Intel Software Developer's Manual, volume 3, chapter 9.11.6 says:
"Note that the microcode update must be aligned on a 16-byte boundary
and the size of the microcode update must be 1-KByte granular"
When early-load Intel microcode is loaded from initramfs, userspace tool
'iucode_tool' has already 16-byte aligned those microcode bits in that
initramfs image. Image that was created something like this:
iucode_tool --write-earlyfw=FOO.cpio microcode-files...
However, when early-load Intel microcode is loaded from built-in
firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that
16-byte alignment is not guaranteed.
Fix this by forcing all built-in firmware BLOBs to 16-byte alignment.
[ If we end up having other firmware with much bigger alignment
requirements, we might need to introduce some method for the firmware
to specify it, this is the minimal "just increase the alignment a bit
to account for this one special case" patch - Linus ]
Signed-off-by: Jari Ruusu <jari.ruusu@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski:
"This small series replaces all in-kernel calls to the
userspace-focused ksys_mount() and ksys_dup() with calls to
kernel-centric functions:
For each replacement of ksys_mount() with do_mount(), one needs to
verify that the first and third parameter (char *dev_name, char *type)
are strings allocated in kernelspace and that the fifth parameter
(void *data) is either NULL or refers to a full page (only occurence
in init/do_mounts.c::do_mount_root()). The second and fourth
parameters (char *dir_name, unsigned long flags) are passed by
ksys_mount() to do_mount() unchanged, and therefore do not require
particular care.
Moreover, instead of pretending to be userspace, the opening of
/dev/console as stdin/stdout/stderr can be implemented using in-kernel
functions as well. Thereby, ksys_dup() can be removed for good"
[ This doesn't get rid of the special "kernel init runs with KERNEL_DS"
case, but it at least removes _some_ of the users of "treat kernel
pointers as user pointers for our magical init sequence".
One day we'll hopefully be rid of it all, and can initialize our
init_thread addr_limit to USER_DS. - Linus ]
* 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
fs: remove ksys_dup()
init: unify opening /dev/console as stdin/stdout/stderr
init: use do_mount() instead of ksys_mount()
initrd: use do_mount() instead of ksys_mount()
devtmpfs: use do_mount() instead of ksys_mount()
In devtmpfs, do_mount() can be called directly instead of complex wrapping
by ksys_mount():
- the first and third arguments are const strings in the kernel,
and do not need to be copied over from userspace;
- the fifth argument is NULL, and therefore no page needs to be
copied over from userspace;
- the second and fourth argument are passed through anyway.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
SuperH images crash too eearly to display any console output. Bisect
points to commit 507fd01d53 ("drivers: move the early platform device
support to arch/sh"). An analysis of that patch suggests that
early_platform_cleanup() is now called at the wrong time. Restoring its
call point fixes the problem.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Fixes: 507fd01d53 ("drivers: move the early platform device support to arch/sh")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Landley <rob@landley.net>
Link: https://lore.kernel.org/r/20191203205852.15659-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl3pORkPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3FK0P/0EG4lK+il7nE3pd9yIGUjlcYuumIjoxvyC9
9ef202POJLIO3yMlsNyGFR+aOknFO/GtGvDkDFhTtlsGCL40tVzVsyo7ZQo+8mXD
abr+H74NmRXImc+SISYR8X1CD6vEi3oi/no1y5dRzknlBikfsdSLKXJSMYBJ2A6t
DNLwu0h1IZhPk7XQQsxaElG/a9HN8eueMdP20J1IlhOh0GiOwm+rbsLSZNbA/W9m
53XhFs3Ag39SDE0BfXsS+XOWTE7FheZsZk2XQrOwYm9PnxjpIWH7FE2sYsk6uUIc
Pa1b6wB5zlRnxvVHP0m3GXhbTUJDYDK3oybHffI4Mzd0cyZQHC92LhUXFrlTxkaf
6kyhJOTdd5KMlZ2LS7jkwLqb30ieXBPKAREjdbRt6hpvu5P6G+bZQphTEeNAZC61
XnX8mQ/XeoHdoGY5MvS8ht6a1qDF29ebA0/02seicThGK6tS9Qsju6Zo0sg9H1NH
weK6jDuzLq5jpv/LB1apigrDSx+zddRzrwkwy85hR5aWOQhG0xjOoFBProbTS0to
wR46zCEkbGZv4uc0gRuIdp0NR/lguqgDWPeoLluoTqmcpKS6N3RyxD0bWzlvgDFA
fpYxVNKavHneWjfZ7U5RbYXD6jycJcuLaCOs16nrtUbMgJ9pqclLIaZXn7ZTRIuT
RW6NgfZV
=dk7w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
Merge more updates from Andrew Morton:
"Most of the rest of MM and various other things. Some Kconfig rework
still awaits merges of dependent trees from linux-next.
