diff --git a/Documentation/devicetree/bindings/display/panel/jdi,tx26d202vm0bwa.txt b/Documentation/devicetree/bindings/display/panel/jdi,tx26d202vm0bwa.txt
new file mode 100644
index 000000000000..b245b4d68d0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,tx26d202vm0bwa.txt
@@ -0,0 +1,9 @@
+Japan Display Inc. 10.1" WUXGA (1920x1200) TFT LCD panel
+
+The panel has dual LVDS channels.
+
+Required properties:
+- compatible: should be "jdi,tx26d202vm0bwa"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-raydium-rm67191.c b/drivers/gpu/drm/panel/panel-raydium-rm67191.c
index 6a5d37006103..0ef48335af95 100644
--- a/drivers/gpu/drm/panel/panel-raydium-rm67191.c
+++ b/drivers/gpu/drm/panel/panel-raydium-rm67191.c
@@ -555,8 +555,7 @@ static int rad_panel_probe(struct mipi_dsi_device *dsi)
 	panel->dsi = dsi;
 
 	dsi->format = MIPI_DSI_FMT_RGB888;
-	dsi->mode_flags =  MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO |
-			   MIPI_DSI_CLOCK_NON_CONTINUOUS;
+	dsi->mode_flags =  MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO;
 
 	ret = of_property_read_u32(np, "video-mode", &video_mode);
 	if (!ret) {
@@ -585,8 +584,11 @@ static int rad_panel_probe(struct mipi_dsi_device *dsi)
 	}
 
 	panel->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(panel->reset))
-		return PTR_ERR(panel->reset);
+	if (IS_ERR(panel->reset)) {
+		ret = PTR_ERR(panel->reset);
+		dev_err(dev, "Failed to get reset gpio (%d)\n", ret);
+		return ret;
+	}
 
 	memset(&bl_props, 0, sizeof(bl_props));
 	bl_props.type = BACKLIGHT_RAW;
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 28fa6ba7b767..8632df827c96 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1824,6 +1824,42 @@ static const struct panel_desc innolux_zj070na_01p = {
 	},
 };
 
+static const struct display_timing jdi_tx26d202vm0bwa_timing = {
+	.pixelclock = { 151820000, 156720000, 159780000 },
+	.hactive = { 1920, 1920, 1920 },
+	.hfront_porch = { 76, 100, 112 },
+	.hback_porch = { 74, 100, 112 },
+	.hsync_len = { 30, 30, 30 },
+	.vactive = { 1200, 1200, 1200},
+	.vfront_porch = { 3, 5, 10 },
+	.vback_porch = { 2, 5, 10 },
+	.vsync_len = { 5, 5, 5 },
+	.flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc jdi_tx26d202vm0bwa = {
+	.timings = &jdi_tx26d202vm0bwa_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 217,
+		.height = 136,
+	},
+	.delay = {
+		/*
+		 * The panel spec recommends one second delay
+		 * to the below items.  However, it's a bit too
+		 * long in pratice.  Based on tests, it turns
+		 * out 100 milliseconds is fine.
+		 */
+		.prepare = 100,
+		.enable = 100,
+		.unprepare = 100,
+		.disable = 100,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+};
+
 static const struct display_timing koe_tx14d24vm1bpa_timing = {
 	.pixelclock = { 5580000, 5850000, 6200000 },
 	.hactive = { 320, 320, 320 },
@@ -3237,6 +3273,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "innolux,zj070na-01p",
 		.data = &innolux_zj070na_01p,
+	}, {
+		.compatible = "jdi,tx26d202vm0bwa",
+		.data = &jdi_tx26d202vm0bwa,
 	}, {
 		.compatible = "koe,tx14d24vm1bpa",
 		.data = &koe_tx14d24vm1bpa,