1
0
Fork 0
Commit Graph

392 Commits (rM2-mainline)

Author SHA1 Message Date
Jens Axboe caf6912f3f swap: fix swapfile read/write offset
We're not factoring in the start of the file for where to write and
read the swapfile, which leads to very unfortunate side effects of
writing where we should not be...

Fixes: 48d15436fd ("mm: remove get_swap_bio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-02 17:25:46 -07:00
Stephen Zhang cf532faa41 mm/swapfile.c: fix debugging information problem
Once the function name is changed, it may be easy to forget to modify the
corresponding code here.

Link: https://lkml.kernel.org/r/1611369120-2276-1-git-send-email-stephenzhangzsd@gmail.com
Signed-off-by: Stephen Zhang <stephenzhangzsd@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 13:38:28 -08:00
Linus Torvalds 99ca0edb41 arm64 updates for 5.12
- vDSO build improvements including support for building with BSD.
 
  - Cleanup to the AMU support code and initialisation rework to support
    cpufreq drivers built as modules.
 
  - Removal of synthetic frame record from exception stack when entering
    the kernel from EL0.
 
  - Add support for the TRNG firmware call introduced by Arm spec
    DEN0098.
 
  - Cleanup and refactoring across the board.
 
  - Avoid calling arch_get_random_seed_long() from
    add_interrupt_randomness()
 
  - Perf and PMU updates including support for Cortex-A78 and the v8.3
    SPE extensions.
 
  - Significant steps along the road to leaving the MMU enabled during
    kexec relocation.
 
  - Faultaround changes to initialise prefaulted PTEs as 'old' when
    hardware access-flag updates are supported, which drastically
    improves vmscan performance.
 
  - CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
    (#1024718)
 
  - Preparatory work for yielding the vector unit at a finer granularity
    in the crypto code, which in turn will one day allow us to defer
    softirq processing when it is in use.
 
  - Support for overriding CPU ID register fields on the command-line.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmAmwZcQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNLA1B/0XMwWUhmJ4ZPK4sr28YWHNGLuCFHDgkMKU
 dEmS806OF9d0J7fTczGsKdS4IKtXWko67Z0UGiPIStwfm0itSW2Zgbo9KZeDPqPI
 fH0s23nQKxUMyNW7b9p4cTV3YuGVMZSBoMug2jU2DEDpSqeGBk09NPi6inERBCz/
 qZxcqXTKxXbtOY56eJmq09UlFZiwfONubzuCrrUH7LU8ZBSInM/6Q4us/oVm4zYI
 Pnv996mtL4UxRqq/KoU9+cQ1zsI01kt9/coHwfCYvSpZEVAnTWtfECsJ690tr3mF
 TSKQLvOzxbDtU+HcbkNVKW0A38EIO1xXr8yXW9SJx6BJBkyb24xo
 =IwMb
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:

 - vDSO build improvements including support for building with BSD.

 - Cleanup to the AMU support code and initialisation rework to support
   cpufreq drivers built as modules.

 - Removal of synthetic frame record from exception stack when entering
   the kernel from EL0.

 - Add support for the TRNG firmware call introduced by Arm spec
   DEN0098.

 - Cleanup and refactoring across the board.

 - Avoid calling arch_get_random_seed_long() from
   add_interrupt_randomness()

 - Perf and PMU updates including support for Cortex-A78 and the v8.3
   SPE extensions.

 - Significant steps along the road to leaving the MMU enabled during
   kexec relocation.

 - Faultaround changes to initialise prefaulted PTEs as 'old' when
   hardware access-flag updates are supported, which drastically
   improves vmscan performance.

 - CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
   (#1024718)

 - Preparatory work for yielding the vector unit at a finer granularity
   in the crypto code, which in turn will one day allow us to defer
   softirq processing when it is in use.

 - Support for overriding CPU ID register fields on the command-line.

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
  drivers/perf: Replace spin_lock_irqsave to spin_lock
  mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
  arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
  arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
  arm64: Defer enabling pointer authentication on boot core
  arm64: cpufeatures: Allow disabling of BTI from the command-line
  arm64: Move "nokaslr" over to the early cpufeature infrastructure
  KVM: arm64: Document HVC_VHE_RESTART stub hypercall
  arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
  arm64: Add an aliasing facility for the idreg override
  arm64: Honor VHE being disabled from the command-line
  arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
  arm64: cpufeature: Add an early command-line cpufeature override facility
  arm64: Extract early FDT mapping from kaslr_early_init()
  arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
  arm64: cpufeature: Add global feature override facility
  arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
  arm64: Simplify init_el2_state to be non-VHE only
  arm64: Move VHE-specific SPE setup to mutate_to_vhe()
  arm64: Drop early setting of MDSCR_EL2.TPMS
  ...
2021-02-21 13:08:42 -08:00
Christoph Hellwig f885056a48 mm: simplify swapdev_block
Open code the parts of map_swap_entry that was actually used by
swapdev_block, and remove the now unused map_swap_entry function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10 08:23:04 -07:00
Jens Axboe 3e3126cf2a mm: only make map_swap_entry available for CONFIG_HIBERNATION
Current tree spews this on compile:

mm/swapfile.c:2290:17: warning: ‘map_swap_entry’ defined but not used [-Wunused-function]
 2290 | static sector_t map_swap_entry(swp_entry_t entry, struct block_device **bdev)
       |                 ^~~~~~~~~~~~~~

if !CONFIG_HIBERNATION, as we don't use the function unless we have that
config option set.

Fixes: 48d15436fd ("mm: remove get_swap_bio")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 10:04:49 -07:00
Christoph Hellwig 48d15436fd mm: remove get_swap_bio
Just reuse the block_device and sector from the swap_info structure,
just as used by the SWP_SYNCHRONOUS path.  Also remove the checks for
NULL returns from bio_alloc as that can't happen for sleeping
allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27 09:51:49 -07:00
Will Deacon 8c63ca5bc3 mm: Use static initialisers for immutable fields of 'struct vm_fault'
In preparation for const-ifying the anonymous struct field of
'struct vm_fault', ensure that it is initialised using designated
initialisers.

Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
2021-01-21 12:50:18 +00:00
Zhaoyang Huang b50da6e9f4 mm: fix a race on nr_swap_pages
The scenario on which "Free swap = -4kB" happens in my system, which is caused
by several get_swap_pages racing with each other and show_swap_cache_info
happens simutaniously. No need to add a lock on get_swap_page_of_type as we
remove "Presub/PosAdd" here.

ProcessA			ProcessB			ProcessC
ngoals = 1			ngoals = 1
avail = nr_swap_pages(1)	avail = nr_swap_pages(1)
nr_swap_pages(1) -= ngoals
				nr_swap_pages(0) -= ngoals
								nr_swap_pages = -1

Link: https://lkml.kernel.org/r/1607050340-4535-1-git-send-email-zhaoyang.huang@unisoc.com
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 22:46:15 -08:00
Miaohe Lin 661c756643 mm/swapfile.c: use memset to fill the swap_map with SWAP_HAS_CACHE
We could use helper memset to fill the swap_map with SWAP_HAS_CACHE instead
of a direct loop here to simplify the code. Also we can remove the local
variable i and map this way.

Link: https://lkml.kernel.org/r/20200921122224.7139-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:39 -08:00
Miaohe Lin 9d9a033403 mm/swapfile.c: remove unnecessary out label in __swap_duplicate()
When the code went to the out label, it must have p == NULL.  So what out
label really does is redundant if check and return err.  We should Remove
this unnecessary out label because it does not handle resource free and so
on.

Link: https://lkml.kernel.org/r/20201009130337.29698-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:39 -08:00
Miaohe Lin d8aa24e04f mm/swapfile.c: use helper function swap_count() in add_swap_count_continuation()
Commit 570a335b8e ("swap_info: swap count continuations") introduced the
func add_swap_count_continuation() but forgot to use the helper function
swap_count() introduced by commit 355cfa73dd ("mm: modify swap_map and
add SWAP_HAS_CACHE flag").

Link: https://lkml.kernel.org/r/20201009134306.18033-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:39 -08:00
Qian Cai b11a76b37a mm/swapfile: do not sleep with a spin lock held
We can't call kvfree() with a spin lock held, so defer it.  Fixes a
might_sleep() runtime warning.

Fixes: 873d7bcfd0 ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation")
Signed-off-by: Qian Cai <qcai@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201202151549.10350-1-qcai@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-06 10:19:07 -08:00
Miaohe Lin 822bca52ee mm/swapfile.c: fix potential memory leak in sys_swapon
If we failed to drain inode, we would forget to free the swap address
space allocated by init_swap_address_space() above.

Fixes: dc617f29db ("vfs: don't allow writes to swap files")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lkml.kernel.org/r/20200930101803.53884-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 18:38:30 -07:00
Miaohe Lin 7a3d52e45e mm/swapfile.c: remove unnecessary goto out in _swap_info_get()
It's unnecessary to goto the out label while out label is just below.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200930102549.1885-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 18:38:30 -07:00
Yu Zhao cc2828b21c mm: remove activate_page() from unuse_pte()
We don't initially add anon pages to active lruvec after commit
b518154e59 ("mm/vmscan: protect the workingset on anonymous LRU").
Remove activate_page() from unuse_pte(), which seems to be missed by the
commit.  And make the function static while we are at it.

Before the commit, we called lru_cache_add_active_or_unevictable() to add
new ksm pages to active lruvec.  Therefore, activate_page() wasn't
necessary for them in the first place.

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200818184704.3625199-1-yuzhao@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 18:38:30 -07:00
Gao Xiang 3264631548 swap: rename SWP_FS to SWAP_FS_OPS to avoid ambiguity
SWP_FS is used to make swap_{read,write}page() go through the filesystem,
and it's only used for swap files over NFS for now.  Otherwise it will
directly submit IO to blockdev according to swapfile extents reported by
filesystems in advance.

As Matthew pointed out [1], SWP_FS naming is somewhat confusing, so let's
rename to SWP_FS_OPS.

[1] https://lore.kernel.org/r/20200820113448.GM17456@casper.infradead.org

Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200822113019.11319-1-hsiangkao@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 18:38:29 -07:00
Linus Torvalds 3ad11d7ac8 block-5.10-2020-10-12
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl+EWUgQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpnoxEADCVSNBRkpV0OVkOEC3wf8EGhXhk01Jnjtl
 u5Mg2V55hcgJ0thQxBV/V28XyqmsEBrmAVi0Yf8Vr9Qbq4Ze08Wae4ChS4rEOyh1
 jTcGYWx5aJB3ChLvV/HI0nWQ3bkj03mMrL3SW8rhhf5DTyKHsVeTenpx42Qu/FKf
 fRzi09FSr3Pjd0B+EX6gunwJnlyXQC5Fa4AA0GhnXJzAznANXxHkkcXu8a6Yw75x
 e28CfhIBliORsK8sRHLoUnPpeTe1vtxCBhBMsE+gJAj9ZUOWMzvNFIPP4FvfawDy
 6cCQo2m1azJ/IdZZCDjFUWyjh+wxdKMp+NNryEcoV+VlqIoc3n98rFwrSL+GIq5Z
 WVwEwq+AcwoMCsD29Lu1ytL2PQ/RVqcJP5UheMrbL4vzefNfJFumQVZLIcX0k943
 8dFL2QHL+H/hM9Dx5y5rjeiWkAlq75v4xPKVjh/DHb4nehddCqn/+DD5HDhNANHf
 c1kmmEuYhvLpIaC4DHjE6DwLh8TPKahJjwsGuBOTr7D93NUQD+OOWsIhX6mNISIl
 FFhP8cd0/ZZVV//9j+q+5B4BaJsT+ZtwmrelKFnPdwPSnh+3iu8zPRRWO+8P8fRC
 YvddxuJAmE6BLmsAYrdz6Xb/wqfyV44cEiyivF0oBQfnhbtnXwDnkDWSfJD1bvCm
 ZwfpDh2+Tg==
 =LzyE
 -----END PGP SIGNATURE-----

Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:

 - Series of merge handling cleanups (Baolin, Christoph)

 - Series of blk-throttle fixes and cleanups (Baolin)

 - Series cleaning up BDI, seperating the block device from the
   backing_dev_info (Christoph)

