diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index e9f70fcdfe80..b520280e33ff 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -8,35 +8,30 @@ Slow Clock controller: Required properties: - compatible : shall be one of the following: - "atmel,at91sam9x5-sckc" or + "atmel,at91sam9x5-sckc", + "atmel,sama5d3-sckc" or "atmel,sama5d4-sckc": at91 SCKC (Slow Clock Controller) - This node contains the slow clock definitions. - - "atmel,at91sam9x5-clk-slow-osc": - at91 slow oscillator - - "atmel,at91sam9x5-clk-slow-rc-osc": - at91 internal slow RC oscillator -- reg : defines the IO memory reserved for the SCKC. -- #size-cells : shall be 0 (reg is used to encode clk id). -- #address-cells : shall be 1 (reg is used to encode clk id). +- #clock-cells : shall be 0. +- clocks : shall be the input parent clock phandle for the clock. +Optional properties: +- atmel,osc-bypass : boolean property. Set this when a clock signal is directly + provided on XIN. For example: - sckc: sckc@fffffe50 { - compatible = "atmel,sama5d3-pmc"; - reg = <0xfffffe50 0x4> - #size-cells = <0>; - #address-cells = <1>; - - /* put at91 slow clocks here */ + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; Power Management Controller (PMC): Required properties: -- compatible : shall be "atmel,-pmc", "syscon": +- compatible : shall be "atmel,-pmc", "syscon" or + "microchip,sam9x60-pmc" can be: at91rm9200, at91sam9260, at91sam9261, at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15, at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5, diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt new file mode 100644 index 000000000000..349808f4fb8c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.txt @@ -0,0 +1,46 @@ +SiFive FU540 PRCI bindings + +On the FU540 family of SoCs, most system-wide clock and reset integration +is via the PRCI IP block. + +Required properties: +- compatible: Should be "sifive,-prci". Only one value is + supported: "sifive,fu540-c000-prci" +- reg: Should describe the PRCI's register target physical address region +- clocks: Should point to the hfclk device tree node and the rtcclk + device tree node. The RTC clock here is not a time-of-day clock, + but is instead a high-stability clock source for system timers + and cycle counters. +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock via the clock ID +macros defined in include/dt-bindings/clock/sifive-fu540-prci.h. +These macros begin with PRCI_CLK_. + +The hfclk and rtcclk nodes are required, and represent physical +crystals or resonators located on the PCB. These nodes should be present +underneath /, rather than /soc. + +Examples: + +/* under /, in PCB-specific DT data */ +hfclk: hfclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + clock-output-names = "hfclk"; +}; +rtcclk: rtcclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <1000000>; + clock-output-names = "rtcclk"; +}; + +/* under /soc, in SoC-specific DT data */ +prci: clock-controller@10000000 { + compatible = "sifive,fu540-c000-prci"; + reg = <0x0 0x10000000 0x0 0x1000>; + clocks = <&hfclk>, <&rtcclk>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt index b240121d2ac9..cfa04b614d8a 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt @@ -11,6 +11,8 @@ Required properties: "st,stm32f42xx-rcc" "st,stm32f469-rcc" "st,stm32f746-rcc" + "st,stm32f769-rcc" + - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below @@ -102,6 +104,10 @@ The secondary index is bound with the following magic numbers: 28 CLK_I2C3 29 CLK_I2C4 30 CLK_LPTIMER (LPTimer1 clock) + 31 CLK_PLL_SRC + 32 CLK_DFSDM1 + 33 CLK_ADFSDM1 + 34 CLK_F769_DSI ) Example: diff --git a/MAINTAINERS b/MAINTAINERS index 2c2fce72e694..562018c00e22 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -960,6 +960,12 @@ F: drivers/iio/adc/ltc2497* X: drivers/iio/*/adjd* F: drivers/staging/iio/*/ad* +ANALOGBITS PLL LIBRARIES +M: Paul Walmsley +S: Supported +F: drivers/clk/analogbits/* +F: include/linux/clk/analogbits* + ANDES ARCHITECTURE M: Greentime Hu M: Vincent Chen diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 03854a9d6f5e..fc1e0cf44995 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 config CLKDEV_LOOKUP bool @@ -304,6 +305,7 @@ config COMMON_CLK_FIXED_MMIO Support for Memory Mapped IO Fixed clocks source "drivers/clk/actions/Kconfig" +source "drivers/clk/analogbits/Kconfig" source "drivers/clk/bcm/Kconfig" source "drivers/clk/hisilicon/Kconfig" source "drivers/clk/imgtec/Kconfig" @@ -316,6 +318,7 @@ source "drivers/clk/mvebu/Kconfig" source "drivers/clk/qcom/Kconfig" source "drivers/clk/renesas/Kconfig" source "drivers/clk/samsung/Kconfig" +source "drivers/clk/sifive/Kconfig" source "drivers/clk/sprd/Kconfig" source "drivers/clk/sunxi/Kconfig" source "drivers/clk/sunxi-ng/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 020ff8d635f2..9ef4305d55e0 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o # please keep this section sorted lexicographically by directory path name obj-y += actions/ +obj-y += analogbits/ obj-$(CONFIG_COMMON_CLK_AT91) += at91/ obj-$(CONFIG_ARCH_ARTPEC) += axis/ obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/ @@ -95,6 +96,7 @@ obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/ obj-y += renesas/ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/ +obj-$(CONFIG_CLK_SIFIVE) += sifive/ obj-$(CONFIG_ARCH_SIRF) += sirf/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/clk/actions/owl-common.h b/drivers/clk/actions/owl-common.h index 5a866a8b913d..c000a431471e 100644 --- a/drivers/clk/actions/owl-common.h +++ b/drivers/clk/actions/owl-common.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ // // OWL common clock driver // diff --git a/drivers/clk/actions/owl-composite.h b/drivers/clk/actions/owl-composite.h index b410ed5bf308..bca38bf8f218 100644 --- a/drivers/clk/actions/owl-composite.h +++ b/drivers/clk/actions/owl-composite.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ // // OWL composite clock driver // diff --git a/drivers/clk/actions/owl-divider.h b/drivers/clk/actions/owl-divider.h index 92d3e3d23967..083be6d80954 100644 --- a/drivers/clk/actions/owl-divider.h +++ b/drivers/clk/actions/owl-divider.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ // // OWL divider clock driver // diff --git a/drivers/clk/actions/owl-factor.h b/drivers/clk/actions/owl-factor.h index f1a7ffe896e1..04b89cbfdccb 100644 --- a/drivers/clk/actions/owl-factor.h +++ b/drivers/clk/actions/owl-factor.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ // // OWL factor clock driver // diff --git a/drivers/clk/actions/owl-fixed-factor.h b/drivers/clk/actions/owl-fixed-factor.h index cc9fe36c0964..3dfd7fd7d292 100644 --- a/drivers/clk/actions/owl-fixed-factor.h +++ b/drivers/clk/actions/owl-fixed-factor.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ // // OWL fixed factor clock driver // diff --git a/drivers/clk/actions/owl-gate.h b/drivers/clk/actions/owl-gate.h index c2d61ceebce2..c2f161c93fda 100644 --- a/drivers/clk/actions/owl-gate.h +++ b/drivers/clk/actions/owl-gate.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ // // OWL gate clock driver // diff --git a/drivers/clk/actions/owl-mux.h b/drivers/clk/actions/owl-mux.h index 834284c8c3ae..53b9ab665294 100644 --- a/drivers/clk/actions/owl-mux.h +++ b/drivers/clk/actions/owl-mux.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ // // OWL mux clock driver // diff --git a/drivers/clk/actions/owl-pll.h b/drivers/clk/actions/owl-pll.h index 6fb0d45bb088..78e5fc360b03 100644 --- a/drivers/clk/actions/owl-pll.h +++ b/drivers/clk/actions/owl-pll.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ // // OWL pll clock driver // diff --git a/drivers/clk/actions/owl-reset.h b/drivers/clk/actions/owl-reset.h index 10f5774979a6..a947ffcb5a02 100644 --- a/drivers/clk/actions/owl-reset.h +++ b/drivers/clk/actions/owl-reset.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0-or-later +/* SPDX-License-Identifier: GPL-2.0-or-later */ // // Actions Semi Owl SoCs Reset Management Unit driver // diff --git a/drivers/clk/analogbits/Kconfig b/drivers/clk/analogbits/Kconfig new file mode 100644 index 000000000000..b5fd60c7f136 --- /dev/null +++ b/drivers/clk/analogbits/Kconfig @@ -0,0 +1,2 @@ +config CLK_ANALOGBITS_WRPLL_CLN28HPC + bool diff --git a/drivers/clk/analogbits/Makefile b/drivers/clk/analogbits/Makefile new file mode 100644 index 000000000000..bf017447451e --- /dev/null +++ b/drivers/clk/analogbits/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_CLK_ANALOGBITS_WRPLL_CLN28HPC) += wrpll-cln28hpc.o diff --git a/drivers/clk/analogbits/wrpll-cln28hpc.c b/drivers/clk/analogbits/wrpll-cln28hpc.c new file mode 100644 index 000000000000..776ead319ae9 --- /dev/null +++ b/drivers/clk/analogbits/wrpll-cln28hpc.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018-2019 SiFive, Inc. + * Wesley Terpstra + * Paul Walmsley + * + * This library supports configuration parsing and reprogramming of + * the CLN28HPC variant of the Analog Bits Wide Range PLL. The + * intention is for this library to be reusable for any device that + * integrates this PLL; thus the register structure and programming + * details are expected to be provided by a separate IP block driver. + * + * The bulk of this code is primarily useful for clock configurations + * that must operate at arbitrary rates, as opposed to clock configurations + * that are restricted by software or manufacturer guidance to a small, + * pre-determined set of performance points. + * + * References: + * - Analog Bits "Wide Range PLL Datasheet", version 2015.10.01 + * - SiFive FU540-C000 Manual v1p0, Chapter 7 "Clocking and Reset" + * https://static.dev.sifive.com/FU540-C000-v1.0.pdf + */ + +#include +#include +#include +#include +#include + +/* MIN_INPUT_FREQ: minimum input clock frequency, in Hz (Fref_min) */ +#define MIN_INPUT_FREQ 7000000 + +/* MAX_INPUT_FREQ: maximum input clock frequency, in Hz (Fref_max) */ +#define MAX_INPUT_FREQ 600000000 + +/* MIN_POST_DIVIDE_REF_FREQ: minimum post-divider reference frequency, in Hz */ +#define MIN_POST_DIVR_FREQ 7000000 + +/* MAX_POST_DIVIDE_REF_FREQ: maximum post-divider reference frequency, in Hz */ +#define MAX_POST_DIVR_FREQ 200000000 + +/* MIN_VCO_FREQ: minimum VCO frequency, in Hz (Fvco_min) */ +#define MIN_VCO_FREQ 2400000000UL + +/* MAX_VCO_FREQ: maximum VCO frequency, in Hz (Fvco_max) */ +#define MAX_VCO_FREQ 4800000000ULL + +/* MAX_DIVQ_DIVISOR: maximum output divisor. Selected by DIVQ = 6 */ +#define MAX_DIVQ_DIVISOR 64 + +/* MAX_DIVR_DIVISOR: maximum reference divisor. Selected by DIVR = 63 */ +#define MAX_DIVR_DIVISOR 64 + +/* MAX_LOCK_US: maximum PLL lock time, in microseconds (tLOCK_max) */ +#define MAX_LOCK_US 70 + +/* + * ROUND_SHIFT: number of bits to shift to avoid precision loss in the rounding + * algorithm + */ +#define ROUND_SHIFT 20 + +/* + * Private functions + */ + +/** + * __wrpll_calc_filter_range() - determine PLL loop filter bandwidth + * @post_divr_freq: input clock rate after the R divider + * + * Select the value to be presented to the PLL RANGE input signals, based + * on the input clock frequency after the post-R-divider @post_divr_freq. + * This code follows the recommendations in the PLL datasheet for filter + * range selection. + * + * Return: The RANGE value to be presented to the PLL configuration inputs, + * or a negative return code upon error. + */ +static int __wrpll_calc_filter_range(unsigned long post_divr_freq) +{ + if (post_divr_freq < MIN_POST_DIVR_FREQ || + post_divr_freq > MAX_POST_DIVR_FREQ) { + WARN(1, "%s: post-divider reference freq out of range: %lu", + __func__, post_divr_freq); + return -ERANGE; + } + + switch (post_divr_freq) { + case 0 ... 10999999: + return 1; + case 11000000 ... 17999999: + return 2; + case 18000000 ... 29999999: + return 3; + case 30000000 ... 49999999: + return 4; + case 50000000 ... 79999999: + return 5; + case 80000000 ... 129999999: + return 6; + } + + return 7; +} + +/** + * __wrpll_calc_fbdiv() - return feedback fixed divide value + * @c: ptr to a struct wrpll_cfg record to read from + * + * The internal feedback path includes a fixed by-two divider; the + * external feedback path does not. Return the appropriate divider + * value (2 or 1) depending on whether internal or external feedback + * is enabled. This code doesn't test for invalid configurations + * (e.g. both or neither of WRPLL_FLAGS_*_FEEDBACK are set); it relies + * on the caller to do so. + * + * Context: Any context. Caller must protect the memory pointed to by + * @c from simultaneous modification. + * + * Return: 2 if internal feedback is enabled or 1 if external feedback + * is enabled. + */ +static u8 __wrpll_calc_fbdiv(const struct wrpll_cfg *c) +{ + return (c->flags & WRPLL_FLAGS_INT_FEEDBACK_MASK) ? 