[ Upstream commit 0983834a83 ]
Ethernet phy VSC8541-01 on HiFive Unleashed has its reset line
connected to a gpio, so enable GPIO driver's required to reset
the phy.
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be969b7cfb ]
HiFive unleashed A00 board has VSC8541-01 ethernet phy, this device is
identified as a Revision B device as described in device identification
registers. In order to use this phy in the unmanaged mode, it requires
a specific reset sequence of logical 0-1-0-1 transition on the NRESET pin
as documented here [1].
Currently, the bootloader (fsbl or u-boot-spl) takes care of the phy reset.
If due to some reason the phy device hasn't received the reset by the prior
stages before the linux macb driver comes into the picture, the MACB mii
bus gets probed but the mdio scan fails and is not even able to read the
phy ID registers. It gives an error message:
"libphy: MACB_mii_bus: probed
mdio_bus 10090000.ethernet-ffffffff: MDIO device at address 0 is missing."
Thus adding the device OUI (Organizationally Unique Identifier) to the phy
device node helps to probe the phy device.
[1]: VSC8541-01 datasheet:
https://www.mouser.com/ds/2/523/Microsemi_VSC8541-01_Datasheet_10496_V40-1148034.pdf
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11f4c2e940 ]
If of_clk_init() is not called in time_init(), clock providers defined
in the system device tree are not initialized, resulting in failures for
other devices to initialize due to missing clocks.
Similarly to other architectures and to the default kernel time_init()
implementation, call of_clk_init() before executing timer_probe() in
time_init().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cef3970381 ]
Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = a27bd01c
[00000000] *pgd=236a0003, *pmd=1ffa64003
Internal error: Oops: 207 [#1] SMP ARM
Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
Hardware name: BCM2711
PC is at zs_map_object+0x94/0x338
LR is at zram_bvec_rw.constprop.0+0x330/0xa64
pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013
sp : e376bbe0 ip : 00000000 fp : c1e2921c
r10: 00000002 r9 : c1dda730 r8 : 00000000
r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000
r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 30c5383d Table: 235c2a80 DAC: fffffffd
Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
Stack: (0xe376bbe0 to 0xe376c000)
As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.
The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.
After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.
I looked up the possible number of bits in source code and
datasheets, here is what I found:
- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
support more than 32 bits, even though supersections in theory allow
up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
XPA supports up to 60 bits in theory, but 40 bits are more than
anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit
addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit
addressing. There is no highmem support on RISC-V, so anything
above 2GB is unused, but it might be useful to eventually support
CONFIG_ZRAM for high pages.
Fixes: 61989a80fb ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a9 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79605f1394 ]
M-Mode Linux is loaded at the start of RAM, not 2MB later. Perhaps this
should be calculated based on PAGE_OFFSET somehow? Even better would be to
deprecate text_offset and instead introduce something absolute.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5fca7c55f ]
AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for RISC-V at all even though ARCH_DLINFO will contain one NEW_AUX_ENT
for the VDSO address.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66d18dbda8 ]
Without this we get lockdep failures. They're spurious failures as SMP isn't
up when ftrace_init_nop() is called. As far as I can tell the easiest fix is
to just take the lock, which also seems like the safest fix.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21190b74bc ]
This invalidates local TLB after modifying the page tables during early init as
it's too early to handle suprious faults as we otherwise do.
Fixes: f2c17aabc9 ("RISC-V: Implement compile-time fixed mappings")
Reported-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: Cleaned up the commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0d8aae645 ]
Currently, maximum number of mapper pages are set to the pfn calculated
from the memblock size of the memblock containing kernel. This will work
until that memblock spans the entire memory. However, it will be set to
a wrong value if there are multiple memblocks defined in kernel
(e.g. with efi runtime services).
Set the the maximum value to the pfn calculated from dram size.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38b7c2a3ff ]
While digging through the recent mmiowb preemption issue it came up that
we aren't actually preventing IO from crossing a scheduling boundary.
While it's a bit ugly to overload smp_mb__after_spinlock() with this
behavior, it's what PowerPC is doing so there's some precedent.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0cac21b02b upstream.
With the current 8KB stack size there are frequent overflows in a 64-bit
configuration. We may split IRQ stacks off in the future, but this fixes a
number of issues right now.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: mention irqstack in the commit text]
Fixes: 7db91e57a0 ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e0d17c842c ]
As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the
RISC-V instruction set manual[0], the PTE permission bit combination of
"write+exec only" is reserved for future use. Hence, don't allow such
mapping request in mmap call.
An issue is been reported by David Abdurachmanov, that while running
stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V
specific kernel.
This issue arises when the stress-sysbadaddr request for pages with
"write+exec only" permission bits and then passes the address obtain
from this mmap call to various system call. For the riscv kernel, the
mmap call should fail for this particular combination of permission bits
since it's not valid.
[0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdf
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
[Palmer: Refer to the latest ISA specification at the only link I could
find, and update the terminology.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c58f25e69 ]
The argument passed to cmpxchg is not guaranteed to be sign
extended, but lr.w sign extends on RV64I. This makes cmpxchg
fail on clang built kernels when __old is negative.
To fix this, we just cast __old to long which sign extends on
RV64I. With this fix, clang built RISC-V kernels now boot.
Link: https://github.com/ClangBuiltLinux/linux/issues/867
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0502bee37c ]
Drop static declaration to fix following build error if FRAME_POINTER disabled,
riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0':
perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c1918c8f5 ]
When building with the LLVM linker this error occurrs:
LD arch/riscv/kernel/vdso/vdso-syms.o
ld.lld: error: no input files
This happens because the lld treats -R as an alias to -rpath, as opposed
to ld where -R means --just-symbols.
Use the long option name for compatibility between the two.
Link: https://github.com/ClangBuiltLinux/linux/issues/805
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a160eed4b7 ]
When looking for the memblock where the kernel lives, we should check
that the memory range associated to the memblock entirely comprises the
kernel image and not only intersects with it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa2734202a ]
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for
a nommu kernel. Since the sparsemem model does not make sense anyway
for the nommu case, do not allow selecting this option to always use
the flatmem model.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cff8bff7a ]
The compiler uses the PIC-relative method to access static variables
instead of GOT when the code model is PIC. Therefore, the limitation of
the access range from the instruction to the symbol address is +-2GB.
Under this circumstance, the kernel cannot load a kernel module if this
module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason
is that kernel relocates the .data..percpu section of the kernel module to
the end of kernel's .data..percpu. Hence, the distance between the per-CPU
symbols and the instruction will exceed the 2GB limits. To solve this
problem, the kernel should place the loaded module in the memory area
[&_end-2G, VMALLOC_END].
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Suggested-by: Alexandre Ghiti <alex@ghiti.fr>
Suggested-by: Anup Patel <anup@brainfault.org>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Carlos de Paula <me@carlosedp.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f1003b787c upstream.
The BPF JIT incorrectly clobbered the a0 register, and did not flag
usage of s5 register when BPF stack was being used.
Fixes: 2353ecc6f9 ("bpf, riscv: add BPF JIT for RV64G")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216091343.23260-2-bjorn.topel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95f4d9cced ]
Temporary files used in the VDSO build process linger on even after make
mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.
Delete them once they're no longer needed.
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1833e327a5 ]
This is needed by LKDTM (crash dump test module), it calls
flush_icache_range(), which on RISC-V turns into flush_icache_all(). On
other architectures, the actual implementation is exported, so follow
that precedence and export it here too.
Fixes build of CONFIG_LKDTM that fails with:
ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined!
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 20bda4ed62 upstream.
This is required for clone3 which passes the TLS value through a
struct rather than a register.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org> # 5.3.x
Link: https://lore.kernel.org/r/20200102172413.654385-6-amanieu@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 96bc4432f5 ]
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls. I tested it using the above selftest on an emulated
RISCV64.
Fixes: 2353ecc6f9 ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1d8f657982 upstream.
The condition should be logical NOT to assign the hook address to parent
address. Because the return value 0 of function_graph_enter upon
success.
Fixes: e949b6db51 (riscv/function_graph: Simplify with function_graph_enter())
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For legacy I/O BARs (non-MMIO BARs) to work correctly on RISC-V Linux,
we need to establish a reserved memory region for them, so that drivers
that wish to use the legacy I/O BARs can issue reads and writes against
a memory region that is mapped to the host PCIe controller's I/O BAR
mapping.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Rather than adding prototypes for C functions called only by assembly
code, mark them as __visible. This avoids adding prototypes that will
never be used by the callers. Resolves the following sparse warnings:
arch/riscv/kernel/irq.c:27:29: warning: symbol 'do_IRQ' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:151:6: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:165:6: warning: symbol 'do_syscall_trace_exit' was not declared. Should it be static?
arch/riscv/kernel/signal.c:295:17: warning: symbol 'do_notify_resume' was not declared. Should it be static?
arch/riscv/kernel/traps.c:92:1: warning: symbol 'do_trap_unknown' was not declared. Should it be static?
arch/riscv/kernel/traps.c:94:1: warning: symbol 'do_trap_insn_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:96:1: warning: symbol 'do_trap_insn_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:98:1: warning: symbol 'do_trap_insn_illegal' was not declared. Should it be static?
arch/riscv/kernel/traps.c💯1: warning: symbol 'do_trap_load_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:102:1: warning: symbol 'do_trap_load_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:104:1: warning: symbol 'do_trap_store_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:106:1: warning: symbol 'do_trap_store_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:108:1: warning: symbol 'do_trap_ecall_u' was not declared. Should it be static?
arch/riscv/kernel/traps.c:110:1: warning: symbol 'do_trap_ecall_s' was not declared. Should it be static?
arch/riscv/kernel/traps.c:112:1: warning: symbol 'do_trap_ecall_m' was not declared. Should it be static?
arch/riscv/kernel/traps.c:124:17: warning: symbol 'do_trap_break' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:136:24: warning: symbol 'smp_callin' was not declared. Should it be static?
Based on a suggestion from Luc Van Oostenryck.
This version includes changes based on feedback from Christoph Hellwig
<hch@lst.de>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de> # for do_syscall_trace_*
The __user annotations were removed from the {save,restore}_fp_state()
function signatures by commit 007f5c3589 ("Refactor FPU code in
signal setup/return procedures"), but should be present, and sparse
warns when they are not applied. Add them back in.
This change should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Fixes: 007f5c3589 ("Refactor FPU code in signal setup/return procedures")
Cc: Alan Kao <alankao@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
sparse identifies several missing prototypes caused by missing
preprocessor include directives:
arch/riscv/kernel/cpufeature.c:16:6: warning: symbol 'has_fpu' was not declared. Should it be static?
arch/riscv/kernel/process.c:26:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static?
arch/riscv/kernel/reset.c:15:6: warning: symbol 'pm_power_off' was not declared. Should it be static?
arch/riscv/kernel/syscall_table.c:15:6: warning: symbol 'sys_call_table' was not declared. Should it be static?
arch/riscv/kernel/traps.c:149:13: warning: symbol 'trap_init' was not declared. Should it be static?
arch/riscv/kernel/vdso.c:54:5: warning: symbol 'arch_setup_additional_pages' was not declared. Should it be static?
arch/riscv/kernel/smp.c:64:6: warning: symbol 'arch_match_cpu_phys_id' was not declared. Should it be static?
arch/riscv/kernel/module-sections.c:89:5: warning: symbol 'module_frob_arch_sections' was not declared. Should it be static?
arch/riscv/mm/context.c:42:6: warning: symbol 'switch_mm' was not declared. Should it be static?
Fix by including the appropriate header files in the appropriate
source files.
This patch should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Several functions and arrays which are only used in the files in which
they are declared are missing "static" qualifiers. Warnings for these
symbols are reported by sparse:
arch/riscv/kernel/vdso.c:28:18: warning: symbol 'vdso_data' was not declared. Should it be static?
arch/riscv/mm/sifive_l2_cache.c:145:12: warning: symbol 'sifive_l2_init' was not declared. Should it be static?
Resolve these warnings by marking them as static.
This version incorporates feedback from Greentime Hu
<greentime.hu@sifive.com>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Greentime Hu <greentime.hu@sifive.com>
sparse complains loudly when string literals associated with
preprocessor directives are split into multiple, separately quoted
strings across different lines:
arch/riscv/mm/init.c:341:9: error: Expected ; at the end of type declaration
arch/riscv/mm/init.c:341:9: error: got "not use absolute addressing."
arch/riscv/mm/init.c:358:9: error: Trying to use reserved word 'do' as identifier
arch/riscv/mm/init.c:358:9: error: Expected ; at end of declaration
[ ... ]
It turns out this doesn't compile. The existing Linux practice for
this situation is simply to use a single long line. So, fix by
concatenating the strings.
This patch should have no functional impact.
This version incorporates changes based on feedback from Luc Van
Oostenryck <luc.vanoostenryck@gmail.com>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-riscv/CAAhSdy2nX2LwEEAZuMtW_ByGTkHO6KaUEvVxRnba_ENEjmFayQ@mail.gmail.com/T/#mc1a58bc864f71278123d19a7abc083a9c8e37033
Fixes: 387181dcdb ("RISC-V: Always compile mm/init.c with cmodel=medany and notrace")
Cc: Anup Patel <anup.patel@wdc.com>
Add prototypes for assembly language functions defined in head.S,
and include these prototypes into C source files that call those
functions.
This patch resolves the following warnings from sparse:
arch/riscv/kernel/setup.c:39:10: warning: symbol 'hart_lottery' was not declared. Should it be static?
arch/riscv/kernel/setup.c:42:13: warning: symbol 'parse_dtb' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:33:6: warning: symbol '__cpu_up_stack_pointer' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:34:6: warning: symbol '__cpu_up_task_pointer' was not declared. Should it be static?
arch/riscv/mm/fault.c:25:17: warning: symbol 'do_page_fault' was not declared. Should it be static?
This change should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
If we always compile the get_break_insn_length inline function we can
remove the ifdefs and let dead code elimination take care of the warn
branch that is now unreadable because the report_bug stub always
returns BUG_TRAP_TYPE_BUG.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Remove various not required ifdefs and externs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Using CONFIG_SPARSEMEM_VMEMMAP instead of CONFIG_SPARSEMEM to fix
following build issue.
riscv64-linux-ld: arch/riscv/mm/init.o: in function 'vmemmap_populate':
init.c:(.meminit.text+0x8): undefined reference to 'vmemmap_populate_basepages'
Cc: Logan Gunthorpe <logang@deltatee.com>
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
With CONFIG_SPARSEMEM and !CONFIG_SPARSEMEM_VMEMMAP,
arch/riscv/include/asm/pgtable.h: In function ‘mk_pte’:
include/asm-generic/memory_model.h:64:14: error: implicit declaration of function ‘page_to_section’; did you mean ‘present_section’? [-Werror=implicit-function-declaration]
int __sec = page_to_section(__pg); \
^~~~~~~~~~~~~~~
Fixed by changing mk_pte() from inline function to macro.
Cc: Logan Gunthorpe <logang@deltatee.com>
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[paul.walmsley@sifive.com: fixed checkpatch errors]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Failed to compile Fedora/RISCV kernel (5.4-rc3+) with sparsemem enabled:
fs/proc/kcore.c: In function 'read_kcore':
fs/proc/kcore.c:510:8: error: implicit declaration of function 'kern_addr_valid'; did you mean 'virt_addr_valid'? [-Werror=implicit-function-declaration]
510 | if (kern_addr_valid(start)) {
| ^~~~~~~~~~~~~~~
| virt_addr_valid
Looking at other architectures I don't see kern_addr_valid being guarded by
CONFIG_FLATMEM.
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Tested-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch fixes the virtual address layout in pgtable.h. The virtual
address of FIXADDR_START and VMEMMAP_START should not be overlapped.
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: fixed patch description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Remove a confusing comment on our local_flush_tlb_all()
implementation. Per an internal discussion with Andrew, while it's
true that the fence.i is not necessary, it's not the case that an
sfence.vma implies a fence.i. We also drop the section about
"flush[ing] the entire local TLB" to better align with the language in
section 4.2.1 "Supervisor Memory-Management Fence Instruction" of the
RISC-V Privileged Specification v20190608.
Fixes: c901e45a99 ("RISC-V: `sfence.vma` orderes the instruction cache")
Reported-by: Alan Kao <alankao@andestech.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Add a default "stdout-path" to the kernel DTS file, as is present in many
of the board DTS files elsewhere in the kernel tree. With this line
present, earlyconsole can be enabled by simply passing "earlycon" on the
kernel command line. No specific device details are necessary, since the
kernel will use the stdout-path as the default.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
For the kernel space, all ebreak instructions are determined at compile
time because the kernel space debugging module is currently unsupported.
Hence, it should be treated as a bug if an ebreak instruction which does
not belong to BUG_TRAP_TYPE_WARN or BUG_TRAP_TYPE_BUG is executed in
kernel space. For the userspace, debugging module or user problem may
intentionally insert an ebreak instruction to trigger a SIGTRAP signal.
To approach the above two situations, the do_trap_break() will direct
the BUG_TRAP_TYPE_NONE ebreak exception issued in kernel space to die()
and will send a SIGTRAP to the trapped process only when the ebreak is
in userspace.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: fixed checkpatch issue]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
On RISC-V, when the kernel runs code on behalf of a user thread, and the
kernel executes a WARN() or WARN_ON(), the user thread will be sent
a bogus SIGTRAP. Fix the RISC-V kernel code to not send a SIGTRAP when
a WARN()/WARN_ON() is executed.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: fixed subject]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
When the CONFIG_GENERIC_BUG is disabled by disabling CONFIG_BUG, if a
kernel thread is trapped by BUG(), the whole system will be in the
loop that infinitely handles the ebreak exception instead of entering the
die function. To fix this problem, the do_trap_break() will always call
the die() to deal with the break exception as the type of break is
BUG_TRAP_TYPE_BUG.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This fixes an error with how the FDT blob is reserved in memblock.
An incorrect physical address calculation exposed the FDT header to
unintended corruption, which typically manifested with of_fdt_raw_init()
faulting during late boot after fdt_totalsize() returned a wrong value.
Systems with smaller physical memory sizes more frequently trigger this
issue, as the kernel is more likely to allocate from the DMA32 zone
where bbl places the DTB after the kernel image.
Commit 671f9a3e2e ("RISC-V: Setup initial page tables in two stages")
changed the mapping of the DTB to reside in the fixmap area.
Consequently, early_init_fdt_reserve_self() cannot be used anymore in
setup_bootmem() since it relies on __pa() to derive a physical address,
which does not work with dtb_early_va that is no longer a valid kernel
logical address.
The reserved[0x1] region shows the effect of the pointer underflow
resulting from the __pa(initial_boot_params) offset subtraction:
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514
[ 0.000000] memory.cnt = 0x1
[ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0
[ 0.000000] reserved.cnt = 0x2
[ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0
[ 0.000000] reserved[0x1] [0xfffffff080100000-0xfffffff080100527], 0x0000000000000528 bytes flags: 0x0
With the fix applied:
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514
[ 0.000000] memory.cnt = 0x1
[ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0
[ 0.000000] reserved.cnt = 0x2
[ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0
[ 0.000000] reserved[0x1] [0x0000000080e00000-0x0000000080e00527], 0x0000000000000528 bytes flags: 0x0
Fixes: 671f9a3e2e ("RISC-V: Setup initial page tables in two stages")
Signed-off-by: Albert Ou <aou@eecs.berkeley.edu>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This is almost entirely a comment. The bug is unlikely to manifest on
existing hardware because there is a timeout on load reservations, but
manifests on QEMU because there is no timeout.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Some additional RISC-V updates for v5.4-rc1. This includes one
significant fix:
- Prevent interrupts from being unconditionally re-enabled during
exception handling if they were disabled in the context in which the
exception occurred
Also a few other fixes:
- Fix a build error when sparse memory support is manually enabled
- Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot
And a few minor improvements:
- DT improvements: in the FU540 SoC DT files, improve U-Boot
compatibility by adding an "ethernet0" alias, drop an unnecessary
property from the DT files, and add support for the PWM device
- KVM preparation: add a KVM-related macro for future RISC-V KVM
support, and export some symbols required to build KVM support as
modules
- defconfig additions: build more drivers by default for QEMU
configurations
-----BEGIN PGP SIGNATURE-----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=wfz5
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
"Some additional RISC-V updates.
This includes one significant fix:
- Prevent interrupts from being unconditionally re-enabled during
exception handling if they were disabled in the context in which
the exception occurred
Also a few other fixes:
- Fix a build error when sparse memory support is manually enabled
- Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot
And a few minor improvements:
- DT improvements: in the FU540 SoC DT files, improve U-Boot
compatibility by adding an "ethernet0" alias, drop an unnecessary
property from the DT files, and add support for the PWM device
- KVM preparation: add a KVM-related macro for future RISC-V KVM
support, and export some symbols required to build KVM support as
modules
- defconfig additions: build more drivers by default for QEMU
configurations"
* tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Avoid interrupts being erroneously enabled in handle_exception()
riscv: dts: sifive: Drop "clock-frequency" property of cpu nodes
riscv: dts: sifive: Add ethernet0 to the aliases node
RISC-V: Export kernel symbols for kvm
KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface
arch/riscv: disable excess harts before picking main boot hart
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig
RISC-V: Fix building error when CONFIG_SPARSEMEM_MANUAL=y
riscv: dts: Add DT support for SiFive FU540 PWM driver
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.
To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().
These changes were generated with the following shell script:
----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----
... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.
There should be no functional change as a result of this patch.
Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sagar Shrikant Kadam