This call matches clocks which have been marked as critical in DT
and sets the appropriate flag. These flags can then be used to
mark the clock core flags appropriately prior to registration.
Legacy bindings requiring this feature must add the clock-critical
property to their binding descriptions, as it is not a part of
common-clock binding.
Cc: devicetree@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-4-git-send-email-mturquette@baylibre.com
Critical clocks are those which must not be gated, else undefined
or catastrophic failure would occur. Here we have chosen to
ensure the prepare/enable counts are correctly incremented, so as
not to confuse users with enabled clocks with no visible users.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1455225554-13267-2-git-send-email-mturquette@baylibre.com
Russell King recently pointed out a bug in the clk-gpio code
where it fails to register the clk if of_clk_get_parent_count()
returns an error because the "clocks" property isn't present in
the DT node. If we're trying to count parents from DT we'd like
to know the count, not if there is a "clocks" property or not.
Furthermore, some drivers are assigning the return value to their
clk_init_data::num_parents member which is unsigned, leading to
potentially large numbers of parents when the property isn't
present.
Let's change the API to return an unsigned int instead of an int.
All the callers just want to know the count anyway, and this
avoids the bug that was in the clk-gpio driver.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
of_clk_init() uses for_each_matching_node_and_match() to find clock
providers, which returns all matching device nodes, whether they are
enabled or not. Hence clock providers that are disabled explicitly in DT
using e.g.
"status = "disabled";
are still activated.
Add a check to ignore device nodes that are not enabled, like
of_irq_init() does.
Reported-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Let's compare the degrees from clk_set_rate with
clk->core->phase. If the requested degrees is already
there, skip the following steps.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[sboyd@codeaurora.org: s/drgrees/degrees/ in commit text]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
__clk_init() was renamed to __clk_core_init() but these comments
weren't updated.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This reverts commit 858d588156.
Joachim reports that this commit breaks lpc18xx boot. This is
because the hardware has circular clk topology where PLLs can
feed into dividers and the same dividers can feed into the PLLs.
The hardware is designed this way so that you can choose to put
the divider before the PLL or after the PLL depending on what you
configure to be the parent of the divider and what you configure
to be the parent of the PLL.
So let's drop this patch for now because we have hardware that
actually has loops. A future patch could check for circular
parents when we change parents and fail the switch, but that's
probably best left to some debugging Kconfig option so that we
don't suffer the sanity checking cost all the time.
Reported-by: Joachim Eastwood <manabian@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Export symbol of_clk_get_from_provider so it can be used in
loadable kernel modules
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Before commit b3d192d5121f ("clk: simplify __clk_init_parent()"),
__clk_init_parent() called .get_parent() only for multi-parent
clocks. That commit changed the behavior to call .get_parent()
if available even for single-parent clocks and root clocks.
It turned out a problem because there are some single-parent clocks
that implement .get_parent() callback and return non-zero index.
The SOCFPGA clock is the case; the commit broke the SOCFPGA boards.
To keep the original behavior, invoke .get_parent() only when
num_parents is greater than 1.
Fixes: b3d192d5121f ("clk: simplify __clk_init_parent()")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We don't use CLK_IS_ROOT but in a few places in the common clk
framework core. Let's replace those checks with a check for the
number of parents a clk has instead of the flag, freeing up one
flag for something else. We don't remove the flag yet so that
things keep building, but we'll remove it once all drivers have
removed their flag usage.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
If clock is already unregistered, it returns with holding lock.
It needs to be unlocked.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
[sboyd@codeaurora.org: Use goto instead]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
If clk_fetch_parent_index() fails, p_rate is unused. Move the
assignment after the error checking.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The clk_core_get_parent_by_index can be used as a helper function
to simplify the implementation of clk_fetch_parent_index().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
If parent is given with NULL, clk_fetch_parent_index() could return
a positive index value.
Currently, parent is checked by the callers of this function, but
it would be safer to do it in this function.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This loop can be much simpler. If a new parent is available for
orphan clocks, __clk_init_parent(orphan) can detect it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Currently, clk_register() never checks a circular parent looping,
but clock providers could register such an insane clock topology.
For example, "clk_a" could have "clk_b" as a parent, and vice versa.
In this case, clk_core_reparent() creates a circular parent list
and __clk_recalc_accuracies() calls itself recursively forever.
The core infrastructure should be kind enough to bail out, showing
an appropriate error message in such a case. This helps to easily
find a bug in clock providers. (uh, I made such a silly mistake
when I was implementing my clock providers first. I was upset
because the kernel did not respond, without any error message.)
This commit adds a new helper function, __clk_is_ancestor(). It
returns true if the second argument is a possible ancestor of the
first one. If a clock core is a possible ancestor of itself, it
would make a loop when it were registered. That should be detected
as an error.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The translation from the index into clk_core is done by
clk_core_get_parent_by_index(). The if-block for num_parents == 1
case is duplicating the code in the clk_core_get_parent_by_index().
Drop the "if (num_parents == 1)" from the special case. Instead,
set the index to zero if .get_parent() is missing.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The .get_parent is mandatory for multi-parent clocks. Move the check
to __clk_core_init(), like other callback checkings.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
[sboyd@codeaurora.org: Squashed in error path handling, fix typos
in commit message]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
These three cases let clk_register() fail. They should be considered
as error messages.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The core->parents is a cache to save expensive clock parent look-ups.
It will be filled as needed later. We do not have to do it here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Drop the "if (!core->parents)" case and refactor the function a bit
because core->parents is always allocated. (Strictly speaking, it is
ZERO_SIZE_PTR if core->num_parents == 0, but such a case is omitted
by the if-conditional above.)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Currently, __clk_core_init() allows failure of the kcalloc() for the
core->parents. So, clk_fetch_parent_index() and __clk_init_parent()
also try to allocate core->parents in case it has not been allocated
yet. Scattering memory allocation here and there makes things
complicated.
Like other clk_core members, allocate core->parents in clk_register()
and let it fail in case of memory shortage. If we cannot allocate
such a small piece of memory, the system is already insane. There is
no point to postpone the memory allocation.
Also, allocate core->parents regardless of core->num_parents. We want
it even if core->num_parents == 1 because clk_fetch_parent_index()
might be called against the clk_core with a single parent.
If core->num_parents == 0, core->parents is set to ZERO_SIZE_PTR. It
is harmless because no access happens to core->parents in such a case.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Now, the clock parent is not "struct clk *", but "struct clk_core *".
Of course, the size of a pointer is always same, but strictly speaking,
sizeof(struct clk *) should be sizeof(struct clk_core *) here.
This mismatch happened when we split the structure into struct clk
and struct clk_core. For the potential possibility of future renaming,
sizeof(*core->parents) would be better.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This if-block has been here since the introduction of the common
clock framework. Now no clock drivers are statically initialized.
core->parent is always NULL at this point. Drop the redundant
check and the confusing comment.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Now this function takes clk_core as its argument. __clk_core_init()
would be more suitable for the name of this function.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The argument clk_user is used only for the clk_user->core. The rest
of this function only takes care of clk_core.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The "struct device *dev" is not used at all in this function.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some clocks need to be enabled to accept rate changes. This patch adds a
new flag CLK_SET_RATE_UNGATE that lets clk_change_rate enable the clock
before trying to change the rate and disable it again afterwards.
This of course doesn't effect clocks that are already running at that
point, as their refcount will only temporarily increase.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Currently, of_clk_get_parent_name() returns a wrong parent clock name
when "clock-indices" property exists and the target index is not
found in the property. In this case, NULL should be returned.
For example,
oscillator {
compatible = "myclocktype";
#clock-cells = <1>;
clock-indices = <1>, <3>;
clock-output-names = "clka", "clkb";
};
consumer {
compatible = "myclockconsumer";
clocks = <&oscillator 0>, <&oscillator 1>;
};
Currently, of_clk_get_parent_name(consumer_np, 0) returns "clka"
(and of_clk_get_parent_name(consumer_np, 1) also returns "clka",
this is correct). Because the "clock-indices" in the clock parent
does not contain <0>, of_clk_get_parent_name(consumer_np, 0) should
return NULL.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The word "cases" is doubled. Keep decent forms for the following
lines.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This minor refactoring does not change the function behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This if-block can be dropped because the of_parse_phandle_with_args()
in the following line returns -EINVAL for negative index.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add clk_hw_is_enabled() to the provider APIs so clk providers can
use a struct clk_hw instead of a struct clk to check if a clk is
enabled or not.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
for_each_matching_node_and_match performs an of_node_get on each iteration,
so a break out of the loop requires an of_node_put.
A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression e1,e2,e;
local idexpression np;
@@
for_each_matching_node_and_match(np, e1, e2) {
... when != of_node_put(np)
when != e = np
(
return np;
|
+ of_node_put(np);
? return ...;
)
...