Subsystems affected by this patch series: mm/hotfixes, mm/memcg,
mm/vmstat, mm/thp, procfs, sysctl, misc, notifiers, core-kernel,
bitops, lib, checkpatch, epoll, binfmt, init, rapidio, uaccess, kcov,
ubsan, ipc, bitmap, mm/pagemap"
* akpm: (86 commits)
mm: remove __ARCH_HAS_4LEVEL_HACK and include/asm-generic/4level-fixup.h
um: add support for folded p4d page tables
um: remove unused pxx_offset_proc() and addr_pte() functions
sparc32: use pgtable-nopud instead of 4level-fixup
parisc/hugetlb: use pgtable-nopXd instead of 4level-fixup
parisc: use pgtable-nopXd instead of 4level-fixup
nds32: use pgtable-nopmd instead of 4level-fixup
microblaze: use pgtable-nopmd instead of 4level-fixup
m68k: mm: use pgtable-nopXd instead of 4level-fixup
m68k: nommu: use pgtable-nopud instead of 4level-fixup
c6x: use pgtable-nopud instead of 4level-fixup
arm: nommu: use pgtable-nopud instead of 4level-fixup
alpha: use pgtable-nopud instead of 4level-fixup
gpio: pca953x: tighten up indentation
gpio: pca953x: convert to use bitmap API
gpio: pca953x: use input from regs structure in pca953x_irq_pending()
gpio: pca953x: remove redundant variable and check in IRQ handler
lib/bitmap: introduce bitmap_replace() helper
lib/test_bitmap: fix comment about this file
lib/test_bitmap: move exp1 and exp2 upper for others to use
...
Statistics in vmstat is combined from counters with different structure,
but names for them are merged into one array.
This patch adds trivial helpers to get name for each item:
const char *zone_stat_name(enum zone_stat_item item);
const char *numa_stat_name(enum numa_stat_item item);
const char *node_stat_name(enum node_stat_item item);
const char *writeback_stat_name(enum writeback_stat_item item);
const char *vm_event_name(enum vm_event_item item);
Names for enum writeback_stat_item are folded in the middle of
vmstat_text so this patch moves declaration into header to calculate
offset of following items.
Also this patch reuses piece of node stat names for lru list names:
const char *lru_list_name(enum lru_list lru);
This returns common lru list names: "inactive_anon", "active_anon",
"inactive_file", "active_file", "unevictable".
[khlebnikov@yandex-team.ru: do not use size of vmstat_text as count of /proc/vmstat items]
Link: http://lkml.kernel.org/r/157152151769.4139.15423465513138349343.stgit@buzz
Link: https://lore.kernel.org/linux-mm/cd1c42ae-281f-c8a8-70ac-1d01d417b2e1@infradead.org/T/#u
Link: http://lkml.kernel.org/r/157113012325.453.562783073839432766.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Avoid a race condition in the ACPI EC driver that may cause
systems to be unable to leave suspend-to-idle (Rafael Wysocki).
- Drop the "disabled" field, which is redundant, from struct
cpuidle_state (Rafael Wysocki).
- Reintroduce device PM QoS frequency constraints (temporarily
introduced and than dropped during the 5.4 cycle) in preparation
for adding QoS support to devfreq (Leonard Crestez).
- Clean up indentation (in multiple places) and the cpuidle drivers
help text in Kconfig (Krzysztof Kozlowski, Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=KAyd
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull additional power management updates from Rafael Wysocki:
"These fix an ACPI EC driver bug exposed by the recent rework of the
suspend-to-idle code flow, reintroduce frequency constraints into
device PM QoS (in preparation for adding QoS support to devfreq), drop
a redundant field from struct cpuidle_state and clean up Kconfig in
some places.
Specifics:
- Avoid a race condition in the ACPI EC driver that may cause systems
to be unable to leave suspend-to-idle (Rafael Wysocki)
- Drop the "disabled" field, which is redundant, from struct
cpuidle_state (Rafael Wysocki)
- Reintroduce device PM QoS frequency constraints (temporarily
introduced and than dropped during the 5.4 cycle) in preparation
for adding QoS support to devfreq (Leonard Crestez)
- Clean up indentation (in multiple places) and the cpuidle drivers
help text in Kconfig (Krzysztof Kozlowski, Randy Dunlap)"
* tag 'pm-5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Rework ACPI events synchronization
ACPI: EC: Rework flushing of pending work
PM / devfreq: Add missing locking while setting suspend_freq
PM / QoS: Restore DEV_PM_QOS_MIN/MAX_FREQUENCY
PM / QoS: Reorder pm_qos/freq_qos/dev_pm_qos structs
PM / QoS: Initial kunit test
PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX
power: avs: Fix Kconfig indentation
cpufreq: Fix Kconfig indentation
cpuidle: minor Kconfig help text fixes
cpuidle: Drop disabled field from struct cpuidle_state
cpuidle: Fix Kconfig indentation
The mem_sysfs_mutex isn't really helpful. Also, it's not really clear
what the mutex protects at all.
