i2c-designware: Add support for Designware core behind PCI devices.
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>hifive-unleashed-5.1
Dirk Brandewie
Ben Dooks
parent
f3fa9f3da5
commit
fe20ff5c7e
|
|
@ -360,6 +360,16 @@ config I2C_DESIGNWARE_PLATFORM
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-designware-platform.
|
||||
|
||||
config I2C_DESIGNWARE_PCI
|
||||
tristate "Synopsys DesignWare PCI"
|
||||
depends on PCI
|
||||
help
|
||||
If you say yes to this option, support will be included for the
|
||||
Synopsys DesignWare I2C adapter. Only master mode is supported.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-designware-pci.
|
||||
|
||||
config I2C_GPIO
|
||||
tristate "GPIO-based bitbanging I2C"
|
||||
depends on GENERIC_GPIO
|
||||
|
|
|
|||
|
|
@ -35,6 +35,8 @@ obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
|
|||
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
|
||||
obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
|
||||
i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
|
||||
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
|
||||
i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
|
||||
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
|
||||
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
|
||||
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
|
||||
|
|
|
|||
|
|
@ -68,6 +68,7 @@ struct dw_i2c_dev {
|
|||
struct mutex lock;
|
||||
struct clk *clk;
|
||||
u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev);
|
||||
struct dw_pci_controller *controller;
|
||||
int cmd_err;
|
||||
struct i2c_msg *msgs;
|
||||
int msgs_num;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,316 @@
|
|||
/*
|
||||
* Synopsys DesignWare I2C adapter driver (master only).
|
||||
*
|
||||
* Based on the TI DAVINCI I2C adapter driver.
|
||||
*
|
||||
* Copyright (C) 2006 Texas Instruments.
|
||||
* Copyright (C) 2007 MontaVista Software Inc.
|
||||
* Copyright (C) 2009 Provigent Ltd.
|
||||
* Copyright (C) 2011 Intel corporation.
|
||||
*
|
||||
* ----------------------------------------------------------------------------
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
* ----------------------------------------------------------------------------
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/pci.h>
|
||||
#include "i2c-designware-core.h"
|
||||
|
||||
#define DRIVER_NAME "i2c-designware-pci"
|
||||
|
||||
enum dw_pci_ctl_id_t {
|
||||
moorestown_0,
|
||||
moorestown_1,
|
||||
moorestown_2,
|
||||
|
||||
medfield_0,
|
||||
medfield_1,
|
||||
medfield_2,
|
||||
medfield_3,
|
||||
medfield_4,
|
||||
medfield_5,
|
||||
};
|
||||
|
||||
struct dw_pci_controller {
|
||||
u32 bus_num;
|
||||
u32 bus_cfg;
|
||||
u32 tx_fifo_depth;
|
||||
u32 rx_fifo_depth;
|
||||
u32 clk_khz;
|
||||
};
|
||||
|
||||
#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \
|
||||
DW_IC_CON_SLAVE_DISABLE | \
|
||||
DW_IC_CON_RESTART_EN)
|
||||
|
||||
static struct dw_pci_controller dw_pci_controllers[] = {
|
||||
[moorestown_0] = {
|
||||
.bus_num = 0,
|
||||
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
|
||||
.tx_fifo_depth = 32,
|
||||
.rx_fifo_depth = 32,
|
||||
.clk_khz = 25000,
|
||||
},
|
||||
[moorestown_1] = {
|
||||
.bus_num = 1,
|
||||
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
|
||||
.tx_fifo_depth = 32,
|
||||
.rx_fifo_depth = 32,
|
||||
.clk_khz = 25000,
|
||||
},
|
||||
[moorestown_2] = {
|
||||
.bus_num = 2,
|
||||
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
|
||||
.tx_fifo_depth = 32,
|
||||
.rx_fifo_depth = 32,
|
||||
.clk_khz = 25000,
|
||||
},
|
||||
[medfield_0] = {
|
||||
.bus_num = 0,
|
||||
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
|
||||
.tx_fifo_depth = 32,
|
||||
.rx_fifo_depth = 32,
|
||||
.clk_khz = 25000,
|
||||
},
|
||||
[medfield_1] = {
|
||||
.bus_num = 1,
|
||||
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
|
||||
.tx_fifo_depth = 32,
|
||||
.rx_fifo_depth = 32,
|
||||
.clk_khz = 25000,
|
||||
},
|
||||
[medfield_2] = {
|
||||
.bus_num = 2,
|
||||
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
|
||||
.tx_fifo_depth = 32,
|
||||
.rx_fifo_depth = 32,
|
||||
.clk_khz = 25000,
|
||||
},
|
||||
[medfield_3] = {
|
||||
.bus_num = 3,
|
||||
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
|
||||
.tx_fifo_depth = 32,
|
||||
.rx_fifo_depth = 32,
|
||||
.clk_khz = 25000,
|
||||
},
|
||||
[medfield_4] = {
|
||||
.bus_num = 4,
|
||||
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
|
||||
.tx_fifo_depth = 32,
|
||||
.rx_fifo_depth = 32,
|
||||
.clk_khz = 25000,
|
||||
},
|
||||
[medfield_5] = {
|
||||
.bus_num = 5,
|
||||
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
|
||||
.tx_fifo_depth = 32,
|
||||
.rx_fifo_depth = 32,
|
||||
.clk_khz = 25000,
|
||||
},
|
||||
};
|
||||
static struct i2c_algorithm i2c_dw_algo = {
|
||||
.master_xfer = i2c_dw_xfer,
|
||||
.functionality = i2c_dw_func,
|
||||
};
|
||||
|
||||
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
|
||||
{
|
||||
return dev->controller->clk_khz;
|
||||
}
|
||||
|
||||
static int __devinit i2c_dw_pci_probe(struct pci_dev *pdev,
|
||||
const struct pci_device_id *id)
|
||||
{
|
||||
struct dw_i2c_dev *dev;
|
||||
struct i2c_adapter *adap;
|
||||
unsigned long start, len;
|
||||
void __iomem *base;
|
||||
int r;
|
||||
struct dw_pci_controller *controller;
|
||||
|
||||
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
|
||||
printk(KERN_ERR "dw_i2c_pci_probe: invalid driver data %ld\n",
|
||||
id->driver_data);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
controller = &dw_pci_controllers[id->driver_data];
|
||||
|
||||
r = pci_enable_device(pdev);
|
||||
if (r) {
|
||||
dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
|
||||
r);
|
||||
goto exit;
|
||||
}
|
||||
|
||||
/* Determine the address of the I2C area */
|
||||
start = pci_resource_start(pdev, 0);
|
||||
len = pci_resource_len(pdev, 0);
|
||||
if (!start || len == 0) {
|
||||
dev_err(&pdev->dev, "base address not set\n");
|
||||
r = -ENODEV;
|
||||
goto exit;
|
||||
}
|
||||
|
||||
r = pci_request_region(pdev, 0, DRIVER_NAME);
|
||||
if (r) {
|
||||
dev_err(&pdev->dev, "failed to request I2C region "
|
||||
"0x%lx-0x%lx\n", start,
|
||||
(unsigned long)pci_resource_end(pdev, 0));
|
||||
goto exit;
|
||||
}
|
||||
|
||||
base = ioremap_nocache(start, len);
|
||||
if (!base) {
|
||||
dev_err(&pdev->dev, "I/O memory remapping failed\n");
|
||||
r = -ENOMEM;
|
||||
goto err_release_region;
|
||||
}
|
||||
|
||||
|
||||
dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
|
||||
if (!dev) {
|
||||
r = -ENOMEM;
|
||||
goto err_release_region;
|
||||
}
|
||||
|
||||
init_completion(&dev->cmd_complete);
|
||||
mutex_init(&dev->lock);
|
||||
dev->clk = NULL;
|
||||
dev->controller = controller;
|
||||
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
|
||||
dev->base = base;
|
||||
dev->dev = get_device(&pdev->dev);
|
||||
dev->functionality =
|
||||
I2C_FUNC_I2C |
|
||||
I2C_FUNC_SMBUS_BYTE |
|
||||
I2C_FUNC_SMBUS_BYTE_DATA |
|
||||
I2C_FUNC_SMBUS_WORD_DATA |
|
||||
I2C_FUNC_SMBUS_I2C_BLOCK;
|
||||
dev->master_cfg = controller->bus_cfg;
|
||||
|
||||
pci_set_drvdata(pdev, dev);
|
||||
|
||||
dev->tx_fifo_depth = controller->tx_fifo_depth;
|
||||
dev->rx_fifo_depth = controller->rx_fifo_depth;
|
||||
r = i2c_dw_init(dev);
|
||||
if (r)
|
||||
goto err_iounmap;
|
||||
|
||||
adap = &dev->adapter;
|
||||
i2c_set_adapdata(adap, dev);
|
||||
adap->owner = THIS_MODULE;
|
||||
adap->class = 0;
|
||||
adap->algo = &i2c_dw_algo;
|
||||
adap->dev.parent = &pdev->dev;
|
||||
adap->nr = controller->bus_num;
|
||||
snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d",
|
||||
adap->nr);
|
||||
|
||||
r = request_irq(pdev->irq, i2c_dw_isr, IRQF_SHARED, adap->name, dev);
|
||||
if (r) {
|
||||
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
|
||||
goto err_iounmap;
|
||||
}
|
||||
|
||||
i2c_dw_disable_int(dev);
|
||||
i2c_dw_clear_int(dev);
|
||||
r = i2c_add_numbered_adapter(adap);
|
||||
if (r) {
|
||||
dev_err(&pdev->dev, "failure adding adapter\n");
|
||||
goto err_free_irq;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err_free_irq:
|
||||
free_irq(pdev->irq, dev);
|
||||
err_iounmap:
|
||||
iounmap(dev->base);
|
||||
pci_set_drvdata(pdev, NULL);
|
||||
put_device(&pdev->dev);
|
||||
kfree(dev);
|
||||
err_release_region:
|
||||
pci_release_region(pdev, 0);
|
||||
exit:
|
||||
return r;
|
||||
}
|
||||
|
||||
static void __devexit i2c_dw_pci_remove(struct pci_dev *pdev)
|
||||
{
|
||||
struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
|
||||
|
||||
pci_set_drvdata(pdev, NULL);
|
||||
i2c_del_adapter(&dev->adapter);
|
||||
put_device(&pdev->dev);
|
||||
|
||||
free_irq(dev->irq, dev);
|
||||
kfree(dev);
|
||||
pci_release_region(pdev, 0);
|
||||
}
|
||||
|
||||
/* work with hotplug and coldplug */
|
||||
MODULE_ALIAS("i2c_designware-pci");
|
||||
|
||||
DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
|
||||
/* Moorestown */
|
||||
{ PCI_VDEVICE(INTEL, 0x0802), moorestown_0 },
|
||||
{ PCI_VDEVICE(INTEL, 0x0803), moorestown_1 },
|
||||
{ PCI_VDEVICE(INTEL, 0x0804), moorestown_2 },
|
||||
/* Medfield */
|
||||
{ PCI_VDEVICE(INTEL, 0x0817), medfield_3,},
|
||||
{ PCI_VDEVICE(INTEL, 0x0818), medfield_4 },
|
||||
{ PCI_VDEVICE(INTEL, 0x0819), medfield_5 },
|
||||
{ PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
|
||||
{ PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
|
||||
{ PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
|
||||
{ 0,}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
|
||||
|
||||
static struct pci_driver dw_i2c_driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.id_table = i2_designware_pci_ids,
|
||||
.probe = i2c_dw_pci_probe,
|
||||
.remove = __devexit_p(i2c_dw_pci_remove),
|
||||
};
|
||||
|
||||
static int __init dw_i2c_init_driver(void)
|
||||
{
|
||||
return pci_register_driver(&dw_i2c_driver);
|
||||
}
|
||||
module_init(dw_i2c_init_driver);
|
||||
|
||||
static void __exit dw_i2c_exit_driver(void)
|
||||
{
|
||||
pci_unregister_driver(&dw_i2c_driver);
|
||||
}
|
||||
module_exit(dw_i2c_exit_driver);
|
||||
|
||||
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
|
||||
MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue