[ Upstream commit 47a3565e8b ]
We might not do the final se_cmd put from vhost_scsi_complete_cmd_work.
When the last put happens a little later then we could race where
vhost_scsi_complete_cmd_work does vhost_signal, the guest runs and sends
more IO, and vhost_scsi_handle_vq runs but does not find any free cmds.
This patch has us delay completing the cmd until the last lio core ref
is dropped. We then know that once we signal to the guest that the cmd
is completed that if it queues a new command it will find a free cmd.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/1604986403-4931-4-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 295c1b9852 upstream.
vhost/scsi doesn't handle type conversion correctly
for request type when using virtio 1.0 and up for BE,
or cross-endian platforms.
Fix it up using vhost_32_to_cpu.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5ae6a6a915 ]
vhost-scsi pre-allocates the maximum sg entries per command and if a
command requires more than VHOST_SCSI_PREALLOC_SGLS entries, then that
command is failed by it. This patch lets vhost communicate the max sg limit
when it registers vhost_scsi_ops with TCM. With this change, TCM would
report the max sg entries through "Block Limits" VPD page which will be
typically queried by the SCSI initiator during device discovery. By knowing
this limit, the initiator could ensure the maximum transfer length is less
than or equal to what is reported by vhost-scsi.
Link: https://lore.kernel.org/r/1590166317-953-1-git-send-email-sudhakar.panneerselvam@oracle.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing scsi kthread from hogging cpu
which is guest triggerable.
This addresses CVE-2019-3900.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Fixes: 057cbf49a1 ("tcm_vhost: Initial merge for vhost level target fabric driver")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We used to have vhost_exceeds_weight() for vhost-net to:
- prevent vhost kthread from hogging the cpu
- balance the time spent between TX and RX
This function could be useful for vsock and scsi as well. So move it
to vhost.c. Device must specify a weight which counts the number of
requests, or it can also specific a byte_weight which counts the
number of bytes that has been processed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At this point, vs_tpg is not public at all; tv_tpg_vhost_count
is accessed under tpg->tv_tpg_mutex; tpg->vhost_scsi is
accessed under vhost_scsi_mutex. Therefor there are no atomic
operations involved at all here, just remove the barrier.
Reported-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
hisi_sas, target/iscsi and target/core. Additionally Christoph
refactored gdth as part of the dma changes. The major mid-layer
change this time is the removal of bidi commands and with them the
whole of the osd/exofs driver and filesystem.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23
ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z
f69LpXGmMpuagKGvvd4=
=Fhy1
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
hisi_sas, target/iscsi and target/core.
Additionally Christoph refactored gdth as part of the dma changes. The
major mid-layer change this time is the removal of bidi commands and
with them the whole of the osd/exofs driver and filesystem. This is a
major simplification for block and mq in particular"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
scsi: cxgb4i: get pf number from lldi->pf
scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
scsi: mpt3sas: Add missing breaks in switch statements
scsi: aacraid: Fix missing break in switch statement
scsi: kill command serial number
scsi: csiostor: drop serial_number usage
scsi: mvumi: use request tag instead of serial_number
scsi: dpt_i2o: remove serial number usage
scsi: st: osst: Remove negative constant left-shifts
scsi: ufs-bsg: Allow reading descriptors
scsi: ufs: Allow reading descriptor via raw upiu
scsi: ufs-bsg: Change the calling convention for write descriptor
scsi: ufs: Remove unused device quirks
Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
scsi: megaraid_sas: Remove a bunch of set but not used variables
scsi: clean obsolete return values of eh_timed_out
scsi: sd: Optimal I/O size should be a multiple of physical block size
scsi: MAINTAINERS: SCSI initiator and target tweaks
scsi: fcoe: make use of fip_mode enum complete
...
Due to the patch that makes TMF handling synchronous the
write_pending_status() callback function is no longer called. Hence remove
it.