The device lists of the memory subsystem are protected separately. We
don't need that mutex when looking up. creating, or removing
independent devices. find_memory_block_by_id() will perform locking on
its own and grab a reference of the returned device.
At the time memory_dev_init() is called, we cannot have concurrent
hot(un)plug operations yet - we're still fairly early during boot. We
don't need any locking.
The creation/removal of memory block devices should be protected on a
higher level - especially using the device hotplug lock to avoid
documented issues (see Documentation/core-api/memory-hotplug.rst) - or
if that is reworked, using similar locking.
Protecting in the context of these functions only doesn't really make
sense. Especially, if we would have a situation where the same memory
blocks are created/deleted at the same time, there is something horribly
going wrong (imagining adding/removing a DIMM at the same time from two
call paths) - after the functions succeeded something else in the
callers would blow up (e.g., create_memory_block_devices() succeeded but
there are no memory block devices anymore).
All relevant call paths (except when adding memory early during boot via
ACPI, which is now documented) hold the device hotplug lock when adding
memory, and when removing memory. Let's document that instead.
Add a simple safety net to create_memory_block_devices() in case we
would actually remove memory blocks while adding them, so we'll never
dereference a NULL pointer. Simplify memory_dev_init() now that the
lock is gone.
Link: http://lkml.kernel.org/r/20190925082621.4927-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently soft_offline_page() receives struct page, and its sibling
memory_failure() receives pfn. This discrepancy looks weird and makes
precheck on pfn validity tricky. So let's align them.
Link: http://lkml.kernel.org/r/20191016234706.GA5493@www9186uo.sakura.ne.jp
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support for adding per-device frequency limits was removed in
commit 2aac8bdf7a ("PM: QoS: Drop frequency QoS types from device PM QoS")
after cpufreq switched to use a new "freq_constraints" construct.
Restore support for per-device freq limits but base this upon
freq_constraints. This is primarily meant to be used by the devfreq
subsystem.
This removes the "static" marking on freq_qos_apply but does not export
it for modules.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pm_qos family of APIs are used in relatively difficult to reproduce
scenarios such as thermal throttling so they benefit from unit testing.
Start by adding basic tests from the the freq_qos APIs. It includes
tests for issues that were brought up on mailing lists:
https://patchwork.kernel.org/patch/11252425/#23017005https://patchwork.kernel.org/patch/11253421/
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of the
patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs apis
so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over time,
it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules and
have it "just work" for a variety of platforms (like a distro kernel)
The big problem turned out to be a lack of depandancy information
between different areas of DT entries, and the work here resolves that
problem and now allows devices to boot properly, and quicker than a
monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6m6Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yntJQCcCqg6RQ7LTdHuZv1ETeefXlsfk00An1Jtean6
42bWGx52bGFvAcpjWy8R
=P7hq
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of
the patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs
apis so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over
time, it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules
and have it "just work" for a variety of platforms (like a distro
kernel). The big problem turned out to be a lack of dependency
information between different areas of DT entries, and the work here
resolves that problem and now allows devices to boot properly, and
quicker than a monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
tracing: Remove unnecessary DEBUG_FS dependency
of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
debugfs: Fix !DEBUG_FS debugfs_create_automount
of: property: Add device link support for "iommu-map"
of: property: Fix the semantics of of_is_ancestor_of()
i2c: of: Populate fwnode in of_i2c_get_board_info()
drivers: base: Fix Kconfig indentation
firmware_loader: Fix labels with comma for builtin firmware
driver core: Allow device link operations inside sync_state()
driver core: platform: Declare ret variable only once
cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
crypto: hisilicon: no need to check return value of debugfs_create functions
driver core: platform: use the correct callback type for bus_find_device
firmware_class: make firmware caching configurable
driver core: Clarify documentation for fwnode_operations.add_links()
mailbox: tegra: Fix superfluous IRQ error message
net: caif: Fix debugfs on 64-bit platforms
mac80211: Use debugfs_create_xul() helper
media: c8sectpfe: no need to check return value of debugfs_create functions
of: property: Add device link support for iommus, mboxes and io-channels
...
Add support for printing fwnode names using a new conversion
specifier "%pfw" (Sakari Ailus), clean up the software node and
efi/apple-properties code in preparation for improved software node
reference properties handling (Dmitry Torokhov) and fix the struct
fwnode_operations description (Heikki Krogerus).
-----BEGIN PGP SIGNATURE-----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=VcCH
-----END PGP SIGNATURE-----
Merge tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"Add support for printing fwnode names using a new conversion specifier
"%pfw" (Sakari Ailus), clean up the software node and
efi/apple-properties code in preparation for improved software node
reference properties handling (Dmitry Torokhov) and fix the struct
fwnode_operations description (Heikki Krogerus)"
* tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
software node: simplify property_entry_read_string_array()
software node: unify PROPERTY_ENTRY_XXX macros
software node: remove property_entry_read_uNN_array functions
software node: get rid of property_set_pointer()
software node: clean up property_copy_string_array()
software node: mark internal macros with double underscores
efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN
software node: introduce PROPERTY_ENTRY_XXX_ARRAY_LEN()
software node: remove DEV_PROP_MAX
device property: Fix the description of struct fwnode_operations
lib/test_printf: Add tests for %pfw printk modifier
lib/vsprintf: Add %pfw conversion specifier for printing fwnode names
lib/vsprintf: OF nodes are first and foremost, struct device_nodes
lib/vsprintf: Make use of fwnode API to obtain node names and separators
lib/vsprintf: Add a note on re-using %pf or %pF
lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps
device property: Add a function to obtain a node's prefix
device property: Add fwnode_get_name for returning the name of a node
device property: Add functions for accessing node's parents
device property: Move fwnode_get_parent() up
...
- Use nanoseconds (instead of microseconds) as the unit of time in
the cpuidle core and simplify checks for disabled idle states in
the idle loop (Rafael Wysocki).
- Fix and clean up the teo cpuidle governor (Rafael Wysocki).
- Fix the cpuidle registration error code path (Zhenzhong Duan).
- Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei).
- Extend the idle injection infrastructure to be able to measure the
requested duration in nanoseconds and to allow an exit latency
limit for idle states to be specified (Daniel Lezcano).
- Fix cpufreq driver registration and clarify a comment in the
cpufreq core (Viresh Kumar).
- Add NULL checks to the show() and store() methods of sysfs
attributes exposed by cpufreq (Kai Shen).
- Update cpufreq drivers:
* Fix for a plain int as pointer warning from sparse in
intel_pstate (Jamal Shareef).
* Fix for a hardcoded number of CPUs and stack bloat in the
powernv driver (John Hubbard).
* Updates to the ti-cpufreq driver and DT files to support new
platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
H. Nikolaus Schaller).
* Merging of the arm_big_little and vexpress-spc drivers and
related cleanup (Sudeep Holla).
* Fix for imx's default speed grade value (Anson Huang).
* Minor cleanup of the s3c64xx driver (Nathan Chancellor).
* CPU speed bin detection fix for sun50i (Ondrej Jirman).
- Appoint Chanwoo Choi as the new devfreq maintainer.
- Update the devfreq core:
* Check NULL governor in available_governors_show sysfs to prevent
showing wrong governor information and fix a race condition
between devfreq_update_status() and trans_stat_show() (Leonard
Crestez).
* Add new 'interrupt-driven' flag for devfreq governors to allow
interrupt-driven governors to prevent the devfreq core from
polling devices for status (Dmitry Osipenko).
* Improve an error message in devfreq_add_device() (Matthias
Kaehlcke).
- Update devfreq drivers:
* tegra30 driver fixes and cleanups (Dmitry Osipenko).
* Removal of unused property from dt-binding documentation for
the exynos-bus driver (Kamil Konieczny).
* exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
Szyprowski).
- Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
power capping driver (Zhang Rui).
- Allow device initialization in the generic power domains (genpd)
framework to be more straightforward and clean it up (Ulf Hansson).
- Add support for adjusting OPP voltages at run time to the OPP
framework (Stephen Boyd).
- Avoid freeing memory that has never been allocated in the
hibernation core (Andy Whitcroft).
- Clean up function headers in a header file and coding style in the
wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan).
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
ARM (Ben Dooks, Geert Uytterhoeven).
- Wrap power management documentation to fit in 80 columns (Bjorn
Helgaas).
- Add pm-graph utility entry to MAINTAINERS (Todd Brandt).
- Update the cpupower utility:
* Fix the handling of set and info subcommands (Abhishek Goel).
* Fix build warnings (Nathan Chancellor).
