Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: use a less common define name in BF549 Blackfin arch: Add missing definitions for BF561 Blackfin arch: reclaim a few bytes from the end of our init section Blackfin arch: fix libata data struct member from irq_type to irq_flags Blackfin arch: Do not pollute name space used in linux-2.6.x/sound Blackfin arch: Fix bug set correct baud for spi mmc and enable SPI after DMA. Blackfin arch: update board defconfig files according to latest information from ADI datasheet Blackfin arch: ensure that speculative loads of bad pointers don't cause us to do bad things. Blackfin arch: Add missing definitions of BF54x Blackfin arch: Fix random crash issue found by Michael. Blackfin arch: fix bug: tell users if the kernel is recovering from a fault condition Blackfin arch: add support for checking/clearing overruns in generic purpose Timer API Blackfin arch: cleanup arch/blackfin/kernel/traps.c handling code. Blackfin arch: Apply Bluetchnix vendor patch provided by Harald Krapfenbauer Blackfin arch: fix bug BlueTechnix CM-BF537 board config uses wrong IRQ for net2272 driver Blackfin arch: fix bug: kernel prints out error message twice Blackfin arch: add NFC driver support in BF527-EZKIT board Blackfin arch: Added support for HV Sistemas H8606 board
This commit is contained in:
commit
fb7267acfe
|
@ -295,6 +295,12 @@ config PNAV10
|
|||
help
|
||||
PNAV 1.0 board Support.
|
||||
|
||||
config H8606_HVSISTEMAS
|
||||
bool "HV Sistemas H8606"
|
||||
depends on (BF532)
|
||||
help
|
||||
HV Sistemas H8606 board support.
|
||||
|
||||
config GENERIC_BOARD
|
||||
bool "Custom"
|
||||
depends on (BF537 || BF536 \
|
||||
|
@ -317,7 +323,8 @@ config MEM_MT48LC64M4A2FB_7E
|
|||
config MEM_MT48LC16M16A2TG_75
|
||||
bool
|
||||
depends on (BFIN533_EZKIT || BFIN561_EZKIT \
|
||||
|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM)
|
||||
|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
|
||||
|| H8606_HVSISTEMAS)
|
||||
default y
|
||||
|
||||
config MEM_MT48LC32M8A2_75
|
||||
|
@ -366,7 +373,7 @@ config CLKIN_HZ
|
|||
int "Crystal Frequency in Hz"
|
||||
default "11059200" if BFIN533_STAMP
|
||||
default "27000000" if BFIN533_EZKIT
|
||||
default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT)
|
||||
default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
|
||||
default "30000000" if BFIN561_EZKIT
|
||||
default "24576000" if PNAV10
|
||||
help
|
||||
|
@ -404,6 +411,7 @@ config VCO_MULT
|
|||
default "20" if BFIN537_BLUETECHNIX_CM
|
||||
default "20" if BFIN561_BLUETECHNIX_CM
|
||||
default "20" if BFIN561_EZKIT
|
||||
default "16" if H8606_HVSISTEMAS
|
||||
help
|
||||
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
|
||||
PLL Frequency = (Crystal Frequency) * (this setting)
|
||||
|
@ -440,6 +448,7 @@ config SCLK_DIV
|
|||
default 4 if BFIN537_BLUETECHNIX_CM
|
||||
default 4 if BFIN561_BLUETECHNIX_CM
|
||||
default 5 if BFIN561_EZKIT
|
||||
default 3 if H8606_HVSISTEMAS
|
||||
help
|
||||
This sets the frequency of the system clock (including SDRAM or DDR).
|
||||
This can be between 1 and 15
|
||||
|
@ -492,11 +501,13 @@ config MEM_SIZE
|
|||
default 64 if BFIN561_EZKIT
|
||||
default 128 if BFIN533_STAMP
|
||||
default 64 if PNAV10
|
||||
default 32 if H8606_HVSISTEMAS
|
||||
|
||||
config MEM_ADD_WIDTH
|
||||
int "SDRAM Memory Address Width"
|
||||
default 9 if BFIN533_EZKIT
|
||||
default 9 if BFIN561_EZKIT
|
||||
default 9 if H8606_HVSISTEMAS
|
||||
default 10 if BFIN527_EZKIT
|
||||
default 10 if BFIN537_STAMP
|
||||
default 11 if BFIN533_STAMP
|
||||
|
|
|
@ -244,7 +244,7 @@ CONFIG_CLKIN_HZ=25000000
|
|||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_VCO_HZ=600000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
CONFIG_MIN_SCLK_HZ=27000000
|
||||
|
||||
#
|
||||
|
|
|
@ -198,7 +198,7 @@ CONFIG_CLKIN_HZ=27000000
|
|||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_VCO_HZ=750000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
CONFIG_MIN_SCLK_HZ=27000000
|
||||
|
||||
#
|
||||
|
|
|
@ -199,7 +199,7 @@ CONFIG_CLKIN_HZ=11059200
|
|||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_VCO_HZ=750000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
CONFIG_MIN_SCLK_HZ=27000000
|
||||
|
||||
#
|
||||
|
|
|
@ -206,7 +206,7 @@ CONFIG_CLKIN_HZ=25000000
|
|||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_VCO_HZ=600000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
CONFIG_MIN_SCLK_HZ=27000000
|
||||
|
||||
#
|
||||
|
|
|
@ -1,6 +1,7 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.22.6
|
||||
# Linux kernel version: 2.6.22.10
|
||||
# Sat Oct 27 02:34:07 2007
|
||||
#
|
||||
# CONFIG_MMU is not set
|
||||
# CONFIG_FPU is not set
|
||||
|
@ -64,7 +65,6 @@ CONFIG_FUTEX=y
|
|||
CONFIG_ANON_INODES=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_SIGNALFD=y
|
||||
CONFIG_TIMERFD=y
|
||||
CONFIG_EVENTFD=y
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
|
||||
|
@ -117,6 +117,9 @@ CONFIG_PREEMPT_VOLUNTARY=y
|
|||
#
|
||||
# Processor and Board Settings
|
||||
#
|
||||
# CONFIG_BF522 is not set
|
||||
# CONFIG_BF525 is not set
|
||||
# CONFIG_BF527 is not set
|
||||
# CONFIG_BF531 is not set
|
||||
# CONFIG_BF532 is not set
|
||||
# CONFIG_BF533 is not set
|
||||
|
@ -129,6 +132,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
|
|||
CONFIG_BF549=y
|
||||
# CONFIG_BF561 is not set
|
||||
CONFIG_BF_REV_0_0=y
|
||||
# CONFIG_BF_REV_0_1 is not set
|
||||
# CONFIG_BF_REV_0_2 is not set
|
||||
# CONFIG_BF_REV_0_3 is not set
|
||||
# CONFIG_BF_REV_0_4 is not set
|
||||
|
@ -137,6 +141,7 @@ CONFIG_BF_REV_0_0=y
|
|||
# CONFIG_BF_REV_NONE is not set
|
||||
CONFIG_BF54x=y
|
||||
CONFIG_BFIN_SINGLE_CORE=y
|
||||
# CONFIG_BFIN527_EZKIT is not set
|
||||
# CONFIG_BFIN533_EZKIT is not set
|
||||
# CONFIG_BFIN533_STAMP is not set
|
||||
# CONFIG_BFIN537_STAMP is not set
|
||||
|
@ -147,8 +152,23 @@ CONFIG_BFIN548_EZKIT=y
|
|||
# CONFIG_BFIN561_EZKIT is not set
|
||||
# CONFIG_BFIN561_TEPLA is not set
|
||||
# CONFIG_PNAV10 is not set
|
||||
# CONFIG_H8606_HVSISTEMAS is not set
|
||||
# CONFIG_GENERIC_BOARD is not set
|
||||
CONFIG_IRQ_PLL_WAKEUP=7
|
||||
CONFIG_IRQ_RTC=8
|
||||
CONFIG_IRQ_SPORT0_RX=9
|
||||
CONFIG_IRQ_SPORT0_TX=9
|
||||
CONFIG_IRQ_SPORT1_RX=9
|
||||
CONFIG_IRQ_SPORT1_TX=9
|
||||
CONFIG_IRQ_UART0_RX=10
|
||||
CONFIG_IRQ_UART0_TX=10
|
||||
CONFIG_IRQ_UART1_RX=10
|
||||
CONFIG_IRQ_UART1_TX=10
|
||||
CONFIG_IRQ_CNT=8
|
||||
CONFIG_IRQ_USB_INT0=11
|
||||
CONFIG_IRQ_USB_INT1=11
|
||||
CONFIG_IRQ_USB_INT2=11
|
||||
CONFIG_IRQ_USB_DMA=11
|
||||
CONFIG_IRQ_TIMER0=11
|
||||
CONFIG_IRQ_TIMER1=11
|
||||
CONFIG_IRQ_TIMER2=11
|
||||
|
@ -160,15 +180,6 @@ CONFIG_IRQ_TIMER7=11
|
|||
CONFIG_IRQ_TIMER8=11
|
||||
CONFIG_IRQ_TIMER9=11
|
||||
CONFIG_IRQ_TIMER10=11
|
||||
CONFIG_IRQ_RTC=8
|
||||
CONFIG_IRQ_SPORT0_RX=9
|
||||
CONFIG_IRQ_SPORT0_TX=9
|
||||
CONFIG_IRQ_SPORT1_RX=9
|
||||
CONFIG_IRQ_SPORT1_TX=9
|
||||
CONFIG_IRQ_UART0_RX=10
|
||||
CONFIG_IRQ_UART0_TX=10
|
||||
CONFIG_IRQ_UART1_RX=10
|
||||
CONFIG_IRQ_UART1_TX=10
|
||||
|
||||
#
|
||||
# BF548 Specific Configuration
|
||||
|
@ -236,16 +247,11 @@ CONFIG_IRQ_PIXC_IN0=8
|
|||
CONFIG_IRQ_PIXC_IN1=8
|
||||
CONFIG_IRQ_PIXC_OUT=8
|
||||
CONFIG_IRQ_SDH=8
|
||||
CONFIG_IRQ_CNT=8
|
||||
CONFIG_IRQ_KEY=8
|
||||
CONFIG_IRQ_CAN1_RX=11
|
||||
CONFIG_IRQ_CAN1_TX=11
|
||||
CONFIG_IRQ_SDH_MASK0=11
|
||||
CONFIG_IRQ_SDH_MASK1=11
|
||||
CONFIG_IRQ_USB_INT0=11
|
||||
CONFIG_IRQ_USB_INT1=11
|
||||
CONFIG_IRQ_USB_INT2=11
|
||||
CONFIG_IRQ_USB_DMA=11
|
||||
CONFIG_IRQ_OTPSEC=11
|
||||
CONFIG_IRQ_PINT2=11
|
||||
CONFIG_IRQ_PINT3=11
|
||||
|
@ -273,9 +279,9 @@ CONFIG_PINT3_ASSIGN=0x02020303
|
|||
#
|
||||
CONFIG_CLKIN_HZ=25000000
|
||||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_VCO_HZ=533000000
|
||||
CONFIG_MAX_VCO_HZ=533333333
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
CONFIG_MIN_SCLK_HZ=27000000
|
||||
|
||||
#
|
||||
|
@ -332,9 +338,10 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
|
|||
# CONFIG_RESOURCES_64BIT is not set
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_LARGE_ALLOCS=y
|
||||
# CONFIG_BFIN_GPTIMERS is not set
|
||||
CONFIG_BFIN_DMA_5XX=y
|
||||
# CONFIG_DMA_UNCACHED_2M is not set
|
||||
CONFIG_DMA_UNCACHED_1M=y
|
||||
CONFIG_DMA_UNCACHED_2M=y
|
||||
# CONFIG_DMA_UNCACHED_1M is not set
|
||||
# CONFIG_DMA_UNCACHED_NONE is not set
|
||||
|
||||
#
|
||||
|
@ -353,7 +360,7 @@ CONFIG_L1_MAX_PIECE=16
|
|||
#
|
||||
|
||||
#
|
||||
# EBIU_AMBCTL Global Control
|
||||
# EBIU_AMGCTL Global Control
|
||||
#
|