}
// </smpl>
Besides the problem identified by the semantic patch, this patch adds an
of_node_get in front of saving np in a field of parent, to account for the
fact that this value will be put on going on to the next element in the
iteration, and then adds of_node_puts in the two loops where the parent
pointer can be freed.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
When calling __clk_get_name() on a const clock:
warning: passing argument 1 of '__clk_get_name' discards 'const' qualifier from pointer target type
include/linux/clk-provider.h:613:13: note: expected 'struct clk *' but argument is of type 'const struct clk *'
__clk_get_name() does not modify the passed clock, hence make it const.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
If a clock provider has #clock-cells = 1 and we call
of_clk_get_parent_name() on it we may end up returning the name
of the provider node if the provider doesn't have a
clock-output-names property. This doesn't make sense, especially
when you consider that calling of_clk_get_parent_name() on such a
node with different indices will return the same name each time.
Let's try getting the clock from the framework via of_clk_get()
instead, and only fallback to the node name if we have a provider
with #clock-cells = 0. This way, we can't hand out the same name
for different clocks when we don't actually know their names.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
There are cleary typo errors so can be removed.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
If a mux clock is initialised (by hardware or firmware) with an
invalid parent, its ->get_parent() can return an out of range
index. For example, the generic mux clock attempts to return
-EINVAL, which due to the u8 return type ends up a rather large
number. Using this index with the parent_names[] array results
in an invalid pointer and (usually) a crash in the following
strcmp().
This patch adds a check for the parent index being in range,
ignoring clocks reporting invalid values.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Tested-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
__clk_set_parent_after() actually used the second argument then we
could put this duplicate logic in there and call it with a different
order of arguments in the success vs. error paths in this function.
Cc: Mike Turquette <mturquette@linaro.org>
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Remove these APIs now that we've converted all users to the
replacement struct clk_hw based versions.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk providers shouldn't need to use the consumer APIs (clk.h).
Add provider APIs to replace the __clk_*() APIs that take a
struct clk_hw as their first argument instead of a struct clk.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
While children of orphan clocks are not carried in the orphan-list itself,
they're nevertheless orphans in their own right as they also don't have an
input-rate available. To ease tracking if a clock is an orphan or has an
orphan in its parent path introduce an orphan field into struct clk and
update it and the fields in child-clocks when a clock gets added or removed
from the orphan-list.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Alex Elder <elder@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: kernel@pengutronix.de
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Barry Song <baohua@kernel.org>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
Cc: emilio@elopez.com.ar
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Michal Simek <michal.simek@xilinx.com>
[sboyd@codeaurora.org: s/clk/core/ in new function]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The recursive spinlock implementation trips up sparse and it
complains that these functions have lock imbalances. That isn't
really true though, so add some __acquires() and __releases()
information so that sparse is quiet.
drivers/clk/clk.c:116:22: warning: context imbalance in 'clk_enable_lock' - wrong count at exit
drivers/clk/clk.c:141:9: warning: context imbalance in 'clk_enable_unlock' - unexpected unlock
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* cleanup-clk-h-includes: (62 commits)
clk: Remove clk.h from clk-provider.h
clk: h8300: Remove clk.h and clkdev.h includes
clk: at91: Include clk.h and slab.h
clk: ti: Switch clk-provider.h include to clk.h
clk: pistachio: Include clk.h
clk: ingenic: Include clk.h
clk: si570: Include clk.h
clk: moxart: Include clk.h
clk: cdce925: Include clk.h
clk: Include clk.h in clk.c
clk: zynq: Include clk.h
clk: ti: Include clk.h
clk: sunxi: Include clk.h and remove unused clkdev.h includes
clk: st: Include clk.h
clk: qcom: Include clk.h
clk: highbank: Include clk.h
clk: bcm: Include clk.h
clk: versatile: Remove clk.h and clkdev.h includes
clk: ux500: Remove clk.h and clkdev.h includes
clk: tegra: Properly include clk.h
...
clk providers are using the consumer APIs to set min/max rates on
the clock they're providing. To encourage clk providers to move
away from the consumer APIs, add a provider API to set the
min/max rate of a clock. The assumption is that this is done
before the clock can be requested via clk_get() and that the
clock rate is already within the boundaries of the min/max that's
configured.
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some determine_rate implementations are not returning an error
when they failed to adapt the rate according to the rate request.
Fix them so that they return an error instead of silently
returning 0.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.
Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.
The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This file implements the clk API and so it should include clk.h
directly instead of indirectly including it through
clk-provider.h.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The list isn't used after of_clk_init() is called, so we don't
need to keep an empty list around after init. Put the list on the
stack.
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Dan Carpenter reports that we don't check the allocation here for
failure. Add a failure check and free any previously allocated
providers from the clk_provider_list.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This contains the EMC clock driver that's been exhaustively reviewed and
tested. It also includes a change to the clock core that allows a clock
provider to perform low-level reparenting of clocks. This is required by
the EMC clock driver because the reparenting needs to be done at a very
specific point in time during the EMC frequency switch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=I0gO
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.2-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next
clk: tegra: Changes for v4.2-rc1
This contains the EMC clock driver that's been exhaustively reviewed and
tested. It also includes a change to the clock core that allows a clock
provider to perform low-level reparenting of clocks. This is required by
the EMC clock driver because the reparenting needs to be done at a very
specific point in time during the EMC frequency switch.
This flag is needed to fix the issue with wrong dividers being setup
by Common Clock Framework when using the new Exynos cpu clock support.
The issue happens because clk_core_set_rate_nolock() calls
clk_calc_new_rates(clk, rate) before both pre/post clock notifiers have
a chance to run. In case of Exynos cpu clock support pre/post clock
notifiers are registered for mout_apll clock which is a parent of armclk
cpu clock and dividers are modified in both pre and post clock notifier.
This results in wrong dividers values being later programmed by
clk_change_rate(top). To workaround the problem CLK_RECALC_NEW_RATES
flag is added and it is set for mout_apll clock later so the correct
divider values are re-calculated after both pre and post clock notifiers
had run.
For example when using "performance" governor on Exynos4210 Origen board
the cpufreq-dt driver requests to change the frequency from 1000MHz to
1200MHz and after the change state of the relevant clocks is following:
Without use of CLK_GET_RATE_NOCACHE flag:
fout_apll rate: 1200000000
fout_apll_div_2 rate: 600000000
mout_clkout_cpu rate: 600000000
div_clkout_cpu rate: 600000000
clkout_cpu rate: 600000000
mout_apll rate: 1200000000
armclk rate: 1200000000
mout_hpm rate: 1200000000
div_copy rate: 300000000
div_hpm rate: 300000000
mout_core rate: 1200000000
div_core rate: 1200000000
div_core2 rate: 1200000000
arm_clk_div_2 rate: 600000000
div_corem0 rate: 300000000
div_corem1 rate: 150000000
div_periph rate: 300000000
div_atb rate: 300000000
div_pclk_dbg rate: 150000000
sclk_apll rate: 1200000000
sclk_apll_div_2 rate: 600000000
With use of CLK_GET_RATE_NOCACHE flag:
fout_apll rate: 1200000000
fout_apll_div_2 rate: 600000000
mout_clkout_cpu rate: 600000000
div_clkout_cpu rate: 600000000
clkout_cpu rate: 600000000
mout_apll rate: 1200000000
armclk rate: 1200000000
mout_hpm rate: 1200000000
div_copy rate: 200000000
div_hpm rate: 200000000
mout_core rate: 1200000000
div_core rate: 1200000000
div_core2 rate: 1200000000
arm_clk_div_2 rate: 600000000
div_corem0 rate: 300000000
div_corem1 rate: 150000000
div_periph rate: 300000000
div_atb rate: 240000000
div_pclk_dbg rate: 120000000
sclk_apll rate: 150000000
sclk_apll_div_2 rate: 75000000
Without this change cpufreq-dt driver showed ~10 mA larger energy
consumption when compared to cpufreq-exynos one when "performance"
cpufreq governor was used on Exynos4210 SoC based Origen board.
This issue was probably meant to be workarounded by use of
CLK_GET_RATE_NOCACHE and CLK_DIVIDER_READ_ONLY clock flags in
the original Exynos cpu clock patchset (in "[PATCH v12 6/6] clk:
samsung: remove unused clock aliases and update clock flags" patch)
but usage of these flags is not sufficient to fix the issue observed.
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
The debug_node field is only used when DEBUG_FS config is selected,
so declare it only if DEBUG_FS is selected.
