f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.
This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.
EFSBADCRC EBADMSG /* Bad CRC detected */
EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Add and use f2fs_<level> macros
- Convert f2fs_msg to f2fs_printk
- Remove level from f2fs_printk and embed the level in the format
- Coalesce formats and align multi-line arguments
- Remove unnecessary duplicate extern f2fs_msg f2fs.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215https://bugzilla.kernel.org/show_bug.cgi?id=203223https://bugzilla.kernel.org/show_bug.cgi?id=203231https://bugzilla.kernel.org/show_bug.cgi?id=203235https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203227
- Overview
When mounting the attached crafted image, following errors are reported.
Additionally, it hangs on sync after trying to mount it.
The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y
- Reproduces
mkdir test
mount -t f2fs tmp.img test
sync
- Messages
kernel BUG at fs/f2fs/recovery.c:549!
RIP: 0010:recover_data+0x167a/0x1780
Call Trace:
f2fs_recover_fsync_data+0x613/0x710
f2fs_fill_super+0x1043/0x1aa0
mount_bdev+0x16d/0x1a0
mount_fs+0x4a/0x170
vfs_kern_mount+0x5d/0x100
do_mount+0x200/0xcf0
ksys_mount+0x79/0xc0
__x64_sys_mount+0x1c/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
During recovery, if ofs_of_node is inconsistent in between recovered
node page and original checkpointed node page, let's just fail recovery
instead of making kernel panic.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are some places in where we missed to unlock page or unlock page
incorrectly, fix them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For all ordered cases in f2fs_wait_on_page_writeback(), we need to
check PageWriteback status, so let's clean up to relocate the check
into f2fs_wait_on_page_writeback().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In F2FS_HAS_FEATURE(), we will use F2FS_SB(sb) to get sbi pointer to
access .raw_super field, to avoid unneeded pointer conversion, this
patch changes to F2FS_HAS_FEATURE() accept sbi parameter directly.
Just do cleanup, no logic change.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch does below changes to keep consistence of project quota data
in sudden power-cut case:
- update inode.i_projid and project quota atomically under lock_op() in
f2fs_ioc_setproject()
- recover inode.i_projid and project quota in recover_inode()
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For journalled quota mode, let checkpoint to flush dquot dirty data
and quota file data to guarntee persistence of all quota sysfile in
last checkpoint, by this way, we can avoid corrupting quota sysfile
when encountering SPO.
The implementation is as below:
1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is
cached dquot metadata changes in quota subsystem, and later checkpoint
should:
a) flush dquot metadata into quota file.
b) flush quota file to storage to keep file usage be consistent.
2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota
operation failed due to -EIO or -ENOSPC, so later,
a) checkpoint will skip syncing dquot metadata.
b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a
hint for fsck repairing.
3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota
data updating is very heavy, it may cause hungtask in block_operation().
To avoid this, if our retry time exceed threshold, let's just skip
flushing and retry in next checkpoint().
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid warnings and set fsck flag]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +a /mnt/f2fs/file
6. xfs_io -a /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. xfs_io /mnt/f2fs/file
There is no error when opening this file w/o O_APPEND, but actually,
we expect the correct result should be:
/mnt/f2fs/file: Operation not permitted
The root cause is, in recover_inode(), we recover inode->i_flags more
than F2FS_I(inode)->i_flags, so fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch avoids BUG_ON when f2fs_get_meta_page_nofail got EIO during
xfstests/generic/475.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Mark inode dirty explicitly in the end of recover_inode() to make sure
that all recoverable fields can be persisted later.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
inode.i_gc_failures is used to indicate that skip count of migrating
on blocks of inode, we should guarantee it can be recovered in sudden
power-off case.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +A /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr /mnt/f2fs/file
-----------------N- /mnt/f2fs/file
But actually, we expect the corrct result is:
-------A---------N- /mnt/f2fs/file
The reason is we didn't recover inode.i_flags field during mount,
fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Step to reproduce this bug:
1. logon as root
2. mount -t f2fs /dev/sdd /mnt;
3. touch /mnt/file;
4. chown system /mnt/file; chgrp system /mnt/file;
5. xfs_io -f /mnt/file -c "fsync";
6. godown /mnt;
7. umount /mnt;
8. mount -t f2fs /dev/sdd /mnt;
After step 8) we will expect file's uid/gid are all system, but during
recovery, these two fields were not been recovered, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove the verbose license text from f2fs files and replace them with
SPDX tags. This does not change the license of any of the code.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
generic/417 reported as blow:
------------[ cut here ]------------
kernel BUG at /home/yuchao/git/devf2fs/inode.c:695!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21697 Comm: umount Tainted: G W O 4.18.0-rc2+ #39
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
EIP: f2fs_evict_inode+0x556/0x580 [f2fs]
Call Trace:
? _raw_spin_unlock+0x2c/0x50
evict+0xa8/0x170
dispose_list+0x34/0x40
evict_inodes+0x118/0x120
generic_shutdown_super+0x41/0x100
? rcu_read_lock_sched_held+0x97/0xa0
kill_block_super+0x22/0x50
kill_f2fs_super+0x6f/0x80 [f2fs]
deactivate_locked_super+0x3d/0x70
deactivate_super+0x40/0x60
cleanup_mnt+0x39/0x70
__cleanup_mnt+0x10/0x20
task_work_run+0x81/0xa0
exit_to_usermode_loop+0x59/0xa7
do_fast_syscall_32+0x1f5/0x22c
entry_SYSENTER_32+0x53/0x86
EIP: f2fs_evict_inode+0x556/0x580 [f2fs]
It can simply reproduced with scripts:
Enable quota feature during mkfs.
Testcase1:
1. mkfs.f2fs /dev/zram0
2. mount -t f2fs /dev/zram0 /mnt/f2fs
3. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4k" -c "fsync"
4. godown /mnt/f2fs
5. umount /mnt/f2fs
6. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs
7. umount /mnt/f2fs
Testcase2:
1. mkfs.f2fs /dev/zram0
2. mount -t f2fs /dev/zram0 /mnt/f2fs
3. touch /mnt/f2fs/file
4. create process[pid = x] do:
a) open /mnt/f2fs/file;
b) unlink /mnt/f2fs/file
5. godown -f /mnt/f2fs
6. kill process[pid = x]
7. umount /mnt/f2fs
8. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs
9. umount /mnt/f2fs
The reason is: during recovery, i_{c,m}time of inode will be updated, then
the inode can be set dirty w/o being tracked in sbi->inode_list[DIRTY_META]
global list, so later write_checkpoint will not flush such dirty inode into
node page.
Once umount is called, sync_filesystem() in generic_shutdown_super() will
skip syncng dirty inodes due to sb_rdonly check, leaving dirty inodes
there.
To solve this issue, during umount, add remove SB_RDONLY flag in
sb->s_flags, to make sure sync_filesystem() will not be skipped.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When CONFIG_F2FS_FAULT_INJECTION is disabled, we get a warning about an
unused label:
fs/f2fs/segment.c: In function '__submit_discard_cmd':
fs/f2fs/segment.c:1059:1: error: label 'submit' defined but not used [-Werror=unused-label]
This could be fixed by adding another #ifdef around it, but the more
reliable way of doing this seems to be to remove the other #ifdefs
where that is easily possible.
By defining time_to_inject() as a trivial stub, most of the checks for
CONFIG_F2FS_FAULT_INJECTION can go away. This also leads to nicer
formatting of the code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fix wrong message info for recover fsync data
on readonly fs.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If caller of __get_meta_page() can handle error, let's propagate error
from __get_meta_page().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Below dmesg was printed when testing generic/388 of fstest:
F2FS-fs (zram1): find_fsync_dnodes: detect looped node chain, blkaddr:526615, next:526616
F2FS-fs (zram1): Cannot recover all fsync data errno=-22
F2FS-fs (zram1): Mounted with checkpoint version = 22300d0e
F2FS-fs (zram1): find_fsync_dnodes: detect looped node chain, blkaddr:526615, next:526616
F2FS-fs (zram1): Cannot recover all fsync data errno=-22
The reason is that we initialize free_blocks with free blocks of
filesystem, so if filesystem is full, free_blocks can be zero,
below condition will be true, so that, it will fail recovery.
if (++loop_cnt >= free_blocks ||
blkaddr == next_blkaddr_of_node(page))
To fix this issue, initialize free_blocks with correct value which
includes over-privision blocks.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces verify_blkaddr to check meta/data block address
with valid range to detect bug earlier.
In addition, once we encounter an invalid blkaddr, notice user to run
fsck to fix, and let the kernel panic.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- rename is_valid_blkaddr() to is_valid_meta_blkaddr() for readability.
- introduce is_valid_blkaddr() for cleanup.
No logic change in this patch.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Only dir may have F2FS_INLINE_DOTS flag, so there is no need to check
the flag in recover flow.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There is no checksum in node block now, so bit-transition from hardware
can make node_footer.next_blkaddr being corrupted w/o any detection,
result in node chain becoming looped one.
For this condition, during recovery, in order to avoid running into dead
loop, let's detect it and just skip out.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previous dentry page uses highmem, which will cause panic in platforms
using highmem (such as arm), since the address space of dentry pages
from highmem directly goes into the decryption path via the function
fscrypt_fname_disk_to_usr. But sg_init_one assumes the address is not
from highmem, and then cause panic since it doesn't call kmap_high but
kunmap_high is triggered at the end. To fix this problem in a simple
way, this patch avoids to put dentry page in pagecache into highmem.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix coding style]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit d260081ccf ("f2fs: change recovery policy of xattr node block")
removes the use of blkaddr, which is no longer used. So remove the
parameter.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch supports hidden quota files in the system, which will be used for
Android. It requires up-to-date f2fs-tools later than v1.9.0.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to check HOT_DATA to truncate any previous data block when doing
roll-forward recovery.
Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we set CP_ERROR_FLAG in roll-forward error, f2fs is no longer to proceed
any IOs due to f2fs_cp_error(). But, for example, if some stale data is involved
on roll-forward process, we're able to get -ENOENT, getting fs stuck.
If we get any error, let fill_super set SBI_NEED_FSCK and try to recover back
to stable point.
Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to enable f2fs to accept quota information through
mount option:
- {usr,grp,prj}jquota=<quota file path>
- jqfmt=<quota type>
Then, in ->mount flow, we can recover quota file during log replaying,
by this, journelled quota can be supported.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: Fix wrong return values.]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline
to indicate that on-disk structure of current inode is extended.
In order to extend, we changed the inode structure a bit:
Original one:
struct f2fs_inode {
...
struct f2fs_extent i_ext;
__le32 i_addr[DEF_ADDRS_PER_INODE];
__le32 i_nid[DEF_NIDS_PER_INODE];
}
Extended one:
struct f2fs_inode {
...
struct f2fs_extent i_ext;
union {
struct {
__le16 i_extra_isize;
__le16 i_padding;
__le32 i_extra_end[0];
};
__le32 i_addr[DEF_ADDRS_PER_INODE];
};
__le32 i_nid[DEF_NIDS_PER_INODE];
}
Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of
i_addr field for storing i_extra_isize and i_padding. with i_extra_isize,
we can calculate actual size of reserved space in i_addr, available
attribute fields included in total extra attribute fields for current
inode can be described as below:
+--------------------+
| .i_mode |
| ... |
| .i_ext |
+--------------------+
| .i_extra_isize |-----+
| .i_padding | |
| .i_prjid | |
| .i_atime_extra | |
| .i_ctime_extra | |
| .i_mtime_extra |<----+
| .i_inode_cs |<----- store blkaddr/inline from here
| .i_xattr_cs |
| ... |
+--------------------+
| |
| block address |
| |
+--------------------+
| .i_nid |
+--------------------+
| node_footer |
| (nid, ino, offset) |
+--------------------+
Hence, with this patch, we would enhance scalability of f2fs inode for
storing more newly added attribute.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, if we call fsync after updating the xattr date belongs to the
file, f2fs needs to trigger checkpoint to keep xattr data consistent. But,
this policy cause low performance as checkpoint will block most foreground
operations and cause unneeded and unrelated IOs around checkpoint.
This patch will reuse regular file recovery policy for xattr node block,
so, we change to write xattr node block tagged with fsync flag to warm
area instead of cold area, and during recovery, we search warm node chain
for fsynced xattr block, and do the recovery.
So, for below application IO pattern, performance can be improved
obviously:
- touch file
- create/update/delete xattr entry in file
- fsync file
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We use following method to calculate size with current page index:
size = index << PAGE_SHIFT
If type of index has only 32-bits size, left shifting will incur overflow,
which makes result incorrect.
So let's cast index with 64-bits type to avoid such issue.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch remove unused values in function recover_fsync_data
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a file needs to keep its i_size by fallocate, we need to turn off auto
recovery during roll-forward recovery.
This will resolve the below scenario.
1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4096" -c "fsync"
2. xfs_io -f /mnt/f2fs/file -c "falloc -k 4096 4096" -c "fsync"
3. md5sum /mnt/f2fs/file;
4. godown /mnt/f2fs/
5. umount /mnt/f2fs/
6. mount -t f2fs /dev/sdx /mnt/f2fs
7. md5sum /mnt/f2fs/file
Reported-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If i_size is already valid during roll_forward recovery, we should not update
it according to the block alignment.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
i_times of inode will be set with current system time which can be
configured through 'date', so it's not safe to judge dnode block as
garbage data or unchanged inode depend on i_times.
Now, we have used enhanced 'cp_ver + cp' crc method to verify valid
dnode block, so I expect recoverying invalid dnode is almost not
possible.
This reverts commit 807b1e1c8e.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Shouldn't update in-memory i_atime with on-disk i_mtime of inode when
recovering inode.
Shuoran found this bug which is hidden for a long time, honour is belong
to him.
Signed-off-by: Shuoran Liu <liushuoran@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces spinlock to protect updating process of ckpt_flags
field in struct f2fs_checkpoint, it avoids incorrectly updating in race
condition.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: add __is_set_ckpt_flags likewise __set_ckpt_flags]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we used cp_version only to detect recoverable dnodes.
In order to avoid same garbage cp_version, we needed to truncate the next
dnode during checkpoint, resulting in additional discard or data write.
If we can distinguish this by using crc in addition to cp_version, we can
remove this overhead.
There is backward compatibility concern where it changes node_footer layout.
So, this patch introduces a new checkpoint flag, CP_CRC_RECOVERY_FLAG, to
detect new layout. New layout will be activated only when this flag is set.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu