The Linux kernel regulator core implementation does not accept negative
voltage values; all negative values are treated as errors.
The problem with the EPDC is that the panel uses a negative voltage
regulator which fails to be enabled by the regulator core. This issue has
slipped up until the 4.9 rebase because the voltage range [min, max] was
checked against only when min = max. This has been fixed in 4.9, resulting
in errors in the VCOM regulator driver.
The fix is to use the negative values when communicating with the hardware,
but send only positive values to the regulator core.
This patch sends the absolute value to the regulator core and transforms
the received value (from the regulator core) to negative one before sending
it to hardware.
Fix device tree to deal with negative voltage regulator values by setting
min_value = -real_max_value and vice versa. Boards affected:
- imx6dl-sabresd
- imx6ull-14x14-ddr3-arm2
- imx7d-12x12-lpddr3-arm2
- imx7d-sdb
- imx6sll-evk
- imx6sl-evk
- imx6sll-lpddr3-arm2
Signed-off-by: Cristina Ciocan <cristina-mihaela.ciocan@nxp.com>
[Arul: Fix merge conflicts]
Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com>
[Robby: split original patch to driver and dts part. this is driver part.]
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Add PMIC 'MAX17135' module drivers to 4.1.y kernel. These are necessary
to supply power for E-ink panel display functions.
Signed-off-by: Robby Cai <r63905@freescale.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Cristina Ciocan