[ Upstream commit 01e99aeca3 ]
For some reason, device may be in one situation which can't handle
FS request, so STS_RESOURCE is always returned and the FS request
will be added to hctx->dispatch. However passthrough request may
be required at that time for fixing the problem. If passthrough
request is added to scheduler queue, there isn't any chance for
blk-mq to dispatch it given we prioritize requests in hctx->dispatch.
Then the FS IO request may never be completed, and IO hang is caused.
So passthrough request has to be added to hctx->dispatch directly
for fixing the IO hang.
Fix this issue by inserting passthrough request into hctx->dispatch
directly together withing adding FS request to the tail of
hctx->dispatch in blk_mq_dispatch_rq_list(). Actually we add FS request
to tail of hctx->dispatch at default, see blk_mq_request_bypass_insert().
Then it becomes consistent with original legacy IO request
path, in which passthrough request is always added to q->queue_head.
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Simultaneously writing to a sequential zone of a zoned block device
from multiple contexts requires mutual exclusion for BIO issuing to
ensure that writes happen sequentially. However, even for a well
behaved user correctly implementing such synchronization, BIO plugging
may interfere and result in BIOs from the different contextx to be
reordered if plugging is done outside of the mutual exclusion section,
e.g. the plug was started by a function higher in the call chain than
the function issuing BIOs.
Context A Context B
| blk_start_plug()
| ...
| seq_write_zone()
| mutex_lock(zone)
| bio-0->bi_iter.bi_sector = zone->wp
| zone->wp += bio_sectors(bio-0)
| submit_bio(bio-0)
| bio-1->bi_iter.bi_sector = zone->wp
| zone->wp += bio_sectors(bio-1)
| submit_bio(bio-1)
| mutex_unlock(zone)
| return
| -----------------------> | seq_write_zone()
| mutex_lock(zone)
| bio-2->bi_iter.bi_sector = zone->wp
| zone->wp += bio_sectors(bio-2)
| submit_bio(bio-2)
| mutex_unlock(zone)
| <------------------------- |
| blk_finish_plug()
In the above example, despite the mutex synchronization ensuring the
correct BIO issuing order 0, 1, 2, context A BIOs 0 and 1 end up being
issued after BIO 2 of context B, when the plug is released with
blk_finish_plug().
While this problem can be addressed using the blk_flush_plug_list()
function (in the above example, the call must be inserted before the
zone mutex lock is released), a simple generic solution in the block
layer avoid this additional code in all zoned block device user code.
The simple generic solution implemented with this patch is to introduce
the internal helper function blk_mq_plug() to access the current
context plug on BIO submission. This helper returns the current plug
only if the target device is not a zoned block device or if the BIO to
be plugged is not a write operation. Otherwise, the caller context plug
is ignored and NULL returned, resulting is all writes to zoned block
device to never be plugged.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No code that occurs between blk_mq_get_ctx() and blk_mq_put_ctx() depends
on preemption being disabled for its correctness. Since removing the CPU
preemption calls does not measurably affect performance, simplify the
blk-mq code by removing the blk_mq_put_ctx() function and also by not
disabling preemption in blk_mq_get_ctx().
Cc: Hannes Reinecke <hare@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Once blk_cleanup_queue() returns, tags shouldn't be used any more,
because blk_mq_free_tag_set() may be called. Commit 45a9c9d909
("blk-mq: Fix a use-after-free") fixes this issue exactly.
However, that commit introduces another issue. Before 45a9c9d909,
we are allowed to run queue during cleaning up queue if the queue's
kobj refcount is held. After that commit, queue can't be run during
queue cleaning up, otherwise oops can be triggered easily because
some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue().