||||
CONFIG_C_AMCKEN=y
|
||||
# CONFIG_C_AMBEN is not set
|
||||
|
@ -722,7 +729,7 @@ CONFIG_NETDEV_10000=y
|
|||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
CONFIG_INPUT=m
|
||||
# CONFIG_INPUT_FF_MEMLESS is not set
|
||||
# CONFIG_INPUT_POLLDEV is not set
|
||||
|
||||
|
@ -731,18 +738,39 @@ CONFIG_INPUT=y
|
|||
#
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_TSDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
CONFIG_INPUT_TSDEV=m
|
||||
CONFIG_INPUT_TSDEV_SCREEN_X=240
|
||||
CONFIG_INPUT_TSDEV_SCREEN_Y=320
|
||||
CONFIG_INPUT_EVDEV=m
|
||||
CONFIG_INPUT_EVBUG=m
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
CONFIG_INPUT_KEYBOARD=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
# CONFIG_KEYBOARD_SUNKBD is not set
|
||||
# CONFIG_KEYBOARD_LKKBD is not set
|
||||
# CONFIG_KEYBOARD_XTKBD is not set
|
||||
# CONFIG_KEYBOARD_NEWTON is not set
|
||||
# CONFIG_KEYBOARD_STOWAWAY is not set
|
||||
# CONFIG_KEYBOARD_GPIO is not set
|
||||
CONFIG_KEYBOARD_BFIN=m
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TABLET is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
# CONFIG_TOUCHSCREEN_ADS7846 is not set
|
||||
CONFIG_TOUCHSCREEN_AD7877=m
|
||||
# CONFIG_TOUCHSCREEN_GUNZE is not set
|
||||
# CONFIG_TOUCHSCREEN_ELO is not set
|
||||
# CONFIG_TOUCHSCREEN_MTOUCH is not set
|
||||
# CONFIG_TOUCHSCREEN_MK712 is not set
|
||||
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
|
||||
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
|
||||
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
|
||||
# CONFIG_TOUCHSCREEN_UCB1400 is not set
|
||||
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
|
||||
CONFIG_INPUT_MISC=y
|
||||
# CONFIG_INPUT_ATI_REMOTE is not set
|
||||
# CONFIG_INPUT_ATI_REMOTE2 is not set
|
||||
|
@ -764,9 +792,9 @@ CONFIG_INPUT_MISC=y
|
|||
#
|
||||
# CONFIG_AD9960 is not set
|
||||
# CONFIG_SPI_ADC_BF533 is not set
|
||||
# CONFIG_BFIN_PFLAGS is not set
|
||||
# CONFIG_BF5xx_PFLAGS is not set
|
||||
# CONFIG_BF5xx_PPIFCD is not set
|
||||
# CONFIG_BF5xx_TIMERS is not set
|
||||
# CONFIG_BFIN_SIMPLE_TIMER is not set
|
||||
# CONFIG_BF5xx_PPI is not set
|
||||
# CONFIG_BFIN_SPORT is not set
|
||||
# CONFIG_BFIN_TIMER_LATENCY is not set
|
||||
|
@ -958,17 +986,92 @@ CONFIG_DAB=y
|
|||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_FB is not set
|
||||
CONFIG_FB=m
|
||||
CONFIG_FIRMWARE_EDID=y
|
||||
# CONFIG_FB_DDC is not set
|
||||
CONFIG_FB_CFB_FILLRECT=m
|
||||
CONFIG_FB_CFB_COPYAREA=m
|
||||
CONFIG_FB_CFB_IMAGEBLIT=m
|
||||
# CONFIG_FB_SYS_FILLRECT is not set
|
||||
# CONFIG_FB_SYS_COPYAREA is not set
|
||||
# CONFIG_FB_SYS_IMAGEBLIT is not set
|
||||
# CONFIG_FB_SYS_FOPS is not set
|
||||
CONFIG_FB_DEFERRED_IO=y
|
||||
# CONFIG_FB_SVGALIB is not set
|
||||
# CONFIG_FB_MACMODES is not set
|
||||
# CONFIG_FB_BACKLIGHT is not set
|
||||
# CONFIG_FB_MODE_HELPERS is not set
|
||||
# CONFIG_FB_TILEBLITTING is not set
|
||||
|
||||
#
|
||||
# Frame buffer hardware drivers
|
||||
#
|
||||
# CONFIG_FB_BFIN_7171 is not set
|
||||
# CONFIG_FB_BFIN_7393 is not set
|
||||
CONFIG_FB_BF54X_LQ043=m
|
||||
# CONFIG_FB_BFIN_T350MCQB is not set
|
||||
# CONFIG_FB_S1D13XXX is not set
|
||||
# CONFIG_FB_VIRTUAL is not set
|
||||
# CONFIG_LOGO is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
CONFIG_SOUND=y
|
||||
|
||||
#
|
||||
# Advanced Linux Sound Architecture
|
||||
#
|
||||
CONFIG_SND=y
|
||||
CONFIG_SND_TIMER=y
|
||||
CONFIG_SND_PCM=y
|
||||
# CONFIG_SND_SEQUENCER is not set
|
||||
CONFIG_SND_OSSEMUL=y
|
||||
CONFIG_SND_MIXER_OSS=y
|
||||
CONFIG_SND_PCM_OSS=y
|
||||
CONFIG_SND_PCM_OSS_PLUGINS=y
|
||||
# CONFIG_SND_DYNAMIC_MINORS is not set
|
||||
CONFIG_SND_SUPPORT_OLD_API=y
|
||||
CONFIG_SND_VERBOSE_PROCFS=y
|
||||
# CONFIG_SND_VERBOSE_PRINTK is not set
|
||||
# CONFIG_SND_DEBUG is not set
|
||||
|
||||
#
|
||||
# Generic devices
|
||||
#
|
||||
# CONFIG_SND_DUMMY is not set
|
||||
# CONFIG_SND_MTPAV is not set
|
||||
# CONFIG_SND_SERIAL_U16550 is not set
|
||||
# CONFIG_SND_MPU401 is not set
|
||||
|
||||
#
|
||||
# ALSA Blackfin devices
|
||||
#
|
||||
# CONFIG_SND_BLACKFIN_AD1836 is not set
|
||||
# CONFIG_SND_BFIN_AD73311 is not set
|
||||
|
||||
#
|
||||
# System on Chip audio support
|
||||
#
|
||||
CONFIG_SND_SOC_AC97_BUS=y
|
||||
CONFIG_SND_SOC=y
|
||||
CONFIG_SND_BF5XX_SOC=y
|
||||
CONFIG_SND_BF5XX_SOC_AC97=y
|
||||
CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
|
||||
CONFIG_SND_BF5XX_SPORT_NUM=0
|
||||
# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
|
||||
CONFIG_SND_SOC_AD1980=y
|
||||
|
||||
#
|
||||
# Open Sound System
|
||||
#
|
||||
# CONFIG_SOUND_PRIME is not set
|
||||
CONFIG_AC97_BUS=y
|
||||
|
||||
#
|
||||
# HID Devices
|
||||
#
|
||||
CONFIG_HID=y
|
||||
CONFIG_HID=m
|
||||
# CONFIG_HID_DEBUG is not set
|
||||
|
||||
#
|
||||
|
@ -1101,8 +1204,13 @@ CONFIG_EXT2_FS=y
|
|||
CONFIG_EXT2_FS_XATTR=y
|
||||
# CONFIG_EXT2_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT2_FS_SECURITY is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
# CONFIG_EXT3_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
# CONFIG_EXT4DEV_FS is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
@ -1123,15 +1231,22 @@ CONFIG_DNOTIFY=y
|
|||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
CONFIG_ISO9660_FS=m
|
||||
CONFIG_JOLIET=y
|
||||
CONFIG_ZISOFS=y
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
CONFIG_FAT_FS=m
|
||||
CONFIG_MSDOS_FS=m
|
||||
CONFIG_VFAT_FS=m
|
||||
CONFIG_FAT_DEFAULT_CODEPAGE=437
|
||||
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
||||
CONFIG_NTFS_FS=m
|
||||
# CONFIG_NTFS_DEBUG is not set
|
||||
CONFIG_NTFS_RW=y
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
|
@ -1183,10 +1298,33 @@ CONFIG_JFFS2_RTIME=y
|
|||
#
|
||||
# Network File Systems
|
||||
#
|
||||
# CONFIG_NFS_FS is not set
|
||||
# CONFIG_NFSD is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
CONFIG_NFSD=m
|
||||
CONFIG_NFSD_V3=y
|
||||
# CONFIG_NFSD_V3_ACL is not set
|
||||
# CONFIG_NFSD_V4 is not set
|
||||
CONFIG_NFSD_TCP=y
|
||||
CONFIG_LOCKD=m
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_EXPORTFS=m
|
||||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=m
|
||||
# CONFIG_SUNRPC_BIND34 is not set
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
CONFIG_SMB_FS=m
|
||||
CONFIG_SMB_NLS_DEFAULT=y
|
||||
CONFIG_SMB_NLS_REMOTE="cp437"
|
||||
CONFIG_CIFS=y
|
||||
# CONFIG_CIFS_STATS is not set
|
||||
# CONFIG_CIFS_WEAK_PW_HASH is not set
|
||||
# CONFIG_CIFS_XATTR is not set
|
||||
# CONFIG_CIFS_DEBUG2 is not set
|
||||
# CONFIG_CIFS_EXPERIMENTAL is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
|
@ -1195,13 +1333,68 @@ CONFIG_JFFS2_RTIME=y
|
|||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
# CONFIG_ACORN_PARTITION is not set
|
||||
# CONFIG_OSF_PARTITION is not set
|
||||
# CONFIG_AMIGA_PARTITION is not set
|
||||
# CONFIG_ATARI_PARTITION is not set
|
||||
# CONFIG_MAC_PARTITION is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
# CONFIG_BSD_DISKLABEL is not set
|
||||
# CONFIG_MINIX_SUBPARTITION is not set
|
||||
# CONFIG_SOLARIS_X86_PARTITION is not set
|
||||
# CONFIG_UNIXWARE_DISKLABEL is not set
|
||||
# CONFIG_LDM_PARTITION is not set
|
||||
# CONFIG_SGI_PARTITION is not set
|
||||
# CONFIG_ULTRIX_PARTITION is not set
|
||||
# CONFIG_SUN_PARTITION is not set
|
||||
# CONFIG_KARMA_PARTITION is not set
|
||||
# CONFIG_EFI_PARTITION is not set
|
||||
# CONFIG_SYSV68_PARTITION is not set
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
CONFIG_NLS_CODEPAGE_437=m
|
||||
CONFIG_NLS_CODEPAGE_737=m
|
||||
CONFIG_NLS_CODEPAGE_775=m
|
||||
CONFIG_NLS_CODEPAGE_850=m
|
||||
CONFIG_NLS_CODEPAGE_852=m
|
||||
CONFIG_NLS_CODEPAGE_855=m
|
||||
CONFIG_NLS_CODEPAGE_857=m
|
||||
CONFIG_NLS_CODEPAGE_860=m
|
||||
CONFIG_NLS_CODEPAGE_861=m
|
||||
CONFIG_NLS_CODEPAGE_862=m
|
||||
CONFIG_NLS_CODEPAGE_863=m
|
||||
CONFIG_NLS_CODEPAGE_864=m
|
||||
CONFIG_NLS_CODEPAGE_865=m
|
||||
CONFIG_NLS_CODEPAGE_866=m
|
||||
CONFIG_NLS_CODEPAGE_869=m
|
||||
CONFIG_NLS_CODEPAGE_936=m
|
||||
CONFIG_NLS_CODEPAGE_950=m
|
||||
CONFIG_NLS_CODEPAGE_932=m
|
||||
CONFIG_NLS_CODEPAGE_949=m
|
||||
CONFIG_NLS_CODEPAGE_874=m
|
||||
CONFIG_NLS_ISO8859_8=m
|
||||
CONFIG_NLS_CODEPAGE_1250=m
|
||||
CONFIG_NLS_CODEPAGE_1251=m
|
||||
CONFIG_NLS_ASCII=m
|
||||
CONFIG_NLS_ISO8859_1=m
|
||||
CONFIG_NLS_ISO8859_2=m
|
||||
CONFIG_NLS_ISO8859_3=m
|
||||
CONFIG_NLS_ISO8859_4=m
|
||||
CONFIG_NLS_ISO8859_5=m
|
||||
CONFIG_NLS_ISO8859_6=m
|
||||
CONFIG_NLS_ISO8859_7=m
|
||||
CONFIG_NLS_ISO8859_9=m
|
||||
