89a77e1793fa 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1791,10 +1791,10 @@ err_out_nosup:
 }
 
 /**
- *	ata_cable_40wire	-	return 40pin cable type
+ *	ata_cable_40wire	-	return 40 wire cable type
  *	@ap: port
  *
- *	Helper method for drivers which want to hardwire 40 pin cable
+ *	Helper method for drivers which want to hardwire 40 wire cable
  *	detection.
  */
 
@@ -1804,10 +1804,10 @@ int ata_cable_40wire(struct ata_port *ap)
 }
 
 /**
- *	ata_cable_80wire	-	return 40pin cable type
+ *	ata_cable_80wire	-	return 80 wire cable type
  *	@ap: port
  *
- *	Helper method for drivers which want to hardwire 80 pin cable
+ *	Helper method for drivers which want to hardwire 80 wire cable
  *	detection.
  */
 

From e2a9752a21df4407a2094fb3345878d18a6c6d68 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 23:06:47 +0000
Subject: [PATCH 19/86] sata_promise: Switch to cable method, clean up some
 bits as a result

Signed-off-by: Alan Cox <number6@the-village.bc.nu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_promise.c | 30 ++++++++++++------------------
 1 file changed, 12 insertions(+), 18 deletions(-)

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 2339813ce9f6..78df5464e015 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,7 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"2.00"
+#define DRV_VERSION	"2.01"
 
 
 enum {
@@ -131,7 +131,7 @@ static void pdc_freeze(struct ata_port *ap);
 static void pdc_thaw(struct ata_port *ap);
 static void pdc_error_handler(struct ata_port *ap);
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
-
+static int pdc_cable_detect(struct ata_port *ap);
 
 static struct scsi_host_template pdc_ata_sht = {
 	.module			= THIS_MODULE,
@@ -166,6 +166,7 @@ static const struct ata_port_operations pdc_sata_ops = {
 	.thaw			= pdc_thaw,
 	.error_handler		= pdc_error_handler,
 	.post_internal_cmd	= pdc_post_internal_cmd,
+	.cable_detect		= pdc_cable_detect,
 	.data_xfer		= ata_data_xfer,
 	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
@@ -374,18 +375,18 @@ static void pdc_reset_port(struct ata_port *ap)
 	readl(mmio);	/* flush */
 }
 
-static void pdc_pata_cbl_detect(struct ata_port *ap)
+static int pdc_cable_detect(struct ata_port *ap)
 {
 	u8 tmp;
 	void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
 
-	tmp = readb(mmio);
-
-	if (tmp & 0x01) {
-		ap->cbl = ATA_CBL_PATA40;
-		ap->udma_mask &= ATA_UDMA_MASK_40C;
-	} else
-		ap->cbl = ATA_CBL_PATA80;
+	if (!sata_scr_valid(ap)) {
+		tmp = readb(mmio);
+		if (tmp & 0x01)
+			return ATA_CBL_PATA40;
+		return ATA_CBL_PATA80;
+	}
+	return ATA_CBL_SATA;
 }
 
 static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
@@ -555,13 +556,6 @@ static void pdc_thaw(struct ata_port *ap)
 	readl(mmio + PDC_CTLSTAT); /* flush */
 }
 
-static int pdc_pre_reset(struct ata_port *ap)
-{
-	if (!sata_scr_valid(ap))
-		pdc_pata_cbl_detect(ap);
-	return ata_std_prereset(ap);
-}
-
 static void pdc_error_handler(struct ata_port *ap)
 {
 	ata_reset_fn_t hardreset;
@@ -574,7 +568,7 @@ static void pdc_error_handler(struct ata_port *ap)
 		hardreset = sata_std_hardreset;
 
 	/* perform recovery */
-	ata_do_eh(ap, pdc_pre_reset, ata_std_softreset, hardreset,
+	ata_do_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
 		  ata_std_postreset);
 }
 

From 570cb62deef574db10bcf1b4e9a8a0cbf7b101ee Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 22:54:04 +0000
Subject: [PATCH 20/86] pata_platform: Add cable_detect method

Signed-off-by: Alan Cox <number6@the-village.bc.nu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_platform.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 4b82a5435a4e..507eb1ee05f8 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -80,6 +80,7 @@ static struct ata_port_operations pata_platform_port_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_unknown,
 
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,

From 2a25dfe4f43b2199376424dce67ed11e3e276467 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 22:57:03 +0000
Subject: [PATCH 21/86] pata_rz1000: support cable_detect

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_rz1000.c | 28 ++--------------------------
 1 file changed, 2 insertions(+), 26 deletions(-)

diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index f522daa2a6aa..85c45290eeee 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -24,31 +24,6 @@
 #define DRV_VERSION	"0.2.3"
 
 
-/**
- *	rz1000_prereset		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generics
- */
-
-static int rz1000_prereset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	rz1000_error_handler		-	probe reset
- *	@ap: ATA port
- *
- *	Perform the ATA standard reset sequence
- */
-
-static void rz1000_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, rz1000_prereset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	rz1000_set_mode		-	mode setting function
  *	@ap: ATA interface
@@ -122,8 +97,9 @@ static struct ata_port_operations rz1000_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= rz1000_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,

From 745975c052cc8e808860c8634a2efdcc2da6dd01 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 22:58:03 +0000
Subject: [PATCH 22/86] pata_sc1200: restore cable type

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_sc1200.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 93b3ed0f9e8a..66e8ff467c8d 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -216,6 +216,7 @@ static struct ata_port_operations sc1200_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,

From d36a76482c19c186aa638446def39ec643993955 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 22:56:07 +0000
Subject: [PATCH 23/86] pata_radisys: support cable_detect

Signed-off-by: Alan Cox <number6@the-village.bc.nu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_radisys.c | 37 +++++--------------------------------
 1 file changed, 5 insertions(+), 32 deletions(-)

diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 9a9132c9e331..1c54673e008d 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -24,40 +24,12 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_radisys"
-#define DRV_VERSION	"0.4.1"
-
-/**
- *	radisys_probe_init		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generic probe init
- */
-
-static int radisys_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-
-/**
- *	radisys_pata_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *	@classes:
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void radisys_pata_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, radisys_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
+#define DRV_VERSION	"0.4.4"
 
 /**
  *	radisys_set_piomode - Initialize host controller PATA PIO timings
- *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@ap: ATA port
+ *	@adev: Device whose timings we are configuring
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *
@@ -248,8 +220,9 @@ static const struct ata_port_operations radisys_pata_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= radisys_pata_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_unknown,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,

From 847086069cdb5eac14f70cd0aea8545d499c80b4 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 19:27:31 +0000
Subject: [PATCH 24/86] pata_atiixp: support ->cable_detect

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_atiixp.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 51d9923be02e..39c871a3ddac 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -22,7 +22,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_atiixp"
-#define DRV_VERSION "0.4.4"
+#define DRV_VERSION "0.4.5"
 
 enum {
 	ATIIXP_IDE_PIO_TIMING	= 0x40,
@@ -35,23 +35,15 @@ enum {
 
 static int atiixp_pre_reset(struct ata_port *ap)
 {
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	static const struct pci_bits atiixp_enable_bits[] = {
 		{ 0x48, 1, 0x01, 0x00 },
 		{ 0x48, 1, 0x08, 0x00 }
 	};
-	u8 udma;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	/* Hack from drivers/ide/pci. Really we want to know how to do the
-	   raw detection not play follow the bios mode guess */
-	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
-	if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -60,6 +52,19 @@ static void atiixp_error_handler(struct ata_port *ap)
 	ata_bmdma_drive_eh(ap, atiixp_pre_reset, ata_std_softreset, NULL,   ata_std_postreset);
 }
 
+static int atiixp_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 udma;
+
+	/* Hack from drivers/ide/pci. Really we want to know how to do the
+	   raw detection not play follow the bios mode guess */
+	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
+	if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
+		return  ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
+}
+
 /**
  *	atiixp_set_pio_timing	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -245,6 +250,7 @@ static struct ata_port_operations atiixp_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= atiixp_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= atiixp_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= atiixp_bmdma_start,

From 6bfed3fb035b4eff59160c2da5e3fbb69d6b0531 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 19:33:29 +0000
Subject: [PATCH 25/86] pata_efar: support ->cable_detect

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_efar.c | 31 ++++++++++++++++++++++---------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index dac7a6554f6c..a3216850bba1 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,10 +22,10 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_efar"
-#define DRV_VERSION	"0.4.3"
+#define DRV_VERSION	"0.4.4"
 
 /**
- *	efar_pre_reset	-	check for 40/80 pin
+ *	efar_pre_reset	-	Enable bits
  *	@ap: Port
  *
  *	Perform cable detection for the EFAR ATA interface. This is
@@ -38,18 +38,11 @@ static int efar_pre_reset(struct ata_port *ap)
 		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
 		{ 0x43U, 1U, 0x80UL, 0x80UL },	/* port 1 */
 	};
-
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
 
 	if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	pci_read_config_byte(pdev, 0x47, &tmp);
-	if (tmp & (2 >> ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
 	return ata_std_prereset(ap);
 }
 
@@ -66,6 +59,25 @@ static void efar_error_handler(struct ata_port *ap)
 	ata_bmdma_drive_eh(ap, efar_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
 }
 
+/**
+ *	efar_cable_detect	-	check for 40/80 pin
+ *	@ap: Port
+ *
+ *	Perform cable detection for the EFAR ATA interface. This is
+ *	different to the PIIX arrangement
+ */
+
+static int efar_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
+
+	pci_read_config_byte(pdev, 0x47, &tmp);
+	if (tmp & (2 >> ap->port_no))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
 /**
  *	efar_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
@@ -256,6 +268,7 @@ static const struct ata_port_operations efar_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= efar_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= efar_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,

From fecfda5d88dcc3775f72d6f3a55d11b77c67f878 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 19:34:28 +0000
Subject: [PATCH 26/86] pata_hpt366: support ->cable_detect

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_hpt366.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index baf35f876030..e9ad4eba0670 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt366"
-#define DRV_VERSION	"0.6.0"
+#define DRV_VERSION	"0.6.1"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -210,24 +210,28 @@ static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
 	return 0xffffffffU;	/* silence compiler warning */
 }
 
+static int hpt36x_cable_detect(struct ata_port *ap)
+{
+	u8 ata66;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	pci_read_config_byte(pdev, 0x5A, &ata66);
+	if (ata66 & (1 << ap->port_no))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
 static int hpt36x_pre_reset(struct ata_port *ap)
 {
 	static const struct pci_bits hpt36x_enable_bits[] = {
 		{ 0x50, 1, 0x04, 0x04 },
 		{ 0x54, 1, 0x04, 0x04 }
 	};
-
-	u8 ata66;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	pci_read_config_byte(pdev, 0x5A, &ata66);
-	if (ata66 & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
 	return ata_std_prereset(ap);
 }
 
@@ -354,6 +358,7 @@ static struct ata_port_operations hpt366_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= hpt36x_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= hpt36x_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,

From a73984a0d5664fa1bfdd9f0a475b8d74af7f44a6 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Fri, 9 Mar 2007 08:37:46 -0500
Subject: [PATCH 27/86] [libata] More PATA driver ->cable_detect support

Roll-up of ->cable_detect feature addition patches, authored and
signed-off-by Alan Cox.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_artop.c     | 26 ++++++++++++++++++--------
 drivers/ata/pata_cmd64x.c    | 34 +++++++++-------------------------
 drivers/ata/pata_cs5520.c    | 15 ++-------------
 drivers/ata/pata_cs5530.c    | 15 ++-------------
 drivers/ata/pata_hpt3x3.c    | 22 ++--------------------
 drivers/ata/pata_isapnp.c    |  1 +
 drivers/ata/pata_ixp4xx_cf.c |  1 +
 drivers/ata/pata_legacy.c    |  7 +++++++
 8 files changed, 42 insertions(+), 79 deletions(-)

diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 21c30282717c..00e9ec342db0 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -49,8 +49,6 @@ static int artop6210_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -85,18 +83,28 @@ static int artop6260_pre_reset(struct ata_port *ap)
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
 
 	/* Odd numbered device ids are the units with enable bits (the -R cards) */
 	if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
+	return ata_std_prereset(ap);
+}
 
+/**
+ *	artop6260_cable_detect	-	identify cable type
+ *	@ap: Port
+ *
+ *	Identify the cable type for the ARTOp interface in question
+ */
+ 
+static int artop6260_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
 	pci_read_config_byte(pdev, 0x49, &tmp);
 	if (tmp & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
 /**
@@ -225,7 +233,7 @@ static void artop6260_set_piomode(struct ata_port *ap, struct ata_device *adev)
 /**
  *	artop6210_set_dmamode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device whose timings we are configuring
  *
  *	Set DMA mode for device, in host controller PCI config space.
  *
@@ -333,6 +341,7 @@ static const struct ata_port_operations artop6210_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6210_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -366,6 +375,7 @@ static const struct ata_port_operations artop6260_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6260_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= artop6260_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 5b13bdd1edc0..3989cc577fcd 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -75,13 +75,7 @@ enum {
 	DTPR1		= 0x7C
 };
 
-static int cmd64x_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static int cmd648_pre_reset(struct ata_port *ap)
+static int cmd648_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u8 r;
@@ -89,21 +83,8 @@ static int cmd648_pre_reset(struct ata_port *ap)
 	/* Check cable detect bits */
 	pci_read_config_byte(pdev, BMIDECSR, &r);
 	if (r & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
-
-	return ata_std_prereset(ap);
-}
-
-static void cmd64x_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static void cmd648_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+		return ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
 }
 
 /**
@@ -304,8 +285,9 @@ static struct ata_port_operations cmd64x_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cmd64x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -338,8 +320,9 @@ static struct ata_port_operations cmd646r1_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cmd64x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -372,8 +355,9 @@ static struct ata_port_operations cmd648_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cmd648_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= cmd648_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 55cc293e7487..b5b27baa0be1 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -139,18 +139,6 @@ static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	cs5520_set_timings(ap, adev, adev->pio_mode);
 }
 
-
-static int cs5520_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static void cs5520_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, cs5520_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 static struct scsi_host_template cs5520_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -186,8 +174,9 @@ static struct ata_port_operations cs5520_port_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= cs5520_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index db63e80e608b..29642d5ee189 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -160,18 +160,6 @@ static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
 	return ata_qc_issue_prot(qc);
 }
 
-static int cs5530_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static void cs5530_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, cs5530_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
 static struct scsi_host_template cs5530_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -213,8 +201,9 @@ static struct ata_port_operations cs5530_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cs5530_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= cs5530_qc_issue_prot,
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 813485c8526c..ac28ec8c50aa 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -25,25 +25,6 @@
 #define DRV_NAME	"pata_hpt3x3"
 #define DRV_VERSION	"0.4.2"
 
-static int hpt3x3_probe_init(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	hpt3x3_probe_reset	-	reset the hpt3x3 bus
- *	@ap: ATA port to reset
- *
- *	Perform the housekeeping when doing an ATA bus reeset. We just
- *	need to force the cable type.
- */
-
-static void hpt3x3_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, hpt3x3_probe_init, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	hpt3x3_set_piomode		-	PIO setup
  *	@ap: ATA interface
@@ -139,8 +120,9 @@ static struct ata_port_operations hpt3x3_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= hpt3x3_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 1a61cc891741..2580ab3146bf 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -49,6 +49,7 @@ static struct ata_port_operations isapnp_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index c6f0e1927551..8257af84ff7c 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -129,6 +129,7 @@ static struct ata_port_operations ixp4xx_port_ops = {
 	.qc_issue	= ata_qc_issue_prot,
 	.eng_timeout	= ata_eng_timeout,
 	.data_xfer	= ixp4xx_mmio_data_xfer,
+	.cable_detect	= ata_cable_40wire,
 
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ixp4xx_irq_clear,
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 86fbcd6a742b..0b1749a84df2 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -162,6 +162,7 @@ static struct ata_port_operations simple_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -185,6 +186,7 @@ static struct ata_port_operations legacy_port_ops = {
 	.check_status 	= ata_check_status,
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,
+	.cable_detect	= ata_cable_40wire,
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
@@ -305,6 +307,7 @@ static struct ata_port_operations pdc20230_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -360,6 +363,7 @@ static struct ata_port_operations ht6560a_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -426,6 +430,7 @@ static struct ata_port_operations ht6560b_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -547,6 +552,7 @@ static struct ata_port_operations opti82c611a_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -680,6 +686,7 @@ static struct ata_port_operations opti82c46x_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= opti82c46x_qc_issue_prot,

From ec04b075843d12b5115267415d0426b48e672136 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Fri, 9 Mar 2007 19:45:58 +0900
Subject: [PATCH 28/86] iomap: implement pcim_iounmap_regions()

Implement pcim_iounmap_regions() - the opposite of
pcim_iomap_regions().

Signed-off-by: Tejun heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 include/linux/pci.h |  1 +
 lib/devres.c        | 26 ++++++++++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/include/linux/pci.h b/include/linux/pci.h
index a3ad76221c6f..972491089ac9 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -838,6 +838,7 @@ void __iomem * pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen);
 void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr);
 void __iomem * const * pcim_iomap_table(struct pci_dev *pdev);
 int pcim_iomap_regions(struct pci_dev *pdev, u16 mask, const char *name);
+void pcim_iounmap_regions(struct pci_dev *pdev, u16 mask);
 
 extern int pci_pci_problems;
 #define PCIPCI_FAIL		1	/* No PCI PCI DMA */
diff --git a/lib/devres.c b/lib/devres.c
index eb38849aa717..b1d336ce7f3d 100644
--- a/lib/devres.c
+++ b/lib/devres.c
@@ -296,5 +296,31 @@ int pcim_iomap_regions(struct pci_dev *pdev, u16 mask, const char *name)
 	return rc;
 }
 EXPORT_SYMBOL(pcim_iomap_regions);
+
+/**
+ * pcim_iounmap_regions - Unmap and release PCI BARs
+ * @pdev: PCI device to map IO resources for
+ * @mask: Mask of BARs to unmap and release
+ *
+ * Unamp and release regions specified by @mask.
+ */
+void pcim_iounmap_regions(struct pci_dev *pdev, u16 mask)
+{
+	void __iomem * const *iomap;
+	int i;
+
+	iomap = pcim_iomap_table(pdev);
+	if (!iomap)
+		return;
+
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		if (!(mask & (1 << i)))
+			continue;
+
+		pcim_iounmap(pdev, iomap[i]);
+		pci_release_region(pdev, i);
+	}
+}
+EXPORT_SYMBOL(pcim_iounmap_regions);
 #endif
 #endif

From fcc2f69a6fad1543b466db9c35aa5a2f364eb3d4 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 23:28:52 +0000
Subject: [PATCH 29/86] pata_hpt37x: Updates from drivers/ide work

Drag pata_hpt37x kicking and screaming in the direction of
drivers/ide/pci/hpt366.c and all the work that Sergei has been doing
there. Plenty left to be done but this is a good snapshot for folks to
work on and to review

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_hpt37x.c | 346 +++++++++++++++-----------------------
 1 file changed, 140 insertions(+), 206 deletions(-)

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index f331eeeafa0f..12f387f37771 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -8,6 +8,7 @@
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
+ * Portions Copyright (C) 2005-2006	MontaVista Software, Inc.
  *
  * TODO
  *	PLL mode
@@ -25,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.6.0"
+#define DRV_VERSION	"0.6.4"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -61,201 +62,75 @@ struct hpt_chip {
  * 31     FIFO enable.
  */
 
-/* from highpoint documentation. these are old values */
-static const struct hpt_clock hpt370_timings_33[] = {
-/*	{	XFER_UDMA_5,	0x1A85F442,	0x16454e31	}, */
-	{	XFER_UDMA_5,	0x16454e31	},
-	{	XFER_UDMA_4,	0x16454e31	},
-	{	XFER_UDMA_3,	0x166d4e31	},
-	{	XFER_UDMA_2,	0x16494e31	},
-	{	XFER_UDMA_1,	0x164d4e31	},
-	{	XFER_UDMA_0,	0x16514e31	},
+static struct hpt_clock hpt37x_timings_33[] = {
+	{ XFER_UDMA_6,		0x12446231 },	/* 0x12646231 ?? */
+	{ XFER_UDMA_5,		0x12446231 },
+	{ XFER_UDMA_4,		0x12446231 },
+	{ XFER_UDMA_3,		0x126c6231 },
+	{ XFER_UDMA_2,		0x12486231 },
+	{ XFER_UDMA_1,		0x124c6233 },
+	{ XFER_UDMA_0,		0x12506297 },
 
-	{	XFER_MW_DMA_2,	0x26514e21	},
-	{	XFER_MW_DMA_1,	0x26514e33	},
-	{	XFER_MW_DMA_0,	0x26514e97	},
+	{ XFER_MW_DMA_2,	0x22406c31 },
+	{ XFER_MW_DMA_1,	0x22406c33 },
+	{ XFER_MW_DMA_0,	0x22406c97 },
 
-	{	XFER_PIO_4,	0x06514e21	},
-	{	XFER_PIO_3,	0x06514e22	},
-	{	XFER_PIO_2,	0x06514e33	},
-	{	XFER_PIO_1,	0x06914e43	},
-	{	XFER_PIO_0,	0x06914e57	},
-	{	0,		0x06514e57	}
+	{ XFER_PIO_4,		0x06414e31 },
+	{ XFER_PIO_3,		0x06414e42 },
+	{ XFER_PIO_2,		0x06414e53 },
+	{ XFER_PIO_1,		0x06814e93 },
+	{ XFER_PIO_0,		0x06814ea7 }
 };
 
-static const struct hpt_clock hpt370_timings_66[] = {
-	{	XFER_UDMA_5,	0x14846231	},
-	{	XFER_UDMA_4,	0x14886231	},
-	{	XFER_UDMA_3,	0x148c6231	},
-	{	XFER_UDMA_2,	0x148c6231	},
-	{	XFER_UDMA_1,	0x14906231	},
-	{	XFER_UDMA_0,	0x14986231	},
+static struct hpt_clock hpt37x_timings_50[] = {
+	{ XFER_UDMA_6,		0x12848242 },
+	{ XFER_UDMA_5,		0x12848242 },
+	{ XFER_UDMA_4,		0x12ac8242 },
+	{ XFER_UDMA_3,		0x128c8242 },
+	{ XFER_UDMA_2,		0x120c8242 },
+	{ XFER_UDMA_1,		0x12148254 },
+	{ XFER_UDMA_0,		0x121882ea },
 
-	{	XFER_MW_DMA_2,	0x26514e21	},
-	{	XFER_MW_DMA_1,	0x26514e33	},
-	{	XFER_MW_DMA_0,	0x26514e97	},
+	{ XFER_MW_DMA_2,	0x22808242 },
+	{ XFER_MW_DMA_1,	0x22808254 },
+	{ XFER_MW_DMA_0,	0x228082ea },
 
-	{	XFER_PIO_4,	0x06514e21	},
-	{	XFER_PIO_3,	0x06514e22	},
-	{	XFER_PIO_2,	0x06514e33	},
-	{	XFER_PIO_1,	0x06914e43	},
-	{	XFER_PIO_0,	0x06914e57	},
-	{	0,		0x06514e57	}
+	{ XFER_PIO_4,		0x0a81f442 },
+	{ XFER_PIO_3,		0x0a81f443 },
+	{ XFER_PIO_2,		0x0a81f454 },
+	{ XFER_PIO_1,		0x0ac1f465 },
+	{ XFER_PIO_0,		0x0ac1f48a }
 };
 
-/* these are the current (4 sep 2001) timings from highpoint */
-static const struct hpt_clock hpt370a_timings_33[] = {
-	{	XFER_UDMA_5,	0x12446231	},
-	{	XFER_UDMA_4,	0x12446231	},
-	{	XFER_UDMA_3,	0x126c6231	},
-	{	XFER_UDMA_2,	0x12486231	},
-	{	XFER_UDMA_1,	0x124c6233	},
-	{	XFER_UDMA_0,	0x12506297	},
+static struct hpt_clock hpt37x_timings_66[] = {
+	{ XFER_UDMA_6,		0x1c869c62 },
+	{ XFER_UDMA_5,		0x1cae9c62 },	/* 0x1c8a9c62 */
+	{ XFER_UDMA_4,		0x1c8a9c62 },
+	{ XFER_UDMA_3,		0x1c8e9c62 },
+	{ XFER_UDMA_2,		0x1c929c62 },
+	{ XFER_UDMA_1,		0x1c9a9c62 },
+	{ XFER_UDMA_0,		0x1c829c62 },
 
-	{	XFER_MW_DMA_2,	0x22406c31	},
-	{	XFER_MW_DMA_1,	0x22406c33	},
-	{	XFER_MW_DMA_0,	0x22406c97	},
+	{ XFER_MW_DMA_2,	0x2c829c62 },
+	{ XFER_MW_DMA_1,	0x2c829c66 },
+	{ XFER_MW_DMA_0,	0x2c829d2e },
 
-	{	XFER_PIO_4,	0x06414e31	},
-	{	XFER_PIO_3,	0x06414e42	},
-	{	XFER_PIO_2,	0x06414e53	},
-	{	XFER_PIO_1,	0x06814e93	},
-	{	XFER_PIO_0,	0x06814ea7	},
-	{	0,		0x06814ea7	}
+	{ XFER_PIO_4,		0x0c829c62 },
+	{ XFER_PIO_3,		0x0c829c84 },
+	{ XFER_PIO_2,		0x0c829ca6 },
+	{ XFER_PIO_1,		0x0d029d26 },
+	{ XFER_PIO_0,		0x0d029d5e }
 };
 
-/* 2x 33MHz timings */
-static const struct hpt_clock hpt370a_timings_66[] = {
-	{	XFER_UDMA_5,	0x1488e673	},
-	{	XFER_UDMA_4,	0x1488e673	},
-	{	XFER_UDMA_3,	0x1498e673	},
-	{	XFER_UDMA_2,	0x1490e673	},
-	{	XFER_UDMA_1,	0x1498e677	},
-	{	XFER_UDMA_0,	0x14a0e73f	},
-
-	{	XFER_MW_DMA_2,	0x2480fa73	},
-	{	XFER_MW_DMA_1,	0x2480fa77	},
-	{	XFER_MW_DMA_0,	0x2480fb3f	},
-
-	{	XFER_PIO_4,	0x0c82be73	},
-	{	XFER_PIO_3,	0x0c82be95	},
-	{	XFER_PIO_2,	0x0c82beb7	},
-	{	XFER_PIO_1,	0x0d02bf37	},
-	{	XFER_PIO_0,	0x0d02bf5f	},
-	{	0,		0x0d02bf5f	}
-};
-
-static const struct hpt_clock hpt370a_timings_50[] = {
-	{	XFER_UDMA_5,	0x12848242	},
-	{	XFER_UDMA_4,	0x12ac8242	},
-	{	XFER_UDMA_3,	0x128c8242	},
-	{	XFER_UDMA_2,	0x120c8242	},
-	{	XFER_UDMA_1,	0x12148254	},
-	{	XFER_UDMA_0,	0x121882ea	},
-
-	{	XFER_MW_DMA_2,	0x22808242	},
-	{	XFER_MW_DMA_1,	0x22808254	},
-	{	XFER_MW_DMA_0,	0x228082ea	},
-
-	{	XFER_PIO_4,	0x0a81f442	},
-	{	XFER_PIO_3,	0x0a81f443	},
-	{	XFER_PIO_2,	0x0a81f454	},
-	{	XFER_PIO_1,	0x0ac1f465	},
-	{	XFER_PIO_0,	0x0ac1f48a	},
-	{	0,		0x0ac1f48a	}
-};
-
-static const struct hpt_clock hpt372_timings_33[] = {
-	{	XFER_UDMA_6,	0x1c81dc62	},
-	{	XFER_UDMA_5,	0x1c6ddc62	},
-	{	XFER_UDMA_4,	0x1c8ddc62	},
-	{	XFER_UDMA_3,	0x1c8edc62	},	/* checkme */
-	{	XFER_UDMA_2,	0x1c91dc62	},
-	{	XFER_UDMA_1,	0x1c9adc62	},	/* checkme */
-	{	XFER_UDMA_0,	0x1c82dc62	},	/* checkme */
-
-	{	XFER_MW_DMA_2,	0x2c829262	},
-	{	XFER_MW_DMA_1,	0x2c829266	},	/* checkme */
-	{	XFER_MW_DMA_0,	0x2c82922e	},	/* checkme */
-
-	{	XFER_PIO_4,	0x0c829c62	},
-	{	XFER_PIO_3,	0x0c829c84	},
-	{	XFER_PIO_2,	0x0c829ca6	},
-	{	XFER_PIO_1,	0x0d029d26	},
-	{	XFER_PIO_0,	0x0d029d5e	},
-	{	0,		0x0d029d5e	}
-};
-
-static const struct hpt_clock hpt372_timings_50[] = {
-	{	XFER_UDMA_5,	0x12848242	},
-	{	XFER_UDMA_4,	0x12ac8242	},
-	{	XFER_UDMA_3,	0x128c8242	},
-	{	XFER_UDMA_2,	0x120c8242	},
-	{	XFER_UDMA_1,	0x12148254	},
-	{	XFER_UDMA_0,	0x121882ea	},
-
-	{	XFER_MW_DMA_2,	0x22808242	},
-	{	XFER_MW_DMA_1,	0x22808254	},
-	{	XFER_MW_DMA_0,	0x228082ea	},
-
-	{	XFER_PIO_4,	0x0a81f442	},
-	{	XFER_PIO_3,	0x0a81f443	},
-	{	XFER_PIO_2,	0x0a81f454	},
-	{	XFER_PIO_1,	0x0ac1f465	},
-	{	XFER_PIO_0,	0x0ac1f48a	},
-	{	0,		0x0a81f443	}
-};
-
-static const struct hpt_clock hpt372_timings_66[] = {
-	{	XFER_UDMA_6,	0x1c869c62	},
-	{	XFER_UDMA_5,	0x1cae9c62	},
-	{	XFER_UDMA_4,	0x1c8a9c62	},
-	{	XFER_UDMA_3,	0x1c8e9c62	},
-	{	XFER_UDMA_2,	0x1c929c62	},
-	{	XFER_UDMA_1,	0x1c9a9c62	},
-	{	XFER_UDMA_0,	0x1c829c62	},
-
-	{	XFER_MW_DMA_2,	0x2c829c62	},
-	{	XFER_MW_DMA_1,	0x2c829c66	},
-	{	XFER_MW_DMA_0,	0x2c829d2e	},
-
-	{	XFER_PIO_4,	0x0c829c62	},
-	{	XFER_PIO_3,	0x0c829c84	},
-	{	XFER_PIO_2,	0x0c829ca6	},
-	{	XFER_PIO_1,	0x0d029d26	},
-	{	XFER_PIO_0,	0x0d029d5e	},
-	{	0,		0x0d029d26	}
-};
-
-static const struct hpt_clock hpt374_timings_33[] = {
-	{	XFER_UDMA_6,	0x12808242	},
-	{	XFER_UDMA_5,	0x12848242	},
-	{	XFER_UDMA_4,	0x12ac8242	},
-	{	XFER_UDMA_3,	0x128c8242	},
-	{	XFER_UDMA_2,	0x120c8242	},
-	{	XFER_UDMA_1,	0x12148254	},
-	{	XFER_UDMA_0,	0x121882ea	},
-
-	{	XFER_MW_DMA_2,	0x22808242	},
-	{	XFER_MW_DMA_1,	0x22808254	},
-	{	XFER_MW_DMA_0,	0x228082ea	},
-
-	{	XFER_PIO_4,	0x0a81f442	},
-	{	XFER_PIO_3,	0x0a81f443	},
-	{	XFER_PIO_2,	0x0a81f454	},
-	{	XFER_PIO_1,	0x0ac1f465	},
-	{	XFER_PIO_0,	0x0ac1f48a	},
-	{	0,		0x06814e93	}
-};
 
 static const struct hpt_chip hpt370 = {
 	"HPT370",
 	48,
 	{
-		hpt370_timings_33,
+		hpt37x_timings_33,
 		NULL,
 		NULL,
-		hpt370_timings_66
+		hpt37x_timings_66
 	}
 };
 
@@ -263,10 +138,10 @@ static const struct hpt_chip hpt370a = {
 	"HPT370A",
 	48,
 	{
-		hpt370a_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt370a_timings_50,
-		hpt370a_timings_66
+		hpt37x_timings_50,
+		hpt37x_timings_66
 	}
 };
 
@@ -274,10 +149,10 @@ static const struct hpt_chip hpt372 = {
 	"HPT372",
 	55,
 	{
-		hpt372_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt372_timings_50,
-		hpt372_timings_66
+		hpt37x_timings_50,
+		hpt37x_timings_66
 	}
 };
 
@@ -285,10 +160,10 @@ static const struct hpt_chip hpt302 = {
 	"HPT302",
 	66,
 	{
-		hpt372_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt372_timings_50,
-		hpt372_timings_66
+		hpt37x_timings_50,
+		hpt37x_timings_66
 	}
 };
 
@@ -296,10 +171,10 @@ static const struct hpt_chip hpt371 = {
 	"HPT371",
 	66,
 	{
-		hpt372_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt372_timings_50,
-		hpt372_timings_66
+		hpt37x_timings_50,
+		hpt37x_timings_66
 	}
 };
 
@@ -307,10 +182,10 @@ static const struct hpt_chip hpt372a = {
 	"HPT372A",
 	66,
 	{
-		hpt372_timings_33,
+		hpt37x_timings_33,
 		NULL,
-		hpt372_timings_50,
-		hpt372_timings_66
+		hpt37x_timings_50,
+		hpt37x_timings_66
 	}
 };
 
@@ -318,7 +193,7 @@ static const struct hpt_chip hpt374 = {
 	"HPT374",
 	48,
 	{
-		hpt374_timings_33,
+		hpt37x_timings_33,
 		NULL,
 		NULL,
 		NULL
@@ -462,8 +337,7 @@ static int hpt37x_pre_reset(struct ata_port *ap)
 		ap->cbl = ATA_CBL_PATA80;
 
 	/* Reset the state machine */
-	pci_write_config_byte(pdev, 0x50, 0x37);
-	pci_write_config_byte(pdev, 0x54, 0x37);
+	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
 
 	return ata_std_prereset(ap);
@@ -513,8 +387,7 @@ static int hpt374_pre_reset(struct ata_port *ap)
 		ap->cbl = ATA_CBL_PATA80;
 
 	/* Reset the state machine */
-	pci_write_config_byte(pdev, 0x50, 0x37);
-	pci_write_config_byte(pdev, 0x54, 0x37);
+	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
 
 	return ata_std_prereset(ap);
@@ -1032,6 +905,24 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.udma_mask = 0x3f,
 		.port_ops = &hpt370a_port_ops
 	};
+	/* HPT370 - UDMA100 */
+	static struct ata_port_info info_hpt370_33 = {
+		.sht = &hpt37x_sht,
+		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x0f,
+		.port_ops = &hpt370_port_ops
+	};
+	/* HPT370A - UDMA100 */
+	static struct ata_port_info info_hpt370a_33 = {
+		.sht = &hpt37x_sht,
+		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = 0x0f,
+		.port_ops = &hpt370a_port_ops
+	};
 	/* HPT371, 372 and friends - UDMA133 */
 	static struct ata_port_info info_hpt372 = {
 		.sht = &hpt37x_sht,
@@ -1067,7 +958,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
 	u8 irqmask;
 	u32 class_rev;
+	u8 mcr1;
 	u32 freq;
+	int prefer_dpll = 1;
+	
+	unsigned long iobase = pci_resource_start(dev, 4);
 
 	const struct hpt_chip *chip_table;
 	int clock_slot;
@@ -1088,10 +983,12 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			case 3:
 				port = &info_hpt370;
 				chip_table = &hpt370;
+				prefer_dpll = 0;
 				break;
 			case 4:
 				port = &info_hpt370a;
 				chip_table = &hpt370a;
+				prefer_dpll = 0;
 				break;
 			case 5:
 				port = &info_hpt372;
@@ -1119,8 +1016,16 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 				chip_table = &hpt302;
 				break;
 			case PCI_DEVICE_ID_TTI_HPT371:
+				if (class_rev > 1)
+					return -ENODEV;
 				port = &info_hpt372;
 				chip_table = &hpt371;
+				/* Single channel device, paster is not present
+				   but the NIOS (or us for non x86) must mark it
+				   absent */
+				pci_read_config_byte(dev, 0x50, &mcr1);
+				mcr1 &= ~0x04;
+				pci_write_config_byte(dev, 0x50, mcr1);
 				break;
 			case PCI_DEVICE_ID_TTI_HPT374:
 				chip_table = &hpt374;
@@ -1150,8 +1055,18 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	 */
 
 	pci_write_config_byte(dev, 0x5b, 0x23);
+	
+	/*
+	 * HighPoint does this for HPT372A.
+	 * NOTE: This register is only writeable via I/O space.
+	 */
+	if (chip_table == &hpt372a)
+		outb(0x0e, iobase + 0x9c);
 
-	pci_read_config_dword(dev, 0x70, &freq);
+	/* Some devices do not let this value be accessed via PCI space
+	   according to the old driver */
+
+	freq = inl(iobase + 0x90);
 	if ((freq >> 12) != 0xABCDE) {
 		int i;
 		u8 sr;
@@ -1162,7 +1077,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		/* This is the process the HPT371 BIOS is reported to use */
 		for(i = 0; i < 128; i++) {
 			pci_read_config_byte(dev, 0x78, &sr);
-			total += sr;
+			total += sr & 0x1FF;
 			udelay(15);
 		}
 		freq = total / 128;
@@ -1173,15 +1088,27 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	 *	Turn the frequency check into a band and then find a timing
 	 *	table to match it.
 	 */
-
+	 
 	clock_slot = hpt37x_clock_slot(freq, chip_table->base);
-	if (chip_table->clocks[clock_slot] == NULL) {
+	if (chip_table->clocks[clock_slot] == NULL || prefer_dpll) {
 		/*
 		 *	We need to try PLL mode instead
+		 *
+		 *	For non UDMA133 capable devices we should
+		 *	use a 50MHz DPLL by choice
 		 */
-		unsigned int f_low = (MHz[clock_slot] * chip_table->base) / 192;
-		unsigned int f_high = f_low + 2;
+		unsigned int f_low, f_high;
 		int adjust;
+		
+		clock_slot = 2;
+		if (port->udma_mask & 0xE0)
+			clock_slot = 3;
+		
+		f_low = (MHz[clock_slot] * chip_table->base) / 192;
+		f_high = f_low + 2;
+
+		/* Select the DPLL clock. */
+		pci_write_config_byte(dev, 0x5b, 0x21);
 
 		for(adjust = 0; adjust < 8; adjust++) {
 			if (hpt37x_calibrate_dpll(dev))
@@ -1197,15 +1124,17 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n");
 			return -ENODEV;
 		}
-		/* Check if this works for all cases */
-		port->private_data = (void *)hpt370_timings_66;
+		if (clock_slot == 3)
+			port->private_data = (void *)hpt37x_timings_66;
+		else
+			port->private_data = (void *)hpt37x_timings_50;
 
 		printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]);
 	} else {
 		port->private_data = (void *)chip_table->clocks[clock_slot];
 		/*
 		 *	Perform a final fixup. The 371 and 372 clock determines
-		 *	if UDMA133 is available.
+		 *	if UDMA133 is available. (FIXME: should we use DPLL then ?)
 		 */
 
 		if (clock_slot == 2 && chip_table == &hpt372) {	/* 50Mhz */
@@ -1214,8 +1143,13 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 				port = &info_hpt372_50;
 			else BUG();
 		}
+		if (clock_slot < 2 && port == &info_hpt370)
+			port = &info_hpt370_33;
+		if (clock_slot < 2 && port == &info_hpt370a)
+			port = &info_hpt370a_33;
 		printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]);
 	}
+
 	port_info[0] = port_info[1] = port;
 	/* Now kick off ATA set up */
 	return ata_pci_init_one(dev, port_info, 2);

From 04351821b43e6c0c91ad50d7e4be54a935f749e1 Mon Sep 17 00:00:00 2001
From: Alan <alan@lxorguk.ukuu.org.uk>
Date: Tue, 6 Mar 2007 02:37:52 -0800
Subject: [PATCH 30/86] pata: expose set_mode method so it can be wrapped

This splits set_mode into do_set_mode and the wrapper so that a driver can
call the standard method inside its own.  This in theory also obsoletes
->post_set_mode().

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 37 ++++++++++++++++++++++++++++++-------
 include/linux/libata.h    |  1 +
 2 files changed, 31 insertions(+), 7 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 89a77e1793fa..14b469f7b23e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2519,12 +2519,13 @@ static int ata_dev_set_mode(struct ata_device *dev)
 }
 
 /**
- *	ata_set_mode - Program timings and issue SET FEATURES - XFER
+ *	ata_do_set_mode - Program timings and issue SET FEATURES - XFER
  *	@ap: port on which timings will be programmed
  *	@r_failed_dev: out paramter for failed device
  *
- *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
- *	ata_set_mode() fails, pointer to the failing device is
+ *	Standard implementation of the function used to tune and set
+ *	ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
+ *	ata_dev_set_mode() fails, pointer to the failing device is
  *	returned in @r_failed_dev.
  *
  *	LOCKING:
@@ -2533,14 +2534,12 @@ static int ata_dev_set_mode(struct ata_device *dev)
  *	RETURNS:
  *	0 on success, negative errno otherwise
  */
-int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+
+int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
 {
 	struct ata_device *dev;
 	int i, rc = 0, used_dma = 0, found = 0;
 
-	/* has private set_mode? */
-	if (ap->ops->set_mode)
-		return ap->ops->set_mode(ap, r_failed_dev);
 
 	/* step 1: calculate xfer_mask */
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
@@ -2624,6 +2623,29 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
 	return rc;
 }
 
+/**
+ *	ata_set_mode - Program timings and issue SET FEATURES - XFER
+ *	@ap: port on which timings will be programmed
+ *	@r_failed_dev: out paramter for failed device
+ *
+ *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).  If
+ *	ata_set_mode() fails, pointer to the failing device is
+ *	returned in @r_failed_dev.
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ *	RETURNS:
+ *	0 on success, negative errno otherwise
+ */
+int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+{
+	/* has private set_mode? */
+	if (ap->ops->set_mode)
+		return ap->ops->set_mode(ap, r_failed_dev);
+	return ata_do_set_mode(ap, r_failed_dev);
+}
+
 /**
  *	ata_tf_to_host - issue ATA taskfile to host controller
  *	@ap: port to which command is being issued
@@ -6413,6 +6435,7 @@ EXPORT_SYMBOL_GPL(ata_altstatus);
 EXPORT_SYMBOL_GPL(ata_exec_command);
 EXPORT_SYMBOL_GPL(ata_port_start);
 EXPORT_SYMBOL_GPL(ata_interrupt);
+EXPORT_SYMBOL_GPL(ata_do_set_mode);
 EXPORT_SYMBOL_GPL(ata_data_xfer);
 EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
 EXPORT_SYMBOL_GPL(ata_qc_prep);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3451ef97a931..c145d9df04d0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -831,6 +831,7 @@ extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
 extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
 				       int queue_depth);
 extern struct ata_device *ata_dev_pair(struct ata_device *adev);
+extern int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
 extern u8 ata_irq_on(struct ata_port *ap);
 extern u8 ata_dummy_irq_on(struct ata_port *ap);
 extern u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq);

From 432729f0b0c299ae9731aaa31beaa0dd3a9751eb Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 23:22:59 +0000
Subject: [PATCH 31/86] libata-core: Fix the iordy methods

This alone isn't sufficient to save the universe from prehistoric disks
and controllers but it is a first important step. Split off a separate
function to provide a mode filter when controller iordy is not available.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 36 +++++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 14b469f7b23e..d01bb5d50fcc 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1379,30 +1379,44 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
  *	Check if the current speed of the device requires IORDY. Used
  *	by various controllers for chip configuration.
  */
-
+ 
 unsigned int ata_pio_need_iordy(const struct ata_device *adev)
 {
-	int pio;
-	int speed = adev->pio_mode - XFER_PIO_0;
-
-	if (speed < 2)
+	/* Controller doesn't support  IORDY. Probably a pointless check
+	   as the caller should know this */
+	if (adev->ap->flags & ATA_FLAG_NO_IORDY)
 		return 0;
-	if (speed > 2)
+	/* PIO3 and higher it is mandatory */
+	if (adev->pio_mode > XFER_PIO_2)
 		return 1;
+	/* We turn it on when possible */
+	if (ata_id_has_iordy(adev->id))
+		return 1;
+	return 0;
+}
 
+/**
+ *	ata_pio_mask_no_iordy	-	Return the non IORDY mask
+ *	@adev: ATA device
+ *
+ *	Compute the highest mode possible if we are not using iordy. Return
+ *	-1 if no iordy mode is available.
+ */
+ 
+static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
+{
 	/* If we have no drive specific rule, then PIO 2 is non IORDY */
-
 	if (adev->id[ATA_ID_FIELD_VALID] & 2) {	/* EIDE */
-		pio = adev->id[ATA_ID_EIDE_PIO];
+		u16 pio = adev->id[ATA_ID_EIDE_PIO];
 		/* Is the speed faster than the drive allows non IORDY ? */
 		if (pio) {
 			/* This is cycle times not frequency - watch the logic! */
 			if (pio > 240)	/* PIO2 is 240nS per cycle */
-				return 1;
-			return 0;
+				return 3 << ATA_SHIFT_PIO;
+			return 7 << ATA_SHIFT_PIO;
 		}
 	}
-	return 0;
+	return 3 << ATA_SHIFT_PIO;
 }
 
 /**

From 9d2c7c75f889a3eefad016c71f651b0796e0a6e9 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 8 Mar 2007 23:09:12 +0000
Subject: [PATCH 32/86] sata_sil: First step to removing ->post_set_mode

Now that we have ata_do_set_mode() available for drivers to use we don't
actually need ->post_set_mode() as the driver can wrap set_mode nicely
and do stuff before or after (eg PCMCIA needs before), so we can kill off
a method in all the structs

While I was at it I added kernel-doc to the function involved.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_sil.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 170d36e6260f..466b05b67115 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil"
-#define DRV_VERSION	"2.1"
+#define DRV_VERSION	"2.2"
 
 enum {
 	SIL_MMIO_BAR		= 5,
@@ -117,7 +117,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev);
 static void sil_dev_config(struct ata_device *dev);
 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
-static void sil_post_set_mode (struct ata_port *ap);
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed);
 static irqreturn_t sil_interrupt(int irq, void *dev_instance);
 static void sil_freeze(struct ata_port *ap);
 static void sil_thaw(struct ata_port *ap);
@@ -197,7 +197,7 @@ static const struct ata_port_operations sil_ops = {
 	.check_status		= ata_check_status,
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
-	.post_set_mode		= sil_post_set_mode,
+	.set_mode		= sil_set_mode,
 	.bmdma_setup            = ata_bmdma_setup,
 	.bmdma_start            = ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
@@ -297,7 +297,16 @@ static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
 	return cache_line;
 }
 
-static void sil_post_set_mode (struct ata_port *ap)
+/**
+ *	sil_set_mode		-	wrap set_mode functions
+ *	@ap: port to set up
+ *	@r_failed: returned device when we fail
+ *
+ *	Wrap the libata method for device setup as after the setup we need
+ *	to inspect the results and do some configuration work
+ */
+
+static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed)
 {
 	struct ata_host *host = ap->host;
 	struct ata_device *dev;
@@ -305,6 +314,11 @@ static void sil_post_set_mode (struct ata_port *ap)
 	void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode;
 	u32 tmp, dev_mode[2];
 	unsigned int i;
+	int rc;
+	
+	rc = ata_do_set_mode(ap, r_failed);
+	if (rc)
+		return rc;
 
 	for (i = 0; i < 2; i++) {
 		dev = &ap->device[i];
@@ -323,6 +337,7 @@ static void sil_post_set_mode (struct ata_port *ap)
 	tmp |= (dev_mode[1] << 4);
 	writel(tmp, addr);
 	readl(addr);	/* flush */
+	return 0;
 }
 
 static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg)

From a76b62ca70662cd0ca98edf366c6637009a95f7d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Fri, 9 Mar 2007 09:34:07 -0500
Subject: [PATCH 33/86] libata: Change prototype of mode_filter to remove
 ata_port*

With Tejun having added adev->ap some time ago we can get rid of the
almost unused port being passed to mode filters. And while we are
doing filters, lets turn on the !IORDY filter as well.