We have invented ways for addressing this kind of issue before, such as:
8dc765d438 ("SCSI: fix queue cleanup race before queue initialization is done")
c2856ae2f3 ("blk-mq: quiesce queue before freeing queue")
But still can't cover all cases, recently James reports another such
kind of issue:
https://marc.info/?l=linux-scsi&m=155389088124782&w=2
This issue can be quite hard to address by previous way, given
scsi_run_queue() may run requeues for other LUNs.
Fixes the above issue by freeing hctx's resources in its release handler, and this
way is safe becasue tags isn't needed for freeing such hctx resource.
This approach follows typical design pattern wrt. kobject's release handler.
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reported-by: James Smart <james.smart@broadcom.com>
Fixes: 45a9c9d909 ("blk-mq: Fix a use-after-free")
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_try_issue_directly() can return BLK_STS*_RESOURCE for requests that
have been queued. If that happens when blk_mq_try_issue_directly() is called
by the dm-mpath driver then dm-mpath will try to resubmit a request that is
already queued and a kernel crash follows. Since it is nontrivial to fix
blk_mq_request_issue_directly(), revert the blk_mq_request_issue_directly()
changes that went into kernel v5.0.
This patch reverts the following commits:
* d6a51a97c0 ("blk-mq: replace and kill blk_mq_request_issue_directly") # v5.0.
* 5b7a6f128a ("blk-mq: issue directly with bypass 'false' in blk_mq_sched_insert_requests") # v5.0.
* 7f556a44e6 ("blk-mq: refactor the code of issue request directly") # v5.0.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: James Smart <james.smart@broadcom.com>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: <stable@vger.kernel.org>
Reported-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Fixes: 7f556a44e6 ("blk-mq: refactor the code of issue request directly") # v5.0.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Expect arguments, blk_mq_put_driver_tag_hctx() and blk_mq_put_driver_tag()
is same. We can just use argument 'request' to put tag by blk_mq_put_driver_tag().
Then we can remove the unused blk_mq_put_driver_tag_hctx().
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function is not used outside the block layer core. Hence unexport it.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFRBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxgqNUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwsoH+OVXu0NQofwTvVru
8lgF3BSDG2mhf7mxbBBlBizGVy9jnjRNGCFMC+Jq8IwiFLwprja/G27kaDTkpuF1
PHC3yfjKvjTeUP5aNdHlmxv6j1sSJfZl0y46DQal4UeTG/Giq8TFTi+Tbz7Wb/WV
yCx4Lr8okAwTuNhnL8ojUCVIpd3c8QsyR9v6nEQ14Mj+MvEbokyTkMJV0bzOrM38
JOB+/X1XY4JPZ6o3MoXrBca3bxbAJzMneq+9CWw1U5eiIG3msg4a+Ua3++RQMDNr
8BP0yCZ6wo32S8uu0PI6HrZaBnLYi5g9Wh7Q7yc0mn1Uh1zWFykA6TtqK90agJeR
A6Ktjw==
=scY4
-----END PGP SIGNATURE-----
Merge tag 'v5.0-rc6' into for-5.1/block
Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c.
This is needed since io_uring is now based on the block branch,
to avoid a conflict between the multi-page bvecs and the bits
of io_uring that touch the core block parts.
* tag 'v5.0-rc6': (525 commits)
Linux 5.0-rc6
x86/mm: Make set_pmd_at() paravirt aware
MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
blk-mq: remove duplicated definition of blk_mq_freeze_queue
Blk-iolatency: warn on negative inflight IO counter
blk-iolatency: fix IO hang due to negative inflight counter
MAINTAINERS: unify reference to xen-devel list
x86/mm/cpa: Fix set_mce_nospec()
futex: Handle early deadlock return correctly
futex: Fix barrier comment
net: dsa: b53: Fix for failure when irq is not defined in dt
blktrace: Show requests without sector
mips: cm: reprime error cause
mips: loongson64: remove unreachable(), fix loongson_poweroff().
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
geneve: should not call rt6_lookup() when ipv6 was disabled
KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
signal: Better detection of synchronous signals
...
As the prototype has been defined in "include/linux/blk-mq.h", the one
in "block/blk-mq.h" can be removed then.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, we check whether the hctx type is supported every time
in hot path. Actually, this is not necessary, we could save the
default hctx into ctx->hctxs if the type is not supported when
map swqueues and use it directly with ctx->hctxs[type].
We also needn't check whether the poll is enabled or not, because
the caller would clear the REQ_HIPRI in that case.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, the queue mapping result is saved in a two-dimensional
array. In the hot path, to get a hctx, we need do following:
q->queue_hw_ctx[q->tag_set->map[type].mq_map[cpu]]
This isn't very efficient. We could save the queue mapping result into
ctx directly with different hctx type, like,
ctx->hctxs[type]
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a request is added to rq list of sw queue(ctx), the rq may be from
a different type of hctx, especially after multi queue mapping is
introduced.
So when dispach request from sw queue via blk_mq_flush_busy_ctxs() or
blk_mq_dequeue_from_ctx(), one request belonging to other queue type of
hctx can be dispatched to current hctx in case that read queue or poll
queue is enabled.
This patch fixes this issue by introducing per-queue-type list.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Changed by me to not use separately cacheline aligned lists, just
place them all in the same cacheline where we had just the one list
and lock before.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We should check if a given queue map actually has queues enabled before
dispatching to it. This allows drivers to not initialize optional but
not used map types, which subsequently will allow fixing problems with
queue map rebuilds for that case.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace blk_mq_request_issue_directly with blk_mq_try_issue_directly
in blk_insert_cloned_request and kill it as nobody uses it any more.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The previous patches deleted all the code that needed the second value
returned from part_in_flight - now the kernel only uses the first value.
Consequently, part_in_flight (and blk_mq_in_flight) may be changed so that
it only returns one value.
This patch just refactors the code, there's no functional change.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Having another indirect all in the fast path doesn't really help
in our post-spectre world. Also having too many queue type is just
going to create confusion, so I'd rather manage them centrally.
Note that the queue type naming and ordering changes a bit - the
first index now is the default queue for everything not explicitly
marked, the optional ones are read and poll queues.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we are issuing a list of requests, we know if we're at the last one.
If we fail issuing, ensure that we call ->commits_rqs() to flush any
potential previous requests.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even though .mq_kobj, ctx->kobj and q->kobj share same lifetime
from block layer's view, actually they don't because userspace may
grab one kobject anytime via sysfs.
This patch fixes the issue by the following approach:
1) introduce 'struct blk_mq_ctxs' for holding .mq_kobj and managing
all ctxs
2) free all allocated ctxs and the 'blk_mq_ctxs' instance in release
handler of .mq_kobj
3) grab one ref of .mq_kobj before initializing each ctx->kobj, so that
.mq_kobj is always released after all ctxs are freed.
This patch fixes kernel panic issue during booting when DEBUG_KOBJECT_RELEASE
is enabled.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We call blk_mq_map_queue() a lot, at least two times for each
request per IO, sometimes more. Since we now have an indirect
call as well in that function. cache the mapping so we don't
have to re-call blk_mq_map_queue() for the same request
multiple times.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for the tag set carrying multiple queue maps, and
for the driver to inform blk-mq how many it wishes to support
through setting set->nr_maps.
This adds an mq_ops helper for drivers that support more than 1
map, mq_ops->rq_flags_to_type(). The function takes request/bio
flags and CPU, and returns a queue map index for that. We then
use the type information in blk_mq_map_queue() to index the map
set.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mapping used to be dependent on just the CPU location, but
now it's a tuple of (type, cpu) instead. This is a prep patch
for allowing a single software queue to map to multiple hardware
queues. No functional changes in this patch.
This changes the software queue count to an unsigned short
to save a bit of space. We can still support 64K-1 CPUs,
which should be enough. Add a check to catch a wrap.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prep patch for being able to place request based not just on
CPU location, but also on the type of request.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Doesn't do anything right now, but it's needed as a prep patch
to get the interfaces right.