2 : 1; +} + +/** + * __wrpll_calc_divq() - determine DIVQ based on target PLL output clock rate + * @target_rate: target PLL output clock rate + * @vco_rate: pointer to a u64 to store the computed VCO rate into + * + * Determine a reasonable value for the PLL Q post-divider, based on the + * target output rate @target_rate for the PLL. Along with returning the + * computed Q divider value as the return value, this function stores the + * desired target VCO rate into the variable pointed to by @vco_rate. + * + * Context: Any context. Caller must protect the memory pointed to by + * @vco_rate from simultaneous access or modification. + * + * Return: a positive integer DIVQ value to be programmed into the hardware + * upon success, or 0 upon error (since 0 is an invalid DIVQ value) + */ +static u8 __wrpll_calc_divq(u32 target_rate, u64 *vco_rate) +{ + u64 s; + u8 divq = 0; + + if (!vco_rate) { + WARN_ON(1); + goto wcd_out; + } + + s = div_u64(MAX_VCO_FREQ, target_rate); + if (s <= 1) { + divq = 1; + *vco_rate = MAX_VCO_FREQ; + } else if (s > MAX_DIVQ_DIVISOR) { + divq = ilog2(MAX_DIVQ_DIVISOR); + *vco_rate = MIN_VCO_FREQ; + } else { + divq = ilog2(s); + *vco_rate = (u64)target_rate << divq; + } + +wcd_out: + return divq; +} + +/** + * __wrpll_update_parent_rate() - update PLL data when parent rate changes + * @c: ptr to a struct wrpll_cfg record to write PLL data to + * @parent_rate: PLL input refclk rate (pre-R-divider) + * + * Pre-compute some data used by the PLL configuration algorithm when + * the PLL's reference clock rate changes. The intention is to avoid + * computation when the parent rate remains constant - expected to be + * the common case. + * + * Returns: 0 upon success or -ERANGE if the reference clock rate is + * out of range. + */ +static int __wrpll_update_parent_rate(struct wrpll_cfg *c, + unsigned long parent_rate) +{ + u8 max_r_for_parent; + + if (parent_rate > MAX_INPUT_FREQ || parent_rate < MIN_POST_DIVR_FREQ) + return -ERANGE; + + c->parent_rate = parent_rate; + max_r_for_parent = div_u64(parent_rate, MIN_POST_DIVR_FREQ); + c->max_r = min_t(u8, MAX_DIVR_DIVISOR, max_r_for_parent); + + c->init_r = DIV_ROUND_UP_ULL(parent_rate, MAX_POST_DIVR_FREQ); + + return 0; +} + +/** + * wrpll_configure() - compute PLL configuration for a target rate + * @c: ptr to a struct wrpll_cfg record to write into + * @target_rate: target PLL output clock rate (post-Q-divider) + * @parent_rate: PLL input refclk rate (pre-R-divider) + * + * Compute the appropriate PLL signal configuration values and store + * in PLL context @c. PLL reprogramming is not glitchless, so the + * caller should switch any downstream logic to a different clock + * source or clock-gate it before presenting these values to the PLL + * configuration signals. + * + * The caller must pass this function a pre-initialized struct + * wrpll_cfg record: either initialized to zero (with the + * exception of the .name and .flags fields) or read from the PLL. + * + * Context: Any context. Caller must protect the memory pointed to by @c + * from simultaneous access or modification. + * + * Return: 0 upon success; anything else upon failure. + */ +int wrpll_configure_for_rate(struct wrpll_cfg *c, u32 target_rate, + unsigned long parent_rate) +{ + unsigned long ratio; + u64 target_vco_rate, delta, best_delta, f_pre_div, vco, vco_pre; + u32 best_f, f, post_divr_freq; + u8 fbdiv, divq, best_r, r; + int range; + + if (c->flags == 0) { + WARN(1, "%s called with uninitialized PLL config", __func__); + return -EINVAL; + } + + /* Initialize rounding data if it hasn't been initialized already */ + if (parent_rate != c->parent_rate) { + if (__wrpll_update_parent_rate(c, parent_rate)) { + pr_err("%s: PLL input rate is out of range\n", + __func__); + return -ERANGE; + } + } + + c->flags &= ~WRPLL_FLAGS_RESET_MASK; + + /* Put the PLL into bypass if the user requests the parent clock rate */ + if (target_rate == parent_rate) { + c->flags |= WRPLL_FLAGS_BYPASS_MASK; + return 0; + } + + c->flags &= ~WRPLL_FLAGS_BYPASS_MASK; + + /* Calculate the Q shift and target VCO rate */ + divq = __wrpll_calc_divq(target_rate, &target_vco_rate); + if (!divq) + return -1; + c->divq = divq; + + /* Precalculate the pre-Q divider target ratio */ + ratio = div64_u64((target_vco_rate << ROUND_SHIFT), parent_rate); + + fbdiv = __wrpll_calc_fbdiv(c); + best_r = 0; + best_f = 0; + best_delta = MAX_VCO_FREQ; + + /* + * Consider all values for R which land within + * [MIN_POST_DIVR_FREQ, MAX_POST_DIVR_FREQ]; prefer smaller R + */ + for (r = c->init_r; r <= c->max_r; ++r) { + f_pre_div = ratio * r; + f = (f_pre_div + (1 << ROUND_SHIFT)) >> ROUND_SHIFT; + f >>= (fbdiv - 1); + + post_divr_freq = div_u64(parent_rate, r); + vco_pre = fbdiv * post_divr_freq; + vco = vco_pre * f; + + /* Ensure rounding didn't take us out of range */ + if (vco > target_vco_rate) { + --f; + vco = vco_pre * f; + } else if (vco < MIN_VCO_FREQ) { + ++f; + vco = vco_pre * f; + } + + delta = abs(target_rate - vco); + if (delta < best_delta) { + best_delta = delta; + best_r = r; + best_f = f; + } + } + + c->divr = best_r - 1; + c->divf = best_f - 1; + + post_divr_freq = div_u64(parent_rate, best_r); + + /* Pick the best PLL jitter filter */ + range = __wrpll_calc_filter_range(post_divr_freq); + if (range < 0) + return range; + c->range = range; + + return 0; +} + +/** + * wrpll_calc_output_rate() - calculate the PLL's target output rate + * @c: ptr to a struct wrpll_cfg record to read from + * @parent_rate: PLL refclk rate + * + * Given a pointer to the PLL's current input configuration @c and the + * PLL's input reference clock rate @parent_rate (before the R + * pre-divider), calculate the PLL's output clock rate (after the Q + * post-divider). + * + * Context: Any context. Caller must protect the memory pointed to by @c + * from simultaneous modification. + * + * Return: the PLL's output clock rate, in Hz. The return value from + * this function is intended to be convenient to pass directly + * to the Linux clock framework; thus there is no explicit + * error return value. + */ +unsigned long wrpll_calc_output_rate(const struct wrpll_cfg *c, + unsigned long parent_rate) +{ + u8 fbdiv; + u64 n; + + if (c->flags & WRPLL_FLAGS_EXT_FEEDBACK_MASK) { + WARN(1, "external feedback mode not yet supported"); + return ULONG_MAX; + } + + fbdiv = __wrpll_calc_fbdiv(c); + n = parent_rate * fbdiv * (c->divf + 1); + n = div_u64(n, c->divr + 1); + n >>= c->divq; + + return n; +} + +/** + * wrpll_calc_max_lock_us() - return the time for the PLL to lock + * @c: ptr to a struct wrpll_cfg record to read from + * + * Return the minimum amount of time (in microseconds) that the caller + * must wait after reprogramming the PLL to ensure that it is locked + * to the input frequency and stable. This is likely to depend on the DIVR + * value; this is under discussion with the manufacturer. + * + * Return: the minimum amount of time the caller must wait for the PLL + * to lock (in microseconds) + */ +unsigned int wrpll_calc_max_lock_us(const struct wrpll_cfg *c) +{ + return MAX_LOCK_US; +} diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile index c75df1cad60e..3732241352ce 100644 --- a/drivers/clk/at91/Makefile +++ b/drivers/clk/at91/Makefile @@ -14,6 +14,8 @@ obj-$(CONFIG_HAVE_AT91_SMD) += clk-smd.o obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o +obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL) += clk-sam9x60-pll.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o +obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c index b1af5a395423..0aabe49aed09 100644 --- a/drivers/clk/at91/at91sam9260.c +++ b/drivers/clk/at91/at91sam9260.c @@ -41,7 +41,7 @@ static u8 sam9260_plla_out[] = { 0, 2 }; static u16 sam9260_plla_icpll[] = { 1, 1 }; -static struct clk_range sam9260_plla_outputs[] = { +static const struct clk_range sam9260_plla_outputs[] = { { .min = 80000000, .max = 160000000 }, { .min = 150000000, .max = 240000000 }, }; @@ -58,7 +58,7 @@ static u8 sam9260_pllb_out[] = { 1 }; static u16 sam9260_pllb_icpll[] = { 1 }; -static struct clk_range sam9260_pllb_outputs[] = { +static const struct clk_range sam9260_pllb_outputs[] = { { .min = 70000000, .max = 130000000 }, }; @@ -128,7 +128,7 @@ static u8 sam9g20_plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 }; static u16 sam9g20_plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 }; -static struct clk_range sam9g20_plla_outputs[] = { +static const struct clk_range sam9g20_plla_outputs[] = { { .min = 745000000, .max = 800000000 }, { .min = 695000000, .max = 750000000 }, { .min = 645000000, .max = 700000000 }, @@ -151,7 +151,7 @@ static u8 sam9g20_pllb_out[] = { 0 }; static u16 sam9g20_pllb_icpll[] = { 0 }; -static struct clk_range sam9g20_pllb_outputs[] = { +static const struct clk_range sam9g20_pllb_outputs[] = { { .min = 30000000, .max = 100000000 }, }; @@ -182,7 +182,7 @@ static const struct clk_master_characteristics sam9261_mck_characteristics = { .divisors = { 1, 2, 4, 0 }, }; -static struct clk_range sam9261_plla_outputs[] = { +static const struct clk_range sam9261_plla_outputs[] = { { .min = 80000000, .max = 200000000 }, { .min = 190000000, .max = 240000000 }, }; @@ -199,7 +199,7 @@ static u8 sam9261_pllb_out[] = { 1 }; static u16 sam9261_pllb_icpll[] = { 1 }; -static struct clk_range sam9261_pllb_outputs[] = { +static const struct clk_range sam9261_pllb_outputs[] = { { .min = 70000000, .max = 130000000 }, }; @@ -262,7 +262,7 @@ static const struct clk_master_characteristics sam9263_mck_characteristics = { .divisors = { 1, 2, 4, 0 }, }; -static struct clk_range sam9263_pll_outputs[] = { +static const struct clk_range sam9263_pll_outputs[] = { { .min = 80000000, .max = 200000000 }, { .min = 190000000, .max = 240000000 }, }; diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c index 5aeef68b4bdd..0ac34cdaa106 100644 --- a/drivers/clk/at91/at91sam9rl.c +++ b/drivers/clk/at91/at91sam9rl.c @@ -14,7 +14,7 @@ static const struct clk_master_characteristics sam9rl_mck_characteristics = { static u8 sam9rl_plla_out[] = { 0, 2 }; -static struct clk_range sam9rl_plla_outputs[] = { +static const struct clk_range sam9rl_plla_outputs[] = { { .min = 80000000, .max = 200000000 }, { .min = 190000000, .max = 240000000 }, }; diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c index 3487e03d4bc6..0855f3a80cc7 100644 --- a/drivers/clk/at91/at91sam9x5.c +++ b/drivers/clk/at91/at91sam9x5.c @@ -17,7 +17,7 @@ static u8 plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 }; static u16 plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 }; -static struct clk_range plla_outputs[] = { +static const struct clk_range plla_outputs[] = { { .min = 745000000, .max = 800000000 }, { .min = 695000000, .max = 750000000 }, { .min = 645000000, .max = 700000000 }, @@ -49,6 +49,13 @@ static const struct { { .n = "pck1", .p = "prog1", .id = 9 }, }; +static const struct clk_pcr_layout at91sam9x5_pcr_layout = { + .offset = 0x10c, + .cmd = BIT(12), + .pid_mask = GENMASK(5, 0), + .div_mask = GENMASK(17, 16), +}; + struct pck { char *n; u8 id; @@ -242,6 +249,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np, for (i = 0; i < ARRAY_SIZE(at91sam9x5_periphck); i++) { hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &at91sam9x5_pcr_layout, at91sam9x5_periphck[i].n, "masterck", at91sam9x5_periphck[i].id, @@ -254,6 +262,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np, for (i = 0; extra_pcks[i].id; i++) { hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &at91sam9x5_pcr_layout, extra_pcks[i].n, "masterck", extra_pcks[i].id, diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c index 66e7f7baf958..5f18847965c1 100644 --- a/drivers/clk/at91/clk-generated.c +++ b/drivers/clk/at91/clk-generated.c @@ -11,6 +11,7 @@ * */ +#include #include #include #include @@ -31,6 +32,7 @@ struct clk_generated { spinlock_t *lock; u32 id; u32 gckdiv; + const struct clk_pcr_layout *layout; u8 parent_id; bool audio_pll_allowed; }; @@ -47,14 +49,14 @@ static int clk_generated_enable(struct clk_hw *hw) __func__, gck->gckdiv, gck->parent_id); spin_lock_irqsave(gck->lock, flags); - regmap_write(gck->regmap, AT91_PMC_PCR, - (gck->id & AT91_PMC_PCR_PID_MASK)); - regmap_update_bits(gck->regmap, AT91_PMC_PCR, - AT91_PMC_PCR_GCKDIV_MASK | AT91_PMC_PCR_GCKCSS_MASK | - AT91_PMC_PCR_CMD | AT91_PMC_PCR_GCKEN, - AT91_PMC_PCR_GCKCSS(gck->parent_id) | - AT91_PMC_PCR_CMD | - AT91_PMC_PCR_GCKDIV(gck->gckdiv) | + regmap_write(gck->regmap, gck->layout->offset, + (gck->id & gck->layout->pid_mask)); + regmap_update_bits(gck->regmap, gck->layout->offset, + AT91_PMC_PCR_GCKDIV_MASK | gck->layout->gckcss_mask | + gck->layout->cmd | AT91_PMC_PCR_GCKEN, + field_prep(gck->layout->gckcss_mask, gck->parent_id) | + gck->layout->cmd | + FIELD_PREP(AT91_PMC_PCR_GCKDIV_MASK, gck->gckdiv) | AT91_PMC_PCR_GCKEN); spin_unlock_irqrestore(gck->lock, flags); return 0; @@ -66,11 +68,11 @@ static void clk_generated_disable(struct clk_hw *hw) unsigned long flags; spin_lock_irqsave(gck->lock, flags); - regmap_write(gck->regmap, AT91_PMC_PCR, - (gck->id & AT91_PMC_PCR_PID_MASK)); - regmap_update_bits(gck->regmap, AT91_PMC_PCR, - AT91_PMC_PCR_CMD | AT91_PMC_PCR_GCKEN, - AT91_PMC_PCR_CMD); + regmap_write(gck->regmap, gck->layout->offset, + (gck->id & gck->layout->pid_mask)); + regmap_update_bits(gck->regmap, gck->layout->offset, + gck->layout->cmd | AT91_PMC_PCR_GCKEN, + gck->layout->cmd); spin_unlock_irqrestore(gck->lock, flags); } @@ -81,9 +83,9 @@ static int clk_generated_is_enabled(struct clk_hw *hw) unsigned int status; spin_lock_irqsave(gck->lock, flags); - regmap_write(gck->regmap, AT91_PMC_PCR, - (gck->id & AT91_PMC_PCR_PID_MASK)); - regmap_read(gck->regmap, AT91_PMC_PCR, &status); + regmap_write(gck->regmap, gck->layout->offset, + (gck->id & gck->layout->pid_mask)); + regmap_read(gck->regmap, gck->layout->offset, &status); spin_unlock_irqrestore(gck->lock, flags); return status & AT91_PMC_PCR_GCKEN ? 