Signed-off-by: Alan Cox <alan@redhat.com>

With some hand massaging from
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c      |  2 +-
 drivers/ata/libata-sff.c       |  4 ++--
 drivers/ata/pata_ali.c         |  4 ++--
 drivers/ata/pata_hpt366.c      |  4 ++--
 drivers/ata/pata_hpt37x.c      | 10 ++++------
 drivers/ata/pata_serverworks.c | 14 +++++++-------
 include/linux/libata.h         |  4 ++--
 7 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d01bb5d50fcc..eaab6d925ef2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3545,7 +3545,7 @@ static void ata_dev_xfermask(struct ata_device *dev)
 	}
 
 	if (ap->ops->mode_filter)
-		xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask);
+		xfer_mask = ap->ops->mode_filter(dev, xfer_mask);
 
 	/* Apply cable rule here.  Don't apply it early because when
 	 * we handle hot plug the cable type can itself change.
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 2ffcca063d80..066689c5e509 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -893,12 +893,12 @@ int ata_pci_clear_simplex(struct pci_dev *pdev)
 	return 0;
 }
 
-unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask)
+unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
 {
 	/* Filter out DMA modes if the device has been configured by
 	   the BIOS as PIO only */
 
-	if (ap->ioaddr.bmdma_addr == 0)
+	if (adev->ap->ioaddr.bmdma_addr == 0)
 		xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
 	return xfer_mask;
 }
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 76243400c01d..047f636e258d 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -151,7 +151,7 @@ static void ali_early_error_handler(struct ata_port *ap)
  *	fix that later on. Also ensure we do not do UDMA on WDC drives
  */
 
-static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask)
 {
 	char model_num[ATA_ID_PROD_LEN + 1];
 	/* No DMA on anything but a disk for now */
@@ -160,7 +160,7 @@ static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device
 	ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
 	if (strstr(model_num, "WDC"))
 		return mask &= ~ATA_MASK_UDMA;
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 /**
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index e9ad4eba0670..c3e5ea35e0f8 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -175,7 +175,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons
  *	Block UDMA on devices that cause trouble with this controller.
  */
 
-static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
 {
 	if (adev->class == ATA_DEV_ATA) {
 		if (hpt_dma_blacklisted(adev, "UDMA",  bad_ata33))
@@ -185,7 +185,7 @@ static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device
 		if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
 			mask &= ~(0x0F << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 /**
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 12f387f37771..fe1b482d5291 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -272,13 +272,12 @@ static const char *bad_ata100_5[] = {
 
 /**
  *	hpt370_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
  *
  *	Block UDMA on devices that cause trouble with this controller.
  */
 
-static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask)
 {
 	if (adev->class == ATA_DEV_ATA) {
 		if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
@@ -286,24 +285,23 @@ static unsigned long hpt370_filter(const struct ata_port *ap, struct ata_device
 		if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
 			mask &= ~(0x1F << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 /**
  *	hpt370a_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
  *
  *	Block UDMA on devices that cause trouble with this controller.
  */
 
-static unsigned long hpt370a_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
 {
 	if (adev->class != ATA_DEV_ATA) {
 		if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
 			mask &= ~ (0x1F << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 /**
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 283e9afade01..3956ef26936d 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -185,31 +185,31 @@ static u8 serverworks_is_csb(struct pci_dev *pdev)
 
 /**
  *	serverworks_osb4_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
+ *	@mask: Mask of proposed modes
  *
  *	Filter the offered modes for the device to apply controller
  *	specific rules. OSB4 requires no UDMA for disks due to a FIFO
  *	bug we hit.
  */
 
-static unsigned long serverworks_osb4_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long serverworks_osb4_filter(struct ata_device *adev, unsigned long mask)
 {
 	if (adev->class == ATA_DEV_ATA)
 		mask &= ~ATA_MASK_UDMA;
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 
 /**
  *	serverworks_csb_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
+ *	@mask: Mask of proposed modes
  *
  *	Check the blacklist and disable UDMA5 if matched
  */
 
-static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned long mask)
 {
 	const char *p;
 	char model_num[ATA_ID_PROD_LEN + 1];
@@ -217,7 +217,7 @@ static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct at
 
 	/* Disk, UDMA */
 	if (adev->class != ATA_DEV_ATA)
-		return ata_pci_default_filter(ap, adev, mask);
+		return ata_pci_default_filter(adev, mask);
 
 	/* Actually do need to check */
 	ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
@@ -226,7 +226,7 @@ static unsigned long serverworks_csb_filter(const struct ata_port *ap, struct at
 		if (!strcmp(p, model_num))
 			mask &= ~(0x1F << ATA_SHIFT_UDMA);
 	}
-	return ata_pci_default_filter(ap, adev, mask);
+	return ata_pci_default_filter(adev, mask);
 }
 
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index c145d9df04d0..5a40a8d95114 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -601,7 +601,7 @@ struct ata_port_operations {
 
 	void (*set_piomode) (struct ata_port *, struct ata_device *);
 	void (*set_dmamode) (struct ata_port *, struct ata_device *);
-	unsigned long (*mode_filter) (const struct ata_port *, struct ata_device *, unsigned long);
+	unsigned long (*mode_filter) (struct ata_device *, unsigned long);
 
 	void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf);
 	void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@@ -882,7 +882,7 @@ struct pci_bits {
 extern struct ata_probe_ent *
 ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
 extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
-extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_device *, unsigned long);
+extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long);
 #endif /* CONFIG_PCI */
 
 /*

From cffacd85bcf6fc652292001873119333555fe260 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Fri, 9 Mar 2007 09:46:47 -0500
Subject: [PATCH 34/86] [libata] sata_mv: support ->cable_detect

Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_mv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 2580beb70539..10cad5d9a76d 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -402,6 +402,7 @@ static const struct ata_port_operations mv5_ops = {
 	.dev_select		= ata_std_dev_select,
 
 	.phy_reset		= mv_phy_reset,
+	.cable_detect		= ata_cable_sata,
 
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
@@ -431,6 +432,7 @@ static const struct ata_port_operations mv6_ops = {
 	.dev_select		= ata_std_dev_select,
 
 	.phy_reset		= mv_phy_reset,
+	.cable_detect		= ata_cable_sata,
 
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
@@ -460,6 +462,7 @@ static const struct ata_port_operations mv_iie_ops = {
 	.dev_select		= ata_std_dev_select,
 
 	.phy_reset		= mv_phy_reset,
+	.cable_detect		= ata_cable_sata,
 
 	.qc_prep		= mv_qc_prep_iie,
 	.qc_issue		= mv_qc_issue,
@@ -1972,7 +1975,6 @@ comreset_retry:
 		ata_port_disable(ap);
 		return;
 	}
-	ap->cbl = ATA_CBL_SATA;
 
 	/* even after SStatus reflects that device is ready,
 	 * it seems to take a while for link to be fully

From e424675f152572d8d2365e351b90bfd81686a150 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Fri, 9 Mar 2007 09:56:46 -0500
Subject: [PATCH 35/86] [libata] turn on !IORDY filter

The previous commit erroneously noted that the !IORDY filter was turned
on.  No true, that change was split out into this commit.

Originally authored and signed-off-by Alan Cox.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index eaab6d925ef2..971a737a8734 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3544,6 +3544,9 @@ static void ata_dev_xfermask(struct ata_device *dev)
 			       "other device, disabling DMA\n");
 	}
 
+	if (ap->flags & ATA_FLAG_NO_IORDY)
+		xfer_mask &= ata_pio_mask_no_iordy(dev);
+
 	if (ap->ops->mode_filter)
 		xfer_mask = ap->ops->mode_filter(dev, xfer_mask);
 

From 8cdfb29c0cd8018f92214c11c631d8926f4cb032 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Fri, 9 Mar 2007 10:54:42 -0500
Subject: [PATCH 36/86] libata/IDE: remove combined mode quirk

Both old-IDE and libata should be able handle all controllers and
devices found using normal resource reservation methods.

This eliminates the awful, low-performing split-driver configuration
where old-IDE drove the PATA portion of a PCI device, in PIO-only mode,
and libata drove the SATA portion of the /same/ PCI device, in DMA mode.
Typically vendors would ship SATA hard drive / PATA optical
configuration, which would lend itself to slow (PIO-only) CD-ROM
performance.

For Intel users running in combined mode, it is now wholly dependent on
your driver choice (potentially link order, if you compile both drivers
in) whether old-IDE or libata will drive your hardware.

In either case, you will get full performance from both SATA and PATA
ports now, without having to pass a kernel command line parameter.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 arch/i386/defconfig                 |   1 -
 arch/parisc/configs/c3000_defconfig |   1 -
 arch/x86_64/defconfig               |   1 -
 drivers/ata/Kconfig                 |   5 --
 drivers/ata/libata-sff.c            |  36 ++-------
 drivers/pci/quirks.c                | 113 ----------------------------
 include/linux/ioport.h              |   1 -
 kernel/resource.c                   |  21 ------
 8 files changed, 6 insertions(+), 173 deletions(-)

diff --git a/arch/i386/defconfig b/arch/i386/defconfig
index f4efd66e1ee5..c96911c37aea 100644
--- a/arch/i386/defconfig
+++ b/arch/i386/defconfig
@@ -692,7 +692,6 @@ CONFIG_SATA_SIL=y
 CONFIG_SATA_VIA=y
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_INTEL_COMBINED=y
 CONFIG_SATA_ACPI=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 782906b644dd..eb2f9a3d515c 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -435,7 +435,6 @@ CONFIG_SCSI_SATA_SIL=m
 # CONFIG_SCSI_SATA_ULI is not set
 CONFIG_SCSI_SATA_VIA=m
 # CONFIG_SCSI_SATA_VITESSE is not set
-CONFIG_SCSI_SATA_INTEL_COMBINED=y
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 7a1e251e333d..b26378815b91 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -631,7 +631,6 @@ CONFIG_SATA_SIL=y
 CONFIG_SATA_VIA=y
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_INTEL_COMBINED=y
 CONFIG_SATA_ACPI=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index c679bba4789b..365c306c7cf8 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -156,11 +156,6 @@ config SATA_INIC162X
 	help
 	  This option enables support for Initio 162x Serial ATA.
 
-config SATA_INTEL_COMBINED
-	bool
-	depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
-	default y
-
 config SATA_ACPI
 	bool
 	depends on ACPI && PCI
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 066689c5e509..0a194660fd21 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -779,40 +779,16 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 		/* Deal with combined mode hack. This side of the logic all
 		   goes away once the combined mode hack is killed in 2.6.21 */
 		if (!devm_request_region(dev, ATA_PRIMARY_CMD, 8, "libata")) {
-			struct resource *conflict, res;
-			res.start = ATA_PRIMARY_CMD;
-			res.end = ATA_PRIMARY_CMD + 8 - 1;
-			conflict = ____request_resource(&ioport_resource, &res);
-			while (conflict->child)
-				conflict = ____request_resource(conflict, &res);
-			if (!strcmp(conflict->name, "libata"))
-				legacy_mode |= ATA_PORT_PRIMARY;
-			else {
-				pcim_pin_device(pdev);
-				printk(KERN_WARNING "ata: 0x%0X IDE port busy\n" \
-						    "ata: conflict with %s\n",
-						    ATA_PRIMARY_CMD,
-						    conflict->name);
-			}
+			pcim_pin_device(pdev);
+			printk(KERN_WARNING "ata: 0x%0X IDE port busy\n",
+					    ATA_PRIMARY_CMD);
 		} else
 			legacy_mode |= ATA_PORT_PRIMARY;
 
 		if (!devm_request_region(dev, ATA_SECONDARY_CMD, 8, "libata")) {
-			struct resource *conflict, res;
-			res.start = ATA_SECONDARY_CMD;
-			res.end = ATA_SECONDARY_CMD + 8 - 1;
-			conflict = ____request_resource(&ioport_resource, &res);
-			while (conflict->child)
-				conflict = ____request_resource(conflict, &res);
-			if (!strcmp(conflict->name, "libata"))
-				legacy_mode |= ATA_PORT_SECONDARY;
-			else {
-				pcim_pin_device(pdev);
-				printk(KERN_WARNING "ata: 0x%X IDE port busy\n" \
-						    "ata: conflict with %s\n",
-						    ATA_SECONDARY_CMD,
-						    conflict->name);
-			}
+			pcim_pin_device(pdev);
+			printk(KERN_WARNING "ata: 0x%X IDE port busy\n",
+					    ATA_SECONDARY_CMD);
 		} else
 			legacy_mode |= ATA_PORT_SECONDARY;
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 65d6f23ead41..3411483240cd 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1303,119 +1303,6 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_EESSC,	quirk_alder_ioapic );
 #endif
 
-enum ide_combined_type { COMBINED = 0, IDE = 1, LIBATA = 2 };
-/* Defaults to combined */
-static enum ide_combined_type combined_mode;
-
-static int __init combined_setup(char *str)
-{
-	if (!strncmp(str, "ide", 3))
-		combined_mode = IDE;
-	else if (!strncmp(str, "libata", 6))
-		combined_mode = LIBATA;
-	else /* "combined" or anything else defaults to old behavior */
-		combined_mode = COMBINED;
-
-	return 1;
-}
-__setup("combined_mode=", combined_setup);
-
-#ifdef CONFIG_SATA_INTEL_COMBINED
-static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
-{
-	u8 prog, comb, tmp;
-	int ich = 0;
-
-	/*
-	 * Narrow down to Intel SATA PCI devices.
-	 */
-	switch (pdev->device) {
-	/* PCI ids taken from drivers/scsi/ata_piix.c */
-	case 0x24d1:
-	case 0x24df:
-	case 0x25a3:
-	case 0x25b0:
-		ich = 5;
-		break;
-	case 0x2651:
-	case 0x2652:
-	case 0x2653:
-	case 0x2680:	/* ESB2 */
-		ich = 6;
-		break;
-	case 0x27c0:
-	case 0x27c4:
-		ich = 7;
-		break;
-	case 0x2828:	/* ICH8M */
-		ich = 8;
-		break;
-	default:
-		/* we do not handle this PCI device */
-		return;
-	}
-
-	/*
-	 * Read combined mode register.
-	 */
-	pci_read_config_byte(pdev, 0x90, &tmp);	/* combined mode reg */
-
-	if (ich == 5) {
-		tmp &= 0x6;  /* interesting bits 2:1, PATA primary/secondary */
-		if (tmp == 0x4)		/* bits 10x */
-			comb = (1 << 0);	/* SATA port 0, PATA port 1 */
-		else if (tmp == 0x6)	/* bits 11x */
-			comb = (1 << 2);	/* PATA port 0, SATA port 1 */
-		else
-			return;			/* not in combined mode */
-	} else {
-		WARN_ON((ich != 6) && (ich != 7) && (ich != 8));
-		tmp &= 0x3;  /* interesting bits 1:0 */
-		if (tmp & (1 << 0))
-			comb = (1 << 2);	/* PATA port 0, SATA port 1 */
-		else if (tmp & (1 << 1))
-			comb = (1 << 0);	/* SATA port 0, PATA port 1 */
-		else
-			return;			/* not in combined mode */
-	}
-
-	/*
-	 * Read programming interface register.
-	 * (Tells us if it's legacy or native mode)
-	 */
-	pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
-
-	/* if SATA port is in native mode, we're ok. */
-	if (prog & comb)
-		return;
-
-	/* Don't reserve any so the IDE driver can get them (but only if
-	 * combined_mode=ide).
-	 */
-	if (combined_mode == IDE)
-		return;
-
-	/* Grab them both for libata if combined_mode=libata. */
-	if (combined_mode == LIBATA) {
-		request_region(0x1f0, 8, "libata");	/* port 0 */
-		request_region(0x170, 8, "libata");	/* port 1 */
-		return;
-	}
-
-	/* SATA port is in legacy mode.  Reserve port so that
-	 * IDE driver does not attempt to use it.  If request_region
-	 * fails, it will be obvious at boot time, so we don't bother
-	 * checking return values.
-	 */
-	if (comb == (1 << 0))
-		request_region(0x1f0, 8, "libata");	/* port 0 */
-	else
-		request_region(0x170, 8, "libata");	/* port 1 */
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    PCI_ANY_ID,	  quirk_intel_ide_combined );
-#endif /* CONFIG_SATA_INTEL_COMBINED */
-
-
 int pcie_mch_quirk;
 EXPORT_SYMBOL(pcie_mch_quirk);
 
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 6859a3b14088..71ea92319241 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -99,7 +99,6 @@ extern struct resource ioport_resource;
 extern struct resource iomem_resource;
 
 extern int request_resource(struct resource *root, struct resource *new);
-extern struct resource * ____request_resource(struct resource *root, struct resource *new);
 extern int release_resource(struct resource *new);
 extern int insert_resource(struct resource *parent, struct resource *new);
 extern int allocate_resource(struct resource *root, struct resource *new,
diff --git a/kernel/resource.c b/kernel/resource.c
index bdb55a33f969..9bd14fd3e6de 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -212,27 +212,6 @@ int request_resource(struct resource *root, struct resource *new)
 
 EXPORT_SYMBOL(request_resource);
 
-/**
- * ____request_resource - reserve a resource, with resource conflict returned
- * @root: root resource descriptor
- * @new: resource descriptor desired by caller
- *
- * Returns:
- * On success, NULL is returned.
- * On error, a pointer to the conflicting resource is returned.
- */
-struct resource *____request_resource(struct resource *root, struct resource *new)
-{
-	struct resource *conflict;
-
-	write_lock(&resource_lock);
-	conflict = __request_resource(root, new);
-	write_unlock(&resource_lock);
-	return conflict;
-}
-
-EXPORT_SYMBOL(____request_resource);
-
 /**
  * release_resource - release a previously reserved resource
  * @old: resource pointer

From 799331fda03f969b781553b786f38b83ec3bb608 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sun, 11 Mar 2007 21:19:27 +0100
Subject: [PATCH 37/86] sata_promise: add missing cable_detect hooks

The recent change which moved cable detection from
pdc_pre_reset() to the new ->cable_detect hook only
added the hook for SATAII chips, leaving SATAI chips
and the 20619 without the hook. Fixed by this patch.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_promise.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 78df5464e015..04287c80d8e9 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,7 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"2.01"
+#define DRV_VERSION	"2.02"
 
 
 enum {
@@ -194,6 +194,7 @@ static const struct ata_port_operations pdc_old_sata_ops = {
 	.thaw			= pdc_thaw,
 	.error_handler		= pdc_error_handler,
 	.post_internal_cmd	= pdc_post_internal_cmd,
+	.cable_detect		= pdc_cable_detect,
 	.data_xfer		= ata_data_xfer,
 	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
@@ -220,6 +221,7 @@ static const struct ata_port_operations pdc_pata_ops = {
 	.thaw			= pdc_thaw,
 	.error_handler		= pdc_error_handler,
 	.post_internal_cmd	= pdc_post_internal_cmd,
+	.cable_detect		= pdc_cable_detect,
 	.data_xfer		= ata_data_xfer,
 	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,

From 724114a5738131997af9272f3c716dbe457c1690 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sun, 11 Mar 2007 21:20:43 +0100
Subject: [PATCH 38/86] sata_promise: separate SATA and PATA ops

This patch changes sata_promise so that the PATA ports
on TX2plus chips are bound to the pdc_pata_ops structure.
This means that operations called from the SATA ops
structures don't need any SATA-vs-PATA tests any more.
Instead, operations that depend on a port being SATA or
PATA are separated into different procedures.

* pdc_cable_type() is split into a PATA version and a
  SATA version
* pdc_error_handler() is split into a PATA version and a
  SATA version, that both call a common version after
  setting up the `hardreset' function pointer
* pdc_old_check_atapi_dma() is now only used for SATAI
  ports, so is renamed to pdc_old_sata_check_atapi_dma()
  and simplified
* pdc_sata_scr_{read,write}() are now only used for SATA
  ports, so their is-not-SATA tests are removed
* pdc_port_start() is split into three procedures: a wrapper
  which performs the ->ops adjustment on TX2plus PATA ports,
  a procedure with the common code, and a procedure with
  the SATA-specific code (this bit might be cleaned up by
  Tejun's new init model)

Tested on 20619, 20575, and 20775 chips.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_promise.c | 107 +++++++++++++++++++++++--------------
 1 file changed, 66 insertions(+), 41 deletions(-)

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 04287c80d8e9..acc9913dd6dc 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,7 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"2.02"
+#define DRV_VERSION	"2.03"
 
 
 enum {
@@ -124,14 +124,16 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
-static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc);
+static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc);
 static void pdc_irq_clear(struct ata_port *ap);
 static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
 static void pdc_freeze(struct ata_port *ap);
 static void pdc_thaw(struct ata_port *ap);
-static void pdc_error_handler(struct ata_port *ap);
+static void pdc_pata_error_handler(struct ata_port *ap);
+static void pdc_sata_error_handler(struct ata_port *ap);
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
-static int pdc_cable_detect(struct ata_port *ap);
+static int pdc_pata_cable_detect(struct ata_port *ap);
+static int pdc_sata_cable_detect(struct ata_port *ap);
 
 static struct scsi_host_template pdc_ata_sht = {
 	.module			= THIS_MODULE,
@@ -164,9 +166,9 @@ static const struct ata_port_operations pdc_sata_ops = {
 	.qc_issue		= pdc_qc_issue_prot,
 	.freeze			= pdc_freeze,
 	.thaw			= pdc_thaw,
-	.error_handler		= pdc_error_handler,
+	.error_handler		= pdc_sata_error_handler,
 	.post_internal_cmd	= pdc_post_internal_cmd,
-	.cable_detect		= pdc_cable_detect,
+	.cable_detect		= pdc_sata_cable_detect,
 	.data_xfer		= ata_data_xfer,
 	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
@@ -186,15 +188,15 @@ static const struct ata_port_operations pdc_old_sata_ops = {
 	.check_status		= ata_check_status,
 	.exec_command		= pdc_exec_command_mmio,
 	.dev_select		= ata_std_dev_select,
-	.check_atapi_dma	= pdc_old_check_atapi_dma,
+	.check_atapi_dma	= pdc_old_sata_check_atapi_dma,
 
 	.qc_prep		= pdc_qc_prep,
 	.qc_issue		= pdc_qc_issue_prot,
 	.freeze			= pdc_freeze,
 	.thaw			= pdc_thaw,
-	.error_handler		= pdc_error_handler,
+	.error_handler		= pdc_sata_error_handler,
 	.post_internal_cmd	= pdc_post_internal_cmd,
-	.cable_detect		= pdc_cable_detect,
+	.cable_detect		= pdc_sata_cable_detect,
 	.data_xfer		= ata_data_xfer,
 	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
@@ -219,9 +221,9 @@ static const struct ata_port_operations pdc_pata_ops = {
 	.qc_issue		= pdc_qc_issue_prot,
 	.freeze			= pdc_freeze,
 	.thaw			= pdc_thaw,
-	.error_handler		= pdc_error_handler,
+	.error_handler		= pdc_pata_error_handler,
 	.post_internal_cmd	= pdc_post_internal_cmd,
-	.cable_detect		= pdc_cable_detect,
+	.cable_detect		= pdc_pata_cable_detect,
 	.data_xfer		= ata_data_xfer,
 	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
@@ -316,18 +318,12 @@ static struct pci_driver pdc_ata_pci_driver = {
 };
 
 
-static int pdc_port_start(struct ata_port *ap)
+static int pdc_common_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host->dev;
-	struct pdc_host_priv *hp = ap->host->private_data;
 	struct pdc_port_priv *pp;
 	int rc;
 
-	/* fix up port flags and cable type for SATA+PATA chips */
-	ap->flags |= hp->port_flags[ap->port_no];
-	if (ap->flags & ATA_FLAG_SATA)
-		ap->cbl = ATA_CBL_SATA;
-
 	rc = ata_port_start(ap);
 	if (rc)
 		return rc;
@@ -342,8 +338,20 @@ static int pdc_port_start(struct ata_port *ap)
 
 	ap->private_data = pp;
 
+	return 0;
+}
+
+static int pdc_sata_port_start(struct ata_port *ap)
+{
+	struct pdc_host_priv *hp = ap->host->private_data;
+	int rc;
+
+	rc = pdc_common_port_start(ap);
+	if (rc)
+		return rc;
+
 	/* fix up PHYMODE4 align timing */
-	if ((hp->flags & PDC_FLAG_GEN_II) && sata_scr_valid(ap)) {
+	if (hp->flags & PDC_FLAG_GEN_II) {
 		void __iomem *mmio = (void __iomem *) ap->ioaddr.scr_addr;
 		unsigned int tmp;
 
@@ -355,6 +363,21 @@ static int pdc_port_start(struct ata_port *ap)
 	return 0;
 }
 
+static int pdc_port_start(struct ata_port *ap)
+{
+	struct pdc_host_priv *hp = ap->host->private_data;
+
+	/* fix up port flags and cable type for SATA+PATA chips */
+	ap->flags |= hp->port_flags[ap->port_no];
+	if (ap->flags & ATA_FLAG_SATA) {
+		ap->cbl = ATA_CBL_SATA;
+		return pdc_sata_port_start(ap);
+	} else {
+		ap->ops = &pdc_pata_ops;
+		return pdc_common_port_start(ap);
+	}
+}
+
 static void pdc_reset_port(struct ata_port *ap)
 {
 	void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
@@ -377,23 +400,25 @@ static void pdc_reset_port(struct ata_port *ap)
 	readl(mmio);	/* flush */
 }
 
-static int pdc_cable_detect(struct ata_port *ap)
+static int pdc_pata_cable_detect(struct ata_port *ap)
 {
 	u8 tmp;
 	void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
 
-	if (!sata_scr_valid(ap)) {
-		tmp = readb(mmio);
-		if (tmp & 0x01)
-			return ATA_CBL_PATA40;
-		return ATA_CBL_PATA80;
-	}
+	tmp = readb(mmio);
+	if (tmp & 0x01)
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
+static int pdc_sata_cable_detect(struct ata_port *ap)
+{
 	return ATA_CBL_SATA;
 }
 
 static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
-	if (sc_reg > SCR_CONTROL || ap->cbl != ATA_CBL_SATA)
+	if (sc_reg > SCR_CONTROL)
 		return 0xffffffffU;
 	return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
 }
@@ -402,7 +427,7 @@ static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
 			       u32 val)
 {
-	if (sc_reg > SCR_CONTROL || ap->cbl != ATA_CBL_SATA)
+	if (sc_reg > SCR_CONTROL)
 		return;
 	writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
 }
@@ -558,22 +583,26 @@ static void pdc_thaw(struct ata_port *ap)
 	readl(mmio + PDC_CTLSTAT); /* flush */
 }
 
-static void pdc_error_handler(struct ata_port *ap)
+static void pdc_common_error_handler(struct ata_port *ap, ata_reset_fn_t hardreset)
 {
-	ata_reset_fn_t hardreset;
-
 	if (!(ap->pflags & ATA_PFLAG_FROZEN))
 		pdc_reset_port(ap);
 
-	hardreset = NULL;
-	if (sata_scr_valid(ap))
-		hardreset = sata_std_hardreset;
-
 	/* perform recovery */
 	ata_do_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
 		  ata_std_postreset);
 }
 
+static void pdc_pata_error_handler(struct ata_port *ap)
+{
+	pdc_common_error_handler(ap, NULL);
+}
+
+static void pdc_sata_error_handler(struct ata_port *ap)
+{
+	pdc_common_error_handler(ap, sata_std_hardreset);
+}
+
 static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
@@ -763,14 +792,10 @@ static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
 	return pio;
 }
 
-static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc)
+static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc)
 {
-	struct ata_port *ap = qc->ap;
-
 	/* First generation chips cannot use ATAPI DMA on SATA ports */
-	if (sata_scr_valid(ap))
-		return 1;
-	return pdc_check_atapi_dma(qc);
+	return 1;
 }
 
 static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base,

From 176efb054422bffe6b5a34194ffad134366c7f7e Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Wed, 14 Mar 2007 09:51:35 +0100
Subject: [PATCH 39/86] sata_promise: decode and report error reasons

This patch adds much needed error reason decoding and
reporting to sata_promise. It's simplistic but should
log all relevant error info the controller provides.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_promise.c | 64 ++++++++++++++++++++++++++++++++------
 1 file changed, 55 insertions(+), 9 deletions(-)

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index acc9913dd6dc..baa836881b03 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,7 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"2.03"
+#define DRV_VERSION	"2.04"
 
 
 enum {
@@ -70,8 +70,23 @@ enum {
 	PDC_TBG_MODE		= 0x41C, /* TBG mode (not SATAII) */
 	PDC_SLEW_CTL		= 0x470, /* slew rate control reg (not SATAII) */
 
-	PDC_ERR_MASK		= (1<<19) | (1<<20) | (1<<21) | (1<<22) |
-				  (1<<8) | (1<<9) | (1<<10),
+	/* PDC_GLOBAL_CTL bit definitions */
+	PDC_PH_ERR		= (1 <<  8), /* PCI error while loading packet */
+	PDC_SH_ERR		= (1 <<  9), /* PCI error while loading S/G table */
+	PDC_DH_ERR		= (1 << 10), /* PCI error while loading data */
+	PDC2_HTO_ERR		= (1 << 12), /* host bus timeout */
+	PDC2_ATA_HBA_ERR	= (1 << 13), /* error during SATA DATA FIS transmission */
+	PDC2_ATA_DMA_CNT_ERR	= (1 << 14), /* DMA DATA FIS size differs from S/G count */
+	PDC_OVERRUN_ERR		= (1 << 19), /* S/G byte count larger than HD requires */
+	PDC_UNDERRUN_ERR	= (1 << 20), /* S/G byte count less than HD requires */
+	PDC_DRIVE_ERR		= (1 << 21), /* drive error */
+	PDC_PCI_SYS_ERR		= (1 << 22), /* PCI system error */
+	PDC1_PCI_PARITY_ERR	= (1 << 23), /* PCI parity error (from SATA150 driver) */
+	PDC1_ERR_MASK		= PDC1_PCI_PARITY_ERR,
+	PDC2_ERR_MASK		= PDC2_HTO_ERR | PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR,
+	PDC_ERR_MASK		= (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC_OVERRUN_ERR
+				   | PDC_UNDERRUN_ERR | PDC_DRIVE_ERR | PDC_PCI_SYS_ERR
+				   | PDC1_ERR_MASK | PDC2_ERR_MASK),
 
 	board_2037x		= 0,	/* FastTrak S150 TX2plus */
 	board_20319		= 1,	/* FastTrak S150 TX4 */
@@ -615,17 +630,48 @@ static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
 		pdc_reset_port(ap);
 }
 
+static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc,
+			   u32 port_status, u32 err_mask)
+{
+	struct ata_eh_info *ehi = &ap->eh_info;
+	unsigned int ac_err_mask = 0;
+
+	ata_ehi_clear_desc(ehi);
+	ata_ehi_push_desc(ehi, "port_status 0x%08x", port_status);
+	port_status &= err_mask;
+
+	if (port_status & PDC_DRIVE_ERR)
+		ac_err_mask |= AC_ERR_DEV;
+	if (port_status & (PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR))
+		ac_err_mask |= AC_ERR_HSM;
+	if (port_status & (PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR))
+		ac_err_mask |= AC_ERR_ATA_BUS;
+	if (port_status & (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC2_HTO_ERR
+			   | PDC_PCI_SYS_ERR | PDC1_PCI_PARITY_ERR))
+		ac_err_mask |= AC_ERR_HOST_BUS;
+
+	ehi->action |= ATA_EH_SOFTRESET;
+	qc->err_mask |= ac_err_mask;
+	ata_port_freeze(ap);
+}
+
 static inline unsigned int pdc_host_intr( struct ata_port *ap,
                                           struct ata_queued_cmd *qc)
 {
 	unsigned int handled = 0;
-	u32 tmp;
-	void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL;
+	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	struct pdc_host_priv *hp = ap->host->private_data;
+	u32 port_status, err_mask;
 
-	tmp = readl(mmio);
-	if (tmp & PDC_ERR_MASK) {
-		qc->err_mask |= AC_ERR_DEV;
-		pdc_reset_port(ap);
+	err_mask = PDC_ERR_MASK;
+	if (hp->flags & PDC_FLAG_GEN_II)
+		err_mask &= ~PDC1_ERR_MASK;
+	else
+		err_mask &= ~PDC2_ERR_MASK;
+	port_status = readl(port_mmio + PDC_GLOBAL_CTL);
+	if (unlikely(port_status & err_mask)) {
+		pdc_error_intr(ap, qc, port_status, err_mask);
+		return 1;
 	}
 
 	switch (qc->tf.protocol) {

From 771b8dad9653d2659e0ffcc237184cb16c317788 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Wed, 14 Mar 2007 01:20:51 +0900
Subject: [PATCH 40/86] libata: hardreset on SERR_INTERNAL

There was a rare report where SB600 reported SERR_INTERNAL and SRST
couldn't get it out of the failure mode.  Hardreset on SERR_INTERNAL.
As the problem is intermittent, whether this fixes the problem or not
hasn't been verified yet, but hardresetting the channel on internal
error is a good idea anyway.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-eh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 39f556c02992..185876aba647 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1056,7 +1056,7 @@ static void ata_eh_analyze_serror(struct ata_port *ap)
 	}
 	if (serror & SERR_INTERNAL) {
 		err_mask |= AC_ERR_SYSTEM;
-		action |= ATA_EH_SOFTRESET;
+		action |= ATA_EH_HARDRESET;
 	}
 	if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG))
 		ata_ehi_hotplugged(&ehc->i);

From 120bda35ff8514c937dac6d4e5c7dc6c01c699ac Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Mon, 26 Mar 2007 02:17:43 -0700
Subject: [PATCH 41/86] git-libata-all-ipr-fix

drivers/scsi/ipr.c: In function '__ipr_eh_dev_reset':
drivers/scsi/ipr.c:3865: warning: passing argument 4 of 'ata_do_eh' from incompatible pointer type

Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/scsi/ipr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 95045e33710d..e9bd29975db4 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3770,7 +3770,8 @@ static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg,
  * Return value:
  *	0 on success / non-zero on failure
  **/
-static int ipr_sata_reset(struct ata_port *ap, unsigned int *classes)
+static int ipr_sata_reset(struct ata_port *ap, unsigned int *classes,
+				unsigned long deadline)
 {
 	struct ipr_sata_port *sata_port = ap->private_data;
 	struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg;

From 4dc5200d70a3e81510956c35fbb9fa3c15b440a5 Mon Sep 17 00:00:00 2001
From: Alan <alan@lxorguk.ukuu.org.uk>
Date: Mon, 26 Mar 2007 21:43:34 -0800
Subject: [PATCH 42/86] pcmcia - spot slave decode flaws (for testing)

It tries to spot when the slave is a mirror of the master and to fix up
problems that causes.

I've got two confirmations so far that this plus the "can fail set_xfer" patch
work for folks who had problems before.  Also if you are unfortunate enough to
be running something like HAL then it'll automount the same disk twice for you
and corrupt it without the fix (aint that nice...)

Tested (successfully) by Komuro <komurojun-mbn@nifty.com>.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_pcmcia.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 820332a7ec7b..171da0aeb65f 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -54,6 +54,39 @@ struct ata_pcmcia_info {
 	dev_node_t	node;
 };
 
+/**
+ *	pcmcia_set_mode	-	PCMCIA specific mode setup
+ *	@ap: Port
+ *	@r_failed_dev: Return pointer for failed device
+ *
+ *	Perform the tuning and setup of the devices and timings, which
+ *	for PCMCIA is the same as any other controller. We wrap it however
+ *	as we need to spot hardware with incorrect or missing master/slave
+ *	decode, which alas is embarrassingly common in the PC world
+ */
+
+static int pcmcia_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
+{
+	struct ata_device *master = &ap->device[0];
+	struct ata_device *slave = &ap->device[1];
+
+	if (!ata_dev_enabled(master) || !ata_dev_enabled(slave))
+		return ata_do_set_mode(ap, r_failed_dev);
+
+	if (memcmp(master->id + ATA_ID_FW_REV,  slave->id + ATA_ID_FW_REV,
+			   ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0)
+	{
+		/* Suspicious match, but could be two cards from
+		   the same vendor - check serial */
+		if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
+			   ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) {
+			ata_dev_printk(slave, KERN_WARNING, "is a ghost device, ignoring.\n");
+			ata_dev_disable(slave);
+		}
+	}
+	return ata_do_set_mode(ap, r_failed_dev);
+}
+
 static struct scsi_host_template pcmcia_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -73,6 +106,7 @@ static struct scsi_host_template pcmcia_sht = {
 };
 
 static struct ata_port_operations pcmcia_port_ops = {
+	.set_mode	= pcmcia_set_mode,
 	.port_disable	= ata_port_disable,
 	.tf_load	= ata_tf_load,
 	.tf_read	= ata_tf_read,

From f2fb344beadf79f9d265c3fc60e8399bbf917a4d Mon Sep 17 00:00:00 2001
From: Robert Hancock <hancockr@shaw.ca>
Date: Mon, 26 Mar 2007 21:43:36 -0800
Subject: [PATCH 43/86] sata_nv: don't read shadow registers when in ADMA mode

Reading from the ATA shadow registers while we are in ADMA mode may cause
undefined behavior.  Don't read the ATA status register when completing
commands for this reason, it shouldn't be needed as the controller will
notify us if the command failed.  Also, don't allow commands with result
taskfile requested to execute in ADMA mode, since that requires accessing
the shadow registers.  We also still need to override tf_read since libata
will read the result taskfile on a command failure, and we need to go into
port register mode before allowing this.

Signed-off-by: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_nv.c | 33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 9d9670a9b117..8a9473b16ec3 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -260,6 +260,7 @@ static int nv_adma_port_resume(struct ata_port *ap);
 static void nv_adma_error_handler(struct ata_port *ap);
 static void nv_adma_host_stop(struct ata_host *host);
 static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc);
+static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 
 enum nv_host_type
 {
@@ -435,7 +436,7 @@ static const struct ata_port_operations nv_ck804_ops = {
 static const struct ata_port_operations nv_adma_ops = {
 	.port_disable		= ata_port_disable,
 	.tf_load		= ata_tf_load,
-	.tf_read		= ata_tf_read,
+	.tf_read		= nv_adma_tf_read,
 	.check_atapi_dma	= nv_adma_check_atapi_dma,
 	.exec_command		= ata_exec_command,
 	.check_status		= ata_check_status,
@@ -667,6 +668,18 @@ static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc)
 	return !(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE);
 }
 
+static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	/* Since commands where a result TF is requested are not
+	   executed in ADMA mode, the only time this function will be called
+	   in ADMA mode will be if a command fails. In this case we
+	   don't care about going into register mode with ADMA commands
+	   pending, as the commands will all shortly be aborted anyway. */
+	nv_adma_register_mode(ap);
+
+	ata_tf_read(ap, tf);
+}
+
 static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
 {
 	unsigned int idx = 0;
@@ -738,19 +751,11 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
 		return 1;
 	}
 
-	if (flags & NV_CPB_RESP_DONE) {
+	if (likely(flags & NV_CPB_RESP_DONE)) {
 		struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num);
 		VPRINTK("CPB flags done, flags=0x%x\n", flags);
 		if (likely(qc)) {
-			/* Grab the ATA port status for non-NCQ commands.
-			   For NCQ commands the current status may have nothing to do with
-			   the command just completed. */
-			if (qc->tf.protocol != ATA_PROT_NCQ) {
-				u8 ata_status = readb(pp->ctl_block + (ATA_REG_STATUS * 4));
-				qc->err_mask |= ac_err_mask(ata_status);
-			}
-			DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num,
-				qc->err_mask);
+			DPRINTK("Completing qc from tag %d\n",cpb_num);
 			ata_qc_complete(qc);
 		} else {
 			struct ata_eh_info *ehi = &ap->eh_info;
@@ -1167,9 +1172,11 @@ static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
 	struct nv_adma_port_priv *pp = qc->ap->private_data;
 
 	/* ADMA engine can only be used for non-ATAPI DMA commands,
-	   or interrupt-driven no-data commands. */
+	   or interrupt-driven no-data commands, where a result taskfile
+	   is not required. */
 	if((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
-	   (qc->tf.flags & ATA_TFLAG_POLLING))
+	   (qc->tf.flags & ATA_TFLAG_POLLING) ||
+	   (qc->flags & ATA_QCFLAG_RESULT_TF))
 		return 1;
 
 	if((qc->flags & ATA_QCFLAG_DMAMAP) ||

From b723d1448cbefc9fd591798d229d1dafb358bc66 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 26 Mar 2007 21:43:37 -0800
Subject: [PATCH 44/86] pata_ali: remove all the crap again and switch to
 cable_detect method

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_ali.c | 68 ++++++------------------------------------
 1 file changed, 9 insertions(+), 59 deletions(-)

diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 047f636e258d..d40edebb510a 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.3"
+#define DRV_VERSION "0.7.4"
 
 /*
  *	Cable special cases
@@ -89,59 +89,6 @@ static int ali_c2_cable_detect(struct ata_port *ap)
 		return ATA_CBL_PATA80;
 }
 
-/**
- *	ali_early_error_handler	-	reset for eary chip
- *	@ap: ATA port
- *
- *	Handle the reset callback for the later chips with cable detect
- */
-
-static int ali_c2_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ali_c2_cable_detect(ap);
-	return ata_std_prereset(ap);
-}
-
-static void ali_c2_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ali_c2_pre_reset,
-			       ata_std_softreset, NULL,
-			       ata_std_postreset);
-}
-
-/**
- *	ali_early_cable_detect	-	cable detection
- *	@ap: ATA port
- *
- *	Perform cable detection for older chipsets. This turns out to be
- *	rather easy to implement
- */
-
-static int ali_early_cable_detect(struct ata_port *ap)
-{
-	return ATA_CBL_PATA40;
-}
-
-/**
- *	ali_early_probe_init	-	reset for early chip
- *	@ap: ATA port
- *
- *	Handle the reset callback for the early (pre cable detect) chips.
- */
-
-static int ali_early_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ali_early_cable_detect(ap);
-	return ata_std_prereset(ap);
-}
-
-static void ali_early_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, ali_early_pre_reset,
-				     ata_std_softreset, NULL,
-				     ata_std_postreset);
-}
-
 /**
  *	ali_20_filter		-	filter for earlier ALI DMA
  *	@ap: ALi ATA port
@@ -314,7 +261,6 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 
 /**
  *	ali_lock_sectors	-	Keep older devices to 255 sector mode
- *	@ap: ATA port
  *	@adev: Device
  *
  *	Called during the bus probe for each device that is found. We use
@@ -366,8 +312,9 @@ static struct ata_port_operations ali_early_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_early_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -402,8 +349,9 @@ static struct ata_port_operations ali_20_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_early_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -440,8 +388,9 @@ static struct ata_port_operations ali_c2_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_c2_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ali_c2_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -477,8 +426,9 @@ static struct ata_port_operations ali_c5_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_c2_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ali_c2_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,

From 3be40d7665e733c2b53bac38fcb148433718f555 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 26 Mar 2007 21:43:40 -0800
Subject: [PATCH 45/86] pata_qdI: restore cable detect

Signed-off-by: Alan Cox <number6@the-village.bc.nu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_qdi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index c3810012f3f4..44472641db28 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -183,6 +183,7 @@ static struct ata_port_operations qdi6500_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= qdi_qc_issue_prot,
@@ -211,6 +212,7 @@ static struct ata_port_operations qdi6580_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= qdi_qc_issue_prot,

From 3b4ba5910b150c5db019642899d7b6ba9bec27b4 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 26 Mar 2007 21:43:40 -0800
Subject: [PATCH 46/86] pata_netcell: re-remove all the crud

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_netcell.c | 31 +++----------------------------
 1 file changed, 3 insertions(+), 28 deletions(-)

diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 38f99b38a5ea..dbba5b77d79c 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -16,33 +16,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_netcell"
-#define DRV_VERSION	"0.1.6"
-
-/**
- *	netcell_probe_init	-	check for 40/80 pin
- *	@ap: Port
- *
- *	Cables are handled by the RAID controller. Report 80 pin.
- */
-
-static int netcell_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	netcell_probe_reset - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void netcell_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, netcell_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
+#define DRV_VERSION	"0.1.7"
 
 /* No PIO or DMA methods needed for this device */
 
@@ -81,8 +55,9 @@ static const struct ata_port_operations netcell_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= netcell_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_80wire,
 
 	/* BMDMA handling is PCI ATA format, use helpers */
 	.bmdma_setup		= ata_bmdma_setup,

From c45a6328742be39eee351a4ac7a5e60f7d048846 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 26 Mar 2007 21:43:41 -0800
Subject: [PATCH 47/86] pata_sl82c105: restore cable detect method

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_sl82c105.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index b681441cfcb9..da9e22b25753 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -58,7 +58,6 @@ static int sl82c105_pre_reset(struct ata_port *ap)
 
 	if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
 		return -ENOENT;
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -238,6 +237,7 @@ static struct ata_port_operations sl82c105_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= sl82c105_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= sl82c105_bmdma_start,

From 2f5344b1be57e63b6a3bfa19e69c5cd84f031edb Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 26 Mar 2007 21:43:42 -0800
Subject: [PATCH 48/86] pata_winbond: restore cable method

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_winbond.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 6c111035fc84..519943239dbf 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -152,6 +152,7 @@ static struct ata_port_operations winbond_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,

From 5c25bf0d2893ae03287693b958e9ef12e4893e04 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 26 Mar 2007 21:43:43 -0800
Subject: [PATCH 49/86] pata_optidma: rework for cable detect and to remove
 post_set_mode()

A lot of noise because I had to rename the optidma_set_mode() method to
avoid confusion with the new ->set_mode() method that was added. Cable
detect side is pretty trivial.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_optidma.c | 52 ++++++++++++++++++++------------------
 1 file changed, 28 insertions(+), 24 deletions(-)

diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 9764907e8a13..b70e04c144df 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.3.2"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
@@ -62,7 +62,6 @@ static int optidma_pre_reset(struct ata_port *ap)
 	if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
 		return -ENOENT;
 
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -115,7 +114,7 @@ static void optidma_lock(struct ata_port *ap)
 }
 
 /**
- *	optidma_set_mode	-	set mode data
+ *	optidma_mode_setup	-	set mode data
  *	@ap: ATA interface
  *	@adev: ATA device
  *	@mode: Mode to set
@@ -128,7 +127,7 @@ static void optidma_lock(struct ata_port *ap)
  *	IRQ here we depend on the host set locking to avoid catastrophe.
  */
 
-static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode)
+static void optidma_mode_setup(struct ata_port *ap, struct ata_device *adev, u8 mode)
 {
 	struct ata_device *pair = ata_dev_pair(adev);
 	int pio = adev->pio_mode - XFER_PIO_0;
@@ -202,7 +201,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
 }
 
 /**
- *	optiplus_set_mode	-	DMA setup for Firestar Plus
+ *	optiplus_mode_setup	-	DMA setup for Firestar Plus
  *	@ap: ATA port
  *	@adev: device
  *	@mode: desired mode
@@ -213,7 +212,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
  *	one
  */
 
-static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mode)
+static void optiplus_mode_setup(struct ata_port *ap, struct ata_device *adev, u8 mode)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u8 udcfg;
@@ -225,7 +224,7 @@ static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 m
 	pci_read_config_byte(pdev, 0x44, &udcfg);
 	if (mode <= XFER_UDMA_0) {
 		udcfg &= ~(1 << unit);
-		optidma_set_mode(ap, adev, adev->dma_mode);
+		optidma_mode_setup(ap, adev, adev->dma_mode);
 	} else {
 		udcfg |=  (1 << unit);
 		if (ap->port_no) {
@@ -253,7 +252,7 @@ static void optiplus_set_mode(struct ata_port *ap, struct ata_device *adev, u8 m
 
 static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
 {
-	optidma_set_mode(ap, adev, adev->pio_mode);
+	optidma_mode_setup(ap, adev, adev->pio_mode);
 }
 
 /**
@@ -268,7 +267,7 @@ static void optidma_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
 
 static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 {
-	optidma_set_mode(ap, adev, adev->dma_mode);
+	optidma_mode_setup(ap, adev, adev->dma_mode);
 }
 
 /**
@@ -283,7 +282,7 @@ static void optidma_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 
 static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
 {
-	optiplus_set_mode(ap, adev, adev->pio_mode);
+	optiplus_mode_setup(ap, adev, adev->pio_mode);
 }
 
 /**
@@ -298,7 +297,7 @@ static void optiplus_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
 
 static void optiplus_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 {
-	optiplus_set_mode(ap, adev, adev->dma_mode);
+	optiplus_mode_setup(ap, adev, adev->dma_mode);
 }
 
 /**
@@ -322,26 +321,29 @@ static u8 optidma_make_bits43(struct ata_device *adev)
 }
 
 /**
- *	optidma_post_set_mode	-	finalize PCI setup
+ *	optidma_set_mode	-	mode setup
  *	@ap: port to set up
  *
- *	Finalise the configuration by writing the nibble of extra bits
- *	of data into the chip.
+ *	Use the standard setup to tune the chipset and then finalise the
+ *	configuration by writing the nibble of extra bits of data into
+ *	the chip.
  */
 
-static void optidma_post_set_mode(struct ata_port *ap)
+static int optidma_set_mode(struct ata_port *ap, struct ata_device **r_failed)
 {
 	u8 r;
 	int nybble = 4 * ap->port_no;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int rc  = ata_do_set_mode(ap, r_failed);
+	if (rc == 0) {
+		pci_read_config_byte(pdev, 0x43, &r);
 
-	pci_read_config_byte(pdev, 0x43, &r);
-
-	r &= (0x0F << nybble);
-	r |= (optidma_make_bits43(&ap->device[0]) +
-	     (optidma_make_bits43(&ap->device[0]) << 2)) << nybble;
-
-	pci_write_config_byte(pdev, 0x43, r);
+		r &= (0x0F << nybble);
+		r |= (optidma_make_bits43(&ap->device[0]) +
+		     (optidma_make_bits43(&ap->device[0]) << 2)) << nybble;
+		pci_write_config_byte(pdev, 0x43, r);
+	}
+	return rc;
 }
 
 static struct scsi_host_template optidma_sht = {
@@ -381,7 +383,8 @@ static struct ata_port_operations optidma_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.error_handler	= optidma_error_handler,
-	.post_set_mode	= optidma_post_set_mode,
+	.set_mode	= optidma_set_mode,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -416,7 +419,8 @@ static struct ata_port_operations optiplus_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.error_handler	= optidma_error_handler,
-	.post_set_mode	= optidma_post_set_mode,
+	.set_mode	= optidma_set_mode,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,

From 1234010684bb9cde51125ec3d1c71054a9f24f47 Mon Sep 17 00:00:00 2001
From: "Robin H\\. Johnson" <robbat2@gentoo.org>
Date: Wed, 28 Mar 2007 18:02:07 -0700
Subject: [PATCH 50/86] Add notation that the Asus W5F laptop has a short cable
 instead of 80-wire.

The Asus W5F laptop uses a short cable instead of the 80-wire style, and thus
needs to be in the ich_laptop special cases for correct detection and support
of UDMA/100 for the hard drive. I noticed this because I have the W5F laptop,
and was tracing apparent slowness.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ata_piix.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index b952c584338f..a2c5756c69b6 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -580,6 +580,7 @@ static const struct ich_laptop ich_laptop[] = {
 	/* devid, subvendor, subdev */
 	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
 	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
+	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
 	/* end marker */
 	{ 0, }
 };

From 5a5dbd18a7496ed403f6f54bb20c955c65482fa5 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Fri, 16 Mar 2007 10:22:26 -0400
Subject: [PATCH 51/86] libata: add support for READ/WRITE LONG

The READ/WRITE LONG commands are theoretically obsolete,
but the majority of drives in existance still implement them.

The WRITE_LONG and WRITE_LONG_ONCE commands are of particular
interest for fault injection testing -- eg. creating "media errors"
at specific locations on a disk.

The fussy bit is that these commands require a non-standard
sector size, usually 520 bytes instead of 512.

This patch adds support to libata for READ/WRITE LONG commands
issued via SG_IO/ATA_16.