While in there, correct the blk_mq_map_queue() CPU type to an unsigned
int.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation for allowing multiple sets of maps per
queue, if so desired.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's just a pointer to set->mq_map, use that instead. Move the
assignment a bit earlier, so we always know it's valid.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of 'none' io scheduler, when hw queue isn't busy, it isn't
necessary to enqueue request to sw queue and dequeue it from
sw queue because request may be submitted to hw queue asap without
extra cost, meantime there shouldn't be much request in sw queue,
and we don't need to worry about effect on IO merge.
There are still some single hw queue SCSI HBAs(HPSA, megaraid_sas, ...)
which may connect high performance devices, so 'none' is often required
for obtaining good performance.
This patch improves IOPS and decreases CPU unilization on megaraid_sas,
per Kashyap's test.
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Kashyap Desai <kashyap.desai@broadcom.com>
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
set->mq_map is now currently cleared if something goes wrong when
establishing a queue map in blk-mq-pci.c. It's also cleared before
updating a queue map in blk_mq_update_queue_map().
This patch provides an API to clear set->mq_map to make it clear.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never pass 'wait' as true to blk_mq_get_driver_tag(), and hence
we never change '**hctx' as well. The last use of these went away
with the flush cleanup, commit 0c2a6fe4dc.
So cleanup the usage and remove the two extra parameters.
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch simplifies the timeout handling by relying on the request
reference counting to ensure the iterator is operating on an inflight
and truly timed out request. Since the reference counting prevents the
tag from being reallocated, the block layer no longer needs to prevent
drivers from completing their requests while the timeout handler is
operating on it: a driver completing a request is allowed to proceed to
the next state without additional syncronization with the block layer.
This also removes any need for generation sequence numbers since the
request lifetime is prevented from being reallocated as a new sequence
while timeout handling is operating on it.
To enables this a refcount is added to struct request so that request
users can be sure they're operating on the same request without it
changing while they're processing it. The request's tag won't be
released for reuse until both the timeout handler and the completion
are done with it.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: slight cleanups, added back submission side hctx lock, use cmpxchg
for completions]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the blk-mq inflight implementation was added, /proc/diskstats was
converted to use it, but /sys/block/$dev/inflight was not. Fix it by
adding another helper to count in-flight requests by data direction.
Fixes: f299b7c7a9 ("blk-mq: provide internal in-flight variant")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As it came up in discussion on the mailing list that the semantic
meaning of 'blk_mq_ctx' and 'blk_mq_hw_ctx' isn't completely
obvious to everyone, let's add some minimal kerneldoc for a
starter.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most blk-mq functions have a name that follows the pattern blk_mq_${action}.
However, the function name blk_mq_request_direct_issue is an exception.
Hence rename this function. This patch does not change any functionality.
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_insert_cloned_request() is called in the fast path of a dm-rq driver
(e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses
blk_mq_request_bypass_insert() to directly append the request to the
blk-mq hctx->dispatch_list of the underlying queue.
1) This way isn't efficient enough because the hctx spinlock is always
used.
2) With blk_insert_cloned_request(), we completely bypass underlying
queue's elevator and depend on the upper-level dm-rq driver's elevator
to schedule IO. But dm-rq currently can't get the underlying queue's
dispatch feedback at all. Without knowing whether a request was issued
or not (e.g. due to underlying queue being busy) the dm-rq elevator will
not be able to provide effective IO merging (as a side-effect of dm-rq
currently blindly destaging a request from its elevator only to requeue
it after a delay, which kills any opportunity for merging). This
obviously causes very bad sequential IO performance.
Fix this by updating blk_insert_cloned_request() to use
blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a
request to be issued directly to the underlying queue and returns the
dispatch feedback (blk_status_t). If blk_mq_request_direct_issue()
returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE
to _not_ destage the request. Whereby preserving the opportunity to
merge IO.