1 : 0; @@ -259,19 +261,18 @@ static void clk_generated_startup(struct clk_generated *gck) unsigned long flags; spin_lock_irqsave(gck->lock, flags); - regmap_write(gck->regmap, AT91_PMC_PCR, - (gck->id & AT91_PMC_PCR_PID_MASK)); - regmap_read(gck->regmap, AT91_PMC_PCR, &tmp); + regmap_write(gck->regmap, gck->layout->offset, + (gck->id & gck->layout->pid_mask)); + regmap_read(gck->regmap, gck->layout->offset, &tmp); spin_unlock_irqrestore(gck->lock, flags); - gck->parent_id = (tmp & AT91_PMC_PCR_GCKCSS_MASK) - >> AT91_PMC_PCR_GCKCSS_OFFSET; - gck->gckdiv = (tmp & AT91_PMC_PCR_GCKDIV_MASK) - >> AT91_PMC_PCR_GCKDIV_OFFSET; + gck->parent_id = field_get(gck->layout->gckcss_mask, tmp); + gck->gckdiv = FIELD_GET(AT91_PMC_PCR_GCKDIV_MASK, tmp); } struct clk_hw * __init at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock, + const struct clk_pcr_layout *layout, const char *name, const char **parent_names, u8 num_parents, u8 id, bool pll_audio, const struct clk_range *range) @@ -298,6 +299,7 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock, gck->lock = lock; gck->range = *range; gck->audio_pll_allowed = pll_audio; + gck->layout = layout; clk_generated_startup(gck); hw = &gck->hw; diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c index eb53b4a8fab6..12b5bf4cc7bb 100644 --- a/drivers/clk/at91/clk-master.c +++ b/drivers/clk/at91/clk-master.c @@ -29,6 +29,7 @@ struct clk_master { struct regmap *regmap; const struct clk_master_layout *layout; const struct clk_master_characteristics *characteristics; + u32 mckr; }; static inline bool clk_master_ready(struct regmap *regmap) @@ -69,7 +70,7 @@ static unsigned long clk_master_recalc_rate(struct clk_hw *hw, master->characteristics; unsigned int mckr; - regmap_read(master->regmap, AT91_PMC_MCKR, &mckr); + regmap_read(master->regmap, master->layout->offset, &mckr); mckr &= layout->mask; pres = (mckr >> layout->pres_shift) & MASTER_PRES_MASK; @@ -95,7 +96,7 @@ static u8 clk_master_get_parent(struct clk_hw *hw) struct clk_master *master = to_clk_master(hw); unsigned int mckr; - regmap_read(master->regmap, AT91_PMC_MCKR, &mckr); + regmap_read(master->regmap, master->layout->offset, &mckr); return mckr & AT91_PMC_CSS; } @@ -147,13 +148,14 @@ at91_clk_register_master(struct regmap *regmap, return hw; } - const struct clk_master_layout at91rm9200_master_layout = { .mask = 0x31F, .pres_shift = 2, + .offset = AT91_PMC_MCKR, }; const struct clk_master_layout at91sam9x5_master_layout = { .mask = 0x373, .pres_shift = 4, + .offset = AT91_PMC_MCKR, }; diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c index 65c1defa78e4..6b7748b9588a 100644 --- a/drivers/clk/at91/clk-peripheral.c +++ b/drivers/clk/at91/clk-peripheral.c @@ -8,6 +8,7 @@ * */ +#include #include #include #include @@ -23,9 +24,6 @@ DEFINE_SPINLOCK(pmc_pcr_lock); #define PERIPHERAL_ID_MAX 31 #define PERIPHERAL_MASK(id) (1 << ((id) & PERIPHERAL_ID_MAX)) -#define PERIPHERAL_RSHIFT_MASK 0x3 -#define PERIPHERAL_RSHIFT(val) (((val) >> 16) & PERIPHERAL_RSHIFT_MASK) - #define PERIPHERAL_MAX_SHIFT 3 struct clk_peripheral { @@ -43,6 +41,7 @@ struct clk_sam9x5_peripheral { spinlock_t *lock; u32 id; u32 div; + const struct clk_pcr_layout *layout; bool auto_div; }; @@ -169,13 +168,13 @@ static int clk_sam9x5_peripheral_enable(struct clk_hw *hw) return 0; spin_lock_irqsave(periph->lock, flags); - regmap_write(periph->regmap, AT91_PMC_PCR, - (periph->id & AT91_PMC_PCR_PID_MASK)); - regmap_update_bits(periph->regmap, AT91_PMC_PCR, - AT91_PMC_PCR_DIV_MASK | AT91_PMC_PCR_CMD | + regmap_write(periph->regmap, periph->layout->offset, + (periph->id & periph->layout->pid_mask)); + regmap_update_bits(periph->regmap, periph->layout->offset, + periph->layout->div_mask | periph->layout->cmd | AT91_PMC_PCR_EN, - AT91_PMC_PCR_DIV(periph->div) | - AT91_PMC_PCR_CMD | + field_prep(periph->layout->div_mask, periph->div) | + periph->layout->cmd | AT91_PMC_PCR_EN); spin_unlock_irqrestore(periph->lock, flags); @@ -191,11 +190,11 @@ static void clk_sam9x5_peripheral_disable(struct clk_hw *hw) return; spin_lock_irqsave(periph->lock, flags); - regmap_write(periph->regmap, AT91_PMC_PCR, - (periph->id & AT91_PMC_PCR_PID_MASK)); - regmap_update_bits(periph->regmap, AT91_PMC_PCR, - AT91_PMC_PCR_EN | AT91_PMC_PCR_CMD, - AT91_PMC_PCR_CMD); + regmap_write(periph->regmap, periph->layout->offset, + (periph->id & periph->layout->pid_mask)); + regmap_update_bits(periph->regmap, periph->layout->offset, + AT91_PMC_PCR_EN | periph->layout->cmd, + periph->layout->cmd); spin_unlock_irqrestore(periph->lock, flags); } @@ -209,9 +208,9 @@ static int clk_sam9x5_peripheral_is_enabled(struct clk_hw *hw) return 1; spin_lock_irqsave(periph->lock, flags); - regmap_write(periph->regmap, AT91_PMC_PCR, - (periph->id & AT91_PMC_PCR_PID_MASK)); - regmap_read(periph->regmap, AT91_PMC_PCR, &status); + regmap_write(periph->regmap, periph->layout->offset, + (periph->id & periph->layout->pid_mask)); + regmap_read(periph->regmap, periph->layout->offset, &status); spin_unlock_irqrestore(periph->lock, flags); return status & AT91_PMC_PCR_EN ? 1 : 0; @@ -229,13 +228,13 @@ clk_sam9x5_peripheral_recalc_rate(struct clk_hw *hw, return parent_rate; spin_lock_irqsave(periph->lock, flags); - regmap_write(periph->regmap, AT91_PMC_PCR, - (periph->id & AT91_PMC_PCR_PID_MASK)); - regmap_read(periph->regmap, AT91_PMC_PCR, &status); + regmap_write(periph->regmap, periph->layout->offset, + (periph->id & periph->layout->pid_mask)); + regmap_read(periph->regmap, periph->layout->offset, &status); spin_unlock_irqrestore(periph->lock, flags); if (status & AT91_PMC_PCR_EN) { - periph->div = PERIPHERAL_RSHIFT(status); + periph->div = field_get(periph->layout->div_mask, status); periph->auto_div = false; } else { clk_sam9x5_peripheral_autodiv(periph); @@ -328,6 +327,7 @@ static const struct clk_ops sam9x5_peripheral_ops = { struct clk_hw * __init at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock, + const struct clk_pcr_layout *layout, const char *name, const char *parent_name, u32 id, const struct clk_range *range) { @@ -354,7 +354,9 @@ at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock, periph->div = 0; periph->regmap = regmap; periph->lock = lock; - periph->auto_div = true; + if (layout->div_mask) + periph->auto_div = true; + periph->layout = layout; periph->range = *range; hw = &periph->hw; diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c new file mode 100644 index 000000000000..34b817825b22 --- /dev/null +++ b/drivers/clk/at91/clk-sam9x60-pll.c @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Microchip Technology Inc. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "pmc.h" + +#define PMC_PLL_CTRL0 0xc +#define PMC_PLL_CTRL0_DIV_MSK GENMASK(7, 0) +#define PMC_PLL_CTRL0_ENPLL BIT(28) +#define PMC_PLL_CTRL0_ENPLLCK BIT(29) +#define PMC_PLL_CTRL0_ENLOCK BIT(31) + +#define PMC_PLL_CTRL1 0x10 +#define PMC_PLL_CTRL1_FRACR_MSK GENMASK(21, 0) +#define PMC_PLL_CTRL1_MUL_MSK GENMASK(30, 24) + +#define PMC_PLL_ACR 0x18 +#define PMC_PLL_ACR_DEFAULT 0x1b040010UL +#define PMC_PLL_ACR_UTMIVR BIT(12) +#define PMC_PLL_ACR_UTMIBG BIT(13) +#define PMC_PLL_ACR_LOOP_FILTER_MSK GENMASK(31, 24) + +#define PMC_PLL_UPDT 0x1c +#define PMC_PLL_UPDT_UPDATE BIT(8) + +#define PMC_PLL_ISR0 0xec + +#define PLL_DIV_MAX (FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, UINT_MAX) + 1) +#define UPLL_DIV 2 +#define PLL_MUL_MAX (FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1) + +#define PLL_MAX_ID 1 + +struct sam9x60_pll { + struct clk_hw hw; + struct regmap *regmap; + spinlock_t *lock; + const struct clk_pll_characteristics *characteristics; + u32 frac; + u8 id; + u8 div; + u16 mul; +}; + +#define to_sam9x60_pll(hw) container_of(hw, struct sam9x60_pll, hw) + +static inline bool sam9x60_pll_ready(struct regmap *regmap, int id) +{ + unsigned int status; + + regmap_read(regmap, PMC_PLL_ISR0, &status); + + return !!(status & BIT(id)); +} + +static int sam9x60_pll_prepare(struct clk_hw *hw) +{ + struct sam9x60_pll *pll = to_sam9x60_pll(hw); + struct regmap *regmap = pll->regmap; + unsigned long flags; + u8 div; + u16 mul; + u32 val; + + spin_lock_irqsave(pll->lock, flags); + regmap_write(regmap, PMC_PLL_UPDT, pll->id); + + regmap_read(regmap, PMC_PLL_CTRL0, &val); + div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val); + + regmap_read(regmap, PMC_PLL_CTRL1, &val); + mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, val); + + if (sam9x60_pll_ready(regmap, pll->id) && + (div == pll->div && mul == pll->mul)) { + spin_unlock_irqrestore(pll->lock, flags); + return 0; + } + + /* Recommended value for PMC_PLL_ACR */ + val = PMC_PLL_ACR_DEFAULT; + regmap_write(regmap, PMC_PLL_ACR, val); + + regmap_write(regmap, PMC_PLL_CTRL1, + FIELD_PREP(PMC_PLL_CTRL1_MUL_MSK, pll->mul)); + + if (pll->characteristics->upll) { + /* Enable the UTMI internal bandgap */ + val |= PMC_PLL_ACR_UTMIBG; + regmap_write(regmap, PMC_PLL_ACR, val); + + udelay(10); + + /* Enable the UTMI internal regulator */ + val |= PMC_PLL_ACR_UTMIVR; + regmap_write(regmap, PMC_PLL_ACR, val); + + udelay(10); + } + + regmap_update_bits(regmap, PMC_PLL_UPDT, + PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE); + + regmap_write(regmap, PMC_PLL_CTRL0, + PMC_PLL_CTRL0_ENLOCK | PMC_PLL_CTRL0_ENPLL | + PMC_PLL_CTRL0_ENPLLCK | pll->div); + + regmap_update_bits(regmap, PMC_PLL_UPDT, + PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE); + + while (!sam9x60_pll_ready(regmap, pll->id)) + cpu_relax(); + + spin_unlock_irqrestore(pll->lock, flags); + + return 0; +} + +static int sam9x60_pll_is_prepared(struct clk_hw *hw) +{ + struct sam9x60_pll *pll = to_sam9x60_pll(hw); + + return sam9x60_pll_ready(pll->regmap, pll->id); +} + +static void sam9x60_pll_unprepare(struct clk_hw *hw) +{ + struct sam9x60_pll *pll = to_sam9x60_pll(hw); + unsigned long flags; + + spin_lock_irqsave(pll->lock, flags); + + regmap_write(pll->regmap, PMC_PLL_UPDT, pll->id); + + regmap_update_bits(pll->regmap, PMC_PLL_CTRL0, + PMC_PLL_CTRL0_ENPLLCK, 0); + + regmap_update_bits(pll->regmap, PMC_PLL_UPDT, + PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE); + + regmap_update_bits(pll->regmap, PMC_PLL_CTRL0, PMC_PLL_CTRL0_ENPLL, 0); + + if (pll->characteristics->upll) + regmap_update_bits(pll->regmap, PMC_PLL_ACR, + PMC_PLL_ACR_UTMIBG | PMC_PLL_ACR_UTMIVR, 0); + + regmap_update_bits(pll->regmap, PMC_PLL_UPDT, + PMC_PLL_UPDT_UPDATE, PMC_PLL_UPDT_UPDATE); + + spin_unlock_irqrestore(pll->lock, flags); +} + +static unsigned long sam9x60_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct sam9x60_pll *pll = to_sam9x60_pll(hw); + + return (parent_rate * (pll->mul + 1)) / (pll->div + 1); +} + +static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll, + unsigned long rate, + unsigned long parent_rate, + bool update) +{ + const struct clk_pll_characteristics *characteristics = + pll->characteristics; + unsigned long bestremainder = ULONG_MAX; + unsigned long maxdiv, mindiv, tmpdiv; + long bestrate = -ERANGE; + unsigned long bestdiv = 0; + unsigned long bestmul = 0; + unsigned long bestfrac = 0; + + if (rate < characteristics->output[0].min || + rate > characteristics->output[0].max) + return -ERANGE; + + if (!pll->characteristics->upll) { + mindiv = parent_rate / rate; + if (mindiv < 2) + mindiv = 2; + + maxdiv = DIV_ROUND_UP(parent_rate * PLL_MUL_MAX, rate); + if (maxdiv > PLL_DIV_MAX) + maxdiv = PLL_DIV_MAX; + } else { + mindiv = maxdiv = UPLL_DIV; + } + + for (tmpdiv = mindiv; tmpdiv <= maxdiv; tmpdiv++) { + unsigned long remainder; + unsigned long tmprate; + unsigned long tmpmul; + unsigned long tmpfrac = 0; + + /* + * Calculate the multiplier associated with the current + * divider that provide the closest rate to the requested one. + */ + tmpmul = mult_frac(rate, tmpdiv, parent_rate); + tmprate = mult_frac(parent_rate, tmpmul, tmpdiv); + remainder = rate - tmprate; + + if (remainder) { + tmpfrac = DIV_ROUND_CLOSEST_ULL((u64)remainder * tmpdiv * (1 << 22), + parent_rate); + + tmprate += DIV_ROUND_CLOSEST_ULL((u64)tmpfrac * parent_rate, + tmpdiv * (1 << 22)); + + if (tmprate > rate) + remainder = tmprate - rate; + else + remainder = rate - tmprate; + } + + /* + * Compare the remainder with the best remainder found until + * now and elect a new best multiplier/divider pair if the + * current remainder is smaller than the best one. + */ + if (remainder < bestremainder) { + bestremainder = remainder; + bestdiv = tmpdiv; + bestmul = tmpmul; + bestrate = tmprate; + bestfrac = tmpfrac; + } + + /* We've found a perfect match! */ + if (!remainder) + break; + } + + /* Check if bestrate is a valid output rate */ + if (bestrate < characteristics->output[0].min && + bestrate > characteristics->output[0].max) + return -ERANGE; + + if (update) { + pll->div = bestdiv - 1; + pll->mul = bestmul - 1; + pll->frac = bestfrac; + } + + return bestrate; +} + +static long sam9x60_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct sam9x60_pll *pll = to_sam9x60_pll(hw); + + return sam9x60_pll_get_best_div_mul(pll, rate, *parent_rate, false); +} + +static int sam9x60_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct sam9x60_pll *pll = to_sam9x60_pll(hw); + + return sam9x60_pll_get_best_div_mul(pll, rate, parent_rate, true); +} + +static const struct clk_ops pll_ops = { + .prepare = sam9x60_pll_prepare, + .unprepare = sam9x60_pll_unprepare, + .is_prepared = sam9x60_pll_is_prepared, + .recalc_rate = sam9x60_pll_recalc_rate, + .round_rate = sam9x60_pll_round_rate, + .set_rate = sam9x60_pll_set_rate, +}; + +struct clk_hw * __init +sam9x60_clk_register_pll(struct regmap *regmap, spinlock_t *lock, + const char *name, const char *parent_name, u8 id, + const struct clk_pll_characteristics *characteristics) +{ + struct sam9x60_pll *pll; + struct clk_hw *hw; + struct clk_init_data init; + unsigned int pllr; + int ret; + + if (id > PLL_MAX_ID) + return ERR_PTR(-EINVAL); + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &pll_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + init.flags = CLK_SET_RATE_GATE; + + pll->id = id; + pll->hw.init = &init; + pll->characteristics = characteristics; + pll->regmap = regmap; + pll->lock = lock; + + regmap_write(regmap, PMC_PLL_UPDT, id); + regmap_read(regmap, PMC_PLL_CTRL0, &pllr); + pll->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, pllr); + regmap_read(regmap, PMC_PLL_CTRL1, &pllr); + pll->mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, pllr); + + hw = &pll->hw; + ret = clk_hw_register(NULL, hw); + if (ret) { + kfree(pll); + hw = ERR_PTR(ret); + } + + return hw; +} + diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c index 79ee1c760f2a..ebc37ee33518 100644 --- a/drivers/clk/at91/clk-usb.c +++ b/drivers/clk/at91/clk-usb.c @@ -23,9 +23,13 @@ #define RM9200_USB_DIV_SHIFT 28 #define RM9200_USB_DIV_TAB_SIZE 4 +#define SAM9X5_USBS_MASK GENMASK(0, 0) +#define SAM9X60_USBS_MASK GENMASK(1, 0) + struct at91sam9x5_clk_usb { struct clk_hw hw; struct regmap *regmap; + u32 usbs_mask; }; #define to_at91sam9x5_clk_usb(hw) \ @@ -111,8 +115,7 @@ static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index) if (index > 1) return -EINVAL; - regmap_update_bits(usb->regmap, AT91_PMC_USB, AT91_PMC_USBS, - index ? AT91_PMC_USBS : 0); + regmap_update_bits(usb->regmap, AT91_PMC_USB, usb->usbs_mask, index); return 0; } @@ -124,7 +127,7 @@ static u8 at91sam9x5_clk_usb_get_parent(struct clk_hw *hw) regmap_read(usb->regmap, AT91_PMC_USB, &usbr); - return usbr & AT91_PMC_USBS; + return usbr & usb->usbs_mask; } static int at91sam9x5_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate, @@ -190,9 +193,10 @@ static const struct clk_ops at91sam9n12_usb_ops = { .set_rate = at91sam9x5_clk_usb_set_rate, }; -struct clk_hw * __init -at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name, - const char **parent_names, u8 num_parents) +static struct clk_hw * __init +_at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name, + const char **parent_names, u8 num_parents, + u32 usbs_mask) { struct at91sam9x5_clk_usb *usb; struct clk_hw *hw; @@ -212,6 +216,7 @@ at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name, usb->hw.init = &init; usb->regmap = regmap; + usb->usbs_mask = SAM9X5_USBS_MASK; hw = &usb->hw; ret = clk_hw_register(NULL, &usb->hw); @@ -223,6 +228,22 @@ at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name, return hw; } +struct clk_hw * __init +at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name, + const char **parent_names, u8 num_parents) +{ + return _at91sam9x5_clk_register_usb(regmap, name, parent_names, + num_parents, SAM9X5_USBS_MASK); +} + +struct clk_hw * __init +sam9x60_clk_register_usb(struct regmap *regmap, const char *name, + const char **parent_names, u8 num_parents) +{ + return _at91sam9x5_clk_register_usb(regmap, name, parent_names, + num_parents, SAM9X60_USBS_MASK); +} + struct clk_hw * __init at91sam9n12_clk_register_usb(struct regmap *regmap, const char *name, const char *parent_name) diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c index b95bb4e2a927..aa1754eac59f 100644 --- a/drivers/clk/at91/dt-compat.c +++ b/drivers/clk/at91/dt-compat.c @@ -93,6 +93,14 @@ CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pmc_setup, of_sama5d2_clk_audio_pll_pmc_setup); #endif /* CONFIG_HAVE_AT91_AUDIO_PLL */ +static const struct clk_pcr_layout dt_pcr_layout = { + .offset = 0x10c, + .cmd = BIT(12), + .pid_mask = GENMASK(5, 0), + .div_mask = GENMASK(17, 16), + .gckcss_mask = GENMASK(10, 8), +}; + #ifdef CONFIG_HAVE_AT91_GENERATED_CLK #define GENERATED_SOURCE_MAX 6 @@ -146,7 +154,8 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np) id == GCK_ID_CLASSD)) pll_audio = true; - hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, name, + hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, + &dt_pcr_layout, name, parent_names, num_parents, id, pll_audio, &range); if (IS_ERR(hw)) @@ -448,6 +457,7 @@ of_at91_clk_periph_setup(struct device_node *np, u8 type) hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &dt_pcr_layout, name, parent_name, id, &range); diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h index a0e5ce9c9b9e..2311204948be 100644 --- a/drivers/clk/at91/pmc.h +++ b/drivers/clk/at91/pmc.h @@ -38,6 +38,7 @@ struct clk_range { #define CLK_RANGE(MIN, MAX) {.min = MIN, .max = MAX,} struct clk_master_layout { + u32 offset; u32 mask; u8 pres_shift; }; @@ -65,9 +66,10 @@ extern const struct clk_pll_layout sama5d3_pll_layout; struct clk_pll_characteristics { struct clk_range input; int num_output; - struct clk_range *output; + const struct clk_range *output; u16 *icpll; u8 *out; + u8 upll : 1; }; struct clk_programmable_layout { @@ -82,6 +84,17 @@ extern const struct clk_programmable_layout at91rm9200_programmable_layout; extern const struct clk_programmable_layout at91sam9g45_programmable_layout; extern const struct clk_programmable_layout at91sam9x5_programmable_layout; +struct clk_pcr_layout { + u32 offset; + u32 cmd; + u32 div_mask; + u32 gckcss_mask; + u32 pid_mask; +}; + +#define field_get(_mask, _reg) (((_reg) & (_mask)) >> (ffs(_mask) - 1)) +#define field_prep(_mask, _val) (((_val) << (ffs(_mask) - 1)) & (_mask)) + #define ndck(a, s) (a[s - 1].id + 1) #define nck(a) (a[ARRAY_SIZE(a) - 1].id + 1) struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem, @@ -107,6 +120,7 @@ at91_clk_register_audio_pll_pmc(struct regmap *regmap, const char *name, struct clk_hw * __init at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock, + const struct clk_pcr_layout *layout, const char *name, const char **parent_names, u8 num_parents, u8 id, bool pll_audio, const struct clk_range *range); @@ -145,6 +159,7 @@ at91_clk_register_peripheral(struct regmap *regmap, const char *name, const char *parent_name, u32 id); struct clk_hw * __init at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock, + const struct clk_pcr_layout *layout, const char *name, const char *parent_name, u32 id, const struct clk_range *range); @@ -157,6 +172,11 @@ struct clk_hw * __init at91_clk_register_plldiv(struct regmap *regmap, const char *name, const char *parent_name); +struct clk_hw * __init +sam9x60_clk_register_pll(struct regmap *regmap, spinlock_t *lock, + const char *name, const char *parent_name, u8 id, + const struct clk_pll_characteristics *characteristics); + struct clk_hw * __init at91_clk_register_programmable(struct regmap *regmap, const char *name, const char **parent_names, u8 num_parents, u8 id, @@ -183,6 +203,9 @@ struct clk_hw * __init at91sam9n12_clk_register_usb(struct regmap *regmap, const char *name, const char *parent_name); struct clk_hw * __init +sam9x60_clk_register_usb(struct regmap *regmap, const char *name, + const char **parent_names, u8 num_parents); +struct clk_hw * __init at91rm9200_clk_register_usb(struct regmap *regmap, const char *name, const char *parent_name, const u32 *divisors); diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c new file mode 100644 index 000000000000..9790ddfa5b3c --- /dev/null +++ b/drivers/clk/at91/sam9x60.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include + +#include + +#include "pmc.h" + +static DEFINE_SPINLOCK(pmc_pll_lock); + +static const struct clk_master_characteristics mck_characteristics = { + .output = { .min = 140000000, .max = 200000000 }, + .divisors = { 1, 2, 4, 3 }, + .have_div3_pres = 1, +}; + +static const struct clk_master_layout sam9x60_master_layout = { + .mask = 0x373, + .pres_shift = 4, + .offset = 0x28, +}; + +static const struct clk_range plla_outputs[] = { + { .min = 300000000, .max = 600000000 }, +}; + +static const struct clk_pll_characteristics plla_characteristics = { + .input = { .min = 12000000, .max = 48000000 }, + .num_output = ARRAY_SIZE(plla_outputs), + .output = plla_outputs, +}; + +static const struct clk_range upll_outputs[] = { + { .min = 300000000, .max = 500000000 }, +}; + +static const struct clk_pll_characteristics upll_characteristics = { + .input = { .min = 12000000, .max = 48000000 }, + .num_output = ARRAY_SIZE(upll_outputs), + .output = upll_outputs, + .upll = true, +}; + +static const struct clk_programmable_layout sam9x60_programmable_layout = { + .pres_shift = 8, + .css_mask = 0x1f, + .have_slck_mck = 0, +}; + +static const struct clk_pcr_layout sam9x60_pcr_layout = { + .offset = 0x88, + .cmd = BIT(31), + .gckcss_mask = GENMASK(12, 8), + .pid_mask = GENMASK(6, 0), +}; + +static const struct { + char *n; + char *p; + u8 id; +} sam9x60_systemck[] = { + { .n = "ddrck", .p = "masterck", .id = 2 }, + { .n = "uhpck", .p = "usbck", .id = 6 }, + { .n = "pck0", .p = "prog0", .id = 8 }, + { .n = "pck1", .p = "prog1", .id = 9 }, + { .n = "qspick", .p = "masterck", .id = 19 }, +}; + +static const struct { + char *n; + u8 id; +} sam9x60_periphck[] = { + { .n = "pioA_clk", .id = 2, }, + { .n = "pioB_clk", .id = 3, }, + { .n = "pioC_clk", .id = 4, }, + { .n = "flex0_clk", .id = 5, }, + { .n = "flex1_clk", .id = 6, }, + { .n = "flex2_clk", .id = 7, }, + { .n = "flex3_clk", .id = 8, }, + { .n = "flex6_clk", .id = 9, }, + { .n = "flex7_clk", .id = 10, }, + { .n = "flex8_clk", .id = 11, }, + { .n = "sdmmc0_clk", .id = 12, }, + { .n = "flex4_clk", .id = 13, }, + { .n = "flex5_clk", .id = 14, }, + { .n = "flex9_clk", .id = 15, }, + { .n = "flex10_clk", .id = 16, }, + { .n = "tcb0_clk", .id = 17, }, + { .n = "pwm_clk", .id = 18, }, + { .n = "adc_clk", .id = 19, }, + { .n = "dma0_clk", .id = 20, }, + { .n = "matrix_clk", .id = 21, }, + { .n = "uhphs_clk", .id = 22, }, + { .n = "udphs_clk", .id = 23, }, + { .n = "macb0_clk", .id = 24, }, + { .n = "lcd_clk", .id = 25, }, + { .n = "sdmmc1_clk", .id = 26, }, + { .n = "macb1_clk", .id = 27, }, + { .n = "ssc_clk", .id = 28, }, + { .n = "can0_clk", .id = 29, }, + { .n = "can1_clk", .id = 30, }, + { .n = "flex11_clk", .id = 32, }, + { .n = "flex12_clk", .id = 33, }, + { .n = "i2s_clk", .id = 34, }, + { .n = "qspi_clk", .id = 35, }, + { .n = "gfx2d_clk", .id = 36, }, + { .n = "pit64b_clk", .id = 37, }, + { .n = "trng_clk", .id = 38, }, + { .n = "aes_clk", .id = 39, }, + { .n = "tdes_clk", .id = 40, }, + { .n = "sha_clk", .id = 41, }, + { .n = "classd_clk", .id = 42, }, + { .n = "isi_clk", .id = 43, }, + { .n = "pioD_clk", .id = 44, }, + { .n = "tcb1_clk", .id = 45, }, + { .n = "dbgu_clk", .id = 47, }, + { .n = "mpddr_clk", .id = 49, }, +}; + +static const struct { + char *n; + u8 id; + struct clk_range r; + bool pll; +} sam9x60_gck[] = { + { .n = "flex0_gclk", .id = 5, }, + { .n = "flex1_gclk", .id = 6, }, + { .n = "flex2_gclk", .id = 7, }, + { .n = "flex3_gclk", .id = 8, }, + { .n = "flex6_gclk", .id = 9, }, + { .n = "flex7_gclk", .id = 10, }, + { .n = "flex8_gclk", .id = 11, }, + { .n = "sdmmc0_gclk", .id = 12, .r = { .min = 0, .max = 105000000 }, }, + { .n = "flex4_gclk", .id = 13, }, + { .n = "flex5_gclk", .id = 14, }, + { .n = "flex9_gclk", .id = 15, }, + { .n = "flex10_gclk", .id = 16, }, + { .n = "tcb0_gclk", .id = 17, }, + { .n = "adc_gclk", .id = 19, }, + { .n = "lcd_gclk", .id = 25, .r = { .min = 0, .max = 140000000 }, }, + { .n = "sdmmc1_gclk", .id = 26, .r = { .min = 0, .max = 105000000 }, }, + { .n = "flex11_gclk", .id = 32, }, + { .n = "flex12_gclk", .id = 33, }, + { .n = "i2s_gclk", .id = 34, .r = { .min = 0, .max = 105000000 }, + .pll = true, }, + { .n = "pit64b_gclk", .id = 37, }, + { .n = "classd_gclk", .id = 42, .r = { .min = 0, .max = 100000000 }, + .pll = true, }, + { .n = "tcb1_gclk", .id = 45, }, + { .n = "dbgu_gclk", .id = 47, }, +}; + +static void __init sam9x60_pmc_setup(struct device_node *np) +{ + struct clk_range range = CLK_RANGE(0, 0); + const char *td_slck_name, *md_slck_name, *mainxtal_name; + struct pmc_data *sam9x60_pmc; + const char *parent_names[6]; + struct regmap *regmap; + struct clk_hw *hw; + int i; + bool bypass; + + i = of_property_match_string(np, "clock-names", "td_slck"); + if (i < 0) + return; + + td_slck_name = of_clk_get_parent_name(np, i); + + i = of_property_match_string(np, "clock-names", "md_slck"); + if (i < 0) + return; + + md_slck_name = of_clk_get_parent_name(np, i); + + i = of_property_match_string(np, "clock-names", "main_xtal"); + if (i < 0) + return; + mainxtal_name = of_clk_get_parent_name(np, i); + + regmap = syscon_node_to_regmap(np); + if (IS_ERR(regmap)) + return; + + sam9x60_pmc = pmc_data_allocate(PMC_MAIN + 1, + nck(sam9x60_systemck), + nck(sam9x60_periphck), + nck(sam9x60_gck)); + if (!sam9x60_pmc) + return; + + hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 24000000, + 50000000); + if (IS_ERR(hw)) + goto err_free; + + bypass = of_property_read_bool(np, "atmel,osc-bypass"); + + hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, + bypass); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = "main_rc_osc"; + parent_names[1] = "main_osc"; + hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2); + if (IS_ERR(hw)) + goto err_free; + + sam9x60_pmc->chws[PMC_MAIN] = hw; + + hw = sam9x60_clk_register_pll(regmap, &pmc_pll_lock, "pllack", + "mainck", 0, &plla_characteristics); + if (IS_ERR(hw)) + goto err_free; + + hw = sam9x60_clk_register_pll(regmap, &pmc_pll_lock, "upllck", + "main_osc", 1, &upll_characteristics); + if (IS_ERR(hw)) + goto err_free; + + sam9x60_pmc->chws[PMC_UTMI] = hw; + + parent_names[0] = md_slck_name; + parent_names[1] = "mainck"; + parent_names[2] = "pllack"; + hw = at91_clk_register_master(regmap, "masterck", 3, parent_names, + &sam9x60_master_layout, + &mck_characteristics); + if (IS_ERR(hw)) + goto err_free; + + sam9x60_pmc->chws[PMC_MCK] = hw; + + parent_names[0] = "pllack"; + parent_names[1] = "upllck"; + parent_names[2] = "mainck"; + parent_names[3] = "mainck"; + hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, 4); + if (IS_ERR(hw)) + goto err_free; + + parent_names[0] = md_slck_name; + parent_names[1] = td_slck_name; + parent_names[2] = "mainck"; + parent_names[3] = "masterck"; + parent_names[4] = "pllack"; + parent_names[5] = "upllck"; + for (i = 0; i < 8; i++) { + char name[6]; + + snprintf(name, sizeof(name), "prog%d", i); + + hw = at91_clk_register_programmable(regmap, name, + parent_names, 6, i, + &sam9x60_programmable_layout); + if (IS_ERR(hw)) + goto err_free; + } + + for (i = 0; i < ARRAY_SIZE(sam9x60_systemck); i++) { + hw = at91_clk_register_system(regmap, sam9x60_systemck[i].n, + sam9x60_systemck[i].p, + sam9x60_systemck[i].id); + if (IS_ERR(hw)) + goto err_free; + + sam9x60_pmc->shws[sam9x60_systemck[i].id] = hw; + } + + for (i = 0; i < ARRAY_SIZE(sam9x60_periphck); i++) { + hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &sam9x60_pcr_layout, + sam9x60_periphck[i].n, + "masterck", + sam9x60_periphck[i].id, + &range); + if (IS_ERR(hw)) + goto err_free; + + sam9x60_pmc->phws[sam9x60_periphck[i].id] = hw; + } + + for (i = 0; i < ARRAY_SIZE(sam9x60_gck); i++) { + hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, + &sam9x60_pcr_layout, + sam9x60_gck[i].n, + parent_names, 6, + sam9x60_gck[i].id, + sam9x60_gck[i].pll, + &sam9x60_gck[i].r); + if (IS_ERR(hw)) + goto err_free; + + sam9x60_pmc->ghws[sam9x60_gck[i].id] = hw; + } + + of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sam9x60_pmc); + + return; + +err_free: + pmc_data_free(sam9x60_pmc); +} +/* Some clks are used for a clocksource */ +CLK_OF_DECLARE(sam9x60_pmc, "microchip,sam9x60-pmc", sam9x60_pmc_setup); diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c index 81943fac4537..6509d0934804 100644 --- a/drivers/clk/at91/sama5d2.c +++ b/drivers/clk/at91/sama5d2.c @@ -16,7 +16,7 @@ static u8 plla_out[] = { 0 }; static u16 plla_icpll[] = { 0 }; -static struct clk_range plla_outputs[] = { +static const struct clk_range plla_outputs[] = { { .min = 600000000, .max = 1200000000 }, }; @@ -28,6 +28,13 @@ static const struct clk_pll_characteristics plla_characteristics = { .out = plla_out, }; +static const struct clk_pcr_layout sama5d2_pcr_layout = { + .offset = 0x10c, + .cmd = BIT(12), + .gckcss_mask = GENMASK(10, 8), + .pid_mask = GENMASK(6, 0), +}; + static const struct { char *n; char *p; @@ -274,6 +281,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np) for (i = 0; i < ARRAY_SIZE(sama5d2_periphck); i++) { hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &sama5d2_pcr_layout, sama5d2_periphck[i].n, "masterck", sama5d2_periphck[i].id, @@ -286,6 +294,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np) for (i = 0; i < ARRAY_SIZE(sama5d2_periph32ck); i++) { hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &sama5d2_pcr_layout, sama5d2_periph32ck[i].n, "h32mxck", sama5d2_periph32ck[i].id, @@ -304,6 +313,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np) parent_names[5] = "audiopll_pmcck"; for (i = 0; i < ARRAY_SIZE(sama5d2_gck); i++) { hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, + &sama5d2_pcr_layout, sama5d2_gck[i].n, parent_names, 6, sama5d2_gck[i].id, diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c index b645a9d59cdb..25b156d4e645 100644 --- a/drivers/clk/at91/sama5d4.c +++ b/drivers/clk/at91/sama5d4.c @@ -16,7 +16,7 @@ static u8 plla_out[] = { 0 }; static u16 plla_icpll[] = { 0 }; -static struct clk_range plla_outputs[] = { +static const struct clk_range plla_outputs[] = { { .min = 600000000, .max = 1200000000 }, }; @@ -28,6 +28,12 @@ static const struct clk_pll_characteristics plla_characteristics = { .out = plla_out, }; +static const struct clk_pcr_layout sama5d4_pcr_layout = { + .offset = 0x10c, + .cmd = BIT(12), + .pid_mask = GENMASK(6, 0), +}; + static const struct { char *n; char *p; @@ -232,6 +238,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np) for (i = 0; i < ARRAY_SIZE(sama5d4_periphck); i++) { hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &sama5d4_pcr_layout, sama5d4_periphck[i].n, "masterck", sama5d4_periphck[i].id, @@ -244,6 +251,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np) for (i = 0; i < ARRAY_SIZE(sama5d4_periph32ck); i++) { hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock, + &sama5d4_pcr_layout, sama5d4_periph32ck[i].n, "h32mxck", sama5d4_periph32ck[i].id, diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c index ab6ecefc49ad..e76b1d64e905 100644 --- a/drivers/clk/at91/sckc.c +++ b/drivers/clk/at91/sckc.c @@ -152,28 +152,6 @@ at91_clk_register_slow_osc(void __iomem *sckcr, return hw; } -static void __init -of_at91sam9x5_clk_slow_osc_setup(struct device_node *np, void __iomem *sckcr) -{ - struct clk_hw *hw; - const char *parent_name; - const char *name = np->name; - u32 startup; - bool bypass; - - parent_name = of_clk_get_parent_name(np, 0); - of_property_read_string(np, "clock-output-names", &name); - of_property_read_u32(np, "atmel,startup-time-usec", &startup); - bypass = of_property_read_bool(np, "atmel,osc-bypass"); - - hw = at91_clk_register_slow_osc(sckcr, name, parent_name, startup, - bypass); - if (IS_ERR(hw)) - return; - - of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); -} - static unsigned long clk_slow_rc_osc_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { @@ -266,28 +244,6 @@ at91_clk_register_slow_rc_osc(void __iomem *sckcr, return hw; } -static void __init -of_at91sam9x5_clk_slow_rc_osc_setup(struct device_node *np, void __iomem *sckcr) -{ - struct clk_hw *hw; - u32 frequency = 0; - u32 accuracy = 0; - u32 startup = 0; - const char *name = np->name; - - of_property_read_string(np, "clock-output-names", &name); - of_property_read_u32(np, "clock-frequency", &frequency); - of_property_read_u32(np, "clock-accuracy", &accuracy); - of_property_read_u32(np, "atmel,startup-time-usec", &startup); - - hw = at91_clk_register_slow_rc_osc(sckcr, name, frequency, accuracy, - startup); - if (IS_ERR(hw)) - return; - - of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); -} - static int clk_sam9x5_slow_set_parent(struct clk_hw *hw, u8 index) { struct clk_sam9x5_slow *slowck = to_clk_sam9x5_slow(hw); @@ -365,68 +321,72 @@ at91_clk_register_sam9x5_slow(void __iomem *sckcr, return hw; } -static void __init -of_at91sam9x5_clk_slow_setup(struct device_node *np, void __iomem *sckcr) +static void __init at91sam9x5_sckc_register(struct device_node *np, + unsigned int rc_osc_startup_us) { - struct clk_hw *hw; - const char *parent_names[2]; - unsigned int num_parents; - const char *name = np->name; - - num_parents = of_clk_get_parent_count(np); - if (num_parents == 0 || num_parents > 2) - return; - - of_clk_parent_fill(np, parent_names, num_parents); - - of_property_read_string(np, "clock-output-names", &name); - - hw = at91_clk_register_sam9x5_slow(sckcr, name, parent_names, - num_parents); - if (IS_ERR(hw)) - return; - - of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); -} - -static const struct of_device_id sckc_clk_ids[] __initconst = { - /* Slow clock */ - { - .compatible = "atmel,at91sam9x5-clk-slow-osc", - .data = of_at91sam9x5_clk_slow_osc_setup, - }, - { - .compatible = "atmel,at91sam9x5-clk-slow-rc-osc", - .data = of_at91sam9x5_clk_slow_rc_osc_setup, - }, - { - .compatible = "atmel,at91sam9x5-clk-slow", - .data = of_at91sam9x5_clk_slow_setup, - }, - { /*sentinel*/ } -}; - -static void __init of_at91sam9x5_sckc_setup(struct device_node *np) -{ - struct device_node *childnp; - void (*clk_setup)(struct device_node *, void __iomem *); - const struct of_device_id *clk_id; + const char *parent_names[2] = { "slow_rc_osc", "slow_osc" }; void __iomem *regbase = of_iomap(np, 0); + struct device_node *child = NULL; + const char *xtal_name; + struct clk_hw *hw; + bool bypass; if (!regbase) return; - for_each_child_of_node(np, childnp) { - clk_id = of_match_node(sckc_clk_ids, childnp); - if (!clk_id) - continue; - clk_setup = clk_id->data; - clk_setup(childnp, regbase); + hw = at91_clk_register_slow_rc_osc(regbase, parent_names[0], 32768, + 50000000, rc_osc_startup_us); + if (IS_ERR(hw)) + return; + + xtal_name = of_clk_get_parent_name(np, 0); + if (!xtal_name) { + /* DT backward compatibility */ + child = of_get_compatible_child(np, "atmel,at91sam9x5-clk-slow-osc"); + if (!child) + return; + + xtal_name = of_clk_get_parent_name(child, 0); + bypass = of_property_read_bool(child, "atmel,osc-bypass"); + + child = of_get_compatible_child(np, "atmel,at91sam9x5-clk-slow"); + } else { + bypass = of_property_read_bool(np, "atmel,osc-bypass"); } + + if (!xtal_name) + return; + + hw = at91_clk_register_slow_osc(regbase, parent_names[1], xtal_name, + 1200000, bypass); + if (IS_ERR(hw)) + return; + + hw = at91_clk_register_sam9x5_slow(regbase, "slowck", parent_names, 2); + if (IS_ERR(hw)) + return; + + of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw); + + /* DT backward compatibility */ + if (child) + of_clk_add_hw_provider(child, of_clk_hw_simple_get, hw); +} + +static void __init of_at91sam9x5_sckc_setup(struct device_node *np) +{ + at91sam9x5_sckc_register(np, 75); } CLK_OF_DECLARE(at91sam9x5_clk_sckc, "atmel,at91sam9x5-sckc", of_at91sam9x5_sckc_setup); +static void __init of_sama5d3_sckc_setup(struct device_node *np) +{ + at91sam9x5_sckc_register(np, 500); +} +CLK_OF_DECLARE(sama5d3_clk_sckc, "atmel,sama5d3-sckc", + of_sama5d3_sckc_setup); + static int clk_sama5d4_slow_osc_prepare(struct clk_hw *hw) { struct clk_sama5d4_slow_osc *osc = to_clk_sama5d4_slow_osc(hw); diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c index cdaa567c8042..fdac33a9be2f 100644 --- a/drivers/clk/clk-stm32f4.c +++ b/drivers/clk/clk-stm32f4.c @@ -300,6 +300,85 @@ static const struct stm32f4_gate_data stm32f746_gates[] __initconst = { { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" }, }; +static const struct stm32f4_gate_data stm32f769_gates[] __initconst = { + { STM32F4_RCC_AHB1ENR, 0, "gpioa", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 1, "gpiob", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 2, "gpioc", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 3, "gpiod", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 4, "gpioe", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 5, "gpiof", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 6, "gpiog", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 7, "gpioh", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 8, "gpioi", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 9, "gpioj", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 10, "gpiok", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 12, "crc", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 18, "bkpsra", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 20, "dtcmram", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 21, "dma1", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 22, "dma2", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 23, "dma2d", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 25, "ethmac", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 26, "ethmactx", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 27, "ethmacrx", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 28, "ethmacptp", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 29, "otghs", "ahb_div" }, + { STM32F4_RCC_AHB1ENR, 30, "otghsulpi", "ahb_div" }, + + { STM32F4_RCC_AHB2ENR, 0, "dcmi", "ahb_div" }, + { STM32F4_RCC_AHB2ENR, 1, "jpeg", "ahb_div" }, + { STM32F4_RCC_AHB2ENR, 4, "cryp", "ahb_div" }, + { STM32F4_RCC_AHB2ENR, 5, "hash", "ahb_div" }, + { STM32F4_RCC_AHB2ENR, 6, "rng", "pll48" }, + { STM32F4_RCC_AHB2ENR, 7, "otgfs", "pll48" }, + + { STM32F4_RCC_AHB3ENR, 0, "fmc", "ahb_div", + CLK_IGNORE_UNUSED }, + { STM32F4_RCC_AHB3ENR, 1, "qspi", "ahb_div", + CLK_IGNORE_UNUSED }, + + { STM32F4_RCC_APB1ENR, 0, "tim2", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 1, "tim3", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 2, "tim4", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 3, "tim5", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 4, "tim6", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 5, "tim7", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 6, "tim12", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 7, "tim13", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 8, "tim14", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 10, "rtcapb", "apb1_mul" }, + { STM32F4_RCC_APB1ENR, 11, "wwdg", "apb1_div" }, + { STM32F4_RCC_APB1ENR, 13, "can3", "apb1_div" }, + { STM32F4_RCC_APB1ENR, 14, "spi2", "apb1_div" }, + { STM32F4_RCC_APB1ENR, 15, "spi3", "apb1_div" }, + { STM32F4_RCC_APB1ENR, 16, "spdifrx", "apb1_div" }, + { STM32F4_RCC_APB1ENR, 25, "can1", "apb1_div" }, + { STM32F4_RCC_APB1ENR, 26, "can2", "apb1_div" }, + { STM32F4_RCC_APB1ENR, 27, "cec", "apb1_div" }, + { STM32F4_RCC_APB1ENR, 28, "pwr", "apb1_div" }, + { STM32F4_RCC_APB1ENR, 29, "dac", "apb1_div" }, + + { STM32F4_RCC_APB2ENR, 0, "tim1", "apb2_mul" }, + { STM32F4_RCC_APB2ENR, 1, "tim8", "apb2_mul" }, + { STM32F4_RCC_APB2ENR, 7, "sdmmc2", "sdmux2" }, + { STM32F4_RCC_APB2ENR, 8, "adc1", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 9, "adc2", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 10, "adc3", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 11, "sdmmc1", "sdmux1" }, + { STM32F4_RCC_APB2ENR, 12, "spi1", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 13, "spi4", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 14, "syscfg", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 16, "tim9", "apb2_mul" }, + { STM32F4_RCC_APB2ENR, 17, "tim10", "apb2_mul" }, + { STM32F4_RCC_APB2ENR, 18, "tim11", "apb2_mul" }, + { STM32F4_RCC_APB2ENR, 20, "spi5", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 21, "spi6", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 22, "sai1", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 23, "sai2", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 26, "ltdc", "apb2_div" }, + { STM32F4_RCC_APB2ENR, 30, "mdio", "apb2_div" }, +}; + /* * This bitmask tells us which bit offsets (0..192) on STM32F4[23]xxx * have gate bits associated with them. Its combined hweight is 71. @@ -318,6 +397,10 @@ static const u64 stm32f746_gate_map[MAX_GATE_MAP] = { 0x000000f17ef417ffull, 0x0000000000000003ull, 0x04f77f833e01c9ffull }; +static const u64 stm32f769_gate_map[MAX_GATE_MAP] = { 0x000000f37ef417ffull, + 0x0000000000000003ull, + 0x44F77F833E01EDFFull }; + static const u64 *stm32f4_gate_map; static struct clk_hw **clks; @@ -1048,6 +1131,10 @@ static const char *rtc_parents[4] = { "no-clock", "lse", "lsi", "hse-rtc" }; +static const char *pll_src = "pll-src"; + +static const char *pllsrc_parent[2] = { "hsi", NULL }; + static const char *dsi_parent[2] = { NULL, "pll-r" }; static const char *lcd_parent[1] = { "pllsai-r-div" }; @@ -1072,6 +1159,9 @@ static const char *uart_parents2[4] = { "apb1_div", "sys", "hsi", "lse" }; static const char *i2c_parents[4] = { "apb1_div", "sys", "hsi", "no-clock" }; +static const char * const dfsdm1_src[] = { "apb2_div", "sys" }; +static const char * const adsfdm1_parent[] = { "sai1_clk", "sai2_clk" }; + struct stm32_aux_clk { int idx; const char *name; @@ -1313,6 +1403,177 @@ static const struct stm32_aux_clk stm32f746_aux_clk[] = { }, }; +static const struct stm32_aux_clk stm32f769_aux_clk[] = { + { + CLK_LCD, "lcd-tft", lcd_parent, ARRAY_SIZE(lcd_parent), + NO_MUX, 0, 0, + STM32F4_RCC_APB2ENR, 26, + CLK_SET_RATE_PARENT + }, + { + CLK_I2S, "i2s", i2s_parents, ARRAY_SIZE(i2s_parents), + STM32F4_RCC_CFGR, 23, 1, + NO_GATE, 0, + CLK_SET_RATE_PARENT + }, + { + CLK_SAI1, "sai1_clk", sai_parents, ARRAY_SIZE(sai_parents), + STM32F4_RCC_DCKCFGR, 20, 3, + STM32F4_RCC_APB2ENR, 22, + CLK_SET_RATE_PARENT + }, + { + CLK_SAI2, "sai2_clk", sai_parents, ARRAY_SIZE(sai_parents), + STM32F4_RCC_DCKCFGR, 22, 3, + STM32F4_RCC_APB2ENR, 23, + CLK_SET_RATE_PARENT + }, + { + NO_IDX, "pll48", pll48_parents, ARRAY_SIZE(pll48_parents), + STM32F7_RCC_DCKCFGR2, 27, 1, + NO_GATE, 0, + 0 + }, + { + NO_IDX, "sdmux1", sdmux_parents, ARRAY_SIZE(sdmux_parents), + STM32F7_RCC_DCKCFGR2, 28, 1, + NO_GATE, 0, + 0 + }, + { + NO_IDX, "sdmux2", sdmux_parents, ARRAY_SIZE(sdmux_parents), + STM32F7_RCC_DCKCFGR2, 29, 1, + NO_GATE, 0, + 0 + }, + { + CLK_HDMI_CEC, "hdmi-cec", + hdmi_parents, ARRAY_SIZE(hdmi_parents), + STM32F7_RCC_DCKCFGR2, 26, 1, + NO_GATE, 0, + 0 + }, + { + CLK_SPDIF, "spdif-rx", + spdif_parent, ARRAY_SIZE(spdif_parent), + STM32F7_RCC_DCKCFGR2, 22, 3, + STM32F4_RCC_APB2ENR, 23, + CLK_SET_RATE_PARENT + }, + { + CLK_USART1, "usart1", + uart_parents1, ARRAY_SIZE(uart_parents1), + STM32F7_RCC_DCKCFGR2, 0, 3, + STM32F4_RCC_APB2ENR, 4, + CLK_SET_RATE_PARENT, + }, + { + CLK_USART2, "usart2", + uart_parents2, ARRAY_SIZE(uart_parents1), + STM32F7_RCC_DCKCFGR2, 2, 3, + STM32F4_RCC_APB1ENR, 17, + CLK_SET_RATE_PARENT, + }, + { + CLK_USART3, "usart3", + uart_parents2, ARRAY_SIZE(uart_parents1), + STM32F7_RCC_DCKCFGR2, 4, 3, + STM32F4_RCC_APB1ENR, 18, + CLK_SET_RATE_PARENT, + }, + { + CLK_UART4, "uart4", + uart_parents2, ARRAY_SIZE(uart_parents1), + STM32F7_RCC_DCKCFGR2, 6, 3, + STM32F4_RCC_APB1ENR, 19, + CLK_SET_RATE_PARENT, + }, + { + CLK_UART5, "uart5", + uart_parents2, ARRAY_SIZE(uart_parents1), + STM32F7_RCC_DCKCFGR2, 