commit da3cc91b8d upstream.
The commit 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API
TLB sync") help move the tlb_sync of unmap from v7s into the iommu
framework. It helps add a new function "mtk_iommu_iotlb_sync", But it
lacked the lock, then it will cause the variable "tlb_flush_active"
may be changed unexpectedly, we could see this warning log randomly:
mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to
full flush
The HW requires tlb_flush/tlb_sync in pairs strictly, this patch adds
a new tlb_lock for tlb operations to fix this issue.
Fixes: 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2009122f1d upstream.
Use the correct tlb_flush_all instead of the original one.
Fixes: 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the "struct mtk_smi_iommu" to simplify the code since it has only
one item in it right now.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The "mediatek,larb-id" has already been parsed in MTK IOMMU driver.
It's no need to parse it again in SMI driver. Only clean some codes.
This patch is fit for all the current mt2701, mt2712, mt7623, mt8173
and mt8183.
After this patch, the "mediatek,larb-id" only be needed for mt2712
which have 2 M4Us. In the other SoCs, we can get the larb-id from M4U
in which the larbs in the "mediatek,larbs" always are ordered.
Correspondingly, the larb_nr in the "struct mtk_smi_iommu" could also
be deleted.
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The register VLD_PA_RNG(0x118) was forgot to backup while adding 4GB
mode support for mt2712. this patch add it.
Fixes: 30e2fccf95 ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Normally the M4U HW connect EMI with smi. the diagram is like below:
EMI
|
M4U
|
smi-common
|
-----------------
| | | | ...
larb0 larb1 larb2 larb3
Actually there are 2 mmu cells in the M4U HW, like this diagram:
EMI
---------
| |
mmu0 mmu1 <- M4U
| |
---------
|
smi-common
|
-----------------
| | | | ...
larb0 larb1 larb2 larb3
This patch add support for mmu1. In order to get better performance,
we could adjust some larbs go to mmu1 while the others still go to
mmu0. This is controlled by a SMI COMMON register SMI_BUS_SEL(0x220).
mt2712, mt8173 and mt8183 M4U HW all have 2 mmu cells. the default
value of that register is 0 which means all the larbs go to mmu0
defaultly.
This is a preparing patch for adjusting SMI_BUS_SEL for mt8183.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The M4U IP blocks in mt8183 is MediaTek's generation2 M4U which use
the ARM Short-descriptor like mt8173, and most of the HW registers
are the same.
Here list main differences between mt8183 and mt8173/mt2712:
1) mt8183 has only one M4U HW like mt8173 while mt2712 has two.
2) mt8183 don't have the "bclk" clock, it use the EMI clock instead.
3) mt8183 can support the dram over 4GB, but it doesn't call this "4GB
mode".
4) mt8183 pgtable base register(0x0) extend bit[1:0] which represent
the bit[33:32] in the physical address of the pgtable base, But the
standard ttbr0[1] means the S bit which is enabled defaultly, Hence,
we add a mask.
5) mt8183 HW has a GALS modules, SMI should enable "has_gals" support.
6) mt8183 need reset_axi like mt8173.
7) the larb-id in smi-common is remapped. M4U should add its larbid_remap.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Both mt8173 and mt8183 don't have this vld_pa_rng(valid physical address
range) register while mt2712 have. Move it into the plat_data.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In mt8173 and mt8183, 0x48 is REG_MMU_STANDARD_AXI_MODE while it is
REG_MMU_CTRL in the other SoCs, and the bits meaning is completely
different with the REG_MMU_STANDARD_AXI_MODE.
This patch moves this property to plat_data, it's also a preparing
patch for mt8183.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The protect memory setting is a little different in the different SoCs.
In the register REG_MMU_CTRL_REG(0x110), the TF_PROT(translation fault
protect) shift bit is normally 4 while it shift 5 bits only in the
mt8173. This patch delete the complex MACRO and use a common if-else
instead.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The larb-id may be remapped in the smi-common, this means the
larb-id reported in the mtk_iommu_isr isn't the real larb-id,
Take mt8183 as a example:
M4U
|
---------------------------------------------
| SMI common |
-0-----7-----5-----6-----1-----2------3-----4- <- Id remapped
| | | | | | | |
larb0 larb1 IPU0 IPU1 larb4 larb5 larb6 CCU
disp vdec img cam venc img cam
As above, larb0 connects with the id 0 in smi-common.
larb1 connects with the id 7 in smi-common.
...
If the larb-id reported in the isr is 7, actually it's larb1(vdec).
In order to output the right larb-id in the isr, we add a larb-id
remapping relationship in this patch.
If there is no this larb-id remapping in some SoCs, use the linear
mapping array instead.
This also is a preparing patch for mt8183.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In some SoCs, M4U doesn't have its "bclk", it will use the EMI
clock instead which has always been enabled when entering kernel.
Currently mt2712 and mt8173 have this bclk while mt8183 doesn't.
This also is a preparing patch for mt8183.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After extending the v7s support PA[33:32] for MediaTek, we have to adjust
the PA ourself for the 4GB mode.
In the 4GB Mode, the PA will remap like this:
CPU PA -> M4U output PA
0x4000_0000 0x1_4000_0000 (Add bit32)
0x8000_0000 0x1_8000_0000 ...
0xc000_0000 0x1_c000_0000 ...
0x1_0000_0000 0x1_0000_0000 (No change)
1) Always add bit32 for CPU PA in ->map.
2) Discard the bit32 in iova_to_phys if PA > 0x1_4000_0000 since the
iommu consumer always use the CPU PA.
Besides, the "oas" always is set to 34 since v7s has already supported our
case.
Both mt2712 and mt8173 support this "4GB mode" while the mt8183 don't.
The PA in mt8183 won't remap.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In previous mt2712/mt8173, MediaTek extend the v7s to support 4GB dram.
But in the latest mt8183, We extend it to support the PA up to 34bit.
Then the "MTK_4GB" name is not so fit, This patch only change the quirk
name to "MTK_EXT".
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In M4U 4GB mode, the physical address is remapped as below:
CPU Physical address:
====================
0 1G 2G 3G 4G 5G
|---A---|---B---|---C---|---D---|---E---|
+--I/O--+------------Memory-------------+
IOMMU output physical address:
=============================
4G 5G 6G 7G 8G
|---E---|---B---|---C---|---D---|
+------------Memory-------------+
The Region 'A'(I/O) can not be mapped by M4U; For Region 'B'/'C'/'D', the
bit32 of the CPU physical address always is needed to set, and for Region
'E', the CPU physical address keep as is. something looks like this:
CPU PA -> M4U OUTPUT PA
0x4000_0000 0x1_4000_0000 (Add bit32)
0x8000_0000 0x1_8000_0000 ...
0xc000_0000 0x1_c000_0000 ...
0x1_0000_0000 0x1_0000_0000 (No change)
Additionally, the iommu consumers always use the CPU phyiscal address.
The PA in the iova_to_phys that is got from v7s always is u32, But
from the CPU point of view, PA only need add BIT(32) when PA < 0x4000_0000.
Fixes: 30e2fccf95 ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use a struct as the platform special data instead of the enumeration.
This is a prepare patch for adding mt8183 iommu support.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With all the pieces in place, we can finally propagate the
iommu_iotlb_gather structure from the call to unmap() down to the IOMMU
drivers' implementation of ->tlb_add_page(). Currently everybody ignores
it, but the machinery is now there to defer invalidation.
Signed-off-by: Will Deacon <will@kernel.org>
Update the io-pgtable ->unmap() function to take an iommu_iotlb_gather
pointer as an argument, and update the callers as appropriate.
Signed-off-by: Will Deacon <will@kernel.org>
The ->tlb_add_flush() callback in the io-pgtable API now looks a bit
silly:
- It takes a size and a granule, which are always the same
- It takes a 'bool leaf', which is always true
- It only ever flushes a single page
With that in mind, replace it with an optional ->tlb_add_page() callback
that drops the useless parameters.
Signed-off-by: Will Deacon <will@kernel.org>
Hook up ->tlb_flush_walk() and ->tlb_flush_leaf() in drivers using the
io-pgtable API so that we can start making use of them in the page-table
code. For now, they can just wrap the implementations of ->tlb_add_flush
and ->tlb_sync pending future optimisation in each driver.
Signed-off-by: Will Deacon <will@kernel.org>
To allow IOMMU drivers to batch up TLB flushing operations and postpone
them until ->iotlb_sync() is called, extend the prototypes for the
->unmap() and ->iotlb_sync() IOMMU ops callbacks to take a pointer to
the current iommu_iotlb_gather structure.
All affected IOMMU drivers are updated, but there should be no
functional change since the extra parameter is ignored for now.
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for TLB flush gathering in the IOMMU API, rename the
iommu_gather_ops structure in io-pgtable to iommu_flush_ops, which
better describes its purpose and avoids the potential for confusion
between different levels of the API.
$ find linux/ -type f -name '*.[ch]' | xargs sed -i 's/gather_ops/flush_ops/g'
Signed-off-by: Will Deacon <will@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
581 static int mtk_iommu_probe(struct platform_device *pdev)
582 {
...
626 for (i = 0; i < larb_nr; i++) {
627 struct device_node *larbnode;
...
631 larbnode = of_parse_phandle(...);
632 if (!larbnode)
633 return -EINVAL;
634
635 if (!of_device_is_available(larbnode))
636 continue; ---> leaked here
637
...
643 if (!plarbdev)
644 return -EPROBE_DEFER; ---> leaked here
...
647 component_match_add_release(dev, &match, release_of,
648 compare_of, larbnode);
---> release_of will call of_node_put
649 }
...
650
Detected by coccinelle with the following warnings:
./drivers/iommu/mtk_iommu.c:644:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 631, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_ops are not supposed to change at runtime.
Functions 'iommu_device_set_ops' and 'bus_set_iommu' working with
const iommu_ops provided by <linux/iommu.h>. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
(Change the title to iommu/mediatek: xx)
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All iommu drivers use the default_iommu_map_sg implementation, and there
is no good reason to ever override it. Just expose it as iommu_map_sg
directly and remove the indirection, specially in our post-spectre world
where indirect calls are horribly expensive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In MediaTek's IOMMU design, When a iommu translation fault occurs
(HW can NOT translate the destination address to a valid physical
address), the IOMMU HW output the dirty data into a special memory
to avoid corrupting the main memory, this is called "protect memory".
the register(0x114) for protect memory is a little different between
mt8173 and mt2712.
In the mt8173, bit[30:6] in the register represents [31:7] of the
physical address. In the 4GB mode, the register bit[31] should be 1.
While in the mt2712, the bits don't shift. bit[31:7] in the register
represents [31:7] in the physical address, and bit[1:0] in the
register represents bit[33:32] of the physical address if it has.
Fixes: e6dec92308 ("iommu/mediatek: Add mt2712 IOMMU support")
Reported-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the core API issues its own post-unmap TLB sync call, push that
operation out from the io-pgtable-arm-v7s internals into the users. For
now, we leave the invalidation implicit in the unmap operation, since
none of the current users would benefit much from any change to that.
Note that the conversion of msm_iommu is implicit, since that apparently
has no specific TLB sync operation anyway.
CC: Yong Wu <yong.wu@mediatek.com>
CC: Rob Clark <robdclark@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build warning while ARCH=arm:
drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_iova_to_phys':
include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
#define BIT(nr) (1UL << (nr))
^
>> drivers/iommu/mtk_iommu.c:407:9: note: in expansion of macro 'BIT'
pa |= BIT(32);
drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_probe':
include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
#define BIT(nr) (1UL << (nr))
^
drivers/iommu/mtk_iommu.c:589:35: note: in expansion of macro 'BIT'
data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT));
Use BIT_ULL instead of BIT.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build error:
drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_hw_init':
>> drivers/iommu/mtk_iommu.c:536:30: error: 'const struct mtk_iommu_data'
has no member named 'm4u_type'; did you mean 'm4u_dom'?
if (data->enable_4GB && data->m4u_type != M4U_MT8173) {
This patch fix it, use "m4u_plat" instead of "m4u_type".
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch is for 4GB mode, mainly for 4 issues:
1) Fix a 4GB bug:
if the dram base is 0x4000_0000, the dram size is 0xc000_0000.
then the code just meet a corner case because max_pfn is
0x10_0000.
data->enable_4GB = !!(max_pfn > (0xffffffffUL >> PAGE_SHIFT));
It's true at the case above. That is unexpected.
2) In mt2712, there is a new register for the 4GB PA range(0x118)
we should enlarge the max PA range, or the HW will report
error.
The dram range is from 0x1_0000_0000 to 0x1_ffff_ffff in the 4GB
mode, we cut out the bit[32:30] of the SA(Start address) and
EA(End address) into this REG_MMU_VLD_PA_RNG(0x118).
3) In mt2712, the register(0x13c) is extended for 4GB mode.
bit[7:6] indicate the valid PA[32:33]. Thus, we don't mask the
value and print it directly for debug.
4) if 4GB is enabled, the dram PA range is from 0x1_0000_0000 to
0x1_ffff_ffff. Thus, the PA from iova_to_pa should also '|' BIT(32)
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When system suspend, infra power domain may be off, and the iommu's
clock must be disabled when system off, or the iommu's bclk clock maybe
disabled after system resume.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After adding the global list for M4U HW, We get a chance to
move the pagetable allocation into the mtk_iommu_domain_alloc.
Let the domain_alloc do the right thing.
This patch is for fixing this problem[1].
[1]: https://patchwork.codeaurora.org/patch/53987/
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In theory, If there are 2 M4U HWs, there should be 2 IOMMU domains.
But one IOMMU domain(4GB iova range) is enough for us currently,
It's unnecessary to maintain 2 pagetables.
Besides, This patch can simplify our consumer code largely. They don't
need map a iova range from one domain into another, They can share the
iova address easily.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
ARM Short-descriptor like mt8173, and most of the HW registers are
the same.
The difference is that there are 2 M4U HWs in mt2712 while there's
only one in mt8173. The purpose of 2 M4U HWs is for balance the
bandwidth.
Normally if there are 2 M4U HWs, there should be 2 iommu domains,
each M4U has a iommu domain.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The definition of MTK_M4U_TO_LARB and MTK_M4U_TO_PORT are shared by
all the gen2 M4U HWs. Thus, Move them out from mt8173-larb-port.h,
and put them into the c file.
Suggested-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Under certain circumstances, the io-pgtable code may end up issuing two
TLB sync operations without any intervening invalidations. This goes
badly for the M4U hardware, since it means the second sync ends up
polling for a non-existent operation to finish, and as a result times
out and warns. The io_pgtable_tlb_* helpers implement a high-level
optimisation to avoid issuing the second sync at all in such cases, but
in order to work correctly that requires all pagetable operations to be
serialised under a lock, thus is no longer applicable to all io-pgtable
users.
Since we're the only user actually relying on this flag for correctness,
let's reimplement it locally to avoid the headache of trying to make the
high-level version concurrency-safe for other users.
CC: Yong Wu <yong.wu@mediatek.com>
CC: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
And also move its remaining functionality to
iommu_device_register() and 'struct iommu_device'.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For each subsequent device assigned to the m4u_group after its initial
allocation, we need to take an additional reference. Otherwise, the
caller of iommu_group_get_for_dev() will inadvertently remove the
reference taken by iommu_group_add_device(), and the group will be
freed prematurely if any device is removed.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert DT component matching to use component_match_add_release().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Our per-device data consists of the M4U instance and firmware-provided
list of LARB IDs, which is a perfect fit for the generic iommu_fwspec
machinery. Use that directly as a simpler alternative to the custom
archdata code.
CC: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Yong Wu