With this, request-based DM's blk-mq sequential IO performance is vastly
improved (as much as 3X in mpath/virtio-scsi testing).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[blk-mq.c changes heavily influenced by Ming Lei's initial solution, but
they were refactored to make them less fragile and easier to read/review]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After the recent updates to use generation number and state based
synchronization, we can easily replace REQ_ATOM_STARTED usages by
adding an extra state to distinguish completed but not yet freed
state.
Add MQ_RQ_COMPLETE and replace REQ_ATOM_STARTED usages with
blk_mq_rq_state() tests. REQ_ATOM_STARTED no longer has any users
left and is removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With issue/complete and timeout paths now using the generation number
and state based synchronization, blk_abort_request() is the only one
which depends on REQ_ATOM_COMPLETE for arbitrating completion.
There's no reason for blk_abort_request() to be a completely separate
path. This patch makes blk_abort_request() piggyback on the timeout
path instead of trying to terminate the request directly.
This removes the last dependency on REQ_ATOM_COMPLETE in blk-mq.
Note that this makes blk_abort_request() asynchronous - it initiates
abortion but the actual termination will happen after a short while,
even when the caller owns the request. AFAICS, SCSI and ATA should be
fine with that and I think mtip32xx and dasd should be safe but not
completely sure. It'd be great if people who know the drivers take a
look.
v2: - Add comment explaining the lack of synchronization around
->deadline update as requested by Bart.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi SP <asamymuthupa@micron.com>
Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, blk-mq timeout path synchronizes against the usual
issue/completion path using a complex scheme involving atomic
bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence
rules. Unfortunately, it contains quite a few holes.
There's a complex dancing around REQ_ATOM_STARTED and
REQ_ATOM_COMPLETE between issue/completion and timeout paths; however,
they don't have a synchronization point across request recycle
instances and it isn't clear what the barriers add.
blk_mq_check_expired() can easily read STARTED from N-2'th iteration,
deadline from N-1'th, blk_mark_rq_complete() against Nth instance.
In fact, it's pretty easy to make blk_mq_check_expired() terminate a
later instance of a request. If we induce 5 sec delay before
time_after_eq() test in blk_mq_check_expired(), shorten the timeout to
2s, and issue back-to-back large IOs, blk-mq starts timing out
requests spuriously pretty quickly. Nothing actually timed out. It
just made the call on a recycle instance of a request and then
terminated a later instance long after the original instance finished.
The scenario isn't theoretical either.
This patch replaces the broken synchronization mechanism with a RCU
and generation number based one.
1. Each request has a u64 generation + state value, which can be
updated only by the request owner. Whenever a request becomes
in-flight, the generation number gets bumped up too. This provides
the basis for the timeout path to distinguish different recycle
instances of the request.
Also, marking a request in-flight and setting its deadline are
protected with a seqcount so that the timeout path can fetch both
values coherently.
2. The timeout path fetches the generation, state and deadline. If
the verdict is timeout, it records the generation into a dedicated
request abortion field and does RCU wait.
3. The completion path is also protected by RCU (from the previous
patch) and checks whether the current generation number and state
match the abortion field. If so, it skips completion.
4. The timeout path, after RCU wait, scans requests again and
terminates the ones whose generation and state still match the ones
requested for abortion.
By now, the timeout path knows that either the generation number
and state changed if it lost the race or the completion will yield
to it and can safely timeout the request.
While it's more lines of code, it's conceptually simpler, doesn't
depend on direct use of subtle memory ordering or coherence, and
hopefully doesn't terminate the wrong instance.
While this change makes REQ_ATOM_COMPLETE synchronization unnecessary
between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't
removed yet as it's still used in other places. Future patches will
move all state tracking to the new mechanism and remove all bitops in
the hot paths.
Note that this patch adds a comment explaining a race condition in
BLK_EH_RESET_TIMER path. The race has always been there and this
patch doesn't change it. It's just documenting the existing race.
v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao.
- s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter.
- READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter.
v3: - Fixed possible extended seqcount / u64_stats_sync read looping
spotted by Peter.
- MQ_RQ_IDLE was incorrectly being set in complete_request instead
of free_request. Fixed.
v4: - Rebased on top of hctx_lock() refactoring patch.
- Added comment explaining the use of hctx_lock() in completion path.
v5: - Added comments requested by Bart.
- Note the addition of BLK_EH_RESET_TIMER race condition in the
commit message.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
Currently we are inconsistent in when we decide to run the queue. Using
blk_mq_run_hw_queues() we check if the hctx has pending IO before
running it, but we don't do that from the individual queue run function,
blk_mq_run_hw_queue(). This results in a lot of extra and pointless
queue runs, potentially, on flush requests and (much worse) on tag
starvation situations. This is observable just looking at top output,
with lots of kworkers active. For the !async runs, it just adds to the
CPU overhead of blk-mq.
Move the has-pending check into the run function instead of having
callers do it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Several block layer and NVMe core functions accept a combination
of BLK_MQ_REQ_* flags through the 'flags' argument but there is
no verification at compile time whether the right type of block
layer flags is passed. Make it possible for sparse to verify this.
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: linux-nvme@lists.infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need this helper to put the driver tag for flush rq, since we will
not share tag in the flush request sequence in the following patch
in case that I/O scheduler is applied.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block flush need this function without running the queue, so add a
parameter controlling whether we run it or not.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is enough to just check if we can get the budget via .get_budget().
And we don't need to deal with device state change in .get_budget().
For SCSI, one issue to be fixed is that we have to call
scsi_mq_uninit_cmd() to free allocated ressources if SCSI device fails
to handle the request. And it isn't enough to simply call
blk_mq_end_request() to do that if this request is marked as
RQF_DONTPREP.
Fixes: 0df21c86bdbf(scsi: implement .get_budget and .put_budget for blk-mq)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCSI devices use host-wide tagset, and the shared driver tag space is
often quite big. However, there is also a queue depth for each lun(
.cmd_per_lun), which is often small, for example, on both lpfc and
qla2xxx, .cmd_per_lun is just 3.
So lots of requests may stay in sw queue, and we always flush all
belonging to same hw queue and dispatch them all to driver.
Unfortunately it is easy to cause queue busy because of the small
.cmd_per_lun. Once these requests are flushed out, they have to stay in
hctx->dispatch, and no bio merge can happen on these requests, and
sequential IO performance is harmed.
This patch introduces blk_mq_dequeue_from_ctx for dequeuing a request
from a sw queue, so that we can dispatch them in scheduler's way. We can
then avoid dequeueing too many requests from sw queue, since we don't
flush ->dispatch completely.
This patch improves dispatching from sw queue by using the .get_budget
and .put_budget callbacks.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For SCSI devices, there is often a per-request-queue depth, which needs
to be respected before queuing one request.
Currently blk-mq always dequeues the request first, then calls
.queue_rq() to dispatch the request to lld. One obvious issue with this
approach is that I/O merging may not be successful, because when the
per-request-queue depth can't be respected, .queue_rq() has to return
BLK_STS_RESOURCE, and then this request has to stay in hctx->dispatch
list. This means it never gets a chance to be merged with other IO.
This patch introduces .get_budget and .put_budget callback in blk_mq_ops,
then we can try to get reserved budget first before dequeuing request.
If the budget for queueing I/O can't be satisfied, we don't need to
dequeue request at all. Hence the request can be left in the IO
scheduler queue, for more merging opportunities.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A NULL pointer crash was reported for the case of having the BFQ IO
scheduler attached to the underlying blk-mq paths of a DM multipath
device. The crash occured in blk_mq_sched_insert_request()'s call to
e->type->ops.mq.insert_requests().