8, 3, + STM32F4_RCC_APB1ENR, 20, + CLK_SET_RATE_PARENT, + }, + { + CLK_USART6, "usart6", + uart_parents1, ARRAY_SIZE(uart_parents1), + STM32F7_RCC_DCKCFGR2, 10, 3, + STM32F4_RCC_APB2ENR, 5, + CLK_SET_RATE_PARENT, + }, + { + CLK_UART7, "uart7", + uart_parents2, ARRAY_SIZE(uart_parents1), + STM32F7_RCC_DCKCFGR2, 12, 3, + STM32F4_RCC_APB1ENR, 30, + CLK_SET_RATE_PARENT, + }, + { + CLK_UART8, "uart8", + uart_parents2, ARRAY_SIZE(uart_parents1), + STM32F7_RCC_DCKCFGR2, 14, 3, + STM32F4_RCC_APB1ENR, 31, + CLK_SET_RATE_PARENT, + }, + { + CLK_I2C1, "i2c1", + i2c_parents, ARRAY_SIZE(i2c_parents), + STM32F7_RCC_DCKCFGR2, 16, 3, + STM32F4_RCC_APB1ENR, 21, + CLK_SET_RATE_PARENT, + }, + { + CLK_I2C2, "i2c2", + i2c_parents, ARRAY_SIZE(i2c_parents), + STM32F7_RCC_DCKCFGR2, 18, 3, + STM32F4_RCC_APB1ENR, 22, + CLK_SET_RATE_PARENT, + }, + { + CLK_I2C3, "i2c3", + i2c_parents, ARRAY_SIZE(i2c_parents), + STM32F7_RCC_DCKCFGR2, 20, 3, + STM32F4_RCC_APB1ENR, 23, + CLK_SET_RATE_PARENT, + }, + { + CLK_I2C4, "i2c4", + i2c_parents, ARRAY_SIZE(i2c_parents), + STM32F7_RCC_DCKCFGR2, 22, 3, + STM32F4_RCC_APB1ENR, 24, + CLK_SET_RATE_PARENT, + }, + { + CLK_LPTIMER, "lptim1", + lptim_parent, ARRAY_SIZE(lptim_parent), + STM32F7_RCC_DCKCFGR2, 24, 3, + STM32F4_RCC_APB1ENR, 9, + CLK_SET_RATE_PARENT + }, + { + CLK_F769_DSI, "dsi", + dsi_parent, ARRAY_SIZE(dsi_parent), + STM32F7_RCC_DCKCFGR2, 0, 1, + STM32F4_RCC_APB2ENR, 27, + CLK_SET_RATE_PARENT + }, + { + CLK_DFSDM1, "dfsdm1", + dfsdm1_src, ARRAY_SIZE(dfsdm1_src), + STM32F4_RCC_DCKCFGR, 25, 1, + STM32F4_RCC_APB2ENR, 29, + CLK_SET_RATE_PARENT + }, + { + CLK_ADFSDM1, "adfsdm1", + adsfdm1_parent, ARRAY_SIZE(adsfdm1_parent), + STM32F4_RCC_DCKCFGR, 26, 1, + STM32F4_RCC_APB2ENR, 29, + CLK_SET_RATE_PARENT + }, +}; + static const struct stm32f4_clk_data stm32f429_clk_data = { .end_primary = END_PRIMARY_CLK, .gates_data = stm32f429_gates, @@ -1343,6 +1604,16 @@ static const struct stm32f4_clk_data stm32f746_clk_data = { .aux_clk_num = ARRAY_SIZE(stm32f746_aux_clk), }; +static const struct stm32f4_clk_data stm32f769_clk_data = { + .end_primary = END_PRIMARY_CLK_F7, + .gates_data = stm32f769_gates, + .gates_map = stm32f769_gate_map, + .gates_num = ARRAY_SIZE(stm32f769_gates), + .pll_data = stm32f469_pll, + .aux_clk = stm32f769_aux_clk, + .aux_clk_num = ARRAY_SIZE(stm32f769_aux_clk), +}; + static const struct of_device_id stm32f4_of_match[] = { { .compatible = "st,stm32f42xx-rcc", @@ -1356,6 +1627,10 @@ static const struct of_device_id stm32f4_of_match[] = { .compatible = "st,stm32f746-rcc", .data = &stm32f746_clk_data }, + { + .compatible = "st,stm32f769-rcc", + .data = &stm32f769_clk_data + }, {} }; @@ -1427,9 +1702,8 @@ static void __init stm32f4_rcc_init(struct device_node *np) int n; const struct of_device_id *match; const struct stm32f4_clk_data *data; - unsigned long pllcfgr; - const char *pllsrc; unsigned long pllm; + struct clk_hw *pll_src_hw; base = of_iomap(np, 0); if (!base) { @@ -1460,21 +1734,33 @@ static void __init stm32f4_rcc_init(struct device_node *np) hse_clk = of_clk_get_parent_name(np, 0); dsi_parent[0] = hse_clk; + pllsrc_parent[1] = hse_clk; i2s_in_clk = of_clk_get_parent_name(np, 1); i2s_parents[1] = i2s_in_clk; sai_parents[2] = i2s_in_clk; + if (of_device_is_compatible(np, "st,stm32f769-rcc")) { + clk_hw_register_gate(NULL, "dfsdm1_apb", "apb2_div", 0, + base + STM32F4_RCC_APB2ENR, 29, + CLK_IGNORE_UNUSED, &stm32f4_clk_lock); + dsi_parent[0] = pll_src; + sai_parents[3] = pll_src; + } + clks[CLK_HSI] = clk_hw_register_fixed_rate_with_accuracy(NULL, "hsi", NULL, 0, 16000000, 160000); - pllcfgr = readl(base + STM32F4_RCC_PLLCFGR); - pllsrc = pllcfgr & BIT(22) ? hse_clk : "hsi"; - pllm = pllcfgr & 0x3f; + pll_src_hw = clk_hw_register_mux(NULL, pll_src, pllsrc_parent, + ARRAY_SIZE(pllsrc_parent), 0, + base + STM32F4_RCC_PLLCFGR, 22, 1, 0, + &stm32f4_clk_lock); - clk_hw_register_fixed_factor(NULL, "vco_in", pllsrc, - 0, 1, pllm); + pllm = readl(base + STM32F4_RCC_PLLCFGR) & 0x3f; + + clk_hw_register_fixed_factor(NULL, "vco_in", pll_src, + 0, 1, pllm); stm32f4_rcc_register_pll("vco_in", &data->pll_data[0], &stm32f4_clk_lock); @@ -1612,12 +1898,16 @@ static void __init stm32f4_rcc_init(struct device_node *np) clks[aux_clk->idx] = hw; } - if (of_device_is_compatible(np, "st,stm32f746-rcc")) + if (of_device_is_compatible(np, "st,stm32f746-rcc")) { clk_hw_register_fixed_factor(NULL, "hsi_div488", "hsi", 0, 1, 488); + clks[CLK_PLL_SRC] = pll_src_hw; + } + of_clk_add_hw_provider(np, stm32f4_rcc_lookup_clk, NULL); + return; fail: kfree(clks); @@ -1626,3 +1916,4 @@ fail: CLK_OF_DECLARE_DRIVER(stm32f42xx_rcc, "st,stm32f42xx-rcc", stm32f4_rcc_init); CLK_OF_DECLARE_DRIVER(stm32f46xx_rcc, "st,stm32f469-rcc", stm32f4_rcc_init); CLK_OF_DECLARE_DRIVER(stm32f746_rcc, "st,stm32f746-rcc", stm32f4_rcc_init); +CLK_OF_DECLARE_DRIVER(stm32f769_rcc, "st,stm32f769-rcc", stm32f4_rcc_init); diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c index a0ae8dc16909..a875649df8b8 100644 --- a/drivers/clk/clk-stm32mp1.c +++ b/drivers/clk/clk-stm32mp1.c @@ -1402,6 +1402,7 @@ enum { G_CRYP1, G_HASH1, G_BKPSRAM, + G_DDRPERFM, G_LAST }; @@ -1488,6 +1489,7 @@ static struct stm32_gate_cfg per_gate_cfg[G_LAST] = { K_GATE(G_STGENRO, RCC_APB4ENSETR, 20, 0), K_MGATE(G_USBPHY, RCC_APB4ENSETR, 16, 0), K_GATE(G_IWDG2, RCC_APB4ENSETR, 15, 0), + K_GATE(G_DDRPERFM, RCC_APB4ENSETR, 8, 0), K_MGATE(G_DSI, RCC_APB4ENSETR, 4, 0), K_MGATE(G_LTDC, RCC_APB4ENSETR, 0, 0), @@ -1899,6 +1901,7 @@ static const struct clock_config stm32mp1_clock_cfg[] = { PCLK(CRC1, "crc1", "ck_axi", 0, G_CRC1), PCLK(USBH, "usbh", "ck_axi", 0, G_USBH), PCLK(ETHSTP, "ethstp", "ck_axi", 0, G_ETHSTP), + PCLK(DDRPERFM, "ddrperfm", "pclk4", 0, G_DDRPERFM), /* Kernel clocks */ KCLK(SDMMC1_K, "sdmmc1_k", sdmmc12_src, 0, G_SDMMC1, M_SDMMC12), diff --git a/drivers/clk/davinci/pll.h b/drivers/clk/davinci/pll.h index 7cc354dd29e2..c2a453caa131 100644 --- a/drivers/clk/davinci/pll.h +++ b/drivers/clk/davinci/pll.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Clock driver for TI Davinci PSC controllers * diff --git a/drivers/clk/davinci/psc.h b/drivers/clk/davinci/psc.h index cc5614567a70..69070f834391 100644 --- a/drivers/clk/davinci/psc.h +++ b/drivers/clk/davinci/psc.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Clock driver for TI Davinci PSC controllers * diff --git a/drivers/clk/qcom/clk-regmap-mux-div.h b/drivers/clk/qcom/clk-regmap-mux-div.h index 6cd6261be7ac..4df6c8d24c24 100644 --- a/drivers/clk/qcom/clk-regmap-mux-div.h +++ b/drivers/clk/qcom/clk-regmap-mux-div.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2017, Linaro Limited * Author: Georgi Djakov diff --git a/drivers/clk/renesas/rcar-gen2-cpg.h b/drivers/clk/renesas/rcar-gen2-cpg.h index bff9551c7a38..db2f57ef2f99 100644 --- a/drivers/clk/renesas/rcar-gen2-cpg.h +++ b/drivers/clk/renesas/rcar-gen2-cpg.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * R-Car Gen2 Clock Pulse Generator * * Copyright (C) 2016 Cogent Embedded Inc. diff --git a/drivers/clk/renesas/rcar-gen3-cpg.h b/drivers/clk/renesas/rcar-gen3-cpg.h index 15700d219a05..c4ac80cac6a0 100644 --- a/drivers/clk/renesas/rcar-gen3-cpg.h +++ b/drivers/clk/renesas/rcar-gen3-cpg.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * R-Car Gen3 Clock Pulse Generator * * Copyright (C) 2015-2018 Glider bvba diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h index c4ec9df146fd..4ddcdf3bfb95 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.h +++ b/drivers/clk/renesas/renesas-cpg-mssr.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 - * +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Renesas Clock Pulse Generator / Module Standby and Software Reset * * Copyright (C) 2015 Glider bvba diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig new file mode 100644 index 000000000000..8db4a3eb4782 --- /dev/null +++ b/drivers/clk/sifive/Kconfig @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 + +menuconfig CLK_SIFIVE + bool "SiFive SoC driver support" + help + SoC drivers for SiFive Linux-capable SoCs. + +if CLK_SIFIVE + +config CLK_SIFIVE_FU540_PRCI + bool "PRCI driver for SiFive FU540 SoCs" + select CLK_ANALOGBITS_WRPLL_CLN28HPC + help + Supports the Power Reset Clock interface (PRCI) IP block found in + FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, + enable this driver. + +endif diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile new file mode 100644 index 000000000000..74d58a4c0756 --- /dev/null +++ b/drivers/clk/sifive/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c new file mode 100644 index 000000000000..0ec8bf7b4b28 --- /dev/null +++ b/drivers/clk/sifive/fu540-prci.c @@ -0,0 +1,626 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018-2019 SiFive, Inc. + * Wesley Terpstra + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * The FU540 PRCI implements clock and reset control for the SiFive + * FU540-C000 chip. This driver assumes that it has sole control + * over all PRCI resources. + * + * This driver is based on the PRCI driver written by Wesley Terpstra: + * https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60 + * + * References: + * - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset" + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects: + * hfclk and rtcclk + */ +#define EXPECTED_CLK_PARENT_COUNT 2 + +/* + * Register offsets and bitmasks + */ + +/* COREPLLCFG0 */ +#define PRCI_COREPLLCFG0_OFFSET 0x4 +# define PRCI_COREPLLCFG0_DIVR_SHIFT 0 +# define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT) +# define PRCI_COREPLLCFG0_DIVF_SHIFT 6 +# define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT) +# define PRCI_COREPLLCFG0_DIVQ_SHIFT 15 +# define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT) +# define PRCI_COREPLLCFG0_RANGE_SHIFT 18 +# define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT) +# define PRCI_COREPLLCFG0_BYPASS_SHIFT 24 +# define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT) +# define PRCI_COREPLLCFG0_FSE_SHIFT 25 +# define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT) +# define PRCI_COREPLLCFG0_LOCK_SHIFT 31 +# define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT) + +/* DDRPLLCFG0 */ +#define PRCI_DDRPLLCFG0_OFFSET 0xc +# define PRCI_DDRPLLCFG0_DIVR_SHIFT 0 +# define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT) +# define PRCI_DDRPLLCFG0_DIVF_SHIFT 6 +# define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT) +# define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15 +# define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT) +# define PRCI_DDRPLLCFG0_RANGE_SHIFT 18 +# define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT) +# define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24 +# define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT) +# define PRCI_DDRPLLCFG0_FSE_SHIFT 25 +# define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT) +# define PRCI_DDRPLLCFG0_LOCK_SHIFT 31 +# define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT) + +/* DDRPLLCFG1 */ +#define PRCI_DDRPLLCFG1_OFFSET 0x10 +# define PRCI_DDRPLLCFG1_CKE_SHIFT 24 +# define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT) + +/* GEMGXLPLLCFG0 */ +#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c +# define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0 +# define PRCI_GEMGXLPLLCFG0_DIVR_MASK (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT) +# define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6 +# define PRCI_GEMGXLPLLCFG0_DIVF_MASK (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT) +# define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15 +# define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT) +# define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18 +# define PRCI_GEMGXLPLLCFG0_RANGE_MASK (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT) +# define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24 +# define PRCI_GEMGXLPLLCFG0_BYPASS_MASK (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT) +# define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25 +# define PRCI_GEMGXLPLLCFG0_FSE_MASK (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT) +# define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31 +# define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT) + +/* GEMGXLPLLCFG1 */ +#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20 +# define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 24 +# define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT) + +/* CORECLKSEL */ +#define PRCI_CORECLKSEL_OFFSET 0x24 +# define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0 +# define PRCI_CORECLKSEL_CORECLKSEL_MASK (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT) + +/* DEVICESRESETREG */ +#define PRCI_DEVICESRESETREG_OFFSET 0x28 +# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0 +# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT) +# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1 +# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT) +# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2 +# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT) +# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3 +# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT) +# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5 +# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT) + +/* CLKMUXSTATUSREG */ +#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c +# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1 +# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT) + +/* + * Private structures + */ + +/** + * struct __prci_data - per-device-instance data + * @va: base virtual address of the PRCI IP block + * @hw_clks: encapsulates struct clk_hw records + * + * PRCI per-device instance data + */ +struct __prci_data { + void __iomem *va; + struct clk_hw_onecell_data hw_clks; +}; + +/** + * struct __prci_wrpll_data - WRPLL configuration and integration data + * @c: WRPLL current configuration record + * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL) + * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL) + * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address + * + * @enable_bypass and @disable_bypass are used for WRPLL instances + * that contain