* Improve mperf_monitor handling (Janakarajan Natarajan).
-----BEGIN PGP SIGNATURE-----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=GJvT
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include cpuidle changes to use nanoseconds (instead of
microseconds) as the unit of time and to simplify checks for disabled
idle states in the idle loop, some cpuidle fixes and governor updates,
assorted cpufreq updates (driver updates mostly and a few core fixes
and cleanups), devfreq updates (dominated by the tegra30 driver
changes), new CPU IDs for the RAPL power capping driver, relatively
minor updates of the generic power domains (genpd) and operation
performance points (OPP) frameworks, and assorted fixes and cleanups.
There are also two maintainer information updates: Chanwoo Choi will
be maintaining the devfreq subsystem going forward and Todd Brandt is
going to maintain the pm-graph utility (created by him).
Specifics:
- Use nanoseconds (instead of microseconds) as the unit of time in
the cpuidle core and simplify checks for disabled idle states in
the idle loop (Rafael Wysocki)
- Fix and clean up the teo cpuidle governor (Rafael Wysocki)
- Fix the cpuidle registration error code path (Zhenzhong Duan)
- Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei)
- Extend the idle injection infrastructure to be able to measure the
requested duration in nanoseconds and to allow an exit latency
limit for idle states to be specified (Daniel Lezcano)
- Fix cpufreq driver registration and clarify a comment in the
cpufreq core (Viresh Kumar)
- Add NULL checks to the show() and store() methods of sysfs
attributes exposed by cpufreq (Kai Shen)
- Update cpufreq drivers:
* Fix for a plain int as pointer warning from sparse in
intel_pstate (Jamal Shareef)
* Fix for a hardcoded number of CPUs and stack bloat in the
powernv driver (John Hubbard)
* Updates to the ti-cpufreq driver and DT files to support new
platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
H. Nikolaus Schaller)
* Merging of the arm_big_little and vexpress-spc drivers and
related cleanup (Sudeep Holla)
* Fix for imx's default speed grade value (Anson Huang)
* Minor cleanup of the s3c64xx driver (Nathan Chancellor)
* CPU speed bin detection fix for sun50i (Ondrej Jirman)
- Appoint Chanwoo Choi as the new devfreq maintainer.
- Update the devfreq core:
* Check NULL governor in available_governors_show sysfs to prevent
showing wrong governor information and fix a race condition
between devfreq_update_status() and trans_stat_show() (Leonard
Crestez)
* Add new 'interrupt-driven' flag for devfreq governors to allow
interrupt-driven governors to prevent the devfreq core from
polling devices for status (Dmitry Osipenko)
* Improve an error message in devfreq_add_device() (Matthias
Kaehlcke)
- Update devfreq drivers:
* tegra30 driver fixes and cleanups (Dmitry Osipenko)
* Removal of unused property from dt-binding documentation for the
exynos-bus driver (Kamil Konieczny)
* exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
Szyprowski)
- Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
power capping driver (Zhang Rui)
- Allow device initialization in the generic power domains (genpd)
framework to be more straightforward and clean it up (Ulf Hansson)
- Add support for adjusting OPP voltages at run time to the OPP
framework (Stephen Boyd)
- Avoid freeing memory that has never been allocated in the
hibernation core (Andy Whitcroft)
- Clean up function headers in a header file and coding style in the
wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan)
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
ARM (Ben Dooks, Geert Uytterhoeven)
- Wrap power management documentation to fit in 80 columns (Bjorn
Helgaas)
- Add pm-graph utility entry to MAINTAINERS (Todd Brandt)
- Update the cpupower utility:
* Fix the handling of set and info subcommands (Abhishek Goel)
* Fix build warnings (Nathan Chancellor)
* Improve mperf_monitor handling (Janakarajan Natarajan)"
* tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
PM: Wrap documentation to fit in 80 columns
cpuidle: Pass exit latency limit to cpuidle_use_deepest_state()
cpuidle: Allow idle injection to apply exit latency limit
cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks
cpuidle: teo: Avoid code duplication in conditionals
cpufreq: Register drivers only after CPU devices have been registered
cpuidle: teo: Avoid using "early hits" incorrectly
cpuidle: teo: Exclude cpuidle overhead from computations
PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
PM / Domains: Implement the ->start() callback for genpd
PM / Domains: Introduce dev_pm_domain_start()
ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition
PM / wakeirq: remove unnecessary parentheses
power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call
cpuidle: Use nanoseconds as the unit of time
PM / OPP: Support adjusting OPP voltages at runtime
PM / core: Clean up some function headers in power.h
cpufreq: Add NULL checks to show() and store() methods of cpufreq
cpufreq: intel_pstate: Fix plain int as pointer warning from sparse
...