Acked-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Saurav Kashyap <saurav.kashyap@qlogic.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After batched used ring updating was introduced in commit e2b3b35eb9
("vhost_net: batch used ring update in rx"). We tend to batch heads in
vq->heads for more than one packet. But the quota passed to
get_rx_bufs() was not correctly limited, which can result a OOB write
in vq->heads.
headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
vhost_len, &in, vq_log, &log,
likely(mergeable) ? UIO_MAXIOV : 1);
UIO_MAXIOV was still used which is wrong since we could have batched
used in vq->heads, this will cause OOB if the next buffer needs more
than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've
batched 64 (VHOST_NET_BATCH) heads:
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
=============================================================================
BUG kmalloc-8k (Tainted: G B ): Redzone overwritten
-----------------------------------------------------------------------------
INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc
INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674
kmem_cache_alloc_trace+0xbb/0x140
alloc_pd+0x22/0x60
gen8_ppgtt_create+0x11d/0x5f0
i915_ppgtt_create+0x16/0x80
i915_gem_create_context+0x248/0x390
i915_gem_context_create_ioctl+0x4b/0xe0
drm_ioctl_kernel+0xa5/0xf0
drm_ioctl+0x2ed/0x3a0
do_vfs_ioctl+0x9f/0x620
ksys_ioctl+0x6b/0x80
__x64_sys_ioctl+0x11/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x (null) flags=0x200000000010201
INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b
Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for
vhost-net. This is done through set the limitation through
vhost_dev_init(), then set_owner can allocate the number of iov in a
per device manner.
This fixes CVE-2018-16880.
Fixes: e2b3b35eb9 ("vhost_net: batch used ring update in rx")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uses copy_to_iter() instead of __copy_to_user() in order to ensure we
support arbitrary layouts and an input buffer split across iov entries.
Fixes: 0d02dbd68c ("vhost/scsi: Respond to control queue operations")
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
discard in virtio blk
misc fixes and cleanups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcLSujAAoJECgfDbjSjVRpguUH/jHFcIR0egb9k0nEx2ETxoPw
HKjV3zzWW+WKYu7NNXyF4qiIedlQvTLUt1gRNtNa/G0C+AFKKPl+ynBNmBFfM3Lt
RCpt0ctAaJDpr8xABC4PRoAU2Vga9Glkt9SobZ7kBDCXcCl6PDYk3zLryG87N5Rf
pQJeTOpYtE8OgQaO7w3+7u5YmfGWaCrsxMWuq43ry9mn0J6QaJ6FYrz5+V90uOcT
o5NtauCyTzIj+wrsh75qg6KWG8zLFwrskCxX8CmYd+j7ZTDZc5U9eaYJRx3HdqOE
//aXqXy17trgy5GGTw9IPKE30JOztEhER9HzQASNVkmjYTq7q8DTMlnVIMSLRF0=
=NI+Y
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost updates from Michael Tsirkin:
"Features, fixes, cleanups:
- discard in virtio blk
- misc fixes and cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: correct the related warning message
vhost: split structs into a separate header file
virtio: remove deprecated VIRTIO_PCI_CONFIG()
vhost/vsock: switch to a mutex for vhost_vsock_hash
virtio_blk: add discard and write zeroes support
Fixes: 'commit d588cf8f61 ("target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem")'
'commit cbbd26b8b1 ("[iov_iter] new primitives - copy_from_iter_full() and friends")'
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
iscsi_target_mod is the only LIO fabric where fabric_ops.name differs from
the fabric_ops.fabric_name string. fabric_ops.name is used when matching
target/$fabric ConfigFS create paths, so rename it .fabric_alias and
fallback to target/$fabric vs .fabric_name comparison if .fabric_alias
isn't initialised. iscsi_target_mod is the only fabric module to set
.fabric_alias . All other fabric modules rely on .fabric_name matching and
can drop the duplicate string.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All fabrics return a const string. In all cases *except* iSCSI the
get_fabric_name() string matches fabric_ops.name.
Both fabric_ops.get_fabric_name() and fabric_ops.name are user-facing, with
the former being used for PR/ALUA state and the latter for ConfigFS
(config/target/$name), so we unfortunately need to keep both strings around
for now. Replace the useless .get_fabric_name() accessor function with a
const string fabric_name member variable.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change the request queue handler to use common handling routines same
as the control queue handler.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prepare to change the request queue handler to use common handling
routines.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-scsi driver currently does not handle any control queue
operations. In particular, vhost_scsi_ctl_handle_kick, merely prints out
a debug message but does nothing else. This can cause guest VMs to hang.
As part of SCSI recovery from an error, e.g., an I/O timeout, the SCSI
midlayer attempts to abort the failed operation. The SCSI virtio driver
translates the abort to a SCSI TMF request that gets put on the control
queue (virtscsi_abort -> virtscsi_tmf). The SCSI virtio driver then
waits indefinitely for this request to be completed, but it never will
because vhost-scsi never responds to that request.
To avoid a hang, always respond to control queue operations; explicitly
reject TMF requests, and return a no-op response to event requests.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commands with protection information included were not truncating the
protection iov_iter to the number of protection bytes in the command.
This resulted in vhost_scsi mis-calculating the size of the protection
SGL in vhost_scsi_calc_sgls(), and including both the protection and
data SG entries in the protection SGL.
Fixes: 09b13fa8c1 ("vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 09b13fa8c1
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
No new features but a bunch of tweaks such as
switching balloon from oom notifier to shrinker.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbfIxQAAoJECgfDbjSjVRp/3AH/1z+pJMvkDQN412qVOFEo+BI
gRnTBw+0XdnR76eug11PFhMqBupQXwJ26NHfmSkoxqXy2NwRxX5Za2dHE1KJ+Sws
NeBfwVIqwFBufGHMG7Uq/JNsLgSEB/ketNPWnJIzNVQbQOfdGbhmYMyS0nSy4S8m
JcZX/iwA7XTxApSL5IWCM0ScddgFTdTkB6K/me8XNnIFWsX0mnRWly+L/7CDNx18
QdKWsAimZxIjtF6DIYieph1oirzeWmAf42raEghNe1dSeT3k4CnU+hYw/ofMo9Wm
5gtFRLP8vTyR1zlaSTDxElgFcTwwgiTpkX+xd1htegrm8M7Yd3RO/WUTFCFPhf4=
=JrpR
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio, vhost: fixes, tweaks
No new features but a bunch of tweaks such as switching balloon from
oom notifier to shrinker"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/scsi: increase VHOST_SCSI_PREALLOC_PROT_SGLS to 2048
vhost: allow vhost-scsi driver to be built-in
virtio: pci-legacy: Validate queue pfn
virtio: mmio-v1: Validate queue PFN
virtio_balloon: replace oom notifier with shrinker
virtio-balloon: kzalloc the vb struct
virtio-balloon: remove BUG() in init_vqs
The current value of VHOST_SCSI_PREALLOC_PROT_SGLS is too small to
accommodate larger I/Os, e.g. 16-32 MiB, when the VIRTIO_SCSI_F_T10_PI
feature bit is negotiated and the backing store supports T10 PI.
vhost-scsi rejects the command with errors like:
[ 59.581317] vhost_scsi_calc_sgls: requested sgl_count: 1820 exceeds pre-allocated max_sgls: 512
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This converts drivers that were only calling transport_deregister_session
to use target_remove_session. The calling of
transport_deregister_session_configfs via target_remove_session for these
types of drivers is ok, because they were not exporting info from fields
like sess_acl_list, sess->se_tpg and sess->fabric_sess_ptr from configfs
accessible functions, so they will see no difference.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename target_alloc_session to target_setup_session to avoid confusion with
the other transport session allocation function that only allocates the
session and because the target_alloc_session does so much more. It
allocates the session, sets up the nacl and registers the session.
The next patch will then add a remove function to match the setup in this
one, so it should make sense for all drivers, except iscsi, to just call
those 2 functions to setup and remove a session.
iscsi will continue to be the odd driver.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Boot <bootc@bootc.net>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: <qla2xxx-upstream@qlogic.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since most target drivers do not use the second fabric_make_tpg() argument
("group") and since it is trivial to derive the group pointer from the wwn
pointer, do not pass the group pointer to fabric_make_tpg().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sbitmap and the percpu_ida perform essentially the same task,
allocating tags for commands. The sbitmap outperforms the percpu_ida as
documented here: https://lkml.org/lkml/2014/4/22/553
The sbitmap interface is a little harder to use, but being able to remove
the percpu_ida code and getting better performance justifies the additional
complexity.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> # f_tcm
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce target_free_tag() and convert all drivers to use it.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit ea5d404655 ("vhost: fix release path lockdep checks"),
Michael added a flag to check whether we should hold a lock in
vhost_dev_cleanup(), however, in commit 47283bef7e ("vhost: move
memory pointer to VQs"), RCU operations have been replaced by
mutex, we can remove the no-longer-used `locked' parameter now.