Signed-off-by:  Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 20 ++++++++++----------
 drivers/ata/libata-scsi.c | 12 ++++++++++++
 include/linux/ata.h       |  6 ++++++
 include/linux/libata.h    |  2 ++
 4 files changed, 30 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 971a737a8734..96bf86f67388 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4106,10 +4106,10 @@ void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
 
 
 /**
- *	ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data.
+ *	ata_pio_sector - Transfer a sector of data.
  *	@qc: Command on going
  *
- *	Transfer ATA_SECT_SIZE of data from/to the ATA device.
+ *	Transfer qc->sect_size bytes of data from/to the ATA device.
  *
  *	LOCKING:
  *	Inherited from caller.
@@ -4124,7 +4124,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 	unsigned int offset;
 	unsigned char *buf;
 
-	if (qc->curbytes == qc->nbytes - ATA_SECT_SIZE)
+	if (qc->curbytes == qc->nbytes - qc->sect_size)
 		ap->hsm_task_state = HSM_ST_LAST;
 
 	page = sg[qc->cursg].page;
@@ -4144,17 +4144,17 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 		buf = kmap_atomic(page, KM_IRQ0);
 
 		/* do the actual data transfer */
-		ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write);
+		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
 
 		kunmap_atomic(buf, KM_IRQ0);
 		local_irq_restore(flags);
 	} else {
 		buf = page_address(page);
-		ap->ops->data_xfer(qc->dev, buf + offset, ATA_SECT_SIZE, do_write);
+		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
 	}
 
-	qc->curbytes += ATA_SECT_SIZE;
-	qc->cursg_ofs += ATA_SECT_SIZE;
+	qc->curbytes += qc->sect_size;
+	qc->cursg_ofs += qc->sect_size;
 
 	if (qc->cursg_ofs == (&sg[qc->cursg])->length) {
 		qc->cursg++;
@@ -4163,10 +4163,10 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_pio_sectors - Transfer one or many 512-byte sectors.
+ *	ata_pio_sectors - Transfer one or many sectors.
  *	@qc: Command on going
  *
- *	Transfer one or many ATA_SECT_SIZE of data from/to the
+ *	Transfer one or many sectors of data from/to the
  *	ATA device for the DRQ request.
  *
  *	LOCKING:
@@ -4181,7 +4181,7 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc)
 
 		WARN_ON(qc->dev->multi_count == 0);
 
-		nsect = min((qc->nbytes - qc->curbytes) / ATA_SECT_SIZE,
+		nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size,
 			    qc->dev->multi_count);
 		while (nsect--)
 			ata_pio_sector(qc);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 7d41afe8ccbc..563ef0bfb038 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2678,6 +2678,18 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
 		tf->device = qc->dev->devno ?
 			tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
 
+	/* READ/WRITE LONG use a non-standard sect_size */
+	qc->sect_size = ATA_SECT_SIZE;
+	switch (tf->command) {
+	case ATA_CMD_READ_LONG:
+	case ATA_CMD_READ_LONG_ONCE:
+	case ATA_CMD_WRITE_LONG:
+	case ATA_CMD_WRITE_LONG_ONCE:
+		if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1)
+			goto invalid_fld;
+		qc->sect_size = scmd->request_bufflen;
+	}
+
 	/*
 	 * Filter SET_FEATURES - XFER MODE command -- otherwise,
 	 * SET_FEATURES - XFER MODE must be preceded/succeeded
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 6caeb98e29dd..ffb6cdc5010d 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -164,6 +164,12 @@ enum {
 	/* READ_LOG_EXT pages */
 	ATA_LOG_SATA_NCQ	= 0x10,
 
+	/* READ/WRITE LONG (obsolete) */
+	ATA_CMD_READ_LONG	= 0x22,
+	ATA_CMD_READ_LONG_ONCE	= 0x23,
+	ATA_CMD_WRITE_LONG	= 0x32,
+	ATA_CMD_WRITE_LONG_ONCE	= 0x33,
+
 	/* SETFEATURES stuff */
 	SETFEATURES_XFER	= 0x03,
 	XFER_UDMA_7		= 0x47,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5a40a8d95114..12237d4b9f9b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -427,6 +427,7 @@ struct ata_queued_cmd {
 	int			dma_dir;
 
 	unsigned int		pad_len;
+	unsigned int		sect_size;
 
 	unsigned int		nbytes;
 	unsigned int		curbytes;
@@ -1182,6 +1183,7 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
 	qc->n_elem = 0;
 	qc->err_mask = 0;
 	qc->pad_len = 0;
+	qc->sect_size = ATA_SECT_SIZE;
 
 	ata_tf_init(qc->dev, &qc->tf);
 

From eb4a2c7f03db06dda0370591c958fa5a62ff2ec3 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 11 Apr 2007 00:04:20 +0100
Subject: [PATCH 52/86] pata: cable methods

Versus upstream as requested

Last of the trivial switches to cable_detect methods.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ata_generic.c  | 32 +------------
 drivers/ata/ata_piix.c     | 55 ++++------------------
 drivers/ata/pata_amd.c     | 94 +++++++++++++++++++-------------------
 drivers/ata/pata_cs5535.c  | 24 +++-------
 drivers/ata/pata_cypress.c | 14 +-----
 drivers/ata/pata_hpt366.c  |  1 -
 6 files changed, 67 insertions(+), 153 deletions(-)

diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index d8e79882b880..92a491ddd030 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -32,35 +32,6 @@
  *	A generic parallel ATA driver using libata
  */
 
-/**
- *	generic_pre_reset		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generic probe init
- */
-
-static int generic_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-
-/**
- *	generic_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *	@classes:
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-
-static void generic_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, generic_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	generic_set_mode	-	mode setting
  *	@ap: interface to set up
@@ -144,8 +115,9 @@ static struct ata_port_operations generic_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= generic_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a2c5756c69b6..55d306a3e538 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -93,7 +93,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"2.10ac1"
+#define DRV_VERSION	"2.11"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
@@ -155,11 +155,11 @@ struct piix_host_priv {
 static int piix_init_one (struct pci_dev *pdev,
 				    const struct pci_device_id *ent);
 static void piix_pata_error_handler(struct ata_port *ap);
-static void ich_pata_error_handler(struct ata_port *ap);
 static void piix_sata_error_handler(struct ata_port *ap);
 static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
 static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev);
+static int ich_pata_cable_detect(struct ata_port *ap);
 
 static unsigned int in_module_init = 1;
 
@@ -305,6 +305,7 @@ static const struct ata_port_operations piix_pata_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= piix_pata_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -336,8 +337,9 @@ static const struct ata_port_operations ich_pata_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ich_pata_error_handler,
+	.error_handler		= piix_pata_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ich_pata_cable_detect,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -586,7 +588,7 @@ static const struct ich_laptop ich_laptop[] = {
 };
 
 /**
- *	piix_pata_cbl_detect - Probe host controller cable detect info
+ *	ich_pata_cable_detect - Probe host controller cable detect info
  *	@ap: Port for which cable detect info is desired
  *
  *	Read 80c cable indicator from ATA PCI device's PCI config
@@ -596,23 +598,18 @@ static const struct ich_laptop ich_laptop[] = {
  *	None (inherited from caller).
  */
 
-static void ich_pata_cbl_detect(struct ata_port *ap)
+static int ich_pata_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	const struct ich_laptop *lap = &ich_laptop[0];
 	u8 tmp, mask;
 
-	/* no 80c support in host controller? */
-	if ((ap->udma_mask & ~ATA_UDMA_MASK_40C) == 0)
-		goto cbl40;
-
 	/* Check for specials - Acer Aspire 5602WLMi */
 	while (lap->device) {
 		if (lap->device == pdev->device &&
 		    lap->subvendor == pdev->subsystem_vendor &&
 		    lap->subdevice == pdev->subsystem_device) {
-			ap->cbl = ATA_CBL_PATA40_SHORT;
-		    	return;
+			return ATA_CBL_PATA40_SHORT;
 		}
 		lap++;
 	}
@@ -621,20 +618,14 @@ static void ich_pata_cbl_detect(struct ata_port *ap)
 	mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
 	pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
 	if ((tmp & mask) == 0)
-		goto cbl40;
-
-	ap->cbl = ATA_CBL_PATA80;
-	return;
-
-cbl40:
-	ap->cbl = ATA_CBL_PATA40;
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
 /**
  *	piix_pata_prereset - prereset for PATA host controller
  *	@ap: Target port
  *
- *
  *	LOCKING:
  *	None (inherited from caller).
  */
@@ -644,8 +635,6 @@ static int piix_pata_prereset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -656,30 +645,6 @@ static void piix_pata_error_handler(struct ata_port *ap)
 }
 
 
-/**
- *	ich_pata_prereset - prereset for PATA host controller
- *	@ap: Target port
- *
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-static int ich_pata_prereset(struct ata_port *ap)
-{
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-	if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
-		return -ENOENT;
-	ich_pata_cbl_detect(ap);
-	return ata_std_prereset(ap);
-}
-
-static void ich_pata_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ich_pata_prereset, ata_std_softreset, NULL,
-			   ata_std_postreset);
-}
-
 static void piix_sata_error_handler(struct ata_port *ap)
 {
 	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 18381762908b..5a77e4e60a42 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.8"
+#define DRV_VERSION "0.3.8"
 
 /**
  *	timing_setup		-	shared timing computation and load
@@ -119,32 +119,25 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
 }
 
 /**
- *	amd_probe_init		-	cable detection
+ *	amd_probe_init		-	perform reset handling
  *	@ap: ATA port
  *
- *	Perform cable detection. The BIOS stores this in PCI config
- *	space for us.
+ *	Reset sequence checking enable bits to see which ports are
+ *	active.
  */
 
 static int amd_pre_reset(struct ata_port *ap)
 {
-	static const u32 bitmask[2] = {0x03, 0x0C};
 	static const struct pci_bits amd_enable_bits[] = {
 		{ 0x40, 1, 0x02, 0x02 },
 		{ 0x40, 1, 0x01, 0x01 }
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 ata66;
 
 	if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	pci_read_config_byte(pdev, 0x42, &ata66);
-	if (ata66 & bitmask[ap->port_no])
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 
 }
@@ -156,28 +149,16 @@ static void amd_error_handler(struct ata_port *ap)
 				      ata_std_postreset);
 }
 
-static int amd_early_pre_reset(struct ata_port *ap)
+static int amd_cable_detect(struct ata_port *ap)
 {
+	static const u32 bitmask[2] = {0x03, 0x0C};
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	static struct pci_bits amd_enable_bits[] = {
-		{ 0x40, 1, 0x02, 0x02 },
-		{ 0x40, 1, 0x01, 0x01 }
-	};
+	u8 ata66;
 
-	if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
-		return -ENOENT;
-
-	/* No host side cable detection */
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-
-}
-
-static void amd_early_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, amd_early_pre_reset,
-			       ata_std_softreset, NULL,
-			       ata_std_postreset);
+	pci_read_config_byte(pdev, 0x42, &ata66);
+	if (ata66 & bitmask[ap->port_no])
+		return ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
 }
 
 /**
@@ -247,31 +228,16 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  */
 
 static int nv_pre_reset(struct ata_port *ap) {
-	static const u8 bitmask[2] = {0x03, 0x0C};
 	static const struct pci_bits nv_enable_bits[] = {
 		{ 0x50, 1, 0x02, 0x02 },
 		{ 0x50, 1, 0x01, 0x01 }
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 ata66;
-	u16 udma;
 
 	if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	pci_read_config_byte(pdev, 0x52, &ata66);
-	if (ata66 & bitmask[ap->port_no])
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
-
-	/* We now have to double check because the Nvidia boxes BIOS
-	   doesn't always set the cable bits but does set mode bits */
-
-	pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
-	if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
-		ap->cbl = ATA_CBL_PATA80;
 	return ata_std_prereset(ap);
 }
 
@@ -281,6 +247,29 @@ static void nv_error_handler(struct ata_port *ap)
 			       ata_std_softreset, NULL,
 			       ata_std_postreset);
 }
+
+static int nv_cable_detect(struct ata_port *ap)
+{
+	static const u8 bitmask[2] = {0x03, 0x0C};
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 ata66;
+	u16 udma;
+	int cbl;
+
+	pci_read_config_byte(pdev, 0x52, &ata66);
+	if (ata66 & bitmask[ap->port_no])
+		cbl = ATA_CBL_PATA80;
+	else
+		cbl = ATA_CBL_PATA40;
+
+ 	/* We now have to double check because the Nvidia boxes BIOS
+ 	   doesn't always set the cable bits but does set mode bits */
+ 	pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
+ 	if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
+		cbl = ATA_CBL_PATA80;
+	return cbl;
+}
+
 /**
  *	nv100_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -353,8 +342,9 @@ static struct ata_port_operations amd33_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= amd_early_error_handler,
+	.error_handler	= amd_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -387,8 +377,9 @@ static struct ata_port_operations amd66_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= amd_early_error_handler,
+	.error_handler	= amd_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -423,6 +414,7 @@ static struct ata_port_operations amd100_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= amd_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_unknown,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -457,6 +449,7 @@ static struct ata_port_operations amd133_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= amd_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= amd_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -491,6 +484,7 @@ static struct ata_port_operations nv100_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= nv_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= nv_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -525,6 +519,7 @@ static struct ata_port_operations nv133_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= nv_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= nv_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -644,6 +639,11 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (type == 1 && rev > 0x7)
 		type = 2;
 
+#if defined(CONFIG_ATA_ACPI)
+	/* Prefer the ACPI driver for Nvidia hardware */
+	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && ata_pata_acpi_present(pdev))
+		return -ENODEV;
+#endif
 	/* Check for AMD7411 */
 	if (type == 3)
 		/* FIFO is broken */
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 1572e5c9031a..08cccc9c659b 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -70,36 +70,23 @@
 #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )
 
 /**
- *	cs5535_pre_reset	-	detect cable type
+ *	cs5535_cable_detect	-	detect cable type
  *	@ap: Port to detect on
  *
  *	Perform cable detection for ATA66 capable cable. Return a libata
  *	cable type.
  */
 
-static int cs5535_pre_reset(struct ata_port *ap)
+static int cs5535_cable_detect(struct ata_port *ap)
 {
 	u8 cable;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
 	if (cable & 1)
-		ap->cbl = ATA_CBL_PATA80;
+		return ATA_CBL_PATA80;
 	else
-		ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	cs5535_error_handler		-	reset/probe
- *	@ap: Port to reset
- *
- *	Reset and configure a port
- */
-
-static void cs5535_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, cs5535_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+		return ATA_CBL_PATA40;
 }
 
 /**
@@ -205,8 +192,9 @@ static struct ata_port_operations cs5535_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cs5535_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= cs5535_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index f69dde5f7066..6ec049c3b1dc 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -41,17 +41,6 @@ enum {
 	CY82_INDEX_TIMEOUT	= 0x32
 };
 
-static int cy82c693_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static void cy82c693_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	cy82c693_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -156,8 +145,9 @@ static struct ata_port_operations cy82c693_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cy82c693_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index c3e5ea35e0f8..93cfa6d300a5 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -169,7 +169,6 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons
 
 /**
  *	hpt366_filter	-	mode selection filter
- *	@ap: ATA interface
  *	@adev: ATA device
  *
  *	Block UDMA on devices that cause trouble with this controller.

From ad648c08835851b1b447b08144013e86aceafe5f Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 11 Apr 2007 00:14:09 +0100
Subject: [PATCH 53/86] pata_winbond

Not a PCI device so doesn't need PCI includes

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_winbond.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 519943239dbf..434f14f6f869 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -8,7 +8,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>

From 9bedb799f2d270dc6434473fcab745adc930a85b Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 11 Apr 2007 00:19:00 +0100
Subject: [PATCH 54/86] pata_pdc2027x: Updates

Signed-off-by: Alan Cox <alan@redhat.com>

Correct missing modefilter (crash if BAR4 unassigned)
Use Cable Detect method
Wrap ->set_mode instead ready for ->post_set_mode removal
Maxtor errata as per Jeff Garzik report
Remove duplicated private udma_mask hacking
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_pdc2027x.c | 60 +++++++++++++++++++++++++++++--------
 1 file changed, 47 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 93bcdadb7be3..8261f4f8c1dc 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_pdc2027x"
-#define DRV_VERSION	"0.8"
+#define DRV_VERSION	"0.9"
 #undef PDC_DEBUG
 
 #ifdef PDC_DEBUG
@@ -66,8 +66,10 @@ static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *e
 static void pdc2027x_error_handler(struct ata_port *ap);
 static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
 static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
-static void pdc2027x_post_set_mode(struct ata_port *ap);
 static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
+static int pdc2027x_cable_detect(struct ata_port *ap);
+static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed);
 
 /*
  * ATA Timing Tables based on 133MHz controller clock.
@@ -146,6 +148,7 @@ static struct scsi_host_template pdc2027x_sht = {
 
 static struct ata_port_operations pdc2027x_pata100_ops = {
 	.port_disable		= ata_port_disable,
+	.mode_filter		= ata_pci_default_filter,
 
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
@@ -166,6 +169,7 @@ static struct ata_port_operations pdc2027x_pata100_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= pdc2027x_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= pdc2027x_cable_detect,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -179,7 +183,8 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
 	.port_disable		= ata_port_disable,
 	.set_piomode		= pdc2027x_set_piomode,
 	.set_dmamode		= pdc2027x_set_dmamode,
-	.post_set_mode		= pdc2027x_post_set_mode,
+	.set_mode		= pdc2027x_set_mode,
+	.mode_filter		= pdc2027x_mode_filter,
 
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
@@ -200,6 +205,7 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= pdc2027x_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= pdc2027x_cable_detect,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
@@ -261,7 +267,7 @@ static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *ade
 }
 
 /**
- *	pdc2027x_pata_cbl_detect - Probe host controller cable detect info
+ *	pdc2027x_pata_cable_detect - Probe host controller cable detect info
  *	@ap: Port for which cable detect info is desired
  *
  *	Read 80c cable indicator from Promise extended register.
@@ -270,7 +276,7 @@ static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *ade
  *	LOCKING:
  *	None (inherited from caller).
  */
-static void pdc2027x_cbl_detect(struct ata_port *ap)
+static int pdc2027x_cable_detect(struct ata_port *ap)
 {
 	u32 cgcr;
 
@@ -281,13 +287,10 @@ static void pdc2027x_cbl_detect(struct ata_port *ap)
 
 	PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no);
 
-	ap->cbl = ATA_CBL_PATA80;
-	return;
-
+	return ATA_CBL_PATA80;
 cbl40:
 	printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no);
-	ap->cbl = ATA_CBL_PATA40;
-	ap->udma_mask &= ATA_UDMA_MASK_40C;
+	return ATA_CBL_PATA40;
 }
 
 /**
@@ -314,7 +317,6 @@ static int pdc2027x_prereset(struct ata_port *ap)
 	/* Check whether port enabled */
 	if (!pdc2027x_port_enabled(ap))
 		return -ENOENT;
-	pdc2027x_cbl_detect(ap);
 	return ata_std_prereset(ap);
 }
 
@@ -333,6 +335,32 @@ static void pdc2027x_error_handler(struct ata_port *ap)
 	ata_bmdma_drive_eh(ap, pdc2027x_prereset, ata_std_softreset, NULL, ata_std_postreset);
 }
 
+/**
+ *	pdc2720x_mode_filter	-	mode selection filter
+ *	@adev: ATA device
+ *	@mask: list of modes proposed
+ *
+ *	Block UDMA on devices that cause trouble with this controller.
+ */
+
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+	unsigned char model_num[ATA_ID_PROD_LEN + 1];
+	struct ata_device *pair = ata_dev_pair(adev);
+
+	if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
+		return ata_pci_default_filter(adev, mask);
+
+	/* Check for slave of a Maxtor at UDMA6 */
+	ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
+			  ATA_ID_PROD_LEN + 1);
+	/* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
+	if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+		mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
+
+	return ata_pci_default_filter(adev, mask);
+}
+
 /**
  *	pdc2027x_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port to configure
@@ -444,17 +472,22 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	pdc2027x_post_set_mode - Set the timing registers back to correct values.
+ *	pdc2027x_set_mode - Set the timing registers back to correct values.
  *	@ap: Port to configure
+ *	@r_failed: Returned device for failure
  *
  *	The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
  *	automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
  *	This function overwrites the possibly incorrect values set by the hardware to be correct.
  */
-static void pdc2027x_post_set_mode(struct ata_port *ap)
+static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed)
 {
 	int i;
 
+	i = ata_do_set_mode(ap, r_failed);
+	if (i < 0)
+		return i;
+
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
 		struct ata_device *dev = &ap->device[i];
 
@@ -476,6 +509,7 @@ static void pdc2027x_post_set_mode(struct ata_port *ap)
 			}
 		}
 	}
+	return 0;
 }
 
 /**

From ce2d3abc292c1eecd9ddc6f03391a0a46c6561dc Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sat, 7 Apr 2007 14:29:51 +0200
Subject: [PATCH 55/86] sata_promise: fix error decode regression

Promise ATA ports should always be reset by pdc_reset_port()
when errors are detected, but the recent error reason decoding
update to sata_promise replaced that reset with a freeze.

This patch changes the error detection to do a reset again.
This makes the error decoding update safer, as it now only
adds error decoding without changing any other behaviour.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_promise.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index baa836881b03..a7916d72c4ca 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,7 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"2.04"
+#define DRV_VERSION	"2.05"
 
 
 enum {
@@ -650,9 +650,12 @@ static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc,
 			   | PDC_PCI_SYS_ERR | PDC1_PCI_PARITY_ERR))
 		ac_err_mask |= AC_ERR_HOST_BUS;
 
-	ehi->action |= ATA_EH_SOFTRESET;
+	if (sata_scr_valid(ap))
+		ehi->serror |= pdc_sata_scr_read(ap, SCR_ERROR);
+
 	qc->err_mask |= ac_err_mask;
-	ata_port_freeze(ap);
+
+	pdc_reset_port(ap);
 }
 
 static inline unsigned int pdc_host_intr( struct ata_port *ap,

From d447df140d0f07a02bd221cb42eb0b61bce16042 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Sun, 18 Mar 2007 22:15:33 +0900
Subject: [PATCH 56/86] ahci: implement ata_save/restore_initial_config()

There are several registers which describe how the controller is
configured.  These registers are sometimes implemented as r/w
registers which are configured by firmware and get cleared on
controller reset or after suspend/resume cycle.  ahci saved and
restored those values inside ahci_reset_controller() which is a bit
messy and doesn't work over suspend/resume cycle.

This patch implements ahci_save/restore_initial_config().  The save
function is called during driver initialization and saves cap and
port_map to hpriv.  The restore function is called after the
controller is reset to restore the initial values.

Sometimes the initial firmware values are inconsistent and need to be
fixed up.  This is handled by ahci_save_initial_config().  For this,
there are two versions of saved registers.  One to write back to the
hardware register, the other to use during driver operation.  This is
necessary to keep ahci's behavior unchanged (write back fixed up
port_map while keeping cap as-is).

This patch makes ahci save the register values once before the first
controller reset, not after it's been reset.  Also, the same stored
values are used written back after each reset, so the register values
are properly recovered after suspend/resume cycle.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ahci.c | 95 +++++++++++++++++++++++++++++++++++-----------
 1 file changed, 72 insertions(+), 23 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fd27227771b4..c31b66366326 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -188,8 +188,10 @@ struct ahci_sg {
 };
 
 struct ahci_host_priv {
-	u32			cap;	/* cache of HOST_CAP register */
-	u32			port_map; /* cache of HOST_PORTS_IMPL reg */
+	u32			cap;		/* cap to use */
+	u32			port_map;	/* port map to use */
+	u32			saved_cap;	/* saved initial cap */
+	u32			saved_port_map;	/* saved initial port_map */
 };
 
 struct ahci_port_priv {
@@ -477,6 +479,65 @@ static inline void __iomem *ahci_port_base(void __iomem *base,
 	return base + 0x100 + (port * 0x80);
 }
 
+/**
+ *	ahci_save_initial_config - Save and fixup initial config values
+ *	@probe_ent: probe_ent of target device
+ *
+ *	Some registers containing configuration info might be setup by
+ *	BIOS and might be cleared on reset.  This function saves the
+ *	initial values of those registers into @hpriv such that they
+ *	can be restored after controller reset.
+ *
+ *	If inconsistent, config values are fixed up by this function.
+ *
+ *	LOCKING:
+ *	None.
+ */
+static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
+{
+	struct ahci_host_priv *hpriv = probe_ent->private_data;
+	void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
+	u32 cap, port_map;
+
+	/* Values prefixed with saved_ are written back to host after
+	 * reset.  Values without are used for driver operation.
+	 */
+	hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
+	hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
+
+	/* fixup zero port_map */
+	if (!port_map) {
+		port_map = (1 << ahci_nr_ports(hpriv->cap)) - 1;
+		dev_printk(KERN_WARNING, probe_ent->dev,
+			   "PORTS_IMPL is zero, forcing 0x%x\n", port_map);
+
+		/* write the fixed up value to the PI register */
+		hpriv->saved_port_map = port_map;
+	}
+
+	/* record values to use during operation */
+	hpriv->cap = cap;
+	hpriv->port_map = port_map;
+}
+
+/**
+ *	ahci_restore_initial_config - Restore initial config
+ *	@mmio: MMIO base for the host
+ *	@hpriv: host private data
+ *
+ *	Restore initial config stored by ahci_save_initial_config().
+ *
+ *	LOCKING:
+ *	None.
+ */
+static void ahci_restore_initial_config(void __iomem *mmio,
+					struct ahci_host_priv *hpriv)
+{
+	writel(hpriv->saved_cap, mmio + HOST_CAP);
+	writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
+	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
+}
+
 static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg_in)
 {
 	unsigned int sc_reg;
@@ -653,12 +714,10 @@ static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg)
 	return 0;
 }
 
-static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
+static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev,
+				 struct ahci_host_priv *hpriv)
 {
-	u32 cap_save, impl_save, tmp;
-
-	cap_save = readl(mmio + HOST_CAP);
-	impl_save = readl(mmio + HOST_PORTS_IMPL);
+	u32 tmp;
 
 	/* global controller reset */
 	tmp = readl(mmio + HOST_CTL);
@@ -683,18 +742,8 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev)
 	writel(HOST_AHCI_EN, mmio + HOST_CTL);
 	(void) readl(mmio + HOST_CTL);	/* flush */
 
-	/* These write-once registers are normally cleared on reset.
-	 * Restore BIOS values... which we HOPE were present before
-	 * reset.
-	 */
-	if (!impl_save) {
-		impl_save = (1 << ahci_nr_ports(cap_save)) - 1;
-		dev_printk(KERN_WARNING, &pdev->dev,
-			   "PORTS_IMPL is zero, forcing 0x%x\n", impl_save);
-	}
-	writel(cap_save, mmio + HOST_CAP);
-	writel(impl_save, mmio + HOST_PORTS_IMPL);
-	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
+	/* some registers might be cleared on reset.  restore initial values */
+	ahci_restore_initial_config(mmio, hpriv);
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		u16 tmp16;
@@ -1432,7 +1481,7 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
 		return rc;
 
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_reset_controller(mmio, pdev);
+		rc = ahci_reset_controller(mmio, pdev, hpriv);
 		if (rc)
 			return rc;
 
@@ -1543,12 +1592,10 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 	unsigned int i, cap_n_ports, using_dac;
 	int rc;
 
-	rc = ahci_reset_controller(mmio, pdev);
+	rc = ahci_reset_controller(mmio, pdev, hpriv);
 	if (rc)
 		return rc;
 
-	hpriv->cap = readl(mmio + HOST_CAP);
-	hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
 	cap_n_ports = ahci_nr_ports(hpriv->cap);
 
 	VPRINTK("cap 0x%x  port_map 0x%x  n_ports %d\n",
@@ -1739,6 +1786,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	probe_ent->private_data = hpriv;
 
 	/* initialize adapter */
+	ahci_save_initial_config(probe_ent);
+
 	rc = ahci_host_init(probe_ent);
 	if (rc)
 		return rc;

From 17199b187b5d9a22f2ec835c9fdb38302501b918 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Sun, 18 Mar 2007 22:26:53 +0900
Subject: [PATCH 57/86] ahci: move port_map handling to
 ahci_save_initial_config()

Move cross checking between port_map and cap.n_ports into
ahci_save_initial_config().  After save_initial_config is done,
hpriv->port_map is always setup properly.

Tested on JMB363, ICH7 and ICH8 (with dummy ports).

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ahci.c | 57 ++++++++++++++++++++++++----------------------
 1 file changed, 30 insertions(+), 27 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c31b66366326..fb9f69252939 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -498,6 +498,7 @@ static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
 	struct ahci_host_priv *hpriv = probe_ent->private_data;
 	void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
 	u32 cap, port_map;
+	int i;
 
 	/* Values prefixed with saved_ are written back to host after
 	 * reset.  Values without are used for driver operation.
@@ -515,6 +516,31 @@ static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
 		hpriv->saved_port_map = port_map;
 	}
 
+	/* cross check port_map and cap.n_ports */
+	if (probe_ent->port_flags & AHCI_FLAG_HONOR_PI) {
+		u32 tmp_port_map = port_map;
+		int n_ports = ahci_nr_ports(cap);
+
+		for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) {
+			if (tmp_port_map & (1 << i)) {
+				n_ports--;
+				tmp_port_map &= ~(1 << i);
+			}
+		}
+
+		/* Whine if inconsistent.  No need to update cap.
+		 * port_map is used to determine number of ports.
+		 */
+		if (n_ports || tmp_port_map)
+			dev_printk(KERN_WARNING, probe_ent->dev,
+				   "nr_ports (%u) and implemented port map "
+				   "(0x%x) don't match\n",
+				   ahci_nr_ports(cap), port_map);
+	} else {
+		/* fabricate port_map from cap.nr_ports */
+		port_map = (1 << ahci_nr_ports(cap)) - 1;
+	}
+
 	/* record values to use during operation */
 	hpriv->cap = cap;
 	hpriv->port_map = port_map;
@@ -1589,41 +1615,18 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 	struct ahci_host_priv *hpriv = probe_ent->private_data;
 	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
 	void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
-	unsigned int i, cap_n_ports, using_dac;
+	unsigned int i, using_dac;
 	int rc;
 
 	rc = ahci_reset_controller(mmio, pdev, hpriv);
 	if (rc)
 		return rc;
 
-	cap_n_ports = ahci_nr_ports(hpriv->cap);
+	probe_ent->n_ports = fls(hpriv->port_map);
+	probe_ent->dummy_port_mask = ~hpriv->port_map;
 
 	VPRINTK("cap 0x%x  port_map 0x%x  n_ports %d\n",
-		hpriv->cap, hpriv->port_map, cap_n_ports);
-
-	if (probe_ent->port_flags & AHCI_FLAG_HONOR_PI) {
-		unsigned int n_ports = cap_n_ports;
-		u32 port_map = hpriv->port_map;
-		int max_port = 0;
-
-		for (i = 0; i < AHCI_MAX_PORTS && n_ports; i++) {
-			if (port_map & (1 << i)) {
-				n_ports--;
-				port_map &= ~(1 << i);
-				max_port = i;
-			} else
-				probe_ent->dummy_port_mask |= 1 << i;
-		}
-
-		if (n_ports || port_map)
-			dev_printk(KERN_WARNING, &pdev->dev,
-				   "nr_ports (%u) and implemented port map "
-				   "(0x%x) don't match\n",
-				   cap_n_ports, hpriv->port_map);
-
-		probe_ent->n_ports = max_port + 1;
-	} else
-		probe_ent->n_ports = cap_n_ports;
+		hpriv->cap, hpriv->port_map, probe_ent->n_ports);
 
 	using_dac = hpriv->cap & HOST_CAP_64;
 	if (using_dac &&

From 55a6adeea4077521b4bba1dfe674f5835157a00b Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Fri, 9 Mar 2007 19:43:35 +0900
Subject: [PATCH 58/86] libata: fix native mode disabled port handling

Disabled port handling in ata_pci_init_native_mode() is slightly
broken in that it may end up using the wrong port_info.  This patch
updates it such that disables ports are made dummy as done in the
legacy and other cases.

While at it, fix indentation in ata_resources_present().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-sff.c | 62 +++++++++++++++++++++++-----------------
 1 file changed, 35 insertions(+), 27 deletions(-)

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 0a194660fd21..93cc96782165 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -526,8 +526,8 @@ static int ata_resources_present(struct pci_dev *pdev, int port)
 	port = port * 2;
 	for (i = 0; i < 2; i ++) {
 		if (pci_resource_start(pdev, port + i) == 0 ||
-			pci_resource_len(pdev, port + i) == 0)
-		return 0;
+		    pci_resource_len(pdev, port + i) == 0)
+			return 0;
 	}
 	return 1;
 }
@@ -554,11 +554,26 @@ struct ata_probe_ent *
 ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
 {
 	struct ata_probe_ent *probe_ent;
-	int i, p = 0;
+	int i;
 	void __iomem * const *iomap;
 
+	/* Discard disabled ports.  Some controllers show their unused
+	 * channels this way.  Disabled ports will be made dummy.
+	 */
+	if (ata_resources_present(pdev, 0) == 0)
+		ports &= ~ATA_PORT_PRIMARY;
+	if (ata_resources_present(pdev, 1) == 0)
+		ports &= ~ATA_PORT_SECONDARY;
+
+	if (!ports) {
+		dev_printk(KERN_ERR, &pdev->dev, "no available port\n");
+		return NULL;
+	}
+
 	/* iomap BARs */
 	for (i = 0; i < 4; i++) {
+		if (!(ports & (1 << (i / 2))))
+			continue;
 		if (pcim_iomap(pdev, i, 0) == NULL) {
 			dev_printk(KERN_ERR, &pdev->dev,
 				   "failed to iomap PCI BAR %d\n", i);
@@ -574,48 +589,41 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
 	if (!probe_ent)
 		return NULL;
 
+	probe_ent->n_ports = 2;
 	probe_ent->irq = pdev->irq;
 	probe_ent->irq_flags = IRQF_SHARED;
 
-	/* Discard disabled ports. Some controllers show their
-	   unused channels this way */
-	if (ata_resources_present(pdev, 0) == 0)
-		ports &= ~ATA_PORT_PRIMARY;
-	if (ata_resources_present(pdev, 1) == 0)
-		ports &= ~ATA_PORT_SECONDARY;
-
 	if (ports & ATA_PORT_PRIMARY) {
-		probe_ent->port[p].cmd_addr = iomap[0];
-		probe_ent->port[p].altstatus_addr =
-		probe_ent->port[p].ctl_addr = (void __iomem *)
+		probe_ent->port[0].cmd_addr = iomap[0];
+		probe_ent->port[0].altstatus_addr =
+		probe_ent->port[0].ctl_addr = (void __iomem *)
 			((unsigned long)iomap[1] | ATA_PCI_CTL_OFS);
 		if (iomap[4]) {
-			if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+			if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
 			    (ioread8(iomap[4] + 2) & 0x80))
 				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-			probe_ent->port[p].bmdma_addr = iomap[4];
+			probe_ent->port[0].bmdma_addr = iomap[4];
 		}
-		ata_std_ports(&probe_ent->port[p]);
-		p++;
-	}
+		ata_std_ports(&probe_ent->port[0]);
+	} else
+		probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY;
 
 	if (ports & ATA_PORT_SECONDARY) {
-		probe_ent->port[p].cmd_addr = iomap[2];
-		probe_ent->port[p].altstatus_addr =
-		probe_ent->port[p].ctl_addr = (void __iomem *)
+		probe_ent->port[1].cmd_addr = iomap[2];
+		probe_ent->port[1].altstatus_addr =
+		probe_ent->port[1].ctl_addr = (void __iomem *)
 			((unsigned long)iomap[3] | ATA_PCI_CTL_OFS);
 		if (iomap[4]) {
-			if ((!(port[p]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+			if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
 			    (ioread8(iomap[4] + 10) & 0x80))
 				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-			probe_ent->port[p].bmdma_addr = iomap[4] + 8;
+			probe_ent->port[1].bmdma_addr = iomap[4] + 8;
 		}
-		ata_std_ports(&probe_ent->port[p]);
+		ata_std_ports(&probe_ent->port[1]);
 		probe_ent->pinfo2 = port[1];
-		p++;
-	}
+	} else
+		probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY;
 
-	probe_ent->n_ports = p;
 	return probe_ent;
 }
 

From a51d644af6eb0a93bc383e5f005faa445c87f335 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 20 Mar 2007 15:24:11 +0900
Subject: [PATCH 59/86] libata: improve AC_ERR_DEV handling for
 ->post_internal_cmd

->post_internal_cmd is simplified EH for internal commands.  Its
primary mission is to stop the controller such that no rogue memory
access or other activities occur after the internal command is
released.  It may provide error diagnostics by setting qc->err_mask
but this hasn't been a requirement.

To ignore SETXFER failure for CFA devices, libata needs to know
whether a command was failed by the device or for any other reason.
ie. internal command needs to get AC_ERR_DEV right.

This patch makes the following changes to AC_ERR_DEV handling and
->post_internal_cmd semantics to accomodate this need and simplify
callback implementation.

1. As long as the correct bits in the result TF registers are set,
   there is no need to set AC_ERR_DEV explicitly.  libata EH core
   takes care of that for both normal and internal commands.

2. The only requirement for ->post_internal_cmd() is to put the
   controller into quiescent state.  It needs not to set any err_mask.

3. ata_exec_internal_sg() performs minimal error analysis such that
   AC_ERR_DEV is automatically set as long as result_tf is filled
   correctly.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ahci.c          |  5 +----
 drivers/ata/libata-core.c   | 16 ++++++++++------
 drivers/ata/libata-eh.c     |  4 +++-
 drivers/ata/sata_inic162x.c |  2 +-
 drivers/ata/sata_promise.c  |  5 +----
 drivers/ata/sata_sil24.c    |  5 +----
 6 files changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fb9f69252939..cf39987a31c4 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1430,10 +1430,7 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
 	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
 	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 
-	if (qc->flags & ATA_QCFLAG_FAILED)
-		qc->err_mask |= AC_ERR_OTHER;
-
-	if (qc->err_mask) {
+	if (qc->flags & ATA_QCFLAG_FAILED) {
 		/* make DMA engine forget about the failed command */
 		ahci_stop_engine(port_mmio);
 		ahci_start_engine(port_mmio);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 96bf86f67388..2f2884b92434 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1270,12 +1270,16 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
 	if (ap->ops->post_internal_cmd)
 		ap->ops->post_internal_cmd(qc);
 
-	if ((qc->flags & ATA_QCFLAG_FAILED) && !qc->err_mask) {
-		if (ata_msg_warn(ap))
-			ata_dev_printk(dev, KERN_WARNING,
-				"zero err_mask for failed "
-				"internal command, assuming AC_ERR_OTHER\n");
-		qc->err_mask |= AC_ERR_OTHER;
+	/* perform minimal error analysis */
+	if (qc->flags & ATA_QCFLAG_FAILED) {
+		if (qc->result_tf.command & (ATA_ERR | ATA_DF))
+			qc->err_mask |= AC_ERR_DEV;
+
+		if (!qc->err_mask)
+			qc->err_mask |= AC_ERR_OTHER;
+
+		if (qc->err_mask & ~AC_ERR_OTHER)
+			qc->err_mask &= ~AC_ERR_OTHER;
 	}
 
 	/* finish up */
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 185876aba647..0dbee550f9e8 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1151,7 +1151,9 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 		return ATA_EH_SOFTRESET;
 	}
 
-	if (!(qc->err_mask & AC_ERR_DEV))
+	if (stat & (ATA_ERR | ATA_DF))
+		qc->err_mask |= AC_ERR_DEV;
+	else
 		return 0;
 
 	switch (qc->dev->class) {
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 11c3079ab6cc..ca4092aaae5b 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -488,7 +488,7 @@ static void inic_error_handler(struct ata_port *ap)
 static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	/* make DMA engine forget about the failed command */
-	if (qc->err_mask)
+	if (qc->flags & ATA_QCFLAG_FAILED)
 		inic_reset_port(inic_port_base(qc->ap));
 }
 
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index a7916d72c4ca..8afde4a9ca7e 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -622,11 +622,8 @@ static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 
-	if (qc->flags & ATA_QCFLAG_FAILED)
-		qc->err_mask |= AC_ERR_OTHER;
-
 	/* make DMA engine forget about the failed command */
-	if (qc->err_mask)
+	if (qc->flags & ATA_QCFLAG_FAILED)
 		pdc_reset_port(ap);
 }
 
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 6698c746e624..4f522ec04049 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -924,11 +924,8 @@ static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 
-	if (qc->flags & ATA_QCFLAG_FAILED)
-		qc->err_mask |= AC_ERR_OTHER;
-
 	/* make DMA engine forget about the failed command */
-	if (qc->err_mask)
+	if (qc->flags & ATA_QCFLAG_FAILED)
 		sil24_init_port(ap);
 }
 

From c65ec1c25dc23123040efdc4ada46071431723e3 Mon Sep 17 00:00:00 2001
From: Conke Hu <conke.hu@gmail.com>
Date: Wed, 11 Apr 2007 18:23:14 +0800
Subject: [PATCH 60/86] ahci.c: remove non-existing SB600 raid id (re-send)

    SB600 RAID and SB600 SATA is the same controller and share the
same PCI ID 0x4380. There is no such PCI ID 0x4381.

    Signed-off-by: Conke Hu <conke.hu@gmail.com>
 ---------

Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ahci.c      | 3 +--
 include/linux/pci_ids.h | 1 -
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index cf39987a31c4..436de03650ec 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -415,8 +415,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
 
 	/* ATI */
-	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 non-raid */
-	{ PCI_VDEVICE(ATI, 0x4381), board_ahci }, /* ATI SB600 raid */
+	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
 
 	/* VIA */
 	{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 600308fdf9ce..5f21b0f68b42 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -368,7 +368,6 @@
 #define PCI_DEVICE_ID_ATI_IXP400_SATA   0x4379
 #define PCI_DEVICE_ID_ATI_IXP400_SATA2	0x437a
 #define PCI_DEVICE_ID_ATI_IXP600_SATA	0x4380
-#define PCI_DEVICE_ID_ATI_IXP600_SRAID	0x4381
 #define PCI_DEVICE_ID_ATI_IXP600_SMBUS	0x4385
 #define PCI_DEVICE_ID_ATI_IXP600_IDE	0x438c
 

From 03ec52dea0f3c615b1b502672c189f296842f7dd Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Thu, 12 Apr 2007 13:38:11 +0900
Subject: [PATCH 61/86] libata: kill type mismatch compile warning

kill the following compile warning.

drivers/ata/libata-core.c:1786: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2f2884b92434..f368387829ca 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1787,7 +1787,8 @@ int ata_dev_configure(struct ata_device *dev)
 	}
 
 	if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
-		dev->max_sectors = min(ATA_MAX_SECTORS_128, dev->max_sectors);
+		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
+					 dev->max_sectors);
 
 	/* limit ATAPI DMA to R/W commands only */
 	if (ata_device_blacklisted(dev) & ATA_HORKAGE_DMA_RW_ONLY)

From bf33554290bb6a6b2bd8827076f89fb17fb19e3d Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Wed, 11 Apr 2007 17:27:14 +0900
Subject: [PATCH 62/86] ahci: add PCI ID for new VIA chip

Add PCI ID for new VIA chip.  Original patch is from Maarten Vanraes.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Maarten Vanraes <maarten.vanraes@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ahci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 436de03650ec..fe4f0fe36bfb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -419,6 +419,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 
 	/* VIA */
 	{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
+	{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
 
 	/* NVIDIA */
 	{ PCI_VDEVICE(NVIDIA, 0x044c), board_ahci },		/* MCP65 */

From 4911487a34baa89ec5b5f09a661761b73091fbec Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:06 +0900
Subject: [PATCH 63/86] libata: allocate ap separately from shost

Don't embed ap inside shost.  Allocate it separately and point it back
from shosts's hostdata.  This makes port allocation more flexible and
allows regular ATA and SAS share host alloc/init paths.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 19 ++++++++++++++-----
 include/linux/libata.h    |  2 +-
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f368387829ca..c831c9efee60 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5792,13 +5792,18 @@ static struct ata_port * ata_port_add(const struct ata_probe_ent *ent,
 		return NULL;
 	}
 
-	shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port));
-	if (!shost)
+	ap = kzalloc(sizeof(struct ata_port), GFP_KERNEL);
+	if (!ap)
 		return NULL;
 
-	shost->transportt = &ata_scsi_transport_template;
+	shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port *));
+	if (!shost) {
+		kfree(ap);
+		return NULL;
+	}
 
-	ap = ata_shost_to_port(shost);
+	*(struct ata_port **)&shost->hostdata[0] = ap;
+	shost->transportt = &ata_scsi_transport_template;
 
 	ata_port_init(ap, host, ent, port_no);
 	ata_port_init_shost(ap, shost);
@@ -5824,9 +5829,13 @@ static void ata_host_release(struct device *gendev, void *res)
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
-		if (ap)
+		if (!ap)
+			continue;
+
+		if (ap->scsi_host)
 			scsi_host_put(ap->scsi_host);
 
+		kfree(ap);
 		host->ports[i] = NULL;
 	}
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 12237d4b9f9b..ced9dd54035e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1231,7 +1231,7 @@ static inline void ata_pad_free(struct ata_port *ap, struct device *dev)
 
 static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host)
 {
-	return (struct ata_port *) &host->hostdata[0];
+	return *(struct ata_port **)&host->hostdata[0];
 }
 
 #endif /* __LINUX_LIBATA_H__ */

From ecef7253235e7a9365afe08a508e11bed91c1c11 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:06 +0900
Subject: [PATCH 64/86] libata: separate out ata_host_start()

Separate out ata_host_start() from ata_device_add().  ata_host_start()
calls ->port_start on each port if available and freezes the port.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 74 ++++++++++++++++++++++++++++++++-------
 include/linux/libata.h    |  2 ++
 2 files changed, 63 insertions(+), 13 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c831c9efee60..aea766a48e05 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5819,11 +5819,14 @@ static void ata_host_release(struct device *gendev, void *res)
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
-		if (ap && ap->ops->port_stop)
+		if (!ap)
+			continue;
+
+		if ((host->flags & ATA_HOST_STARTED) && ap->ops->port_stop)
 			ap->ops->port_stop(ap);
 	}
 
-	if (host->ops->host_stop)
+	if ((host->flags & ATA_HOST_STARTED) && host->ops->host_stop)
 		host->ops->host_stop(host);
 
 	for (i = 0; i < host->n_ports; i++) {
@@ -5842,6 +5845,56 @@ static void ata_host_release(struct device *gendev, void *res)
 	dev_set_drvdata(gendev, NULL);
 }
 
+/**
+ *	ata_host_start - start and freeze ports of an ATA host
+ *	@host: ATA host to start ports for
+ *
+ *	Start and then freeze ports of @host.  Started status is
+ *	recorded in host->flags, so this function can be called
+ *	multiple times.  Ports are guaranteed to get started only
+ *	once.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 if all ports are started successfully, -errno otherwise.
+ */
+int ata_host_start(struct ata_host *host)
+{
+	int i, rc;
+
+	if (host->flags & ATA_HOST_STARTED)
+		return 0;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		if (ap->ops->port_start) {
+			rc = ap->ops->port_start(ap);
+			if (rc) {
+				ata_port_printk(ap, KERN_ERR, "failed to "
+						"start port (errno=%d)\n", rc);
+				goto err_out;
+			}
+		}
+
+		ata_eh_freeze_port(ap);
+	}
+
+	host->flags |= ATA_HOST_STARTED;
+	return 0;
+
+ err_out:
+	while (--i >= 0) {
+		struct ata_port *ap = host->ports[i];
+
+		if (ap->ops->port_stop)
+			ap->ops->port_stop(ap);
+	}
+	return rc;
+}
+
 /**
  *	ata_sas_host_init - Initialize a host struct
  *	@host:	host to initialize
@@ -5931,14 +5984,6 @@ int ata_device_add(const struct ata_probe_ent *ent)
 			continue;
 		}
 
-		/* start port */
-		rc = ap->ops->port_start(ap);
-		if (rc) {
-			host->ports[i] = NULL;
-			scsi_host_put(ap->scsi_host);
-			goto err_out;
-		}
-
 		/* Report the secondary IRQ for second channel legacy */
 		if (i == 1 && ent->irq2)
 			irq_line = ent->irq2;
@@ -5956,11 +6001,13 @@ int ata_device_add(const struct ata_probe_ent *ent)
 				ap->ioaddr.ctl_addr,
 				ap->ioaddr.bmdma_addr,
 				irq_line);
-
-		/* freeze port before requesting IRQ */
-		ata_eh_freeze_port(ap);
 	}
 
+	/* start ports */
+	rc = ata_host_start(host);
+	if (rc)
+		goto err_out;
+
 	/* obtain irq, that may be shared between channels */
 	rc = devm_request_irq(dev, ent->irq, ent->port_ops->irq_handler,
 			      ent->irq_flags, DRV_NAME, host);
@@ -6446,6 +6493,7 @@ EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_std_ports);
 EXPORT_SYMBOL_GPL(ata_host_init);
+EXPORT_SYMBOL_GPL(ata_host_start);
 EXPORT_SYMBOL_GPL(ata_device_add);
 EXPORT_SYMBOL_GPL(ata_host_detach);
 EXPORT_SYMBOL_GPL(ata_sg_init);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ced9dd54035e..bda26e86f05f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -210,6 +210,7 @@ enum {
 
 	/* host set flags */
 	ATA_HOST_SIMPLEX	= (1 << 0),	/* Host is simplex, one DMA channel per host only */
+	ATA_HOST_STARTED	= (1 << 1),	/* Host started */
 
 	/* various lengths of time */
 	ATA_TMOUT_BOOT		= 30 * HZ,	/* heuristic */
@@ -732,6 +733,7 @@ extern int ata_pci_device_resume(struct pci_dev *pdev);
 #endif
 extern int ata_pci_clear_simplex(struct pci_dev *pdev);
 #endif /* CONFIG_PCI */
+extern int ata_host_start(struct ata_host *host);
 extern int ata_device_add(const struct ata_probe_ent *ent);
 extern void ata_host_detach(struct ata_host *host);
 extern void ata_host_init(struct ata_host *, struct device *,

From f31871951b38daf2d7ca17daad59fdb735062da3 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:07 +0900
Subject: [PATCH 65/86] libata: separate out ata_host_alloc() and
 ata_host_register()

Reorganize ata_host_alloc() and its subroutines into the following
three functions.

* ata_host_alloc() : allocates host and its ports.  shost is not
  registered automatically.

* ata_scsi_add_hosts() : allocates and adds shosts associated with an
  ATA host.  Used by ata_host_register().

* ata_host_register() : takes a fully initialized ata_host structure
  and registers it to libata layer and probes it.

Only ata_host_alloc() and ata_host_register() are exported.
ata_device_add() is rewritten using the above functions.  This patch
does not introduce any observable behavior change.  Things worth
mentioning.

* print_id is assigned at registration time and LLDs are allowed to
  overallocate ports and reduce host->n_ports during initialization.
  ata_host_register() will throw away unused ports automatically.

* All SCSI host initialization stuff now resides in
  ata_scsi_add_hosts() in libata-scsi.c, where it should be.

* ipr is now the only user of ata_host_init().  Either kill it by
  converting ipr to use ata_host_alloc() and friends or rename and
  move it to libata-scsi.c

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 499 +++++++++++++++++++++-----------------
 drivers/ata/libata-scsi.c |  68 +++++-
 drivers/ata/libata.h      |   8 +-
 include/linux/libata.h    |   3 +
 4 files changed, 340 insertions(+), 238 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index aea766a48e05..b23f35a4ee6b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -72,7 +72,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
 static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
 static void ata_dev_xfermask(struct ata_device *dev);
 
-static unsigned int ata_print_id = 1;
+unsigned int ata_print_id = 1;
 static struct workqueue_struct *ata_wq;
 
 struct workqueue_struct *ata_aux_wq;
@@ -5666,42 +5666,35 @@ void ata_dev_init(struct ata_device *dev)
 }
 
 /**
- *	ata_port_init - Initialize an ata_port structure
- *	@ap: Structure to initialize
- *	@host: Collection of hosts to which @ap belongs
- *	@ent: Probe information provided by low-level driver
- *	@port_no: Port number associated with this ata_port
+ *	ata_port_alloc - allocate and initialize basic ATA port resources
+ *	@host: ATA host this allocated port belongs to
  *
- *	Initialize a new ata_port structure.
+ *	Allocate and initialize basic ATA port resources.
+ *
+ *	RETURNS:
+ *	Allocate ATA port on success, NULL on failure.
  *
  *	LOCKING:
- *	Inherited from caller.
+ *	Inherited from calling layer (may sleep).
  */
-void ata_port_init(struct ata_port *ap, struct ata_host *host,
-		   const struct ata_probe_ent *ent, unsigned int port_no)
+struct ata_port *ata_port_alloc(struct ata_host *host)
 {
+	struct ata_port *ap;
 	unsigned int i;
 
+	DPRINTK("ENTER\n");
+
+	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
+	if (!ap)
+		return NULL;
+
 	ap->lock = &host->lock;
 	ap->flags = ATA_FLAG_DISABLED;
-	ap->print_id = ata_print_id++;
+	ap->print_id = -1;
 	ap->ctl = ATA_DEVCTL_OBS;
 	ap->host = host;
-	ap->dev = ent->dev;
-	ap->port_no = port_no;
-	if (port_no == 1 && ent->pinfo2) {
-		ap->pio_mask = ent->pinfo2->pio_mask;
-		ap->mwdma_mask = ent->pinfo2->mwdma_mask;
-		ap->udma_mask = ent->pinfo2->udma_mask;
-		ap->flags |= ent->pinfo2->flags;
-		ap->ops = ent->pinfo2->port_ops;
-	} else {
-		ap->pio_mask = ent->pio_mask;
-		ap->mwdma_mask = ent->mwdma_mask;
-		ap->udma_mask = ent->udma_mask;
-		ap->flags |= ent->port_flags;
-		ap->ops = ent->port_ops;
-	}
+	ap->dev = host->dev;
+
 	ap->hw_sata_spd_limit = UINT_MAX;
 	ap->active_tag = ATA_TAG_POISON;
 	ap->last_ctl = 0xFF;
@@ -5721,10 +5714,7 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host,
 	INIT_LIST_HEAD(&ap->eh_done_q);
 	init_waitqueue_head(&ap->eh_wait_q);
 
-	/* set cable type */
 	ap->cbl = ATA_CBL_NONE;
-	if (ap->flags & ATA_FLAG_SATA)
-		ap->cbl = ATA_CBL_SATA;
 
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
 		struct ata_device *dev = &ap->device[i];
@@ -5737,77 +5727,6 @@ void ata_port_init(struct ata_port *ap, struct ata_host *host,
 	ap->stats.unhandled_irq = 1;
 	ap->stats.idle_irq = 1;
 #endif
-
-	memcpy(&ap->ioaddr, &ent->port[port_no], sizeof(struct ata_ioports));
-}
-
-/**
- *	ata_port_init_shost - Initialize SCSI host associated with ATA port
- *	@ap: ATA port to initialize SCSI host for
- *	@shost: SCSI host associated with @ap
- *
- *	Initialize SCSI host @shost associated with ATA port @ap.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-static void ata_port_init_shost(struct ata_port *ap, struct Scsi_Host *shost)
-{
-	ap->scsi_host = shost;
-
-	shost->unique_id = ap->print_id;
-	shost->max_id = 16;
-	shost->max_lun = 1;
-	shost->max_channel = 1;
-	shost->max_cmd_len = 16;
-}
-
-/**
- *	ata_port_add - Attach low-level ATA driver to system
- *	@ent: Information provided by low-level driver
- *	@host: Collections of ports to which we add
- *	@port_no: Port number associated with this host
- *
- *	Attach low-level ATA driver to system.
- *
- *	LOCKING:
- *	PCI/etc. bus probe sem.
- *
- *	RETURNS:
- *	New ata_port on success, for NULL on error.
- */
-static struct ata_port * ata_port_add(const struct ata_probe_ent *ent,
-				      struct ata_host *host,
-				      unsigned int port_no)
-{
-	struct Scsi_Host *shost;
-	struct ata_port *ap;
-
-	DPRINTK("ENTER\n");
-
-	if (!ent->port_ops->error_handler &&
-	    !(ent->port_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
-		printk(KERN_ERR "ata%u: no reset mechanism available\n",
-		       port_no);
-		return NULL;
-	}
-
-	ap = kzalloc(sizeof(struct ata_port), GFP_KERNEL);
-	if (!ap)
-		return NULL;
-
-	shost = scsi_host_alloc(ent->sht, sizeof(struct ata_port *));
-	if (!shost) {
-		kfree(ap);
-		return NULL;
-	}
-
-	*(struct ata_port **)&shost->hostdata[0] = ap;
-	shost->transportt = &ata_scsi_transport_template;
-
-	ata_port_init(ap, host, ent, port_no);
-	ata_port_init_shost(ap, shost);
-
 	return ap;
 }
 
@@ -5845,6 +5764,71 @@ static void ata_host_release(struct device *gendev, void *res)
 	dev_set_drvdata(gendev, NULL);
 }
 
+/**
+ *	ata_host_alloc - allocate and init basic ATA host resources
+ *	@dev: generic device this host is associated with
+ *	@max_ports: maximum number of ATA ports associated with this host
+ *
+ *	Allocate and initialize basic ATA host resources.  LLD calls
+ *	this function to allocate a host, initializes it fully and
+ *	attaches it using ata_host_register().
+ *
+ *	@max_ports ports are allocated and host->n_ports is
+ *	initialized to @max_ports.  The caller is allowed to decrease
+ *	host->n_ports before calling ata_host_register().  The unused
+ *	ports will be automatically freed on registration.
+ *
+ *	RETURNS:
+ *	Allocate ATA host on success, NULL on failure.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ */
+struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
+{
+	struct ata_host *host;
+	size_t sz;
+	int i;
+
+	DPRINTK("ENTER\n");
+
+	if (!devres_open_group(dev, NULL, GFP_KERNEL))
+		return NULL;
+
+	/* alloc a container for our list of ATA ports (buses) */
+	sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *);
+	/* alloc a container for our list of ATA ports (buses) */
+	host = devres_alloc(ata_host_release, sz, GFP_KERNEL);
+	if (!host)
+		goto err_out;
+
+	devres_add(dev, host);
+	dev_set_drvdata(dev, host);
+
+	spin_lock_init(&host->lock);
+	host->dev = dev;
+	host->n_ports = max_ports;
+
+	/* allocate ports bound to this host */
+	for (i = 0; i < max_ports; i++) {
+		struct ata_port *ap;
+
+		ap = ata_port_alloc(host);
+		if (!ap)
+			goto err_out;
+
+		ap->port_no = i;
+		host->ports[i] = ap;
+	}
+
+	devres_remove_group(dev, NULL);
+	return host;
+
+ err_out:
+	devres_release_group(dev, NULL);
+	return NULL;
+}
+
 /**
  *	ata_host_start - start and freeze ports of an ATA host
  *	@host: ATA host to start ports for
@@ -5852,7 +5836,8 @@ static void ata_host_release(struct device *gendev, void *res)
  *	Start and then freeze ports of @host.  Started status is
  *	recorded in host->flags, so this function can be called
  *	multiple times.  Ports are guaranteed to get started only
- *	once.
+ *	once.  If host->ops isn't initialized yet, its set to the
+ *	first non-dummy port ops.
  *
  *	LOCKING:
  *	Inherited from calling layer (may sleep).
@@ -5870,6 +5855,9 @@ int ata_host_start(struct ata_host *host)
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
+		if (!host->ops && !ata_port_is_dummy(ap))
+			host->ops = ap->ops;
+
 		if (ap->ops->port_start) {
 			rc = ap->ops->port_start(ap);
 			if (rc) {
@@ -5906,7 +5894,7 @@ int ata_host_start(struct ata_host *host)
  *	PCI/etc. bus probe sem.
  *
  */
-
+/* KILLME - the only user left is ipr */
 void ata_host_init(struct ata_host *host, struct device *dev,
 		   unsigned long flags, const struct ata_port_operations *ops)
 {
@@ -5917,131 +5905,58 @@ void ata_host_init(struct ata_host *host, struct device *dev,
 }
 
 /**
- *	ata_device_add - Register hardware device with ATA and SCSI layers
- *	@ent: Probe information describing hardware device to be registered
+ *	ata_host_register - register initialized ATA host
+ *	@host: ATA host to register
+ *	@sht: template for SCSI host
  *
- *	This function processes the information provided in the probe
- *	information struct @ent, allocates the necessary ATA and SCSI
- *	host information structures, initializes them, and registers
- *	everything with requisite kernel subsystems.
- *
- *	This function requests irqs, probes the ATA bus, and probes
- *	the SCSI bus.
+ *	Register initialized ATA host.  @host is allocated using
+ *	ata_host_alloc() and fully initialized by LLD.  This function
+ *	starts ports, registers @host with ATA and SCSI layers and
+ *	probe registered devices.
  *
  *	LOCKING:
- *	PCI/etc. bus probe sem.
+ *	Inherited from calling layer (may sleep).
  *
  *	RETURNS:
- *	Number of ports registered.  Zero on error (no ports registered).
+ *	0 on success, -errno otherwise.
  */
-int ata_device_add(const struct ata_probe_ent *ent)
+int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 {
-	unsigned int i;
-	struct device *dev = ent->dev;
-	struct ata_host *host;
-	int rc;
+	int i, rc;
 
-	DPRINTK("ENTER\n");
-
-	if (ent->irq == 0) {
-		dev_printk(KERN_ERR, dev, "is not available: No interrupt assigned.\n");
-		return 0;
+	/* host must have been started */
+	if (!(host->flags & ATA_HOST_STARTED)) {
+		dev_printk(KERN_ERR, host->dev,
+			   "BUG: trying to register unstarted host\n");
+		WARN_ON(1);
+		return -EINVAL;
 	}
 
-	if (!devres_open_group(dev, ata_device_add, GFP_KERNEL))
-		return 0;
+	/* Blow away unused ports.  This happens when LLD can't
+	 * determine the exact number of ports to allocate at
+	 * allocation time.
+	 */
+	for (i = host->n_ports; host->ports[i]; i++)
+		kfree(host->ports[i]);
 
-	/* alloc a container for our list of ATA ports (buses) */
-	host = devres_alloc(ata_host_release, sizeof(struct ata_host) +
-			    (ent->n_ports * sizeof(void *)), GFP_KERNEL);
-	if (!host)
-		goto err_out;
-	devres_add(dev, host);
-	dev_set_drvdata(dev, host);
+	/* give ports names and add SCSI hosts */
+	for (i = 0; i < host->n_ports; i++)
+		host->ports[i]->print_id = ata_print_id++;
 
-	ata_host_init(host, dev, ent->_host_flags, ent->port_ops);
-	host->n_ports = ent->n_ports;
-	host->irq = ent->irq;
-	host->irq2 = ent->irq2;
-	host->iomap = ent->iomap;
-	host->private_data = ent->private_data;
-
-	/* register each port bound to this device */
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap;
-		unsigned long xfer_mode_mask;
-		int irq_line = ent->irq;
-
-		ap = ata_port_add(ent, host, i);
-		host->ports[i] = ap;
-		if (!ap)
-			goto err_out;
-
-		/* dummy? */
-		if (ent->dummy_port_mask & (1 << i)) {
-			ata_port_printk(ap, KERN_INFO, "DUMMY\n");
-			ap->ops = &ata_dummy_port_ops;
-			continue;
-		}
-
-		/* Report the secondary IRQ for second channel legacy */
-		if (i == 1 && ent->irq2)
-			irq_line = ent->irq2;
-
-		xfer_mode_mask =(ap->udma_mask << ATA_SHIFT_UDMA) |
-				(ap->mwdma_mask << ATA_SHIFT_MWDMA) |
-				(ap->pio_mask << ATA_SHIFT_PIO);
-
-		/* print per-port info to dmesg */
-		ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p "
-				"ctl 0x%p bmdma 0x%p irq %d\n",
-				ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
-				ata_mode_string(xfer_mode_mask),
-				ap->ioaddr.cmd_addr,
-				ap->ioaddr.ctl_addr,
-				ap->ioaddr.bmdma_addr,
-				irq_line);
-	}
-
-	/* start ports */
-	rc = ata_host_start(host);
+	rc = ata_scsi_add_hosts(host, sht);
 	if (rc)
-		goto err_out;
+		return rc;
 
-	/* obtain irq, that may be shared between channels */
-	rc = devm_request_irq(dev, ent->irq, ent->port_ops->irq_handler,
-			      ent->irq_flags, DRV_NAME, host);
-	if (rc) {
-		dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n",
-			   ent->irq, rc);
-		goto err_out;
-	}
-
-	/* do we have a second IRQ for the other channel, eg legacy mode */
-	if (ent->irq2) {
-		/* We will get weird core code crashes later if this is true
-		   so trap it now */
-		BUG_ON(ent->irq == ent->irq2);
-
-		rc = devm_request_irq(dev, ent->irq2,
-				ent->port_ops->irq_handler, ent->irq_flags,
-				DRV_NAME, host);
-		if (rc) {
-			dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n",
-				   ent->irq2, rc);
-			goto err_out;
-		}
-	}
-
-	/* resource acquisition complete */
-	devres_remove_group(dev, ata_device_add);
-
-	/* perform each probe synchronously */
-	DPRINTK("probe begin\n");
+	/* set cable, sata_spd_limit and report */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
+		int irq_line;
 		u32 scontrol;
-		int rc;
+		unsigned long xfer_mask;
+
+		/* set SATA cable type if still unset */
+		if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA))
+			ap->cbl = ATA_CBL_SATA;
 
 		/* init sata_spd_limit to the current value */
 		if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) {
@@ -6050,16 +5965,35 @@ int ata_device_add(const struct ata_probe_ent *ent)
 		}
 		ap->sata_spd_limit = ap->hw_sata_spd_limit;
 
-		rc = scsi_add_host(ap->scsi_host, dev);
-		if (rc) {
-			ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n");
-			/* FIXME: do something useful here */
-			/* FIXME: handle unconditional calls to
-			 * scsi_scan_host and ata_host_remove, below,
-			 * at the very least
-			 */
-		}
+		/* report the secondary IRQ for second channel legacy */
+		irq_line = host->irq;
+		if (i == 1 && host->irq2)
+			irq_line = host->irq2;
 
+		xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
+					      ap->udma_mask);
+
+		/* print per-port info to dmesg */
+		if (!ata_port_is_dummy(ap))
+			ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p "
+					"ctl 0x%p bmdma 0x%p irq %d\n",
+					ap->cbl == ATA_CBL_SATA ? 'S' : 'P',
+					ata_mode_string(xfer_mask),
+					ap->ioaddr.cmd_addr,
+					ap->ioaddr.ctl_addr,
+					ap->ioaddr.bmdma_addr,
+					irq_line);
+		else
+			ata_port_printk(ap, KERN_INFO, "DUMMY\n");
+	}
+
+	/* perform each probe synchronously */
+	DPRINTK("probe begin\n");
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		int rc;
+
+		/* probe */
 		if (ap->ops->error_handler) {
 			struct ata_eh_info *ehi = &ap->eh_info;
 			unsigned long flags;
@@ -6104,12 +6038,131 @@ int ata_device_add(const struct ata_probe_ent *ent)
 		ata_scsi_scan_host(ap);
 	}
 
-	VPRINTK("EXIT, returning %u\n", ent->n_ports);
-	return ent->n_ports; /* success */
+	return 0;
+}
+
+/**
+ *	ata_device_add - Register hardware device with ATA and SCSI layers
+ *	@ent: Probe information describing hardware device to be registered
+ *
+ *	This function processes the information provided in the probe
+ *	information struct @ent, allocates the necessary ATA and SCSI
+ *	host information structures, initializes them, and registers
+ *	everything with requisite kernel subsystems.
+ *
+ *	This function requests irqs, probes the ATA bus, and probes
+ *	the SCSI bus.
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ *	RETURNS:
+ *	Number of ports registered.  Zero on error (no ports registered).
+ */
+int ata_device_add(const struct ata_probe_ent *ent)
+{
+	unsigned int i;
+	struct device *dev = ent->dev;
+	struct ata_host *host;
+	int rc;
+
+	DPRINTK("ENTER\n");
+
+	if (ent->irq == 0) {
+		dev_printk(KERN_ERR, dev, "is not available: No interrupt assigned.\n");
+		return 0;
+	}
+
+	if (!ent->port_ops->error_handler &&
+	    !(ent->port_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
+		dev_printk(KERN_ERR, dev, "no reset mechanism available\n");
+		return 0;
+	}
+
+	if (!devres_open_group(dev, ata_device_add, GFP_KERNEL))
+		return 0;
+
+	/* allocate host */
+	host = ata_host_alloc(dev, ent->n_ports);
+
+	host->irq = ent->irq;
+	host->irq2 = ent->irq2;
+	host->iomap = ent->iomap;
+	host->private_data = ent->private_data;
+	host->ops = ent->port_ops;
+	host->flags = ent->_host_flags;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		/* dummy? */
+		if (ent->dummy_port_mask & (1 << i)) {
+			ap->ops = &ata_dummy_port_ops;
+			continue;
+		}
+
+		if (ap->port_no == 1 && ent->pinfo2) {
+			ap->pio_mask = ent->pinfo2->pio_mask;
+			ap->mwdma_mask = ent->pinfo2->mwdma_mask;
+			ap->udma_mask = ent->pinfo2->udma_mask;
+			ap->flags |= ent->pinfo2->flags;
+			ap->ops = ent->pinfo2->port_ops;
+		} else {
+			ap->pio_mask = ent->pio_mask;
+			ap->mwdma_mask = ent->mwdma_mask;
+			ap->udma_mask = ent->udma_mask;
+			ap->flags |= ent->port_flags;
+			ap->ops = ent->port_ops;
+		}
+
+		memcpy(&ap->ioaddr, &ent->port[ap->port_no],
+		       sizeof(struct ata_ioports));
+	}
+
+	/* start and freeze ports before requesting IRQ */
+	rc = ata_host_start(host);
+	if (rc)
+		goto err_out;
+
+	/* obtain irq, that may be shared between channels */
+	rc = devm_request_irq(dev, ent->irq, ent->port_ops->irq_handler,
+			      ent->irq_flags, DRV_NAME, host);
+	if (rc) {
+		dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n",
+			   ent->irq, rc);
+		goto err_out;
+	}
+
+	/* do we have a second IRQ for the other channel, eg legacy mode */
+	if (ent->irq2) {
+		/* We will get weird core code crashes later if this is true
+		   so trap it now */
+		BUG_ON(ent->irq == ent->irq2);
+
+		rc = devm_request_irq(dev, ent->irq2,
+				ent->port_ops->irq_handler, ent->irq_flags,
+				DRV_NAME, host);
+		if (rc) {
+			dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n",
+				   ent->irq2, rc);
+			goto err_out;
+		}
+	}
+
+	/* resource acquisition complete */
+	devres_remove_group(dev, ata_device_add);
+
+	/* register */
+	rc = ata_host_register(host, ent->sht);
+	if (rc)
+		goto err_out;
+
+	VPRINTK("EXIT, returning %u\n", host->n_ports);
+	return host->n_ports; /* success */
 
  err_out:
 	devres_release_group(dev, ata_device_add);
-	VPRINTK("EXIT, returning %d\n", rc);
+	VPRINTK("EXIT, returning 0\n");
 	return 0;
 }
 
@@ -6493,7 +6546,9 @@ EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_std_ports);
 EXPORT_SYMBOL_GPL(ata_host_init);
+EXPORT_SYMBOL_GPL(ata_host_alloc);
 EXPORT_SYMBOL_GPL(ata_host_start);
+EXPORT_SYMBOL_GPL(ata_host_register);
 EXPORT_SYMBOL_GPL(ata_device_add);
 EXPORT_SYMBOL_GPL(ata_host_detach);
 EXPORT_SYMBOL_GPL(ata_sg_init);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 563ef0bfb038..9afba2ba489e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -104,7 +104,7 @@ static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = {
  * libata transport template.  libata doesn't do real transport stuff.
  * It just needs the eh_timed_out hook.
  */
-struct scsi_transport_template ata_scsi_transport_template = {
+static struct scsi_transport_template ata_scsi_transport_template = {
 	.eh_strategy_handler	= ata_scsi_error,
 	.eh_timed_out		= ata_scsi_timed_out,
 	.user_scan		= ata_scsi_user_scan,
@@ -2961,6 +2961,48 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
 	}
 }
 
+int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
+{
+	int i, rc;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		struct Scsi_Host *shost;
+
+		rc = -ENOMEM;
+		shost = scsi_host_alloc(sht, sizeof(struct ata_port *));
+		if (!shost)
+			goto err_alloc;
+
+		*(struct ata_port **)&shost->hostdata[0] = ap;
+		ap->scsi_host = shost;
+
+		shost->transportt = &ata_scsi_transport_template;
+		shost->unique_id = ap->print_id;
+		shost->max_id = 16;
+		shost->max_lun = 1;
+		shost->max_channel = 1;
+		shost->max_cmd_len = 16;
+
+		rc = scsi_add_host(ap->scsi_host, ap->host->dev);
+		if (rc)
+			goto err_add;
+	}
+
+	return 0;
+
+ err_add:
+	scsi_host_put(host->ports[i]->scsi_host);
+ err_alloc:
+	while (--i >= 0) {
+		struct Scsi_Host *shost = host->ports[i]->scsi_host;
+
+		scsi_remove_host(shost);
+		scsi_host_put(shost);
+	}
+	return rc;
+}
+
 void ata_scsi_scan_host(struct ata_port *ap)
 {
 	unsigned int i;
@@ -3237,21 +3279,21 @@ struct ata_port *ata_sas_port_alloc(struct ata_host *host,
 				    struct ata_port_info *port_info,
 				    struct Scsi_Host *shost)
 {
-	struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL);
-	struct ata_probe_ent *ent;
+	struct ata_port *ap;
 
+	ap = ata_port_alloc(host);
 	if (!ap)
 		return NULL;
 
-	ent = ata_probe_ent_alloc(host->dev, port_info);
-	if (!ent) {
-		kfree(ap);
-		return NULL;
-	}
-
-	ata_port_init(ap, host, ent, 0);
+	ap->port_no = 0;
 	ap->lock = shost->host_lock;
-	devm_kfree(host->dev, ent);
+	ap->pio_mask = port_info->pio_mask;
+	ap->mwdma_mask = port_info->mwdma_mask;
+	ap->udma_mask = port_info->udma_mask;
+	ap->flags |= port_info->flags;
+	ap->ops = port_info->port_ops;
+	ap->cbl = ATA_CBL_SATA;
+
 	return ap;
 }
 EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
@@ -3307,8 +3349,10 @@ int ata_sas_port_init(struct ata_port *ap)
 {
 	int rc = ap->ops->port_start(ap);
 
-	if (!rc)
+	if (!rc) {
+		ap->print_id = ata_print_id++;
 		rc = ata_bus_probe(ap);
+	}
 
 	return rc;
 }
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 1f1e3a51f859..b4d5253d627a 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -52,6 +52,7 @@ enum {
 	ATA_DNXFER_QUIET	= (1 << 31),
 };
 
+extern unsigned int ata_print_id;
 extern struct workqueue_struct *ata_aux_wq;
 extern int atapi_enabled;
 extern int atapi_dmadir;
@@ -92,10 +93,9 @@ extern int ata_flush_cache(struct ata_device *dev);
 extern void ata_dev_init(struct ata_device *dev);
 extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
-extern void ata_port_init(struct ata_port *ap, struct ata_host *host,
-			  const struct ata_probe_ent *ent, unsigned int port_no);
 extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev,
 						 const struct ata_port_info *port);
+extern struct ata_port *ata_port_alloc(struct ata_host *host);
 
 /* libata-acpi.c */
 #ifdef CONFIG_SATA_ACPI
@@ -113,8 +113,8 @@ static inline int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
 #endif
 
 /* libata-scsi.c */
-extern struct scsi_transport_template ata_scsi_transport_template;
-
+extern int ata_scsi_add_hosts(struct ata_host *host,
+			      struct scsi_host_template *sht);
 extern void ata_scsi_scan_host(struct ata_port *ap);
 extern int ata_scsi_offline_dev(struct ata_device *dev);
 extern void ata_scsi_hotplug(struct work_struct *work);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bda26e86f05f..06cf23f0b3c7 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -733,7 +733,10 @@ extern int ata_pci_device_resume(struct pci_dev *pdev);
 #endif
 extern int ata_pci_clear_simplex(struct pci_dev *pdev);
 #endif /* CONFIG_PCI */
+extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
 extern int ata_host_start(struct ata_host *host);
+extern int ata_host_register(struct ata_host *host,
+			     struct scsi_host_template *sht);
 extern int ata_device_add(const struct ata_probe_ent *ent);
 extern void ata_host_detach(struct ata_host *host);
 extern void ata_host_init(struct ata_host *, struct device *,

From f5cda257296fbd3683b1f568f2d94d3caaacf74d Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:07 +0900
Subject: [PATCH 66/86] libata: implement ata_host_alloc_pinfo() and
 ata_host_register()

Implement ata_host_alloc_pinfo() and ata_host_register().  These helpers
will be used in the following patches to adopt new init model.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 93 +++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |  5 +++
 2 files changed, 98 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b23f35a4ee6b..ab189d3b84d3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5829,6 +5829,55 @@ struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
 	return NULL;
 }
 
+/**
+ *	ata_host_alloc_pinfo - alloc host and init with port_info array
+ *	@dev: generic device this host is associated with
+ *	@ppi: array of ATA port_info to initialize host with
+ *	@n_ports: number of ATA ports attached to this host
+ *
+ *	Allocate ATA host and initialize with info from @ppi.  If NULL
+ *	terminated, @ppi may contain fewer entries than @n_ports.  The
+ *	last entry will be used for the remaining ports.
+ *
+ *	RETURNS:
+ *	Allocate ATA host on success, NULL on failure.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ */
+struct ata_host *ata_host_alloc_pinfo(struct device *dev,
+				      const struct ata_port_info * const * ppi,
+				      int n_ports)
+{
+	const struct ata_port_info *pi;
+	struct ata_host *host;
+	int i, j;
+
+	host = ata_host_alloc(dev, n_ports);
+	if (!host)
+		return NULL;
+
+	for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		if (ppi[j])
+			pi = ppi[j++];
+
+		ap->pio_mask = pi->pio_mask;
+		ap->mwdma_mask = pi->mwdma_mask;
+		ap->udma_mask = pi->udma_mask;
+		ap->flags |= pi->flags;
+		ap->ops = pi->port_ops;
+
+		if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
+			host->ops = pi->port_ops;
+		if (!host->private_data && pi->private_data)
+			host->private_data = pi->private_data;
+	}
+
+	return host;
+}
+
 /**
  *	ata_host_start - start and freeze ports of an ATA host
  *	@host: ATA host to start ports for
@@ -6041,6 +6090,48 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 	return 0;
 }
 
+/**
+ *	ata_host_activate - start host, request IRQ and register it
+ *	@host: target ATA host
+ *	@irq: IRQ to request
+ *	@irq_handler: irq_handler used when requesting IRQ
+ *	@irq_flags: irq_flags used when requesting IRQ
+ *	@sht: scsi_host_template to use when registering the host
+ *
+ *	After allocating an ATA host and initializing it, most libata
+ *	LLDs perform three steps to activate the host - start host,
+ *	request IRQ and register it.  This helper takes necessasry
+ *	arguments and performs the three steps in one go.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_host_activate(struct ata_host *host, int irq,
+		      irq_handler_t irq_handler, unsigned long irq_flags,
+		      struct scsi_host_template *sht)
+{
+	int rc;
+
+	rc = ata_host_start(host);
+	if (rc)
+		return rc;
+
+	rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
+			      dev_driver_string(host->dev), host);
+	if (rc)
+		return rc;
+
+	rc = ata_host_register(host, sht);
+	/* if failed, just free the IRQ and leave ports alone */
+	if (rc)
+		devm_free_irq(host->dev, irq, host);
+
+	return rc;
+}
+
 /**
  *	ata_device_add - Register hardware device with ATA and SCSI layers
  *	@ent: Probe information describing hardware device to be registered
@@ -6547,8 +6638,10 @@ EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_std_ports);
 EXPORT_SYMBOL_GPL(ata_host_init);
 EXPORT_SYMBOL_GPL(ata_host_alloc);
+EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
 EXPORT_SYMBOL_GPL(ata_host_start);
 EXPORT_SYMBOL_GPL(ata_host_register);
+EXPORT_SYMBOL_GPL(ata_host_activate);
 EXPORT_SYMBOL_GPL(ata_device_add);
 EXPORT_SYMBOL_GPL(ata_host_detach);
 EXPORT_SYMBOL_GPL(ata_sg_init);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 06cf23f0b3c7..300daf6c50d0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -734,9 +734,14 @@ extern int ata_pci_device_resume(struct pci_dev *pdev);
 extern int ata_pci_clear_simplex(struct pci_dev *pdev);
 #endif /* CONFIG_PCI */
 extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
+extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
+			const struct ata_port_info * const * ppi, int n_ports);
 extern int ata_host_start(struct ata_host *host);
 extern int ata_host_register(struct ata_host *host,
 			     struct scsi_host_template *sht);
+extern int ata_host_activate(struct ata_host *host, int irq,
+			     irq_handler_t irq_handler, unsigned long irq_flags,
+			     struct scsi_host_template *sht);
 extern int ata_device_add(const struct ata_probe_ent *ent);
 extern void ata_host_detach(struct ata_host *host);
 extern void ata_host_init(struct ata_host *, struct device *,

From 0f834de3ea61aacacf1fac59ba9e82680f83c846 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:07 +0900
Subject: [PATCH 67/86] libata: convert legacy PCI host handling to new init
 model

Convert legacy PCI host handling to alloc-init-register model.
ata_init_legacy_host(), ata_request_legacy_irqs() and
ata_pci_init_bmdma() are separated out and follow the new init model.

The two legacy handling functions use separate ata_legacy_devres
instead of generic devm_* resources.  This reduces devres overhead for
legacy hosts which was a bit high because it didn't use PCI/iomap
merged resoruces.

ata_pci_init_one() is rewritten in terms of the aboved functions but
native mode handling is still using the old method.  Conversion will
be completed when native mode handling is updated.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-sff.c | 422 +++++++++++++++++++++++++++++----------
 1 file changed, 311 insertions(+), 111 deletions(-)

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 93cc96782165..d48e1544a0bb 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -627,75 +627,266 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
 	return probe_ent;
 }
 
-static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
-				struct ata_port_info **port, int port_mask)
+/**
+ *	ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host
+ *	@host: target ATA host
+ *
+ *	Acquire PCI BMDMA resources and initialize @host accordingly.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+static int ata_pci_init_bmdma(struct ata_host *host)
 {
-	struct ata_probe_ent *probe_ent;
-	void __iomem *iomap[5] = { }, *bmdma;
+	struct device *gdev = host->dev;
+	struct pci_dev *pdev = to_pci_dev(gdev);
+	int i, rc;
 
-	if (port_mask & ATA_PORT_PRIMARY) {
-		iomap[0] = devm_ioport_map(&pdev->dev, ATA_PRIMARY_CMD, 8);
-		iomap[1] = devm_ioport_map(&pdev->dev, ATA_PRIMARY_CTL, 1);
-		if (!iomap[0] || !iomap[1])
-			return NULL;
+	/* TODO: If we get no DMA mask we should fall back to PIO */
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+
+	/* request and iomap DMA region */
+	rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
+	if (rc) {
+		dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
+		return -ENOMEM;
+	}
+	host->iomap = pcim_iomap_table(pdev);
+
+	for (i = 0; i < 2; i++) {
+		struct ata_port *ap = host->ports[i];
+		struct ata_ioports *ioaddr = &ap->ioaddr;
+		void __iomem *bmdma = host->iomap[4] + 8 * i;
+
+		if (ata_port_is_dummy(ap))
+			continue;
+
+		ioaddr->bmdma_addr = bmdma;
+		if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
+		    (ioread8(bmdma + 2) & 0x80))
+			host->flags |= ATA_HOST_SIMPLEX;
 	}
 
-	if (port_mask & ATA_PORT_SECONDARY) {
-		iomap[2] = devm_ioport_map(&pdev->dev, ATA_SECONDARY_CMD, 8);
-		iomap[3] = devm_ioport_map(&pdev->dev, ATA_SECONDARY_CTL, 1);
-		if (!iomap[2] || !iomap[3])
-			return NULL;
-	}
-
-	bmdma = pcim_iomap(pdev, 4, 16); /* may fail */
-
-	/* alloc and init probe_ent */
-	probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
-	if (!probe_ent)
-		return NULL;
-
-	probe_ent->n_ports = 2;
-	probe_ent->irq_flags = IRQF_SHARED;
-
-	if (port_mask & ATA_PORT_PRIMARY) {
-		probe_ent->irq = ATA_PRIMARY_IRQ(pdev);
-		probe_ent->port[0].cmd_addr = iomap[0];
-		probe_ent->port[0].altstatus_addr =
-		probe_ent->port[0].ctl_addr = iomap[1];
-		if (bmdma) {
-			probe_ent->port[0].bmdma_addr = bmdma;
-			if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-			    (ioread8(bmdma + 2) & 0x80))
-				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-		}
-		ata_std_ports(&probe_ent->port[0]);
-	} else
-		probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY;
-
-	if (port_mask & ATA_PORT_SECONDARY) {
-		if (probe_ent->irq)
-			probe_ent->irq2 = ATA_SECONDARY_IRQ(pdev);
-		else
-			probe_ent->irq = ATA_SECONDARY_IRQ(pdev);
-		probe_ent->port[1].cmd_addr = iomap[2];
-		probe_ent->port[1].altstatus_addr =
-		probe_ent->port[1].ctl_addr = iomap[3];
-		if (bmdma) {
-			probe_ent->port[1].bmdma_addr = bmdma + 8;
-			if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-			    (ioread8(bmdma + 10) & 0x80))
-				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-		}
-		ata_std_ports(&probe_ent->port[1]);
-
-		/* FIXME: could be pointing to stack area; must copy */
-		probe_ent->pinfo2 = port[1];
-	} else
-		probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY;
-
-	return probe_ent;
+	return 0;
 }
 
+struct ata_legacy_devres {
+	unsigned int	mask;
+	unsigned long	cmd_port[2];
+	void __iomem *	cmd_addr[2];
+	void __iomem *	ctl_addr[2];
+	unsigned int	irq[2];
+	void *		irq_dev_id[2];
+};
+
+static void ata_legacy_free_irqs(struct ata_legacy_devres *legacy_dr)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		if (!legacy_dr->irq[i])
+			continue;
+
+		free_irq(legacy_dr->irq[i], legacy_dr->irq_dev_id[i]);
+		legacy_dr->irq[i] = 0;
+		legacy_dr->irq_dev_id[i] = NULL;
+	}
+}
+
+static void ata_legacy_release(struct device *gdev, void *res)
+{
+	struct ata_legacy_devres *this = res;
+	int i;
+
+	ata_legacy_free_irqs(this);
+
+	for (i = 0; i < 2; i++) {
+		if (this->cmd_addr[i])
+			ioport_unmap(this->cmd_addr[i]);
+		if (this->ctl_addr[i])
+			ioport_unmap(this->ctl_addr[i]);
+		if (this->cmd_port[i])
+			release_region(this->cmd_port[i], 8);
+	}
+}
+
+static int ata_init_legacy_port(struct ata_port *ap,
+				struct ata_legacy_devres *legacy_dr)
+{
+	struct ata_host *host = ap->host;
+	int port_no = ap->port_no;
+	unsigned long cmd_port, ctl_port;
+
+	if (port_no == 0) {
+		cmd_port = ATA_PRIMARY_CMD;
+		ctl_port = ATA_PRIMARY_CTL;
+	} else {
+		cmd_port = ATA_SECONDARY_CMD;
+		ctl_port = ATA_SECONDARY_CTL;
+	}
+
+	/* request cmd_port */
+	if (request_region(cmd_port, 8, "libata"))
+		legacy_dr->cmd_port[port_no] = cmd_port;
+	else {
+		dev_printk(KERN_WARNING, host->dev,
+			   "0x%0lX IDE port busy\n", cmd_port);
+		return -EBUSY;
+	}
+
+	/* iomap cmd and ctl ports */
+	legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8);
+	legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1);
+	if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no])
+		return -ENOMEM;
+
+	/* init IO addresses */
+	ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no];
+	ap->ioaddr.altstatus_addr = legacy_dr->ctl_addr[port_no];
+	ap->ioaddr.ctl_addr = legacy_dr->ctl_addr[port_no];
+	ata_std_ports(&ap->ioaddr);
+
+	return 0;
+}
+
+/**
+ *	ata_init_legacy_host - acquire legacy ATA resources and init ATA host
+ *	@host: target ATA host
+ *	@legacy_mask: out parameter, mask indicating ports is in legacy mode
+ *	@was_busy: out parameter, indicates whether any port was busy
+ *
+ *	Acquire legacy ATA resources for ports.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+static int ata_init_legacy_host(struct ata_host *host,
+				unsigned int *legacy_mask, int *was_busy)
+{
+	struct device *gdev = host->dev;
+	struct ata_legacy_devres *legacy_dr;
+	int i, rc;
+
+	if (!devres_open_group(gdev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = -ENOMEM;
+	legacy_dr = devres_alloc(ata_legacy_release, sizeof(*legacy_dr),
+				 GFP_KERNEL);
+	if (!legacy_dr)
+		goto err_out;
+	devres_add(gdev, legacy_dr);
+
+	for (i = 0; i < 2; i++) {
+		*legacy_mask &= ~(1 << i);
+		rc = ata_init_legacy_port(host->ports[i], legacy_dr);
+		if (rc == 0)
+			legacy_dr->mask |= 1 << i;
+		else if (rc == -EBUSY)
+			(*was_busy)++;
+	}
+
+	if (!legacy_dr->mask)
+		return -EBUSY;
+
+	for (i = 0; i < 2; i++)
+		if (!(legacy_dr->mask & (1 << i)))
+			host->ports[i]->ops = &ata_dummy_port_ops;
+
+	*legacy_mask |= legacy_dr->mask;
+
+	devres_remove_group(gdev, NULL);
+	return 0;
+
+ err_out:
+	devres_release_group(gdev, NULL);
+	return rc;
+}
+
+/**
+ *	ata_request_legacy_irqs - request legacy ATA IRQs
+ *	@host: target ATA host
+ *	@handler: array of IRQ handlers
+ *	@irq_flags: array of IRQ flags
+ *	@dev_id: array of IRQ dev_ids
+ *
+ *	Request legacy IRQs for non-dummy legacy ports in @host.  All
+ *	IRQ parameters are passed as array to allow ports to have
+ *	separate IRQ handlers.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+static int ata_request_legacy_irqs(struct ata_host *host,
+				   irq_handler_t const *handler,
+				   const unsigned int *irq_flags,
+				   void * const *dev_id)
+{
+	struct device *gdev = host->dev;
+	struct ata_legacy_devres *legacy_dr;
+	int i, rc;
+
+	legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL);
+	BUG_ON(!legacy_dr);
+
+	for (i = 0; i < 2; i++) {
+		unsigned int irq;
+
+		/* FIXME: ATA_*_IRQ() should take generic device not pci_dev */
+		if (i == 0)
+			irq = ATA_PRIMARY_IRQ(to_pci_dev(gdev));
+		else
+			irq = ATA_SECONDARY_IRQ(to_pci_dev(gdev));
+
+		if (!(legacy_dr->mask & (1 << i)))
+			continue;
+
+		if (!handler[i]) {
+			dev_printk(KERN_ERR, gdev,
+				   "NULL handler specified for port %d\n", i);
+			rc = -EINVAL;
+			goto err_out;
+		}
+
+		rc = request_irq(irq, handler[i], irq_flags[i], DRV_NAME,
+				 dev_id[i]);
+		if (rc) {
+			dev_printk(KERN_ERR, gdev,
+				"irq %u request failed (errno=%d)\n", irq, rc);
+			goto err_out;
+		}
+
+		/* record irq allocation in legacy_dr */
+		legacy_dr->irq[i] = irq;
+		legacy_dr->irq_dev_id[i] = dev_id[i];
+
+		/* only used to print info */
+		if (i == 0)
+			host->irq = irq;
+		else
+			host->irq2 = irq;
+	}
+
+	return 0;
+
+ err_out:
+	ata_legacy_free_irqs(legacy_dr);
+	return rc;
+}
 
 /**
  *	ata_pci_init_one - Initialize/register PCI IDE host controller
@@ -727,7 +918,8 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 {
 	struct device *dev = &pdev->dev;
 	struct ata_probe_ent *probe_ent = NULL;
-	struct ata_port_info *port[2];
+	struct ata_host *host = NULL;
+	const struct ata_port_info *port[2];
 	u8 mask;
 	unsigned int legacy_mode = 0;
 	int rc;
@@ -783,66 +975,74 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 			pcim_pin_device(pdev);
 			goto err_out;
 		}
+
+		/* TODO: If we get no DMA mask we should fall back to PIO */
+		rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+		if (rc)
+			goto err_out;
+		rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+		if (rc)
+			goto err_out;
+
+		pci_set_master(pdev);
 	} else {
-		/* Deal with combined mode hack. This side of the logic all
-		   goes away once the combined mode hack is killed in 2.6.21 */
-		if (!devm_request_region(dev, ATA_PRIMARY_CMD, 8, "libata")) {
+		int was_busy = 0;
+
+		rc = -ENOMEM;
+		host = ata_host_alloc_pinfo(dev, port, 2);
+		if (!host)
+			goto err_out;
+
+		rc = ata_init_legacy_host(host, &legacy_mode, &was_busy);
+		if (was_busy)
 			pcim_pin_device(pdev);
-			printk(KERN_WARNING "ata: 0x%0X IDE port busy\n",
-					    ATA_PRIMARY_CMD);
-		} else
-			legacy_mode |= ATA_PORT_PRIMARY;
+		if (rc)
+			goto err_out;
 
-		if (!devm_request_region(dev, ATA_SECONDARY_CMD, 8, "libata")) {
-			pcim_pin_device(pdev);
-			printk(KERN_WARNING "ata: 0x%X IDE port busy\n",
-					    ATA_SECONDARY_CMD);
-		} else
-			legacy_mode |= ATA_PORT_SECONDARY;
+		/* request respective PCI regions, may fail */
+		rc = pci_request_region(pdev, 1, DRV_NAME);
+		rc = pci_request_region(pdev, 3, DRV_NAME);
 
-		if (legacy_mode & ATA_PORT_PRIMARY)
-			pci_request_region(pdev, 1, DRV_NAME);
-		if (legacy_mode & ATA_PORT_SECONDARY)
-			pci_request_region(pdev, 3, DRV_NAME);
-		/* If there is a DMA resource, allocate it */
-		pci_request_region(pdev, 4, DRV_NAME);
+		/* init bmdma */
+		ata_pci_init_bmdma(host);
+		pci_set_master(pdev);
 	}
 
-	/* we have legacy mode, but all ports are unavailable */
-	if (legacy_mode == (1 << 3)) {
-		rc = -EBUSY;
-		goto err_out;
-	}
-
-	/* TODO: If we get no DMA mask we should fall back to PIO */
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		goto err_out;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		goto err_out;
-
 	if (legacy_mode) {
-		probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode);
+		irq_handler_t handler[2] = { host->ops->irq_handler,
+					     host->ops->irq_handler };
+		unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED };
+		void *dev_id[2] = { host, host };
+
+		rc = ata_host_start(host);
+		if (rc)
+			goto err_out;
+
+		rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id);
+		if (rc)
+			goto err_out;
+
+		rc = ata_host_register(host, port_info[0]->sht);
+		if (rc)
+			goto err_out;
 	} else {
 		if (n_ports == 2)
-			probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+			probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
 		else
-			probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
-	}
-	if (!probe_ent) {
-		rc = -ENOMEM;
-		goto err_out;
-	}
+			probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY);
 
-	pci_set_master(pdev);
+		if (!probe_ent) {
+			rc = -ENOMEM;
+			goto err_out;
+		}
 
-	if (!ata_device_add(probe_ent)) {
-		rc = -ENODEV;
-		goto err_out;
+		if (!ata_device_add(probe_ent)) {
+			rc = -ENODEV;
+			goto err_out;
+		}
+
+		devm_kfree(dev, probe_ent);
 	}
-
-	devm_kfree(dev, probe_ent);
 	devres_remove_group(dev, NULL);
 	return 0;
 

From d491b27b1959565671e2c05dff09b5f535a854ce Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:07 +0900
Subject: [PATCH 68/86] libata: convert native PCI host handling to new init
 model

Convert native PCI host handling to alloc-init-register model.  New
function ata_pci_init_native_host() follows the new init model and
replaces ata_pci_init_native_mode().  As there are remaining LLD
users, the old function isn't removed yet.

ata_pci_init_one() is reimplemented using the new function and now
fully converted to new init model.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c |   1 +
 drivers/ata/libata-sff.c  | 153 +++++++++++++++++++++++++-------------
 include/linux/libata.h    |   2 +
 3 files changed, 105 insertions(+), 51 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ab189d3b84d3..8d3ae66572e9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6726,6 +6726,7 @@ EXPORT_SYMBOL_GPL(ata_timing_merge);
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(pci_test_config_bits);
 EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
+EXPORT_SYMBOL_GPL(ata_pci_init_native_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
 #ifdef CONFIG_PM
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index d48e1544a0bb..d551fa1cb104 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -678,6 +678,70 @@ static int ata_pci_init_bmdma(struct ata_host *host)
 	return 0;
 }
 
+/**
+ *	ata_pci_init_native_host - acquire native ATA resources and init host
+ *	@host: target ATA host
+ *	@port_mask: ports to consider
+ *
+ *	Acquire native PCI ATA resources for @host and initialize
+ *	@host accordoingly.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask)
+{
+	struct device *gdev = host->dev;
+	struct pci_dev *pdev = to_pci_dev(gdev);
+	int i, rc;
+
+	/* Discard disabled ports.  Some controllers show their unused
+	 * channels this way.  Disabled ports are made dummy.
+	 */
+	for (i = 0; i < 2; i++) {
+		if ((port_mask & (1 << i)) && !ata_resources_present(pdev, i)) {
+			host->ports[i]->ops = &ata_dummy_port_ops;
+			port_mask &= ~(1 << i);
+		}
+	}
+
+	if (!port_mask) {
+		dev_printk(KERN_ERR, gdev, "no available port\n");
+		return -ENODEV;
+	}
+
+	/* request, iomap BARs and init port addresses accordingly */
+	for (i = 0; i < 2; i++) {
+		struct ata_port *ap = host->ports[i];
+		int base = i * 2;
+		void __iomem * const *iomap;
+
+		if (!(port_mask & (1 << i)))
+			continue;
+
+		rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME);
+		if (rc) {
+			dev_printk(KERN_ERR, gdev, "failed to request/iomap "
+				   "BARs for port %d (errno=%d)\n", i, rc);
+			if (rc == -EBUSY)
+				pcim_pin_device(pdev);
+			return rc;
+		}
+		host->iomap = iomap = pcim_iomap_table(pdev);
+
+		ap->ioaddr.cmd_addr = iomap[base];
+		ap->ioaddr.altstatus_addr =
+		ap->ioaddr.ctl_addr = (void __iomem *)
+			((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
+		ata_std_ports(&ap->ioaddr);
+	}
+
+	return 0;
+}
+
 struct ata_legacy_devres {
 	unsigned int	mask;
 	unsigned long	cmd_port[2];
@@ -917,7 +981,6 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 		      unsigned int n_ports)
 {
 	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent = NULL;
 	struct ata_host *host = NULL;
 	const struct ata_port_info *port[2];
 	u8 mask;
@@ -943,7 +1006,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 
 	   Checking dev->is_enabled is insufficient as this is not set at
 	   boot for the primary video which is BIOS enabled
-         */
+	  */
 
 	rc = pcim_enable_device(pdev);
 	if (rc)
@@ -969,30 +1032,28 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 #endif
 	}
 
+	/* alloc and init host */
+	host = ata_host_alloc_pinfo(dev, port, 2);
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "failed to allocate ATA host\n");
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
 	if (!legacy_mode) {
-		rc = pci_request_regions(pdev, DRV_NAME);
-		if (rc) {
-			pcim_pin_device(pdev);
-			goto err_out;
-		}
+		unsigned int port_mask;
 
-		/* TODO: If we get no DMA mask we should fall back to PIO */
-		rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+		port_mask = ATA_PORT_PRIMARY;
+		if (n_ports > 1)
+			port_mask |= ATA_PORT_SECONDARY;
+
+		rc = ata_pci_init_native_host(host, port_mask);
 		if (rc)
 			goto err_out;
-		rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-		if (rc)
-			goto err_out;
-
-		pci_set_master(pdev);
 	} else {
 		int was_busy = 0;
 
-		rc = -ENOMEM;
-		host = ata_host_alloc_pinfo(dev, port, 2);
-		if (!host)
-			goto err_out;
-
 		rc = ata_init_legacy_host(host, &legacy_mode, &was_busy);
 		if (was_busy)
 			pcim_pin_device(pdev);
@@ -1002,47 +1063,37 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 		/* request respective PCI regions, may fail */
 		rc = pci_request_region(pdev, 1, DRV_NAME);
 		rc = pci_request_region(pdev, 3, DRV_NAME);
-
-		/* init bmdma */
-		ata_pci_init_bmdma(host);
-		pci_set_master(pdev);
 	}
 
-	if (legacy_mode) {
+	/* init BMDMA, may fail */
+	ata_pci_init_bmdma(host);
+	pci_set_master(pdev);
+
+	/* start host and request IRQ */
+	rc = ata_host_start(host);
+	if (rc)
+		goto err_out;
+
+	if (!legacy_mode)
+		rc = devm_request_irq(dev, pdev->irq,
+				      port_info[0]->port_ops->irq_handler,
+				      IRQF_SHARED, DRV_NAME, host);
+	else {
 		irq_handler_t handler[2] = { host->ops->irq_handler,
 					     host->ops->irq_handler };
 		unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED };
 		void *dev_id[2] = { host, host };
 
-		rc = ata_host_start(host);
-		if (rc)
-			goto err_out;
-
 		rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id);
-		if (rc)
-			goto err_out;
-
-		rc = ata_host_register(host, port_info[0]->sht);
-		if (rc)
-			goto err_out;
-	} else {
-		if (n_ports == 2)
-			probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-		else
-			probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY);
-
-		if (!probe_ent) {
-			rc = -ENOMEM;
-			goto err_out;
-		}
-
-		if (!ata_device_add(probe_ent)) {
-			rc = -ENODEV;
-			goto err_out;
-		}
-
-		devm_kfree(dev, probe_ent);
 	}
+	if (rc)
+		goto err_out;
+
+	/* register */
+	rc = ata_host_register(host, port_info[0]->sht);
+	if (rc)
+		goto err_out;
+
 	devres_remove_group(dev, NULL);
 	return 0;
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 300daf6c50d0..400429f9cd9d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -892,6 +892,8 @@ struct pci_bits {
 
 extern struct ata_probe_ent *
 ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
+extern int ata_pci_init_native_host(struct ata_host *host,
+				    unsigned int port_mask);
 extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
 extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long);
 #endif /* CONFIG_PCI */

From 21b0ad4fb8306ac2bf5a249ffc978b1b8924c7d0 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:07 +0900
Subject: [PATCH 69/86] libata: add init helpers including
 ata_pci_prepare_native_host()

These will be used to convert LLDs to new init model.

* Add irq_handler field to port_info.  In new init model, requesting
  IRQ is LLD's responsibility and libata doesn't need to know about
  irq_handler.  Most LLDs can simply register their irq_handler but
  some need different irq_handler depending on specific chip.  The
  added port_info->irq_handler field can be used by LLDs to select
  the matching IRQ handler in such cases.

* Add ata_dummy_port_info.

* Implement ata_pci_prepare_native_host(), a helper to alloc ATA host,
  acquire all resources and init the host in one go.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c |  6 ++++
 drivers/ata/libata-sff.c  | 67 +++++++++++++++++++++++++++++++++++++--
 include/linux/libata.h    |  5 +++
 3 files changed, 76 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8d3ae66572e9..2a38aa2841fd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6623,6 +6623,10 @@ const struct ata_port_operations ata_dummy_port_ops = {
 	.port_stop		= ata_dummy_noret,
 };
 
+const struct ata_port_info ata_dummy_port_info = {
+	.port_ops		= &ata_dummy_port_ops,
+};
+
 /*
  * libata is essentially a library of internal helper functions for
  * low-level ATA host controller drivers.  As such, the API/ABI is
@@ -6634,6 +6638,7 @@ EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
 EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
 EXPORT_SYMBOL_GPL(sata_deb_timing_long);
 EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
+EXPORT_SYMBOL_GPL(ata_dummy_port_info);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
 EXPORT_SYMBOL_GPL(ata_std_ports);
 EXPORT_SYMBOL_GPL(ata_host_init);
@@ -6727,6 +6732,7 @@ EXPORT_SYMBOL_GPL(ata_timing_merge);
 EXPORT_SYMBOL_GPL(pci_test_config_bits);
 EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
 EXPORT_SYMBOL_GPL(ata_pci_init_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
 #ifdef CONFIG_PM
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index d551fa1cb104..142120cab874 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -663,13 +663,12 @@ static int ata_pci_init_bmdma(struct ata_host *host)
 
 	for (i = 0; i < 2; i++) {
 		struct ata_port *ap = host->ports[i];
-		struct ata_ioports *ioaddr = &ap->ioaddr;
 		void __iomem *bmdma = host->iomap[4] + 8 * i;
 
 		if (ata_port_is_dummy(ap))
 			continue;
 
-		ioaddr->bmdma_addr = bmdma;
+		ap->ioaddr.bmdma_addr = bmdma;
 		if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
 		    (ioread8(bmdma + 2) & 0x80))
 			host->flags |= ATA_HOST_SIMPLEX;
@@ -742,6 +741,70 @@ int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask)
 	return 0;
 }
 
+/**
+ *	ata_pci_prepare_native_host - helper to prepare native PCI ATA host
+ *	@pdev: target PCI device
+ *	@ppi: array of port_info
+ *	@n_ports: number of ports to allocate
+ *	@r_host: out argument for the initialized ATA host
+ *
+ *	Helper to allocate ATA host for @pdev, acquire all native PCI
+ *	resources and initialize it accordingly in one go.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_pci_prepare_native_host(struct pci_dev *pdev,
+				const struct ata_port_info * const * ppi,
+				int n_ports, struct ata_host **r_host)
+{
+	struct ata_host *host;
+	unsigned int port_mask;
+	int rc;
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "failed to allocate ATA host\n");
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
+	port_mask = ATA_PORT_PRIMARY;
+	if (n_ports > 1)
+		port_mask |= ATA_PORT_SECONDARY;
+
+	rc = ata_pci_init_native_host(host, port_mask);
+	if (rc)
+		goto err_out;
+
+	/* init DMA related stuff */
+	rc = ata_pci_init_bmdma(host);
+	if (rc)
+		goto err_bmdma;
+
+	devres_remove_group(&pdev->dev, NULL);
+	*r_host = host;
+	return 0;
+
+ err_bmdma:
+	/* This is necessary because PCI and iomap resources are
+	 * merged and releasing the top group won't release the
+	 * acquired resources if some of those have been acquired
+	 * before entering this function.
+	 */
+	pcim_iounmap_regions(pdev, 0xf);
+ err_out:
+	devres_release_group(&pdev->dev, NULL);
+	return rc;
+}
+
 struct ata_legacy_devres {
 	unsigned int	mask;
 	unsigned long	cmd_port[2];
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 400429f9cd9d..5d32c157de60 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -668,6 +668,7 @@ struct ata_port_info {
 	unsigned long		mwdma_mask;
 	unsigned long		udma_mask;
 	const struct ata_port_operations *port_ops;
+	irq_handler_t		irq_handler;
 	void 			*private_data;
 };
 
@@ -690,6 +691,7 @@ extern const unsigned long sata_deb_timing_hotplug[];
 extern const unsigned long sata_deb_timing_long[];
 
 extern const struct ata_port_operations ata_dummy_port_ops;
+extern const struct ata_port_info ata_dummy_port_info;
 
 static inline const unsigned long *
 sata_ehc_deb_timing(struct ata_eh_context *ehc)
@@ -894,6 +896,9 @@ extern struct ata_probe_ent *
 ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
 extern int ata_pci_init_native_host(struct ata_host *host,
 				    unsigned int port_mask);
+extern int ata_pci_prepare_native_host(struct pci_dev *pdev,
+				const struct ata_port_info * const * ppi,
+				int n_ports, struct ata_host **r_host);
 extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
 extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long);
 #endif /* CONFIG_PCI */

From eca25dca17630ae354f4b1df559ed90578b794fe Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:07 +0900
Subject: [PATCH 70/86] libata: convert drivers with combined SATA/PATA ports
 to new init model

Convert sata_via and sata_promise to new init model.  Both controllers
can have combined configuration (SATA + PATA) and used twisted
initialization method (modifying port in ->port_start) to overcome
probe_ent limitations.

This patch converts both drivers to new init model in which such
configuration is natively supported.

* promise: Combined pata port now uses separate port_info entry right
  after the sata counterpart entry.

* promise: Controller configuration is discerned using ap->flags.
  This simplifies init path and makes it look more like other LLDs.

* via: Both SATA and PATA ports in vt6421 are represented in their
  own port_info structure.

Tested on PDC20375 (SATA150 TX2plus) [105a:3375] and PDC40775 (SATA
300 TX2plus) [105a:3d73].  Couldn't test via cuz my c3 won't boot the
current kernel.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_promise.c | 257 ++++++++++++++++---------------------
 drivers/ata/sata_via.c     | 176 +++++++++++--------------
 2 files changed, 185 insertions(+), 248 deletions(-)

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 8afde4a9ca7e..f56549b90aa6 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -49,6 +49,7 @@
 
 
 enum {
+	PDC_MAX_PORTS		= 4,
 	PDC_MMIO_BAR		= 3,
 
 	/* register offsets */
@@ -89,10 +90,12 @@ enum {
 				   | PDC1_ERR_MASK | PDC2_ERR_MASK),
 
 	board_2037x		= 0,	/* FastTrak S150 TX2plus */
-	board_20319		= 1,	/* FastTrak S150 TX4 */
-	board_20619		= 2,	/* FastTrak TX4000 */
-	board_2057x		= 3,	/* SATAII150 Tx2plus */
-	board_40518		= 4,	/* SATAII150 Tx4 */
+	board_2037x_pata	= 1,	/* FastTrak S150 TX2plus PATA port */
+	board_20319		= 2,	/* FastTrak S150 TX4 */
+	board_20619		= 3,	/* FastTrak TX4000 */
+	board_2057x		= 4,	/* SATAII150 Tx2plus */
+	board_2057x_pata	= 5,	/* SATAII150 Tx2plus */
+	board_40518		= 6,	/* SATAII150 Tx4 */
 
 	PDC_HAS_PATA		= (1 << 1), /* PDC20375/20575 has PATA */
 
@@ -115,8 +118,10 @@ enum {
 				  ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_POLLING,
 
-	/* hp->flags bits */
-	PDC_FLAG_GEN_II		= (1 << 0),
+	/* ap->flags bits */
+	PDC_FLAG_GEN_II		= (1 << 24),
+	PDC_FLAG_SATA_PATA	= (1 << 25), /* supports SATA + PATA */
+	PDC_FLAG_4_PORTS	= (1 << 26), /* 4 ports */
 };
 
 
@@ -125,16 +130,11 @@ struct pdc_port_priv {
 	dma_addr_t		pkt_dma;
 };
 
-struct pdc_host_priv {
-	unsigned long		flags;
-	unsigned long		port_flags[ATA_MAX_PORTS];
-};
-
 static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static irqreturn_t pdc_interrupt (int irq, void *dev_instance);
-static int pdc_port_start(struct ata_port *ap);
+static int pdc_common_port_start(struct ata_port *ap);
+static int pdc_sata_port_start(struct ata_port *ap);
 static void pdc_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
@@ -185,14 +185,13 @@ static const struct ata_port_operations pdc_sata_ops = {
 	.post_internal_cmd	= pdc_post_internal_cmd,
 	.cable_detect		= pdc_sata_cable_detect,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
 	.scr_read		= pdc_sata_scr_read,
 	.scr_write		= pdc_sata_scr_write,
-	.port_start		= pdc_port_start,
+	.port_start		= pdc_sata_port_start,
 };
 
 /* First-generation chips need a more restrictive ->check_atapi_dma op */
@@ -213,14 +212,13 @@ static const struct ata_port_operations pdc_old_sata_ops = {
 	.post_internal_cmd	= pdc_post_internal_cmd,
 	.cable_detect		= pdc_sata_cable_detect,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
 	.scr_read		= pdc_sata_scr_read,
 	.scr_write		= pdc_sata_scr_write,
-	.port_start		= pdc_port_start,
+	.port_start		= pdc_sata_port_start,
 };
 
 static const struct ata_port_operations pdc_pata_ops = {
@@ -240,29 +238,37 @@ static const struct ata_port_operations pdc_pata_ops = {
 	.post_internal_cmd	= pdc_post_internal_cmd,
 	.cable_detect		= pdc_pata_cable_detect,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= pdc_interrupt,
 	.irq_clear		= pdc_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
-	.port_start		= pdc_port_start,
+	.port_start		= pdc_common_port_start,
 };
 
 static const struct ata_port_info pdc_port_info[] = {
 	/* board_2037x */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
+				  PDC_FLAG_SATA_PATA,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &pdc_old_sata_ops,
 	},
 
+	/* board_2037x_pata */
+	{
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
+		.pio_mask	= 0x1f, /* pio0-4 */
+		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.port_ops	= &pdc_pata_ops,
+	},
+
 	/* board_20319 */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
+				  PDC_FLAG_4_PORTS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
@@ -271,8 +277,8 @@ static const struct ata_port_info pdc_port_info[] = {
 
 	/* board_20619 */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
+				  PDC_FLAG_4_PORTS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
@@ -281,18 +287,28 @@ static const struct ata_port_info pdc_port_info[] = {
 
 	/* board_2057x */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
+				  PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &pdc_sata_ops,
 	},
 
+	/* board_2057x_pata */
+	{
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
+				  PDC_FLAG_GEN_II,
+		.pio_mask	= 0x1f, /* pio0-4 */
+		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.port_ops	= &pdc_pata_ops,
+	},
+
 	/* board_40518 */
 	{
-		.sht		= &pdc_ata_sht,
-		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
+				  PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
@@ -358,7 +374,6 @@ static int pdc_common_port_start(struct ata_port *ap)
 
 static int pdc_sata_port_start(struct ata_port *ap)
 {
-	struct pdc_host_priv *hp = ap->host->private_data;
 	int rc;
 
 	rc = pdc_common_port_start(ap);
@@ -366,7 +381,7 @@ static int pdc_sata_port_start(struct ata_port *ap)
 		return rc;
 
 	/* fix up PHYMODE4 align timing */
-	if (hp->flags & PDC_FLAG_GEN_II) {
+	if (ap->flags & PDC_FLAG_GEN_II) {
 		void __iomem *mmio = (void __iomem *) ap->ioaddr.scr_addr;
 		unsigned int tmp;
 
@@ -378,21 +393,6 @@ static int pdc_sata_port_start(struct ata_port *ap)
 	return 0;
 }
 
-static int pdc_port_start(struct ata_port *ap)
-{
-	struct pdc_host_priv *hp = ap->host->private_data;
-
-	/* fix up port flags and cable type for SATA+PATA chips */
-	ap->flags |= hp->port_flags[ap->port_no];
-	if (ap->flags & ATA_FLAG_SATA) {
-		ap->cbl = ATA_CBL_SATA;
-		return pdc_sata_port_start(ap);
-	} else {
-		ap->ops = &pdc_pata_ops;
-		return pdc_common_port_start(ap);
-	}
-}
-
 static void pdc_reset_port(struct ata_port *ap)
 {
 	void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
@@ -660,11 +660,10 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap,
 {
 	unsigned int handled = 0;
 	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
-	struct pdc_host_priv *hp = ap->host->private_data;
 	u32 port_status, err_mask;
 
 	err_mask = PDC_ERR_MASK;
-	if (hp->flags & PDC_FLAG_GEN_II)
+	if (ap->flags & PDC_FLAG_GEN_II)
 		err_mask &= ~PDC1_ERR_MASK;
 	else
 		err_mask &= ~PDC2_ERR_MASK;
@@ -844,34 +843,34 @@ static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc)
 	return 1;
 }
 
-static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base,
-			       void __iomem *scr_addr)
+static void pdc_ata_setup_port(struct ata_port *ap,
+			       void __iomem *base, void __iomem *scr_addr)
 {
-	port->cmd_addr		= base;
-	port->data_addr		= base;
-	port->feature_addr	=
-	port->error_addr	= base + 0x4;
-	port->nsect_addr	= base + 0x8;
-	port->lbal_addr		= base + 0xc;
-	port->lbam_addr		= base + 0x10;
-	port->lbah_addr		= base + 0x14;
-	port->device_addr	= base + 0x18;
-	port->command_addr	=
-	port->status_addr	= base + 0x1c;
-	port->altstatus_addr	=
-	port->ctl_addr		= base + 0x38;
-	port->scr_addr		= scr_addr;
+	ap->ioaddr.cmd_addr		= base;
+	ap->ioaddr.data_addr		= base;
+	ap->ioaddr.feature_addr		=
+	ap->ioaddr.error_addr		= base + 0x4;
+	ap->ioaddr.nsect_addr		= base + 0x8;
+	ap->ioaddr.lbal_addr		= base + 0xc;
+	ap->ioaddr.lbam_addr		= base + 0x10;
+	ap->ioaddr.lbah_addr		= base + 0x14;
+	ap->ioaddr.device_addr		= base + 0x18;
+	ap->ioaddr.command_addr		=
+	ap->ioaddr.status_addr		= base + 0x1c;
+	ap->ioaddr.altstatus_addr	=
+	ap->ioaddr.ctl_addr		= base + 0x38;
+	ap->ioaddr.scr_addr		= scr_addr;
 }
 
 
-static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
+static void pdc_host_init(struct ata_host *host)
 {
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
-	struct pdc_host_priv *hp = pe->private_data;
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+	int is_gen2 = host->ports[0]->flags & PDC_FLAG_GEN_II;
 	int hotplug_offset;
 	u32 tmp;
 
-	if (hp->flags & PDC_FLAG_GEN_II)
+	if (is_gen2)
 		hotplug_offset = PDC2_SATA_PLUG_CSR;
 	else
 		hotplug_offset = PDC_SATA_PLUG_CSR;
@@ -885,7 +884,7 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
 	/* enable BMR_BURST, maybe change FIFO_SHD to 8 dwords */
 	tmp = readl(mmio + PDC_FLASH_CTL);
 	tmp |= 0x02000;	/* bit 13 (enable bmr burst) */
-	if (!(hp->flags & PDC_FLAG_GEN_II))
+	if (!is_gen2)
 		tmp |= 0x10000;	/* bit 16 (fifo threshold at 8 dw) */
 	writel(tmp, mmio + PDC_FLASH_CTL);
 
@@ -898,7 +897,7 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
 	writel(tmp | 0xff0000, mmio + hotplug_offset);
 
 	/* don't initialise TBG or SLEW on 2nd generation chips */
-	if (hp->flags & PDC_FLAG_GEN_II)
+	if (is_gen2)
 		return;
 
 	/* reduce TBG clock to 133 Mhz. */
@@ -920,16 +919,16 @@ static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
 static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
-	struct pdc_host_priv *hp;
+	const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
+	const struct ata_port_info *ppi[PDC_MAX_PORTS];
+	struct ata_host *host;
 	void __iomem *base;
-	unsigned int board_idx = (unsigned int) ent->driver_data;
-	int rc;
-	u8 tmp;
+	int n_ports, i, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* enable and acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -939,6 +938,37 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	base = pcim_iomap_table(pdev)[PDC_MMIO_BAR];
+
+	/* determine port configuration and setup host */
+	n_ports = 2;
+	if (pi->flags & PDC_FLAG_4_PORTS)
+		n_ports = 4;
+	for (i = 0; i < n_ports; i++)
+		ppi[i] = pi;
+
+	if (pi->flags & PDC_FLAG_SATA_PATA) {
+		u8 tmp = readb(base + PDC_FLASH_CTL+1);
+		if (!(tmp & 0x80)) {
+			ppi[n_ports++] = pi + 1;
+			dev_printk(KERN_INFO, &pdev->dev, "PATA port found\n");
+		}
+	}
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
+		return -ENOMEM;
+	}
+	host->iomap = pcim_iomap_table(pdev);
+
+	for (i = 0; i < host->n_ports; i++)
+		pdc_ata_setup_port(host->ports[i],
+				   base + 0x200 + i * 0x80,
+				   base + 0x400 + i * 0x100);
+
+	/* initialize adapter */
+	pdc_host_init(host);
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
@@ -947,81 +977,10 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	hp = devm_kzalloc(&pdev->dev, sizeof(*hp), GFP_KERNEL);
-	if (hp == NULL)
-		return -ENOMEM;
-
-	probe_ent->private_data = hp;
-
-	probe_ent->sht		= pdc_port_info[board_idx].sht;
-	probe_ent->port_flags	= pdc_port_info[board_idx].flags;
-	probe_ent->pio_mask	= pdc_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= pdc_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= pdc_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= pdc_port_info[board_idx].port_ops;
-
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	base = probe_ent->iomap[PDC_MMIO_BAR];
-
-	pdc_ata_setup_port(&probe_ent->port[0], base + 0x200, base + 0x400);
-	pdc_ata_setup_port(&probe_ent->port[1], base + 0x280, base + 0x500);
-
-	/* notice 4-port boards */
-	switch (board_idx) {
-	case board_40518:
-		hp->flags |= PDC_FLAG_GEN_II;
-		/* Fall through */
-	case board_20319:
-       		probe_ent->n_ports = 4;
-		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, base + 0x600);
-		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, base + 0x700);
-		break;
-	case board_2057x:
-		hp->flags |= PDC_FLAG_GEN_II;
-		/* Fall through */
-	case board_2037x:
-		/* TX2plus boards also have a PATA port */
-		tmp = readb(base + PDC_FLASH_CTL+1);
-		if (!(tmp & 0x80)) {
-			probe_ent->n_ports = 3;
-			pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
-			hp->port_flags[2] = ATA_FLAG_SLAVE_POSS;
-			printk(KERN_INFO DRV_NAME " PATA port found\n");
-		} else
-			probe_ent->n_ports = 2;
-		hp->port_flags[0] = ATA_FLAG_SATA;
-		hp->port_flags[1] = ATA_FLAG_SATA;
-		break;
-	case board_20619:
-		probe_ent->n_ports = 4;
-		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
-		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, NULL);
-		break;
-	default:
-		BUG();
-		break;
-	}
-
+	/* start host, request IRQ and attach */
 	pci_set_master(pdev);
-
-	/* initialize adapter */
-	pdc_host_init(board_idx, probe_ent);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, pdc_interrupt, IRQF_SHARED,
+				 &pdc_ata_sht);
 }
 
 
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 842ccf601224..1d855f55f5f7 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -64,8 +64,6 @@ enum {
 	PORT0			= (1 << 1),
 	PORT1			= (1 << 0),
 	ALL_PORTS		= PORT0 | PORT1,
-	PATA_PORT		= 2,	/* PATA is port 2 */
-	N_PORTS			= 3,
 
 	NATIVE_MODE_ALL		= (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
 
@@ -81,7 +79,6 @@ static void vt6420_error_handler(struct ata_port *ap);
 static int vt6421_pata_cable_detect(struct ata_port *ap);
 static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
 static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
-static int vt6421_port_start(struct ata_port *ap);
 
 static const struct pci_device_id svia_pci_tbl[] = {
 	{ PCI_VDEVICE(VIA, 0x5337), vt6420 },
@@ -140,7 +137,6 @@ static const struct ata_port_operations vt6420_sata_ops = {
 	.error_handler		= vt6420_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -175,12 +171,11 @@ static const struct ata_port_operations vt6421_pata_ops = {
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= vt6421_pata_cable_detect,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
-	.port_start		= vt6421_port_start,
+	.port_start		= ata_port_start,
 };
 
 static const struct ata_port_operations vt6421_sata_ops = {
@@ -207,7 +202,6 @@ static const struct ata_port_operations vt6421_sata_ops = {
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= ata_cable_sata,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -215,11 +209,10 @@ static const struct ata_port_operations vt6421_sata_ops = {
 	.scr_read		= svia_scr_read,
 	.scr_write		= svia_scr_write,
 
-	.port_start		= vt6421_port_start,
+	.port_start		= ata_port_start,
 };
 
-static struct ata_port_info vt6420_port_info = {
-	.sht		= &svia_sht,
+static const struct ata_port_info vt6420_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x07,
@@ -227,6 +220,22 @@ static struct ata_port_info vt6420_port_info = {
 	.port_ops	= &vt6420_sata_ops,
 };
 
+static struct ata_port_info vt6421_sport_info = {
+	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+	.pio_mask	= 0x1f,
+	.mwdma_mask	= 0x07,
+	.udma_mask	= 0x7f,
+	.port_ops	= &vt6421_sata_ops,
+};
+
+static struct ata_port_info vt6421_pport_info = {
+	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY,
+	.pio_mask	= 0x1f,
+	.mwdma_mask	= 0,
+	.udma_mask	= 0x7f,
+	.port_ops	= &vt6421_pata_ops,
+};
+
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
 MODULE_LICENSE("GPL");
@@ -356,16 +365,6 @@ static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
 	pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->pio_mode - XFER_UDMA_0]);
 }
 
-static int vt6421_port_start(struct ata_port *ap)
-{
-	if (ap->port_no == PATA_PORT) {
-		ap->ops = &vt6421_pata_ops;
-		ap->mwdma_mask = 0;
-		ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST;
-	}
-	return ata_port_start(ap);
-}
-
 static const unsigned int svia_bar_sizes[] = {
 	8, 4, 8, 4, 16, 256
 };
@@ -384,79 +383,78 @@ static void __iomem * vt6421_scr_addr(void __iomem *addr, unsigned int port)
 	return addr + (port * 64);
 }
 
-static void vt6421_init_addrs(struct ata_probe_ent *probe_ent,
-			      void __iomem * const *iomap, unsigned int port)
+static void vt6421_init_addrs(struct ata_port *ap)
 {
-	void __iomem *reg_addr = iomap[port];
-	void __iomem *bmdma_addr = iomap[4] + (port * 8);
+	void __iomem * const * iomap = ap->host->iomap;
+	void __iomem *reg_addr = iomap[ap->port_no];
+	void __iomem *bmdma_addr = iomap[4] + (ap->port_no * 8);
+	struct ata_ioports *ioaddr = &ap->ioaddr;
 
-	probe_ent->port[port].cmd_addr = reg_addr;
-	probe_ent->port[port].altstatus_addr =
-	probe_ent->port[port].ctl_addr = (void __iomem *)
+	ioaddr->cmd_addr = reg_addr;
+	ioaddr->altstatus_addr =
+	ioaddr->ctl_addr = (void __iomem *)
 		((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS);
-	probe_ent->port[port].bmdma_addr = bmdma_addr;
-	probe_ent->port[port].scr_addr = vt6421_scr_addr(iomap[5], port);
+	ioaddr->bmdma_addr = bmdma_addr;
+	ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
 
-	ata_std_ports(&probe_ent->port[port]);
+	ata_std_ports(ioaddr);
 }
 
-static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
+static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 {
-	struct ata_probe_ent *probe_ent;
-	struct ata_port_info *ppi[2];
-	void __iomem *bar5;
+	const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL };
+	struct ata_host *host;
+	int rc;
 
-	ppi[0] = ppi[1] = &vt6420_port_info;
-	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-	if (!probe_ent)
-		return NULL;
+	rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+	if (rc)
+		return rc;
+	*r_host = host;
 
-	bar5 = pcim_iomap(pdev, 5, 0);
-	if (!bar5) {
+	rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+	if (rc) {
 		dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
-		return NULL;
+		return rc;
 	}
 
-	probe_ent->port[0].scr_addr = svia_scr_addr(bar5, 0);
-	probe_ent->port[1].scr_addr = svia_scr_addr(bar5, 1);
+	host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0);
+	host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1);
 
-	return probe_ent;
+	return 0;
 }
 
-static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
+static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 {
-	struct ata_probe_ent *probe_ent;
-	unsigned int i;
+	const struct ata_port_info *ppi[] =
+		{ &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info };
+	struct ata_host *host;
+	int i, rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (!probe_ent)
-		return NULL;
+	*r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi));
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
+		return -ENOMEM;
+	}
 
-	memset(probe_ent, 0, sizeof(*probe_ent));
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
+	rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME);
+	if (rc) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap "
+			   "PCI BARs (errno=%d)\n", rc);
+		return rc;
+	}
+	host->iomap = pcim_iomap_table(pdev);
 
-	probe_ent->sht		= &svia_sht;
-	probe_ent->port_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY;
-	probe_ent->port_ops	= &vt6421_sata_ops;
-	probe_ent->n_ports	= N_PORTS;
-	probe_ent->irq		= pdev->irq;
-	probe_ent->irq_flags	= IRQF_SHARED;
-	probe_ent->pio_mask	= 0x1f;
-	probe_ent->mwdma_mask	= 0x07;
-	probe_ent->udma_mask	= 0x7f;
+	for (i = 0; i < host->n_ports; i++)
+		vt6421_init_addrs(host->ports[i]);
 
-	for (i = 0; i < 6; i++)
-		if (!pcim_iomap(pdev, i, 0)) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "failed to iomap PCI BAR %d\n", i);
-			return NULL;
-		}
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
 
-	for (i = 0; i < N_PORTS; i++)
-		vt6421_init_addrs(probe_ent, pcim_iomap_table(pdev), i);
-
-	return probe_ent;
+	return 0;
 }
 
 static void svia_configure(struct pci_dev *pdev)
@@ -503,7 +501,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	static int printed_version;
 	unsigned int i;
 	int rc;
-	struct ata_probe_ent *probe_ent;
+	struct ata_host *host;
 	int board_id = (int) ent->driver_data;
 	const int *bar_sizes;
 	u8 tmp8;
@@ -515,12 +513,6 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
-		pcim_pin_device(pdev);
-		return rc;
-	}
-
 	if (board_id == vt6420) {
 		pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
 		if (tmp8 & SATA_2DEV) {
@@ -546,32 +538,18 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 			return -ENODEV;
 		}
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-
 	if (board_id == vt6420)
-		probe_ent = vt6420_init_probe_ent(pdev);
+		rc = vt6420_prepare_host(pdev, &host);
 	else
-		probe_ent = vt6421_init_probe_ent(pdev);
-
-	if (!probe_ent) {
-		dev_printk(KERN_ERR, &pdev->dev, "out of memory\n");
-		return -ENOMEM;
-	}
+		rc = vt6421_prepare_host(pdev, &host);
+	if (rc)
+		return rc;
 
 	svia_configure(pdev);
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &svia_sht);
 }
 
 static int __init svia_init(void)

From 9a829ccfc833269bdb85751f5048288ab93678ac Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:08 +0900
Subject: [PATCH 71/86] libata: convert ata_pci_init_native_mode() users to new
 init model

Convert drivers which use ata_pci_init_native_mode() to new init
model.  ata_pci_init_native_host() is used instead.  sata_nv, sata_uli
and sata_sis are in this category.

Tested on nVidia Corporation CK804 Serial ATA Controller [10de:0054]
in both BMDMA and ADMA mode.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/sata_nv.c  | 99 +++++++++++++++++-------------------------
 drivers/ata/sata_sis.c | 50 +++++++--------------
 drivers/ata/sata_uli.c | 65 ++++++++++-----------------
 3 files changed, 81 insertions(+), 133 deletions(-)

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 8a9473b16ec3..02169740ed24 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -369,7 +369,6 @@ static const struct ata_port_operations nv_generic_ops = {
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= nv_generic_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -396,7 +395,6 @@ static const struct ata_port_operations nv_nf2_ops = {
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= nv_nf2_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -423,7 +421,6 @@ static const struct ata_port_operations nv_ck804_ops = {
 	.error_handler		= nv_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= nv_ck804_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -452,7 +449,6 @@ static const struct ata_port_operations nv_adma_ops = {
 	.error_handler		= nv_adma_error_handler,
 	.post_internal_cmd	= nv_adma_post_internal_cmd,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= nv_adma_interrupt,
 	.irq_clear		= nv_adma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -477,6 +473,7 @@ static struct ata_port_info nv_port_info[] = {
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_generic_ops,
+		.irq_handler	= nv_generic_interrupt,
 	},
 	/* nforce2/3 */
 	{
@@ -487,6 +484,7 @@ static struct ata_port_info nv_port_info[] = {
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_nf2_ops,
+		.irq_handler	= nv_nf2_interrupt,
 	},
 	/* ck804 */
 	{
@@ -497,6 +495,7 @@ static struct ata_port_info nv_port_info[] = {
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_ck804_ops,
+		.irq_handler	= nv_ck804_interrupt,
 	},
 	/* ADMA */
 	{
@@ -508,6 +507,7 @@ static struct ata_port_info nv_port_info[] = {
 		.mwdma_mask	= NV_MWDMA_MASK,
 		.udma_mask	= NV_UDMA_MASK,
 		.port_ops	= &nv_adma_ops,
+		.irq_handler	= nv_adma_interrupt,
 	},
 };
 
@@ -1079,14 +1079,14 @@ static int nv_adma_port_resume(struct ata_port *ap)
 }
 #endif
 
-static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int port)
+static void nv_adma_setup_port(struct ata_port *ap)
 {
-	void __iomem *mmio = probe_ent->iomap[NV_MMIO_BAR];
-	struct ata_ioports *ioport = &probe_ent->port[port];
+	void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR];
+	struct ata_ioports *ioport = &ap->ioaddr;
 
 	VPRINTK("ENTER\n");
 
-	mmio += NV_ADMA_PORT + port * NV_ADMA_PORT_SIZE;
+	mmio += NV_ADMA_PORT + ap->port_no * NV_ADMA_PORT_SIZE;
 
 	ioport->cmd_addr	= mmio;
 	ioport->data_addr	= mmio + (ATA_REG_DATA * 4);
@@ -1103,9 +1103,9 @@ static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int por
 	ioport->ctl_addr	= mmio + 0x20;
 }
 
-static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
+static int nv_adma_host_init(struct ata_host *host)
 {
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+	struct pci_dev *pdev = to_pci_dev(host->dev);
 	unsigned int i;
 	u32 tmp32;
 
@@ -1120,8 +1120,8 @@ static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
 
 	pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
 
-	for (i = 0; i < probe_ent->n_ports; i++)
-		nv_adma_setup_port(probe_ent, i);
+	for (i = 0; i < host->n_ports; i++)
+		nv_adma_setup_port(host->ports[i]);
 
 	return 0;
 }
@@ -1480,14 +1480,13 @@ static void nv_adma_error_handler(struct ata_port *ap)
 static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version = 0;
-	struct ata_port_info *ppi[2];
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[2];
+	struct ata_host *host;
 	struct nv_host_priv *hpriv;
 	int rc;
 	u32 bar;
 	void __iomem *base;
 	unsigned long type = ent->driver_data;
-	int mask_set = 0;
 
         // Make sure this is a SATA controller by counting the number of bars
         // (NVIDIA SATA controllers will always have six bars).  Otherwise,
@@ -1503,50 +1502,38 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
-		pcim_pin_device(pdev);
-		return rc;
-	}
-
-	if(type >= CK804 && adma_enabled) {
+	/* determine type and allocate host */
+	if (type >= CK804 && adma_enabled) {
 		dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
 		type = ADMA;
-		if(!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
-		   !pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
-			mask_set = 1;
 	}
 
-	if(!mask_set) {
-		rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-		if (rc)
-			return rc;
-		rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-		if (rc)
-			return rc;
-	}
-
-	rc = -ENOMEM;
+	ppi[0] = ppi[1] = &nv_port_info[type];
+	rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+	if (rc)
+		return rc;
 
 	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
-
-	ppi[0] = ppi[1] = &nv_port_info[type];
-	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-	if (!probe_ent)
-		return -ENOMEM;
-
-	if (!pcim_iomap(pdev, NV_MMIO_BAR, 0))
-		return -EIO;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	probe_ent->private_data = hpriv;
 	hpriv->type = type;
+	host->private_data = hpriv;
 
-	base = probe_ent->iomap[NV_MMIO_BAR];
-	probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
-	probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
+	/* set 64bit dma masks, may fail */
+	if (type == ADMA) {
+		if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0)
+			pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+	}
+
+	/* request and iomap NV_MMIO_BAR */
+	rc = pcim_iomap_regions(pdev, 1 << NV_MMIO_BAR, DRV_NAME);
+	if (rc)
+		return rc;
+
+	/* configure SCR access */
+	base = host->iomap[NV_MMIO_BAR];
+	host->ports[0]->ioaddr.scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
+	host->ports[1]->ioaddr.scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
 
 	/* enable SATA space for CK804 */
 	if (type >= CK804) {
@@ -1557,20 +1544,16 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
 	}
 
-	pci_set_master(pdev);
-
+	/* init ADMA */
 	if (type == ADMA) {
-		rc = nv_adma_host_init(probe_ent);
+		rc = nv_adma_host_init(host);
 		if (rc)
 			return rc;
 	}
 
-	rc = ata_device_add(probe_ent);
-	if (rc != NV_PORTS)
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler,
+				 IRQF_SHARED, ppi[0]->sht);
 }
 
 static void nv_remove_one (struct pci_dev *pdev)
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index a787f0d4a5ba..d8ee062e82fc 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -121,7 +121,6 @@ static const struct ata_port_operations sis_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -131,7 +130,6 @@ static const struct ata_port_operations sis_ops = {
 };
 
 static struct ata_port_info sis_port_info = {
-	.sht		= &sis_sht,
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x7,
@@ -256,12 +254,13 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent = NULL;
-	int rc;
+	struct ata_port_info pi = sis_port_info;
+	const struct ata_port_info *ppi[2] = { &pi, &pi };
+	struct ata_host *host;
 	u32 genctl, val;
-	struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
 	u8 pmr;
 	u8 port2_start = 0x20;
+	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -270,19 +269,6 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
-		pcim_pin_device(pdev);
-		return rc;
-	}
-
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-
 	/* check and see if the SCRs are in IO space or PCI cfg space */
 	pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
 	if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
@@ -349,30 +335,26 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-	if (!probe_ent)
-		return -ENOMEM;
+	rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host);
+	if (rc)
+		return rc;
 
-	if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
+	if (!(pi.flags & SIS_FLAG_CFGSCR)) {
 		void __iomem *mmio;
 
-		mmio = pcim_iomap(pdev, SIS_SCR_PCI_BAR, 0);
-		if (!mmio)
-			return -ENOMEM;
+		rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME);
+		if (rc)
+			return rc;
+		mmio = host->iomap[SIS_SCR_PCI_BAR];
 
-		probe_ent->port[0].scr_addr = mmio;
-		probe_ent->port[1].scr_addr = mmio + port2_start;
+		host->ports[0]->ioaddr.scr_addr = mmio;
+		host->ports[1]->ioaddr.scr_addr = mmio + port2_start;
 	}
 
 	pci_set_master(pdev);
 	pci_intx(pdev, 1);
-
-	if (!ata_device_add(probe_ent))
-		return -EIO;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
-
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &sis_sht);
 }
 
 static int __init sis_init(void)
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index d659ace80f4f..f74e383de083 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -115,7 +115,6 @@ static const struct ata_port_operations uli_ops = {
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -127,7 +126,6 @@ static const struct ata_port_operations uli_ops = {
 };
 
 static struct ata_port_info uli_port_info = {
-	.sht            = &uli_sht,
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 			  ATA_FLAG_IGN_SIMPLEX,
 	.pio_mask       = 0x1f,		/* pio0-4 */
@@ -185,12 +183,13 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
-	struct ata_port_info *ppi[2];
-	int rc;
+	const struct ata_port_info *ppi[] = { &uli_port_info, NULL };
 	unsigned int board_idx = (unsigned int) ent->driver_data;
+	struct ata_host *host;
 	struct uli_priv *hpriv;
 	void __iomem * const *iomap;
+	struct ata_ioports *ioaddr;
+	int n_ports, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -199,54 +198,42 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
-		pcim_pin_device(pdev);
-		return rc;
-	}
-
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	n_ports = 2;
+	if (board_idx == uli_5287)
+		n_ports = 4;
+	rc = ata_pci_prepare_native_host(pdev, ppi, n_ports, &host);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
-	if (rc)
-		return rc;
-
-	ppi[0] = ppi[1] = &uli_port_info;
-	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
-	if (!probe_ent)
-		return -ENOMEM;
 
 	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
+	host->private_data = hpriv;
 
-	probe_ent->private_data = hpriv;
-
-	iomap = pcim_iomap_table(pdev);
+	iomap = host->iomap;
 
 	switch (board_idx) {
 	case uli_5287:
 		hpriv->scr_cfg_addr[0] = ULI5287_BASE;
 		hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
-       		probe_ent->n_ports = 4;
 
-		probe_ent->port[2].cmd_addr = iomap[0] + 8;
-		probe_ent->port[2].altstatus_addr =
-		probe_ent->port[2].ctl_addr = (void __iomem *)
+		ioaddr = &host->ports[2]->ioaddr;
+		ioaddr->cmd_addr = iomap[0] + 8;
+		ioaddr->altstatus_addr =
+		ioaddr->ctl_addr = (void __iomem *)
 			((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
-		probe_ent->port[2].bmdma_addr = iomap[4] + 16;
+		ioaddr->bmdma_addr = iomap[4] + 16;
 		hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
+		ata_std_ports(ioaddr);
 
-		probe_ent->port[3].cmd_addr = iomap[2] + 8;
-		probe_ent->port[3].altstatus_addr =
-		probe_ent->port[3].ctl_addr = (void __iomem *)
+		ioaddr = &host->ports[3]->ioaddr;
+		ioaddr->cmd_addr = iomap[2] + 8;
+		ioaddr->altstatus_addr =
+		ioaddr->ctl_addr = (void __iomem *)
 			((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
-		probe_ent->port[3].bmdma_addr = iomap[4] + 24;
+		ioaddr->bmdma_addr = iomap[4] + 24;
 		hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
-
-		ata_std_ports(&probe_ent->port[2]);
-		ata_std_ports(&probe_ent->port[3]);
+		ata_std_ports(ioaddr);
 		break;
 
 	case uli_5289:
@@ -266,12 +253,8 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_master(pdev);
 	pci_intx(pdev, 1);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &uli_sht);
 }
 
 static int __init uli_init(void)

From 4447d35156169cf136e829eb6b5cac2d6370f2d9 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:08 +0900
Subject: [PATCH 72/86] libata: convert the remaining SATA drivers to new init
 model

Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.

Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths.  This simplifies code quite a bit.

* init_one()'s now follow more consistent init order

* ahci_setup_port() and ahci_host_init() collapsed into
  ahci_init_one() for init order consistency

* sata_vsc uses port_info instead of setting fields manually

* in sata_svw, k2_board_info converted to port_info (info is now in
  port flags).  port number is honored now.

Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ahci.c          | 327 +++++++++++++++---------------------
 drivers/ata/sata_inic162x.c |  78 ++++-----
 drivers/ata/sata_mv.c       | 105 +++++-------
 drivers/ata/sata_qstor.c    |  62 +++----
 drivers/ata/sata_sil.c      |  87 ++++------
 drivers/ata/sata_sil24.c    | 111 +++++-------
 drivers/ata/sata_svw.c      | 107 ++++++------
 drivers/ata/sata_sx4.c      | 150 +++++++----------
 drivers/ata/sata_vsc.c      |  72 +++-----
 9 files changed, 443 insertions(+), 656 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fe4f0fe36bfb..7c61bc7ebd71 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -211,7 +211,6 @@ static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
-static irqreturn_t ahci_interrupt (int irq, void *dev_instance);
 static void ahci_irq_clear(struct ata_port *ap);
 static int ahci_port_start(struct ata_port *ap);
 static void ahci_port_stop(struct ata_port *ap);
@@ -265,7 +264,6 @@ static const struct ata_port_operations ahci_ops = {
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
 
-	.irq_handler		= ahci_interrupt,
 	.irq_clear		= ahci_irq_clear,
 	.irq_on			= ata_dummy_irq_on,
 	.irq_ack		= ata_dummy_irq_ack,
@@ -300,7 +298,6 @@ static const struct ata_port_operations ahci_vt8251_ops = {
 	.qc_prep		= ahci_qc_prep,
 	.qc_issue		= ahci_qc_issue,
 
-	.irq_handler		= ahci_interrupt,
 	.irq_clear		= ahci_irq_clear,
 	.irq_on			= ata_dummy_irq_on,
 	.irq_ack		= ata_dummy_irq_ack,
@@ -326,7 +323,6 @@ static const struct ata_port_operations ahci_vt8251_ops = {
 static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
-		.sht		= &ahci_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
 				  ATA_FLAG_SKIP_D2H_BSY,
@@ -336,7 +332,6 @@ static const struct ata_port_info ahci_port_info[] = {
 	},
 	/* board_ahci_pi */
 	{
-		.sht		= &ahci_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
 				  ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_HONOR_PI,
@@ -346,7 +341,6 @@ static const struct ata_port_info ahci_port_info[] = {
 	},
 	/* board_ahci_vt8251 */
 	{
-		.sht		= &ahci_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
 				  ATA_FLAG_SKIP_D2H_BSY |
@@ -357,7 +351,6 @@ static const struct ata_port_info ahci_port_info[] = {
 	},
 	/* board_ahci_ign_iferr */
 	{
-		.sht		= &ahci_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
 				  ATA_FLAG_SKIP_D2H_BSY |
@@ -473,15 +466,18 @@ static inline int ahci_nr_ports(u32 cap)
 	return (cap & 0x1f) + 1;
 }
 
-static inline void __iomem *ahci_port_base(void __iomem *base,
-					   unsigned int port)
+static inline void __iomem *ahci_port_base(struct ata_port *ap)
 {
-	return base + 0x100 + (port * 0x80);
+	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+
+	return mmio + 0x100 + (ap->port_no * 0x80);
 }
 
 /**
  *	ahci_save_initial_config - Save and fixup initial config values
- *	@probe_ent: probe_ent of target device
+ *	@pdev: target PCI device
+ *	@pi: associated ATA port info
+ *	@hpriv: host private area to store config values
  *
  *	Some registers containing configuration info might be setup by
  *	BIOS and might be cleared on reset.  This function saves the
@@ -493,10 +489,11 @@ static inline void __iomem *ahci_port_base(void __iomem *base,
  *	LOCKING:
  *	None.
  */
-static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
+static void ahci_save_initial_config(struct pci_dev *pdev,
+				     const struct ata_port_info *pi,
+				     struct ahci_host_priv *hpriv)
 {
-	struct ahci_host_priv *hpriv = probe_ent->private_data;
-	void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
+	void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
 	u32 cap, port_map;
 	int i;
 
@@ -509,7 +506,7 @@ static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
 	/* fixup zero port_map */
 	if (!port_map) {
 		port_map = (1 << ahci_nr_ports(hpriv->cap)) - 1;
-		dev_printk(KERN_WARNING, probe_ent->dev,
+		dev_printk(KERN_WARNING, &pdev->dev,
 			   "PORTS_IMPL is zero, forcing 0x%x\n", port_map);
 
 		/* write the fixed up value to the PI register */
@@ -517,7 +514,7 @@ static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
 	}
 
 	/* cross check port_map and cap.n_ports */
-	if (probe_ent->port_flags & AHCI_FLAG_HONOR_PI) {
+	if (pi->flags & AHCI_FLAG_HONOR_PI) {
 		u32 tmp_port_map = port_map;
 		int n_ports = ahci_nr_ports(cap);
 
@@ -532,7 +529,7 @@ static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
 		 * port_map is used to determine number of ports.
 		 */
 		if (n_ports || tmp_port_map)
-			dev_printk(KERN_WARNING, probe_ent->dev,
+			dev_printk(KERN_WARNING, &pdev->dev,
 				   "nr_ports (%u) and implemented port map "
 				   "(0x%x) don't match\n",
 				   ahci_nr_ports(cap), port_map);
@@ -548,17 +545,18 @@ static void ahci_save_initial_config(struct ata_probe_ent *probe_ent)
 
 /**
  *	ahci_restore_initial_config - Restore initial config
- *	@mmio: MMIO base for the host
- *	@hpriv: host private data
+ *	@host: target ATA host
  *
  *	Restore initial config stored by ahci_save_initial_config().
  *
  *	LOCKING:
  *	None.
  */
-static void ahci_restore_initial_config(void __iomem *mmio,
-					struct ahci_host_priv *hpriv)
+static void ahci_restore_initial_config(struct ata_host *host)
 {
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+
 	writel(hpriv->saved_cap, mmio + HOST_CAP);
 	writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
 	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
@@ -598,8 +596,9 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in,
 	writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
 }
 
-static void ahci_start_engine(void __iomem *port_mmio)
+static void ahci_start_engine(struct ata_port *ap)
 {
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
 	/* start DMA */
@@ -609,8 +608,9 @@ static void ahci_start_engine(void __iomem *port_mmio)
 	readl(port_mmio + PORT_CMD); /* flush */
 }
 
-static int ahci_stop_engine(void __iomem *port_mmio)
+static int ahci_stop_engine(struct ata_port *ap)
 {
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
 	tmp = readl(port_mmio + PORT_CMD);
@@ -632,19 +632,23 @@ static int ahci_stop_engine(void __iomem *port_mmio)
 	return 0;
 }
 
-static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap,
-			      dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma)
+static void ahci_start_fis_rx(struct ata_port *ap)
 {
+	void __iomem *port_mmio = ahci_port_base(ap);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct ahci_port_priv *pp = ap->private_data;
 	u32 tmp;
 
 	/* set FIS registers */
-	if (cap & HOST_CAP_64)
-		writel((cmd_slot_dma >> 16) >> 16, port_mmio + PORT_LST_ADDR_HI);
-	writel(cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
+	if (hpriv->cap & HOST_CAP_64)
+		writel((pp->cmd_slot_dma >> 16) >> 16,
+		       port_mmio + PORT_LST_ADDR_HI);
+	writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
 
-	if (cap & HOST_CAP_64)
-		writel((rx_fis_dma >> 16) >> 16, port_mmio + PORT_FIS_ADDR_HI);
-	writel(rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
+	if (hpriv->cap & HOST_CAP_64)
+		writel((pp->rx_fis_dma >> 16) >> 16,
+		       port_mmio + PORT_FIS_ADDR_HI);
+	writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
 
 	/* enable FIS reception */
 	tmp = readl(port_mmio + PORT_CMD);
@@ -655,8 +659,9 @@ static void ahci_start_fis_rx(void __iomem *port_mmio, u32 cap,
 	readl(port_mmio + PORT_CMD);
 }
 
-static int ahci_stop_fis_rx(void __iomem *port_mmio)
+static int ahci_stop_fis_rx(struct ata_port *ap)
 {
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
 	/* disable FIS reception */
@@ -673,14 +678,16 @@ static int ahci_stop_fis_rx(void __iomem *port_mmio)
 	return 0;
 }
 
-static void ahci_power_up(void __iomem *port_mmio, u32 cap)
+static void ahci_power_up(struct ata_port *ap)
 {
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 cmd;
 
 	cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
 
 	/* spin up device */
-	if (cap & HOST_CAP_SSS) {
+	if (hpriv->cap & HOST_CAP_SSS) {
 		cmd |= PORT_CMD_SPIN_UP;
 		writel(cmd, port_mmio + PORT_CMD);
 	}
@@ -690,11 +697,13 @@ static void ahci_power_up(void __iomem *port_mmio, u32 cap)
 }
 
 #ifdef CONFIG_PM
-static void ahci_power_down(void __iomem *port_mmio, u32 cap)
+static void ahci_power_down(struct ata_port *ap)
 {
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 cmd, scontrol;
 
-	if (!(cap & HOST_CAP_SSS))
+	if (!(hpriv->cap & HOST_CAP_SSS))
 		return;
 
 	/* put device into listen mode, first set PxSCTL.DET to 0 */
@@ -709,29 +718,28 @@ static void ahci_power_down(void __iomem *port_mmio, u32 cap)
 }
 #endif
 
-static void ahci_init_port(void __iomem *port_mmio, u32 cap,
-			   dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma)
+static void ahci_init_port(struct ata_port *ap)
 {
 	/* enable FIS reception */
-	ahci_start_fis_rx(port_mmio, cap, cmd_slot_dma, rx_fis_dma);
+	ahci_start_fis_rx(ap);
 
 	/* enable DMA */
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
 }
 
-static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg)
+static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
 {
 	int rc;
 
 	/* disable DMA */
-	rc = ahci_stop_engine(port_mmio);
+	rc = ahci_stop_engine(ap);
 	if (rc) {
 		*emsg = "failed to stop engine";
 		return rc;
 	}
 
 	/* disable FIS reception */
-	rc = ahci_stop_fis_rx(port_mmio);
+	rc = ahci_stop_fis_rx(ap);
 	if (rc) {
 		*emsg = "failed stop FIS RX";
 		return rc;
@@ -740,9 +748,10 @@ static int ahci_deinit_port(void __iomem *port_mmio, u32 cap, const char **emsg)
 	return 0;
 }
 
-static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev,
-				 struct ahci_host_priv *hpriv)
+static int ahci_reset_controller(struct ata_host *host)
 {
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 	u32 tmp;
 
 	/* global controller reset */
@@ -759,7 +768,7 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev,
 
 	tmp = readl(mmio + HOST_CTL);
 	if (tmp & HOST_RESET) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		dev_printk(KERN_ERR, host->dev,
 			   "controller reset failed (0x%x)\n", tmp);
 		return -EIO;
 	}
@@ -769,7 +778,7 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev,
 	(void) readl(mmio + HOST_CTL);	/* flush */
 
 	/* some registers might be cleared on reset.  restore initial values */
-	ahci_restore_initial_config(mmio, hpriv);
+	ahci_restore_initial_config(host);
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		u16 tmp16;
@@ -783,23 +792,23 @@ static int ahci_reset_controller(void __iomem *mmio, struct pci_dev *pdev,
 	return 0;
 }
 
-static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev,
-				 int n_ports, unsigned int port_flags,
-				 struct ahci_host_priv *hpriv)
+static void ahci_init_controller(struct ata_host *host)
 {
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 	int i, rc;
 	u32 tmp;
 
-	for (i = 0; i < n_ports; i++) {
-		void __iomem *port_mmio = ahci_port_base(mmio, i);
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		void __iomem *port_mmio = ahci_port_base(ap);
 		const char *emsg = NULL;
 
-		if ((port_flags & AHCI_FLAG_HONOR_PI) &&
-		    !(hpriv->port_map & (1 << i)))
+		if (ata_port_is_dummy(ap))
 			continue;
 
 		/* make sure port is not active */
-		rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
+		rc = ahci_deinit_port(ap, &emsg);
 		if (rc)
 			dev_printk(KERN_WARNING, &pdev->dev,
 				   "%s (%d)\n", emsg, rc);
@@ -827,7 +836,7 @@ static void ahci_init_controller(void __iomem *mmio, struct pci_dev *pdev,
 
 static unsigned int ahci_dev_classify(struct ata_port *ap)
 {
-	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	struct ata_taskfile tf;
 	u32 tmp;
 
@@ -877,8 +886,7 @@ static int ahci_clo(struct ata_port *ap)
 static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 {
 	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	void __iomem *port_mmio = ahci_port_base(ap);
 	const u32 cmd_fis_len = 5; /* five dwords */
 	const char *reason = NULL;
 	struct ata_taskfile tf;
@@ -895,7 +903,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	}
 
 	/* prepare for SRST (AHCI-1.1 10.4.1) */
-	rc = ahci_stop_engine(port_mmio);
+	rc = ahci_stop_engine(ap);
 	if (rc) {
 		reason = "failed to stop engine";
 		goto fail_restart;
@@ -915,7 +923,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	}
 
 	/* restart engine */
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
 
 	ata_tf_init(ap->device, &tf);
 	fis = pp->cmd_tbl;
@@ -974,7 +982,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
 	return 0;
 
  fail_restart:
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
  fail:
 	ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
 	return rc;
@@ -985,13 +993,11 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
 	struct ahci_port_priv *pp = ap->private_data;
 	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
 	struct ata_taskfile tf;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	int rc;
 
 	DPRINTK("ENTER\n");
 
-	ahci_stop_engine(port_mmio);
+	ahci_stop_engine(ap);
 
 	/* clear D2H reception area to properly wait for D2H FIS */
 	ata_tf_init(ap->device, &tf);
@@ -1000,7 +1006,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
 
 	rc = sata_std_hardreset(ap, class);
 
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
 
 	if (rc == 0 && ata_port_online(ap))
 		*class = ahci_dev_classify(ap);
@@ -1013,20 +1019,18 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
 
 static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	int rc;
 
 	DPRINTK("ENTER\n");
 
-	ahci_stop_engine(port_mmio);
+	ahci_stop_engine(ap);
 
 	rc = sata_port_hardreset(ap, sata_ehc_deb_timing(&ap->eh_context));
 
 	/* vt8251 needs SError cleared for the port to operate */
 	ahci_scr_write(ap, SCR_ERROR, ahci_scr_read(ap, SCR_ERROR));
 
-	ahci_start_engine(port_mmio);
+	ahci_start_engine(ap);
 
 	DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
 
@@ -1038,7 +1042,7 @@ static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class)
 
 static void ahci_postreset(struct ata_port *ap, unsigned int *class)
 {
-	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 new_tmp, tmp;
 
 	ata_std_postreset(ap, class);
@@ -1206,8 +1210,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 
 static void ahci_host_intr(struct ata_port *ap)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
 	struct ata_eh_info *ehi = &ap->eh_info;
 	struct ahci_port_priv *pp = ap->private_data;
 	u32 status, qc_active;
@@ -1358,7 +1361,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
-	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *port_mmio = ahci_port_base(ap);
 
 	if (qc->tf.protocol == ATA_PROT_NCQ)
 		writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
@@ -1370,8 +1373,7 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
 
 static void ahci_freeze(struct ata_port *ap)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	void __iomem *port_mmio = ahci_port_base(ap);
 
 	/* turn IRQ off */
 	writel(0, port_mmio + PORT_IRQ_MASK);
@@ -1380,7 +1382,7 @@ static void ahci_freeze(struct ata_port *ap)
 static void ahci_thaw(struct ata_port *ap)
 {
 	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 
 	/* clear IRQ */
@@ -1394,13 +1396,10 @@ static void ahci_thaw(struct ata_port *ap)
 
 static void ahci_error_handler(struct ata_port *ap)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
-
 	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
 		/* restart engine */
-		ahci_stop_engine(port_mmio);
-		ahci_start_engine(port_mmio);
+		ahci_stop_engine(ap);
+		ahci_start_engine(ap);
 	}
 
 	/* perform recovery */
@@ -1410,13 +1409,10 @@ static void ahci_error_handler(struct ata_port *ap)
 
 static void ahci_vt8251_error_handler(struct ata_port *ap)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
-
 	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
 		/* restart engine */
-		ahci_stop_engine(port_mmio);
-		ahci_start_engine(port_mmio);
+		ahci_stop_engine(ap);
+		ahci_start_engine(ap);
 	}
 
 	/* perform recovery */
@@ -1427,33 +1423,26 @@ static void ahci_vt8251_error_handler(struct ata_port *ap)
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 
 	if (qc->flags & ATA_QCFLAG_FAILED) {
 		/* make DMA engine forget about the failed command */
-		ahci_stop_engine(port_mmio);
-		ahci_start_engine(port_mmio);
+		ahci_stop_engine(ap);
+		ahci_start_engine(ap);
 	}
 }
 
 #ifdef CONFIG_PM
 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 {
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	const char *emsg = NULL;
 	int rc;
 
-	rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
+	rc = ahci_deinit_port(ap, &emsg);
 	if (rc == 0)
-		ahci_power_down(port_mmio, hpriv->cap);
+		ahci_power_down(ap);
 	else {
 		ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
-		ahci_init_port(port_mmio, hpriv->cap,
-			       pp->cmd_slot_dma, pp->rx_fis_dma);
+		ahci_init_port(ap);
 	}
 
 	return rc;
@@ -1461,13 +1450,8 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 
 static int ahci_port_resume(struct ata_port *ap)
 {
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
-
-	ahci_power_up(port_mmio, hpriv->cap);
-	ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma);
+	ahci_power_up(ap);
+	ahci_init_port(ap);
 
 	return 0;
 }
@@ -1495,8 +1479,6 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 static int ahci_pci_device_resume(struct pci_dev *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 	int rc;
 
 	rc = ata_pci_device_do_resume(pdev);
@@ -1504,12 +1486,11 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
 		return rc;
 
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_reset_controller(mmio, pdev, hpriv);
+		rc = ahci_reset_controller(host);
 		if (rc)
 			return rc;
 
-		ahci_init_controller(mmio, pdev, host->n_ports,
-				     host->ports[0]->flags, hpriv);
+		ahci_init_controller(host);
 	}
 
 	ata_host_resume(host);
@@ -1521,10 +1502,7 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
 static int ahci_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host->dev;
-	struct ahci_host_priv *hpriv = ap->host->private_data;
 	struct ahci_port_priv *pp;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	void *mem;
 	dma_addr_t mem_dma;
 	int rc;
@@ -1572,60 +1550,29 @@ static int ahci_port_start(struct ata_port *ap)
 	ap->private_data = pp;
 
 	/* power up port */
-	ahci_power_up(port_mmio, hpriv->cap);
+	ahci_power_up(ap);
 
 	/* initialize port */
-	ahci_init_port(port_mmio, hpriv->cap, pp->cmd_slot_dma, pp->rx_fis_dma);
+	ahci_init_port(ap);
 
 	return 0;
 }
 
 static void ahci_port_stop(struct ata_port *ap)
 {
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
-	void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
 	const char *emsg = NULL;
 	int rc;
 
 	/* de-initialize port */
-	rc = ahci_deinit_port(port_mmio, hpriv->cap, &emsg);
+	rc = ahci_deinit_port(ap, &emsg);
 	if (rc)
 		ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
 }
 
-static void ahci_setup_port(struct ata_ioports *port, void __iomem *base,
-			    unsigned int port_idx)
+static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 {
-	VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx);
-	base = ahci_port_base(base, port_idx);
-	VPRINTK("base now==0x%lx\n", base);
-
-	port->cmd_addr		= base;
-	port->scr_addr		= base + PORT_SCR;
-
-	VPRINTK("EXIT\n");
-}
-
-static int ahci_host_init(struct ata_probe_ent *probe_ent)
-{
-	struct ahci_host_priv *hpriv = probe_ent->private_data;
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
-	void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
-	unsigned int i, using_dac;
 	int rc;
 
-	rc = ahci_reset_controller(mmio, pdev, hpriv);
-	if (rc)
-		return rc;
-
-	probe_ent->n_ports = fls(hpriv->port_map);
-	probe_ent->dummy_port_mask = ~hpriv->port_map;
-
-	VPRINTK("cap 0x%x  port_map 0x%x  n_ports %d\n",
-		hpriv->cap, hpriv->port_map, probe_ent->n_ports);
-
-	using_dac = hpriv->cap & HOST_CAP_64;
 	if (using_dac &&
 	    !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
@@ -1651,23 +1598,14 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 			return rc;
 		}
 	}
-
-	for (i = 0; i < probe_ent->n_ports; i++)
-		ahci_setup_port(&probe_ent->port[i], mmio, i);
-
-	ahci_init_controller(mmio, pdev, probe_ent->n_ports,
-			     probe_ent->port_flags, hpriv);
-
-	pci_set_master(pdev);
-
 	return 0;
 }
 
-static void ahci_print_info(struct ata_probe_ent *probe_ent)
+static void ahci_print_info(struct ata_host *host)
 {
-	struct ahci_host_priv *hpriv = probe_ent->private_data;
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
-	void __iomem *mmio = probe_ent->iomap[AHCI_PCI_BAR];
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
 	u32 vers, cap, impl, speed;
 	const char *speed_s;
 	u16 cc;
@@ -1737,11 +1675,12 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent)
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	unsigned int board_idx = (unsigned int) ent->driver_data;
+	struct ata_port_info pi = ahci_port_info[ent->driver_data];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
 	struct ahci_host_priv *hpriv;
-	int rc;
+	struct ata_host *host;
+	int i, rc;
 
 	VPRINTK("ENTER\n");
 
@@ -1750,6 +1689,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -1763,46 +1703,49 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (pci_enable_msi(pdev))
 		pci_intx(pdev, 1);
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
 
-	probe_ent->sht		= ahci_port_info[board_idx].sht;
-	probe_ent->port_flags	= ahci_port_info[board_idx].flags;
-	probe_ent->pio_mask	= ahci_port_info[board_idx].pio_mask;
-	probe_ent->udma_mask	= ahci_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= ahci_port_info[board_idx].port_ops;
+	/* save initial config */
+	ahci_save_initial_config(pdev, &pi, hpriv);
 
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-	probe_ent->private_data = hpriv;
+	/* prepare host */
+	if (!(pi.flags & AHCI_FLAG_NO_NCQ) && (hpriv->cap & HOST_CAP_NCQ))
+		pi.flags |= ATA_FLAG_NCQ;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, fls(hpriv->port_map));
+	if (!host)
+		return -ENOMEM;
+	host->iomap = pcim_iomap_table(pdev);
+	host->private_data = hpriv;
+
+	for (i = 0; i < host->n_ports; i++) {
+		if (hpriv->port_map & (1 << i)) {
+			struct ata_port *ap = host->ports[i];
+			void __iomem *port_mmio = ahci_port_base(ap);
+
+			ap->ioaddr.cmd_addr = port_mmio;
+			ap->ioaddr.scr_addr = port_mmio + PORT_SCR;
+		} else
+			host->ports[i]->ops = &ata_dummy_port_ops;
+	}
 
 	/* initialize adapter */
-	ahci_save_initial_config(probe_ent);
-
-	rc = ahci_host_init(probe_ent);
+	rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
 	if (rc)
 		return rc;
 
-	if (!(probe_ent->port_flags & AHCI_FLAG_NO_NCQ) &&
-	    (hpriv->cap & HOST_CAP_NCQ))
-		probe_ent->port_flags |= ATA_FLAG_NCQ;
+	rc = ahci_reset_controller(host);
+	if (rc)
+		return rc;
 
-	ahci_print_info(probe_ent);
+	ahci_init_controller(host);
+	ahci_print_info(host);
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
+				 &ahci_sht);
 }
 
 static int __init ahci_init(void)
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index ca4092aaae5b..f099a1d83a00 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -559,7 +559,6 @@ static struct ata_port_operations inic_port_ops = {
 	.bmdma_stop		= inic_bmdma_stop,
 	.bmdma_status		= inic_bmdma_status,
 
-	.irq_handler		= inic_interrupt,
 	.irq_clear		= inic_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -580,7 +579,6 @@ static struct ata_port_operations inic_port_ops = {
 };
 
 static struct ata_port_info inic_port_info = {
-	.sht			= &inic_sht,
 	/* For some reason, ATA_PROT_ATAPI is broken on this
 	 * controller, and no, PIO_POLLING does't fix it.  It somehow
 	 * manages to report the wrong ireason and ignoring ireason
@@ -661,8 +659,8 @@ static int inic_pci_device_resume(struct pci_dev *pdev)
 static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_port_info *pinfo = &inic_port_info;
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[] = { &inic_port_info, NULL };
+	struct ata_host *host;
 	struct inic_host_priv *hpriv;
 	void __iomem * const *iomap;
 	int i, rc;
@@ -670,6 +668,15 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* alloc host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS);
+	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!host || !hpriv)
+		return -ENOMEM;
+
+	host->private_data = hpriv;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -677,7 +684,22 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
 	if (rc)
 		return rc;
-	iomap = pcim_iomap_table(pdev);
+	host->iomap = iomap = pcim_iomap_table(pdev);
+
+	for (i = 0; i < NR_PORTS; i++) {
+		struct ata_ioports *port = &host->ports[i]->ioaddr;
+		void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE;
+
+		port->cmd_addr = iomap[2 * i];
+		port->altstatus_addr =
+		port->ctl_addr = (void __iomem *)
+			((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
+		port->scr_addr = port_base + PORT_SCR;
+
+		ata_std_ports(port);
+	}
+
+	hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
 
 	/* Set dma_mask.  This devices doesn't support 64bit addressing. */
 	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
@@ -694,43 +716,6 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return rc;
 	}
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
-	if (!probe_ent || !hpriv)
-		return -ENOMEM;
-
-	probe_ent->dev = &pdev->dev;
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht			= pinfo->sht;
-	probe_ent->port_flags		= pinfo->flags;
-	probe_ent->pio_mask		= pinfo->pio_mask;
-	probe_ent->mwdma_mask		= pinfo->mwdma_mask;
-	probe_ent->udma_mask		= pinfo->udma_mask;
-	probe_ent->port_ops		= pinfo->port_ops;
-	probe_ent->n_ports		= NR_PORTS;
-
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-
-	probe_ent->iomap = iomap;
-
-	for (i = 0; i < NR_PORTS; i++) {
-		struct ata_ioports *port = &probe_ent->port[i];
-		void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE;
-
-		port->cmd_addr = iomap[2 * i];
-		port->altstatus_addr =
-		port->ctl_addr = (void __iomem *)
-			((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
-		port->scr_addr = port_base + PORT_SCR;
-
-		ata_std_ports(port);
-	}
-
-	probe_ent->private_data = hpriv;
-	hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
-
 	rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl);
 	if (rc) {
 		dev_printk(KERN_ERR, &pdev->dev,
@@ -739,13 +724,8 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-
-	return 0;
+	return ata_host_activate(host, pdev->irq, inic_interrupt, IRQF_SHARED,
+				 &inic_sht);
 }
 
 static const struct pci_device_id inic_pci_tbl[] = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 10cad5d9a76d..cb9b9ac12b4c 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -347,7 +347,6 @@ static void mv_port_stop(struct ata_port *ap);
 static void mv_qc_prep(struct ata_queued_cmd *qc);
 static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static irqreturn_t mv_interrupt(int irq, void *dev_instance);
 static void mv_eng_timeout(struct ata_port *ap);
 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 
@@ -410,7 +409,6 @@ static const struct ata_port_operations mv5_ops = {
 
 	.eng_timeout		= mv_eng_timeout,
 
-	.irq_handler		= mv_interrupt,
 	.irq_clear		= mv_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -440,7 +438,6 @@ static const struct ata_port_operations mv6_ops = {
 
 	.eng_timeout		= mv_eng_timeout,
 
-	.irq_handler		= mv_interrupt,
 	.irq_clear		= mv_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -470,7 +467,6 @@ static const struct ata_port_operations mv_iie_ops = {
 
 	.eng_timeout		= mv_eng_timeout,
 
-	.irq_handler		= mv_interrupt,
 	.irq_clear		= mv_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -484,35 +480,30 @@ static const struct ata_port_operations mv_iie_ops = {
 
 static const struct ata_port_info mv_port_info[] = {
 	{  /* chip_504x */
-		.sht		= &mv_sht,
 		.flags		= MV_COMMON_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_508x */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_5080 */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_604x */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_608x */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
 				   MV_FLAG_DUAL_HC),
 		.pio_mask	= 0x1f,	/* pio0-4 */
@@ -520,14 +511,12 @@ static const struct ata_port_info mv_port_info[] = {
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_6042 */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_7042 */
-		.sht		= &mv_sht,
 		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
@@ -2099,9 +2088,10 @@ static void mv_port_init(struct ata_ioports *port,  void __iomem *port_mmio)
 		readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
 }
 
-static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv,
-		      unsigned int board_idx)
+static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 {
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	struct mv_host_priv *hpriv = host->private_data;
 	u8 rev_id;
 	u32 hp_flags = hpriv->hp_flags;
 
@@ -2199,8 +2189,8 @@ static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv,
 
 /**
  *      mv_init_host - Perform some early initialization of the host.
- *	@pdev: host PCI device
- *      @probe_ent: early data struct representing the host
+ *	@host: ATA host to initialize
+ *      @board_idx: controller index
  *
  *      If possible, do an early global reset of the host.  Then do
  *      our port init and clear/unmask all/relevant host interrupts.
@@ -2208,24 +2198,23 @@ static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv,
  *      LOCKING:
  *      Inherited from caller.
  */
-static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
-			unsigned int board_idx)
+static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 {
 	int rc = 0, n_hc, port, hc;
-	void __iomem *mmio = probe_ent->iomap[MV_PRIMARY_BAR];
-	struct mv_host_priv *hpriv = probe_ent->private_data;
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
+	struct mv_host_priv *hpriv = host->private_data;
 
 	/* global interrupt mask */
 	writel(0, mmio + HC_MAIN_IRQ_MASK_OFS);
 
-	rc = mv_chip_id(pdev, hpriv, board_idx);
+	rc = mv_chip_id(host, board_idx);
 	if (rc)
 		goto done;
 
-	n_hc = mv_get_hc_count(probe_ent->port_flags);
-	probe_ent->n_ports = MV_PORTS_PER_HC * n_hc;
+	n_hc = mv_get_hc_count(host->ports[0]->flags);
 
-	for (port = 0; port < probe_ent->n_ports; port++)
+	for (port = 0; port < host->n_ports; port++)
 		hpriv->ops->read_preamp(hpriv, port, mmio);
 
 	rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
@@ -2236,7 +2225,7 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
 	hpriv->ops->reset_bus(pdev, mmio);
 	hpriv->ops->enable_leds(hpriv, mmio);
 
-	for (port = 0; port < probe_ent->n_ports; port++) {
+	for (port = 0; port < host->n_ports; port++) {
 		if (IS_60XX(hpriv)) {
 			void __iomem *port_mmio = mv_port_base(mmio, port);
 
@@ -2249,9 +2238,9 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
 		hpriv->ops->phy_errata(hpriv, mmio, port);
 	}
 
-	for (port = 0; port < probe_ent->n_ports; port++) {
+	for (port = 0; port < host->n_ports; port++) {
 		void __iomem *port_mmio = mv_port_base(mmio, port);
-		mv_port_init(&probe_ent->port[port], port_mmio);
+		mv_port_init(&host->ports[port]->ioaddr, port_mmio);
 	}
 
 	for (hc = 0; hc < n_hc; hc++) {
@@ -2290,17 +2279,17 @@ done:
 
 /**
  *      mv_print_info - Dump key info to kernel log for perusal.
- *      @probe_ent: early data struct representing the host
+ *      @host: ATA host to print info about
  *
  *      FIXME: complete this.
  *
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_print_info(struct ata_probe_ent *probe_ent)
+static void mv_print_info(struct ata_host *host)
 {
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
-	struct mv_host_priv *hpriv = probe_ent->private_data;
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	struct mv_host_priv *hpriv = host->private_data;
 	u8 rev_id, scc;
 	const char *scc_s;
 
@@ -2319,7 +2308,7 @@ static void mv_print_info(struct ata_probe_ent *probe_ent)
 
 	dev_printk(KERN_INFO, &pdev->dev,
 	       "%u slots %u ports %s mode IRQ via %s\n",
-	       (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
+	       (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
 	       scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
 }
 
@@ -2334,54 +2323,42 @@ static void mv_print_info(struct ata_probe_ent *probe_ent)
 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version = 0;
-	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
-	struct mv_host_priv *hpriv;
 	unsigned int board_idx = (unsigned int)ent->driver_data;
-	int rc;
+	const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
+	struct ata_host *host;
+	struct mv_host_priv *hpriv;
+	int n_ports, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	n_ports = mv_get_hc_count(ppi[0]->flags) * MV_PORTS_PER_HC;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!host || !hpriv)
+		return -ENOMEM;
+	host->private_data = hpriv;
+
+	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
-	pci_set_master(pdev);
 
 	rc = pcim_iomap_regions(pdev, 1 << MV_PRIMARY_BAR, DRV_NAME);
 	if (rc == -EBUSY)
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
 	rc = pci_go_64(pdev);
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
-	if (!hpriv)
-		return -ENOMEM;
-
-	probe_ent->sht = mv_port_info[board_idx].sht;
-	probe_ent->port_flags = mv_port_info[board_idx].flags;
-	probe_ent->pio_mask = mv_port_info[board_idx].pio_mask;
-	probe_ent->udma_mask = mv_port_info[board_idx].udma_mask;
-	probe_ent->port_ops = mv_port_info[board_idx].port_ops;
-
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-	probe_ent->private_data = hpriv;
-
 	/* initialize adapter */
-	rc = mv_init_host(pdev, probe_ent, board_idx);
+	rc = mv_init_host(host, board_idx);
 	if (rc)
 		return rc;
 
@@ -2390,13 +2367,11 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		pci_intx(pdev, 1);
 
 	mv_dump_pci_cfg(pdev, 0x68);
-	mv_print_info(probe_ent);
+	mv_print_info(host);
 
-	if (ata_device_add(probe_ent) == 0)
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
+				 &mv_sht);
 }
 
 static int __init mv_init(void)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 8786b45f291b..f5a05de0093d 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -114,7 +114,6 @@ struct qs_port_priv {
 static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static irqreturn_t qs_intr (int irq, void *dev_instance);
 static int qs_port_start(struct ata_port *ap);
 static void qs_host_stop(struct ata_host *host);
 static void qs_phy_reset(struct ata_port *ap);
@@ -158,7 +157,6 @@ static const struct ata_port_operations qs_ata_ops = {
 	.qc_issue		= qs_qc_issue,
 	.data_xfer		= ata_data_xfer,
 	.eng_timeout		= qs_eng_timeout,
-	.irq_handler		= qs_intr,
 	.irq_clear		= qs_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -173,7 +171,6 @@ static const struct ata_port_operations qs_ata_ops = {
 static const struct ata_port_info qs_port_info[] = {
 	/* board_2068_idx */
 	{
-		.sht		= &qs_ata_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_SATA_RESET |
 				  //FIXME ATA_FLAG_SRST |
@@ -530,16 +527,16 @@ static void qs_host_stop(struct ata_host *host)
 	writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
 }
 
-static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
+static void qs_host_init(struct ata_host *host, unsigned int chip_id)
 {
-	void __iomem *mmio_base = pe->iomap[QS_MMIO_BAR];
+	void __iomem *mmio_base = host->iomap[QS_MMIO_BAR];
 	unsigned int port_no;
 
 	writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
 	writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
 
 	/* reset each channel in turn */
-	for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+	for (port_no = 0; port_no < host->n_ports; ++port_no) {
 		u8 __iomem *chan = mmio_base + (port_no * 0x4000);
 		writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1);
 		writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
@@ -547,7 +544,7 @@ static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
 	}
 	writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */
 
-	for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+	for (port_no = 0; port_no < host->n_ports; ++port_no) {
 		u8 __iomem *chan = mmio_base + (port_no * 0x4000);
 		/* set FIFO depths to same settings as Windows driver */
 		writew(32, chan + QS_CFC_HUFT);
@@ -607,14 +604,20 @@ static int qs_ata_init_one(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
-	void __iomem * const *iomap;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
+	const struct ata_port_info *ppi[] = { &qs_port_info[board_idx], NULL };
+	struct ata_host *host;
 	int rc, port_no;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* alloc host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, QS_PORTS);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -625,47 +628,24 @@ static int qs_ata_init_one(struct pci_dev *pdev,
 	rc = pcim_iomap_regions(pdev, 1 << QS_MMIO_BAR, DRV_NAME);
 	if (rc)
 		return rc;
-	iomap = pcim_iomap_table(pdev);
+	host->iomap = pcim_iomap_table(pdev);
 
-	rc = qs_set_dma_masks(pdev, iomap[QS_MMIO_BAR]);
+	rc = qs_set_dma_masks(pdev, host->iomap[QS_MMIO_BAR]);
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht		= qs_port_info[board_idx].sht;
-	probe_ent->port_flags	= qs_port_info[board_idx].flags;
-	probe_ent->pio_mask	= qs_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= qs_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= qs_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= qs_port_info[board_idx].port_ops;
-
-	probe_ent->irq		= pdev->irq;
-	probe_ent->irq_flags	= IRQF_SHARED;
-	probe_ent->iomap	= iomap;
-	probe_ent->n_ports	= QS_PORTS;
-
-	for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
+	for (port_no = 0; port_no < host->n_ports; ++port_no) {
 		void __iomem *chan =
-			probe_ent->iomap[QS_MMIO_BAR] + (port_no * 0x4000);
-		qs_ata_setup_port(&probe_ent->port[port_no], chan);
+			host->iomap[QS_MMIO_BAR] + (port_no * 0x4000);
+		qs_ata_setup_port(&host->ports[port_no]->ioaddr, chan);
 	}
 
-	pci_set_master(pdev);
-
 	/* initialize adapter */
-	qs_host_init(board_idx, probe_ent);
+	qs_host_init(host, board_idx);
 
-	if (ata_device_add(probe_ent) != QS_PORTS)
-		return -EIO;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, qs_intr, IRQF_SHARED,
+				 &qs_ata_sht);
 }
 
 static int __init qs_ata_init(void)
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 466b05b67115..0a1e417f309c 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -118,7 +118,6 @@ static void sil_dev_config(struct ata_device *dev);
 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed);
-static irqreturn_t sil_interrupt(int irq, void *dev_instance);
 static void sil_freeze(struct ata_port *ap);
 static void sil_thaw(struct ata_port *ap);
 
@@ -209,7 +208,6 @@ static const struct ata_port_operations sil_ops = {
 	.thaw			= sil_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= sil_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -221,7 +219,6 @@ static const struct ata_port_operations sil_ops = {
 static const struct ata_port_info sil_port_info[] = {
 	/* sil_3112 */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -230,7 +227,6 @@ static const struct ata_port_info sil_port_info[] = {
 	},
 	/* sil_3112_no_sata_irq */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
 				  SIL_FLAG_NO_SATA_IRQ,
 		.pio_mask	= 0x1f,			/* pio0-4 */
@@ -240,7 +236,6 @@ static const struct ata_port_info sil_port_info[] = {
 	},
 	/* sil_3512 */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -249,7 +244,6 @@ static const struct ata_port_info sil_port_info[] = {
 	},
 	/* sil_3114 */
 	{
-		.sht		= &sil_sht,
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -598,10 +592,10 @@ static void sil_dev_config(struct ata_device *dev)
 	}
 }
 
-static void sil_init_controller(struct pci_dev *pdev,
-				int n_ports, unsigned long port_flags,
-				void __iomem *mmio_base)
+static void sil_init_controller(struct ata_host *host)
 {
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR];
 	u8 cls;
 	u32 tmp;
 	int i;
@@ -611,7 +605,7 @@ static void sil_init_controller(struct pci_dev *pdev,
 	if (cls) {
 		cls >>= 3;
 		cls++;  /* cls = (line_size/8)+1 */
-		for (i = 0; i < n_ports; i++)
+		for (i = 0; i < host->n_ports; i++)
 			writew(cls << 8 | cls,
 			       mmio_base + sil_port[i].fifo_cfg);
 	} else
@@ -619,10 +613,10 @@ static void sil_init_controller(struct pci_dev *pdev,
 			   "cache line size not set.  Driver may not function\n");
 
 	/* Apply R_ERR on DMA activate FIS errata workaround */
-	if (port_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+	if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) {
 		int cnt;
 
-		for (i = 0, cnt = 0; i < n_ports; i++) {
+		for (i = 0, cnt = 0; i < host->n_ports; i++) {
 			tmp = readl(mmio_base + sil_port[i].sfis_cfg);
 			if ((tmp & 0x3) != 0x01)
 				continue;
@@ -635,7 +629,7 @@ static void sil_init_controller(struct pci_dev *pdev,
 		}
 	}
 
-	if (n_ports == 4) {
+	if (host->n_ports == 4) {
 		/* flip the magic "make 4 ports work" bit */
 		tmp = readl(mmio_base + sil_port[2].bmdma);
 		if ((tmp & SIL_INTR_STEERING) == 0)
@@ -647,15 +641,26 @@ static void sil_init_controller(struct pci_dev *pdev,
 static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
+	int board_id = ent->driver_data;
+	const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+	struct ata_host *host;
 	void __iomem *mmio_base;
-	int rc;
+	int n_ports, rc;
 	unsigned int i;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	n_ports = 2;
+	if (board_id == sil_3114)
+		n_ports = 4;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -665,6 +670,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
@@ -673,45 +679,25 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
+	mmio_base = host->iomap[SIL_MMIO_BAR];
 
-	INIT_LIST_HEAD(&probe_ent->node);
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops;
-	probe_ent->sht = sil_port_info[ent->driver_data].sht;
-	probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2;
-	probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask;
-	probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask;
-	probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask;
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->port_flags = sil_port_info[ent->driver_data].flags;
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
 
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	mmio_base = probe_ent->iomap[SIL_MMIO_BAR];
-
-	for (i = 0; i < probe_ent->n_ports; i++) {
-		probe_ent->port[i].cmd_addr = mmio_base + sil_port[i].tf;
-		probe_ent->port[i].altstatus_addr =
-		probe_ent->port[i].ctl_addr = mmio_base + sil_port[i].ctl;
-		probe_ent->port[i].bmdma_addr = mmio_base + sil_port[i].bmdma;
-		probe_ent->port[i].scr_addr = mmio_base + sil_port[i].scr;
-		ata_std_ports(&probe_ent->port[i]);
+		ioaddr->cmd_addr = mmio_base + sil_port[i].tf;
+		ioaddr->altstatus_addr =
+		ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
+		ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
+		ioaddr->scr_addr = mmio_base + sil_port[i].scr;
+		ata_std_ports(ioaddr);
 	}
 
-	sil_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags,
-			    mmio_base);
+	/* initialize and activate */
+	sil_init_controller(host);
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED,
+				 &sil_sht);
 }
 
 #ifdef CONFIG_PM
@@ -724,8 +710,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev)
 	if (rc)
 		return rc;
 
-	sil_init_controller(pdev, host->n_ports, host->ports[0]->flags,
-			    host->iomap[SIL_MMIO_BAR]);
+	sil_init_controller(host);
 	ata_host_resume(host);
 
 	return 0;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 4f522ec04049..e6223ba667da 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -331,7 +331,6 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
 static void sil24_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
 static void sil24_irq_clear(struct ata_port *ap);
-static irqreturn_t sil24_interrupt(int irq, void *dev_instance);
 static void sil24_freeze(struct ata_port *ap);
 static void sil24_thaw(struct ata_port *ap);
 static void sil24_error_handler(struct ata_port *ap);
@@ -401,7 +400,6 @@ static const struct ata_port_operations sil24_ops = {
 	.qc_prep		= sil24_qc_prep,
 	.qc_issue		= sil24_qc_issue,
 
-	.irq_handler		= sil24_interrupt,
 	.irq_clear		= sil24_irq_clear,
 	.irq_on			= ata_dummy_irq_on,
 	.irq_ack		= ata_dummy_irq_ack,
@@ -424,10 +422,9 @@ static const struct ata_port_operations sil24_ops = {
 #define SIL24_NPORTS2FLAG(nports)	((((unsigned)(nports) - 1) & 0x3) << 30)
 #define SIL24_FLAG2NPORTS(flag)		((((flag) >> 30) & 0x3) + 1)
 
-static struct ata_port_info sil24_port_info[] = {
+static const struct ata_port_info sil24_port_info[] = {
 	/* sil_3124 */
 	{
-		.sht		= &sil24_sht,
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
 				  SIL24_FLAG_PCIX_IRQ_WOC,
 		.pio_mask	= 0x1f,			/* pio0-4 */
@@ -437,7 +434,6 @@ static struct ata_port_info sil24_port_info[] = {
 	},
 	/* sil_3132 */
 	{
-		.sht		= &sil24_sht,
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -446,7 +442,6 @@ static struct ata_port_info sil24_port_info[] = {
 	},
 	/* sil_3131/sil_3531 */
 	{
-		.sht		= &sil24_sht,
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -961,11 +956,10 @@ static int sil24_port_start(struct ata_port *ap)
 	return 0;
 }
 
-static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
-				  unsigned long port_flags,
-				  void __iomem *host_base,
-				  void __iomem *port_base)
+static void sil24_init_controller(struct ata_host *host)
 {
+	void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
+	void __iomem *port_base = host->iomap[SIL24_PORT_BAR];
 	u32 tmp;
 	int i;
 
@@ -976,7 +970,7 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
 	writel(0, host_base + HOST_CTRL);
 
 	/* init ports */
-	for (i = 0; i < n_ports; i++) {
+	for (i = 0; i < host->n_ports; i++) {
 		void __iomem *port = port_base + i * PORT_REGS_SIZE;
 
 		/* Initial PHY setting */
@@ -990,12 +984,12 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
 						PORT_CS_PORT_RST,
 						PORT_CS_PORT_RST, 10, 100);
 			if (tmp & PORT_CS_PORT_RST)
-				dev_printk(KERN_ERR, &pdev->dev,
+				dev_printk(KERN_ERR, host->dev,
 				           "failed to clear port RST\n");
 		}
 
 		/* Configure IRQ WoC */
-		if (port_flags & SIL24_FLAG_PCIX_IRQ_WOC)
+		if (host->ports[0]->flags & SIL24_FLAG_PCIX_IRQ_WOC)
 			writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
 		else
 			writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
@@ -1023,18 +1017,17 @@ static void sil24_init_controller(struct pci_dev *pdev, int n_ports,
 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version = 0;
-	struct device *dev = &pdev->dev;
-	unsigned int board_id = (unsigned int)ent->driver_data;
-	struct ata_port_info *pinfo = &sil24_port_info[board_id];
-	struct ata_probe_ent *probe_ent;
-	void __iomem *host_base;
-	void __iomem *port_base;
+	struct ata_port_info pi = sil24_port_info[ent->driver_data];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+	void __iomem * const *iomap;
+	struct ata_host *host;
 	int i, rc;
 	u32 tmp;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -1044,33 +1037,36 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 				DRV_NAME);
 	if (rc)
 		return rc;
+	iomap = pcim_iomap_table(pdev);
 
-	/* allocate & init probe_ent */
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (!probe_ent)
+	/* apply workaround for completion IRQ loss on PCI-X errata */
+	if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
+		tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
+		if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
+			dev_printk(KERN_INFO, &pdev->dev,
+				   "Applying completion IRQ loss on PCI-X "
+				   "errata fix\n");
+		else
+			pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
+	}
+
+	/* allocate and fill host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi,
+				    SIL24_FLAG2NPORTS(ppi[0]->flags));
+	if (!host)
 		return -ENOMEM;
+	host->iomap = iomap;
 
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
+	for (i = 0; i < host->n_ports; i++) {
+		void __iomem *port = iomap[SIL24_PORT_BAR] + i * PORT_REGS_SIZE;
 
-	probe_ent->sht		= pinfo->sht;
-	probe_ent->port_flags	= pinfo->flags;
-	probe_ent->pio_mask	= pinfo->pio_mask;
-	probe_ent->mwdma_mask	= pinfo->mwdma_mask;
-	probe_ent->udma_mask	= pinfo->udma_mask;
-	probe_ent->port_ops	= pinfo->port_ops;
-	probe_ent->n_ports	= SIL24_FLAG2NPORTS(pinfo->flags);
+		host->ports[i]->ioaddr.cmd_addr = port;
+		host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL;
 
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
+		ata_std_ports(&host->ports[i]->ioaddr);
+	}
 
-	host_base = probe_ent->iomap[SIL24_HOST_BAR];
-	port_base = probe_ent->iomap[SIL24_PORT_BAR];
-
-	/*
-	 * Configure the device
-	 */
+	/* configure and activate the device */
 	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 		if (rc) {
@@ -1096,36 +1092,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	/* Apply workaround for completion IRQ loss on PCI-X errata */
-	if (probe_ent->port_flags & SIL24_FLAG_PCIX_IRQ_WOC) {
-		tmp = readl(host_base + HOST_CTRL);
-		if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
-			dev_printk(KERN_INFO, &pdev->dev,
-				   "Applying completion IRQ loss on PCI-X "
-				   "errata fix\n");
-		else
-			probe_ent->port_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
-	}
-
-	for (i = 0; i < probe_ent->n_ports; i++) {
-		void __iomem *port = port_base + i * PORT_REGS_SIZE;
-
-		probe_ent->port[i].cmd_addr = port;
-		probe_ent->port[i].scr_addr = port + PORT_SCONTROL;
-
-		ata_std_ports(&probe_ent->port[i]);
-	}
-
-	sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags,
-			      host_base, port_base);
+	sil24_init_controller(host);
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
+				 &sil24_sht);
 }
 
 #ifdef CONFIG_PM
@@ -1133,7 +1104,6 @@ static int sil24_pci_device_resume(struct pci_dev *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
-	void __iomem *port_base = host->iomap[SIL24_PORT_BAR];
 	int rc;
 
 	rc = ata_pci_device_do_resume(pdev);
@@ -1143,8 +1113,7 @@ static int sil24_pci_device_resume(struct pci_dev *pdev)
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
 		writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
 
-	sil24_init_controller(pdev, host->n_ports, host->ports[0]->flags,
-			      host_base, port_base);
+	sil24_init_controller(host);
 
 	ata_host_resume(host);
 
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index b121195cc598..cc07aac10e8c 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -56,7 +56,9 @@
 #define DRV_VERSION	"2.1"
 
 enum {
-	K2_FLAG_NO_ATAPI_DMA		= (1 << 29),
+	/* ap->flags bits */
+	K2_FLAG_SATA_8_PORTS		= (1 << 24),
+	K2_FLAG_NO_ATAPI_DMA		= (1 << 25),
 
 	/* Taskfile registers offsets */
 	K2_SATA_TF_CMD_OFFSET		= 0x00,
@@ -90,17 +92,6 @@ enum {
 	board_svw8			= 1,
 };
 
-static const struct k2_board_info {
-	unsigned int		n_ports;
-	unsigned long		port_flags;
-} k2_board_info[] = {
-	/* board_svw4 */
-	{ 4, K2_FLAG_NO_ATAPI_DMA },
-
-	/* board_svw8 */
-	{ 8, K2_FLAG_NO_ATAPI_DMA },
-};
-
 static u8 k2_stat_check_status(struct ata_port *ap);
 
 
@@ -354,7 +345,6 @@ static const struct ata_port_operations k2_sata_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -363,6 +353,28 @@ static const struct ata_port_operations k2_sata_ops = {
 	.port_start		= ata_port_start,
 };
 
+static const struct ata_port_info k2_port_info[] = {
+	/* board_svw4 */
+	{
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA,
+		.pio_mask	= 0x1f,
+		.mwdma_mask	= 0x07,
+		.udma_mask	= 0x7f,
+		.port_ops	= &k2_sata_ops,
+	},
+	/* board_svw8 */
+	{
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA |
+				  K2_FLAG_SATA_8_PORTS,
+		.pio_mask	= 0x1f,
+		.mwdma_mask	= 0x07,
+		.udma_mask	= 0x7f,
+		.port_ops	= &k2_sata_ops,
+	},
+};
+
 static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
 {
 	port->cmd_addr		= base + K2_SATA_TF_CMD_OFFSET;
@@ -386,17 +398,24 @@ static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
 static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[] =
+		{ &k2_port_info[ent->driver_data], NULL };
+	struct ata_host *host;
 	void __iomem *mmio_base;
-	const struct k2_board_info *board_info =
-			&k2_board_info[ent->driver_data];
-	int rc;
-	int i;
+	int n_ports, i, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	n_ports = 4;
+	if (ppi[0]->flags & K2_FLAG_SATA_8_PORTS)
+		n_ports = 8;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
+	if (!host)
+		return -ENOMEM;
+
 	/*
 	 * If this driver happens to only be useful on Apple's K2, then
 	 * we should check that here as it has a normal Serverworks ID
@@ -404,6 +423,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
+
 	/*
 	 * Check if we have resources mapped at all (second function may
 	 * have been disabled by firmware)
@@ -417,6 +437,15 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
+	mmio_base = host->iomap[5];
+
+	/* different controllers have different number of ports - currently 4 or 8 */
+	/* All ports are on the same function. Multi-function device is no
+	 * longer available. This should not be seen in any system. */
+	for (i = 0; i < host->n_ports; i++)
+		k2_sata_setup_port(&host->ports[i]->ioaddr,
+				   mmio_base + i * K2_SATA_PORT_OFFSET);
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
@@ -425,38 +454,6 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht = &k2_sata_sht;
-	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO | board_info->port_flags;
-	probe_ent->port_ops = &k2_sata_ops;
-	probe_ent->n_ports = 4;
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	/* We don't care much about the PIO/UDMA masks, but the core won't like us
-	 * if we don't fill these
-	 */
-	probe_ent->pio_mask = 0x1f;
-	probe_ent->mwdma_mask = 0x7;
-	probe_ent->udma_mask = 0x7f;
-
-	mmio_base = probe_ent->iomap[5];
-
-	/* different controllers have different number of ports - currently 4 or 8 */
-	/* All ports are on the same function. Multi-function device is no
-	 * longer available. This should not be seen in any system. */
-	for (i = 0; i < board_info->n_ports; i++)
-		k2_sata_setup_port(&probe_ent->port[i],
-				   mmio_base + i * K2_SATA_PORT_OFFSET);
-
 	/* Clear a magic bit in SCR1 according to Darwin, those help
 	 * some funky seagate drives (though so far, those were already
 	 * set by the firmware on the machines I had access to)
@@ -469,12 +466,8 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
 
 	pci_set_master(pdev);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &k2_sata_sht);
 }
 
 /* 0x240 is device ID for Apple K2 device
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 1a081c3a8c06..3a4f44559d0a 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -151,24 +151,23 @@ struct pdc_host_priv {
 
 
 static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance);
 static void pdc_eng_timeout(struct ata_port *ap);
 static void pdc_20621_phy_reset (struct ata_port *ap);
 static int pdc_port_start(struct ata_port *ap);
 static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
-static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe);
-static int pdc20621_detect_dimm(struct ata_probe_ent *pe);
-static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe,
+static unsigned int pdc20621_dimm_init(struct ata_host *host);
+static int pdc20621_detect_dimm(struct ata_host *host);
+static unsigned int pdc20621_i2c_read(struct ata_host *host,
 				      u32 device, u32 subaddr, u32 *pdata);
-static int pdc20621_prog_dimm0(struct ata_probe_ent *pe);
-static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe);
+static int pdc20621_prog_dimm0(struct ata_host *host);
+static unsigned int pdc20621_prog_dimm_global(struct ata_host *host);
 #ifdef ATA_VERBOSE_DEBUG
-static void pdc20621_get_from_dimm(struct ata_probe_ent *pe,
+static void pdc20621_get_from_dimm(struct ata_host *host,
 				   void *psource, u32 offset, u32 size);
 #endif
-static void pdc20621_put_to_dimm(struct ata_probe_ent *pe,
+static void pdc20621_put_to_dimm(struct ata_host *host,
 				 void *psource, u32 offset, u32 size);
 static void pdc20621_irq_clear(struct ata_port *ap);
 static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
@@ -204,7 +203,6 @@ static const struct ata_port_operations pdc_20621_ops = {
 	.qc_issue		= pdc20621_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
 	.eng_timeout		= pdc_eng_timeout,
-	.irq_handler		= pdc20621_interrupt,
 	.irq_clear		= pdc20621_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -214,7 +212,6 @@ static const struct ata_port_operations pdc_20621_ops = {
 static const struct ata_port_info pdc_port_info[] = {
 	/* board_20621 */
 	{
-		.sht		= &pdc_sata_sht,
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
 				  ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING,
@@ -882,15 +879,15 @@ static void pdc_sata_setup_port(struct ata_ioports *port, void __iomem *base)
 
 
 #ifdef ATA_VERBOSE_DEBUG
-static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource,
+static void pdc20621_get_from_dimm(struct ata_host *host, void *psource,
 				   u32 offset, u32 size)
 {
 	u32 window_size;
 	u16 idx;
 	u8 page_mask;
 	long dist;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
-	void __iomem *dimm_mmio = pe->iomap[PDC_DIMM_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+	void __iomem *dimm_mmio = host->iomap[PDC_DIMM_BAR];
 
 	/* hard-code chip #0 */
 	mmio += PDC_CHIP0_OFS;
@@ -937,15 +934,15 @@ static void pdc20621_get_from_dimm(struct ata_probe_ent *pe, void *psource,
 #endif
 
 
-static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource,
+static void pdc20621_put_to_dimm(struct ata_host *host, void *psource,
 				 u32 offset, u32 size)
 {
 	u32 window_size;
 	u16 idx;
 	u8 page_mask;
 	long dist;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
-	void __iomem *dimm_mmio = pe->iomap[PDC_DIMM_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+	void __iomem *dimm_mmio = host->iomap[PDC_DIMM_BAR];
 
 	/* hard-code chip #0 */
 	mmio += PDC_CHIP0_OFS;
@@ -987,10 +984,10 @@ static void pdc20621_put_to_dimm(struct ata_probe_ent *pe, void *psource,
 }
 
 
-static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device,
+static unsigned int pdc20621_i2c_read(struct ata_host *host, u32 device,
 				      u32 subaddr, u32 *pdata)
 {
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 	u32 i2creg  = 0;
 	u32 status;
 	u32 count =0;
@@ -1023,17 +1020,17 @@ static unsigned int pdc20621_i2c_read(struct ata_probe_ent *pe, u32 device,
 }
 
 
-static int pdc20621_detect_dimm(struct ata_probe_ent *pe)
+static int pdc20621_detect_dimm(struct ata_host *host)
 {
 	u32 data=0 ;
-  	if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+	if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 			     PDC_DIMM_SPD_SYSTEM_FREQ, &data)) {
    		if (data == 100)
 			return 100;
   	} else
 		return 0;
 
-   	if (pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
+	if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
 		if(data <= 0x75)
 			return 133;
    	} else
@@ -1043,13 +1040,13 @@ static int pdc20621_detect_dimm(struct ata_probe_ent *pe)
 }
 
 
-static int pdc20621_prog_dimm0(struct ata_probe_ent *pe)
+static int pdc20621_prog_dimm0(struct ata_host *host)
 {
 	u32 spd0[50];
 	u32 data = 0;
    	int size, i;
    	u8 bdimmsize;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 	static const struct {
 		unsigned int reg;
 		unsigned int ofs;
@@ -1072,7 +1069,7 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe)
 	mmio += PDC_CHIP0_OFS;
 
 	for(i=0; i<ARRAY_SIZE(pdc_i2c_read_data); i++)
-		pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+		pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 				  pdc_i2c_read_data[i].reg,
 				  &spd0[pdc_i2c_read_data[i].ofs]);
 
@@ -1108,11 +1105,11 @@ static int pdc20621_prog_dimm0(struct ata_probe_ent *pe)
 }
 
 
-static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe)
+static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
 {
 	u32 data, spd0;
 	int error, i;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 
 	/* hard-code chip #0 */
    	mmio += PDC_CHIP0_OFS;
@@ -1129,7 +1126,7 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe)
 	readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
 
 	/* Turn on for ECC */
-	pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 			  PDC_DIMM_SPD_TYPE, &spd0);
 	if (spd0 == 0x02) {
 		data |= (0x01 << 16);
@@ -1156,7 +1153,7 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_probe_ent *pe)
 }
 
 
-static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
+static unsigned int pdc20621_dimm_init(struct ata_host *host)
 {
 	int speed, size, length;
 	u32 addr,spd0,pci_status;
@@ -1166,7 +1163,7 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
 	u32 ticks=0;
 	u32 clock=0;
 	u32 fparam=0;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 
 	/* hard-code chip #0 */
    	mmio += PDC_CHIP0_OFS;
@@ -1225,18 +1222,18 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
 	   Read SPD of DIMM by I2C interface,
 	   and program the DIMM Module Controller.
 	*/
- 	if (!(speed = pdc20621_detect_dimm(pe))) {
+	if (!(speed = pdc20621_detect_dimm(host))) {
 		printk(KERN_ERR "Detect Local DIMM Fail\n");
 		return 1;	/* DIMM error */
    	}
    	VPRINTK("Local DIMM Speed = %d\n", speed);
 
    	/* Programming DIMM0 Module Control Register (index_CID0:80h) */
-   	size = pdc20621_prog_dimm0(pe);
+	size = pdc20621_prog_dimm0(host);
    	VPRINTK("Local DIMM Size = %dMB\n",size);
 
    	/* Programming DIMM Module Global Control Register (index_CID0:88h) */
-   	if (pdc20621_prog_dimm_global(pe)) {
+	if (pdc20621_prog_dimm_global(host)) {
 		printk(KERN_ERR "Programming DIMM Module Global Control Register Fail\n");
 		return 1;
    	}
@@ -1249,20 +1246,20 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
   				'9','8','0','3','1','6','1','2',0,0};
 		u8 test_parttern2[40] = {0};
 
-		pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x10040, 40);
-		pdc20621_put_to_dimm(pe, (void *) test_parttern2, 0x40, 40);
+		pdc20621_put_to_dimm(host, (void *) test_parttern2, 0x10040, 40);
+		pdc20621_put_to_dimm(host, (void *) test_parttern2, 0x40, 40);
 
-		pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x10040, 40);
-		pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40);
+		pdc20621_put_to_dimm(host, (void *) test_parttern1, 0x10040, 40);
+		pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x40, 40);
 		printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
 		       test_parttern2[1], &(test_parttern2[2]));
-		pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x10040,
+		pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x10040,
 				       40);
 		printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
 		       test_parttern2[1], &(test_parttern2[2]));
 
-		pdc20621_put_to_dimm(pe, (void *) test_parttern1, 0x40, 40);
-		pdc20621_get_from_dimm(pe, (void *) test_parttern2, 0x40, 40);
+		pdc20621_put_to_dimm(host, (void *) test_parttern1, 0x40, 40);
+		pdc20621_get_from_dimm(host, (void *) test_parttern2, 0x40, 40);
 		printk(KERN_ERR "%x, %x, %s\n", test_parttern2[0],
 		       test_parttern2[1], &(test_parttern2[2]));
 	}
@@ -1270,14 +1267,14 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
 
 	/* ECC initiliazation. */
 
-	pdc20621_i2c_read(pe, PDC_DIMM0_SPD_DEV_ADDRESS,
+	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 			  PDC_DIMM_SPD_TYPE, &spd0);
 	if (spd0 == 0x02) {
 		VPRINTK("Start ECC initialization\n");
 		addr = 0;
 		length = size * 1024 * 1024;
 		while (addr < length) {
-			pdc20621_put_to_dimm(pe, (void *) &tmp, addr,
+			pdc20621_put_to_dimm(host, (void *) &tmp, addr,
 					     sizeof(u32));
 			addr += sizeof(u32);
 		}
@@ -1287,10 +1284,10 @@ static unsigned int pdc20621_dimm_init(struct ata_probe_ent *pe)
 }
 
 
-static void pdc_20621_init(struct ata_probe_ent *pe)
+static void pdc_20621_init(struct ata_host *host)
 {
 	u32 tmp;
-	void __iomem *mmio = pe->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
 
 	/* hard-code chip #0 */
 	mmio += PDC_CHIP0_OFS;
@@ -1321,15 +1318,25 @@ static void pdc_20621_init(struct ata_probe_ent *pe)
 static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[] =
+		{ &pdc_port_info[ent->driver_data], NULL };
+	struct ata_host *host;
 	void __iomem *base;
 	struct pdc_host_priv *hpriv;
-	unsigned int board_idx = (unsigned int) ent->driver_data;
 	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
+	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!host || !hpriv)
+		return -ENOMEM;
+
+	host->private_data = hpriv;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -1340,7 +1347,15 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
+	base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
+	pdc_sata_setup_port(&host->ports[0]->ioaddr, base + 0x200);
+	pdc_sata_setup_port(&host->ports[1]->ioaddr, base + 0x280);
+	pdc_sata_setup_port(&host->ports[2]->ioaddr, base + 0x300);
+	pdc_sata_setup_port(&host->ports[3]->ioaddr, base + 0x380);
+
+	/* configure and activate */
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
@@ -1348,50 +1363,13 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
+	if (pdc20621_dimm_init(host))
 		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
-	if (!hpriv)
-		return -ENOMEM;
-
-	probe_ent->sht		= pdc_port_info[board_idx].sht;
-	probe_ent->port_flags	= pdc_port_info[board_idx].flags;
-	probe_ent->pio_mask	= pdc_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= pdc_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= pdc_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= pdc_port_info[board_idx].port_ops;
-
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	probe_ent->private_data = hpriv;
-	base = probe_ent->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
-
-	probe_ent->n_ports = 4;
-	pdc_sata_setup_port(&probe_ent->port[0], base + 0x200);
-	pdc_sata_setup_port(&probe_ent->port[1], base + 0x280);
-	pdc_sata_setup_port(&probe_ent->port[2], base + 0x300);
-	pdc_sata_setup_port(&probe_ent->port[3], base + 0x380);
+	pdc_20621_init(host);
 
 	pci_set_master(pdev);
-
-	/* initialize adapter */
-	/* initialize local dimm */
-	if (pdc20621_dimm_init(probe_ent))
-		return -ENOMEM;
-	pdc_20621_init(probe_ent);
-
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, pdc20621_interrupt,
+				 IRQF_SHARED, &pdc_sata_sht);
 }
 
 
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 170bad1b415b..80126f835d32 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -333,7 +333,6 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.thaw			= vsc_thaw,
 	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= vsc_sata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -367,30 +366,50 @@ static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
 
 static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+	static const struct ata_port_info pi = {
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO,
+		.pio_mask	= 0x1f,
+		.mwdma_mask	= 0x07,
+		.udma_mask	= 0x7f,
+		.port_ops	= &vsc_sata_ops,
+	};
+	const struct ata_port_info *ppi[] = { &pi, NULL };
 	static int printed_version;
-	struct ata_probe_ent *probe_ent;
+	struct ata_host *host;
 	void __iomem *mmio_base;
-	int rc;
+	int i, rc;
 	u8 cls;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* allocate host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
+	if (!host)
+		return -ENOMEM;
+
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
 
-	/*
-	 * Check if we have needed resource mapped.
-	 */
+	/* check if we have needed resource mapped */
 	if (pci_resource_len(pdev, 0) == 0)
 		return -ENODEV;
 
+	/* map IO regions and intialize host accordingly */
 	rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
 	if (rc == -EBUSY)
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
+
+	mmio_base = host->iomap[VSC_MMIO_BAR];
+
+	for (i = 0; i < host->n_ports; i++)
+		vsc_sata_setup_port(&host->ports[i]->ioaddr,
+				    mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET);
 
 	/*
 	 * Use 32 bit DMA mask, because 64 bit address support is poor.
@@ -402,12 +421,6 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
 	/*
 	 * Due to a bug in the chip, the default cache line size can't be
 	 * used (unless the default is non-zero).
@@ -418,33 +431,6 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 
 	if (pci_enable_msi(pdev) == 0)
 		pci_intx(pdev, 0);
-	else
-		probe_ent->irq_flags = IRQF_SHARED;
-
-	probe_ent->sht = &vsc_sata_sht;
-	probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
-	probe_ent->port_ops = &vsc_sata_ops;
-	probe_ent->n_ports = 4;
-	probe_ent->irq = pdev->irq;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	/* We don't care much about the PIO/UDMA masks, but the core won't like us
-	 * if we don't fill these
-	 */
-	probe_ent->pio_mask = 0x1f;
-	probe_ent->mwdma_mask = 0x07;
-	probe_ent->udma_mask = 0x7f;
-
-	mmio_base = probe_ent->iomap[VSC_MMIO_BAR];
-
-	/* We have 4 ports per PCI function */
-	vsc_sata_setup_port(&probe_ent->port[0], mmio_base + 1 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[1], mmio_base + 2 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[2], mmio_base + 3 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[3], mmio_base + 4 * VSC_SATA_PORT_OFFSET);
-
-	pci_set_master(pdev);
 
 	/*
 	 * Config offset 0x98 is "Extended Control and Status Register 0"
@@ -454,11 +440,9 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	 */
 	pci_write_config_dword(pdev, 0x98, 0);
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, vsc_sata_interrupt,
+				 IRQF_SHARED, &vsc_sata_sht);
 }
 
 static const struct pci_device_id vsc_sata_pci_tbl[] = {

From 5d728824efeda61d304153bfcf1378a3c18b7d70 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:08 +0900
Subject: [PATCH 73/86] libata: convert the remaining PATA drivers to new init
 model

Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.

* init_one()'s now follow more consistent init order

* cs5520 now registers one host with two ports, not two hosts.  If any
  of the two ports are disabled, it's made dummy as other drivers do.

Tested pdc_adma and pata_legacy.  Both are as broken as before.  The
rest are compile tested only.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_cs5520.c    | 120 +++++++++++++++++++----------------
 drivers/ata/pata_isapnp.c    |  43 +++++++------
 drivers/ata/pata_ixp4xx_cf.c |  39 +++++-------
 drivers/ata/pata_legacy.c    |  36 +++++------
 drivers/ata/pata_mpc52xx.c   |  42 ++++++------
 drivers/ata/pata_mpiix.c     |  36 +++++------
 drivers/ata/pata_pcmcia.c    |  36 +++++------
 drivers/ata/pata_pdc2027x.c  |  98 +++++++++++-----------------
 drivers/ata/pata_platform.c  |  43 ++++++-------
 drivers/ata/pata_qdi.c       |  45 ++++++-------
 drivers/ata/pata_scc.c       |  51 +++++----------
 drivers/ata/pata_winbond.c   |  83 ++++++++++++------------
 drivers/ata/pdc_adma.c       |  85 ++++++++++---------------
 13 files changed, 345 insertions(+), 412 deletions(-)

diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index b5b27baa0be1..79bef0d1fad3 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -186,7 +186,6 @@ static struct ata_port_operations cs5520_port_ops = {
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -194,91 +193,104 @@ static struct ata_port_operations cs5520_port_ops = {
 	.port_start		= ata_port_start,
 };
 
-static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	struct ata_port_info pi = {
+		.flags		= ATA_FLAG_SLAVE_POSS,
+		.pio_mask	= 0x1f,
+		.port_ops	= &cs5520_port_ops,
+	};
+	const struct ata_port_info *ppi[2];
 	u8 pcicfg;
-	void __iomem *iomap[5];
-	static struct ata_probe_ent probe[2];
-	int ports = 0;
+	void *iomap[5];
+	struct ata_host *host;
+	struct ata_ioports *ioaddr;
+	int i, rc;
 
 	/* IDE port enable bits */
-	pci_read_config_byte(dev, 0x60, &pcicfg);
+	pci_read_config_byte(pdev, 0x60, &pcicfg);
 
 	/* Check if the ATA ports are enabled */
 	if ((pcicfg & 3) == 0)
 		return -ENODEV;
 
+	ppi[0] = ppi[1] = &ata_dummy_port_info;
+	if (pcicfg & 1)
+		ppi[0] = &pi;
+	if (pcicfg & 2)
+		ppi[1] = &pi;
+
 	if ((pcicfg & 0x40) == 0) {
-		printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n");
-		pci_write_config_byte(dev, 0x60, pcicfg | 0x40);
+		dev_printk(KERN_WARNING, &pdev->dev,
+			   "DMA mode disabled. Enabling.\n");
+		pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
 	}
 
+	pi.mwdma_mask = id->driver_data;
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+	if (!host)
+		return -ENOMEM;
+
 	/* Perform set up for DMA */
-	if (pci_enable_device_bars(dev, 1<<2)) {
+	if (pci_enable_device_bars(pdev, 1<<2)) {
 		printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
 		return -ENODEV;
 	}
-	pci_set_master(dev);
-	if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
+
+	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
 		return -ENODEV;
 	}
-	if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) {
+	if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
 		return -ENODEV;
 	}
 
-	/* Map IO ports */
-	iomap[0] = devm_ioport_map(&dev->dev, 0x1F0, 8);
-	iomap[1] = devm_ioport_map(&dev->dev, 0x3F6, 1);
-	iomap[2] = devm_ioport_map(&dev->dev, 0x170, 8);
-	iomap[3] = devm_ioport_map(&dev->dev, 0x376, 1);
-	iomap[4] = pcim_iomap(dev, 2, 0);
+	/* Map IO ports and initialize host accordingly */
+	iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8);
+	iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1);
+	iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8);
+	iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1);
+	iomap[4] = pcim_iomap(pdev, 2, 0);
 
 	if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4])
 		return -ENOMEM;
 
-	/* We have to do our own plumbing as the PCI setup for this
-	   chipset is non-standard so we can't punt to the libata code */
+	ioaddr = &host->ports[0]->ioaddr;
+	ioaddr->cmd_addr = iomap[0];
+	ioaddr->ctl_addr = iomap[1];
+	ioaddr->altstatus_addr = iomap[1];
+	ioaddr->bmdma_addr = iomap[4];
+	ata_std_ports(ioaddr);
 
-	INIT_LIST_HEAD(&probe[0].node);
-	probe[0].dev = pci_dev_to_dev(dev);
-	probe[0].port_ops = &cs5520_port_ops;
-	probe[0].sht = &cs5520_sht;
-	probe[0].pio_mask = 0x1F;
-	probe[0].mwdma_mask = id->driver_data;
-	probe[0].irq = 14;
-	probe[0].irq_flags = 0;
-	probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
-	probe[0].n_ports = 1;
-	probe[0].port[0].cmd_addr = iomap[0];
-	probe[0].port[0].ctl_addr = iomap[1];
-	probe[0].port[0].altstatus_addr = iomap[1];
-	probe[0].port[0].bmdma_addr = iomap[4];
+	ioaddr = &host->ports[1]->ioaddr;
+	ioaddr->cmd_addr = iomap[2];
+	ioaddr->ctl_addr = iomap[3];
+	ioaddr->altstatus_addr = iomap[3];
+	ioaddr->bmdma_addr = iomap[4] + 8;
+	ata_std_ports(ioaddr);
 
-	/* The secondary lurks at different addresses but is otherwise
-	   the same beastie */
+	/* activate the host */
+	pci_set_master(pdev);
+	rc = ata_host_start(host);
+	if (rc)
+		return rc;
 
-	probe[1] = probe[0];
-	INIT_LIST_HEAD(&probe[1].node);
-	probe[1].irq = 15;
-	probe[1].port[0].cmd_addr = iomap[2];
-	probe[1].port[0].ctl_addr = iomap[3];
-	probe[1].port[0].altstatus_addr = iomap[3];
-	probe[1].port[0].bmdma_addr = iomap[4] + 8;
+	for (i = 0; i < 2; i++) {
+		static const int irq[] = { 14, 15 };
+		struct ata_port *ap = host->ports[0];
 
-	/* Let libata fill in the port details */
-	ata_std_ports(&probe[0].port[0]);
-	ata_std_ports(&probe[1].port[0]);
+		if (ata_port_is_dummy(ap))
+			continue;
 
-	/* Now add the ports that are active */
-	if (pcicfg & 1)
-		ports += ata_device_add(&probe[0]);
-	if (pcicfg & 2)
-		ports += ata_device_add(&probe[1]);
-	if (ports)
-		return 0;
-	return -ENODEV;
+		rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
+				      ata_interrupt, 0, DRV_NAME, host);
+		if (rc)
+			return rc;
+	}
+
+	return ata_host_register(host, &cs5520_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 2580ab3146bf..d042efdfbac4 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -56,7 +56,6 @@ static struct ata_port_operations isapnp_port_ops = {
 
 	.data_xfer	= ata_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -75,8 +74,10 @@ static struct ata_port_operations isapnp_port_ops = {
 
 static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id)
 {
-	struct ata_probe_ent ae;
+	struct ata_host *host;
+	struct ata_port *ap;
 	void __iomem *cmd_addr, *ctl_addr;
+	int rc;
 
 	if (pnp_port_valid(idev, 0) == 0)
 		return -ENODEV;
@@ -85,34 +86,36 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 	if (pnp_irq_valid(idev, 0) == 0)
 		return -ENODEV;
 
+	/* allocate host */
+	host = ata_host_alloc(&idev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	cmd_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 0), 8);
 	if (!cmd_addr)
 		return -ENOMEM;
 
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &idev->dev;
-	ae.port_ops = &isapnp_port_ops;
-	ae.sht = &isapnp_sht;
-	ae.n_ports = 1;
-	ae.pio_mask = 1;		/* ISA so PIO 0 cycles */
-	ae.irq = pnp_irq(idev, 0);
-	ae.irq_flags = 0;
-	ae.port_flags = ATA_FLAG_SLAVE_POSS;
-	ae.port[0].cmd_addr = cmd_addr;
+	ap = host->ports[0];
+
+	ap->ops = &isapnp_port_ops;
+	ap->pio_mask = 1;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+	ap->ioaddr.cmd_addr = cmd_addr;
 
 	if (pnp_port_valid(idev, 1) == 0) {
 		ctl_addr = devm_ioport_map(&idev->dev,
 					   pnp_port_start(idev, 1), 1);
-		ae.port[0].altstatus_addr = ctl_addr;
-		ae.port[0].ctl_addr = ctl_addr;
-		ae.port_flags |= ATA_FLAG_SRST;
+		ap->ioaddr.altstatus_addr = ctl_addr;
+		ap->ioaddr.ctl_addr = ctl_addr;
 	}
-	ata_std_ports(&ae.port[0]);
 
-	if (ata_device_add(&ae) == 0)
-		return -ENODEV;
-	return 0;
+	ata_std_ports(&ap->ioaddr);
+
+	/* activate */
+	return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0,
+				 &isapnp_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 8257af84ff7c..420c343e5711 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -131,7 +131,6 @@ static struct ata_port_operations ixp4xx_port_ops = {
 	.data_xfer	= ixp4xx_mmio_data_xfer,
 	.cable_detect	= ata_cable_40wire,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ixp4xx_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -174,12 +173,12 @@ static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
 
 static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 {
-	int ret;
 	unsigned int irq;
 	struct resource *cs0, *cs1;
-	struct ata_probe_ent ae;
-
+	struct ata_host *host;
+	struct ata_port *ap;
 	struct ixp4xx_pata_data *data = pdev->dev.platform_data;
+	int rc;
 
 	cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -187,6 +186,12 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	if (!cs0 || !cs1)
 		return -EINVAL;
 
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
 
 	data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
@@ -200,32 +205,22 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	*data->cs0_cfg = data->cs0_bits;
 	*data->cs1_cfg = data->cs1_bits;
 
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
+	ap = host->ports[0];
 
-	ae.dev		= &pdev->dev;
-	ae.port_ops	= &ixp4xx_port_ops;
-	ae.sht		= &ixp4xx_sht;
-	ae.n_ports	= 1;
-	ae.pio_mask	= 0x1f; /* PIO4 */
-	ae.irq		= irq;
-	ae.irq_flags	= 0;
-	ae.port_flags	= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
-			| ATA_FLAG_NO_ATAPI | ATA_FLAG_SRST;
+	ap->ops	= &ixp4xx_port_ops;
+	ap->pio_mask = 0x1f; /* PIO4 */
+	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
 
 	/* run in polling mode if no irq has been assigned */
 	if (!irq)
-		ae.port_flags |= ATA_FLAG_PIO_POLLING;
+		ap->flags |= ATA_FLAG_PIO_POLLING;
 
-	ixp4xx_setup_port(&ae.port[0], data);
+	ixp4xx_setup_port(&ap->ioaddr, data);
 
 	dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 
-	ret = ata_device_add(&ae);
-	if (ret == 0)
-		return -ENODEV;
-
-	return 0;
+	/* activate host */
+	return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
 }
 
 static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 0b1749a84df2..707099291e01 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -716,7 +716,8 @@ static struct ata_port_operations opti82c46x_port_ops = {
 static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
 {
 	struct legacy_data *ld = &legacy_data[nr_legacy_host];
-	struct ata_probe_ent ae;
+	struct ata_host *host;
+	struct ata_port *ap;
 	struct platform_device *pdev;
 	struct ata_port_operations *ops = &legacy_port_ops;
 	void __iomem *io_addr, *ctrl_addr;
@@ -798,24 +799,23 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
 	if (ops == &legacy_port_ops && (autospeed & mask))
 		ops = &simple_port_ops;
 
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &pdev->dev;
-	ae.port_ops = ops;
-	ae.sht = &legacy_sht;
-	ae.n_ports = 1;
-	ae.pio_mask = pio_modes;
-	ae.irq = irq;
-	ae.irq_flags = 0;
-	ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST|iordy;
-	ae.port[0].cmd_addr = io_addr;
-	ae.port[0].altstatus_addr = ctrl_addr;
-	ae.port[0].ctl_addr = ctrl_addr;
-	ata_std_ports(&ae.port[0]);
-	ae.private_data = ld;
+	ret = -ENOMEM;
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		goto fail;
+	ap = host->ports[0];
 
-	ret = -ENODEV;
-	if (!ata_device_add(&ae))
+	ap->ops = ops;
+	ap->pio_mask = pio_modes;
+	ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+	ap->ioaddr.cmd_addr = io_addr;
+	ap->ioaddr.altstatus_addr = ctrl_addr;
+	ap->ioaddr.ctl_addr = ctrl_addr;
+	ata_std_ports(&ap->ioaddr);
+	ap->private_data = ld;
+
+	ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
+	if (ret)
 		goto fail;
 
 	legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 77b57321ff52..9587a89f9683 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -301,35 +301,33 @@ static struct ata_port_operations mpc52xx_ata_port_ops = {
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 	.port_start		= ata_port_start,
 };
 
-static struct ata_probe_ent mpc52xx_ata_probe_ent = {
-	.port_ops	= &mpc52xx_ata_port_ops,
-	.sht		= &mpc52xx_ata_sht,
-	.n_ports	= 1,
-	.pio_mask	= 0x1f,		/* Up to PIO4 */
-	.mwdma_mask	= 0x00,		/* No MWDMA   */
-	.udma_mask	= 0x00,		/* No UDMA    */
-	.port_flags	= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-	.irq_flags	= 0,
-};
-
 static int __devinit
 mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv)
 {
-	struct ata_probe_ent *ae = &mpc52xx_ata_probe_ent;
-	struct ata_ioports *aio = &ae->port[0];
-	int rv;
+	struct ata_host *host;
+	struct ata_port *ap;
+	struct ata_ioports *aio;
+	int rc;
 
-	INIT_LIST_HEAD(&ae->node);
-	ae->dev = dev;
-	ae->irq = priv->ata_irq;
+	host = ata_host_alloc(dev, 1);
+	if (!host)
+		return -ENOMEM;
 
+	ap = host->ports[0];
+	ap->flags		|= ATA_FLAG_SLAVE_POSS;
+	ap->pio_mask		= 0x1f;	/* Up to PIO4 */
+	ap->mwdma_mask		= 0x00;	/* No MWDMA   */
+	ap->udma_mask		= 0x00;	/* No UDMA    */
+	ap->ops			= &mpc52xx_ata_port_ops;
+	host->private_data	= priv;
+
+	aio = &ap->ioaddr;
 	aio->cmd_addr		= NULL;	/* Don't have a classic reg block */
 	aio->altstatus_addr	= &priv->ata_regs->tf_control;
 	aio->ctl_addr		= &priv->ata_regs->tf_control;
@@ -344,11 +342,9 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv)
 	aio->status_addr	= &priv->ata_regs->tf_command;
 	aio->command_addr	= &priv->ata_regs->tf_command;
 
-	ae->private_data = priv;
-
-	rv = ata_device_add(ae);
-
-	return rv ? 0 : -EINVAL;
+	/* activate host */
+	return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0,
+				 &mpc52xx_ata_sht);
 }
 
 static struct mpc52xx_ata_priv *
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 1718eaca731f..987c5fafab08 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -190,7 +190,6 @@ static struct ata_port_operations mpiix_port_ops = {
 	.qc_issue	= mpiix_qc_issue_prot,
 	.data_xfer	= ata_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -201,8 +200,9 @@ static struct ata_port_operations mpiix_port_ops = {
 static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	/* Single threaded by the PCI probe logic */
-	static struct ata_probe_ent probe;
 	static int printed_version;
+	struct ata_host *host;
+	struct ata_port *ap;
 	void __iomem *cmd_addr, *ctl_addr;
 	u16 idetim;
 	int irq;
@@ -210,6 +210,10 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
+	host = ata_host_alloc(&dev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+
 	/* MPIIX has many functions which can be turned on or off according
 	   to other devices present. Make sure IDE is enabled before we try
 	   and use it */
@@ -238,27 +242,21 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	   without BARs set fools the setup.  #2 If you pci_disable_device
 	   the MPIIX your box goes castors up */
 
-	INIT_LIST_HEAD(&probe.node);
-	probe.dev = pci_dev_to_dev(dev);
-	probe.port_ops = &mpiix_port_ops;
-	probe.sht = &mpiix_sht;
-	probe.pio_mask = 0x1F;
-	probe.irq_flags = IRQF_SHARED;
-	probe.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
-	probe.n_ports = 1;
+	ap = host->ports[0];
+	ap->ops = &mpiix_port_ops;
+	ap->pio_mask = 0x1F;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
-	probe.irq = irq;
-	probe.port[0].cmd_addr = cmd_addr;
-	probe.port[0].ctl_addr = ctl_addr;
-	probe.port[0].altstatus_addr = ctl_addr;
+	ap->ioaddr.cmd_addr = cmd_addr;
+	ap->ioaddr.ctl_addr = ctl_addr;
+	ap->ioaddr.altstatus_addr = ctl_addr;
 
 	/* Let libata fill in the port details */
-	ata_std_ports(&probe.port[0]);
+	ata_std_ports(&ap->ioaddr);
 
-	/* Now add the port that is active */
-	if (ata_device_add(&probe))
-		return 0;
-	return -ENODEV;
+	/* activate host */
+	return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED,
+				 &mpiix_sht);
 }
 
 static const struct pci_device_id mpiix[] = {
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 171da0aeb65f..75dc84797ff3 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -125,7 +125,6 @@ static struct ata_port_operations pcmcia_port_ops = {
 
 	.data_xfer	= ata_data_xfer_noirq,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -146,7 +145,8 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 static int pcmcia_init_one(struct pcmcia_device *pdev)
 {
-	struct ata_probe_ent ae;
+	struct ata_host *host;
+	struct ata_port *ap;
 	struct ata_pcmcia_info *info;
 	tuple_t tuple;
 	struct {
@@ -290,24 +290,24 @@ next_entry:
  	 *	Having done the PCMCIA plumbing the ATA side is relatively
  	 *	sane.
 	 */
+	ret = -ENOMEM;
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		goto failed;
+	ap = host->ports[0];
 
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &pdev->dev;
-	ae.port_ops = &pcmcia_port_ops;
-	ae.sht = &pcmcia_sht;
-	ae.n_ports = 1;
-	ae.pio_mask = 1;		/* ISA so PIO 0 cycles */
-	ae.irq = pdev->irq.AssignedIRQ;
-	ae.irq_flags = IRQF_SHARED;
-	ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
-	ae.port[0].cmd_addr = io_addr;
-	ae.port[0].altstatus_addr = ctl_addr;
-	ae.port[0].ctl_addr = ctl_addr;
-	ata_std_ports(&ae.port[0]);
+	ap->ops = &pcmcia_port_ops;
+	ap->pio_mask = 1;		/* ISA so PIO 0 cycles */
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+	ap->ioaddr.cmd_addr = io_addr;
+	ap->ioaddr.altstatus_addr = ctl_addr;
+	ap->ioaddr.ctl_addr = ctl_addr;
+	ata_std_ports(&ap->ioaddr);
 
-	ret = -ENODEV;
-	if (ata_device_add(&ae) == 0)
+	/* activate */
+	ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
+				IRQF_SHARED, &pcmcia_sht);
+	if (ret)
 		goto failed;
 
 	info->ndev = 1;
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 8261f4f8c1dc..a61cbc110688 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -171,7 +171,6 @@ static struct ata_port_operations pdc2027x_pata100_ops = {
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= pdc2027x_cable_detect,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -207,7 +206,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
 	.cable_detect		= pdc2027x_cable_detect,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -218,7 +216,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
 static struct ata_port_info pdc2027x_port_info[] = {
 	/* PDC_UDMA_100 */
 	{
-		.sht		= &pdc2027x_sht,
 		.flags		= ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
 		                  ATA_FLAG_MMIO,
 		.pio_mask	= 0x1f, /* pio0-4 */
@@ -228,7 +225,6 @@ static struct ata_port_info pdc2027x_port_info[] = {
 	},
 	/* PDC_UDMA_133 */
 	{
-		.sht		= &pdc2027x_sht,
 		.flags		= ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
                         	  ATA_FLAG_MMIO,
 		.pio_mask	= 0x1f, /* pio0-4 */
@@ -555,12 +551,12 @@ static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc)
 
 /**
  * pdc_read_counter - Read the ctr counter
- * @probe_ent: for the port address
+ * @host: target ATA host
  */
 
-static long pdc_read_counter(struct ata_probe_ent *probe_ent)
+static long pdc_read_counter(struct ata_host *host)
 {
-	void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 	long counter;
 	int retry = 1;
 	u32 bccrl, bccrh, bccrlv, bccrhv;
@@ -598,12 +594,12 @@ retry:
  * adjust_pll - Adjust the PLL input clock in Hz.
  *
  * @pdc_controller: controller specific information
- * @probe_ent: For the port address
+ * @host: target ATA host
  * @pll_clock: The input of PLL in HZ
  */
-static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx)
+static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx)
 {
-	void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 	u16 pll_ctl;
 	long pll_clock_khz = pll_clock / 1000;
 	long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;
@@ -683,19 +679,19 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi
 
 /**
  * detect_pll_input_clock - Detect the PLL input clock in Hz.
- * @probe_ent: for the port address
+ * @host: target ATA host
  * Ex. 16949000 on 33MHz PCI bus for pdc20275.
  *     Half of the PCI clock.
  */
-static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
+static long pdc_detect_pll_input_clock(struct ata_host *host)
 {
-	void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+	void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 	u32 scr;
 	long start_count, end_count;
 	long pll_clock;
 
 	/* Read current counter value */
-	start_count = pdc_read_counter(probe_ent);
+	start_count = pdc_read_counter(host);
 
 	/* Start the test mode */
 	scr = readl(mmio_base + PDC_SYS_CTL);
@@ -707,7 +703,7 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
 	mdelay(100);
 
 	/* Read the counter values again */
-	end_count = pdc_read_counter(probe_ent);
+	end_count = pdc_read_counter(host);
 
 	/* Stop the test mode */
 	scr = readl(mmio_base + PDC_SYS_CTL);
@@ -726,11 +722,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
 
 /**
  * pdc_hardware_init - Initialize the hardware.
- * @pdev: instance of pci_dev found
- * @pdc_controller: controller specific information
- * @pe:  for the port address
+ * @host: target ATA host
+ * @board_idx: board identifier
  */
-static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, unsigned int board_idx)
+static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
 {
 	long pll_clock;
 
@@ -740,15 +735,15 @@ static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, uns
 	 * Ex. 25MHz or 40MHz, we have to adjust the cycle_time.
 	 * The pdc20275 controller employs PLL circuit to help correct timing registers setting.
 	 */
-	pll_clock = pdc_detect_pll_input_clock(pe);
+	pll_clock = pdc_detect_pll_input_clock(host);
 
 	if (pll_clock < 0) /* counter overflow? Try again. */
-		pll_clock = pdc_detect_pll_input_clock(pe);
+		pll_clock = pdc_detect_pll_input_clock(host);
 
-	dev_printk(KERN_INFO, &pdev->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
+	dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
 
 	/* Adjust PLL control register */
-	pdc_adjust_pll(pe, pll_clock, board_idx);
+	pdc_adjust_pll(host, pll_clock, board_idx);
 
 	return 0;
 }
@@ -780,8 +775,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
  * Called when an instance of PCI adapter is inserted.
  * This function checks whether the hardware is supported,
  * initialize hardware and register an instance of ata_host to
- * libata by providing struct ata_probe_ent and ata_device_add().
- * (implements struct pci_driver.probe() )
+ * libata.  (implements struct pci_driver.probe() )
  *
  * @pdev: instance of pci_dev found
  * @ent:  matching entry in the id_tbl[]
@@ -790,14 +784,21 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 {
 	static int printed_version;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
-
-	struct ata_probe_ent *probe_ent;
+	const struct ata_port_info *ppi[] =
+		{ &pdc2027x_port_info[board_idx], NULL };
+	struct ata_host *host;
 	void __iomem *mmio_base;
 	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* alloc host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -805,6 +806,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 	rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
@@ -814,46 +816,22 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 	if (rc)
 		return rc;
 
-	/* Prepare the probe entry */
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
+	mmio_base = host->iomap[PDC_MMIO_BAR];
 
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
+	pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0);
+	host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000;
+	pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0);
+	host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008;
 
-	probe_ent->sht		= pdc2027x_port_info[board_idx].sht;
-	probe_ent->port_flags	= pdc2027x_port_info[board_idx].flags;
-	probe_ent->pio_mask	= pdc2027x_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= pdc2027x_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= pdc2027x_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= pdc2027x_port_info[board_idx].port_ops;
-
-       	probe_ent->irq = pdev->irq;
-       	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
-
-	pdc_ata_setup_port(&probe_ent->port[0], mmio_base + 0x17c0);
-	probe_ent->port[0].bmdma_addr = mmio_base + 0x1000;
-	pdc_ata_setup_port(&probe_ent->port[1], mmio_base + 0x15c0);
-	probe_ent->port[1].bmdma_addr = mmio_base + 0x1008;
-
-	probe_ent->n_ports = 2;
-
-	pci_set_master(pdev);
 	//pci_enable_intx(pdev);
 
 	/* initialize adapter */
-	if (pdc_hardware_init(pdev, probe_ent, board_idx) != 0)
+	if (pdc_hardware_init(host, board_idx) != 0)
 		return -EIO;
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &pdc2027x_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 507eb1ee05f8..a0a650c7f272 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -87,7 +87,6 @@ static struct ata_port_operations pata_platform_port_ops = {
 
 	.data_xfer		= ata_data_xfer_noirq,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -136,7 +135,8 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
 static int __devinit pata_platform_probe(struct platform_device *pdev)
 {
 	struct resource *io_res, *ctl_res;
-	struct ata_probe_ent ae;
+	struct ata_host *host;
+	struct ata_port *ap;
 	unsigned int mmio;
 
 	/*
@@ -176,44 +176,41 @@ static int __devinit pata_platform_probe(struct platform_device *pdev)
 	/*
 	 * Now that that's out of the way, wire up the port..
 	 */
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &pdev->dev;
-	ae.port_ops = &pata_platform_port_ops;
-	ae.sht = &pata_platform_sht;
-	ae.n_ports = 1;
-	ae.pio_mask = pio_mask;
-	ae.irq = platform_get_irq(pdev, 0);
-	ae.irq_flags = 0;
-	ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		return -ENOMEM;
+	ap = host->ports[0];
+
+	ap->ops = &pata_platform_port_ops;
+	ap->pio_mask = pio_mask;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	/*
 	 * Handle the MMIO case
 	 */
 	if (mmio) {
-		ae.port[0].cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
+		ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
 				io_res->end - io_res->start + 1);
-		ae.port[0].ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
+		ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
 				ctl_res->end - ctl_res->start + 1);
 	} else {
-		ae.port[0].cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
+		ap->ioaddr.cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
 				io_res->end - io_res->start + 1);
-		ae.port[0].ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
+		ap->ioaddr.ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
 				ctl_res->end - ctl_res->start + 1);
 	}
-	if (!ae.port[0].cmd_addr || !ae.port[0].ctl_addr) {
+	if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
 		dev_err(&pdev->dev, "failed to map IO/CTL base\n");
 		return -ENOMEM;
 	}
 
-	ae.port[0].altstatus_addr = ae.port[0].ctl_addr;
+	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
 
-	pata_platform_setup_port(&ae.port[0], pdev->dev.platform_data);
+	pata_platform_setup_port(&ap->ioaddr, pdev->dev.platform_data);
 
-	if (unlikely(ata_device_add(&ae) == 0))
-		return -ENODEV;
-
-	return 0;
+	/* activate */
+	return ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt,
+				 0, &pata_platform_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 44472641db28..27685ce63ceb 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -190,7 +190,6 @@ static struct ata_port_operations qdi6500_port_ops = {
 
 	.data_xfer	= qdi_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -219,7 +218,6 @@ static struct ata_port_operations qdi6580_port_ops = {
 
 	.data_xfer	= qdi_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -240,8 +238,9 @@ static struct ata_port_operations qdi6580_port_ops = {
 
 static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
 {
-	struct ata_probe_ent ae;
 	struct platform_device *pdev;
+	struct ata_host *host;
+	struct ata_port *ap;
 	void __iomem *io_addr, *ctl_addr;
 	int ret;
 
@@ -259,34 +258,31 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
 	if (!io_addr || !ctl_addr)
 		goto fail;
 
-	memset(&ae, 0, sizeof(struct ata_probe_ent));
-	INIT_LIST_HEAD(&ae.node);
-	ae.dev = &pdev->dev;
+	ret = -ENOMEM;
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		goto fail;
+	ap = host->ports[0];
 
 	if (type == 6580) {
-		ae.port_ops = &qdi6580_port_ops;
-		ae.pio_mask = 0x1F;
-		ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+		ap->ops = &qdi6580_port_ops;
+		ap->pio_mask = 0x1F;
+		ap->flags |= ATA_FLAG_SLAVE_POSS;
 	} else {
-		ae.port_ops = &qdi6500_port_ops;
-		ae.pio_mask = 0x07;	/* Actually PIO3 !IORDY is possible */
-		ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
-				ATA_FLAG_NO_IORDY;
+		ap->ops = &qdi6500_port_ops;
+		ap->pio_mask = 0x07;	/* Actually PIO3 !IORDY is possible */
+		ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
 	}
 
-	ae.sht = &qdi_sht;
-	ae.n_ports = 1;
-	ae.irq = irq;
-	ae.irq_flags = 0;
-	ae.port[0].cmd_addr = io_addr;
-	ae.port[0].altstatus_addr = ctl_addr;
-	ae.port[0].ctl_addr = ctl_addr;
-	ata_std_ports(&ae.port[0]);
+	ap->ioaddr.cmd_addr = io_addr;
+	ap->ioaddr.altstatus_addr = ctl_addr;
+	ap->ioaddr.ctl_addr = ctl_addr;
+	ata_std_ports(&ap->ioaddr);
 
 	/*
 	 *	Hook in a private data structure per channel
 	 */
-	ae.private_data = &qdi_data[nr_qdi_host];
+	ap->private_data = &qdi_data[nr_qdi_host];
 
 	qdi_data[nr_qdi_host].timing = port;
 	qdi_data[nr_qdi_host].fast = fast;
@@ -294,8 +290,9 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
 
 	printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
 
-	ret = -ENODEV;
-	if (!ata_device_add(&ae))
+	/* activate */
+	ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht);
+	if (ret)
 		goto fail;
 
 	qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index f3ed141fdc0e..5df354d573e8 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -1016,7 +1016,6 @@ static const struct ata_port_operations scc_pata_ops = {
 	.error_handler		= scc_error_handler,
 	.post_internal_cmd	= scc_bmdma_stop,
 
-	.irq_handler		= ata_interrupt,
 	.irq_clear		= scc_bmdma_irq_clear,
 	.irq_on			= scc_irq_on,
 	.irq_ack		= scc_irq_ack,
@@ -1027,7 +1026,6 @@ static const struct ata_port_operations scc_pata_ops = {
 
 static struct ata_port_info scc_port_info[] = {
 	{
-		.sht		= &scc_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x00,
@@ -1040,10 +1038,10 @@ static struct ata_port_info scc_port_info[] = {
  *	scc_reset_controller - initialize SCC PATA controller.
  */
 
-static int scc_reset_controller(struct ata_probe_ent *probe_ent)
+static int scc_reset_controller(struct ata_host *host)
 {
-	void __iomem *ctrl_base = probe_ent->iomap[SCC_CTRL_BAR];
-	void __iomem *bmid_base = probe_ent->iomap[SCC_BMID_BAR];
+	void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR];
+	void __iomem *bmid_base = host->iomap[SCC_BMID_BAR];
 	void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
 	void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
 	void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
@@ -1104,17 +1102,15 @@ static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
 	ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
 }
 
-static int scc_host_init(struct ata_probe_ent *probe_ent)
+static int scc_host_init(struct ata_host *host)
 {
-	struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+	struct pci_dev *pdev = to_pci_dev(host->dev);
 	int rc;
 
-	rc = scc_reset_controller(probe_ent);
+	rc = scc_reset_controller(host);
 	if (rc)
 		return rc;
 
-	probe_ent->n_ports = 1;
-
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
@@ -1122,7 +1118,7 @@ static int scc_host_init(struct ata_probe_ent *probe_ent)
 	if (rc)
 		return rc;
 
-	scc_setup_ports(&probe_ent->port[0], probe_ent->iomap[SCC_BMID_BAR]);
+	scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]);
 
 	pci_set_master(pdev);
 
@@ -1145,14 +1141,18 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
+	const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
 	struct device *dev = &pdev->dev;
-	struct ata_probe_ent *probe_ent;
 	int rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
+	host = ata_port_alloc_pinfo(&pdev->dev, ppi, 1);
+	if (!host)
+		return -ENOMEM;
+
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -1162,33 +1162,14 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		pcim_pin_device(pdev);
 	if (rc)
 		return rc;
+	host->iomap = pcim_iomap_table(pdev);
 
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (!probe_ent)
-		return -ENOMEM;
-
-	probe_ent->dev = dev;
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht 		= scc_port_info[board_idx].sht;
-	probe_ent->port_flags 	= scc_port_info[board_idx].flags;
-	probe_ent->pio_mask 	= scc_port_info[board_idx].pio_mask;
-	probe_ent->udma_mask 	= scc_port_info[board_idx].udma_mask;
-	probe_ent->port_ops 	= scc_port_info[board_idx].port_ops;
-
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->iomap = pcim_iomap_table(pdev);
-
-	rc = scc_host_init(probe_ent);
+	rc = scc_host_init(host);
 	if (rc)
 		return rc;
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(dev, probe_ent);
-	return 0;
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &scc_sht);
 }
 
 static struct pci_driver scc_pci_driver = {
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 434f14f6f869..aa6d4bca2ea3 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -158,7 +158,6 @@ static struct ata_port_operations winbond_port_ops = {
 
 	.data_xfer	= winbond_data_xfer,
 
-	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
 	.irq_on		= ata_irq_on,
 	.irq_ack	= ata_irq_ack,
@@ -179,11 +178,9 @@ static struct ata_port_operations winbond_port_ops = {
 
 static __init int winbond_init_one(unsigned long port)
 {
-	struct ata_probe_ent ae;
 	struct platform_device *pdev;
-	int ret;
 	u8 reg;
-	int i;
+	int i, rc;
 
 	reg = winbond_readcfg(port, 0x81);
 	reg |= 0x80;	/* jumpered mode off */
@@ -202,58 +199,56 @@ static __init int winbond_init_one(unsigned long port)
 
 	for (i = 0; i < 2 ; i ++) {
 		unsigned long cmd_port = 0x1F0 - (0x80 * i);
+		struct ata_host *host;
+		struct ata_port *ap;
 		void __iomem *cmd_addr, *ctl_addr;
 
-		if (reg & (1 << i)) {
-			/*
-			 *	Fill in a probe structure first of all
-			 */
+		if (!(reg & (1 << i)))
+			continue;
 
-			pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
-			if (IS_ERR(pdev))
-				return PTR_ERR(pdev);
+		pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
 
-			cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
-			ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1);
-			if (!cmd_addr || !ctl_addr) {
-				platform_device_unregister(pdev);
-				return -ENOMEM;
-			}
+		rc = -ENOMEM;
+		host = ata_host_alloc(&pdev->dev, 1);
+		if (!host)
+			goto err_unregister;
 
-			memset(&ae, 0, sizeof(struct ata_probe_ent));
-			INIT_LIST_HEAD(&ae.node);
-			ae.dev = &pdev->dev;
+		rc = -ENOMEM;
+		cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
+		ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1);
+		if (!cmd_addr || !ctl_addr)
+			goto err_unregister;
 
-			ae.port_ops = &winbond_port_ops;
-			ae.pio_mask = 0x1F;
+		ap = host->ports[0];
+		ap->ops = &winbond_port_ops;
+		ap->pio_mask = 0x1F;
+		ap->flags |= ATA_FLAG_SLAVE_POSS;
+		ap->ioaddr.cmd_addr = cmd_addr;
+		ap->ioaddr.altstatus_addr = ctl_addr;
+		ap->ioaddr.ctl_addr = ctl_addr;
+		ata_std_ports(&ap->ioaddr);
 
-			ae.sht = &winbond_sht;
+		/* hook in a private data structure per channel */
+		host->private_data = &winbond_data[nr_winbond_host];
+		winbond_data[nr_winbond_host].config = port;
+		winbond_data[nr_winbond_host].platform_dev = pdev;
 
-			ae.n_ports = 1;
-			ae.irq = 14 + i;
-			ae.irq_flags = 0;
-			ae.port_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
-			ae.port[0].cmd_addr = cmd_addr;
-			ae.port[0].altstatus_addr = ctl_addr;
-			ae.port[0].ctl_addr = ctl_addr;
-			ata_std_ports(&ae.port[0]);
-			/*
-			 *	Hook in a private data structure per channel
-			 */
-			ae.private_data = &winbond_data[nr_winbond_host];
-			winbond_data[nr_winbond_host].config = port;
-			winbond_data[nr_winbond_host].platform_dev = pdev;
+		/* activate */
+		rc = ata_host_activate(host, 14 + i, ata_interrupt, 0,
+				       &winbond_sht);
+		if (rc)
+			goto err_unregister;
 
-			ret = ata_device_add(&ae);
-			if (ret == 0) {
-				platform_device_unregister(pdev);
-				return -ENODEV;
-			}
-			winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
-		}
+		winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
 	}
 
 	return 0;
+
+ err_unregister:
+	platform_device_unregister(pdev);
+	return rc;
 }
 
 /**
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 5dd3ca8b5f29..52b69530ab29 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -52,9 +52,9 @@
 /* macro to calculate base address for ADMA regs */
 #define ADMA_REGS(base,port_no)		((base) + 0x80 + ((port_no) * 0x20))
 
-/* macro to obtain addresses from ata_host */
-#define ADMA_HOST_REGS(host,port_no) \
-	ADMA_REGS((host)->iomap[ADMA_MMIO_BAR], port_no)
+/* macro to obtain addresses from ata_port */
+#define ADMA_PORT_REGS(ap) \
+	ADMA_REGS((ap)->host->iomap[ADMA_MMIO_BAR], ap->port_no)
 
 enum {
 	ADMA_MMIO_BAR		= 4,
@@ -128,7 +128,6 @@ struct adma_port_priv {
 
 static int adma_ata_init_one (struct pci_dev *pdev,
 				const struct pci_device_id *ent);
-static irqreturn_t adma_intr (int irq, void *dev_instance);
 static int adma_port_start(struct ata_port *ap);
 static void adma_host_stop(struct ata_host *host);
 static void adma_port_stop(struct ata_port *ap);
@@ -172,7 +171,6 @@ static const struct ata_port_operations adma_ata_ops = {
 	.qc_issue		= adma_qc_issue,
 	.eng_timeout		= adma_eng_timeout,
 	.data_xfer		= ata_data_xfer,
-	.irq_handler		= adma_intr,
 	.irq_clear		= adma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -186,7 +184,6 @@ static const struct ata_port_operations adma_ata_ops = {
 static struct ata_port_info adma_port_info[] = {
 	/* board_1841_idx */
 	{
-		.sht		= &adma_ata_sht,
 		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
 				  ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_POLLING,
@@ -229,8 +226,10 @@ static void adma_irq_clear(struct ata_port *ap)
 	/* nothing */
 }
 
-static void adma_reset_engine(void __iomem *chan)
+static void adma_reset_engine(struct ata_port *ap)
 {
+	void __iomem *chan = ADMA_PORT_REGS(ap);
+
 	/* reset ADMA to idle state */
 	writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
 	udelay(2);
@@ -241,14 +240,14 @@ static void adma_reset_engine(void __iomem *chan)
 static void adma_reinit_engine(struct ata_port *ap)
 {
 	struct adma_port_priv *pp = ap->private_data;
-	void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
+	void __iomem *chan = ADMA_PORT_REGS(ap);
 
 	/* mask/clear ATA interrupts */
 	writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
 	ata_check_status(ap);
 
 	/* reset the ADMA engine */
-	adma_reset_engine(chan);
+	adma_reset_engine(ap);
 
 	/* set in-FIFO threshold to 0x100 */
 	writew(0x100, chan + ADMA_FIFO_IN);
@@ -268,7 +267,7 @@ static void adma_reinit_engine(struct ata_port *ap)
 
 static inline void adma_enter_reg_mode(struct ata_port *ap)
 {
-	void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
+	void __iomem *chan = ADMA_PORT_REGS(ap);
 
 	writew(aPIOMD4, chan + ADMA_CONTROL);
 	readb(chan + ADMA_STATUS);	/* flush */
@@ -415,7 +414,7 @@ static void adma_qc_prep(struct ata_queued_cmd *qc)
 static inline void adma_packet_start(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
-	void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
+	void __iomem *chan = ADMA_PORT_REGS(ap);
 
 	VPRINTK("ENTER, ap %p\n", ap);
 
@@ -453,7 +452,7 @@ static inline unsigned int adma_intr_pkt(struct ata_host *host)
 		struct ata_port *ap = host->ports[port_no];
 		struct adma_port_priv *pp;
 		struct ata_queued_cmd *qc;
-		void __iomem *chan = ADMA_HOST_REGS(host, port_no);
+		void __iomem *chan = ADMA_PORT_REGS(ap);
 		u8 status = readb(chan + ADMA_STATUS);
 
 		if (status == 0)
@@ -575,7 +574,7 @@ static int adma_port_start(struct ata_port *ap)
 
 static void adma_port_stop(struct ata_port *ap)
 {
-	adma_reset_engine(ADMA_HOST_REGS(ap->host, ap->port_no));
+	adma_reset_engine(ap);
 }
 
 static void adma_host_stop(struct ata_host *host)
@@ -583,21 +582,19 @@ static void adma_host_stop(struct ata_host *host)
 	unsigned int port_no;
 
 	for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
-		adma_reset_engine(ADMA_HOST_REGS(host, port_no));
+		adma_reset_engine(host->ports[port_no]);
 }
 
-static void adma_host_init(unsigned int chip_id,
-				struct ata_probe_ent *probe_ent)
+static void adma_host_init(struct ata_host *host, unsigned int chip_id)
 {
 	unsigned int port_no;
-	void __iomem *mmio_base = probe_ent->iomap[ADMA_MMIO_BAR];
 
 	/* enable/lock aGO operation */
-	writeb(7, mmio_base + ADMA_MODE_LOCK);
+	writeb(7, host->iomap[ADMA_MMIO_BAR] + ADMA_MODE_LOCK);
 
 	/* reset the ADMA logic */
 	for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
-		adma_reset_engine(ADMA_REGS(mmio_base, port_no));
+		adma_reset_engine(host->ports[port_no]);
 }
 
 static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
@@ -623,14 +620,21 @@ static int adma_ata_init_one(struct pci_dev *pdev,
 			     const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent = NULL;
-	void __iomem *mmio_base;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
+	const struct ata_port_info *ppi[] = { &adma_port_info[board_idx], NULL };
+	struct ata_host *host;
+	void __iomem *mmio_base;
 	int rc, port_no;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* alloc host */
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, ADMA_PORTS);
+	if (!host)
+		return -ENOMEM;
+
+	/* acquire resources and fill host */
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -641,46 +645,23 @@ static int adma_ata_init_one(struct pci_dev *pdev,
 	rc = pcim_iomap_regions(pdev, 1 << ADMA_MMIO_BAR, DRV_NAME);
 	if (rc)
 		return rc;
-	mmio_base = pcim_iomap_table(pdev)[ADMA_MMIO_BAR];
+	host->iomap = pcim_iomap_table(pdev);
+	mmio_base = host->iomap[ADMA_MMIO_BAR];
 
 	rc = adma_set_dma_masks(pdev, mmio_base);
 	if (rc)
 		return rc;
 
-	probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL)
-		return -ENOMEM;
-
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	probe_ent->sht		= adma_port_info[board_idx].sht;
-	probe_ent->port_flags	= adma_port_info[board_idx].flags;
-	probe_ent->pio_mask	= adma_port_info[board_idx].pio_mask;
-	probe_ent->mwdma_mask	= adma_port_info[board_idx].mwdma_mask;
-	probe_ent->udma_mask	= adma_port_info[board_idx].udma_mask;
-	probe_ent->port_ops	= adma_port_info[board_idx].port_ops;
-
-	probe_ent->irq		= pdev->irq;
-	probe_ent->irq_flags	= IRQF_SHARED;
-	probe_ent->n_ports	= ADMA_PORTS;
-	probe_ent->iomap	= pcim_iomap_table(pdev);
-
-	for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
-		adma_ata_setup_port(&probe_ent->port[port_no],
+	for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
+		adma_ata_setup_port(&host->ports[port_no]->ioaddr,
 				    ADMA_ATA_REGS(mmio_base, port_no));
-	}
-
-	pci_set_master(pdev);
 
 	/* initialize adapter */
-	adma_host_init(board_idx, probe_ent);
+	adma_host_init(host, board_idx);
 
-	if (!ata_device_add(probe_ent))
-		return -ENODEV;
-
-	devm_kfree(&pdev->dev, probe_ent);
-	return 0;
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, adma_intr, IRQF_SHARED,
+				 &adma_ata_sht);
 }
 
 static int __init adma_ata_init(void)

From 6bfff31e77cfa1b13490337e5a4dbaa3407e83ac Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 17 Apr 2007 23:44:08 +0900
Subject: [PATCH 74/86] libata: kill probe_ent and related helpers

All drivers are converted to new init model.  Kill probe_ent,
ata_device_add() and ata_pci_init_native_mode().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 153 --------------------------------------
 drivers/ata/libata-sff.c  |  95 -----------------------
 drivers/ata/libata.h      |   2 -
 include/linux/libata.h    |  31 --------
 4 files changed, 281 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2a38aa2841fd..b5839f84b384 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6132,131 +6132,6 @@ int ata_host_activate(struct ata_host *host, int irq,
 	return rc;
 }
 
-/**
- *	ata_device_add - Register hardware device with ATA and SCSI layers
- *	@ent: Probe information describing hardware device to be registered
- *
- *	This function processes the information provided in the probe
- *	information struct @ent, allocates the necessary ATA and SCSI
- *	host information structures, initializes them, and registers
- *	everything with requisite kernel subsystems.
- *
- *	This function requests irqs, probes the ATA bus, and probes
- *	the SCSI bus.
- *
- *	LOCKING:
- *	PCI/etc. bus probe sem.
- *
- *	RETURNS:
- *	Number of ports registered.  Zero on error (no ports registered).
- */
-int ata_device_add(const struct ata_probe_ent *ent)
-{
-	unsigned int i;
-	struct device *dev = ent->dev;
-	struct ata_host *host;
-	int rc;
-
-	DPRINTK("ENTER\n");
-
-	if (ent->irq == 0) {
-		dev_printk(KERN_ERR, dev, "is not available: No interrupt assigned.\n");
-		return 0;
-	}
-
-	if (!ent->port_ops->error_handler &&
-	    !(ent->port_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
-		dev_printk(KERN_ERR, dev, "no reset mechanism available\n");
-		return 0;
-	}
-
-	if (!devres_open_group(dev, ata_device_add, GFP_KERNEL))
-		return 0;
-
-	/* allocate host */
-	host = ata_host_alloc(dev, ent->n_ports);
-
-	host->irq = ent->irq;
-	host->irq2 = ent->irq2;
-	host->iomap = ent->iomap;
-	host->private_data = ent->private_data;
-	host->ops = ent->port_ops;
-	host->flags = ent->_host_flags;
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-
-		/* dummy? */
-		if (ent->dummy_port_mask & (1 << i)) {
-			ap->ops = &ata_dummy_port_ops;
-			continue;
-		}
-
-		if (ap->port_no == 1 && ent->pinfo2) {
-			ap->pio_mask = ent->pinfo2->pio_mask;
-			ap->mwdma_mask = ent->pinfo2->mwdma_mask;
-			ap->udma_mask = ent->pinfo2->udma_mask;
-			ap->flags |= ent->pinfo2->flags;
-			ap->ops = ent->pinfo2->port_ops;
-		} else {
-			ap->pio_mask = ent->pio_mask;
-			ap->mwdma_mask = ent->mwdma_mask;
-			ap->udma_mask = ent->udma_mask;
-			ap->flags |= ent->port_flags;
-			ap->ops = ent->port_ops;
-		}
-
-		memcpy(&ap->ioaddr, &ent->port[ap->port_no],
-		       sizeof(struct ata_ioports));
-	}
-
-	/* start and freeze ports before requesting IRQ */
-	rc = ata_host_start(host);
-	if (rc)
-		goto err_out;
-
-	/* obtain irq, that may be shared between channels */
-	rc = devm_request_irq(dev, ent->irq, ent->port_ops->irq_handler,
-			      ent->irq_flags, DRV_NAME, host);
-	if (rc) {
-		dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n",
-			   ent->irq, rc);
-		goto err_out;
-	}
-
-	/* do we have a second IRQ for the other channel, eg legacy mode */
-	if (ent->irq2) {
-		/* We will get weird core code crashes later if this is true
-		   so trap it now */
-		BUG_ON(ent->irq == ent->irq2);
-
-		rc = devm_request_irq(dev, ent->irq2,
-				ent->port_ops->irq_handler, ent->irq_flags,
-				DRV_NAME, host);
-		if (rc) {
-			dev_printk(KERN_ERR, dev, "irq %lu request failed: %d\n",
-				   ent->irq2, rc);
-			goto err_out;
-		}
-	}
-
-	/* resource acquisition complete */
-	devres_remove_group(dev, ata_device_add);
-
-	/* register */
-	rc = ata_host_register(host, ent->sht);
-	if (rc)
-		goto err_out;
-
-	VPRINTK("EXIT, returning %u\n", host->n_ports);
-	return host->n_ports; /* success */
-
- err_out:
-	devres_release_group(dev, ata_device_add);
-	VPRINTK("EXIT, returning 0\n");
-	return 0;
-}
-
 /**
  *	ata_port_detach - Detach ATA port in prepration of device removal
  *	@ap: ATA port to be detached
@@ -6332,32 +6207,6 @@ void ata_host_detach(struct ata_host *host)
 		ata_port_detach(host->ports[i]);
 }
 
-struct ata_probe_ent *
-ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
-{
-	struct ata_probe_ent *probe_ent;
-
-	probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL);
-	if (!probe_ent) {
-		printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
-		       kobject_name(&(dev->kobj)));
-		return NULL;
-	}
-
-	INIT_LIST_HEAD(&probe_ent->node);
-	probe_ent->dev = dev;
-
-	probe_ent->sht = port->sht;
-	probe_ent->port_flags = port->flags;
-	probe_ent->pio_mask = port->pio_mask;
-	probe_ent->mwdma_mask = port->mwdma_mask;
-	probe_ent->udma_mask = port->udma_mask;
-	probe_ent->port_ops = port->port_ops;
-	probe_ent->private_data = port->private_data;
-
-	return probe_ent;
-}
-
 /**
  *	ata_std_ports - initialize ioaddr with standard port offsets.
  *	@ioaddr: IO address structure to be initialized
@@ -6647,7 +6496,6 @@ EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
 EXPORT_SYMBOL_GPL(ata_host_start);
 EXPORT_SYMBOL_GPL(ata_host_register);
 EXPORT_SYMBOL_GPL(ata_host_activate);
-EXPORT_SYMBOL_GPL(ata_device_add);
 EXPORT_SYMBOL_GPL(ata_host_detach);
 EXPORT_SYMBOL_GPL(ata_sg_init);
 EXPORT_SYMBOL_GPL(ata_sg_init_one);
@@ -6730,7 +6578,6 @@ EXPORT_SYMBOL_GPL(ata_timing_merge);
 
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
 EXPORT_SYMBOL_GPL(ata_pci_init_native_host);
 EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 142120cab874..8af18ad1ca7f 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -532,101 +532,6 @@ static int ata_resources_present(struct pci_dev *pdev, int port)
 	return 1;
 }
 
-/**
- *	ata_pci_init_native_mode - Initialize native-mode driver
- *	@pdev:  pci device to be initialized
- *	@port:  array[2] of pointers to port info structures.
- *	@ports: bitmap of ports present
- *
- *	Utility function which allocates and initializes an
- *	ata_probe_ent structure for a standard dual-port
- *	PIO-based IDE controller.  The returned ata_probe_ent
- *	structure can be passed to ata_device_add().  The returned
- *	ata_probe_ent structure should then be freed with kfree().
- *
- *	The caller need only pass the address of the primary port, the
- *	secondary will be deduced automatically. If the device has non
- *	standard secondary port mappings this function can be called twice,
- *	once for each interface.
- */
-
-struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
-{
-	struct ata_probe_ent *probe_ent;
-	int i;
-	void __iomem * const *iomap;
-
-	/* Discard disabled ports.  Some controllers show their unused
-	 * channels this way.  Disabled ports will be made dummy.
-	 */
-	if (ata_resources_present(pdev, 0) == 0)
-		ports &= ~ATA_PORT_PRIMARY;
-	if (ata_resources_present(pdev, 1) == 0)
-		ports &= ~ATA_PORT_SECONDARY;
-
-	if (!ports) {
-		dev_printk(KERN_ERR, &pdev->dev, "no available port\n");
-		return NULL;
-	}
-
-	/* iomap BARs */
-	for (i = 0; i < 4; i++) {
-		if (!(ports & (1 << (i / 2))))
-			continue;
-		if (pcim_iomap(pdev, i, 0) == NULL) {
-			dev_printk(KERN_ERR, &pdev->dev,
-				   "failed to iomap PCI BAR %d\n", i);
-			return NULL;
-		}
-	}
-
-	pcim_iomap(pdev, 4, 0); /* may fail */
-	iomap = pcim_iomap_table(pdev);
-
-	/* alloc and init probe_ent */
-	probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
-	if (!probe_ent)
-		return NULL;
-
-	probe_ent->n_ports = 2;
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-
-	if (ports & ATA_PORT_PRIMARY) {
-		probe_ent->port[0].cmd_addr = iomap[0];
-		probe_ent->port[0].altstatus_addr =
-		probe_ent->port[0].ctl_addr = (void __iomem *)
-			((unsigned long)iomap[1] | ATA_PCI_CTL_OFS);
-		if (iomap[4]) {
-			if ((!(port[0]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-			    (ioread8(iomap[4] + 2) & 0x80))
-				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-			probe_ent->port[0].bmdma_addr = iomap[4];
-		}
-		ata_std_ports(&probe_ent->port[0]);
-	} else
-		probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY;
-
-	if (ports & ATA_PORT_SECONDARY) {
-		probe_ent->port[1].cmd_addr = iomap[2];
-		probe_ent->port[1].altstatus_addr =
-		probe_ent->port[1].ctl_addr = (void __iomem *)
-			((unsigned long)iomap[3] | ATA_PCI_CTL_OFS);
-		if (iomap[4]) {
-			if ((!(port[1]->flags & ATA_FLAG_IGN_SIMPLEX)) &&
-			    (ioread8(iomap[4] + 10) & 0x80))
-				probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
-			probe_ent->port[1].bmdma_addr = iomap[4] + 8;
-		}
-		ata_std_ports(&probe_ent->port[1]);
-		probe_ent->pinfo2 = port[1];
-	} else
-		probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY;
-
-	return probe_ent;
-}
-
 /**
  *	ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host
  *	@host: target ATA host
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index b4d5253d627a..5f4d40cd3288 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -93,8 +93,6 @@ extern int ata_flush_cache(struct ata_device *dev);
 extern void ata_dev_init(struct ata_device *dev);
 extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
-extern struct ata_probe_ent *ata_probe_ent_alloc(struct device *dev,
-						 const struct ata_port_info *port);
 extern struct ata_port *ata_port_alloc(struct ata_host *host);
 
 /* libata-acpi.c */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5d32c157de60..7c14a52079d5 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -368,34 +368,6 @@ struct ata_ioports {
 	void __iomem		*scr_addr;
 };
 
-struct ata_probe_ent {
-	struct list_head	node;
-	struct device 		*dev;
-	const struct ata_port_operations *port_ops;
-	struct scsi_host_template *sht;
-	struct ata_ioports	port[ATA_MAX_PORTS];
-	unsigned int		n_ports;
-	unsigned int		dummy_port_mask;
-	unsigned int		pio_mask;
-	unsigned int		mwdma_mask;
-	unsigned int		udma_mask;
-	unsigned long		irq;
-	unsigned long		irq2;
-	unsigned int		irq_flags;
-	unsigned long		port_flags;
-	unsigned long		_host_flags;
-	void __iomem * const	*iomap;
-	void			*private_data;
-
-	/* port_info for the secondary port.  Together with irq2, it's
-	 * used to implement non-uniform secondary port.  Currently,
-	 * the only user is ata_piix combined mode.  This workaround
-	 * will be removed together with ata_probe_ent when init model
-	 * is updated.
-	 */
-	const struct ata_port_info *pinfo2;
-};
-
 struct ata_host {
 	spinlock_t		lock;
 	struct device 		*dev;
@@ -744,7 +716,6 @@ extern int ata_host_register(struct ata_host *host,
 extern int ata_host_activate(struct ata_host *host, int irq,
 			     irq_handler_t irq_handler, unsigned long irq_flags,
 			     struct scsi_host_template *sht);
-extern int ata_device_add(const struct ata_probe_ent *ent);
 extern void ata_host_detach(struct ata_host *host);
 extern void ata_host_init(struct ata_host *, struct device *,
 			  unsigned long, const struct ata_port_operations *);
@@ -892,8 +863,6 @@ struct pci_bits {
 	unsigned long		val;
 };
 
-extern struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask);
 extern int ata_pci_init_native_host(struct ata_host *host,
 				    unsigned int port_mask);
 extern int ata_pci_prepare_native_host(struct pci_dev *pdev,

From 1e999736cafdffc374f22eed37b291129ef82e4e Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 11 Apr 2007 00:23:13 +0100
Subject: [PATCH 75/86] libata: HPA support

Signed-off-by: Alan Cox <alan@redhat.com>

Add support for ignoring the BIOS HPA result (off by default) and setting
the disk to the full available size unless already frozen.

Tested with various platforms/disks and confirmed to work with the
Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48
readback that Tejun fixed).

For normal users this brings us, I believe, to feature parity with old IDE
(and of course more featured in some areas too).
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 209 ++++++++++++++++++++++++++++++++++++++
 include/linux/ata.h       |   2 +
 include/linux/libata.h    |   1 +
 3 files changed, 212 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b5839f84b384..6d0a946afe84 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -89,6 +89,10 @@ int libata_fua = 0;
 module_param_named(fua, libata_fua, int, 0444);
 MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
 
+static int ata_ignore_hpa = 0;
+module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
+MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)");
+
 static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ;
 module_param(ata_probe_timeout, int, 0444);
 MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
@@ -808,6 +812,202 @@ void ata_id_c_string(const u16 *id, unsigned char *s,
 	*p = '\0';
 }
 
+static u64 ata_tf_to_lba48(struct ata_taskfile *tf)
+{
+	u64 sectors = 0;
+
+	sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
+	sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
+	sectors |= (tf->hob_lbal & 0xff) << 24;
+	sectors |= (tf->lbah & 0xff) << 16;
+	sectors |= (tf->lbam & 0xff) << 8;
+	sectors |= (tf->lbal & 0xff);
+
+	return ++sectors;
+}
+
+static u64 ata_tf_to_lba(struct ata_taskfile *tf)
+{
+	u64 sectors = 0;
+
+	sectors |= (tf->device & 0x0f) << 24;
+	sectors |= (tf->lbah & 0xff) << 16;
+	sectors |= (tf->lbam & 0xff) << 8;
+	sectors |= (tf->lbal & 0xff);
+
+	return ++sectors;
+}
+
+/**
+ *	ata_read_native_max_address_ext	-	LBA48 native max query
+ *	@dev: Device to query
+ *
+ *	Perform an LBA48 size query upon the device in question. Return the
+ *	actual LBA48 size or zero if the command fails.
+ */
+
+static u64 ata_read_native_max_address_ext(struct ata_device *dev)
+{
+	unsigned int err;
+	struct ata_taskfile tf;
+
+	ata_tf_init(dev, &tf);
+
+	tf.command = ATA_CMD_READ_NATIVE_MAX_EXT;
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR;
+	tf.protocol |= ATA_PROT_NODATA;
+	tf.device |= 0x40;
+
+	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err)
+		return 0;
+
+	return ata_tf_to_lba48(&tf);
+}
+
+/**
+ *	ata_read_native_max_address	-	LBA28 native max query
+ *	@dev: Device to query
+ *
+ *	Performa an LBA28 size query upon the device in question. Return the
+ *	actual LBA28 size or zero if the command fails.
+ */
+
+static u64 ata_read_native_max_address(struct ata_device *dev)
+{
+	unsigned int err;
+	struct ata_taskfile tf;
+
+	ata_tf_init(dev, &tf);
+
+	tf.command = ATA_CMD_READ_NATIVE_MAX;
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+	tf.protocol |= ATA_PROT_NODATA;
+	tf.device |= 0x40;
+
+	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err)
+		return 0;
+
+	return ata_tf_to_lba(&tf);
+}
+
+/**
+ *	ata_set_native_max_address_ext	-	LBA48 native max set
+ *	@dev: Device to query
+ *
+ *	Perform an LBA48 size set max upon the device in question. Return the
+ *	actual LBA48 size or zero if the command fails.
+ */
+
+static u64 ata_set_native_max_address_ext(struct ata_device *dev, u64 new_sectors)
+{
+	unsigned int err;
+	struct ata_taskfile tf;
+
+	new_sectors--;
+
+	ata_tf_init(dev, &tf);
+
+	tf.command = ATA_CMD_SET_MAX_EXT;
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR;
+	tf.protocol |= ATA_PROT_NODATA;
+	tf.device |= 0x40;
+
+	tf.lbal = (new_sectors >> 0) & 0xff;
+	tf.lbam = (new_sectors >> 8) & 0xff;
+	tf.lbah = (new_sectors >> 16) & 0xff;
+
+	tf.hob_lbal = (new_sectors >> 24) & 0xff;
+	tf.hob_lbam = (new_sectors >> 32) & 0xff;
+	tf.hob_lbah = (new_sectors >> 40) & 0xff;
+
+	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err)
+		return 0;
+
+	return ata_tf_to_lba48(&tf);
+}
+
+/**
+ *	ata_set_native_max_address	-	LBA28 native max set
+ *	@dev: Device to query
+ *
+ *	Perform an LBA28 size set max upon the device in question. Return the
+ *	actual LBA28 size or zero if the command fails.
+ */
+
+static u64 ata_set_native_max_address(struct ata_device *dev, u64 new_sectors)
+{
+	unsigned int err;
+	struct ata_taskfile tf;
+
+	new_sectors--;
+
+	ata_tf_init(dev, &tf);
+
+	tf.command = ATA_CMD_SET_MAX;
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+	tf.protocol |= ATA_PROT_NODATA;
+
+	tf.lbal = (new_sectors >> 0) & 0xff;
+	tf.lbam = (new_sectors >> 8) & 0xff;
+	tf.lbah = (new_sectors >> 16) & 0xff;
+	tf.device |= ((new_sectors >> 24) & 0x0f) | 0x40;
+
+	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+	if (err)
+		return 0;
+
+	return ata_tf_to_lba(&tf);
+}
+
+/**
+ *	ata_hpa_resize		-	Resize a device with an HPA set
+ *	@dev: Device to resize
+ *
+ *	Read the size of an LBA28 or LBA48 disk with HPA features and resize
+ *	it if required to the full size of the media. The caller must check
+ *	the drive has the HPA feature set enabled.
+ */
+
+static u64 ata_hpa_resize(struct ata_device *dev)
+{
+	u64 sectors = dev->n_sectors;
+	u64 hpa_sectors;
+	
+	if (ata_id_has_lba48(dev->id))
+		hpa_sectors = ata_read_native_max_address_ext(dev);
+	else
+		hpa_sectors = ata_read_native_max_address(dev);
+
+	/* if no hpa, both should be equal */
+	ata_dev_printk(dev, KERN_INFO, "%s 1: sectors = %lld, hpa_sectors = %lld\n",
+		__FUNCTION__, sectors, hpa_sectors);
+
+	if (hpa_sectors > sectors) {
+		ata_dev_printk(dev, KERN_INFO,
+			"Host Protected Area detected:\n"
+			"\tcurrent size: %lld sectors\n"
+			"\tnative size: %lld sectors\n",
+			sectors, hpa_sectors);
+
+		if (ata_ignore_hpa) {
+			if (ata_id_has_lba48(dev->id))
+				hpa_sectors = ata_set_native_max_address_ext(dev, hpa_sectors);
+			else
+				hpa_sectors = ata_set_native_max_address(dev, hpa_sectors);
+
+			if (hpa_sectors) {
+				ata_dev_printk(dev, KERN_INFO,
+					"native size increased to %lld sectors\n", hpa_sectors);
+				return hpa_sectors;
+			}
+		}
+	}
+	return sectors;
+}
+
 static u64 ata_id_n_sectors(const u16 *id)
 {
 	if (ata_id_has_lba(id)) {
@@ -1662,6 +1862,7 @@ int ata_dev_configure(struct ata_device *dev)
 			snprintf(revbuf, 7, "ATA-%d",  ata_id_major_version(id));
 
 		dev->n_sectors = ata_id_n_sectors(id);
+		dev->n_sectors_boot = dev->n_sectors;
 
 		/* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
 		ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
@@ -1688,6 +1889,9 @@ int ata_dev_configure(struct ata_device *dev)
 					dev->flags |= ATA_DFLAG_FLUSH_EXT;
 			}
 
+			if (ata_id_hpa_enabled(dev->id))
+				dev->n_sectors = ata_hpa_resize(dev);
+
 			/* config NCQ */
 			ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
 
@@ -3346,6 +3550,11 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
 			       "%llu != %llu\n",
 			       (unsigned long long)dev->n_sectors,
 			       (unsigned long long)new_n_sectors);
+		/* Are we the boot time size - if so we appear to be the
+		   same disk at this point and our HPA got reapplied */
+		if (ata_ignore_hpa && dev->n_sectors_boot == new_n_sectors 
+		    && ata_id_hpa_enabled(new_id))
+			return 1;
 		return 0;
 	}
 
diff --git a/include/linux/ata.h b/include/linux/ata.h
index ffb6cdc5010d..f4dc8dfeadc2 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -159,6 +159,8 @@ enum {
 	ATA_CMD_INIT_DEV_PARAMS	= 0x91,
 	ATA_CMD_READ_NATIVE_MAX	= 0xF8,
 	ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
+	ATA_CMD_SET_MAX		= 0xF9,
+	ATA_CMD_SET_MAX_EXT	= 0x37,
 	ATA_CMD_READ_LOG_EXT	= 0x2f,
 
 	/* READ_LOG_EXT pages */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 7c14a52079d5..73b86dd30aec 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -446,6 +446,7 @@ struct ata_device {
 	struct scsi_device	*sdev;		/* attached SCSI device */
 	/* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
 	u64			n_sectors;	/* size of device, if ATA */
+	u64			n_sectors_boot;	/* size of ATA device at startup */
 	unsigned int		class;		/* ATA_DEV_xxx */
 	u16			id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
 	u8			pio_mode;

From 169439c2e35f01e7832a9b4fc8a7446980c3d593 Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Tue, 17 Apr 2007 18:26:07 -0400
Subject: [PATCH 76/86] libata: Handle drives that require a spin-up command
 before first access

(S)ATA drives can be configured for "power-up in standby",
a mode whereby a specific "spin up now!" command is required
before the first media access.

Currently, a drive with this feature enabled can not be used at all
with libata, and once in this mode, the drive becomes a doorstop.

The older drivers/ide subsystem at least enumerates the drive,
so that it can be woken up after the fact from a userspace HDIO_*
command, but not libata.

This patch adds support to libata for the "power-up in standby"
mode where a "spin up now!" command (SET_FEATURES) is needed.
With this, libata will recognize such drives, spin them up,
and then re-IDENTIFY them if necessary to get a full/complete
set of drive features data.

Drives in this state are determined by looking for
special values in id[2], as documented in the current ATA specs.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 28 +++++++++++++++++++++++++++-
 include/linux/ata.h       |  2 ++
 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 6d0a946afe84..227399e48470 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1649,13 +1649,13 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	struct ata_taskfile tf;
 	unsigned int err_mask = 0;
 	const char *reason;
+	int tried_spinup = 0;
 	int rc;
 
 	if (ata_msg_ctl(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
 
 	ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
-
  retry:
 	ata_tf_init(dev, &tf);
 
@@ -1712,6 +1712,32 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 			goto err_out;
 	}
 
+	if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) {
+		tried_spinup = 1;
+		/*
+		 * Drive powered-up in standby mode, and requires a specific
+		 * SET_FEATURES spin-up subcommand before it will accept
+		 * anything other than the original IDENTIFY command.
+		 */
+		ata_tf_init(dev, &tf);
+		tf.command = ATA_CMD_SET_FEATURES;
+		tf.feature = SETFEATURES_SPINUP;
+		tf.protocol = ATA_PROT_NODATA;
+		tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+		err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
+		if (err_mask) {
+			rc = -EIO;
+			reason = "SPINUP failed";
+			goto err_out;
+		}
+		/*
+		 * If the drive initially returned incomplete IDENTIFY info,
+		 * we now must reissue the IDENTIFY command.
+		 */
+		if (id[2] == 0x37c8)
+			goto retry;
+	}
+
 	if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
 		/*
 		 * The exact sequence expected by certain pre-ATA4 drives is:
diff --git a/include/linux/ata.h b/include/linux/ata.h
index f4dc8dfeadc2..edb31bfff68f 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -202,6 +202,8 @@ enum {
 	SETFEATURES_WC_ON	= 0x02, /* Enable write cache */
 	SETFEATURES_WC_OFF	= 0x82, /* Disable write cache */
 
+	SETFEATURES_SPINUP	= 0x07, /* Spin-up drive */
+
 	/* ATAPI stuff */
 	ATAPI_PKT_DMA		= (1 << 0),
 	ATAPI_DMADIR		= (1 << 2),	/* ATAPI data dir:

From abcfa88bd47d433c796cf724a8a8b321a7190bdd Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 23 Apr 2007 02:04:38 +0900
Subject: [PATCH 77/86] pata_amd: remove contamination added during
 cable_detect conversion

This is added by added by cff63dfceb52c564fe1ba5394d50ab7d599a11b9
 - pata: cable methods.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_amd.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 5a77e4e60a42..536ee892ab72 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -639,11 +639,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (type == 1 && rev > 0x7)
 		type = 2;
 
-#if defined(CONFIG_ATA_ACPI)
-	/* Prefer the ACPI driver for Nvidia hardware */
-	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && ata_pata_acpi_present(pdev))
-		return -ENODEV;
-#endif
 	/* Check for AMD7411 */
 	if (type == 3)
 		/* FIFO is broken */

From c1c4e8d55757f8aec5f95eb80860e340d717c217 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 23 Apr 2007 02:05:53 +0900
Subject: [PATCH 78/86] libata: add missing call to ->cable_detect() in new EH
 path

->cable_detect() used to be called on by the old ata_bus_probe() path.
Add invocation to ata_eh_revalidate_and_attach() right after IDENTIFYs
are done.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-eh.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 0dbee550f9e8..67bf150fa66b 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1810,6 +1810,10 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
 		}
 	}
 
+	/* PDIAG- should have been released, ask cable type if post-reset */
+	if ((ehc->i.flags & ATA_EHI_DID_RESET) && ap->ops->cable_detect)
+		ap->cbl = ap->ops->cable_detect(ap);
+
 	/* Configure new devices forward such that user doesn't see
 	 * device detection messages backwards.
 	 */

From 4f701d1e9a796a3d6657e1129bee0566d7cda916 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Mon, 23 Apr 2007 11:55:36 +0100
Subject: [PATCH 79/86] ata_timing: ensure t->cycle is always correct

Russell King hit a case where quantisation errors accumulated such that
the cycle time was shorter than rather than equal to the active/recovery
time. The code already knows how to stretch times to fit the cycle time
but does not know about the reverse.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 227399e48470..4e1df5382b9a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2639,6 +2639,12 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
 		t->active += (t->cycle - (t->active + t->recover)) / 2;
 		t->recover = t->cycle - t->active;
 	}
+	
+	/* In a few cases quantisation may produce enough errors to
+	   leave t->cycle too low for the sum of active and recovery
+	   if so we must correct this */
+	if (t->active + t->recover > t->cycle)
+		t->cycle = t->active + t->recover;
 
 	return 0;
 }

From 1188c0d83ca010c3799711e85e63dbde122e6a90 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 23 Apr 2007 02:41:05 +0900
Subject: [PATCH 80/86] ahci: consolidate common port flags

Consolidate common port flags into AHCI_FLAG_COMMON.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/ahci.c | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7c61bc7ebd71..34c5534ed64c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -170,6 +170,10 @@ enum {
 	AHCI_FLAG_IGN_IRQ_IF_ERR	= (1 << 25), /* ignore IRQ_IF_ERR */
 	AHCI_FLAG_HONOR_PI		= (1 << 26), /* honor PORTS_IMPL */
 	AHCI_FLAG_IGN_SERR_INTERNAL	= (1 << 27), /* ignore SERR_INTERNAL */
+
+	AHCI_FLAG_COMMON		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+					  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+					  ATA_FLAG_SKIP_D2H_BSY,
 };
 
 struct ahci_cmd_hdr {
@@ -323,54 +327,41 @@ static const struct ata_port_operations ahci_vt8251_ops = {
 static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY,
+		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_ops,
 	},
 	/* board_ahci_pi */
 	{
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_HONOR_PI,
+		.flags		= AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_ops,
 	},
 	/* board_ahci_vt8251 */
 	{
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY |
-				  ATA_FLAG_HRST_TO_RESUME | AHCI_FLAG_NO_NCQ,
+		.flags		= AHCI_FLAG_COMMON | ATA_FLAG_HRST_TO_RESUME |
+				  AHCI_FLAG_NO_NCQ,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_vt8251_ops,
 	},
 	/* board_ahci_ign_iferr */
 	{
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY |
-				  AHCI_FLAG_IGN_IRQ_IF_ERR,
+		.flags		= AHCI_FLAG_COMMON | AHCI_FLAG_IGN_IRQ_IF_ERR,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_ops,
 	},
 	/* board_ahci_sb600 */
 	{
-		.sht		= &ahci_sht,
-		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_SKIP_D2H_BSY |
+		.flags		= AHCI_FLAG_COMMON |
 				  AHCI_FLAG_IGN_SERR_INTERNAL,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
 		.port_ops	= &ahci_ops,
 	},
-
 };
 
 static const struct pci_device_id ahci_pci_tbl[] = {

From 0d64a233fe6a8fd45a062fe125159854ffed60c7 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Mon, 23 Apr 2007 02:41:05 +0900
Subject: [PATCH 81/86] libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET
 and DID_HARDRESET

Separate ATA_EHI_DID_RESET into ATA_EHI_DID_SOFTRESET and
ATA_EHI_DID_HARDRESET.  ATA_EHI_DID_RESET is redefined as OR of the
two flags.  This patch doesn't introduce any behavior change.  This
will be used later to determine whether _SDD is necessary or not.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-eh.c |  5 ++++-
 include/linux/libata.h  | 10 ++++++----
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 67bf150fa66b..2bff9adcacf1 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1671,7 +1671,10 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
 				reset == softreset ? "soft" : "hard");
 
 	/* mark that this EH session started with reset */
-	ehc->i.flags |= ATA_EHI_DID_RESET;
+	if (reset == hardreset)
+		ehc->i.flags |= ATA_EHI_DID_HARDRESET;
+	else
+		ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
 
 	rc = ata_do_reset(ap, reset, classes);
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 73b86dd30aec..d8cfc72ea9c1 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -282,11 +282,13 @@ enum {
 	ATA_EHI_NO_AUTOPSY	= (1 << 2),  /* no autopsy */
 	ATA_EHI_QUIET		= (1 << 3),  /* be quiet */
 
-	ATA_EHI_DID_RESET	= (1 << 16), /* already reset this port */
-	ATA_EHI_PRINTINFO	= (1 << 17), /* print configuration info */
-	ATA_EHI_SETMODE		= (1 << 18), /* configure transfer mode */
-	ATA_EHI_POST_SETMODE	= (1 << 19), /* revaildating after setmode */
+	ATA_EHI_DID_SOFTRESET	= (1 << 16), /* already soft-reset this port */
+	ATA_EHI_DID_HARDRESET	= (1 << 17), /* already soft-reset this port */
+	ATA_EHI_PRINTINFO	= (1 << 18), /* print configuration info */
+	ATA_EHI_SETMODE		= (1 << 19), /* configure transfer mode */
+	ATA_EHI_POST_SETMODE	= (1 << 20), /* revaildating after setmode */
 
+	ATA_EHI_DID_RESET	= ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
 	ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,
 
 	/* max repeat if error condition is still set after ->error_handler */

From bd1d5ec64fff579e624b7c50c8a737da112efe5f Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 26 Apr 2007 00:19:21 -0700
Subject: [PATCH 82/86] ata: printk warning fixes

drivers/ata/libata-core.c: In function 'ata_hpa_resize':
drivers/ata/libata-core.c:986: warning: format '%lld' expects type 'long long int', but argument 5 has type 'u64'
drivers/ata/libata-core.c:986: warning: format '%lld' expects type 'long long int', but argument 6 has type 'u64'
drivers/ata/libata-core.c:990: warning: format '%lld' expects type 'long long int', but argument 4 has type 'u64'
drivers/ata/libata-core.c:990: warning: format '%lld' expects type 'long long int', but argument 5 has type 'u64'
drivers/ata/libata-core.c:1003: warning: format '%lld' expects type 'long long int', but argument 4 has type 'u64'

Also fix various 80-col bustage.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/libata-core.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4e1df5382b9a..ca67484af1eb 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -982,25 +982,28 @@ static u64 ata_hpa_resize(struct ata_device *dev)
 		hpa_sectors = ata_read_native_max_address(dev);
 
 	/* if no hpa, both should be equal */
-	ata_dev_printk(dev, KERN_INFO, "%s 1: sectors = %lld, hpa_sectors = %lld\n",
-		__FUNCTION__, sectors, hpa_sectors);
+	ata_dev_printk(dev, KERN_INFO, "%s 1: sectors = %lld, "
+				"hpa_sectors = %lld\n",
+		__FUNCTION__, (long long)sectors, (long long)hpa_sectors);
 
 	if (hpa_sectors > sectors) {
 		ata_dev_printk(dev, KERN_INFO,
 			"Host Protected Area detected:\n"
 			"\tcurrent size: %lld sectors\n"
 			"\tnative size: %lld sectors\n",
-			sectors, hpa_sectors);
+			(long long)sectors, (long long)hpa_sectors);
 
 		if (ata_ignore_hpa) {
 			if (ata_id_has_lba48(dev->id))
 				hpa_sectors = ata_set_native_max_address_ext(dev, hpa_sectors);
 			else
-				hpa_sectors = ata_set_native_max_address(dev, hpa_sectors);
+				hpa_sectors = ata_set_native_max_address(dev,
+								hpa_sectors);
 
 			if (hpa_sectors) {
-				ata_dev_printk(dev, KERN_INFO,
-					"native size increased to %lld sectors\n", hpa_sectors);
+				ata_dev_printk(dev, KERN_INFO, "native size "
+					"increased to %lld sectors\n",
+					(long long)hpa_sectors);
 				return hpa_sectors;
 			}
 		}

From 28e21c8c0d44cd63bad4c62f94ef0c5a1cb8402c Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 26 Apr 2007 00:19:25 -0700
Subject: [PATCH 83/86] pata_hpt3x2n: Add HPT371N support and other bits

Yes its no longer 3x2n but 3xxn, I can rename it if you want Jeff

- Don't reset both ports each time (Sergei)
- If we can't get a DPLL then abort entirely
- Use ioport access for clock (from drivers/ide)
- Add HPT371N support (from drivers/ide)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_hpt3x2n.c | 45 ++++++++++++++++++++++++++++++++------
 1 file changed, 38 insertions(+), 7 deletions(-)

diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 78323923143a..6a34521b9e01 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -8,10 +8,10 @@
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
+ * Portions Copyright (C) 2005-2006	MontaVista Software, Inc.
  *
  *
  * TODO
- *	371N
  *	Work out best PLL policy
  */
 
@@ -142,6 +142,7 @@ static int hpt3x2n_cable_detect(struct ata_port *ap)
 /**
  *	hpt3x2n_pre_reset	-	reset the hpt3x2n bus
  *	@ap: ATA port to reset
+ *	@deadline: deadline jiffies for the operation
  *
  *	Perform the initial reset handling for the 3x2n series controllers.
  *	Reset the hardware and state machine,
@@ -151,8 +152,7 @@ static int hpt3xn_pre_reset(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	/* Reset the state machine */
-	pci_write_config_byte(pdev, 0x50, 0x37);
-	pci_write_config_byte(pdev, 0x54, 0x37);
+	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
 	return ata_std_prereset(ap);
 }
@@ -433,8 +433,9 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
 {
 	unsigned long freq;
 	u32 fcnt;
+	unsigned long iobase = pci_resource_start(pdev, 4);
 
-	pci_read_config_dword(pdev, 0x70/*CHECKME*/, &fcnt);
+	fcnt = inl(iobase + 0x90);	/* Not PCI readable for some chips */
 	if ((fcnt >> 12) != 0xABCDE) {
 		printk(KERN_WARNING "hpt3xn: BIOS clock data not set.\n");
 		return 33;	/* Not BIOS set */
@@ -503,6 +504,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	unsigned int pci_mhz;
 	unsigned int f_low, f_high;
 	int adjust;
+	unsigned long iobase = pci_resource_start(dev, 4);
 
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
 	class_rev &= 0xFF;
@@ -512,6 +514,11 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			if (class_rev < 6)
 				return -ENODEV;
 			break;
+		case PCI_DEVICE_ID_TTI_HPT371:
+			if (class_rev < 2)
+				return -ENODEV;
+			/* 371N if rev > 1 */
+			break;
 		case PCI_DEVICE_ID_TTI_HPT372:
 			/* 372N if rev >= 1*/
 			if (class_rev == 0)
@@ -539,6 +546,19 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	irqmask &= ~0x10;
 	pci_write_config_byte(dev, 0x5a, irqmask);
 
+	/*
+	 * HPT371 chips physically have only one channel, the secondary one,
+	 * but the primary channel registers do exist!  Go figure...
+	 * So,  we manually disable the non-existing channel here
+	 * (if the BIOS hasn't done this already).
+	 */
+	if (dev->device == PCI_DEVICE_ID_TTI_HPT371) {
+		u8 mcr1;
+		pci_read_config_byte(dev, 0x50, &mcr1);
+		mcr1 &= ~0x04;
+		pci_write_config_byte(dev, 0x50, mcr1);
+	}
+
 	/* Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or
 	   50 for UDMA100. Right now we always use 66 */
 
@@ -557,14 +577,24 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			break;
 		pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
 	}
-	if (adjust == 8)
-		printk(KERN_WARNING "hpt3xn: DPLL did not stabilize.\n");
+	if (adjust == 8) {
+		printk(KERN_WARNING "hpt3x2n: DPLL did not stabilize.\n");
+		return -ENODEV;
+	}
 
 	/* Set our private data up. We only need a few flags so we use
 	   it directly */
 	port->private_data = NULL;
-	if (pci_mhz > 60)
+	if (pci_mhz > 60) {
 		port->private_data = (void *)PCI66;
+		/*
+		 * On  HPT371N, if ATA clock is 66 MHz we must set bit 2 in
+		 * the MISC. register to stretch the UltraDMA Tss timing.
+		 * NOTE: This register is only writeable via I/O space.
+		 */
+		if (dev->device == PCI_DEVICE_ID_TTI_HPT371)
+			outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
+	}
 
 	/* Now kick off ATA set up */
 	port_info[0] = port_info[1] = port;
@@ -573,6 +603,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
 static const struct pci_device_id hpt3x2n[] = {
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
+	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT371), },
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), },
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), },
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372N), },

From a473446856374668c4296db5256ca708ce8f7095 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Thu, 26 Apr 2007 00:19:25 -0700
Subject: [PATCH 84/86] pata_hpt37x: Further small fixes

Further HPT37x changes

- No 66MHz 370/370A
- Remove dead special case check now we use the DPLL (as per the IDE driver)

Pointed out by Sergei

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_hpt37x.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index fe1b482d5291..41d831296347 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.6.4"
+#define DRV_VERSION	"0.6.5"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -130,7 +130,7 @@ static const struct hpt_chip hpt370 = {
 		hpt37x_timings_33,
 		NULL,
 		NULL,
-		hpt37x_timings_66
+		NULL
 	}
 };
 
@@ -141,7 +141,7 @@ static const struct hpt_chip hpt370a = {
 		hpt37x_timings_33,
 		NULL,
 		hpt37x_timings_50,
-		hpt37x_timings_66
+		NULL
 	}
 };
 
@@ -1018,8 +1018,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 					return -ENODEV;
 				port = &info_hpt372;
 				chip_table = &hpt371;
-				/* Single channel device, paster is not present
-				   but the NIOS (or us for non x86) must mark it
+				/* Single channel device, master is not present
+				   but the BIOS (or us for non x86) must mark it
 				   absent */
 				pci_read_config_byte(dev, 0x50, &mcr1);
 				mcr1 &= ~0x04;
@@ -1131,16 +1131,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	} else {
 		port->private_data = (void *)chip_table->clocks[clock_slot];
 		/*
-		 *	Perform a final fixup. The 371 and 372 clock determines
-		 *	if UDMA133 is available. (FIXME: should we use DPLL then ?)
-		 */
+		 *	Perform a final fixup. Note that we will have used the
+		 *	DPLL on the HPT372 which means we don't have to worry
+		 *	about lack of UDMA133 support on lower clocks
+ 		 */
 
-		if (clock_slot == 2 && chip_table == &hpt372) {	/* 50Mhz */
-			printk(KERN_WARNING "pata_hpt37x: No UDMA133 support available with 50MHz bus clock.\n");
-			if (port == &info_hpt372)
-				port = &info_hpt372_50;
-			else BUG();
-		}
 		if (clock_slot < 2 && port == &info_hpt370)
 			port = &info_hpt370_33;
 		if (clock_slot < 2 && port == &info_hpt370a)

From 4b22afd743a3882123a16135fa863558c0ac2d94 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 26 Apr 2007 00:19:26 -0700
Subject: [PATCH 85/86] drivers/ata/pata_cmd640.c: fix build with CONFIG_PM=n

This is grubby, but all the ata drivers do it this way.

Would it not be better to do

#define ata_scsi_device_resume NULL

in libata.h, remove all those ifdefs?

(updated version, ug, ug)

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_cmd640.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index ab9468d16edb..2105985a8013 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -181,8 +181,10 @@ static struct scsi_host_template cmd640_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
 	.resume			= ata_scsi_device_resume,
 	.suspend		= ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations cmd640_port_ops = {
@@ -267,7 +269,11 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 static int cmd640_reinit_one(struct pci_dev *pdev)
 {
 	cmd640_hardware_init(pdev);
+#ifdef CONFIG_PM
 	return ata_pci_device_resume(pdev);
+#else
+	return 0;
+#endif
 }
 
 static const struct pci_device_id cmd640[] = {
@@ -280,7 +286,9 @@ static struct pci_driver cmd640_pci_driver = {
 	.id_table	= cmd640,
 	.probe 		= cmd640_init_one,
 	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
 	.suspend	= ata_pci_device_suspend,
+#endif
 	.resume		= cmd640_reinit_one,
 };
 

From 225036314e768bbfe8331ea9b0e91ca101afe427 Mon Sep 17 00:00:00 2001
From: Milind Arun Choudhary <milindchoudhary@gmail.com>
Date: Thu, 26 Apr 2007 00:19:27 -0700
Subject: [PATCH 86/86] SPIN_LOCK_UNLOCKED cleanup in
 drivers/ata/pata_winbond.c

remove SPIN_LOCK_UNLOCKED, use DEFINE_SPINLOCK instead

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/ata/pata_winbond.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index aa6d4bca2ea3..cc4ad271afb5 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -35,7 +35,7 @@ static int probe_winbond = 1;
 static int probe_winbond;
 #endif
 
-static spinlock_t winbond_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(winbond_lock);
 
 static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
 {