 - Removal of bdget() as a generic API (Christoph)

 - Removal of blkdev_get() as a generic API (Christoph)

 - Cleanup of is-partition checks (Christoph)

 - Series reworking disk revalidation (Christoph)

 - Series cleaning up bio flags (Christoph)

 - bio crypt fixes (Eric)

 - IO stats inflight tweak (Gabriel)

 - blk-mq tags fixes (Hannes)

 - Buffer invalidation fixes (Jan)

 - Allow soft limits for zone append (Johannes)

 - Shared tag set improvements (John, Kashyap)

 - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)

 - DM no-wait support (Mike, Konstantin)

 - Request allocation improvements (Ming)

 - Allow md/dm/bcache to use IO stat helpers (Song)

 - Series improving blk-iocost (Tejun)

 - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
   Xianting, Yang, Yufen, yangerkun)

* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
  block: fix uapi blkzoned.h comments
  blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
  blk-mq: get rid of the dead flush handle code path
  block: get rid of unnecessary local variable
  block: fix comment and add lockdep assert
  blk-mq: use helper function to test hw stopped
  block: use helper function to test queue register
  block: remove redundant mq check
  block: invoke blk_mq_exit_sched no matter whether have .exit_sched
  percpu_ref: don't refer to ref->data if it isn't allocated
  block: ratelimit handle_bad_sector() message
  blk-throttle: Re-use the throtl_set_slice_end()
  blk-throttle: Open code __throtl_de/enqueue_tg()
  blk-throttle: Move service tree validation out of the throtl_rb_first()
  blk-throttle: Move the list operation after list validation
  blk-throttle: Fix IO hang for a corner case
  blk-throttle: Avoid tracking latency if low limit is invalid
  blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
  blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
  block: Remove redundant 'return' statement
  ...
2020-10-13 12:12:44 -07:00
Linus Torvalds 6734e20e39 arm64 updates for 5.10
- Userspace support for the Memory Tagging Extension introduced by Armv8.5.
   Kernel support (via KASAN) is likely to follow in 5.11.
 
 - Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
   switching.
 
 - Fix and subsequent rewrite of our Spectre mitigations, including the
   addition of support for PR_SPEC_DISABLE_NOEXEC.
 
 - Support for the Armv8.3 Pointer Authentication enhancements.
 
 - Support for ASID pinning, which is required when sharing page-tables with
   the SMMU.
 
 - MM updates, including treating flush_tlb_fix_spurious_fault() as a no-op.
 
 - Perf/PMU driver updates, including addition of the ARM CMN PMU driver and
   also support to handle CPU PMU IRQs as NMIs.
 
 - Allow prefetchable PCI BARs to be exposed to userspace using normal
   non-cacheable mappings.
 
 - Implementation of ARCH_STACKWALK for unwinding.
 
 - Improve reporting of unexpected kernel traps due to BPF JIT failure.
 
 - Improve robustness of user-visible HWCAP strings and their corresponding
   numerical constants.
 
 - Removal of TEXT_OFFSET.
 
 - Removal of some unused functions, parameters and prototypes.
 
 - Removal of MPIDR-based topology detection in favour of firmware
   description.
 
 - Cleanups to handling of SVE and FPSIMD register state in preparation
   for potential future optimisation of handling across syscalls.
 
 - Cleanups to the SDEI driver in preparation for support in KVM.
 
 - Miscellaneous cleanups and refactoring work.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl+AUXMQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNFc1B/4q2Kabe+pPu7s1f58Q+OTaEfqcr3F1qh27
 F1YpFZUYxg0GPfPsFrnbJpo5WKo7wdR9ceI9yF/GHjs7A/MSoQJis3pG6SlAd9c0
 nMU5tCwhg9wfq6asJtl0/IPWem6cqqhdzC6m808DjeHuyi2CCJTt0vFWH3OeHEhG
 cfmLfaSNXOXa/MjEkT8y1AXJ/8IpIpzkJeCRA1G5s18PXV9Kl5bafIo9iqyfKPLP
 0rJljBmoWbzuCSMc81HmGUQI4+8KRp6HHhyZC/k0WEVgj3LiumT7am02bdjZlTnK
 BeNDKQsv2Jk8pXP2SlrI3hIUTz0bM6I567FzJEokepvTUzZ+CVBi
 =9J8H
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "There's quite a lot of code here, but much of it is due to the
  addition of a new PMU driver as well as some arm64-specific selftests
  which is an area where we've traditionally been lagging a bit.

  In terms of exciting features, this includes support for the Memory
  Tagging Extension which narrowly missed 5.9, hopefully allowing
  userspace to run with use-after-free detection in production on CPUs
  that support it. Work is ongoing to integrate the feature with KASAN
  for 5.11.

  Another change that I'm excited about (assuming they get the hardware
  right) is preparing the ASID allocator for sharing the CPU page-table
  with the SMMU. Those changes will also come in via Joerg with the
  IOMMU pull.

  We do stray outside of our usual directories in a few places, mostly
  due to core changes required by MTE. Although much of this has been
  Acked, there were a couple of places where we unfortunately didn't get
  any review feedback.

  Other than that, we ran into a handful of minor conflicts in -next,
  but nothing that should post any issues.

  Summary:

   - Userspace support for the Memory Tagging Extension introduced by
     Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11.

   - Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
     switching.

   - Fix and subsequent rewrite of our Spectre mitigations, including
     the addition of support for PR_SPEC_DISABLE_NOEXEC.

   - Support for the Armv8.3 Pointer Authentication enhancements.

   - Support for ASID pinning, which is required when sharing
     page-tables with the SMMU.

   - MM updates, including treating flush_tlb_fix_spurious_fault() as a
     no-op.

   - Perf/PMU driver updates, including addition of the ARM CMN PMU
     driver and also support to handle CPU PMU IRQs as NMIs.

   - Allow prefetchable PCI BARs to be exposed to userspace using normal
     non-cacheable mappings.

   - Implementation of ARCH_STACKWALK for unwinding.

   - Improve reporting of unexpected kernel traps due to BPF JIT
     failure.

   - Improve robustness of user-visible HWCAP strings and their
     corresponding numerical constants.

   - Removal of TEXT_OFFSET.