a separate external glitchless clock mux downstream + * from the PLL. The WRPLL internal bypass mux is not glitchless. + */ +struct __prci_wrpll_data { + struct wrpll_cfg c; + void (*enable_bypass)(struct __prci_data *pd); + void (*disable_bypass)(struct __prci_data *pd); + u8 cfg0_offs; +}; + +/** + * struct __prci_clock - describes a clock device managed by PRCI + * @name: user-readable clock name string - should match the manual + * @parent_name: parent name for this clock + * @ops: struct clk_ops for the Linux clock framework to use for control + * @hw: Linux-private clock data + * @pwd: WRPLL-specific data, associated with this clock (if not NULL) + * @pd: PRCI-specific data associated with this clock (if not NULL) + * + * PRCI clock data. Used by the PRCI driver to register PRCI-provided + * clocks to the Linux clock infrastructure. + */ +struct __prci_clock { + const char *name; + const char *parent_name; + const struct clk_ops *ops; + struct clk_hw hw; + struct __prci_wrpll_data *pwd; + struct __prci_data *pd; +}; + +#define clk_hw_to_prci_clock(pwd) container_of(pwd, struct __prci_clock, hw) + +/* + * Private functions + */ + +/** + * __prci_readl() - read from a PRCI register + * @pd: PRCI context + * @offs: register offset to read from (in bytes, from PRCI base address) + * + * Read the register located at offset @offs from the base virtual + * address of the PRCI register target described by @pd, and return + * the value to the caller. + * + * Context: Any context. + * + * Return: the contents of the register described by @pd and @offs. + */ +static u32 __prci_readl(struct __prci_data *pd, u32 offs) +{ + return readl_relaxed(pd->va + offs); +} + +static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd) +{ + writel_relaxed(v, pd->va + offs); +} + +/* WRPLL-related private functions */ + +/** + * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters + * @c: ptr to a struct wrpll_cfg record to write config into + * @r: value read from the PRCI PLL configuration register + * + * Given a value @r read from an FU540 PRCI PLL configuration register, + * split it into fields and populate it into the WRPLL configuration record + * pointed to by @c. + * + * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros + * have the same register layout. + * + * Context: Any context. + */ +static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r) +{ + u32 v; + + v = r & PRCI_COREPLLCFG0_DIVR_MASK; + v >>= PRCI_COREPLLCFG0_DIVR_SHIFT; + c->divr = v; + + v = r & PRCI_COREPLLCFG0_DIVF_MASK; + v >>= PRCI_COREPLLCFG0_DIVF_SHIFT; + c->divf = v; + + v = r & PRCI_COREPLLCFG0_DIVQ_MASK; + v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT; + c->divq = v; + + v = r & PRCI_COREPLLCFG0_RANGE_MASK; + v >>= PRCI_COREPLLCFG0_RANGE_SHIFT; + c->range = v; + + c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK | + WRPLL_FLAGS_EXT_FEEDBACK_MASK); + + /* external feedback mode not supported */ + c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK; +} + +/** + * __prci_wrpll_pack() - pack PLL configuration parameters into a register value + * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg + * + * Using a set of WRPLL configuration values pointed to by @c, + * assemble a PRCI PLL configuration register value, and return it to + * the caller. + * + * Context: Any context. Caller must ensure that the contents of the + * record pointed to by @c do not change during the execution + * of this function. + * + * Returns: a value suitable for writing into a PRCI PLL configuration + * register + */ +static u32 __prci_wrpll_pack(const struct wrpll_cfg *c) +{ + u32 r = 0; + + r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT; + r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT; + r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT; + r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT; + + /* external feedback mode not supported */ + r |= PRCI_COREPLLCFG0_FSE_MASK; + + return r; +} + +/** + * __prci_wrpll_read_cfg() - read the WRPLL configuration from the PRCI + * @pd: PRCI context + * @pwd: PRCI WRPLL metadata + * + * Read the current configuration of the PLL identified by @pwd from + * the PRCI identified by @pd, and store it into the local configuration + * cache in @pwd. + * + * Context: Any context. Caller must prevent the records pointed to by + * @pd and @pwd from changing during execution. + */ +static void __prci_wrpll_read_cfg(struct __prci_data *pd, + struct __prci_wrpll_data *pwd) +{ + __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs)); +} + +/** + * __prci_wrpll_write_cfg() - write WRPLL configuration into the PRCI + * @pd: PRCI context + * @pwd: PRCI WRPLL metadata + * @c: WRPLL configuration record to write + * + * Write the WRPLL configuration described by @c into the WRPLL + * configuration register identified by @pwd in the PRCI instance + * described by @c. Make a cached copy of the WRPLL's current + * configuration so it can be used by other code. + * + * Context: Any context. Caller must prevent the records pointed to by + * @pd and @pwd from changing during execution. + */ +static void __prci_wrpll_write_cfg(struct __prci_data *pd, + struct __prci_wrpll_data *pwd, + struct wrpll_cfg *c) +{ + __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd); + + memcpy(&pwd->c, c, sizeof(*c)); +} + +/* Core clock mux control */ + +/** + * __prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK + * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg + * + * Switch the CORECLK mux to the HFCLK input source; return once complete. + * + * Context: Any context. Caller must prevent concurrent changes to the + * PRCI_CORECLKSEL_OFFSET register. + */ +static void __prci_coreclksel_use_hfclk(struct __prci_data *pd) +{ + u32 r; + + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); + r |= PRCI_CORECLKSEL_CORECLKSEL_MASK; + __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); + + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ +} + +/** + * __prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL + * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg + * + * Switch the CORECLK mux to the PLL output clock; return once complete. + * + * Context: Any context. Caller must prevent concurrent changes to the + * PRCI_CORECLKSEL_OFFSET register. + */ +static void __prci_coreclksel_use_corepll(struct __prci_data *pd) +{ + u32 r; + + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); + r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK; + __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd); + + r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */ +} + +/* + * Linux clock framework integration + * + * See the Linux clock framework documentation for more information on + * these functions. + */ + +static unsigned long sifive_fu540_prci_wrpll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct __prci_clock *pc = clk_hw_to_prci_clock(hw); + struct __prci_wrpll_data *pwd = pc->pwd; + + return wrpll_calc_output_rate(&pwd->c, parent_rate); +} + +static long sifive_fu540_prci_wrpll_round_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *parent_rate) +{ + struct __prci_clock *pc = clk_hw_to_prci_clock(hw); + struct __prci_wrpll_data *pwd = pc->pwd; + struct wrpll_cfg c; + + memcpy(&c, &pwd->c, sizeof(c)); + + wrpll_configure_for_rate(&c, rate, *parent_rate); + + return wrpll_calc_output_rate(&c, *parent_rate); +} + +static int sifive_fu540_prci_wrpll_set_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate) +{ + struct __prci_clock *pc = clk_hw_to_prci_clock(hw); + struct __prci_wrpll_data *pwd = pc->pwd; + struct __prci_data *pd = pc->pd; + int r; + + r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate); + if (r) + return r; + + if (pwd->enable_bypass) + pwd->enable_bypass(pd); + + __prci_wrpll_write_cfg(pd, pwd, &pwd->c); + + udelay(wrpll_calc_max_lock_us(&pwd->c)); + + if (pwd->disable_bypass) + pwd->disable_bypass(pd); + + return 0; +} + +static const struct clk_ops sifive_fu540_prci_wrpll_clk_ops = { + .set_rate = sifive_fu540_prci_wrpll_set_rate, + .round_rate = sifive_fu540_prci_wrpll_round_rate, + .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate, +}; + +static const struct clk_ops sifive_fu540_prci_wrpll_ro_clk_ops = { + .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate, +}; + +/* TLCLKSEL clock integration */ + +static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct __prci_clock *pc = clk_hw_to_prci_clock(hw); + struct __prci_data *pd = pc->pd; + u32 v; + u8 div; + + v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET); + v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK; + div = v ? 1 : 2; + + return div_u64(parent_rate, div); +} + +static const struct clk_ops sifive_fu540_prci_tlclksel_clk_ops = { + .recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate, +}; + +/* + * PRCI integration data for each WRPLL instance + */ + +static struct __prci_wrpll_data __prci_corepll_data = { + .cfg0_offs = PRCI_COREPLLCFG0_OFFSET, + .enable_bypass = __prci_coreclksel_use_hfclk, + .disable_bypass = __prci_coreclksel_use_corepll, +}; + +static struct __prci_wrpll_data __prci_ddrpll_data = { + .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET, +}; + +static struct __prci_wrpll_data __prci_gemgxlpll_data = { + .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET, +}; + +/* + * List of clock controls provided by the PRCI + */ + +static struct __prci_clock __prci_init_clocks[] = { + [PRCI_CLK_COREPLL] = { + .name = "corepll", + .parent_name = "hfclk", + .ops = &sifive_fu540_prci_wrpll_clk_ops, + .pwd = &__prci_corepll_data, + }, + [PRCI_CLK_DDRPLL] = { + .name = "ddrpll", + .parent_name = "hfclk", + .ops = &sifive_fu540_prci_wrpll_ro_clk_ops, + .pwd = &__prci_ddrpll_data, + }, + [PRCI_CLK_GEMGXLPLL] = { + .name = "gemgxlpll", + .parent_name = "hfclk", + .ops = &sifive_fu540_prci_wrpll_clk_ops, + .pwd = &__prci_gemgxlpll_data, + }, + [PRCI_CLK_TLCLK] = { + .name = "tlclk", + .parent_name = "corepll", + .ops = &sifive_fu540_prci_tlclksel_clk_ops, + }, +}; + +/** + * __prci_register_clocks() - register clock controls in the PRCI with Linux + * @dev: Linux struct device * + * + * Register the list of clock controls described in __prci_init_plls[] with + * the Linux clock framework. + * + * Return: 0 upon success or a negative error code upon failure. + */ +static int __prci_register_clocks(struct device *dev, struct __prci_data *pd) +{ + struct clk_init_data init = { }; + struct __prci_clock *pic; + int parent_count, i, r; + + parent_count = of_clk_get_parent_count(dev->of_node); + if (parent_count != EXPECTED_CLK_PARENT_COUNT) { + dev_err(dev, "expected only two parent clocks, found %d\n", + parent_count); + return -EINVAL; + } + + /* Register PLLs */ + for (i = 0; i < ARRAY_SIZE(__prci_init_clocks); ++i) { + pic = &__prci_init_clocks[i]; + + init.name = pic->name; + init.parent_names = &pic->parent_name; + init.num_parents = 1; + init.ops = pic->ops; + pic->hw.init = &init; + + pic->pd = pd; + + if (pic->pwd) + __prci_wrpll_read_cfg(pd, pic->pwd); + + r = devm_clk_hw_register(dev, &pic->hw); + if (r) { + dev_warn(dev, "Failed to register clock %s: %d\n", + init.name, r); + return r; + } + + r = clk_hw_register_clkdev(&pic->hw, pic->name, dev_name(dev)); + if (r) { + dev_warn(dev, "Failed to register clkdev for %s: %d\n", + init.name, r); + return r; + } + + pd->hw_clks.hws[i] = &pic->hw; + } + + pd->hw_clks.num = i; + + r = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &pd->hw_clks); + if (r) { + dev_err(dev, "could not add hw_provider: %d\n", r); + return r; + } + + return 0; +} + +/* + * Linux device model integration + * + * See the Linux device model documentation for more information about + * these functions. + */ +static int sifive_fu540_prci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct __prci_data *pd; + int r; + + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pd->va = devm_ioremap_resource(dev, res); + if (IS_ERR(pd->va)) + return PTR_ERR(pd->va); + + r = __prci_register_clocks(dev, pd); + if (r) { + dev_err(dev, "could not register clocks: %d\n", r); + return r; + } + + dev_dbg(dev, "SiFive FU540 PRCI probed\n"); + + return 0; +} + +static const struct of_device_id sifive_fu540_prci_of_match[] = { + { .compatible = "sifive,fu540-c000-prci", }, + {} +}; +MODULE_DEVICE_TABLE(of, sifive_fu540_prci_of_match); + +static struct platform_driver sifive_fu540_prci_driver = { + .driver = { + .name = "sifive-fu540-prci", + .of_match_table = sifive_fu540_prci_of_match, + }, + .probe = sifive_fu540_prci_probe, +}; + +static int __init sifive_fu540_prci_init(void) +{ + return platform_driver_register(&sifive_fu540_prci_driver); +} +core_initcall(sifive_fu540_prci_init); diff --git a/drivers/clk/sprd/common.h b/drivers/clk/sprd/common.h index abd9ff5ef448..1d077b39cef6 100644 --- a/drivers/clk/sprd/common.h +++ b/drivers/clk/sprd/common.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ // // Spreadtrum clock infrastructure // diff --git a/drivers/clk/sprd/composite.h b/drivers/clk/sprd/composite.h index 0984e9e252dc..04ab3f587ee2 100644 --- a/drivers/clk/sprd/composite.h +++ b/drivers/clk/sprd/composite.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ // // Spreadtrum composite clock driver // diff --git a/drivers/clk/sprd/div.h b/drivers/clk/sprd/div.h index b3033d24d431..87510e3d0e14 100644 --- a/drivers/clk/sprd/div.h +++ b/drivers/clk/sprd/div.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ // // Spreadtrum divider clock driver // diff --git a/drivers/clk/sprd/gate.h b/drivers/clk/sprd/gate.h index 2e582c68a08b..dc352ea55e1f 100644 --- a/drivers/clk/sprd/gate.h +++ b/drivers/clk/sprd/gate.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ // // Spreadtrum gate clock driver // diff --git a/drivers/clk/sprd/mux.h b/drivers/clk/sprd/mux.h index 548cfa0f145c..892e4191cc7f 100644 --- a/drivers/clk/sprd/mux.h +++ b/drivers/clk/sprd/mux.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ // // Spreadtrum multiplexer clock driver // diff --git a/drivers/clk/sprd/pll.h b/drivers/clk/sprd/pll.h index 514175621099..e95f11e91ffe 100644 --- a/drivers/clk/sprd/pll.h +++ b/drivers/clk/sprd/pll.