CONFIG_NLS_ISO8859_13=m
|
||||
CONFIG_NLS_ISO8859_14=m
|
||||
CONFIG_NLS_ISO8859_15=m
|
||||
CONFIG_NLS_KOI8_R=m
|
||||
CONFIG_NLS_KOI8_U=m
|
||||
CONFIG_NLS_UTF8=m
|
||||
|
||||
#
|
||||
# Distributed Lock Manager
|
||||
|
|
|
@ -243,7 +243,7 @@ CONFIG_CLKIN_HZ=30000000
|
|||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_VCO_HZ=600000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
CONFIG_MIN_SCLK_HZ=27000000
|
||||
|
||||
#
|
||||
|
|
|
@ -204,7 +204,7 @@ CONFIG_CLKIN_HZ=24576000
|
|||
# CONFIG_BFIN_KERNEL_CLOCK is not set
|
||||
CONFIG_MAX_VCO_HZ=600000000
|
||||
CONFIG_MIN_VCO_HZ=50000000
|
||||
CONFIG_MAX_SCLK_HZ=133000000
|
||||
CONFIG_MAX_SCLK_HZ=133333333
|
||||
CONFIG_MIN_SCLK_HZ=27000000
|
||||
|
||||
#
|
||||
|
|
|
@ -54,9 +54,11 @@ ENTRY(_ret_from_fork)
|
|||
[sp + PT_IPEND] = r0;
|
||||
/* do a 'fake' RTI by jumping to [RETI]
|
||||
* to avoid clearing supervisor mode in child
|
||||
*/
|
||||
*/
|
||||
r0 = [sp + PT_PC];
|
||||
[sp + PT_P0] = r0;
|
||||
|
||||
RESTORE_ALL_SYS
|
||||
p0 = reti;
|
||||
jump (p0);
|
||||
ENDPROC(_ret_from_fork)
|
||||
|
||||
|
|
|
@ -129,4 +129,18 @@ ENTRY(_atomic_xor32)
|
|||
rts;
|
||||
ENDPROC (_atomic_ior32)
|
||||
|
||||
.align 16
|
||||
/*
|
||||
* safe_user_instruction
|
||||
* Four NOPS are enough to allow the pipeline to speculativily load
|
||||
* execute anything it wants. After that, things have gone bad, and
|
||||
* we are stuck - so panic. Since we might be in user space, we can't
|
||||
* call panic, so just cause a unhandled exception, this should cause
|
||||
* a dump of the trace buffer so we can tell were we are, and a reboot
|
||||
*/
|
||||
ENTRY(_safe_user_instruction)
|
||||
NOP; NOP; NOP; NOP;
|
||||
EXCPT 0x4;
|
||||
ENDPROC(_safe_user_instruction)
|
||||
|
||||
ENTRY(_fixed_code_end)
|
||||
|
|
|
@ -20,8 +20,7 @@
|
|||
#else
|
||||
# define tassert(expr) \
|
||||
if (!(expr)) \
|
||||
printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", \
|
||||
__FILE__, __func__, __LINE__);
|
||||
printk(KERN_DEBUG "%s:%s:%i: Assertion failed: " #expr "\n", __FILE__, __func__, __LINE__);
|
||||
#endif
|
||||
|
||||
#define BFIN_TIMER_NUM_GROUP (BFIN_TIMER_OCTET(MAX_BLACKFIN_GPTIMERS - 1) + 1)
|
||||
|
@ -70,7 +69,7 @@ static volatile GPTIMER_group_regs *const group_regs[BFIN_TIMER_NUM_GROUP] =
|
|||
#endif
|
||||
};
|
||||
|
||||
static uint32_t const dis_mask[MAX_BLACKFIN_GPTIMERS] =
|
||||
static uint32_t const trun_mask[MAX_BLACKFIN_GPTIMERS] =
|
||||
{
|
||||
TIMER_STATUS_TRUN0,
|
||||
TIMER_STATUS_TRUN1,
|
||||
|
@ -90,7 +89,27 @@ static uint32_t const dis_mask[MAX_BLACKFIN_GPTIMERS] =
|
|||
#endif
|
||||
};
|
||||
|
||||
static uint32_t const irq_mask[MAX_BLACKFIN_GPTIMERS] =
|
||||
static uint32_t const tovf_mask[MAX_BLACKFIN_GPTIMERS] =
|
||||
{
|
||||
TIMER_STATUS_TOVF0,
|
||||
TIMER_STATUS_TOVF1,
|
||||
TIMER_STATUS_TOVF2,
|
||||
#if (MAX_BLACKFIN_GPTIMERS > 3)
|
||||
TIMER_STATUS_TOVF3,
|
||||
TIMER_STATUS_TOVF4,
|
||||
TIMER_STATUS_TOVF5,
|
||||
TIMER_STATUS_TOVF6,
|
||||
TIMER_STATUS_TOVF7,
|
||||
#endif
|
||||
#if (MAX_BLACKFIN_GPTIMERS > 8)
|
||||
TIMER_STATUS_TOVF8,
|
||||
TIMER_STATUS_TOVF9,
|
||||
TIMER_STATUS_TOVF10,
|
||||
TIMER_STATUS_TOVF11,
|
||||
#endif
|
||||
};
|
||||
|
||||
static uint32_t const timil_mask[MAX_BLACKFIN_GPTIMERS] =
|
||||
{
|
||||
TIMER_STATUS_TIMIL0,
|
||||
TIMER_STATUS_TIMIL1,
|
||||
|
@ -165,17 +184,31 @@ EXPORT_SYMBOL(set_gptimer_status);
|
|||
uint16_t get_gptimer_intr(int timer_id)
|
||||
{
|
||||
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
|
||||
return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & irq_mask[timer_id]) ? 1 : 0;
|
||||
return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]) ? 1 : 0;
|
||||
}
|
||||
EXPORT_SYMBOL(get_gptimer_intr);
|
||||
|
||||
void clear_gptimer_intr(int timer_id)
|
||||
{
|
||||
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
|
||||
group_regs[BFIN_TIMER_OCTET(timer_id)]->status = irq_mask[timer_id];
|
||||
group_regs[BFIN_TIMER_OCTET(timer_id)]->status = timil_mask[timer_id];
|
||||
}
|
||||
EXPORT_SYMBOL(clear_gptimer_intr);
|
||||
|
||||
uint16_t get_gptimer_over(int timer_id)
|
||||
{
|
||||
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
|
||||
return (group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]) ? 1 : 0;
|
||||
}
|
||||
EXPORT_SYMBOL(get_gptimer_over);
|
||||
|
||||
void clear_gptimer_over(int timer_id)
|
||||
{
|
||||
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
|
||||
group_regs[BFIN_TIMER_OCTET(timer_id)]->status = tovf_mask[timer_id];
|
||||
}
|
||||
EXPORT_SYMBOL(clear_gptimer_over);
|
||||
|
||||
void set_gptimer_config(int timer_id, uint16_t config)
|
||||
{
|
||||
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
|
||||
|
@ -214,7 +247,7 @@ void disable_gptimers(uint16_t mask)
|
|||
}
|
||||
for (i = 0; i < MAX_BLACKFIN_GPTIMERS; ++i)
|
||||
if (mask & (1 << i))
|
||||
group_regs[BFIN_TIMER_OCTET(i)]->status |= dis_mask[i];
|
||||
group_regs[BFIN_TIMER_OCTET(i)]->status |= trun_mask[i];
|
||||
SSYNC();
|
||||
}
|
||||
EXPORT_SYMBOL(disable_gptimers);
|
||||
|
|
|
@ -316,6 +316,15 @@ void __init setup_arch(char **cmdline_p)
|
|||
|
||||
init_leds();
|
||||
|
||||
_bfin_swrst = bfin_read_SWRST();
|
||||
|
||||
if (_bfin_swrst & RESET_DOUBLE)
|
||||
printk(KERN_INFO "Recovering from Double Fault event\n");
|
||||
else if (_bfin_swrst & RESET_WDOG)
|
||||
printk(KERN_INFO "Recovering from Watchdog event\n");
|
||||
else if (_bfin_swrst & RESET_SOFTWARE)
|
||||
printk(KERN_NOTICE "Reset caused by Software reset\n");
|
||||
|
||||
printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n");
|
||||
if (bfin_compiled_revid() == 0xffff)
|
||||
printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
|
||||
|
@ -402,8 +411,6 @@ void __init setup_arch(char **cmdline_p)
|
|||
if (l1_length > L1_DATA_A_LENGTH)
|
||||
panic("L1 data memory overflow\n");
|
||||
|
||||
_bfin_swrst = bfin_read_SWRST();
|
||||
|
||||
/* Copy atomic sequences to their fixed location, and sanity check that
|
||||
these locations are the ones that we advertise to userspace. */
|
||||
memcpy((void *)FIXED_CODE_START, &fixed_code_start,
|
||||
|
@ -424,6 +431,8 @@ void __init setup_arch(char **cmdline_p)
|
|||
!= ATOMIC_AND32 - FIXED_CODE_START);
|
||||
BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
|
||||
!= ATOMIC_XOR32 - FIXED_CODE_START);
|
||||
BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
|
||||
!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
|
||||
|
||||
init_exception_vectors();
|
||||
bf53x_cache_init();
|
||||
|
|
|
@ -37,10 +37,24 @@
|
|||
#include <asm/blackfin.h>
|
||||
#include <asm/irq_handler.h>
|
||||
#include <asm/trace.h>
|
||||
#include <asm/fixed_code.h>
|
||||
|
||||
#ifdef CONFIG_KGDB
|
||||
# include <linux/debugger.h>
|
||||
# include <linux/kgdb.h>
|
||||
|
||||
# define CHK_DEBUGGER_TRAP() \
|
||||
do { \
|
||||
CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
|
||||
} while (0)
|
||||
# define CHK_DEBUGGER_TRAP_MAYBE() \
|
||||
do { \
|
||||
if (kgdb_connected) \
|
||||
CHK_DEBUGGER_TRAP(); \
|
||||
} while (0)
|
||||
#else
|
||||
# define CHK_DEBUGGER_TRAP() do { } while (0)
|
||||
# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
|
||||
#endif
|
||||
|
||||
/* Initiate the event table handler */
|
||||
|
@ -53,13 +67,13 @@ void __init trap_init(void)
|
|||
|
||||
int kstack_depth_to_print = 48;
|
||||
|
||||
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
|
||||
static int printk_address(unsigned long address)
|
||||
static void decode_address(char *buf, unsigned long address)
|
||||
{
|
||||
struct vm_list_struct *vml;
|
||||
struct task_struct *p;
|
||||
struct mm_struct *mm;
|
||||
unsigned long offset;
|
||||
unsigned long flags, offset;
|
||||
unsigned int in_exception = bfin_read_IPEND() & 0x10;
|
||||
|
||||
#ifdef CONFIG_KALLSYMS
|
||||
unsigned long symsize;
|
||||
|
@ -75,20 +89,33 @@ static int printk_address(unsigned long address)
|
|||
/* yeah! kernel space! */
|
||||
if (!modname)
|
||||
modname = delim = "";
|
||||
return printk("<0x%p> { %s%s%s%s + 0x%lx }",
|
||||
sprintf(buf, "<0x%p> { %s%s%s%s + 0x%lx }",
|
||||
(void *)address, delim, modname, delim, symname,
|
||||
(unsigned long)offset);
|
||||
return;
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Problem in fixed code section? */
|
||||
if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
|
||||
sprintf(buf, "<0x%p> /* Maybe fixed code section */", (void *)address);
|
||||
return;
|
||||
}
|
||||
|
||||
/* Problem somewhere before the kernel start address */
|
||||
if (address < CONFIG_BOOT_LOAD) {
|
||||
sprintf(buf, "<0x%p> /* Maybe null pointer? */", (void *)address);
|
||||
return;
|
||||
}
|
||||
|
||||
/* looks like we're off in user-land, so let's walk all the
|
||||
* mappings of all our processes and see if we can't be a whee
|
||||
* bit more specific
|
||||
*/
|
||||
write_lock_irq(&tasklist_lock);
|
||||
write_lock_irqsave(&tasklist_lock, flags);
|
||||
for_each_process(p) {
|
||||
mm = get_task_mm(p);
|
||||
mm = (in_exception ? p->mm : get_task_mm(p));
|
||||
if (!mm)
|
||||
continue;
|
||||
|
||||
|
@ -117,25 +144,30 @@ static int printk_address(unsigned long address)
|
|||
else
|
||||
offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT);
|
||||
|
||||
write_unlock_irq(&tasklist_lock);
|
||||
mmput(mm);
|
||||
return printk("<0x%p> [ %s + 0x%lx ]",
|
||||
(void *)address, name, offset);
|
||||
sprintf(buf, "<0x%p> [ %s + 0x%lx ]",
|
||||
(void *)address, name, offset);
|
||||
if (!in_exception)
|
||||
mmput(mm);
|
||||
goto done;
|
||||
}
|
||||
|
||||
vml = vml->next;
|
||||
}
|
||||
mmput(mm);
|
||||
if (!in_exception)
|
||||
mmput(mm);
|
||||
}
|
||||
write_unlock_irq(&tasklist_lock);
|
||||
|
||||
/* we were unable to find this address anywhere */
|
||||
return printk("[<0x%p>]", (void *)address);
|
||||
sprintf(buf, "[<0x%p>]", (void *)address);
|
||||
|
||||
done:
|
||||
write_unlock_irqrestore(&tasklist_lock, flags);
|
||||
}
|
||||
#endif
|
||||
|
||||
asmlinkage void double_fault_c(struct pt_regs *fp)
|
||||
{
|
||||
console_verbose();
|
||||
oops_in_progress = 1;
|
||||
printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
|
||||
dump_bfin_regs(fp, (void *)fp->retx);
|
||||
panic("Double Fault - unrecoverable event\n");
|
||||
|
@ -151,23 +183,30 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
siginfo_t info;
|
||||
unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE;
|
||||
|
||||
#ifdef CONFIG_KGDB
|
||||
# define CHK_DEBUGGER_TRAP() \
|
||||
do { \
|
||||
CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
|
||||
} while (0)
|
||||
# define CHK_DEBUGGER_TRAP_MAYBE() \
|
||||
do { \
|
||||
if (kgdb_connected) \
|
||||
CHK_DEBUGGER_TRAP(); \
|
||||
} while (0)
|
||||
#else
|
||||
# define CHK_DEBUGGER_TRAP() do { } while (0)
|
||||
# define CHK_DEBUGGER_TRAP_MAYBE() do { } while (0)
|
||||
#endif
|
||||
|
||||
trace_buffer_save(j);
|
||||
|
||||
/* Important - be very careful dereferncing pointers - will lead to
|
||||
* double faults if the stack has become corrupt
|
||||
*/
|
||||
|
||||
/* If the fault was caused by a kernel thread, or interrupt handler
|
||||
* we will kernel panic, so the system reboots.
|
||||
* If KGDB is enabled, don't set this for kernel breakpoints
|
||||
*/
|
||||
if ((bfin_read_IPEND() & 0xFFC0)
|
||||
#ifdef CONFIG_KGDB
|
||||
&& trapnr != VEC_EXCPT02
|
||||
#endif
|
||||
){
|
||||
console_verbose();
|
||||
oops_in_progress = 1;
|
||||
} else if (current) {
|
||||
if (current->mm == NULL) {
|
||||
console_verbose();
|
||||
oops_in_progress = 1;
|
||||
}
|
||||
}
|
||||
|
||||
/* trap_c() will be called for exceptions. During exceptions
|
||||
* processing, the pc value should be set with retx value.
|
||||
* With this change we can cleanup some code in signal.c- TODO
|
||||
|
@ -211,7 +250,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
case VEC_EXCPT03:
|
||||
info.si_code = SEGV_STACKFLOW;
|
||||
sig = SIGSEGV;
|
||||
printk(KERN_EMERG EXC_0x03);
|
||||
printk(KERN_NOTICE EXC_0x03);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x04 - User Defined, Caught by default */
|
||||
|
@ -240,7 +279,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
case VEC_OVFLOW:
|
||||
info.si_code = TRAP_TRACEFLOW;
|
||||
sig = SIGTRAP;
|
||||
printk(KERN_EMERG EXC_0x11);
|
||||
printk(KERN_NOTICE EXC_0x11);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x12 - Reserved, Caught by default */
|
||||
|
@ -262,14 +301,14 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
case VEC_UNDEF_I:
|
||||
info.si_code = ILL_ILLOPC;
|
||||
sig = SIGILL;
|
||||
printk(KERN_EMERG EXC_0x21);
|
||||
printk(KERN_NOTICE EXC_0x21);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x22 - Illegal Instruction Combination, handled here */
|
||||
case VEC_ILGAL_I:
|
||||
info.si_code = ILL_ILLPARAOP;
|
||||
sig = SIGILL;
|
||||
printk(KERN_EMERG EXC_0x22);
|
||||
printk(KERN_NOTICE EXC_0x22);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x23 - Data CPLB Protection Violation,
|
||||
|
@ -277,21 +316,21 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
case VEC_CPLB_VL:
|
||||
info.si_code = ILL_CPLB_VI;
|
||||
sig = SIGILL;
|
||||
printk(KERN_EMERG EXC_0x23);
|
||||
printk(KERN_NOTICE EXC_0x23);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x24 - Data access misaligned, handled here */
|
||||
case VEC_MISALI_D:
|
||||
info.si_code = BUS_ADRALN;
|
||||
sig = SIGBUS;
|
||||
printk(KERN_EMERG EXC_0x24);
|
||||
printk(KERN_NOTICE EXC_0x24);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x25 - Unrecoverable Event, handled here */
|
||||
case VEC_UNCOV:
|
||||
info.si_code = ILL_ILLEXCPT;
|
||||
sig = SIGILL;
|
||||
printk(KERN_EMERG EXC_0x25);
|
||||
printk(KERN_NOTICE EXC_0x25);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr,
|
||||
|
@ -299,7 +338,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
case VEC_CPLB_M:
|
||||
info.si_code = BUS_ADRALN;
|
||||
sig = SIGBUS;
|
||||
printk(KERN_EMERG EXC_0x26);
|
||||
printk(KERN_NOTICE EXC_0x26);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
|
||||
|
@ -307,11 +346,10 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
info.si_code = ILL_CPLB_MULHIT;
|
||||
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
|
||||
sig = SIGSEGV;
|
||||
printk(KERN_EMERG "\n"
|
||||
KERN_EMERG "NULL pointer access (probably)\n");
|
||||
printk(KERN_NOTICE "NULL pointer access (probably)\n");
|
||||
#else
|
||||
sig = SIGILL;
|
||||
printk(KERN_EMERG EXC_0x27);
|
||||
printk(KERN_NOTICE EXC_0x27);
|
||||
#endif
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
|
@ -331,7 +369,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
case VEC_ISTRU_VL: /* ADSP-BF535 only (MH) */
|
||||
info.si_code = BUS_OPFETCH;
|
||||
sig = SIGBUS;
|
||||
printk(KERN_EMERG "BF535: VEC_ISTRU_VL\n");
|
||||
printk(KERN_NOTICE "BF535: VEC_ISTRU_VL\n");
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
#else
|
||||
|
@ -341,7 +379,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
case VEC_MISALI_I:
|
||||
info.si_code = BUS_ADRALN;
|
||||
sig = SIGBUS;
|
||||
printk(KERN_EMERG EXC_0x2A);
|
||||
printk(KERN_NOTICE EXC_0x2A);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x2B - Instruction CPLB protection Violation,
|
||||
|
@ -349,14 +387,14 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
case VEC_CPLB_I_VL:
|
||||
info.si_code = ILL_CPLB_VI;
|
||||
sig = SIGILL;
|
||||
printk(KERN_EMERG EXC_0x2B);
|
||||
printk(KERN_NOTICE EXC_0x2B);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */
|
||||
case VEC_CPLB_I_M:
|
||||
info.si_code = ILL_CPLB_MISS;
|
||||
sig = SIGBUS;
|
||||
printk(KERN_EMERG EXC_0x2C);
|
||||
printk(KERN_NOTICE EXC_0x2C);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x2D - Instruction CPLB Multiple Hits, handled here */
|
||||
|
@ -364,10 +402,10 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
info.si_code = ILL_CPLB_MULHIT;
|
||||
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
|
||||
sig = SIGSEGV;
|
||||
printk(KERN_EMERG "\n\nJump to address 0 - 0x0fff\n");
|
||||
printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
|
||||
#else
|
||||
sig = SIGILL;
|
||||
printk(KERN_EMERG EXC_0x2D);
|
||||
printk(KERN_NOTICE EXC_0x2D);
|
||||
#endif
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
|
@ -375,7 +413,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
case VEC_ILL_RES:
|
||||
info.si_code = ILL_PRVOPC;
|
||||
sig = SIGILL;
|
||||
printk(KERN_EMERG EXC_0x2E);
|
||||
printk(KERN_NOTICE EXC_0x2E);
|
||||
CHK_DEBUGGER_TRAP();
|
||||
break;
|
||||
/* 0x2F - Reserved, Caught by default */
|
||||
|
@ -404,38 +442,40 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
break;
|
||||
}
|
||||
|
||||
if (sig != 0 && sig != SIGTRAP) {
|
||||
BUG_ON(sig == 0);
|
||||
|
||||
if (sig != SIGTRAP) {
|
||||
unsigned long stack;
|
||||
dump_bfin_regs(fp, (void *)fp->retx);
|
||||
dump_bfin_trace_buffer();
|
||||
|
||||
/* Print out the trace buffer if it makes sense */
|
||||
#ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
|
||||
if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
|
||||
printk(KERN_NOTICE "No trace since you do not have "
|
||||
"CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
|
||||
KERN_NOTICE "\n");
|
||||
else
|
||||
#endif
|
||||
dump_bfin_trace_buffer();
|
||||
show_stack(current, &stack);
|
||||
if (current->mm == NULL)
|
||||
if (oops_in_progress) {
|
||||
#ifndef CONFIG_ACCESS_CHECK
|
||||
printk(KERN_EMERG "Hey - dork - please turn on "
|
||||
"CONFIG_ACCESS_CHECK\n");
|
||||
#endif
|
||||
panic("Kernel exception");
|
||||
}
|
||||
|
||||
/* Ensure that bad return addresses don't end up in an infinite
|
||||
* loop, due to speculative loads/reads
|
||||
*/
|
||||
fp->pc = SAFE_USER_INSTRUCTION;
|
||||
}
|
||||
info.si_signo = sig;
|
||||
info.si_errno = 0;
|
||||
info.si_addr = (void *)fp->pc;
|
||||
force_sig_info(sig, &info, current);
|
||||
|
||||
/* if the address that we are about to return to is not valid, set it
|
||||
* to a valid address, if we have a current application or panic
|
||||
*/
|
||||
if (!(fp->pc <= physical_mem_end
|
||||
#if L1_CODE_LENGTH != 0
|
||||
|| (fp->pc >= L1_CODE_START &&
|
||||
fp->pc <= (L1_CODE_START + L1_CODE_LENGTH))
|
||||
#endif
|
||||
)) {
|
||||
if (current->mm) {
|
||||
fp->pc = current->mm->start_code;
|
||||
} else {
|
||||
printk(KERN_EMERG
|
||||
"I can't return to memory that doesn't exist"
|
||||
" - bad things happen\n");
|
||||
panic("Help - I've fallen and can't get up\n");
|
||||
}
|
||||
}
|
||||
|
||||
trace_buffer_restore(j);
|
||||
return;
|
||||
}
|
||||
|
@ -448,21 +488,21 @@ void dump_bfin_trace_buffer(void)
|
|||
{
|
||||
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
|
||||
int tflags, i = 0;
|
||||
char buf[150];
|
||||
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
|
||||
int j, index;
|
||||
#endif
|
||||
|
||||
trace_buffer_save(tflags);
|
||||
|
||||
printk(KERN_EMERG "Hardware Trace:\n");
|
||||
printk(KERN_NOTICE "Hardware Trace:\n");
|
||||
|
||||
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
|
||||
for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
|
||||
printk(KERN_EMERG "%4i Target : ", i);
|
||||
printk_address((unsigned long)bfin_read_TBUF());
|
||||
printk("\n" KERN_EMERG " Source : ");
|
||||
printk_address((unsigned long)bfin_read_TBUF());
|
||||
printk("\n");
|
||||
decode_address(buf, (unsigned long)bfin_read_TBUF());
|
||||
printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
|
||||
decode_address(buf, (unsigned long)bfin_read_TBUF());
|
||||
printk(KERN_NOTICE " Source : %s\n", buf);
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -474,17 +514,16 @@ void dump_bfin_trace_buffer(void)
|
|||
|
||||
j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
|
||||
while (j) {
|
||||
printk(KERN_EMERG "%4i Target : ", i);
|
||||
printk_address(software_trace_buff[index]);
|
||||
decode_address(buf, software_trace_buff[index]);
|
||||
printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
|
||||
index -= 1;
|
||||
if (index < 0 )
|
||||
index = EXPAND_LEN;
|
||||
printk("\n" KERN_EMERG " Source : ");
|
||||
printk_address(software_trace_buff[index]);
|
||||
decode_address(buf, software_trace_buff[index]);
|
||||
printk(KERN_NOTICE " Source : %s\n", buf);
|
||||
index -= 1;
|
||||
if (index < 0)
|
||||
index = EXPAND_LEN;
|
||||
printk("\n");
|
||||
j--;
|
||||
i++;
|
||||
}
|
||||
|
@ -499,10 +538,7 @@ static void show_trace(struct task_struct *tsk, unsigned long *sp)
|
|||
{
|
||||
unsigned long addr;
|
||||
|
||||
printk("\nCall Trace:");
|
||||
#ifdef CONFIG_KALLSYMS
|
||||
printk("\n");
|
||||
#endif
|
||||
printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n");
|
||||
|
||||
while (!kstack_end(sp)) {
|
||||
addr = *sp++;
|
||||
|
@ -518,7 +554,7 @@ static void show_trace(struct task_struct *tsk, unsigned long *sp)
|
|||
print_ip_sym(addr);
|
||||
}
|
||||
|
||||
printk("\n");
|
||||
printk(KERN_NOTICE "\n");
|
||||
}
|
||||
|
||||
void show_stack(struct task_struct *task, unsigned long *stack)
|
||||
|
@ -540,14 +576,15 @@ void show_stack(struct task_struct *task, unsigned long *stack)
|
|||
addr = (unsigned long)stack;
|
||||
endstack = (unsigned long *)PAGE_ALIGN(addr);
|
||||
|
||||
printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
|
||||
printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack);
|
||||
for (i = 0; i < kstack_depth_to_print; i++) {
|
||||
if (stack + 1 > endstack)
|
||||
break;
|
||||
if (i % 8 == 0)
|
||||
printk("\n" KERN_EMERG " ");
|
||||
printk("\n" KERN_NOTICE " ");
|
||||
printk(" %08lx", *stack++);
|
||||
}
|
||||
printk("\n");
|
||||
|
||||
show_trace(task, stack);
|
||||
}
|
||||
|
@ -568,33 +605,34 @@ EXPORT_SYMBOL(dump_stack);
|
|||
|
||||
void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
|
||||
{
|
||||
if (current->pid) {
|
||||
printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n"
|
||||
KERN_EMERG "\n");
|
||||
printk(KERN_EMERG "COMM=%s PID=%d\n",
|
||||
current->comm, current->pid);
|
||||
char buf [150];
|
||||
|
||||
if (!oops_in_progress) {
|
||||
if (current->pid && current->mm) {
|
||||
printk(KERN_NOTICE "\n" KERN_NOTICE "CURRENT PROCESS:\n");
|
||||
printk(KERN_NOTICE "COMM=%s PID=%d\n",
|
||||
current->comm, current->pid);
|
||||
|
||||
printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
|
||||
KERN_NOTICE "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
|
||||
KERN_NOTICE "\n",
|
||||
(void *)current->mm->start_code,
|
||||
(void *)current->mm->end_code,
|
||||
(void *)current->mm->start_data,
|
||||
(void *)current->mm->end_data,
|
||||
(void *)current->mm->end_data,
|
||||
(void *)current->mm->brk,
|
||||
(void *)current->mm->start_stack);
|
||||
} else {
|
||||
printk (KERN_NOTICE "\n" KERN_NOTICE
|
||||
"No Valid pid - Either things are really messed up,"
|
||||
" or you are in the kernel\n");
|
||||
}
|
||||
} else {
|
||||
printk
|
||||
(KERN_EMERG "\n" KERN_EMERG
|
||||
"No Valid pid - Either things are really messed up,"
|
||||
" or you are in the kernel\n");
|
||||
printk(KERN_NOTICE "Kernel or interrupt exception\n");
|
||||
}
|
||||
|
||||
if (current->mm) {
|
||||
printk(KERN_EMERG "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
|
||||
KERN_EMERG "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
|
||||
KERN_EMERG "\n",
|
||||
(void *)current->mm->start_code,
|
||||
(void *)current->mm->end_code,
|
||||
(void *)current->mm->start_data,
|
||||
(void *)current->mm->end_data,
|
||||
(void *)current->mm->end_data,
|
||||
(void *)current->mm->brk,
|
||||
(void *)current->mm->start_stack);
|
||||
}
|
||||
|
||||
printk(KERN_EMERG "return address: [0x%p]; contents of:", retaddr);
|
||||
if (retaddr != 0 && retaddr <= (void *)physical_mem_end
|
||||
if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end
|
||||
#if L1_CODE_LENGTH != 0
|
||||
/* FIXME: Copy the code out of L1 Instruction SRAM through dma
|
||||
memcpy. */
|
||||
|
@ -604,18 +642,20 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
|
|||
) {
|
||||
int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32;
|
||||
unsigned short x = 0;
|
||||
printk(KERN_NOTICE "return address: [0x%p]; contents of:", retaddr);
|
||||
for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) {
|
||||
if (!(i & 0xF))
|
||||
printk("\n" KERN_EMERG "0x%08x: ", i);
|
||||
printk("\n" KERN_NOTICE "0x%08x: ", i);
|
||||
|
||||
if (get_user(x, (unsigned short *)i))
|
||||
break;
|
||||
#ifndef CONFIG_DEBUG_HWERR
|
||||
/* If one of the last few instructions was a STI
|
||||
* it is likely that the error occured awhile ago
|
||||
* and we just noticed
|
||||
* and we just noticed. This only happens in kernel
|
||||
* context, which should mean an oops is happening
|
||||
*/
|
||||
if (x >= 0x0040 && x <= 0x0047 && i <= 0)
|
||||
if (oops_in_progress && x >= 0x0040 && x <= 0x0047 && i <= 0)
|
||||
panic("\n\nWARNING : You should reconfigure"
|
||||
" the kernel to turn on\n"
|
||||
" 'Hardware error interrupt"
|
||||
|
@ -628,56 +668,60 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
|
|||
else
|
||||
printk(" %04x ", x);
|
||||
}
|
||||
printk("\n" KERN_EMERG "\n");
|
||||
printk("\n");
|
||||
} else
|
||||
printk(KERN_EMERG
|
||||
printk("\n" KERN_NOTICE
|
||||
"Cannot look at the [PC] for it is"
|
||||
"in unreadable L1 SRAM - sorry\n");
|
||||
" in unreadable memory - sorry\n");
|
||||
|
||||
printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n");
|
||||
printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
|
||||
(long)fp->seqstat, fp->ipend, fp->syscfg);
|
||||
|
||||
printk(KERN_EMERG
|
||||
"RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n",
|
||||
fp->rete, fp->retn, fp->retx, fp->rets);
|
||||
printk(KERN_EMERG "IPEND: %04lx SYSCFG: %04lx\n",
|
||||
fp->ipend, fp->syscfg);
|
||||
printk(KERN_EMERG "SEQSTAT: %08lx SP: %08lx\n",
|
||||
(long)fp->seqstat, (long)fp);
|
||||
printk(KERN_EMERG "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
|
||||
fp->r0, fp->r1, fp->r2, fp->r3);
|
||||
printk(KERN_EMERG "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
|
||||
fp->r4, fp->r5, fp->r6, fp->r7);
|
||||
printk(KERN_EMERG "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
|
||||
fp->p0, fp->p1, fp->p2, fp->p3);
|
||||
printk(KERN_EMERG
|
||||
"P4: %08lx P5: %08lx FP: %08lx\n",
|
||||
fp->p4, fp->p5, fp->fp);
|
||||
printk(KERN_EMERG
|
||||
"A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
|
||||
fp->a0w, fp->a0x, fp->a1w, fp->a1x);
|
||||
decode_address(buf, fp->rete);
|
||||
printk(KERN_NOTICE " RETE: %s\n", buf);
|
||||
decode_address(buf, fp->retn);
|
||||
printk(KERN_NOTICE " RETN: %s\n", buf);
|
||||
decode_address(buf, fp->retx);
|
||||
printk(KERN_NOTICE " RETX: %s\n", buf);
|
||||
decode_address(buf, fp->rets);
|
||||
printk(KERN_NOTICE " RETS: %s\n", buf);
|
||||
|
||||
printk(KERN_EMERG "LB0: %08lx LT0: %08lx LC0: %08lx\n",
|
||||
fp->lb0, fp->lt0, fp->lc0);
|
||||
printk(KERN_EMERG "LB1: %08lx LT1: %08lx LC1: %08lx\n",
|
||||
fp->lb1, fp->lt1, fp->lc1);
|
||||
printk(KERN_EMERG "B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n",
|
||||
fp->b0, fp->l0, fp->m0, fp->i0);
|
||||
printk(KERN_EMERG "B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n",
|
||||
fp->b1, fp->l1, fp->m1, fp->i1);
|
||||
printk(KERN_EMERG "B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n",
|
||||
fp->b2, fp->l2, fp->m2, fp->i2);
|
||||
printk(KERN_EMERG "B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n",
|
||||
fp->b3, fp->l3, fp->m3, fp->i3);
|
||||
|
||||
printk(KERN_EMERG "\n" KERN_EMERG "USP: %08lx ASTAT: %08lx\n",
|
||||
rdusp(), fp->astat);
|
||||
if ((long)fp->seqstat & SEQSTAT_EXCAUSE) {
|
||||
printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n",
|
||||
(void *)bfin_read_DCPLB_FAULT_ADDR());
|
||||
printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n",
|
||||
(void *)bfin_read_ICPLB_FAULT_ADDR());
|
||||
decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
|
||||
printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
|
||||
decode_address(buf, bfin_read_ICPLB_FAULT_ADDR());
|
||||
printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
|
||||
}
|
||||
|
||||
printk("\n\n");
|
||||
printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
|
||||
printk(KERN_NOTICE " R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
|
||||
fp->r0, fp->r1, fp->r2, fp->r3);
|
||||
printk(KERN_NOTICE " R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
|
||||
fp->r4, fp->r5, fp->r6, fp->r7);
|
||||
printk(KERN_NOTICE " P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n",
|
||||
fp->p0, fp->p1, fp->p2, fp->p3);
|
||||
printk(KERN_NOTICE " P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n",
|
||||
fp->p4, fp->p5, fp->fp, (long)fp);
|
||||
printk(KERN_NOTICE " LB0: %08lx LT0: %08lx LC0: %08lx\n",
|
||||
fp->lb0, fp->lt0, fp->lc0);
|
||||
printk(KERN_NOTICE " LB1: %08lx LT1: %08lx LC1: %08lx\n",
|
||||
fp->lb1, fp->lt1, fp->lc1);
|
||||
printk(KERN_NOTICE " B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n",
|
||||
fp->b0, fp->l0, fp->m0, fp->i0);
|
||||
printk(KERN_NOTICE " B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n",
|
||||
fp->b1, fp->l1, fp->m1, fp->i1);
|
||||
printk(KERN_NOTICE " B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n",
|
||||
fp->b2, fp->l2, fp->m2, fp->i2);
|
||||
printk(KERN_NOTICE " B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n",
|
||||
fp->b3, fp->l3, fp->m3, fp->i3);
|
||||
printk(KERN_NOTICE "A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
|
||||
fp->a0w, fp->a0x, fp->a1w, fp->a1x);
|
||||
|
||||
printk(KERN_NOTICE "USP : %08lx ASTAT: %08lx\n",
|
||||
rdusp(), fp->astat);
|
||||
|
||||
printk(KERN_NOTICE "\n");
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
|
||||
|
@ -752,6 +796,8 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
|
|||
break;
|
||||
}
|
||||
|
||||
oops_in_progress = 1;
|
||||
|
||||
printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR());
|
||||
printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR());
|
||||
dump_bfin_regs(fp, (void *)fp->retx);
|
||||
|
|
|
@ -172,9 +172,14 @@ SECTIONS
|
|||
__ebss_b_l1 = .;
|
||||
}
|
||||
|
||||
___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
|
||||
/* Force trailing alignment of our init section so that when we
|
||||
* free our init memory, we don't leave behind a partial page.
|
||||
*/
|
||||
. = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
|
||||
. = ALIGN(PAGE_SIZE);
|
||||
___init_end = .;
|
||||
|
||||
.bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
___bss_start = .;
|
||||
|
|
|
@ -41,9 +41,11 @@
|
|||
#include <linux/irq.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/usb_sl811.h>
|
||||
#include <asm/cplb.h>
|
||||
#include <asm/dma.h>
|
||||
#include <asm/bfin5xx_spi.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/nand.h>
|
||||
#include <linux/spi/ad7877.h>
|
||||
|
||||
/*
|
||||
|
@ -102,6 +104,53 @@ void __exit bfin_isp1761_exit(void)
|
|||
arch_initcall(bfin_isp1761_init);
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
|
||||
static struct mtd_partition partition_info[] = {
|
||||
{
|
||||
.name = "Linux Kernel",
|
||||
.offset = 0,
|
||||
.size = 4 * SIZE_1M,
|
||||
},
|
||||
{
|
||||
.name = "File System",
|
||||
.offset = 4 * SIZE_1M,
|
||||
.size = (256 - 4) * SIZE_1M,
|
||||
},
|
||||
};
|
||||
|
||||
static struct bf5xx_nand_platform bf5xx_nand_platform = {
|
||||
.page_size = NFC_PG_SIZE_256,
|
||||
.data_width = NFC_NWIDTH_8,
|
||||
.partitions = partition_info,
|
||||
.nr_partitions = ARRAY_SIZE(partition_info),
|
||||
.rd_dly = 3,
|
||||
.wr_dly = 3,
|
||||
};
|
||||
|
||||
static struct resource bf5xx_nand_resources[] = {
|
||||
{
|
||||
.start = NFC_CTL,
|
||||
.end = NFC_DATA_RD + 2,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
{
|
||||
.start = CH_NFC,
|
||||
.end = CH_NFC,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device bf5xx_nand_device = {
|
||||
.name = "bf5xx-nand",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
|
||||
.resource = bf5xx_nand_resources,
|
||||
.dev = {
|
||||
.platform_data = &bf5xx_nand_platform,
|
||||
},
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
|
||||
static struct resource bfin_pcmcia_cf_resources[] = {
|
||||
{
|
||||
|
@ -650,6 +699,10 @@ static struct platform_device bfin_pata_device = {
|
|||
#endif
|
||||
|
||||
static struct platform_device *stamp_devices[] __initdata = {
|
||||
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
|
||||
&bf5xx_nand_device,
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
|
||||
&bfin_pcmcia_cf_device,
|
||||
#endif
|
||||
|
|
345
arch/blackfin/mach-bf533/boards/H8606.c
Normal file
345
arch/blackfin/mach-bf533/boards/H8606.c
Normal file
|
@ -0,0 +1,345 @@
|
|||
/*
|
||||
* File: arch/blackfin/mach-bf533/H8606.c
|
||||
* Based on: arch/blackfin/mach-bf533/stamp.c
|
||||
* Author: Javier Herrero <jherrero@hvsistemas.es>
|
||||
*
|
||||
* Created: 2007
|
||||
* Description: Board Info File for the HV Sistemas H8606 board
|
||||
*
|
||||
* Modified:
|
||||
* Copyright 2005 National ICT Australia (NICTA)
|
||||
* Copyright 2004-2006 Analog Devices Inc
|
||||
* Copyright 2007 HV Sistemas S.L.
|
||||
*
|
||||
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, see the file COPYING, or write
|
||||
* to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/flash.h>
|
||||
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
|
||||
#include <linux/usb_isp1362.h>
|
||||
#endif
|
||||
#include <linux/pata_platform.h>
|
||||
#include <linux/irq.h>
|
||||
#include <asm/dma.h>
|
||||
#include <asm/bfin5xx_spi.h>
|
||||
#include <asm/reboot.h>
|
||||
|
||||
/*
|
||||
* Name the Board for the /proc/cpuinfo
|
||||
*/
|
||||
const char bfin_board_name[] = "HV Sistemas H8606";
|
||||
|
||||
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_BFIN_MODULE)
|
||||
static struct platform_device rtc_device = {
|
||||
.name = "rtc-bfin",
|
||||
.id = -1,
|
||||
};
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Driver needs to know address, irq and flag pin.
|
||||
*/
|
||||
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
|
||||
static struct resource dm9000_resources[] = {
|
||||
[0] = {
|
||||
.start = 0x20300000,
|
||||
.end = 0x20300000 + 8,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = IRQ_PF10,
|
||||
.end = IRQ_PF10,
|
||||
.flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device dm9000_device = {
|
||||
.id = 0,
|
||||
.name = "dm9000",
|
||||
.resource = dm9000_resources,
|
||||
.num_resources = ARRAY_SIZE(dm9000_resources),
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
|
||||
static struct resource smc91x_resources[] = {
|
||||
{
|
||||
.name = "smc91x-regs",
|
||||
.start = 0x20300300,
|
||||
.end = 0x20300300 + 16,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.start = IRQ_PROG_INTB,
|
||||
.end = IRQ_PROG_INTB,
|
||||
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
||||
}, {
|
||||
/*
|
||||
* denotes the flag pin and is used directly if
|
||||
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
|
||||
*/
|
||||
.start = IRQ_PF7,
|
||||
.end = IRQ_PF7,
|
||||
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device smc91x_device = {
|
||||
.name = "smc91x",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(smc91x_resources),
|
||||
.resource = smc91x_resources,
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
|
||||
static struct resource net2272_bfin_resources[] = {
|
||||
{
|
||||
.start = 0x20300000,
|
||||
.end = 0x20300000 + 0x100,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.start = IRQ_PF10,
|
||||
.end = IRQ_PF10,
|
||||
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device net2272_bfin_device = {
|
||||
.name = "net2272",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(net2272_bfin_resources),
|
||||
.resource = net2272_bfin_resources,
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
||||
/* all SPI peripherals info goes here */
|
||||
|
||||
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
|
||||
static struct mtd_partition bfin_spi_flash_partitions[] = {
|
||||
{
|
||||
.name = "bootloader",
|
||||
.size = 0x00060000,
|
||||
.offset = 0,
|
||||
.mask_flags = MTD_CAP_ROM
|
||||
}, {
|
||||
.name = "kernel",
|
||||
.size = 0x100000,
|
||||
.offset = 0x60000
|
||||
}, {
|
||||
.name = "file system",
|
||||
.size = 0x6a0000,
|
||||
.offset = 0x00160000,
|
||||
}
|
||||
};
|
||||
|
||||
static struct flash_platform_data bfin_spi_flash_data = {
|
||||
.name = "m25p80",
|
||||
.parts = bfin_spi_flash_partitions,
|
||||
.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
|
||||
.type = "m25p64",
|
||||
};
|
||||
|
||||
/* SPI flash chip (m25p64) */
|
||||
static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
||||
.enable_dma = 0, /* use dma transfer with this chip*/
|
||||
.bits_per_word = 8,
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
/* SPI ADC chip */
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.ctl_reg = 0x1000,
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
.bits_per_word = 16,
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
|
||||
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
|
||||
.ctl_reg = 0x1000,
|
||||
.enable_dma = 0,
|
||||
.bits_per_word = 16,
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_PBX)
|
||||
static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
|
||||
.ctl_reg = 0x1c04,
|
||||
.enable_dma = 0,
|
||||
.bits_per_word = 8,
|
||||
.cs_change_per_word = 1,
|
||||
};
|
||||
#endif
|
||||
|
||||
/* Notice: for blackfin, the speed_hz is the value of register
|
||||
* SPI_BAUD, not the real baudrate */
|
||||
static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
|
||||
{
|
||||
/* the modalias must be the same as spi device driver name */
|
||||
.modalias = "m25p80", /* Name of spi_driver for this device */
|
||||
/* this value is the baudrate divisor */
|
||||
.max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */
|
||||
.bus_num = 0, /* Framework bus number */
|
||||
.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
|
||||
.platform_data = &bfin_spi_flash_data,
|
||||
.controller_data = &spi_flash_chip_info,
|
||||
.mode = SPI_MODE_3,
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 4, /* actual baudrate is SCLK/(2xspeed_hz) */
|
||||
.bus_num = 1, /* Framework bus number */
|
||||
.chip_select = 1, /* Framework chip select. */
|
||||
.platform_data = NULL, /* No spi_driver specific config */
|
||||
.controller_data = &spi_adc_chip_info,
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
|
||||
{
|
||||
.modalias = "ad1836-spi",
|
||||
.max_speed_hz = 16,
|
||||
.bus_num = 1,
|
||||
.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
|
||||
.controller_data = &ad1836_spi_chip_info,
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_PBX)
|
||||
{
|
||||
.modalias = "fxs-spi",
|
||||
.max_speed_hz = 4,
|
||||
.bus_num = 1,
|
||||
.chip_select = 3,
|
||||
.controller_data = &spi_si3xxx_chip_info,
|
||||
},
|
||||
|
||||
{
|
||||
.modalias = "fxo-spi",
|
||||
.max_speed_hz = 4,
|
||||
.bus_num = 1,
|
||||
.chip_select = 2,
|
||||
.controller_data = &spi_si3xxx_chip_info,
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
/* SPI (0) */
|
||||
static struct resource bfin_spi0_resource[] = {
|
||||
[0] = {
|
||||
.start = SPI0_REGBASE,
|
||||
.end = SPI0_REGBASE + 0xFF,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = CH_SPI,
|
||||
.end = CH_SPI,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
/* SPI controller data */
|
||||
static struct bfin5xx_spi_master bfin_spi0_info = {
|
||||
.num_chipselect = 8,
|
||||
.enable_dma = 1, /* master has the ability to do dma transfer */
|
||||
};
|
||||
|
||||
static struct platform_device bfin_spi0_device = {
|
||||
.name = "bfin-spi",
|
||||
.id = 0, /* Bus number */
|
||||
.num_resources = ARRAY_SIZE(bfin_spi0_resource),
|
||||
.resource = bfin_spi0_resource,
|
||||
.dev = {
|
||||
.platform_data = &bfin_spi0_info, /* Passed to driver */
|
||||
},
|
||||
};
|
||||
#endif /* spi master and devices */
|
||||
|
||||
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
|
||||
static struct platform_device bfin_fb_device = {
|
||||
.name = "bf537-fb",
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
|
||||
static struct resource bfin_uart_resources[] = {
|
||||
{
|
||||
.start = 0xFFC00400,
|
||||
.end = 0xFFC004FF,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device bfin_uart_device = {
|
||||
.name = "bfin-uart",
|
||||
.id = 1,
|
||||
.num_resources = ARRAY_SIZE(bfin_uart_resources),
|
||||
.resource = bfin_uart_resources,
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct platform_device *stamp_devices[] __initdata = {
|
||||
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
|
||||
&rtc_device,
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
|
||||
&dm9000_device,
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
|
||||
&smc91x_device,
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
|
||||
&net2272_bfin_device,
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
||||
&bfin_spi0_device,
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
|
||||
&bfin_uart_device,
|
||||
#endif
|
||||
};
|
||||
|
||||
static int __init H8606_init(void)
|
||||
{
|
||||
printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
|
||||
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
|
||||
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
|
||||
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
||||
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
arch_initcall(H8606_init);
|
|
@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_BOARD) += generic_board.o
|
|||
obj-$(CONFIG_BFIN533_STAMP) += stamp.o
|
||||
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
|
||||
obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
|
||||
obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o
|
||||
|
|
|
@ -46,7 +46,7 @@ const char bfin_board_name[] = "Bluetechnix CM BF533";
|
|||
|
||||
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
||||
/* all SPI peripherals info goes here */
|
||||
|
||||
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
|
||||
static struct mtd_partition bfin_spi_flash_partitions[] = {
|
||||
{
|
||||
.name = "bootloader",
|
||||
|
@ -76,12 +76,15 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
|
|||
.enable_dma = 0, /* use dma transfer with this chip*/
|
||||
.bits_per_word = 8,
|
||||
};
|
||||
#endif
|
||||
|
||||
/* SPI ADC chip */
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
static struct bfin5xx_spi_chip spi_adc_chip_info = {
|
||||
.enable_dma = 1, /* use dma transfer with this chip*/
|
||||
.bits_per_word = 16,
|
||||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
|
||||
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
|
||||
|
@ -90,7 +93,15 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
|
|||
};
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
|
||||
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
|
||||
.enable_dma = 1,
|
||||
.bits_per_word = 8,
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
||||
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
|
||||
{
|
||||
/* the modalias must be the same as spi device driver name */
|
||||
.modalias = "m25p80", /* Name of spi_driver for this device */
|
||||
|
@ -100,7 +111,11 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
|||
.platform_data = &bfin_spi_flash_data,
|
||||
.controller_data = &spi_flash_chip_info,
|
||||
.mode = SPI_MODE_3,
|
||||
}, {
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
|
||||
{
|
||||
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
|
||||
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
|
||||
.bus_num = 0, /* Framework bus number */
|
||||
|
@ -108,6 +123,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
|||
.platform_data = NULL, /* No spi_driver specific config */
|
||||
.controller_data = &spi_adc_chip_info,
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
|
||||
{
|
||||
.modalias = "ad1836-spi",
|
||||
|
@ -117,6 +134,27 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
|||
.controller_data = &ad1836_spi_chip_info,
|
||||
},
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
|
||||
{
|
||||
.modalias = "spi_mmc_dummy",
|
||||
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
.platform_data = NULL,
|
||||
.controller_data = &spi_mmc_chip_info,
|
||||
.mode = SPI_MODE_3,
|
||||
},
|
||||
{
|
||||
.modalias = "spi_mmc",
|
||||
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
|
||||
.bus_num = 0,
|
||||
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
|
||||
.platform_data = NULL,
|
||||
.controller_data = &spi_mmc_chip_info,
|
||||
.mode = SPI_MODE_3,
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
/* SPI (0) */
|
||||
|
|
|
@ -218,7 +218,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
|||
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
|
||||
{
|
||||
.modalias = "spi_mmc_dummy",
|
||||
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
|
||||
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
.platform_data = NULL,
|
||||
|
@ -227,7 +227,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
|||
},
|
||||
{
|
||||
.modalias = "spi_mmc",
|
||||
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
|
||||
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
|
||||
.bus_num = 0,
|
||||
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
|
||||
.platform_data = NULL,
|
||||
|
|
|
@ -281,8 +281,8 @@ static struct resource net2272_bfin_resources[] = {
|
|||
.end = 0x20200000 + 0x100,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.start = IRQ_PF7,
|
||||
.end = IRQ_PF7,
|
||||
.start = IRQ_PH14,
|
||||
.end = IRQ_PH14,
|
||||
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
||||
},
|
||||
};
|
||||
|
|
|
@ -450,7 +450,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
|||
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
|
||||
{
|
||||
.modalias = "spi_mmc_dummy",
|
||||
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
|
||||
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
.platform_data = NULL,
|
||||
|
@ -459,7 +459,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
|||
},
|
||||
{
|
||||
.modalias = "spi_mmc",
|
||||
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
|
||||
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
|
||||
.bus_num = 0,
|
||||
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
|
||||
.platform_data = NULL,
|
||||
|
@ -612,7 +612,7 @@ static struct platform_device bfin_sport1_uart_device = {
|
|||
|
||||
static struct pata_platform_info bfin_pata_platform_data = {
|
||||
.ioport_shift = 1,
|
||||
.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
|
||||
.irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
|
||||
};
|
||||
|
||||
static struct resource bfin_pata_resources[] = {
|
||||
|
|
|
@ -917,7 +917,7 @@ ENTRY(_ex_table)
|
|||
.long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
|
||||
.long _ex_replaceable /* 0x02 - User Defined */
|
||||
.long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
|
||||
.long _ex_replaceable /* 0x04 - User Defined */
|
||||
.long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */
|
||||
.long _ex_replaceable /* 0x05 - User Defined */
|
||||
.long _ex_replaceable /* 0x06 - User Defined */
|
||||
.long _ex_replaceable /* 0x07 - User Defined */
|
||||
|
|
|
@ -80,6 +80,7 @@ extern int atomic_sub32(void);
|
|||
extern int atomic_ior32(void);
|
||||
extern int atomic_and32(void);
|
||||
extern int atomic_xor32(void);
|
||||
extern void safe_user_instruction(void);
|
||||
extern void sigreturn_stub(void);
|
||||
|
||||
extern void *l1_data_A_sram_alloc(size_t);
|
||||
|
|
|
@ -17,4 +17,6 @@
|
|||
|
||||
#define ATOMIC_SEQS_END 0x480
|
||||
|
||||
#define FIXED_CODE_END 0x480
|
||||
#define SAFE_USER_INSTRUCTION 0x480
|
||||
|
||||
#define FIXED_CODE_END 0x490
|
||||
|
|
|
@ -197,6 +197,8 @@ uint32_t get_gptimer_period (int timer_id);
|
|||
uint32_t get_gptimer_count (int timer_id);
|
||||
uint16_t get_gptimer_intr (int timer_id);
|
||||
void clear_gptimer_intr (int timer_id);
|
||||
uint16_t get_gptimer_over (int timer_id);
|
||||
void clear_gptimer_over (int timer_id);
|
||||
void set_gptimer_config (int timer_id, uint16_t config);
|
||||
uint16_t get_gptimer_config (int timer_id);
|
||||
void set_gptimer_pulse_hi (int timer_id);
|
||||
|
|
|
@ -1718,55 +1718,55 @@
|
|||
|
||||
/* Bit masks for HOST_CONTROL */
|
||||
|
||||
#define HOST_EN 0x1 /* Host Enable */
|
||||
#define nHOST_EN 0x0
|
||||
#define HOST_END 0x2 /* Host Endianess */
|
||||
#define nHOST_END 0x0
|
||||
#define DATA_SIZE 0x4 /* Data Size */
|
||||
#define nDATA_SIZE 0x0
|
||||
#define HOST_RST 0x8 /* Host Reset */
|
||||
#define nHOST_RST 0x0
|
||||
#define HRDY_OVR 0x20 /* Host Ready Override */
|
||||
#define nHRDY_OVR 0x0
|
||||
#define INT_MODE 0x40 /* Interrupt Mode */
|
||||
#define nINT_MODE 0x0
|
||||
#define BT_EN 0x80 /* Bus Timeout Enable */
|
||||
#define nBT_EN 0x0
|
||||
#define EHW 0x100 /* Enable Host Write */
|
||||
#define nEHW 0x0
|
||||
#define EHR 0x200 /* Enable Host Read */
|
||||
#define nEHR 0x0
|
||||
#define BDR 0x400 /* Burst DMA Requests */
|
||||
#define nBDR 0x0
|
||||
#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */
|
||||
#define HOST_CNTR_nHOST_EN 0x0
|
||||
#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */
|
||||
#define HOST_CNTR_nHOST_END 0x0
|
||||
#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */
|
||||
#define HOST_CNTR_nDATA_SIZE 0x0
|
||||
#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */
|
||||
#define HOST_CNTR_nHOST_RST 0x0
|
||||
#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */
|
||||
#define HOST_CNTR_nHRDY_OVR 0x0
|
||||
#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */
|
||||
#define HOST_CNTR_nINT_MODE 0x0
|
||||
#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */
|
||||
#define HOST_CNTR_ nBT_EN 0x0
|
||||
#define HOST_CNTR_EHW 0x100 /* Enable Host Write */
|
||||
#define HOST_CNTR_nEHW 0x0
|
||||
#define HOST_CNTR_EHR 0x200 /* Enable Host Read */
|
||||
#define HOST_CNTR_nEHR 0x0
|
||||
#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */
|
||||
#define HOST_CNTR_nBDR 0x0
|
||||
|
||||
/* Bit masks for HOST_STATUS */
|
||||
|
||||
#define READY 0x1 /* DMA Ready */
|
||||
#define nREADY 0x0
|
||||
#define FIFOFULL 0x2 /* FIFO Full */
|
||||
#define nFIFOFULL 0x0
|
||||
#define FIFOEMPTY 0x4 /* FIFO Empty */
|
||||
#define nFIFOEMPTY 0x0
|
||||
#define COMPLETE 0x8 /* DMA Complete */
|
||||
#define nCOMPLETE 0x0
|
||||
#define HSHK 0x10 /* Host Handshake */
|
||||
#define nHSHK 0x0
|
||||
#define TIMEOUT 0x20 /* Host Timeout */
|
||||
#define nTIMEOUT 0x0
|
||||
#define HIRQ 0x40 /* Host Interrupt Request */
|
||||
#define nHIRQ 0x0
|
||||
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
|
||||
#define nALLOW_CNFG 0x0
|
||||
#define DMA_DIR 0x100 /* DMA Direction */
|
||||
#define nDMA_DIR 0x0
|
||||
#define BTE 0x200 /* Bus Timeout Enabled */
|
||||
#define nBTE 0x0
|
||||
#define HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
|
||||
#define nHOSTRD_DONE 0x0
|
||||
#define HOST_STAT_READY 0x1 /* DMA Ready */
|
||||
#define HOST_STAT_nREADY 0x0
|
||||
#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */
|
||||
#define HOST_STAT_nFIFOFULL 0x0
|
||||
#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */
|
||||
#define HOST_STAT_nFIFOEMPTY 0x0
|
||||
#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */
|
||||
#define HOST_STAT_nCOMPLETE 0x0
|
||||
#define HOST_STAT_HSHK 0x10 /* Host Handshake */
|
||||
#define HOST_STAT_nHSHK 0x0
|
||||
#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */
|
||||
#define HOST_STAT_nTIMEOUT 0x0
|
||||
#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */
|
||||
#define HOST_STAT_nHIRQ 0x0
|
||||
#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */
|
||||
#define HOST_STAT_nALLOW_CNFG 0x0
|
||||
#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */
|
||||
#define HOST_STAT_nDMA_DIR 0x0
|
||||
#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */
|
||||
#define HOST_STAT_nBTE 0x0
|
||||
#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
|
||||
#define HOST_STAT_nHOSTRD_DONE 0x0
|
||||
|
||||
/* Bit masks for HOST_TIMEOUT */
|
||||
|
||||
#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
|
||||
#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */
|
||||
|
||||
/* Bit masks for CNT_CONFIG */
|
||||
|
||||
|
|
|
@ -35,7 +35,6 @@
|
|||
#define MAX_BLACKFIN_DMA_CHANNEL 16
|
||||
|
||||
#define CH_PPI 0 /* PPI receive/transmit or NFC */
|
||||
#define CH_NFC 0 /* PPI receive/transmit or NFC */
|
||||
#define CH_EMAC_RX 1 /* Ethernet MAC receive or HOSTDP */
|
||||
#define CH_EMAC_HOSTDP 1 /* Ethernet MAC receive or HOSTDP */
|
||||
#define CH_EMAC_TX 2 /* Ethernet MAC transmit or NFC */
|
||||
|
@ -54,6 +53,12 @@
|
|||
#define CH_MEM_STREAM1_DEST 14 /* TX */
|
||||
#define CH_MEM_STREAM1_SRC 15 /* RX */
|
||||
|
||||
#if defined(CONFIG_BF527_NAND_D_PORTF)
|
||||
#define CH_NFC CH_PPI /* PPI receive/transmit or NFC */
|
||||
#elif defined(CONFIG_BF527_NAND_D_PORTH)
|
||||
#define CH_NFC CH_EMAC_TX /* PPI receive/transmit or NFC */
|
||||
#endif
|
||||
|
||||
extern int channel2irq(unsigned int channel);
|
||||
extern struct dma_register *base_addr[];
|
||||
|
||||
|
|
|
@ -1671,7 +1671,7 @@
|
|||
/* Bit masks for MXVR_DMAx_CONFIG */
|
||||
|
||||
#define MDMAEN 0x1 /* DMA Channel Enable */
|
||||
#define DD 0x2 /* DMA Channel Direction */
|
||||
#define DMADD 0x2 /* DMA Channel Direction */
|
||||
#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */
|
||||
#define LCHAN 0x3c0 /* DMA Channel Logical Channel */
|
||||
#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */
|
||||
|
|
|
@ -2252,6 +2252,13 @@
|
|||
#define PLL_OFF 0x2 /* Disable PLL */
|
||||
#define DF 0x1 /* Divide Frequency */
|
||||
|
||||
/* SWRST Masks */
|
||||
#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
|
||||
#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
|
||||
#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
|
||||
#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
|
||||
#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
|
||||
|
||||
/* Bit masks for PLL_STAT */
|
||||
|
||||
#define PLL_LOCKED 0x20 /* PLL Locked Status */
|
||||
|
|
|
@ -267,4 +267,18 @@
|
|||
#define P_AMC_BG (P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0))
|
||||
#define P_AMC_BGH (P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0))
|
||||
|
||||
|
||||
#define P_NAND_D0 (P_DONTCARE)
|
||||
#define P_NAND_D1 (P_DONTCARE)
|
||||
#define P_NAND_D2 (P_DONTCARE)
|
||||
#define P_NAND_D3 (P_DONTCARE)
|
||||
#define P_NAND_D4 (P_DONTCARE)
|
||||
#define P_NAND_D5 (P_DONTCARE)
|
||||
#define P_NAND_D6 (P_DONTCARE)
|
||||
#define P_NAND_D7 (P_DONTCARE)
|
||||
#define P_NAND_WE (P_DONTCARE)
|
||||
#define P_NAND_RE (P_DONTCARE)
|
||||
#define P_NAND_CLE (P_DONTCARE)
|
||||
#define P_NAND_ALE (P_DONTCARE)
|
||||
|
||||
#endif /* _MACH_PORTMUX_H_ */
|
||||
|
|
|
@ -55,6 +55,9 @@
|
|||
/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
|
||||
#define SWRST SICA_SWRST
|
||||
#define SYSCR SICA_SYSCR
|
||||
#define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
|
||||
#define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A)
|
||||
#define RESET_SOFTWARE (SWRST_OCCURRED)
|
||||
|
||||
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
|
||||
#define SICA_SWRST 0xFFC00100 /* Software Reset register */
|
||||
|
|
Loading…
Reference in a new issue