Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add new Bamboo PT (0xdb)
  Input: add input driver for polled GPIO buttons
  Input: turbografx - fix reference counting
  Input: synaptics - fix handling of 2-button ClickPads
  Input: wacom - add IDs for two new Bamboo PTs
  Input: document struct input_absinfo
  Input: add keycodes for touchpad on/off keys
  Input: usbtouchscreen - add support for LG Flatron T1710B
This commit is contained in:
Linus Torvalds 2010-12-08 06:34:02 -08:00
commit f8f5d4f11d
9 changed files with 317 additions and 2 deletions

View file

@ -245,6 +245,7 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
goto err_free_tgfx;
}
parport_put_port(pp);
return tgfx;
err_free_dev:

View file

@ -179,6 +179,22 @@ config KEYBOARD_GPIO
To compile this driver as a module, choose M here: the
module will be called gpio_keys.
config KEYBOARD_GPIO_POLLED
tristate "Polled GPIO buttons"
depends on GENERIC_GPIO
select INPUT_POLLDEV
help
This driver implements support for buttons connected
to GPIO pins that are not capable of generating interrupts.
Say Y here if your device has buttons connected
directly to such GPIO pins. Your board-specific
setup logic must also provide a platform device,
with configuration data saying which GPIOs are used.
To compile this driver as a module, choose M here: the
module will be called gpio_keys_polled.
config KEYBOARD_TCA6416
tristate "TCA6416 Keypad Support"
depends on I2C

View file

@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o
obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o

View file

@ -0,0 +1,261 @@
/*
* Driver for buttons on GPIO lines not capable of generating interrupts
*
* Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
*
* This file was based on: /drivers/input/misc/cobalt_btns.c
* Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* also was based on: /drivers/input/keyboard/gpio_keys.c
* Copyright 2005 Phil Blundell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input-polldev.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#define DRV_NAME "gpio-keys-polled"
struct gpio_keys_button_data {
int last_state;
int count;
int threshold;
int can_sleep;
};
struct gpio_keys_polled_dev {
struct input_polled_dev *poll_dev;
struct device *dev;
struct gpio_keys_platform_data *pdata;
struct gpio_keys_button_data data[0];
};
static void gpio_keys_polled_check_state(struct input_dev *input,
struct gpio_keys_button *button,
struct gpio_keys_button_data *bdata)
{
int state;
if (bdata->can_sleep)
state = !!gpio_get_value_cansleep(button->gpio);
else
state = !!gpio_get_value(button->gpio);
if (state != bdata->last_state) {
unsigned int type = button->type ?: EV_KEY;
input_event(input, type, button->code,
!!(state ^ button->active_low));
input_sync(input);
bdata->count = 0;
bdata->last_state = state;
}
}
static void gpio_keys_polled_poll(struct input_polled_dev *dev)
{
struct gpio_keys_polled_dev *bdev = dev->private;
struct gpio_keys_platform_data *pdata = bdev->pdata;
struct input_dev *input = dev->input;
int i;
for (i = 0; i < bdev->pdata->nbuttons; i++) {
struct gpio_keys_button_data *bdata = &bdev->data[i];
if (bdata->count < bdata->threshold)
bdata->count++;
else
gpio_keys_polled_check_state(input, &pdata->buttons[i],
bdata);
}
}
static void gpio_keys_polled_open(struct input_polled_dev *dev)
{
struct gpio_keys_polled_dev *bdev = dev->private;
struct gpio_keys_platform_data *pdata = bdev->pdata;
if (pdata->enable)
pdata->enable(bdev->dev);
}
static void gpio_keys_polled_close(struct input_polled_dev *dev)
{
struct gpio_keys_polled_dev *bdev = dev->private;
struct gpio_keys_platform_data *pdata = bdev->pdata;
if (pdata->disable)
pdata->disable(bdev->dev);
}
static int __devinit gpio_keys_polled_probe(struct platform_device *pdev)
{
struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
struct gpio_keys_polled_dev *bdev;
struct input_polled_dev *poll_dev;
struct input_dev *input;
int error;
int i;
if (!pdata || !pdata->poll_interval)
return -EINVAL;
bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) +
pdata->nbuttons * sizeof(struct gpio_keys_button_data),
GFP_KERNEL);
if (!bdev) {
dev_err(dev, "no memory for private data\n");
return -ENOMEM;
}
poll_dev = input_allocate_polled_device();
if (!poll_dev) {
dev_err(dev, "no memory for polled device\n");
error = -ENOMEM;
goto err_free_bdev;
}
poll_dev->private = bdev;
poll_dev->poll = gpio_keys_polled_poll;
poll_dev->poll_interval = pdata->poll_interval;
poll_dev->open = gpio_keys_polled_open;
poll_dev->close = gpio_keys_polled_close;
input = poll_dev->input;
input->evbit[0] = BIT(EV_KEY);
input->name = pdev->name;
input->phys = DRV_NAME"/input0";
input->dev.parent = &pdev->dev;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_keys_button_data *bdata = &bdev->data[i];
unsigned int gpio = button->gpio;
unsigned int type = button->type ?: EV_KEY;
if (button->wakeup) {
dev_err(dev, DRV_NAME " does not support wakeup\n");
error = -EINVAL;
goto err_free_gpio;
}
error = gpio_request(gpio,
button->desc ? button->desc : DRV_NAME);
if (error) {
dev_err(dev, "unable to claim gpio %u, err=%d\n",
gpio, error);
goto err_free_gpio;
}
error = gpio_direction_input(gpio);
if (error) {
dev_err(dev,
"unable to set direction on gpio %u, err=%d\n",
gpio, error);
goto err_free_gpio;
}
bdata->can_sleep = gpio_cansleep(gpio);
bdata->last_state = -1;
bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
pdata->poll_interval);
input_set_capability(input, type, button->code);
}
bdev->poll_dev = poll_dev;
bdev->dev = dev;
bdev->pdata = pdata;
platform_set_drvdata(pdev, bdev);
error = input_register_polled_device(poll_dev);
if (error) {
dev_err(dev, "unable to register polled device, err=%d\n",
error);
goto err_free_gpio;
}
/* report initial state of the buttons */
for (i = 0; i < pdata->nbuttons; i++)
gpio_keys_polled_check_state(input, &pdata->buttons[i],
&bdev->data[i]);
return 0;
err_free_gpio:
while (--i >= 0)
gpio_free(pdata->buttons[i].gpio);
input_free_polled_device(poll_dev);
err_free_bdev:
kfree(bdev);
platform_set_drvdata(pdev, NULL);
return error;
}
static int __devexit gpio_keys_polled_remove(struct platform_device *pdev)
{
struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev);
struct gpio_keys_platform_data *pdata = bdev->pdata;
int i;
input_unregister_polled_device(bdev->poll_dev);
for (i = 0; i < pdata->nbuttons; i++)
gpio_free(pdata->buttons[i].gpio);
input_free_polled_device(bdev->poll_dev);
kfree(bdev);
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver gpio_keys_polled_driver = {
.probe = gpio_keys_polled_probe,
.remove = __devexit_p(gpio_keys_polled_remove),
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
static int __init gpio_keys_polled_init(void)
{
return platform_driver_register(&gpio_keys_polled_driver);
}
static void __exit gpio_keys_polled_exit(void)
{
platform_driver_unregister(&gpio_keys_polled_driver);
}
module_init(gpio_keys_polled_init);
module_exit(gpio_keys_polled_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
MODULE_DESCRIPTION("Polled GPIO Buttons driver");
MODULE_ALIAS("platform:" DRV_NAME);