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Sprinkled all through the platform clock drivers are code like this to
fill the clock parent array:
for (i = 0; i < num_parents; ++i)
parent_names[i] = of_clk_get_parent_name(np, i);
The of_clk_parent_fill() will do the same as the code above, and while
at it, return the number of parents as well since the logic of the
function is to the walk the clock node to look for the parent.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
[sboyd@codeaurora.org: Fixed kernel-doc]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
drivers/clk/clk.c:2700:5: warning: symbol '__clk_get' was not declared. Should it be static?
drivers/clk/clk.c:2713:6: warning: symbol '__clk_put' was not declared. Should it be static?
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
To be used by clock implementations for switching to a new parent during
rate change.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We don't check to make sure the enable_lock is held across
enable/disable and we don't check if the prepare_lock is held
across prepare/unprepare. Add some asserts to catch any future
locking problems.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk_dump() will dump data about all clocks in JSON
format, but it misses a newline character at the
end of the JSON string. This patch adds that missing
newline character.
Signed-off-by: Felipe Balbi <balbi@ti.com>
[sboyd@codeaurora.org: Squelch checkpatch with seq_puts()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Before commit 035a61c314 ("clk: Make clk API return per-user
struct clk instances") we acquired the enable_lock in
__clk_set_parent_{before,after}() by means of calling
clk_enable(). After commit 035a61c314 we use clk_core_enable()
in place of the clk_enable(), and clk_core_enable() doesn't
acquire the enable_lock. This opens up a race condition between
clk_set_parent() and clk_enable(). Fix it.
Fixes: 035a61c314 ("clk: Make clk API return per-user struct clk instances")
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
key/value pairs in a JSON object must be separated by a comma.
After adding the properties "accuracy" and "phase" the JSON output
of /sys/kernel/debug/clk/clk_dump is invalid.
So add the missing commas to fix it.
Fixes: 5279fc402a ("clk: add clk accuracy retrieval support")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
[sboyd@codeaurora.org: Added comment in function]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The debugfs clk directory no longer expresses a clk tree. Update
the comments around that apporiately. Also drop comments about
prepare locks needing to be held as we have the proper
annotations with lockdep_assert_held().
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Move the code around so that we don't need to declare function
prototypes at the start of the file. Simplify
clk_core_is_prepared() and clk_core_is_enabled() too to make the
diff easier to read.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This condition can't ever be true because this function is static
and it's always called with a non-NULL pointer.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We don't need to print error messages when allocations fail.
We'll get a nice backtrace in such situations anyway.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
These functions are only used in one place. Let's squash them
into their respective callers to save some lines.
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
[sboyd@codeaurora.org: Redo commit text, add NULL check in
clk_enable()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
While introducing struct clk_core we tried to minimize the diff
by changing the type of 'clk' variables from struct clk to struct
clk_core without changing the names of the variables. Now that
the split is complete, the code is slightly confusing when it
mixes variables called 'clk' and variables called 'core' that are
of the same type struct clk_core. Let's be consistent and use
'core' everywhere we have a struct clk_core pointer and 'clk'
when we have a struct clk pointer.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
->determine_rate() and ->round_rate() can return the closest rate to the
requested one or an error code.
clk_calc_new_rates is assuming these functions can't return a negative
value, which leads to a undefined behavior when the clk implementation
returns such an error code.
Fix this by returning NULL in case ->determine_rate() or ->round_rate()
returned an error code.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
of_clk_get_by_clkspec() has the same function signature as
of_clk_get_from_provider()
struct clk *of_clk_get_by_clkspec(struct of_phandle_args
*clkspec)
struct clk *of_clk_get_from_provider(struct of_phandle_args
*clkspec)
except of_clk_get_by_clkspec() checks to make sure clkspec is not
NULL. Let's remove of_clk_get_by_clkspec() and replace the
callers of it (clkconf.c) with of_clk_get_from_provider().
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The child_node member of struct clk is named the same as the
child_node member of struct clk_core. Let's rename the struct
clk's member to clks_node to avoid getting confused with the
child_node member of struct clk_core and to match the name of the
list head, clks.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Alban Browaeys <alban.browaeys@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
If a driver calls clk_set_parent(clk, parent) and parent is the
current parent of clk we shouldn't fail in any case.
Unfortunately if clk is a read-only mux we return -ENOSYS
because we think we can't change the parent, except for in this
special case where we don't actually need to change the parent at
all. Return 0 in such a situation.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
It's useful to have tracepoints around operations that change the
hardware state so that we can debug clock hardware performance
and operations. Four basic types of events are supported: on/off
events for enable, disable, prepare, unprepare that only record
an event and a clock name, rate changing events for
clk_set_{min_,max_}rate{_range}(), phase changing events for
clk_set_phase() and parent changing events for clk_set_parent().
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
If a clock's clk_ops doesn't have the set_phase op set we should
return an error from clk_set_phase(). This way clock consumers
know that when they tried to set a phase it didn't work, as
opposed to the current behavior where the return value is 0
meaning success.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Add lockdep asserts for holding the prepare_lock to all functions
marking this as a requirement in description. Add this to private and
exported functions so all locking misuse could be detected during
debugging.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Some drivers compare struct clk pointers as a means of knowing
if the two pointers reference the same clock hardware. This behavior is
dubious (drivers must not dereference struct clk), but did not cause any
regressions until the per-user struct clk patch was merged. Now the test
for matching clk's will always fail with per-user struct clk's.
clk_is_match is introduced to fix the regression and prevent drivers
from comparing the pointers manually.
Fixes: 035a61c314 ("clk: Make clk API return per-user struct clk instances")
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[arnd@arndb.de: Fix COMMON_CLK=N && HAS_CLK=Y config]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[sboyd@codeaurora.org: const arguments to clk_is_match() and
remove unnecessary ternary operation]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
type T;
identifier f;
@@
static T f (...) { ... }
@@
identifier r.f;
declarer name EXPORT_SYMBOL_GPL;
@@
-EXPORT_SYMBOL_GPL(f);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Fixes: 035a61c314 "clk: Make clk API return per-user struct clk instances"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
devices. Additionaly the framework core underwent a bit of surgery with
two major changes. The boundary between the clock core and clock
providers (e.g clock drivers) is now more well defined with dedicated
provider helper functions. struct clk no longer maps 1:1 with the
hardware clock but is a true per-user cookie which helps us tracker
users of hardware clocks and debug bad behavior. The second major change
is the addition of rate constraints for clocks. Rate ranges are now
supported which are analogous to the voltage ranges in the regulator
framework. Unfortunately these changes to the core created some
breakeage. We think we fixed it all up but for this reason there are
lots of last minute commits trying to undo the damage.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zCVK
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux
Pull clock framework updates from Mike Turquette:
"The clock framework changes contain the usual driver additions,
enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based
devices.
Additionally the framework core underwent a bit of surgery with two
major changes:
- The boundary between the clock core and clock providers (e.g clock
drivers) is now more well defined with dedicated provider helper
functions. struct clk no longer maps 1:1 with the hardware clock
but is a true per-user cookie which helps us tracker users of
hardware clocks and debug bad behavior.
- The addition of rate constraints for clocks. Rate ranges are now
supported which are analogous to the voltage ranges in the
regulator framework.
Unfortunately these changes to the core created some breakeage. We
think we fixed it all up but for this reason there are lots of last
minute commits trying to undo the damage"
* tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits)
clk: Only recalculate the rate if needed
Revert "clk: mxs: Fix invalid 32-bit access to frac registers"
clk: qoriq: Add support for the platform PLL
powerpc/corenet: Enable CLK_QORIQ
clk: Replace explicit clk assignment with __clk_hw_set_clk
clk: Add __clk_hw_set_clk helper function
clk: Don't dereference parent clock if is NULL
MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr
clkdev: Always allocate a struct clk and call __clk_get() w/ CCF
clk: shmobile: div6: Avoid division by zero in .round_rate()
clk: mxs: Fix invalid 32-bit access to frac registers
clk: omap: compile legacy omap3 clocks conditionally
clkdev: Export clk_register_clkdev
clk: Add rate constraints to clocks
clk: remove clk-private.h
pci: xgene: do not use clk-private.h
arm: omap2+ remove dead clock code
clk: Make clk API return per-user struct clk instances
clk: tegra: Define PLLD_DSI and remove dsia(b)_mux
clk: tegra: Add support for the Tegra132 CAR IP block
...
We don't really need to recalculate the effective rate of a clock when a
per-user clock is removed, if the constraints of the later aren't
limiting the requested rate.
This was causing problems with clocks that never had a rate set before,
as rate_req would be zero. Though this could be considered a bug in the
implementation of those clocks, this should be checked somewhere else.
Fixes: 1c8e600440 ("clk: Add rate constraints to clocks")
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
The clock passed as an argument to clk_mux_determine_rate_flags()
has the CLK_SET_RATE_PARENT flag set but it has no parent, then a
NULL pointer will tried to be dereferenced.
This shouldn't happen since setting that flag for a clock with no
parent is a bug but the core should be robust to handle that case.
Fixes: 035a61c314 ("clk: Make clk API return per-user struct clk instances")
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Clock subsystem frequently performs duplication of strings located in
read-only memory section. Replacing kstrdup by kstrdup_const allows to
avoid such operations.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
of_clk_get_by_clkspec() returns a struct clk pointer but it
doesn't create a new handle for the consumers when we're using
the common clock framework. Instead it just returns whatever the
clk provider hands out. When the consumers go to call clk_put()
we get an Oops.
Unable to handle kernel paging request at virtual address 00200200
pgd = c0004000
[00200200] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc1-00104-ga251361a-dirty #992
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
task: ee00b000 ti: ee088000 task.ti: ee088000
PC is at __clk_put+0x24/0xd0
LR is at clk_prepare_lock+0xc/0xec
pc : [<c03eef38>] lr : [<c03ec1f4>] psr: 20000153
sp : ee089de8 ip : 00000000 fp : 00000000
r10: ee02f480 r9 : 00000001 r8 : 00000000
r7 : ee031cc0 r6 : ee089e08 r5 : 00000000 r4 : ee02f480
r3 : 00100100 r2 : 00200200 r1 : 0000091e r0 : 00000001
Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 4000404a DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xee088238)
Stack: (0xee089de8 to 0xee08a000)
9de0: ee7c8f14 c03f0ec8 ee089e08 00000000 c0718dc8 00000001
9e00: 00000000 c04ee0f0 ee7e0844 00000001 00000181 c04edb58 ee2bd320 00000000
9e20: 00000000 c011dc5c ee16a1e0 00000000 00000000 c0718dc8 ee16a1e0 ee2bd1e0
9e40: c0641740 ee16a1e0 00000000 ee2bd320 c0718dc8 ee1d3e10 ee1d3e10 00000000
9e60: c0769a88 00000000 c0718dc8 00000000 00000000 c02c3124 c02c310c ee1d3e10
9e80: c07b4eec 00000000 c0769a88 c02c1d0c ee1d3e10 c0769a88 ee1d3e44 00000000
9ea0: c07091dc c02c1eb8 00000000 c0769a88 c02c1e2c c02c0544 ee005478 ee1676c0
9ec0: c0769a88 ee3a4e80 c0760ce8 c02c150c c0669b90 c0769a88 c0746cd8 c0769a88
9ee0: c0746cd8 ee2bc4c0 c0778c00 c02c24e0 00000000 c0746cd8 c0746cd8 c07091f0
9f00: 00000000 c0008944 c04f405c 00000025 ee00b000 60000153 c074ab00 00000000
9f20: 00000000 c074ab90 60000153 00000000 ef7fca5d c050860c 000000b6 c0036b88
9f40: c065ecc4 c06bc728 00000006 00000006 c074ab30 ef7fca40 c0739bdc 00000006
9f60: c0718dbc c0778c00 000000b6 c0718dc8 c06ed598 c06edd64 00000006 00000006
9f80: c06ed598 c003b438 00000000 c04e64f4 00000000 00000000 00000000 00000000
9fa0: 00000000 c04e64fc 00000000 c000e838 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0
[<c03eef38>] (__clk_put) from [<c03f0ec8>] (of_clk_set_defaults+0xe0/0x2c0)
[<c03f0ec8>] (of_clk_set_defaults) from [<c02c3124>] (platform_drv_probe+0x18/0xa4)
[<c02c3124>] (platform_drv_probe) from [<c02c1d0c>] (driver_probe_device+0x10c/0x22c)
[<c02c1d0c>] (driver_probe_device) from [<c02c1eb8>] (__driver_attach+0x8c/0x90)
[<c02c1eb8>] (__driver_attach) from [<c02c0544>] (bus_for_each_dev+0x54/0x88)
[<c02c0544>] (bus_for_each_dev) from [<c02c150c>] (bus_add_driver+0xd4/0x1d0)
[<c02c150c>] (bus_add_driver) from [<c02c24e0>] (driver_register+0x78/0xf4)
[<c02c24e0>] (driver_register) from [<c07091f0>] (fimc_md_init+0x14/0x30)
[<c07091f0>] (fimc_md_init) from [<c0008944>] (do_one_initcall+0x80/0x1d0)
[<c0008944>] (do_one_initcall) from [<c06edd64>] (kernel_init_freeable+0x108/0x1d4)
[<c06edd64>] (kernel_init_freeable) from [<c04e64fc>] (kernel_init+0x8/0xec)
[<c04e64fc>] (kernel_init) from [<c000e838>] (ret_from_fork+0x14/0x3c)
Code: ebfff4ae e5943014 e5942018 e3530000 (e5823000)
Let's create a per-user handle here so that clk_put() can
properly unlink it and free the handle. Now that we allocate a
clk structure here we need to free it if __clk_get() fails so
bury the __clk_get() call in __of_clk_get_from_provider(). We
need to handle the same problem in clk_get_sys() so export
__clk_free_clk() to clkdev.c and do the same thing, except let's
use a union to make this code #ifdef free.
This fixes the above crash, properly calls __clk_get() when
of_clk_get_from_provider() is called, and cleans up the clk
structure on the error path of clk_get_sys().
Fixes: 035a61c314 "clk: Make clk API return per-user struct clk instances"
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Alban Browaeys <prahal@yahoo.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Adds a way for clock consumers to set maximum and minimum rates. This
can be used for thermal drivers to set minimum rates, or by misc.
drivers to set maximum rates to assure a minimum performance level.
Changes the signature of the determine_rate callback by adding the
parameters min_rate and max_rate.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[sboyd@codeaurora.org: set req_rate in __clk_init]
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: min/max rate for sun6i_ahb1_clk_determine_rate
migrated clk-private.h changes to clk.c]
Private clock framework data structures should be private, surprisingly.
Now that all platforms and drivers have been updated to remove static
initializations of struct clk and struct clk_core objects and all
references to clk-private.h have been removed we can move the
definitions of these structures into drivers/clk/clk.c and delete the
header.
Additionally the ugly DEFINE_CLK macros have been removed. Those were
used for static definitions of struct clk objects. That practice is no
longer allowed.
Finally __clk_init is staticized as it is no longer declared in any
header.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Moves clock state to struct clk_core, but takes care to change as little API as
possible.
struct clk_hw still has a pointer to a struct clk, which is the
implementation's per-user clk instance, for backwards compatibility.
The struct clk that clk_get_parent() returns isn't owned by the caller, but by
the clock implementation, so the former shouldn't call clk_put() on it.
Because some boards in mach-omap2 still register clocks statically, their clock
registration had to be updated to take into account that the clock information
is stored in struct clk_core now.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: adapted clk_has_parent to struct clk_core
applied OMAP3+ DPLL fix from Tero & Tony]
As it has never been used.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
As clk_unprepare_unused_subtree and clk_disable_unused_subtree are
always called with a valid struct clk.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
The phase setter and getter were not exported until now, which was causing
build breakages when callers were compiled as module. Export these two
functions.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Some clock drivers want to find the closest rate on the input of
a mux instead of a rate that's less than or equal to the desired
rate. Add a generic mux function to support this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Kenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Some of the clks can be registered & unregistered before the clk related debugfs
entries are initialized at late_initcall. In the unregister path checking for only
dentry before clk_debug_init() would lead dangling pointers in the debug clk list,
because the list is already populated in register path and the clk pointer freed in
unregister path.
The side effect of not removing it from the list is either a null pointer
dereference or if lucky to boot the system, the number of clk entries in
debugfs disappear.
We could add more checks like if (inited && !clk->dentry) but just removing
the check for dentry made more sense as debugfs_remove_recursive() seems to be
safe with null pointers. This will ensure that the unregistering clk would be
removed from the debug list in all the code paths.
Without this patch kernel would crash with log:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0204000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G B 3.19.0-rc3-00007-g412f9ba-dirty #840
Hardware name: Qualcomm (Flattened Device Tree)
task: ed948000 ti: ed944000 task.ti: ed944000
PC is at strlen+0xc/0x40
LR is at __create_file+0x64/0x1dc
pc : [<c04ee604>] lr : [<c049f1c4>] psr: 60000013
sp : ed945e40 ip : ed945e50 fp : ed945e4c
r10: 00000000 r9 : c1006094 r8 : 00000000
r7 : 000041ed r6 : 00000000 r5 : ed4af998 r4 : c11b5e28
r3 : 00000000 r2 : ed945e38 r1 : a0000013 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5787d Table: 8020406a DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xed944248)
Stack: (0xed945e40 to 0xed946000)
5e40: ed945e7c ed945e50 c049f1c4 c04ee604 c0fc2fa4 00000000 ecb748c0 c11c2b80
5e60: c0beec04 0000011c c0fc2fa4 00000000 ed945e94 ed945e80 c049f3e0 c049f16c
5e80: 00000000 00000000 ed945eac ed945e98 c08cbc50 c049f3c0 ecb748c0 c11c2b80
5ea0: ed945ed4 ed945eb0 c0fc3080 c08cbc30 c0beec04 c107e1d8 ecdf0600 c107e1d8
5ec0: c107e1d8 ecdf0600 ed945f54 ed945ed8 c0208ed4 c0fc2fb0 c026a784 c04ee628
5ee0: ed945f0c ed945ef0 c0f5d600 c04ee604 c0f5d5ec ef7fcc7d c0b40ecc 0000011c
5f00: ed945f54 ed945f10 c026a994 c0f5d5f8 c04ecc00 00000007 ef7fcc95 00000007
5f20: c0e90744 c0dd0884 ed945f54 c106cde0 00000007 c117f8c0 0000011c c0f5d5ec
5f40: c1006094 c100609c ed945f94 ed945f58 c0f5de34 c0208e50 00000007 00000007
5f60: c0f5d5ec be9b5ae0 00000000 c117f8c0 c0af1680 00000000 00000000 00000000
5f80: 00000000 00000000 ed945fac ed945f98 c0af169c c0f5dd2c ed944000 00000000
5fa0: 00000000 ed945fb0 c020f298 c0af168c 00000000 00000000 00000000 00000000
5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ebcc6d33 bfffca73
[<c04ee604>] (strlen) from [<c049f1c4>] (__create_file+0x64/0x1dc)
[<c049f1c4>] (__create_file) from [<c049f3e0>] (debugfs_create_dir+0x2c/0x34)
[<c049f3e0>] (debugfs_create_dir) from [<c08cbc50>] (clk_debug_create_one+0x2c/0x16c)
[<c08cbc50>] (clk_debug_create_one) from [<c0fc3080>] (clk_debug_init+0xdc/0x144)
[<c0fc3080>] (clk_debug_init) from [<c0208ed4>] (do_one_initcall+0x90/0x1e0)
[<c0208ed4>] (do_one_initcall) from [<c0f5de34>] (kernel_init_freeable+0x114/0x1e0)
[<c0f5de34>] (kernel_init_freeable) from [<c0af169c>] (kernel_init+0x1c/0xfc)
[<c0af169c>] (kernel_init) from [<c020f298>] (ret_from_fork+0x14/0x3c)
Code: c0b40ecc e1a0c00d e92dd800 e24cb004 (e5d02000)
---[ end trace b940e45b5e25c1e7 ]---
Fixes: 6314b6796e "clk: Don't hold prepare_lock across debugfs creation"
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
This new function is similar to clk_set_parent(), except that it doesn't
actually change the parent. It merely checks that the given parent clock
can be a parent for the given clock.
A situation where this is useful is to check that a particular setup is
valid before switching to it. One specific use-case for this is atomic
modesetting in the DRM framework where setting a mode is divided into a
check phase where a given configuration is validated before applying
changes to the hardware.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
We don't need to fetch the parent index for clocks if they only
have one parent. Doing this also avoid an unnecessary allocation
for the parent cache.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
The commit 646cafc6 (clk: Change clk_ops->determine_rate to
return a clk_hw as the best parent) opens a possibility for
null pointer dereference, fix this.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Commit 6314b6796e (clk: Don't hold prepare_lock across debugfs
creation, 2014-09-04) forgot to update one place where we hold
the prepare_lock while creating debugfs directories. This means
we still have the chance of a deadlock that the commit was trying
to fix. Actually fix it by moving the debugfs creation outside
the prepare_lock.
Cc: <stable@vger.kernel.org> # 3.18
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fixes: 6314b6796e "clk: Don't hold prepare_lock across debugfs creation"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: removed lockdep_assert]
This is in preparation for clock providers to not have to deal with struct clk.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
Instead of struct clk, as this should be only used by providers.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
As it's only used internally, in drivers/clk/clk.c.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
As __clk_release could call kfree on clk and then we wouldn't have a safe way
of getting the module that owns the clock.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Fixes: fcb0ee6a3d ("clk: Implement clk_unregister")
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
It's the same to the next statement, "ret = clk->parent". I think compiler will
optimize it, it's just not looking well.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
The most important part of this serie is the addition of the phase API to
handle the MMC clocks in the Allwinner SoCs.
Apart from that, the A23 gained a new mbus driver, and there's a fix for a
incorrect divider table on the APB0 clock.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZkI9
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clocks-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next
Allwinner Clocks Additions for 3.18
The most important part of this serie is the addition of the phase API to
handle the MMC clocks in the Allwinner SoCs.
Apart from that, the A23 gained a new mbus driver, and there's a fix for a
incorrect divider table on the APB0 clock.
The current phase API doesn't look into the actual hardware to get the phase
value, but will rather get it from a variable only set by the set_phase
function.
This will cause issue when the client driver will never call the set_phase
function, where we can end up having a reported phase that will not match what
the hardware has been programmed to by the bootloader or what phase is
programmed out of reset.
Add a new get_phase function for the drivers to implement so that we can get
this value.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
A common operation for a clock signal generator is to shift the phase of
that signal. This patch introduces a new function to the clk.h API to
dynamically adjust the phase of a clock signal. Additionally this patch
introduces support for the new function in the common clock framework
via the .set_phase call back in struct clk_ops.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
In some cases, clocks can switch their parent with clk_set_rate, for
example clk_mux can do this in some cases. Current implementation of
clk_change_rate uses un-safe list iteration on the clock children, which
will cause wrong clocks to be parsed in case any of the clock children
change their parents during the change rate operation. Fixed by using
the safe list iterator instead.
The problem was detected due to some divide by zero errors generated
by clock init on dra7-evm board, see discussion under
http://article.gmane.org/gmane.linux.ports.arm.kernel/349180 for details.
Fixes: 71472c0c06 ("clk: add support for clock reparent on set_rate")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
If the .debug_init op is provided, it will be called by
clk_debug_create_one(). If debug_init() returns an error code,
clk_debug_create_one() will return -ENOMEM, regardless of the
value returned from debug_init(). Tweak the code to return
the actual value returned by debug_init() instead.
Signed-off-by: Chris Brand <chris.brand@linaro.org>
Reviewed-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch adds helper functions to configure clock parents and rates
as specified through 'assigned-clock-parents', 'assigned-clock-rates'
DT properties for a clock provider or clock consumer device.
The helpers are now being called by the bus code for the platform, I2C
and SPI busses, before the driver probing and also in the clock core
after registration of a clock provider.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Define and export a new function clk_debugs_add_file which adds a file
to a existing clock's debugfs directory. This can be used by clock
providers to add debugfs entries which are not related to a specific clock
type. Examples include the ability to measure the rate of a clock. It can
also be used by modules to create new debugfs entries. This is useful if you
want to expose features for testing which can potentially cause system
instability such as allowing to change a clock's rate from userspace.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
‘all_lists’ and ‘orphan_list’ is accessed only when DEBUG_FS is defined.
Thus, make their compilation conditional to fix the below warnings introduced
by commit 27b8d5f723 ("clk: flatten clk tree in debugfs"):
drivers/clk/clk.c:40:27: warning: ‘all_lists’ defined but not used [-Wunused-variable]
drivers/clk/clk.c:46:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable]
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This patch flattens the clk tree in CCF debugfs. Instead of representing the
clocks and their hierarchy as a directory structure under
/sys/kernel/debug/clk, each clock gets a single directory directly under
/sys/kernel/debug/clk. The orphans directory is replaced by a file called
clk_orphan_summary.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Commit 99cbd064b0 ("clk: qcom: Support display RCG clocks") adds
a use of the __clk_round_rate in a clock provided that can be built
as a loadable module.
This exports the symbol to avoid the build error from compiling
the qcom clock as a module.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This simplifies error paths in drivers that use optional clocks
by allowing the NULL or error pointer to be passed
unconditionally.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The same if-else statement exists four times to recalculate the
rate of a clock. Consolidate this logic into a single function to
save some lines.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
We dereference clk->ops during clock registration so this check
for NULL ops can't possibly ever be true.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Now that clk_unregister() frees the struct clk we're
unregistering we'll free memory twice: first we'll call kfree()
in __clk_release() with an address kmalloc doesn't know about and
second we'll call kfree() in the devres layer. Remove the
allocation of struct clk in devm_clk_register() and let
clk_release() handle it. This fixes slab errors like:
=============================================================================
BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081
CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34
[<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14)
[<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc)
[<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84)
[<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c)
[<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c)
[<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140)
[<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8)
[<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0)
[<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8)
[<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4)
[<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8)
[<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48)
FIX kmalloc-128: Object at 0xed08e8d0 not freed
Fixes: fcb0ee6a3d (clk: Implement clk_unregister)
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: stable@vger.kernel.org
This restores the default clocks registration order as parsed from
devicetree, i.e. as before commit 1771b10d60
"clk: respect the clock dependencies in of_clk_init", for when there
is no explicit parent clock dependencies between clock providers
specified in the device tree.
It prevents regressions (boot failure, division by 0 errors) on
imx and exynos platforms.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add a new clk_ops->debug_init method to allow a clock hardware
driver to populate the clock's debugfs directory with entries
beyond those common for every clock.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
If a rate change failed it's the opportunity of the caller to handle
this. Do not spam the log with a message.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Until now the clock providers were initialized in the order found in
the device tree. This led to have the dependencies between the clocks
not respected: children clocks could be initialized before their
parent clocks.
Instead of forcing each platform to manage its own initialization order,
this patch adds this work inside the framework itself.
Using the data of the device tree the of_clk_init function now delayed
the initialization of a clock provider if its parent provider was not
ready yet.
The strict dependency check (all parents of a given clk must be
initialized) was added by Boris BREZILLON
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Ensure clk->kref is dereferenced only when clk is not NULL.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
At probe time, a clock device may not be ready when some other device
wants to use it.
This patch lets the functions clk_get/devm_clk_get return a probe defer
when the clock is defined in the DT but not yet available.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Both the pr_err and the additional kerneldoc aim to help when debugging
errors thrown from within a clock rate-change notifier callback.
Reported-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add a property called clock-indices to allow clock-output-names
to be used where the index used to lookup a clock is not a 1:1
mapping to the array position in the clock-output-names
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Contradicting to documenation, the notifier callbacks do receive
the original clock rate in struct clk_notifier_data.old_rate and the new
frequency struct clk_notifier_data.new_rate, independent of the
notification reason.
This behavior also seems to make more sense, since callbacks can use the
same code to deterimine whether clocks are scaled up or down. Something
which would not even possible in the post-rate-change case if the
behavior was as documented.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Allow drivers to be compiled as modules by exporting more clock
provider functions.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
ti_dt_clk_init_provider() can now be used to initialize the contents of
a single clock IP block. This parses all the clocks under the IP block
and calls the corresponding init function for them.
This patch also introduces a helper function for the TI clock drivers
to get register info from DT and append the master IP info to this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Some of Qualcomm's clocks can change their parent and rate at the
same time with a single register write. Add support for this
hardware to the common clock framework by adding a new
set_rate_and_parent() op. When the clock framework determines
that both the parent and the rate are going to change during
clk_set_rate() it will call the .set_rate_and_parent() op if
available and fall back to calling .set_parent() followed by
.set_rate() otherwise.
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Populate ${DEBUGS_MOUNT_POINT}/clk if CONFIG_DEBUG_FS is set. This
eliminates the extra (annoying) step of enabling the config option
manually.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The clock accuracy is expressed in ppb (parts per billion) and represents
the possible clock drift.
Say you have a clock (e.g. an oscillator) which provides a fixed clock of
20MHz with an accuracy of +- 20Hz. This accuracy expressed in ppb is
20Hz/20MHz = 1000 ppb (or 1 ppm).
Clock users may need the clock accuracy information in order to choose
the best clock (the one with the best accuracy) across several available
clocks.
This patch adds clk accuracy retrieval support for common clk framework by
means of a new function called clk_get_accuracy.
This function returns the given clock accuracy expressed in ppb.
In order to get the clock accuracy, this implementation adds one callback
called recalc_accuracy to the clk_ops structure.
This callback is given the parent clock accuracy (if the clock is not a
root clock) and should recalculate the given clock accuracy.
This callback is optional and may be implemented if the clock is not
a perfect clock (accuracy != 0 ppb).
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
clk_unregister() is currently not implemented and it is required when
a clock provider module needs to be unloaded.
Normally the clock supplier module is prevented to be unloaded by
taking reference on the module in clk_get().
For cases when the clock supplier module deinitializes despite the
consumers of its clocks holding a reference on the module, e.g. when
the driver is unbound through "unbind" sysfs attribute, there are
empty clock ops added. These ops are assigned temporarily to struct
clk and used until all consumers release the clock, to avoid invoking
callbacks from the module which just got removed.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch adds common __clk_get(), __clk_put() clkdev helpers that
replace their platform specific counterparts when the common clock
API is used.
The owner module pointer field is added to struct clk so a reference
to the clock supplier module can be taken by the clock consumers.
The owner module is assigned while the clock is being registered,
in functions _clk_register() and __clk_register().
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add helper functions for the of_clk_providers list locking and
an unlocked variant of of_clk_get_from_provider().
These functions are intended to be used in the clkdev to avoid
race condition in the device tree based clock look up in clk_get().
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
[Maybe the third time will be the charm. -Alex]
If CONFIG_COMMON_CLK_DEBUG is defined, clk_debug_create_one() is
called to populate a debugfs directory with a few entries that are
common for all clock types.
If an error happens after creating the first one debugfs_remove() is
called on the clock's directory. The problem with this is that no
cleanup is done on the debugfs files already created in that
directory, so the directory never actually gets removed. This
problem is silently ignored.
Fix this by calling debugfs_remove_recursive() instead. Reset the
clk->dentry field to null afterward, to ensure it can't be mistaken
as a valid pointer.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This function is supposed to iterate over all parents of given child
clock to find the index of given parent clock in its parent list,
using parent cache if possible and falling back to string compare
otherwise. However currently the logic falls back to string compare in
every iteration in which clock cache entry does not match given parent,
due to wrong check conditions.
This patch corrects the logic to continue the loop if parent cache entry
is present and does not match requested parent clock. In addition,
redundant checks for parent cache array presence are removed, because it
is always allocated in the beginning of the function.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Instead of calculating sizes of arrays manually, kcalloc() can be used
to allocate arrays of elements with defined size. This is just a cleanup
patch without any functional changes.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
There are at least two different error cases that can happen in
clk_fetch_parent_index() function:
- allocation failure,
- parent clock lookup failure,
however it returns only an u8, which is supposed to contain parent clock
index.
This patch modified the function to return full int instead allowing
positive clock indices and negative error codes to be returned. All
users of this function are adjusted as well to handle the return value
correctly.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
In __clk_init(), after a clock is mostly initialized, a scan is done
of the orphan clocks to see if the clock being registered is the
parent of any of them.
This code assumes that any clock that provides a get_parent method
actually has at least one parent, and that's not a valid assumption.
As a result, an orphan clock with no parent can return *something*
as the parent index, and that value is blindly used to dereference
the orphan's parent_names[] array (which will be ZERO_SIZE_PTR or
NULL).
Fix this by ensuring get_parent is only called for orphans with at
least one parent.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The __clk_get_flags() symbol is exported immediately following the
clk_unprepare_unused_subtree() function. This is unusual, since a symbol
export typically follows body of the function that it exports.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Commit 71472c0 (clk: add support for clock reparent on set_rate) added a
dereference of the new_parent pointer in clk_reparent(), but as detected
by smatch clk_reparent() later checks whether new_parent is NULL.
The dereference was in order to clear the new parent's new_child pointer
to avoid duplicate POST_RATE_CHANGE notifications, so clearly isn't
necessary if the new parent is NULL, so move it inside the "if
(new_parent)" block.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Currently of_clk_init() finds a matching device node while holding
the device tree spinlock. When a matching device node is found, the
lock is dropped and then re-acquired in order to get a reference
to the matching device id structure.
Acquiring the spinlock twice is unnecessary (and it opens a
vulnerable window that could conceivably lead to errors).
There already exists an interface for both finding and taking a
reference to a device id under lock, so use it.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
At some point changes to clk_set_rate and clk_set_parent introduced a
bug whereby NULL struct clk pointers were treated as an error. This is
in violation of the API in include/linux/clk.h. Reintroduce graceful
handling of NULL clk's by bailing from clk_set_rate and clk_set_parent
with return codes of zero.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Implement clk-mux remuxing if the CLK_SET_RATE_NO_REPARENT flag isn't
set. This implements determine_rate for clk-mux to propagate to each
parent and to choose the best one (like clk-divider this chooses the
parent which provides the fastest rate <= the requested rate).
The determine_rate op is implemented as a core helper function so that
it can be easily used by more complex clocks which incorporate muxes.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Add core support to allow clock implementations to select the best
parent clock when rounding a rate, e.g. the one which can provide the
closest clock rate to that requested. This is by way of adding a new
clock op, determine_rate(), which is like round_rate() but has an extra
parameter to allow the clock implementation to optionally select a
different parent clock. The core then takes care of reparenting the
clock when setting the rate.
The parent change takes place with the help of some new private data
members. struct clk::new_parent specifies a clock's new parent (NULL
indicates no change), and struct clk::new_child specifies a clock's new
child (whose new_parent member points back to it). The purpose of these
are to allow correct walking of the future tree for notifications prior
to actually reparenting any clocks, specifically to skip child clocks
who are being reparented to another clock (they will be notified via the
new parent), and to include any new child clock. These pointers are set
by clk_calc_subtree(), and the new_child pointer gets cleared when a
child is actually reparented to avoid duplicate POST_RATE_CHANGE
notifications.
Each place where round_rate() is called, determine_rate() is checked
first and called in preference. This restructures a few of the call
sites to simplify the logic into if/else blocks.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Move some parent related functions up in clk.c so they can be used by
the modifications in the following patch which enables clock reparenting
during set_rate. No other changes are made so this patch makes no
functional difference in isolation. This is separate from the following
patch primarily to ease readability of that patch.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Abstract access to the clock parent cache by defining
clk_get_parent_by_index(clk, index). This allows access to parent
clocks from clock drivers.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Mike Turquette <mturquette@linaro.org>
across several different platforms and architectures, fixes to existing
drivers, a MAINTAINERS file fix and improvements to the basic clock
types that allow them to be of use to more platforms than before. Only a
few fixes to the core framework are included with most all of the
changes landing in the various clock drivers themselves.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=SwMB
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux
Pull clock framework updates from Mike Turquette:
"The common clock framework changes for 3.11 include new clock drivers
across several different platforms and architectures, fixes to
existing drivers, a MAINTAINERS file fix and improvements to the basic
clock types that allow them to be of use to more platforms than before.
Only a few fixes to the core framework are included with most all of
the changes landing in the various clock drivers themselves."
* tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux: (55 commits)
clk: tegra: fix ifdef for tegra_periph_reset_assert inline
clk: tegra: provide tegra_periph_reset_assert alternative
clk: exynos4: Fix clock aliases for cpufreq related clocks
clk: samsung: Add MUX_FA macro to pass flag and alias
clk: add support for Rockchip gate clocks
clk: vexpress: Make the clock drivers directly available for arm64
clk: vexpress: Use full node name to identify individual clocks
clk: tegra: T114: add DFLL DVCO reset control
clk: tegra: T114: add DFLL source clocks
clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLL
clk: gate: add CLK_GATE_HIWORD_MASK
clk: divider: add CLK_DIVIDER_HIWORD_MASK flag
clk: mux: add CLK_MUX_HIWORD_MASK
clk: Always notify whole subtree when reparenting
MAINTAINERS: make drivers/clk entry match subdirs
clk: honor CLK_GET_RATE_NOCACHE in clk_set_rate
clk: use clk_get_rate() for debugfs
clk: tegra: Use override bits when needed
clk: tegra: override bits for Tegra30 PLLM
clk: tegra: override bits for Tegra114 PLLM
...
A clock's notifier count only reflects notifiers which are registered
directly for that clock. A reparent operation though affects the whole
subtree because of a potential rate change.
When issuing the pre rate change notifications only the notifier count
for the clock to be changed is considered and notifiers for subclocks
may never be called. Resulting in clocks in the subtree which have
registered notifiers, may receive a POST_- or ABORT_RATE_CHANGE
notification, without a PRE_RATE_CHANGE_NOTIFICATION.
Therefore always traverse the whole subtree when issueing pre rate
change notifications during a reparent operation.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
clk_set_rate() uses clk->rate directly. This causes problems if the clock
is marked as CLK_GET_RATE_NOCACHE. Hence call clk_get_rate() to get the
current rate.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
debugfs uses the rate field directly. However this ignores the
CLK_GET_RATE_NOCACHE flag. Call clk_get_rate() instead.
Tested-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
With deferred probing, late_initcall() is too soon to declare a clock as
unused. Wait for deferred probing to finish before declaring a clock as
unused. Since deferred probing is done in late_initcall(), do the unused
check to late_initcall_sync.
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Without this patch, the following race condition is possible.
* clk-A has two parents - clk-X and clk-Y.
* All three are disabled and clk-X is current parent.
* Thread A: clk_set_parent(clk-A, clk-Y).
* Thread A: <snip execution flow>
* Thread A: Grabs enable lock.
* Thread A: Sees enable count of clk-A is 0, so doesn't enable clk-Y.
* Thread A: Updates clk-A SW parent to clk-Y
* Thread A: Releases enable lock.
* Thread B: clk_enable(clk-A).
* Thread B: clk_enable() enables clk-Y, then enabled clk-A and returns.
clk-A is now enabled in software, but not clocking in hardware since the
hardware parent is still clk-X.
The only way to avoid race conditions between clk_set_parent() and
clk_enable/disable() is to ensure that clk_enable/disable() calls don't
require changes to hardware enable state between changes to software clock
topology and hardware clock topology.
The options to achieve the above are:
1. Grab the enable lock before changing software/hardware topology and
release it afterwards.
2. Keep the clock enabled for the duration of software/hardware topology
change so that any additional enable/disable calls don't try to change
the hardware state. Once the topology change is complete, the clock can
be put back in its original enable state.
Option (1) is not an acceptable solution since the set_parent() ops might
need to sleep.
Therefore, this patch implements option (2).
This patch doesn't violate any API semantics. clk_disable() doesn't
guarantee that the clock is actually disabled. So, no clients of a clock
can assume that a clock is disabled after their last call to clk_disable().
So, enabling the clock during a parent change is not a violation of any API
semantics.
This also has the nice side effect of simplifying the error handling code.
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed up whitespace issue]
This is primarily useful when there's a driver that doesn't claim clocks
properly, but the bootloader leaves them on. It's not expected to be used
in normal cases, but for bringup and debug it's very useful to have the
option to not gate unclaimed clocks that are still on.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed up trivial merge issue]
The common clock api provides some helpers for clk-providers but does
not export these helpers. This hinders clk-providers to be built as modules.
This patch adds __clk_get_flags() to the list of exported symbols.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Notifiers may return NOTIFY_(OK|DONE|STOP|BAD). The CCF uses an
inconsistent mix of checking against NOTIFY_STOP or NOTIFY_BAD.
This inconsistency leaves errors undetected in some cases:
clk_set_parent() calls __clk_speculate_rates(), which stops when it
hits a NOTIFIER_BAD (STOP is ignored), and passes this value back to the
caller.
clk_set_parent() compares this return value against NOTIFY_STOP only,
ignoring NOTIFY_BAD returns.
Use NOTIFY_STOP_MASK to detect a negative notifier return value and
document all four return value options.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Updating the clock tree topology must be protected with the spinlock
when doing clk_set_parent, otherwise we can not handle the migration
of the enable_count in a safe manner.
While issuing the .set_parent callback to make the clk-hw perform the
switch to the new parent, we can not hold the spinlock since it is must
be allowed to be slow path. This complicates error handling, but is still
possible to achieve.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Fixup the broken feature of allowing reparent of a clk to the
orhpan list and vice verse. When operating on a single-parent
clk, the .set_parent callback for the clk hw is optional to
implement, but for a multi-parent clk it is mandatory.
Moreover improve the errorhandling by verifying the prerequisites
before triggering clk notifiers. This will prevent unnecessary
rollback with ABORT_RATE_CHANGE.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Split __clk_reparent into three pieces, one for doing the actual
reparent for updating the clock tree topology, one for the
COMMON_CLK_DEBUG code and one for doing the rate recalculation.
This patch also makes it possible to hold the spinlock over the
update of the clock tree topology, which could not be done before
when both debugfs updates and clock rate updates was done within
the same function.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Reentrancy into the clock framework is necessary for clock operations
that result in nested calls to the clk api. A common example is a clock
that is prepared via an i2c transaction, such as a clock inside of a
discrete audio chip or a power management IC. The i2c subsystem itself
will use the clk api resulting in a deadlock:
clk_prepare(audio_clk)
i2c_transfer(..)
clk_prepare(i2c_controller_clk)
The ability to reenter the clock framework prevents this deadlock.
Other use cases exist such as allowing .set_rate callbacks to call
clk_set_parent to achieve the best rate, or to save power in certain
configurations. Yet another example is performing pinctrl operations
from a clk_ops callback. Calls into the pinctrl subsystem may call
clk_{un}prepare on an unrelated clock. Allowing for nested calls to
reenter the clock framework enables both of these use cases.
Reentrancy is implemented by two global pointers that track the owner
currently holding a global lock. One pointer tracks the owner during
sleepable, mutex-protected operations and the other one tracks the owner
during non-interruptible, spinlock-protected operations.
When the clk framework is entered we try to hold the global lock. If it
is held we compare the current task against the current owner; a match
implies a nested call and we reenter. If the values do not match then
we block on the lock until it is released.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: David Brown <davidb@codeaurora.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Create locking helpers for the global mutex and global spinlock. The
definitions of these helpers will be expanded upon in the next patch
which introduces reentrancy into the locking scheme.
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: David Brown <davidb@codeaurora.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Return type of function clk_propagate_rate_change is a pointer.
But 0 was being returned. Change it to NULL.
Silences the following warning:
drivers/clk/clk.c:977:24: warning: Using plain integer as NULL pointer
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Pankaj Jangra <jangra.pankaj9@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
An unprepare_unused callback is introduced due to the same reasons to
why the disable_unused callback was added.
During the clk_disable_unused sequence, those clk_hw that needs specific
treatment with regards to being unprepared, shall implement the
unprepare_unused callback.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The unused ungated fast clocks are already being disabled from
clk_disable_unused at late init. This patch extend this sequence
to the slow unused prepared clocks to be unprepared.
Unless the optional .is_prepared callback is implemented by a
clk_hw the clk_disable_unused sequence will not unprepare any
unused clocks, since it will fall back to use the software
prepare counter.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: fixed hlist accessors per b67bfe0d]
To reflect whether a clk_hw is prepared the clk_hw may implement
the optional is_prepared callback. If not implemented we fall back
to use the software prepare counter.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modify of_clk_init function so that it will determine which
driver to initialize based on device tree instead of each driver
registering to it.
Based on a similar patch for drivers/irqchip by Thomas Petazzoni and
drivers/clocksource by Stephen Warren.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Tested-by: Tony Prisk <linux@prisktech.co.nz>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Tested-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Josh Cartwright <josh.cartwright@ni.com>
Reviewed-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Maxime Ripard <maxime.ripard@anandra.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: merge conflict from missing CLKSRC_OF_TABLES()]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
On non-out case 'return ret;' is equivalent to 'return 0;' as the ret
variable is initialized at 0 and never changed.
Signed-off-by: Nestor Ovroy <novroy@riseup.net>
Clock information is dumped in JSON format which is easy
for machines to parse.
Each clock is represented as an object which has same name as
clock and following properties
- enable_count
- prepare_count
- rate
Output is verified using online JSON editor.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
This fixes the following error when building for arm-imx:
> ERROR: "__clk_get_name" [drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.ko] undefined!
> make[1]: *** [__modpost] Error 1
> make: *** [modules] Error 2
There are valid usecases to get the name of a clock, be it for debugging
purposes or to register a children of a clock like done in this IPU driver.
Therefore exporting __clk_get_name() and make it available for others makes
sense.
Reported-by: Peter Robinson <pbrobinson@gmail.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: removal of inline made redundant by 65800b2]
The helper functions that access the opaque struct clk should
not be marked inline since they are contained in clk.c, but expected
to be used by other compilation units. This causes compile errors
under gcc-4.7
In file included from arch/arm/mach-omap2/clockdomain.c:25:0:
arch/arm/mach-omap2/clockdomain.c: In function ‘clkdm_clk_disable’:
include/linux/clk-provider.h:338:12: error: inlining failed in call to always_inline ‘__clk_get_enable_count’: function body not available
arch/arm/mach-omap2/clockdomain.c:1001:28: error: called from here
make[1]: *** [arch/arm/mach-omap2/clockdomain.o] Error 1
make: *** [arch/arm/mach-omap2] Error 2
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: removed fixes made redundant by commit 93532c8a]
[mturquette@linaro.org: improved $SUBJECT]
Some gate clocks have special needs which must be handled during the
disable-unused clocks sequence. These needs might be driven by software
due to the fact that we're disabling a clock outside of the normal
clk_disable path and a clk's enable_count will not be accurate. On the
other hand a specific hardware programming sequence might need to be
followed for this corner case.
This change is needed for the upcoming OMAP port to the common clock
framework. Specifically, it is undesirable to treat the disable-unused
path identically to the normal clk_disable path since other software
layers are involved. In this case OMAP's clockdomain code throws WARNs
and bails early due to the clock's enable_count being set to zero. A
custom callback mitigates this problem nicely.
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
When a clock, C is initialised any orphan clocks listing C as
a possible parent are reparented to it regardless of the
parent requested by the orphan's get_parent() operation.
This means that multiplexers registered before their parents
are reparented to the first parent subsequently declared,
regardless of the selection made by the hardware registers.
For example:
static const char *sel[] = { "srcA", "srcB", "dummy", "srcC" };
child = clk_register_mux(NULL, "child", sel, ARRAY_SIZE(sel), ...);
clk_register_fixed(NULL, "dummy", ...);
clk_register_fixed(NULL, "srcA", ...);
clk_register_fixed(NULL, "srcB", ...);
clk_register_fixed(NULL, "srcC", ...);
Causes child's parent to always be "dummy".
To fix this, when an orphanned clock has a get_parent() operation,
only reparent to the clock indicated by get_parent().
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: improve $SUBJECT]
Some clock drivers can be simplified if devres takes care of
unregistering any registered clocks along error paths. Introduce
devm_clk_register() so that clock drivers get unregistration for
free along with simplified error paths.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Some of the helper functions return negative error codes if
passed a NULL clock. This can lead to confusing behavior when the
expected return value is unsigned. Fix up these accessors so that
they return unsigned values (or bool in the case of is_enabled).
This way we can't interpret NULL clocks as having valid and
interesting values.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
For those SoCs that have hundreds of clock outputs, their clock
DT bindings could reasonably define #clock-cells as 1 and require
the client device specify the index of the clock it consumes in the
cell of its "clocks" phandle.
Add a generic of_clk_src_onecell_get() function for this purpose.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
By using CLK_GET_RATE_NOCACHE flag, we tell the clk_get_rate API to
issue the hw for an updated clock rate. This can be used for a clock
which rate may be updated without a client necessary modifying it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
clk_get() returns -ENOENT on error and some careless caller might
dereference it without error checking:
In mxc_rnga_remove():
struct clk *clk = clk_get(&pdev->dev, "rng");
// ...
clk_disable(clk);
Since it's insane to audit the lots of existing and future clk users,
let's add a check in the callee to avoid kernel panic and warn about
any buggy user.
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant
Likely, this patch adds support to clk_get to allow drivers to retrieve
clock data from the device tree.
Platforms scan for clocks in DT with of_clk_init and a match table, and
the register a provider through of_clk_add_provider. The provider's
clk_src_get function will be called when a device references the
provider's OF node for a clock reference.
v6 (Rob Herring):
- Return error values instead of NULL to match clock framework
expectations
v5 (Rob Herring):
- Move from drivers/of into common clock subsystem
- Squashed "dt/clock: add a simple provider get function" and
"dt/clock: add function to get parent clock name"
- Rebase to 3.4-rc1
- Drop CONFIG_OF_CLOCK and just use CONFIG_OF
- Add missing EXPORT_SYMBOL to various functions
- s/clock-output-name/clock-output-names/
- Define that fixed-clock binding is a single output
v4 (Rob Herring):
- Rework for common clk subsystem
- Add of_clk_get_parent_name function
v3: - Clarified documentation
v2: - fixed errant ';' causing compile error
- Editorial fixes from Shawn Guo
- merged in adding lookup to clkdev
- changed property names to match established convention. After
working with the binding a bit it really made more sense to follow the
lead of 'reg', 'gpios' and 'interrupts' by making the input simply
'clocks' & 'clock-names' instead of 'clock-input-*', and to only use
clock-output* for the producer nodes. (Sorry Shawn, this will mean
you need to change some code, but it should be trivial)
- Add ability to inherit clocks from parent nodes by using an empty
'clock-ranges' property. Useful for busses. I could use some feedback
on the new property name, 'clock-ranges' doesn't feel right to me.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Shawn Guo <shawn.guo@freescale.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
caching parent clocks makes sense only when a clock has more
than one parent (mux clocks).
Avoid doing this for every other clock.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
[mturquette@linaro.org: removed extra parentheses]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
The below commit introduced a bug in __clk_set_parent()
which could cause it to *skip* the parent validation
which makes sure the parent passed to the api is a valid
one.
commit 7975059db5
Author: Rajendra Nayak <rnayak@ti.com>
Date: Wed Jun 6 14:41:31 2012 +0530
clk: Allow late cache allocation for clk->parents
This was identified by the following compiler warning..
drivers/clk/clk.c: In function '__clk_set_parent':
drivers/clk/clk.c:1083:5: warning: 'i' may be used uninitialized in this function [-Wuninitialized]
.. as reported by Marc Kleine-Budde.
There were various options discussed on how to fix this, one
being initing 'i' to clk->num_parents, but the below approach
was found to be more appropriate as it also makes the 'parent
validation' code simpler to read.
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Cc: stable@kernel.org
Lee Jones