* pm-sleep:
PM / wakeirq: remove unnecessary parentheses
PM / core: Clean up some function headers in power.h
PM / hibernate: memory_bm_find_bit(): Tighten node optimisation
* pm-domains:
PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
PM / Domains: Implement the ->start() callback for genpd
PM / Domains: Introduce dev_pm_domain_start()
* pm-opp:
PM / OPP: Support adjusting OPP voltages at runtime
* powercap:
powercap/intel_rapl: add support for Cometlake desktop
powercap/intel_rapl: add support for CometLake Mobile
Just one patch for this release removing some dead code.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3b0A4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0EOCB/9e8ilN017+uszddWfnvM24qVzdhzy6
OLk5dCPMSTL+mjachecO/07nL7s2sk2p38N2cxNLnzbuwBpbnTX8tfSy+EfP+359
/xgtZ4Rlmv6jk+SU4Lro+d3ZnIrjangRIxzKYjC5OqNOXbdz9gsVqNZOLupqI5V7
JEUmIQmfvyCP/wYmzKcrfKnXkSKMUlAamhe5Wv2ttqTc1xKiXFJNhAA+tIJcJdQP
P0zRv3sIjrhuIoxKLg6GaH1THdFwFrHVqysBQ+LgAcef4pXezLEFabOe4BPLFnXp
Tnuv4/V2Xb0lhu56IIGFq461kxWAaZLDw1Y5fUZM6QqCr40ecNo3G8Ng
=r/ud
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"Just one patch for this release removing some dead code"
* tag 'regmap-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: regmap-w1: Drop unreachable code
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20191120134256.16186-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some firmware images contain a comma, such as:
EXTRA_FIRMWARE "brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt"
as Broadcom firmware simply tags the device tree compatible
string at the end of the firmware parameter file. And the
compatible string contains a comma.
This doesn't play well with gas:
drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S: Assembler messages:
drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S:4: Error: bad instruction `_fw_brcm_brcmfmac4334_sdio_samsung,gt_s7710_txt_bin:'
drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S:9: Error: bad instruction `_fw_brcm_brcmfmac4334_sdio_samsung,gt_s7710_txt_name:'
drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S:15: Error: can't resolve `.rodata' {.rodata section} - `_fw_brcm_brcmfmac4334_sdio_samsung' {*UND* section}
make[6]: *** [../scripts/Makefile.build:357: drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.o] Error 1
We need to get rid of the comma from the labels used by the
assembly stub generator.
Replacing a comma using GNU Make subst requires a helper
variable.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191115225911.3260-1-linus.walleij@linaro.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
try_offline_node() is pretty much broken right now:
- The node span is updated when onlining memory, not when adding it. We
ignore memory that was mever onlined. Bad.
- We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily
trigger a kernel panic. Bad for memory that is offline but also bad
for subsection hotadd with ZONE_DEVICE, whereby the memmap of the
first PFN of a section might contain garbage.
- Sections belonging to mixed nodes are not properly considered.
As memory blocks might belong to multiple nodes, we would have to walk
all pageblocks (or at least subsections) within present sections.
However, we don't have a way to identify whether a memmap that is not
online was initialized (relevant for ZONE_DEVICE). This makes things
more complicated.
Luckily, we can piggy pack on the node span and the nid stored in memory
blocks. Currently, the node span is grown when calling
move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when
removing memory, before calling try_offline_node(). Sysfs links are
created via link_mem_sections(), e.g., during boot or when adding
memory.
If the node still spans memory or if any memory block belongs to the
nid, we don't set the node offline. As memory blocks that span multiple
nodes cannot get offlined, the nid stored in memory blocks is reliable
enough (for such online memory blocks, the node still spans the memory).
Introduce for_each_memory_block() to efficiently walk all memory blocks.
Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span
when removing ZONE_DEVICE memory to fix similar issues (access of
garbage memmaps) - until we have a reliable way to identify whether
these memmaps were properly initialized. This implies later, that once
a node had ZONE_DEVICE memory, we won't be able to set a node offline -
which should be acceptable.
Since commit f1dd2cd13c ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") memory that is added is not
assoziated with a zone/node (memmap not initialized). The introducing
commit 60a5a19e74 ("memory-hotplug: remove sysfs file of node")
already missed that we could have multiple nodes for a section and that
the zone/node span is updated when onlining pages, not when adding them.
I tested this by hotplugging two DIMMs to a memory-less and cpu-less
NUMA node. The node is properly onlined when adding the DIMMs. When
removing the DIMMs, the node is properly offlined.
Masayoshi Mizuma reported:
: Without this patch, memory hotplug fails as panic:
:
: BUG: kernel NULL pointer dereference, address: 0000000000000000
: ...
: Call Trace:
: remove_memory_block_devices+0x81/0xc0
: try_remove_memory+0xb4/0x130
: __remove_memory+0xa/0x20
: acpi_memory_device_remove+0x84/0x100
: acpi_bus_trim+0x57/0x90
: acpi_bus_trim+0x2e/0x90
: acpi_device_hotplug+0x2b2/0x4d0
: acpi_hotplug_work_fn+0x1a/0x30
: process_one_work+0x171/0x380
: worker_thread+0x49/0x3f0
: kthread+0xf8/0x130
: ret_from_fork+0x35/0x40
[david@redhat.com: v3]
Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com
Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com
Fixes: 60a5a19e74 ("memory-hotplug: remove sysfs file of node")
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e86b
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some sync_state() implementations might need to call APIs that in turn
make calls to device link APIs. So, do the sync_state() callbacks
without holding the device link lock.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20191114225646.251277-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We may define ret variable only once and avoid adding it each time
platform_get_irq_optional() get extended.
For the sake of consistency do the same in __platform_get_irq_byname().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20191023122505.64684-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform_find_device_by_driver calls bus_find_device and passes
platform_match as the callback function. Casting the function to a
mismatching type trips indirect call Control-Flow Integrity (CFI) checking.
This change adds a callback function with the correct type and instead
of casting the function, explicitly casts the second parameter to struct
device_driver* as expected by platform_match.
Fixes: 36f3313d6b ("platform: Add platform_find_device_by_driver() helper")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191112214156.3430-1-samitolvanen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because firmware caching generates uevent messages that are sent over
a netlink socket, it can prevent suspend on many platforms. It's
also not always useful, so make it a configurable option.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: kernel-team@android.com
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20191113225429.118495-1-salyzyn@android.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The intent with walking the gpd_list via calling genpd_present() from
genpd_syscore_switch(), is to make sure the dev->pm_domain pointer belongs
to a registered genpd. However, as a genpd can't be removed if there is a
device attached to it, let's convert to use the quicker dev_to_genpd_safe()
instead.
Due to the above change, this allows us to clean up genpd_present() and
move it inside CONFIG_PM_GENERIC_DOMAINS_OF, so let's do that as well.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To allow a subsystem/driver to explicitly start its device from genpd's
point view, let's implement the ->start() callback in the struct
dev_pm_domain that corresponds to the genpd.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For a subsystem/driver that either doesn't support runtime PM or makes use
of pm_runtime_set_active() during ->probe(), may try to access its device
when probing, even if it may not be fully powered on from the PM domain's
point of view. This may be the case when the used PM domain is a genpd
provider, that implements genpd's ->start|stop() device callbacks.
There are cases where the subsystem/driver managed to avoid the above
problem, simply by calling pm_runtime_enable() and pm_runtime_get_sync()
during ->probe(). However, this approach comes with a drawback, especially
if the subsystem/driver implements a ->runtime_resume() callback.
More precisely, the subsystem/driver then needs to use a device flag, which
is checked in its ->runtime_resume() callback, as to avoid powering on its
resources the first time the callback is invoked. This is needed because
the subsystem/driver has already powered on the resources for the device,
during ->probe() and before it called pm_runtime_get_sync().
In a way to avoid this boilerplate code and the inefficient check for "if
(first_time_suspend)" in the ->runtime_resume() callback for these
subsystems/drivers, let's introduce and export a dev_pm_domain_start()
function, that may be called during ->probe() instead.
Moreover, let the dev_pm_domain_start() invoke an optional ->start()
callback, added to the struct dev_pm_domain, as to allow a PM domain
specific implementation.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove unnecessary parentheses found by code review.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The power.h is a bit messy due to the various existing CONFIG_PM* Kconfig
combinations. However the final section for wakeup_source_sysfs*() can be
moved inside one of the existing sections rather than adding yet another
one, so let's do that to clean up the code a little bit.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need to treat string arrays and single strings separately, we can go
exclusively by the element length in relation to data type size.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is absolutely no reason to have them as we can handle it all nicely in
property_entry_read_int_array().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of explicitly setting values of integer types when copying
property entries lets just copy entire value union when processing
non-array values.
For value arrays we no longer use union of pointers, but rather a single
void pointer, which allows us to remove property_set_pointer().
In property_get_pointer() we do not need to handle each data type
separately, we can simply return either the pointer or pointer to values
union.
We are not losing anything from removing typed pointer union because the
upper layers do their accesses through void pointers anyway, and we
trust the "type" of the property when interpret the data. We rely on
users of property entries on using PROPERTY_ENTRY_XXX() macros to
properly initialize entries instead of poking in the instances directly.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because property_copy_string_array() stores the newly allocated pointer in the
destination property, we have an awkward code in property_entry_copy_data()
where we fetch the new pointer from dst.
Let's change property_copy_string_array() to return pointer and rely on the
common path in property_entry_copy_data() to store it in destination structure.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Provide a variant of devm_platform_ioremap_resource() that allows to
lookup resources from platform devices by name rather than by index.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191022084318.22256-7-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some processors may incur a machine check error possibly resulting in an
unrecoverable CPU lockup when an instruction fetch encounters a TLB
multi-hit in the instruction TLB. This can occur when the page size is
changed along with either the physical address or cache type. The relevant
erratum can be found here:
https://bugzilla.kernel.org/show_bug.cgi?id=205195
There are other processors affected for which the erratum does not fully
disclose the impact.
This issue affects both bare-metal x86 page tables and EPT.
It can be mitigated by either eliminating the use of large pages or by
using careful TLB invalidations when changing the page size in the page
tables.
Just like Spectre, Meltdown, L1TF and MDS, a new bit has been allocated in
MSR_IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) and will be set on CPUs which
are mitigated against this issue.
Signed-off-by: Vineela Tummalapalli <vineela.tummalapalli@intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This is useful for users who are trying to identify the firmwares in use
on their system.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Link: https://lore.kernel.org/r/20191103180646.34880-1-sir@cmpwn.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When add_links() still has suppliers that it needs to link to in the
future, this patch allows it to differentiate between suppliers that are
needed for probing vs suppliers that are needed for sync_state()
correctness.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20191028220027.251605-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before this change, if a device is waiting on suppliers, it's assumed
that all those suppliers are needed for the device to probe
successfully. This change allows marking a devices as waiting only on
optional suppliers. This allows a device to wait on suppliers (and link
to them as soon as they are available) without preventing the device
from being probed.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20191028220027.251605-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parent devices might need to create "proxy" device links from themselves
to supplier devices to make sure the supplier devices don't get a
sync_state() before the child consumer devices get a chance to add
device links to the supplier devices.
However, the parent device has no real dependency on the supplier device
and probing, suspend/resume or runtime PM don't need to be affected by
the supplier device. To capture these cases, create a SYNC_STATE_ONLY
device link flag that only affects sync_state() behavior and doesn't
affect probing, suspend/resume or runtime PM.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20191028220027.251605-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some user might want to go through all registered wakeup sources
and doing things accordingly. For example, SoC PM driver might need to
do HW programming to prevent powering down specific IP which wakeup
source depending on. So add this API to help walk through all registered
wakeup source objects on that list and return them one by one.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Add the sysfs reporting file for TSX Async Abort. It exposes the
vulnerability and the mitigation state similar to the existing files for
the other hardware vulnerabilities.
Sysfs file path is:
/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
There are no more active users of DEV_PM_QOS_MIN_FREQUENCY and
DEV_PM_QOS_MAX_FREQUENCY device PM QoS request types, so drop them
along with the code supporting them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Uninitialized memmaps contain garbage and in the worst case trigger kernel
BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched.
Right now, when trying to soft-offline a PFN that resides on a memory
block that was never onlined, one gets a misleading error with
CONFIG_PAGE_POISONING:
:/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page
[ 23.097167] soft offline: 0x150000 page already poisoned
But the actual result depends on the garbage in the memmap.
soft_offline_page() can only work with online pages, it returns -EIO in
case of ZONE_DEVICE. Make sure to only forward pages that are online
(iow, managed by the buddy) and, therefore, have an initialized memmap.
Add a check against pfn_to_online_page() and similarly return -EIO.
Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b]
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm-cpufreq:
ACPI: processor: Avoid NULL pointer dereferences at init time
cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown
* pm-sleep:
PM: sleep: include <linux/pm_runtime.h> for pm_wq
ACPI: PM: Drop Dell XPS13 9360 from LPS0 Idle _DSM blacklist
The prefix is used for printing purpose before a node, and it also works
as a separator between two nodes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org> (for OF)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The fwnode framework did not have means to obtain the name of a node. Add
that now, in form of the fwnode_get_name() function and a corresponding
get_name fwnode op. OF and ACPI support is included.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org> (for OF)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add two convenience functions for accessing node's parents:
fwnode_count_parents() returns the number of parent nodes a given node
has. fwnode_get_nth_parent() returns node's parent at a given distance
from the node itself.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jari Ruusu