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ // // Spreadtrum pll clock driver // diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6.h index 2ccfe4428260..9406f9a6a8aa 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.h +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2016 Icenowy Zheng */ diff --git a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h index 39d06fed55b2..b22484f1bb9a 100644 --- a/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h +++ b/drivers/clk/sunxi-ng/ccu-suniv-f1c100s.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0+ - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright 2017 Icenowy Zheng * */ diff --git a/drivers/clk/tegra/clk-divider.c b/drivers/clk/tegra/clk-divider.c index 205fe8ff63f0..2a1822a22740 100644 --- a/drivers/clk/tegra/clk-divider.c +++ b/drivers/clk/tegra/clk-divider.c @@ -175,6 +175,7 @@ struct clk *tegra_clk_register_mc(const char *name, const char *parent_name, void __iomem *reg, spinlock_t *lock) { return clk_register_divider_table(NULL, name, parent_name, - CLK_IS_CRITICAL, reg, 16, 1, 0, + CLK_IS_CRITICAL, + reg, 16, 1, CLK_DIVIDER_READ_ONLY, mc_div_table, lock); } diff --git a/drivers/clk/tegra/clk-emc.c b/drivers/clk/tegra/clk-emc.c index 0621a3a82ea6..93ecb538e59b 100644 --- a/drivers/clk/tegra/clk-emc.c +++ b/drivers/clk/tegra/clk-emc.c @@ -121,18 +121,28 @@ static int emc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) struct tegra_clk_emc *tegra; u8 ram_code = tegra_read_ram_code(); struct emc_timing *timing = NULL; - int i; + int i, k, t; tegra = container_of(hw, struct tegra_clk_emc, hw); - for (i = 0; i < tegra->num_timings; i++) { - if (tegra->timings[i].ram_code != ram_code) - continue; + for (k = 0; k < tegra->num_timings; k++) { + if (tegra->timings[k].ram_code == ram_code) + break; + } + for (t = k; t < tegra->num_timings; t++) { + if (tegra->timings[t].ram_code != ram_code) + break; + } + + for (i = k; i < t; i++) { timing = tegra->timings + i; + if (timing->rate < req->rate && i != t - 1) + continue; + if (timing->rate > req->max_rate) { - i = max(i, 1); + i = max(i, k + 1); req->rate = tegra->timings[i - 1].rate; return 0; } @@ -140,10 +150,8 @@ static int emc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) if (timing->rate < req->min_rate) continue; - if (timing->rate >= req->rate) { - req->rate = timing->rate; - return 0; - } + req->rate = timing->rate; + return 0; } if (timing) { @@ -214,7 +222,10 @@ static int emc_set_timing(struct tegra_clk_emc *tegra, if (emc_get_parent(&tegra->hw) == timing->parent_index && clk_get_rate(timing->parent) != timing->parent_rate) { - BUG(); + WARN_ONCE(1, "parent %s rate mismatch %lu %lu\n", + __clk_get_name(timing->parent), + clk_get_rate(timing->parent), + timing->parent_rate); return -EINVAL; } @@ -282,7 +293,7 @@ static struct emc_timing *get_backup_timing(struct tegra_clk_emc *tegra, for (i = timing_index+1; i < tegra->num_timings; i++) { timing = tegra->timings + i; if (timing->ram_code != ram_code) - continue; + break; if (emc_parent_clk_sources[timing->parent_index] != emc_parent_clk_sources[ @@ -293,7 +304,7 @@ static struct emc_timing *get_backup_timing(struct tegra_clk_emc *tegra, for (i = timing_index-1; i >= 0; --i) { timing = tegra->timings + i; if (timing->ram_code != ram_code) - continue; + break; if (emc_parent_clk_sources[timing->parent_index] != emc_parent_clk_sources[ @@ -433,19 +444,23 @@ static int load_timings_from_dt(struct tegra_clk_emc *tegra, struct device_node *node, u32 ram_code) { + struct emc_timing *timings_ptr; struct device_node *child; int child_count = of_get_child_count(node); int i = 0, err; + size_t size; - tegra->timings = kcalloc(child_count, sizeof(struct emc_timing), - GFP_KERNEL); + size = (tegra->num_timings + child_count) * sizeof(struct emc_timing); + + tegra->timings = krealloc(tegra->timings, size, GFP_KERNEL); if (!tegra->timings) return -ENOMEM; - tegra->num_timings = child_count; + timings_ptr = tegra->timings + tegra->num_timings; + tegra->num_timings += child_count; for_each_child_of_node(node, child) { - struct emc_timing *timing = tegra->timings + (i++); + struct emc_timing *timing = timings_ptr + (i++); err = load_one_timing_from_dt(tegra, timing, child); if (err) { @@ -456,7 +471,7 @@ static int load_timings_from_dt(struct tegra_clk_emc *tegra, timing->ram_code = ram_code; } - sort(tegra->timings, tegra->num_timings, sizeof(struct emc_timing), + sort(timings_ptr, child_count, sizeof(struct emc_timing), cmp_timings, NULL); return 0; @@ -499,10 +514,10 @@ struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np, * fuses until the apbmisc driver is loaded. */ err = load_timings_from_dt(tegra, node, node_ram_code); - of_node_put(node); - if (err) + if (err) { + of_node_put(node); return ERR_PTR(err); - break; + } } if (tegra->num_timings == 0) @@ -532,7 +547,5 @@ struct clk *tegra_clk_register_emc(void __iomem *base, struct device_node *np, /* Allow debugging tools to see the EMC clock */ clk_register_clkdev(clk, "emc", "tegra-clk-debug"); - clk_prepare_enable(clk); - return clk; }; diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index b50b7460014b..6b976b2514f7 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -444,6 +444,9 @@ static int clk_pll_enable(struct clk_hw *hw) unsigned long flags = 0; int ret; + if (clk_pll_is_enabled(hw)) + return 0; + if (pll->lock) spin_lock_irqsave(pll->lock, flags); @@ -663,8 +666,8 @@ static void _update_pll_mnp(struct tegra_clk_pll *pll, pll_override_writel(val, params->pmc_divp_reg, pll); val = pll_override_readl(params->pmc_divnm_reg, pll); - val &= ~(divm_mask(pll) << div_nmp->override_divm_shift) | - ~(divn_mask(pll) << div_nmp->override_divn_shift); + val &= ~((divm_mask(pll) << div_nmp->override_divm_shift) | + (divn_mask(pll) << div_nmp->override_divn_shift)); val |= (cfg->m << div_nmp->override_divm_shift) | (cfg->n << div_nmp->override_divn_shift); pll_override_writel(val, params->pmc_divnm_reg, pll); @@ -940,11 +943,16 @@ static int clk_plle_training(struct tegra_clk_pll *pll) static int clk_plle_enable(struct clk_hw *hw) { struct tegra_clk_pll *pll = to_clk_pll(hw); - unsigned long input_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); struct tegra_clk_pll_freq_table sel; + unsigned long input_rate; u32 val; int err; + if (clk_pll_is_enabled(hw)) + return 0; + + input_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); + if (_get_table_rate(hw, &sel, pll->params->fixed_rate, input_rate)) return -EINVAL; @@ -1355,6 +1363,9 @@ static int clk_pllc_enable(struct clk_hw *hw) int ret; unsigned long flags = 0; + if (clk_pll_is_enabled(hw)) + return 0; + if (pll->lock) spin_lock_irqsave(pll->lock, flags); @@ -1567,7 +1578,12 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw) u32 val; int ret; unsigned long flags = 0; - unsigned long input_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); + unsigned long input_rate; + + if (clk_pll_is_enabled(hw)) + return 0; + + input_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); if (_get_table_rate(hw, &sel, pll->params->fixed_rate, input_rate)) return -EINVAL; @@ -1704,6 +1720,9 @@ static int clk_pllu_tegra114_enable(struct clk_hw *hw) return -EINVAL; } + if (clk_pll_is_enabled(hw)) + return 0; + input_rate = clk_hw_get_rate(__clk_get_hw(osc)); if (pll->lock) @@ -2379,6 +2398,16 @@ struct clk *tegra_clk_register_pllre_tegra210(const char *name, return clk; } +static int clk_plle_tegra210_is_enabled(struct clk_hw *hw) +{ + struct tegra_clk_pll *pll = to_clk_pll(hw); + u32 val; + + val = pll_readl_base(pll); + + return val & PLLE_BASE_ENABLE ? 1 : 0; +} + static int clk_plle_tegra210_enable(struct clk_hw *hw) { struct tegra_clk_pll *pll = to_clk_pll(hw); @@ -2386,7 +2415,12 @@ static int clk_plle_tegra210_enable(struct clk_hw *hw) u32 val; int ret = 0; unsigned long flags = 0; - unsigned long input_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); + unsigned long input_rate; + + if (clk_plle_tegra210_is_enabled(hw)) + return 0; + + input_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); if (_get_table_rate(hw, &sel, pll->params->fixed_rate, input_rate)) return -EINVAL; @@ -2497,16 +2531,6 @@ out: spin_unlock_irqrestore(pll->lock, flags); } -static int clk_plle_tegra210_is_enabled(struct clk_hw *hw) -{ - struct tegra_clk_pll *pll = to_clk_pll(hw); - u32 val; - - val = pll_readl_base(pll); - - return val & PLLE_BASE_ENABLE ? 1 : 0; -} - static const struct clk_ops tegra_clk_plle_tegra210_ops = { .is_enabled = clk_plle_tegra210_is_enabled, .enable = clk_plle_tegra210_enable, diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index abc0c4bea740..d7bee144f4b7 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -413,7 +413,6 @@ static struct tegra_clk_pll_params pll_m_params = { .base_reg = PLLM_BASE, .misc_reg = PLLM_MISC, .lock_mask = PLL_BASE_LOCK, - .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, .lock_delay = 300, .max_p = 5, .pdiv_tohw = pllm_p, @@ -421,7 +420,7 @@ static struct tegra_clk_pll_params pll_m_params = { .pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE, .pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE_2, .freq_table = pll_m_freq_table, - .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, + .flags = TEGRA_PLL_USE_LOCK, }; static struct tegra_clk_pll_freq_table pll_e_freq_table[] = { diff --git a/include/dt-bindings/clock/stm32fx-clock.h b/include/dt-bindings/clock/stm32fx-clock.h index 58d8b515be55..7d34e297049c 100644 --- a/include/dt-bindings/clock/stm32fx-clock.h +++ b/include/dt-bindings/clock/stm32fx-clock.h @@ -54,7 +54,10 @@ #define CLK_I2C3 28 #define CLK_I2C4 29 #define CLK_LPTIMER 30 - -#define END_PRIMARY_CLK_F7 31 +#define CLK_PLL_SRC 31 +#define CLK_DFSDM1 32 +#define CLK_ADFSDM1 33 +#define CLK_F769_DSI 34 +#define END_PRIMARY_CLK_F7 35 #endif diff --git a/include/linux/clk/analogbits-wrpll-cln28hpc.h b/include/linux/clk/analogbits-wrpll-cln28hpc.h new file mode 100644 index 000000000000..03279097e138 --- /dev/null +++ b/include/linux/clk/analogbits-wrpll-cln28hpc.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018-2019 SiFive, Inc. + * Wesley Terpstra + * Paul Walmsley + */ + +#ifndef __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H +#define __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H + +#include + +/* DIVQ_VALUES: number of valid DIVQ values */ +#define DIVQ_VALUES 6 + +/* + * Bit definitions for struct wrpll_cfg.flags + * + * WRPLL_FLAGS_BYPASS_FLAG: if set, the PLL is either in bypass, or should be + * programmed to enter bypass + * WRPLL_FLAGS_RESET_FLAG: if set, the PLL is in reset + * WRPLL_FLAGS_INT_FEEDBACK_FLAG: if set, the PLL is configured for internal + * feedback mode + * WRPLL_FLAGS_EXT_FEEDBACK_FLAG: if set, the PLL is configured for external + * feedback mode (not yet supported by this driver) + */ +#define WRPLL_FLAGS_BYPASS_SHIFT 0 +#define WRPLL_FLAGS_BYPASS_MASK BIT(WRPLL_FLAGS_BYPASS_SHIFT) +#define WRPLL_FLAGS_RESET_SHIFT 1 +#define WRPLL_FLAGS_RESET_MASK BIT(WRPLL_FLAGS_RESET_SHIFT) +#define WRPLL_FLAGS_INT_FEEDBACK_SHIFT 2 +#define WRPLL_FLAGS_INT_FEEDBACK_MASK BIT(WRPLL_FLAGS_INT_FEEDBACK_SHIFT) +#define WRPLL_FLAGS_EXT_FEEDBACK_SHIFT 3 +#define WRPLL_FLAGS_EXT_FEEDBACK_MASK BIT(WRPLL_FLAGS_EXT_FEEDBACK_SHIFT) + +/** + * struct wrpll_cfg - WRPLL configuration values + * @divr: reference divider value (6 bits), as presented to the PLL signals + * @divf: feedback divider value (9 bits), as presented to the PLL signals + * @divq: output divider value (3 bits), as presented to the PLL signals + * @flags: PLL configuration flags. See above for more information + * @range: PLL loop filter range. See below for more information + * @output_rate_cache: cached output rates, swept across DIVQ + * @parent_rate: PLL refclk rate for which values are valid + * @max_r: maximum possible R divider value, given @parent_rate + * @init_r: initial R divider value to start the search from + * + * @divr, @divq, @divq, @range represent what the PLL expects to see + * on its input signals. Thus @divr and @divf are the actual divisors + * minus one. @divq is a power-of-two divider; for example, 1 = + * divide-by-2 and 6 = divide-by-64. 0 is an invalid @divq value. + * + * When initially passing a struct wrpll_cfg record, the + * record should be zero-initialized with the exception of the @flags + * field. The only flag bits that need to be set are either + * WRPLL_FLAGS_INT_FEEDBACK or WRPLL_FLAGS_EXT_FEEDBACK. + */ +struct wrpll_cfg { + u8 divr; + u8 divq; + u8 range; + u8 flags; + u16 divf; +/* private: */ + u32 output_rate_cache[DIVQ_VALUES]; + unsigned long parent_rate; + u8 max_r; + u8 init_r; +}; + +int wrpll_configure_for_rate(struct wrpll_cfg *c, u32 target_rate, + unsigned long parent_rate); + +unsigned int wrpll_calc_max_lock_us(const struct wrpll_cfg *c); + +unsigned long wrpll_calc_output_rate(const struct wrpll_cfg *c, + unsigned long parent_rate); + +#endif /* __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H */ diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h index 931ab05f771d..0c53f26ae3d3 100644 --- a/include/linux/clk/at91_pmc.h +++ b/include/linux/clk/at91_pmc.h @@ -74,6 +74,8 @@ #define AT91_PMC_USBDIV_4 (2 << 28) #define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ +#define AT91_PMC_CPU_CKR 0x28 /* CPU Clock Register */ + #define AT91_PMC_MCKR 0x30 /* Master Clock Register */ #define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ #define AT91_PMC_CSS_SLOW (0 << 0) @@ -187,16 +189,8 @@ #define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */ #define AT91_PMC_PCR_PID_MASK 0x3f -#define AT91_PMC_PCR_GCKCSS_OFFSET 8 -#define AT91_PMC_PCR_GCKCSS_MASK (0x7 << AT91_PMC_PCR_GCKCSS_OFFSET) -#define AT91_PMC_PCR_GCKCSS(n) ((n) << AT91_PMC_PCR_GCKCSS_OFFSET) /* GCK Clock Source Selection */ #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ -#define AT91_PMC_PCR_DIV_OFFSET 16 -#define AT91_PMC_PCR_DIV_MASK (0x3 << AT91_PMC_PCR_DIV_OFFSET) -#define AT91_PMC_PCR_DIV(n) ((n) << AT91_PMC_PCR_DIV_OFFSET) /* Divisor Value */ -#define AT91_PMC_PCR_GCKDIV_OFFSET 20 -#define AT91_PMC_PCR_GCKDIV_MASK (0xff << AT91_PMC_PCR_GCKDIV_OFFSET) -#define AT91_PMC_PCR_GCKDIV(n) ((n) << AT91_PMC_PCR_GCKDIV_OFFSET) /* Generated Clock Divisor Value */ +#define AT91_PMC_PCR_GCKDIV_MASK GENMASK(27, 20) #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #define AT91_PMC_PCR_GCKEN (0x1 << 29) /* GCK Enable */