MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: use "ref" for reference clock name
Current ath79 clock.c code does not read reference clock and pll setup from devicetree. The ar724x_clocks_init() function recreates the clocks from scratch so devicetree clock information is dropped. After adding the code which picked up reference clock from devicetree I have found that kernel does not boot anymore. The SPI and UART drivers can't get clk; here are the bootlog error messages: of_serial: probe of 18020000.uart failed with error -22 ath79-spi: probe of 1f000000.spi failed with error -22 The problem is that clock code assumes that reference clock name is "ref" but current dts-file uses another name: "oscillator". This patch fixes the problem by changing external oscillator dt node name to "ref". Please note that there is an alternative solution for the problem: > --- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts > +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts > @@ -16,6 +16,7 @@ > > extosc: oscillator { > compatible = "fixed-clock"; > + clock-output-names = "ref"; > #clock-cells = <0>; > clock-frequency = <40000000>; > }; Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12874/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
parent
f4c87b7a94
commit
f7f797cfc6
|
@ -18,7 +18,7 @@
|
|||
reg = <0x0 0x2000000>;
|
||||
};
|
||||
|
||||
extosc: oscillator {
|
||||
extosc: ref {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <40000000>;
|
||||
|
|
Loading…
Reference in a new issue