1
0
Fork 0

V4L/DVB (3546): Fix Compilation after moving bttv code

- Missing a Makefile for bt8xx
- rds.h were at wrong directory, since it is a global header for an internal
  interface
- tda7432 and tda9875 were dependent from bttv.h
- bttv.h were holding i2c addresses

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
hifive-unleashed-5.1
Mauro Carvalho Chehab 2006-03-23 21:45:24 -03:00
parent c72602b825
commit fa3fcceb30
9 changed files with 49 additions and 29 deletions

View File

@ -0,0 +1,12 @@
#
# Makefile for the video capture/playback device drivers.
#
bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \
bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \
bttv-input.o
obj-$(CONFIG_VIDEO_BT848) += bttv.o
EXTRA_CFLAGS += -I$(src)/..
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core

View File

@ -42,7 +42,7 @@
#include <asm/io.h>
#include <asm/byteorder.h>
#include "rds.h"
#include <media/rds.h>
unsigned int bttv_num; /* number of Bt848s in use */

View File

@ -18,6 +18,7 @@
#include <linux/i2c.h>
#include <media/ir-common.h>
#include <media/ir-kbd-i2c.h>
#include <media/i2c-addr.h>
/* ---------------------------------------------------------- */
/* exported by bttv-cards.c */
@ -168,25 +169,6 @@
#define BTTV_BOARD_HAUPPAUGE_IMPACTVCB 0x8f
#define BTTV_BOARD_MACHTV_MAGICTV 0x90
/* i2c address list */
#define I2C_TSA5522 0xc2
#define I2C_TDA7432 0x8a
#define I2C_BT832_ALT1 0x88
#define I2C_BT832_ALT2 0x8a // alternate setting
#define I2C_TDA8425 0x82
#define I2C_TDA9840 0x84
#define I2C_TDA9850 0xb6 /* also used by 9855,9873 */
#define I2C_TDA9874 0xb0 /* also used by 9875 */
#define I2C_TDA9875 0xb0
#define I2C_HAUPEE 0xa0
#define I2C_STBEE 0xae
#define I2C_VHX 0xc0
#define I2C_MSP3400 0x80
#define I2C_MSP3400_ALT 0x88
#define I2C_TEA6300 0x80 /* also used by 6320 */
#define I2C_DPL3518 0x84
#define I2C_TDA9887 0x86
/* more card-specific defines */
#define PT2254_L_CHANNEL 0x10
#define PT2254_R_CHANNEL 0x08

View File

@ -32,7 +32,7 @@
#include <asm/uaccess.h>
#include "rds.h"
#include <media/rds.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = {

View File

@ -960,7 +960,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
if (saa7134_no_overlay <= 0) {
saa7134_video_template.type |= VID_TYPE_OVERLAY;
} else {
printk("bttv: Overlay support disabled.\n");
printk("%s: Overlay support disabled.\n",dev->name);
}
dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,

View File

@ -48,9 +48,9 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include "bttv.h"
#include <media/audiochip.h>
#include <media/v4l2-common.h>
#include <media/i2c-addr.h>
#ifndef VIDEO_AUDIO_BALANCE
# define VIDEO_AUDIO_BALANCE 32

View File

@ -30,14 +30,14 @@
#include <linux/i2c-algo-bit.h>
#include <linux/init.h>
#include "bttv.h"
#include <media/audiochip.h>
#include <media/i2c-addr.h>
static int debug; /* insmod parameter */
module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_LICENSE("GPL");
/* Addresses to scan */
static unsigned short normal_i2c[] = {
I2C_TDA9875 >> 1,

View File

@ -0,0 +1,30 @@
/*
* V4L I2C address list
*
*
* Copyright (C) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
* Based on a previous mapping by
* Ralph Metzler (rjkm@thp.uni-koeln.de)
* Gerd Knorr <kraxel@goldbach.in-berlin.de>
*
*/
/* bttv address list */
#define I2C_TSA5522 0xc2
#define I2C_TDA7432 0x8a
#define I2C_BT832_ALT1 0x88
#define I2C_BT832_ALT2 0x8a // alternate setting
#define I2C_TDA8425 0x82
#define I2C_TDA9840 0x84
#define I2C_TDA9850 0xb6 /* also used by 9855,9873 */
#define I2C_TDA9874 0xb0 /* also used by 9875 */
#define I2C_TDA9875 0xb0
#define I2C_HAUPEE 0xa0
#define I2C_STBEE 0xae
#define I2C_VHX 0xc0
#define I2C_MSP3400 0x80
#define I2C_MSP3400_ALT 0x88
#define I2C_TEA6300 0x80 /* also used by 6320 */
#define I2C_DPL3518 0x84
#define I2C_TDA9887 0x86

View File

@ -42,7 +42,3 @@ struct rds_command {
#define RDS_CMD_POLL _IOR('R',4,int)
#endif