Signed-off-by: Caspar Zhang <jinli.zjl@alibaba-inc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the specification of four data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull iov_iter updates from Al Viro:
- bio_{map,copy}_user_iov() series; those are cleanups - fixes from the
same pile went into mainline (and stable) in late September.
- fs/iomap.c iov_iter-related fixes
- new primitive - iov_iter_for_each_range(), which applies a function
to kernel-mapped segments of an iov_iter.
Usable for kvec and bvec ones, the latter does kmap()/kunmap() around
the callback. _Not_ usable for iovec- or pipe-backed iov_iter; the
latter is not hard to fix if the need ever appears, the former is by
design.
Another related primitive will have to wait for the next cycle - it
passes page + offset + size instead of pointer + size, and that one
will be usable for everything _except_ kvec. Unfortunately, that one
didn't get exposure in -next yet, so...
- a bit more lustre iov_iter work, including a use case for
iov_iter_for_each_range() (checksum calculation)
- vhost/scsi leak fix in failure exit
- misc cleanups and detritectomy...
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits)
iomap_dio_actor(): fix iov_iter bugs
switch ksocknal_lib_recv_...() to use of iov_iter_for_each_range()
lustre: switch struct ksock_conn to iov_iter
vhost/scsi: switch to iov_iter_get_pages()
fix a page leak in vhost_scsi_iov_to_sgl() error recovery
new primitive: iov_iter_for_each_range()
lnet_return_rx_credits_locked: don't abuse list_entry
xen: don't open-code iov_iter_kvec()
orangefs: remove detritus from struct orangefs_kiocb_s
kill iov_shorten()
bio_alloc_map_data(): do bmd->iter setup right there
bio_copy_user_iov(): saner bio size calculation
bio_map_user_iov(): get rid of copying iov_iter
bio_copy_from_iter(): get rid of copying iov_iter
move more stuff down into bio_copy_user_iov()
blk_rq_map_user_iov(): move iov_iter_advance() down
bio_map_user_iov(): get rid of the iov_for_each()
bio_map_user_iov(): move alignment check into the main loop
don't rely upon subsequent bio_add_pc_page() calls failing
... and with iov_iter_get_pages_alloc() it becomes even simpler
...
Fixes in qemu, vhost and virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaDdyiAAoJECgfDbjSjVRpEekIAMh6WWhjHWSG1PukqSZYiHEN
S1GU+wViGLai9zI54o8/VcRcRMuJMcN/HiYXh/28N3v4MzSxtJy12c/oV13zexAZ
ypALoQM6Fazm1hPdAMujFAQ4rgAgYFZ98822HU3rXwfS+jW1JY/LV0cLoIL9BStQ
aHLr06GGv/Xq3aibECaKvzFcKXi9qCz6Cuw/aKPMmDo89RSvxQyMhneaEW6YyT2L
Srt2lke0W4UbozMAe3UT2SwOMTEpSOnmrTDGqvU4gFtfgAm6Z8HkM1HA/i010Dcc
FsSfa5N9yLD9WodEyKgU0qh3yvhkLwg/Sfiu/KBbbbSSQzjkuqW+XWWJwOAitWA=
=1iSK
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Fixes in qemu, vhost and virtio"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
fw_cfg: fix the command line module name
vhost/vsock: fix uninitialized vhost_vsock->guest_cid
vhost: fix end of range for access_ok
vhost/scsi: Use safe iteration in vhost_scsi_complete_cmd_work()
virtio_balloon: fix deadlock on OOM
The following patch changed the behavior which originally did safe
iteration. Make it safe as it was.
12bdcbd539
vhost/scsi: Don't reinvent the wheel but use existing llist API
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
we are advancing sg as we go, so the pages we need to drop in
case of error are *before* the current sg.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull SCSI target updates from Nicholas Bellinger:
"It's been usually busy for summer, with most of the efforts centered
around TCMU developments and various target-core + fabric driver bug
fixing activities. Not particularly large in terms of LoC, but lots of
smaller patches from many different folks.
The highlights include:
- ibmvscsis logical partition manager support (Michael Cyr + Bryant
Ly)
- Convert target/iblock WRITE_SAME to blkdev_issue_zeroout (hch +
nab)
- Add support for TMR percpu LUN reference counting (nab)
- Fix a potential deadlock between EXTENDED_COPY and iscsi shutdown
(Bart)
- Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce (Jiang Yi)
- Fix TMCU module removal (Xiubo Li)
- Fix iser-target OOPs during login failure (Andrea Righi + Sagi)
- Breakup target-core free_device backend driver callback (mnc)
- Perform TCMU add/delete/reconfig synchronously (mnc)
- Fix TCMU multiple UIO open/close sequences (mnc)
- Fix TCMU CHECK_CONDITION sense handling (mnc)
- Fix target-core SAM_STAT_BUSY + TASK_SET_FULL handling (mnc + nab)
- Introduce TYPE_ZBC support in PSCSI (Damien Le Moal)
- Fix possible TCMU memory leak + OOPs when recalculating cmd base
size (Xiubo Li + Bryant Ly + Damien Le Moal + mnc)
- Add login_keys_workaround attribute for non RFC initiators (Robert
LeBlanc + Arun Easi + nab)"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (68 commits)
iscsi-target: Add login_keys_workaround attribute for non RFC initiators
Revert "qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT"
tcmu: clean up the code and with one small fix
tcmu: Fix possbile memory leak / OOPs when recalculating cmd base size
target: export lio pgr/alua support as device attr
target: Fix return sense reason in target_scsi3_emulate_pr_out
target: Fix cmd size for PR-OUT in passthrough_parse_cdb
tcmu: Fix dev_config_store
target: pscsi: Introduce TYPE_ZBC support
target: Use macro for WRITE_VERIFY_32 operation codes
target: fix SAM_STAT_BUSY/TASK_SET_FULL handling
target: remove transport_complete
pscsi: finish cmd processing from pscsi_req_done
tcmu: fix sense handling during completion
target: add helper to copy sense to se_cmd buffer
target: do not require a transport_complete for SCF_TRANSPORT_TASK_SENSE
target: make device_mutex and device_list static
tcmu: Fix flushing cmd entry dcache page
tcmu: fix multiple uio open/close sequences
tcmu: drop configured check in destroy
...
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator. This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER. It has been always
ignored for smaller sizes. This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.
Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic. Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success. This will work independent of the order and overrides the
default allocator behavior. Page allocator users have several levels of
guarantee vs. cost options (take GFP_KERNEL as an example)
- GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
attempt to free memory at all. The most light weight mode which even
doesn't kick the background reclaim. Should be used carefully because
it might deplete the memory and the next user might hit the more
aggressive reclaim
- GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
allocation without any attempt to free memory from the current
context but can wake kswapd to reclaim memory if the zone is below
the low watermark. Can be used from either atomic contexts or when
the request is a performance optimization and there is another
fallback for a slow path.
- (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
non sleeping allocation with an expensive fallback so it can access
some portion of memory reserves. Usually used from interrupt/bh
context with an expensive slow path fallback.
- GFP_KERNEL - both background and direct reclaim are allowed and the
_default_ page allocator behavior is used. That means that !costly
allocation requests are basically nofail but there is no guarantee of
that behavior so failures have to be checked properly by callers
(e.g. OOM killer victim is allowed to fail currently).
- GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
and all allocation requests fail early rather than cause disruptive
reclaim (one round of reclaim in this implementation). The OOM killer
is not invoked.
- GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
behavior and all allocation requests try really hard. The request
will fail if the reclaim cannot make any progress. The OOM killer
won't be triggered.
- GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
and all allocation requests will loop endlessly until they succeed.
This might be really dangerous especially for larger orders.
Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic. No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.
This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.
[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although llist provides proper APIs, they are not used. Make them used.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This is to silence an uninitialized variable warning in debug output.
The problem is this line:
pr_debug("vhost_get_vq_desc: head: %d, out: %u in: %u\n",
head, out, in);
If "head == vq->num" is true on the first iteration then "out" and "in"
aren't initialized. We handle that a few lines after the printk. I was
tempted to just delete the pr_debug() but I decided to just initialize
them to zero instead.
Also checkpatch.pl complains if variables are declared as just
"unsigned" without the "int".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Declare target_core_fabric_ops strucrues as const as they are only
passed as an argument to the functions target_register_template and
target_unregister_template. The arguments are of type const struct
target_core_fabric_ops *, so target_core_fabric_ops structures having
this property can be declared const.
Done using Coccinelle:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct target_core_fabric_ops i@p={...};
@ok@
position p;
identifier r.i;
@@
(
target_register_template(&i@p)
|
target_unregister_template(&i@p)
)
@bad@
position p!={r.p,ok.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
+const
struct target_core_fabric_ops i;
File size before: drivers/vhost/scsi.o
text data bss dec hex filename
18063 2985 40 21088 5260 drivers/vhost/scsi.o
File size after: drivers/vhost/scsi.o
text data bss dec hex filename
18479 2601 40 21120 5280 drivers/vhost/scsi.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Pull vfs updates from Al Viro:
- more ->d_init() stuff (work.dcache)
- pathname resolution cleanups (work.namei)
- a few missing iov_iter primitives - copy_from_iter_full() and
friends. Either copy the full requested amount, advance the iterator
and return true, or fail, return false and do _not_ advance the
iterator. Quite a few open-coded callers converted (and became more
readable and harder to fuck up that way) (work.iov_iter)
- several assorted patches, the big one being logfs removal
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
logfs: remove from tree
vfs: fix put_compat_statfs64() does not handle errors
namei: fold should_follow_link() with the step into not-followed link
namei: pass both WALK_GET and WALK_MORE to should_follow_link()
namei: invert WALK_PUT logics
namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link()
namei: saner calling conventions for mountpoint_last()
namei.c: get rid of user_path_parent()
switch getfrag callbacks to ..._full() primitives
make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success
[iov_iter] new primitives - copy_from_iter_full() and friends
don't open-code file_inode()
ceph: switch to use of ->d_init()
ceph: unify dentry_operations instances
lustre: switch to use of ->d_init()
Remove the unused but set variable se_tpg in vhost_scsi_nexus_cb() to
fix the following GCC warning when building with 'W=1':
drivers/vhost/scsi.c:1752:26: warning: variable ‘se_tpg’ set but not used
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
copy_from_iter_full(), copy_from_iter_full_nocache() and
csum_and_copy_from_iter_full() - counterparts of copy_from_iter()
et.al., advancing iterator only in case of successful full copy
and returning whether it had been successful or not.
Convert some obvious users. *NOTE* - do not blindly assume that
something is a good candidate for those unless you are sure that
not advancing iov_iter in failure case is the right thing in
this case. Anything that does short read/short write kind of
stuff (or is in a loop, etc.) is unlikely to be a good one.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi
command's response iovec throughout the lifetime of the command. Rather, it
is more likely to contain an iovec from an immediately following command
after looping back around to vhost_get_vq_desc(). Pass along the iovec
entirely instead.
Fixes: 79c14141a4 ("vhost/scsi: Convert completion path to use copy_to_iter")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Turns out the template and thus many drivers got the return value wrong:
0 means the fabrics driver needs to put a session reference, which no
driver except for the iSCSI target drivers did. Fortunately none of these
drivers supports explicit Node ACLs, so the bug was harmless.
Even without that only qla2xxx and iscsi every did real work in
shutdown_session, so get rid of the boilerplate code in all other
drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Pull SCSI target updates from Nicholas Bellinger:
"The highlights this round include:
- Add target_alloc_session() w/ callback helper for doing se_session
allocation + tag + se_node_acl lookup. (HCH + nab)
- Tree-wide fabric driver conversion to use target_alloc_session()
- Convert sbp-target to use percpu_ida tag pre-allocation, and
TARGET_SCF_ACK_KREF I/O krefs (Chris Boot + nab)
- Convert usb-gadget to use percpu_ida tag pre-allocation, and
TARGET_SCF_ACK_KREF I/O krefs (Andrzej Pietrasiewicz + nab)
- Convert xen-scsiback to use percpu_ida tag pre-allocation, and
TARGET_SCF_ACK_KREF I/O krefs (Juergen Gross + nab)
- Convert tcm_fc to use TARGET_SCF_ACK_KREF I/O + TMR krefs
- Convert ib_srpt to use percpu_ida tag pre-allocation
- Add DebugFS node for qla2xxx target sess list (Quinn)
- Rework iser-target connection termination (Jenny + Sagi)
- Convert iser-target to new CQ API (HCH)
- Add pass-through WRITE_SAME support for IBLOCK (Mike Christie)
- Introduce data_bitmap for asynchronous access of data area (Sheng
Yang + Andy)
- Fix target_release_cmd_kref shutdown comp leak (Himanshu Madhani)
Also, there is a separate PULL request coming for cxgb4 NIC driver
prerequisites for supporting hw iscsi segmentation offload (ISO), that
will be the base for a number of v4.7 developments involving
iscsi-target hw offloads"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (36 commits)
target: Fix target_release_cmd_kref shutdown comp leak
target: Avoid DataIN transfers for non-GOOD SAM status
target/user: Report capability of handling out-of-order completions to userspace
target/user: Fix size_t format-spec build warning
target/user: Don't free expired command when time out
target/user: Introduce data_bitmap, replace data_length/data_head/data_tail
target/user: Free data ring in unified function
target/user: Use iovec[] to describe continuous area
target: Remove enum transport_lunflags_table
target/iblock: pass WRITE_SAME to device if possible
iser-target: Kill the ->isert_cmd back pointer in struct iser_tx_desc
iser-target: Kill struct isert_rdma_wr
iser-target: Convert to new CQ API
iser-target: Split and properly type the login buffer
iser-target: Remove ISER_RECV_DATA_SEG_LEN
iser-target: Remove impossible condition from isert_wait_conn
iser-target: Remove redundant wait in release_conn
iser-target: Rework connection termination
iser-target: Separate flows for np listeners and connections cma events
iser-target: Add new state ISER_CONN_BOUND to isert_conn
...
This patch converts vhost/scsi pre-allocation of vhost_scsi_cmd
descriptors to use the new alloc_session callback().
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Looking at how callers use this, maybe we should just rename init_used
to vhost_vq_init_access. The _used suffix was a hint that we
access the vq used ring. But maybe what callers care about is
that it must be called after access_ok.
Also, this function manipulates the vq->is_le field which isn't related
to the vq used ring.
This patch simply renames vhost_init_used() to vhost_vq_init_access() as
suggested by Michael.
No behaviour change.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull SCSI target updates from Nicholas Bellinger:
"This series contains HCH's changes to absorb configfs attribute
->show() + ->store() function pointer usage from it's original
tree-wide consumers, into common configfs code.
It includes usb-gadget, target w/ drivers, netconsole and ocfs2
changes to realize the improved simplicity, that now renders the
original include/target/configfs_macros.h CPP magic for fabric drivers
and others, unnecessary and obsolete.
And with common code in place, new configfs attributes can be added
easier than ever before.
Note, there are further improvements in-flight from other folks for
v4.5 code in configfs land, plus number of target fixes for post -rc1
code"
In the meantime, a new user of the now-removed old configfs API came in
through the char/misc tree in commit 7bd1d4093c ("stm class: Introduce
an abstraction for System Trace Module devices").
This merge resolution comes from Alexander Shishkin, who updated his stm
class tracing abstraction to account for the removal of the old
show_attribute and store_attribute methods in commit 517982229f
("configfs: remove old API") from this pull. As Alexander says about
that patch:
"There's no need to keep an extra wrapper structure per item and the
awkward show_attribute/store_attribute item ops are no longer needed.
This patch converts policy code to the new api, all the while making
the code quite a bit smaller and easier on the eyes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>"
That patch was folded into the merge so that the tree should be fully
bisectable.
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits)
configfs: remove old API
ocfs2/cluster: use per-attribute show and store methods
ocfs2/cluster: move locking into attribute store methods
netconsole: use per-attribute show and store methods
target: use per-attribute show and store methods
spear13xx_pcie_gadget: use per-attribute show and store methods
dlm: use per-attribute show and store methods
usb-gadget/f_serial: use per-attribute show and store methods
usb-gadget/f_phonet: use per-attribute show and store methods
usb-gadget/f_obex: use per-attribute show and store methods
usb-gadget/f_uac2: use per-attribute show and store methods
usb-gadget/f_uac1: use per-attribute show and store methods
usb-gadget/f_mass_storage: use per-attribute show and store methods
usb-gadget/f_sourcesink: use per-attribute show and store methods
usb-gadget/f_printer: use per-attribute show and store methods
usb-gadget/f_midi: use per-attribute show and store methods
usb-gadget/f_loopback: use per-attribute show and store methods
usb-gadget/ether: use per-attribute show and store methods
usb-gadget/f_acm: use per-attribute show and store methods
usb-gadget/f_hid: use per-attribute show and store methods
...
Mike Christie