View file

@ -51,7 +51,8 @@
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100)
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000)
/* synaptics modes query bits */

View file

@ -1436,6 +1436,12 @@ static struct wacom_features wacom_features_0xD2 =
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD8 =
{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xDA =
{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xDB =
{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
#define USB_DEVICE_WACOM(prod) \
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
@ -1504,6 +1510,9 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
{ USB_DEVICE_WACOM(0xD8) },
{ USB_DEVICE_WACOM(0xDA) },
{ USB_DEVICE_WACOM(0xDB) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },

View file

@ -178,6 +178,7 @@ static const struct usb_device_id usbtouch_devices[] = {
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
{USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO

View file

@ -16,6 +16,8 @@ struct gpio_keys_button {
struct gpio_keys_platform_data {
struct gpio_keys_button *buttons;
int nbuttons;
unsigned int poll_interval; /* polling interval in msecs -
for polling driver only */
unsigned int rep:1; /* enable input subsystem auto repeat */
int (*enable)(struct device *dev);
void (*disable)(struct device *dev);

View file

@ -47,6 +47,25 @@ struct input_id {
__u16 version;
};
/**
* struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
* @value: latest reported value for the axis.
* @minimum: specifies minimum value for the axis.
* @maximum: specifies maximum value for the axis.
* @fuzz: specifies fuzz value that is used to filter noise from
* the event stream.
* @flat: values that are within this value will be discarded by
* joydev interface and reported as 0 instead.
* @resolution: specifies resolution for the values reported for
* the axis.
*
* Note that input core does not clamp reported values to the
* [minimum, maximum] limits, such task is left to userspace.
*
* Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
* units per millimeter (units/mm), resolution for rotational axes
* (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
*/
struct input_absinfo {
__s32 value;
__s32 minimum;
@ -624,6 +643,10 @@ struct input_keymap_entry {
#define KEY_CAMERA_FOCUS 0x210
#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
#define KEY_TOUCHPAD_ON 0x213
#define KEY_TOUCHPAD_OFF 0x214
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
@ -1130,7 +1153,7 @@ struct input_mt_slot {
* of tracked contacts
* @mtsize: number of MT slots the device uses
* @slot: MT slot currently being transmitted
* @absinfo: array of &struct absinfo elements holding information
* @absinfo: array of &struct input_absinfo elements holding information
* about absolute axes (current value, min, max, flat, fuzz,
* resolution)
* @key: reflects current state of device's keys/buttons