commit da3cc91b8d upstream.
The commit 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API
TLB sync") help move the tlb_sync of unmap from v7s into the iommu
framework. It helps add a new function "mtk_iommu_iotlb_sync", But it
lacked the lock, then it will cause the variable "tlb_flush_active"
may be changed unexpectedly, we could see this warning log randomly:
mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to
full flush
The HW requires tlb_flush/tlb_sync in pairs strictly, this patch adds
a new tlb_lock for tlb operations to fix this issue.
Fixes: 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the "struct mtk_smi_iommu" to simplify the code since it has only
one item in it right now.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The register VLD_PA_RNG(0x118) was forgot to backup while adding 4GB
mode support for mt2712. this patch add it.
Fixes: 30e2fccf95 ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The M4U IP blocks in mt8183 is MediaTek's generation2 M4U which use
the ARM Short-descriptor like mt8173, and most of the HW registers
are the same.
Here list main differences between mt8183 and mt8173/mt2712:
1) mt8183 has only one M4U HW like mt8173 while mt2712 has two.
2) mt8183 don't have the "bclk" clock, it use the EMI clock instead.
3) mt8183 can support the dram over 4GB, but it doesn't call this "4GB
mode".
4) mt8183 pgtable base register(0x0) extend bit[1:0] which represent
the bit[33:32] in the physical address of the pgtable base, But the
standard ttbr0[1] means the S bit which is enabled defaultly, Hence,
we add a mask.
5) mt8183 HW has a GALS modules, SMI should enable "has_gals" support.
6) mt8183 need reset_axi like mt8173.
7) the larb-id in smi-common is remapped. M4U should add its larbid_remap.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Both mt8173 and mt8183 don't have this vld_pa_rng(valid physical address
range) register while mt2712 have. Move it into the plat_data.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In mt8173 and mt8183, 0x48 is REG_MMU_STANDARD_AXI_MODE while it is
REG_MMU_CTRL in the other SoCs, and the bits meaning is completely
different with the REG_MMU_STANDARD_AXI_MODE.
This patch moves this property to plat_data, it's also a preparing
patch for mt8183.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The larb-id may be remapped in the smi-common, this means the
larb-id reported in the mtk_iommu_isr isn't the real larb-id,
Take mt8183 as a example:
M4U
|
---------------------------------------------
| SMI common |
-0-----7-----5-----6-----1-----2------3-----4- <- Id remapped
| | | | | | | |
larb0 larb1 IPU0 IPU1 larb4 larb5 larb6 CCU
disp vdec img cam venc img cam
As above, larb0 connects with the id 0 in smi-common.
larb1 connects with the id 7 in smi-common.
...
If the larb-id reported in the isr is 7, actually it's larb1(vdec).
In order to output the right larb-id in the isr, we add a larb-id
remapping relationship in this patch.
If there is no this larb-id remapping in some SoCs, use the linear
mapping array instead.
This also is a preparing patch for mt8183.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In some SoCs, M4U doesn't have its "bclk", it will use the EMI
clock instead which has always been enabled when entering kernel.
Currently mt2712 and mt8173 have this bclk while mt8183 doesn't.
This also is a preparing patch for mt8183.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After extending the v7s support PA[33:32] for MediaTek, we have to adjust
the PA ourself for the 4GB mode.
In the 4GB Mode, the PA will remap like this:
CPU PA -> M4U output PA
0x4000_0000 0x1_4000_0000 (Add bit32)
0x8000_0000 0x1_8000_0000 ...
0xc000_0000 0x1_c000_0000 ...
0x1_0000_0000 0x1_0000_0000 (No change)
1) Always add bit32 for CPU PA in ->map.
2) Discard the bit32 in iova_to_phys if PA > 0x1_4000_0000 since the
iommu consumer always use the CPU PA.
Besides, the "oas" always is set to 34 since v7s has already supported our
case.
Both mt2712 and mt8173 support this "4GB mode" while the mt8183 don't.
The PA in mt8183 won't remap.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use a struct as the platform special data instead of the enumeration.
This is a prepare patch for adding mt8183 iommu support.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move io-pgtable.h to include/linux/ and export alloc_io_pgtable_ops
and free_io_pgtable_ops. This enables drivers outside drivers/iommu/ to
use the page table library. Specifically, some ARM Mali GPUs use the
ARM page table formats.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In MediaTek's IOMMU design, When a iommu translation fault occurs
(HW can NOT translate the destination address to a valid physical
address), the IOMMU HW output the dirty data into a special memory
to avoid corrupting the main memory, this is called "protect memory".
the register(0x114) for protect memory is a little different between
mt8173 and mt2712.
In the mt8173, bit[30:6] in the register represents [31:7] of the
physical address. In the 4GB mode, the register bit[31] should be 1.
While in the mt2712, the bits don't shift. bit[31:7] in the register
represents [31:7] in the physical address, and bit[1:0] in the
register represents bit[33:32] of the physical address if it has.
Fixes: e6dec92308 ("iommu/mediatek: Add mt2712 IOMMU support")
Reported-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In theory, If there are 2 M4U HWs, there should be 2 IOMMU domains.
But one IOMMU domain(4GB iova range) is enough for us currently,
It's unnecessary to maintain 2 pagetables.
Besides, This patch can simplify our consumer code largely. They don't
need map a iova range from one domain into another, They can share the
iova address easily.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
ARM Short-descriptor like mt8173, and most of the HW registers are
the same.
The difference is that there are 2 M4U HWs in mt2712 while there's
only one in mt8173. The purpose of 2 M4U HWs is for balance the
bandwidth.
Normally if there are 2 M4U HWs, there should be 2 iommu domains,
each M4U has a iommu domain.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Under certain circumstances, the io-pgtable code may end up issuing two
TLB sync operations without any intervening invalidations. This goes
badly for the M4U hardware, since it means the second sync ends up
polling for a non-existent operation to finish, and as a result times
out and warns. The io_pgtable_tlb_* helpers implement a high-level
optimisation to avoid issuing the second sync at all in such cases, but
in order to work correctly that requires all pagetable operations to be
serialised under a lock, thus is no longer applicable to all io-pgtable
users.
Since we're the only user actually relying on this flag for correctness,
let's reimplement it locally to avoid the headache of trying to make the
high-level version concurrency-safe for other users.
CC: Yong Wu <yong.wu@mediatek.com>
CC: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Convert DT component matching to use component_match_add_release().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Our per-device data consists of the M4U instance and firmware-provided
list of LARB IDs, which is a perfect fit for the generic iommu_fwspec
machinery. Use that directly instead of the custom archdata code - while
we can't rely on the of_xlate() mechanism to initialise things until the
32-bit ARM DMA code learns about groups and default domains, it still
results in a reasonable simplification overall.
CC: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This was an oversight while merging these functions. Fix it.
Cc: Honghui Zhang <honghui.zhang@mediatek.com>
Fixes: 9ca340c98c ('iommu/mediatek: move the common struct into header file')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the struct defines of mtk iommu into a new header files for
common use.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Yong Wu