   - Removal of some unused functions, parameters and prototypes.

   - Removal of MPIDR-based topology detection in favour of firmware
     description.

   - Cleanups to handling of SVE and FPSIMD register state in
     preparation for potential future optimisation of handling across
     syscalls.

   - Cleanups to the SDEI driver in preparation for support in KVM.

   - Miscellaneous cleanups and refactoring work"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
  Revert "arm64: initialize per-cpu offsets earlier"
  arm64: random: Remove no longer needed prototypes
  arm64: initialize per-cpu offsets earlier
  kselftest/arm64: Check mte tagged user address in kernel
  kselftest/arm64: Verify KSM page merge for MTE pages
  kselftest/arm64: Verify all different mmap MTE options
  kselftest/arm64: Check forked child mte memory accessibility
  kselftest/arm64: Verify mte tag inclusion via prctl
  kselftest/arm64: Add utilities and a test to validate mte memory
  perf: arm-cmn: Fix conversion specifiers for node type
  perf: arm-cmn: Fix unsigned comparison to less than zero
  arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
  arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
  arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
  arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
  KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
  arm64: Get rid of arm64_ssbd_state
  KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
  KVM: arm64: Get rid of kvm_arm_have_ssbd()
  KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
  ...
2020-10-12 10:00:51 -07:00
Gao Xiang 4166343058 mm, THP, swap: fix allocating cluster for swapfile by mistake
SWP_FS is used to make swap_{read,write}page() go through the
filesystem, and it's only used for swap files over NFS.  So, !SWP_FS
means non NFS for now, it could be either file backed or device backed.
Something similar goes with legacy SWP_FILE.

So in order to achieve the goal of the original patch, SWP_BLKDEV should
be used instead.

FS corruption can be observed with SSD device + XFS + fragmented
swapfile due to CONFIG_THP_SWAP=y.

I reproduced the issue with the following details:

Environment:

  QEMU + upstream kernel + buildroot + NVMe (2 GB)

Kernel config:

  CONFIG_BLK_DEV_NVME=y
  CONFIG_THP_SWAP=y

Some reproducible steps:

  mkfs.xfs -f /dev/nvme0n1
  mkdir /tmp/mnt
  mount /dev/nvme0n1 /tmp/mnt
  bs="32k"
  sz="1024m"    # doesn't matter too much, I also tried 16m
  xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
  xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
  xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
  xfs_io -f -c "pwrite -F -S 0 -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw
  xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fsync" /tmp/mnt/sw

  mkswap /tmp/mnt/sw
  swapon /tmp/mnt/sw

  stress --vm 2 --vm-bytes 600M   # doesn't matter too much as well

Symptoms:
 - FS corruption (e.g. checksum failure)
 - memory corruption at: 0xd2808010
 - segfault

Fixes: f0eea189e8 ("mm, THP, swap: Don't allocate huge cluster for file backed swap device")
Fixes: 38d8b4e6bd ("mm, THP, swap: delay splitting THP during swap out")
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Eric Sandeen <esandeen@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200820045323.7809-1-hsiangkao@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-26 10:33:57 -07:00
Christoph Hellwig 1cb039f3dc bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the
backing_dev_info shared between the block drivers and the writeback code.
To help untangling the dependency replace it with a queue flag and a
superblock flag derived from it.  This also helps with the case of e.g.
a file system requiring stable writes due to its own checksumming, but
not forcing it on other users of the block device like the swap code.

One downside is that we an't support the stable_pages_required bdi
attribute in sysfs anymore.  It is replaced with a queue attribute which
also is writable for easier testing.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24 13:43:39 -06:00
Christoph Hellwig a8b456d01c bdi: remove BDI_CAP_SYNCHRONOUS_IO
BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to
decided if ->rw_page can be used on a block device.  Just check up for
the method instead.  The only complication is that zram needs a second
set of block_device_operations as it can switch between modes that
actually support ->rw_page and those who don't.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24 13:43:39 -06:00
Christoph Hellwig 21bd900572 mm: split swap_type_of
swap_type_of is used for two entirely different purposes:

 (1) check what swap type a given device/offset corresponds to
 (2) find the first available swap device that can be written to

Mixing both in a single function creates an unreadable mess.  Create two
separate functions instead, and switch both to pass a dev_t instead of
a struct block_device to further simplify the code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23 10:43:19 -06:00
Christoph Hellwig ef16e1d98c mm: cleanup claim_swapfile
Use blkdev_get_by_dev instead of bdgrab + blkdev_get.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-23 10:43:19 -06:00
Steven Price 8a84802e2a mm: Add arch hooks for saving/restoring tags
Arm's Memory Tagging Extension (MTE) adds some metadata (tags) to
every physical page, when swapping pages out to disk it is necessary to
save these tags, and later restore them when reading the pages back.

Add some hooks along with dummy implementations to enable the
arch code to handle this.

Three new hooks are added to the swap code:
 * arch_prepare_to_swap() and
 * arch_swap_invalidate_page() / arch_swap_invalidate_area().
One new hook is added to shmem:
 * arch_swap_restore()

Signed-off-by: Steven Price <steven.price@arm.com>
[catalin.marinas@arm.com: add unlock_page() on the error path]
[catalin.marinas@arm.com: dropped the _tags suffix]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
2020-09-04 12:46:07 +01:00
Qian Cai a449bf58e4 mm/swapfile: fix and annotate various data races
swap_info_struct si.highest_bit, si.swap_map[offset] and si.flags could
be accessed concurrently separately as noticed by KCSAN,

=== si.highest_bit ===

 write to 0xffff8d5abccdc4d4 of 4 bytes by task 5353 on cpu 24:
  swap_range_alloc+0x81/0x130
  swap_range_alloc at mm/swapfile.c:681
  scan_swap_map_slots+0x371/0xb90
  get_swap_pages+0x39d/0x5c0
  get_swap_page+0xf2/0x524
  add_to_swap+0xe4/0x1c0
  shrink_page_list+0x1795/0x2870
  shrink_inactive_list+0x316/0x880
  shrink_lruvec+0x8dc/0x1380
  shrink_node+0x317/0xd80
  do_try_to_free_pages+0x1f7/0xa10
  try_to_free_pages+0x26c/0x5e0
  __alloc_pages_slowpath+0x458/0x1290

 read to 0xffff8d5abccdc4d4 of 4 bytes by task 6672 on cpu 70:
  scan_swap_map_slots+0x4a6/0xb90
  scan_swap_map_slots at mm/swapfile.c:892
  get_swap_pages+0x39d/0x5c0
  get_swap_page+0xf2/0x524
  add_to_swap+0xe4/0x1c0
  shrink_page_list+0x1795/0x2870
  shrink_inactive_list+0x316/0x880
  shrink_lruvec+0x8dc/0x1380
  shrink_node+0x317/0xd80
  do_try_to_free_pages+0x1f7/0xa10
  try_to_free_pages+0x26c/0x5e0
  __alloc_pages_slowpath+0x458/0x1290

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 70 PID: 6672 Comm: oom01 Tainted: G        W    L 5.5.0-next-20200205+ #3
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

=== si.swap_map[offset] ===

 write to 0xffffbc370c29a64c of 1 bytes by task 6856 on cpu 86:
  __swap_entry_free_locked+0x8c/0x100
  __swap_entry_free_locked at mm/swapfile.c:1209 (discriminator 4)
  __swap_entry_free.constprop.20+0x69/0xb0
  free_swap_and_cache+0x53/0xa0
  unmap_page_range+0x7f8/0x1d70
  unmap_single_vma+0xcd/0x170
  unmap_vmas+0x18b/0x220
  exit_mmap+0xee/0x220
  mmput+0x10e/0x270
  do_exit+0x59b/0xf40
  do_group_exit+0x8b/0x180

 read to 0xffffbc370c29a64c of 1 bytes by task 6855 on cpu 20:
  _swap_info_get+0x81/0xa0
  _swap_info_get at mm/swapfile.c:1140
  free_swap_and_cache+0x40/0xa0
  unmap_page_range+0x7f8/0x1d70
  unmap_single_vma+0xcd/0x170
  unmap_vmas+0x18b/0x220
  exit_mmap+0xee/0x220
  mmput+0x10e/0x270
  do_exit+0x59b/0xf40
  do_group_exit+0x8b/0x180

=== si.flags ===

 write to 0xffff956c8fc6c400 of 8 bytes by task 6087 on cpu 23:
  scan_swap_map_slots+0x6fe/0xb50
  scan_swap_map_slots at mm/swapfile.c:887
  get_swap_pages+0x39d/0x5c0
  get_swap_page+0x377/0x524
  add_to_swap+0xe4/0x1c0
  shrink_page_list+0x1795/0x2870
  shrink_inactive_list+0x316/0x880
  shrink_lruvec+0x8dc/0x1380
  shrink_node+0x317/0xd80
  do_try_to_free_pages+0x1f7/0xa10
  try_to_free_pages+0x26c/0x5e0
  __alloc_pages_slowpath+0x458/0x1290

 read to 0xffff956c8fc6c400 of 8 bytes by task 6207 on cpu 63:
  _swap_info_get+0x41/0xa0
  __swap_info_get at mm/swapfile.c:1114
  put_swap_page+0x84/0x490
  __remove_mapping+0x384/0x5f0
  shrink_page_list+0xff1/0x2870
  shrink_inactive_list+0x316/0x880
  shrink_lruvec+0x8dc/0x1380
  shrink_node+0x317/0xd80
  do_try_to_free_pages+0x1f7/0xa10
  try_to_free_pages+0x26c/0x5e0
  __alloc_pages_slowpath+0x458/0x1290

The writes are under si->lock but the reads are not. For si.highest_bit
and si.swap_map[offset], data race could trigger logic bugs, so fix them
by having WRITE_ONCE() for the writes and READ_ONCE() for the reads
except those isolated reads where they compare against zero which a data
race would cause no harm. Thus, annotate them as intentional data races
using the data_race() macro.

For si.flags, the readers are only interested in a single bit where a
data race there would cause no issue there.

[cai@lca.pw: add a missing annotation for si->flags in memory.c]
  Link: http://lkml.kernel.org/r/1581612647-5958-1-git-send-email-cai@lca.pw

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/1581095163-12198-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14 19:56:57 -07:00
Matthew Wilcox (Oracle) 6c357848b4 mm: replace hpage_nr_pages with thp_nr_pages
The thp prefix is more frequently used than hpage and we should be
consistent between the various functions.

[akpm@linux-foundation.org: fix mm/migrate.c]

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-6-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14 19:56:56 -07:00
Joonsoo Kim 3852f6768e mm/swapcache: support to handle the shadow entries
Workingset detection for anonymous page will be implemented in the
following patch and it requires to store the shadow entries into the
swapcache.  This patch implements an infrastructure to store the shadow
entry in the swapcache.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/1595490560-15117-5-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:55 -07:00
Joonsoo Kim b518154e59 mm/vmscan: protect the workingset on anonymous LRU
In current implementation, newly created or swap-in anonymous page is
started on active list.  Growing active list results in rebalancing
active/inactive list so old pages on active list are demoted to inactive
list.  Hence, the page on active list isn't protected at all.

Following is an example of this situation.

Assume that 50 hot pages on active list.  Numbers denote the number of
pages on active/inactive list (active | inactive).

1. 50 hot pages on active list
50(h) | 0

2. workload: 50 newly created (used-once) pages
50(uo) | 50(h)

3. workload: another 50 newly created (used-once) pages
50(uo) | 50(uo), swap-out 50(h)

This patch tries to fix this issue.  Like as file LRU, newly created or
swap-in anonymous pages will be inserted to the inactive list.  They are
promoted to active list if enough reference happens.  This simple
modification changes the above example as following.

1. 50 hot pages on active list
50(h) | 0

2. workload: 50 newly created (used-once) pages
50(h) | 50(uo)

3. workload: another 50 newly created (used-once) pages
50(h) | 50(uo), swap-out 50(uo)

As you can see, hot pages on active list would be protected.

Note that, this implementation has a drawback that the page cannot be
promoted and will be swapped-out if re-access interval is greater than the
size of inactive list but less than the size of total(active+inactive).
To solve this potential issue, following patch will apply workingset
detection similar to the one that's already applied to file LRU.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Link: http://lkml.kernel.org/r/1595490560-15117-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:55 -07:00
Christoph Hellwig e556f6ba10 block: remove the bd_queue field from struct block_device
Just use bd_disk->queue instead.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01 08:08:20 -06:00
Michel Lespinasse d8ed45c5dc mmap locking API: use coccinelle to convert mmap_sem rwsem call sites
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.

The change is generated using coccinelle with the following rule:

// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .

@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Mike Rapoport e31cf2f4ca mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include <linux/mm.h>") ; do
		sed -i -e '/include <asm\/pgtable.h>/ d' $f
	done

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Johannes Weiner 4c6355b25e mm: memcontrol: charge swapin pages on instantiation
Right now, users that are otherwise memory controlled can easily escape
their containment and allocate significant amounts of memory that they're
not being charged for.  That's because swap readahead pages are not being
charged until somebody actually faults them into their page table.  This
can be exploited with MADV_WILLNEED, which triggers arbitrary readahead
allocations without charging the pages.

There are additional problems with the delayed charging of swap pages:

1. To implement refault/workingset detection for anonymous pages, we
   need to have a target LRU available at swapin time, but the LRU is not
   determinable until the page has been charged.

2. To implement per-cgroup LRU locking, we need page->mem_cgroup to be
   stable when the page is isolated from the LRU; otherwise, the locks
   change under us.  But swapcache gets charged after it's already on the
   LRU, and even if we cannot isolate it ourselves (since charging is not
   exactly optional).

The previous patch ensured we always maintain cgroup ownership records for
swap pages.  This patch moves the swapcache charging point from the fault
handler to swapin time to fix all of the above problems.

v2: simplify swapin error checking (Joonsoo)

[hughd@google.com: fix livelock in __read_swap_cache_async()]
  Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005212246080.8458@eggly.anvils
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-17-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:48 -07:00
Johannes Weiner 9d82c69438 mm: memcontrol: convert anon and file-thp to new mem_cgroup_charge() API
With the page->mapping requirement gone from memcg, we can charge anon and
file-thp pages in one single step, right after they're allocated.

This removes two out of three API calls - especially the tricky commit
step that needed to happen at just the right time between when the page is
"set up" and when it's "published" - somewhat vague and fluid concepts
that varied by page type.  All we need is a freshly allocated page and a
memcg context to charge.

v2: prevent double charges on pre-allocated hugepages in khugepaged

[hannes@cmpxchg.org: Fix crash - *hpage could be ERR_PTR instead of NULL]
  Link: http://lkml.kernel.org/r/20200512215813.GA487759@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200508183105.225460-13-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:48 -07:00
Johannes Weiner be5d0a74c6 mm: memcontrol: switch to native NR_ANON_MAPPED counter
Memcg maintains a private MEMCG_RSS counter.  This divergence from the
generic VM accounting means unnecessary code overhead, and creates a
dependency for memcg that page->mapping is set up at the time of charging,
so that page types can be told apart.

Convert the generic accounting sites to mod_lruvec_page_state and friends
to maintain the per-cgroup vmstat counter of NR_ANON_MAPPED.  We use
lock_page_memcg() to stabilize page->mem_cgroup during rmap changes, the
same way we do for NR_FILE_MAPPED.

With the previous patch removing MEMCG_CACHE and the private NR_SHMEM
counter, this patch finally eliminates the need to have page->mapping set
up at charge time.  However, we need to have page->mem_cgroup set up by
the time rmap runs and does the accounting, so switch the commit and the
rmap callbacks around.

v2: fix temporary accounting bug by switching rmap<->commit (Joonsoo)

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-11-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:47 -07:00
Johannes Weiner 6caa6a0703 mm: memcontrol: move out cgroup swaprate throttling
The cgroup swaprate throttling is about matching new anon allocations to
the rate of available IO when that is being throttled.  It's the io
controller hooking into the VM, rather than a memory controller thing.

Rename mem_cgroup_throttle_swaprate() to cgroup_throttle_swaprate(), and
drop the @memcg argument which is only used to check whether the preceding
page charge has succeeded and the fault is proceeding.

We could decouple the call from mem_cgroup_try_charge() here as well, but
that would cause unnecessary churn: the following patches convert all
callsites to a new charge API and we'll decouple as we go along.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-5-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:47 -07:00
Johannes Weiner 3fba69a56e mm: memcontrol: drop @compound parameter from memcg charging API
The memcg charging API carries a boolean @compound parameter that tells
whether the page we're dealing with is a hugepage.
mem_cgroup_commit_charge() has another boolean @lrucare that indicates
whether the page needs LRU locking or not while charging.  The majority of
callsites know those parameters at compile time, which results in a lot of
naked "false, false" argument lists.  This makes for cryptic code and is a
breeding ground for subtle mistakes.

Thankfully, the huge page state can be inferred from the page itself and
doesn't need to be passed along.  This is safe because charging completes
before the page is published and somebody may split it.

Simplify the callsites by removing @compound, and let memcg infer the
state by using hpage_nr_pages() unconditionally.  That function does
PageTransHuge() to identify huge pages, which also helpfully asserts that
nobody passes in tail pages by accident.

The following patches will introduce a new charging API, best not to carry
over unnecessary weight.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200508183105.225460-4-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:47 -07:00
Randy Dunlap 6f7939405f mm: swapfile: fix /proc/swaps heading and Size/Used/Priority alignment
Fix the heading and Size/Used/Priority field alignments in /proc/swaps.
If the Size and/or Used value is >= 10000000 (8 bytes), then the
alignment by using tab characters is broken.

This patch maintains the use of tabs for alignment.  If spaces are
preferred, we can just use a Field Width specifier for the bytes and
inuse fields.  That way those fields don't have to be a multiple of 8
bytes in width.  E.g., with a field width of 12, both Size and Used
would always fit on the first line of an 80-column wide terminal (only
Priority would be on the second line).

There are actually 2 problems: heading alignment and field width.  On an
xterm, if Used is 7 bytes in length, the tab does nothing, and the
display is like this, with no space/tab between the Used and Priority
fields.  (ugh)

Filename				Type		Size	Used	Priority
/dev/sda8                               partition	16779260	2023012-1

To be clear, if one does 'cat /proc/swaps >/tmp/proc.swaps', it does look
different, like so:

Filename				Type		Size	Used	Priority
/dev/sda8                               partition	16779260	2086988	-1

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/c0ffb41a-81ac-ddfa-d452-a9229ecc0387@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:09 -07:00
Huang Ying 4907058881 swap: reduce lock contention on swap cache from swap slots allocation
In some swap scalability test, it is found that there are heavy lock
contention on swap cache even if we have split one swap cache radix tree
per swap device to one swap cache radix tree every 64 MB trunk in commit
4b3ef9daa4 ("mm/swap: split swap cache into 64MB trunks").

The reason is as follow.  After the swap device becomes fragmented so
that there's no free swap cluster, the swap device will be scanned
linearly to find the free swap slots.  swap_info_struct->cluster_next is
the next scanning base that is shared by all CPUs.  So nearby free swap
slots will be allocated for different CPUs.  The probability for
multiple CPUs to operate on the same 64 MB trunk is high.  This causes
the lock contention on the swap cache.

To solve the issue, in this patch, for SSD swap device, a percpu version
next scanning base (cluster_next_cpu) is added.  Every CPU will use its
own per-cpu next scanning base.  And after finishing scanning a 64MB
trunk, the per-cpu scanning base will be changed to the beginning of
another randomly selected 64MB trunk.  In this way, the probability for
multiple CPUs to operate on the same 64 MB trunk is reduced greatly.
Thus the lock contention is reduced too.  For HDD, because sequential
access is more important for IO performance, the original shared next
scanning base is used.

To test the patch, we have run 16-process pmbench memory benchmark on a
2-socket server machine with 48 cores.  One ram disk is configured as the
swap device per socket.  The pmbench working-set size is much larger than
the available memory so that swapping is triggered.  The memory read/write
ratio is 80/20 and the accessing pattern is random.  In the original
implementation, the lock contention on the swap cache is heavy.  The perf
profiling data of the lock contention code path is as following,

 _raw_spin_lock_irq.add_to_swap_cache.add_to_swap.shrink_page_list:      7.91
 _raw_spin_lock_irqsave.__remove_mapping.shrink_page_list:               7.11
 _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 2.51
 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap:     1.66
 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node:      1.29
 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages:         1.03
 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node:        0.93

After applying this patch, it becomes,

 _raw_spin_lock.swapcache_free_entries.free_swap_slot.__swap_entry_free: 3.58
 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node:      2.3
 _raw_spin_lock_irqsave.swap_cgroup_record.mem_cgroup_uncharge_swap:     2.26
 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node:        1.8
 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages:         1.19

The lock contention on the swap cache is almost eliminated.

And the pmbench score increases 18.5%.  The swapin throughput increases
18.7% from 2.96 GB/s to 3.51 GB/s.  While the swapout throughput increases
18.5% from 2.99 GB/s to 3.54 GB/s.

We need really fast disk to show the benefit.  I have tried this on 2
Intel P3600 NVMe disks.  The performance improvement is only about 1%.
The improvement should be better on the faster disks, such as Intel Optane
disk.

[ying.huang@intel.com: fix cluster_next_cpu allocation and freeing, per Daniel]
  Link: http://lkml.kernel.org/r/20200525002648.336325-1-ying.huang@intel.com
[ying.huang@intel.com: v4]
  Link: http://lkml.kernel.org/r/20200529010840.928819-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200520031502.175659-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:09 -07:00
Huang Ying 09fe06ce0b mm/swapfile.c: use prandom_u32_max()
To improve the code readability and take advantage of the common
implementation.

Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200512081013.520201-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:09 -07:00
Wei Yang 33e16272fe mm/swapfile.c: __swap_entry_free() always free 1 entry
__swap_entry_free() always frees 1 entry.  Let's remove the usage.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200501015259.32237-2-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:09 -07:00
Huang Ying ed43af1097 swap: try to scan more free slots even when fragmented
Now, the scalability of swap code will drop much when the swap device
becomes fragmented, because the swap slots allocation batching stops
working.  To solve the problem, in this patch, we will try to scan a
little more swap slots with restricted effort to batch the swap slots
allocation even if the swap device is fragmented.  Test shows that the
benchmark score can increase up to 37.1% with the patch.  Details are as
follows.

The swap code has a per-cpu cache of swap slots.  These batch swap space
allocations to improve swap subsystem scaling.  In the following code
path,

  add_to_swap()
    get_swap_page()
      refill_swap_slots_cache()
        get_swap_pages()
	  scan_swap_map_slots()

scan_swap_map_slots() and get_swap_pages() can return multiple swap
slots for each call.  These slots will be cached in the per-CPU swap
slots cache, so that several following swap slot requests will be
fulfilled there to avoid the lock contention in the lower level swap
space allocation/freeing code path.

But this only works when there are free swap clusters.  If a swap device
becomes so fragmented that there's no free swap clusters,
scan_swap_map_slots() and get_swap_pages() will return only one swap
slot for each call in the above code path.  Effectively, this falls back
to the situation before the swap slots cache was introduced, the heavy
lock contention on the swap related locks kills the scalability.

Why does it work in this way? Because the swap device could be large,
and the free swap slot scanning could be quite time consuming, to avoid
taking too much time to scanning free swap slots, the conservative
method was used.

In fact, this can be improved via scanning a little more free slots with
strictly restricted effort.  Which is implemented in this patch.  In
scan_swap_map_slots(), after the first free swap slot is gotten, we will
try to scan a little more, but only if we haven't scanned too many slots
(< LATENCY_LIMIT).  That is, the added scanning latency is strictly
restricted.

To test the patch, we have run 16-process pmbench memory benchmark on a
2-socket server machine with 48 cores.  Multiple ram disks are
configured as the swap devices.  The pmbench working-set size is much
larger than the available memory so that swapping is triggered.  The
memory read/write ratio is 80/20 and the accessing pattern is random, so
the swap space becomes highly fragmented during the test.  In the
original implementation, the lock contention on swap related locks is
very heavy.  The perf profiling data of the lock contention code path is
as following,

 _raw_spin_lock.get_swap_pages.get_swap_page.add_to_swap:             21.03
 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node:    1.92
 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node:      1.72
 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages:       0.69

While after applying this patch, it becomes,

 _raw_spin_lock_irq.shrink_inactive_list.shrink_lruvec.shrink_node:    4.89
 _raw_spin_lock_irq.shrink_active_list.shrink_lruvec.shrink_node:      3.85
 _raw_spin_lock.free_pcppages_bulk.drain_pages_zone.drain_pages:       1.1
 _raw_spin_lock_irqsave.pagevec_lru_move_fn.__lru_cache_add.do_swap_page: 0.88

That is, the lock contention on the swap locks is eliminated.

And the pmbench score increases 37.1%.  The swapin throughput increases
45.7% from 2.02 GB/s to 2.94 GB/s.  While the swapout throughput increases
45.3% from 2.04 GB/s to 2.97 GB/s.

Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200427030023.264780-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:09 -07:00
Wei Yang 7b9e2de130 mm/swapfile.c: omit a duplicate code by compare tmp and max first
There are two duplicate code to handle the case when there is no available
swap entry.  To avoid this, we can compare tmp and max first and let the
second guard do its job.

No functional change is expected.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200421213824.8099-3-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:09 -07:00
Wei Yang fdff1debb9 mm/swapfile.c: tmp is always smaller than max
If tmp is bigger or equal to max, we would jump to new_cluster.

Return true directly.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200421213824.8099-2-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:09 -07:00
Wei Yang 0fd0e19e4d mm/swapfile.c: found_free could be represented by (tmp < max)
This is not necessary to use the variable found_free to record the status.
Just check tmp and max is enough.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200421213824.8099-1-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:09 -07:00
Wei Yang abca1c84b7 mm/swapfile.c: remove the extra check in scan_swap_map_slots()
scan_swap_map_slots() is only called by scan_swap_map() and
get_swap_pages().  Both ensure nr would not exceed SWAP_BATCH.

Just remove it.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200325220309.9803-2-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:09 -07:00
Wei Yang 08d3090fc8 mm/swapfile.c: simplify the calculation of n_goal
Use min3() to simplify the comparison and make it more self-explaining.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200325220309.9803-1-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:08 -07:00
Wei Yang bd2d18da4a mm/swapfile.c: remove the unnecessary goto for SSD case
Now we can see there is redundant goto for SSD case.  In these two places,
we can just let the code walk through to the correct tag instead of
explicitly jump to it.

Let's remove them for better readability.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200328060520.31449-4-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:08 -07:00
Wei Yang f4eaf51a72 mm/swapfile.c: explicitly show ssd/non-ssd is handled mutually exclusive
The code shows if this is ssd, it will jump to specific tag and skip the
following code for non-ssd.

Let's use "else if" to explicitly show the mutually exclusion for
ssd/non-ssd to reduce ambiguity.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200328060520.31449-3-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:08 -07:00
Wei Yang ca2c55a737 mm/swapfile.c: offset is only used when there is more slots
scan_swap_map_slots() is used to iterate swap_map[] array for an
available swap entry.  While after several optimizations, e.g.  for ssd
case, the logic of this function is a little not easy to catch.

This patchset tries to clean up the logic a little:

  * shows the ssd/non-ssd case is handled mutually exclusively
  * remove some unnecessary goto for ssd case

This patch (of 3):

When si->cluster_nr is zero, function would reach done and return.  The
increased offset would not be used any more.  This means we can move the
offset increment into the if clause.

This brings a further code cleanup possibility.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200328060520.31449-1-richard.weiyang@gmail.com
Link: http://lkml.kernel.org/r/20200328060520.31449-2-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:08 -07:00
Andrea Righi ebc5951eea mm: swap: properly update readahead statistics in unuse_pte_range()
In unuse_pte_range() we blindly swap-in pages without checking if the
swap entry is already present in the swap cache.

By doing this, the hit/miss ratio used by the swap readahead heuristic
is not properly updated and this leads to non-optimal performance during
swapoff.

Tracing the distribution of the readahead size returned by the swap
readahead heuristic during swapoff shows that a small readahead size is
used most of the time as if we had only misses (this happens both with
cluster and vma readahead), for example:

r::swapin_nr_pages(unsigned long offset):unsigned long:$retval
        COUNT      EVENT
        36948      $retval = 8
        44151      $retval = 4
        49290      $retval = 1
        527771     $retval = 2

Checking if the swap entry is present in the swap cache, instead, allows
to properly update the readahead statistics and the heuristic behaves in a
better way during swapoff, selecting a bigger readahead size:

r::swapin_nr_pages(unsigned long offset):unsigned long:$retval
        COUNT      EVENT
        1618       $retval = 1
        4960       $retval = 2
        41315      $retval = 4
        103521     $retval = 8

In terms of swapoff performance the result is the following:

Testing environment
===================

 - Host:
   CPU: 1.8GHz Intel Core i7-8565U (quad-core, 8MB cache)
   HDD: PC401 NVMe SK hynix 512GB
   MEM: 16GB

 - Guest (kvm):
   8GB of RAM
   virtio block driver
   16GB swap file on ext4 (/swapfile)

Test case
=========
 - allocate 85% of memory
 - `systemctl hibernate` to force all the pages to be swapped-out to the
   swap file
 - resume the system
 - measure the time that swapoff takes to complete:
   # /usr/bin/time swapoff /swapfile

Result (swapoff time)
======
                  5.6 vanilla   5.6 w/ this patch
                  -----------   -----------------
cluster-readahead      22.09s              12.19s
    vma-readahead      18.20s              15.33s

Conclusion
==========

The specific use case this patch is addressing is to improve swapoff
performance in cloud environments when a VM has been hibernated, resumed
and all the memory needs to be forced back to RAM by disabling swap.

This change allows to better exploits the advantages of the readahead
heuristic during swapoff and this improvement allows to to speed up the
resume process of such VMs.

[andrea.righi@canonical.com: update changelog]
  Link: http://lkml.kernel.org/r/20200418084705.GA147642@xps-13
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Anchal Agarwal <anchalag@amazon.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vineeth Remanan Pillai <vpillai@digitalocean.com>
Cc: Kelley Nielsen <kelleynnn@gmail.com>
Link: http://lkml.kernel.org/r/20200416180132.GB3352@xps-13
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:08 -07:00