Paolo Valente correctly summarized why the crash occured with:
"the call chain (dm_mq_queue_rq -> map_request -> setup_clone ->
blk_rq_prep_clone) creates a cloned request without invoking
e->type->ops.mq.prepare_request for the target elevator e. The cloned
request is therefore not initialized for the scheduler, but it is
however inserted into the scheduler by blk_mq_sched_insert_request."
All said, a request-based DM multipath device's IO scheduler should be
the only one used -- when the original requests are issued to the
underlying paths as cloned requests they are inserted directly in the
underlying dispatch queue(s) rather than through an additional elevator.
But commit bd166ef18 ("blk-mq-sched: add framework for MQ capable IO
schedulers") switched blk_insert_cloned_request() from using
blk_mq_insert_request() to blk_mq_sched_insert_request(). Which
incorrectly added elevator machinery into a call chain that isn't
supposed to have any.
To fix this introduce a blk-mq private blk_mq_request_bypass_insert()
that blk_insert_cloned_request() calls to insert the request without
involving any elevator that may be attached to the cloned request's
request_queue.
Fixes: bd166ef183 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Cc: stable@vger.kernel.org
Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't have to inc/dec some counter, since we can just
iterate the tags. That makes inc/dec a noop, but means we
have to iterate busy tags to get an in-flight count.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull irq updates from Thomas Gleixner:
"The irq department delivers:
- Expand the generic infrastructure handling the irq migration on CPU
hotplug and convert X86 over to it. (Thomas Gleixner)
Aside of consolidating code this is a preparatory change for:
- Finalizing the affinity management for multi-queue devices. The
main change here is to shut down interrupts which are affine to a
outgoing CPU and reenabling them when the CPU comes online again.
That avoids moving interrupts pointlessly around and breaking and
reestablishing affinities for no value. (Christoph Hellwig)
Note: This contains also the BLOCK-MQ and NVME changes which depend
on the rework of the irq core infrastructure. Jens acked them and
agreed that they should go with the irq changes.
- Consolidation of irq domain code (Marc Zyngier)
- State tracking consolidation in the core code (Jeffy Chen)
- Add debug infrastructure for hierarchical irq domains (Thomas
Gleixner)
- Infrastructure enhancement for managing generic interrupt chips via
devmem (Bartosz Golaszewski)
- Constification work all over the place (Tobias Klauser)
- Two new interrupt controller drivers for MVEBU (Thomas Petazzoni)
- The usual set of fixes, updates and enhancements all over the
place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
irqchip/or1k-pic: Fix interrupt acknowledgement
irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
nvme: Allocate queues for all possible CPUs
blk-mq: Create hctx for each present CPU
blk-mq: Include all present CPUs in the default queue mapping
genirq: Avoid unnecessary low level irq function calls
genirq: Set irq masked state when initializing irq_desc
genirq/timings: Add infrastructure for estimating the next interrupt arrival time
genirq/timings: Add infrastructure to track the interrupt timings
genirq/debugfs: Remove pointless NULL pointer check
irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
irqchip/gic-v3-its: Add ACPI NUMA node mapping
irqchip/gic-v3-its-platform-msi: Make of_device_ids const
irqchip/gic-v3-its: Make of_device_ids const
irqchip/irq-mvebu-icu: Add new driver for Marvell ICU
irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP
dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU
genirq/irqdomain: Remove auto-recursive hierarchy support
irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access
...
Currently we only create hctx for online CPUs, which can lead to a lot
of churn due to frequent soft offline / online operations. Instead
allocate one for each present CPU to avoid this and dramatically simplify
the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-block@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Link: http://lkml.kernel.org/r/20170626102058.10200-3-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move most code into blk_mq_rq_ctx_init, and the rest into
blk_mq_get_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei