virtio-fs will need unique IDs for FORGET requests from outside
fs/fuse/dev.c. Make the symbol visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will be used by virtio-fs to send init request to fuse server after
initialization of virt queues.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
virtio-fs will need to query the length of fuse_arg lists. Make the symbol
visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
virtio-fs will need to complete requests from outside fs/fuse/dev.c. Make
the symbol visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The size of struct fuse_req was reduced from 392B to 144B on a non-debug
config, thus the sanitize_global_limit() helper was setting a larger
default limit. This doesn't really reflect reduction in the memory used by
requests, since the fields removed from fuse_req were added to fuse_args
derived structs; e.g. sizeof(struct fuse_writepages_args) is 248B, thus
resulting in slightly more memory being used for writepage requests
overalll (due to using 256B slabs).
Make the calculatation ignore the size of fuse_req and use the old 392B
value.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The page array pointers are also duplicated across fuse_args_pages and
fuse_req. Get rid of the fuse_req ones.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
No need to duplicate the argument arrays in fuse_req, so just dereference
req->args instead of copying to the fuse_req internal ones.
This allows further cleanup of the fuse_req structure.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
All requests are now sent with one of the fuse_simple_... helpers. Get rid
of the old api from the fuse internal header.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename fuse_request_send_notify_reply() to fuse_simple_notify_reply() and
convert to passing fuse_args instead of fuse_req.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Since we cannot reserve the request structure up-front, make sure that the
request allocation doesn't fail using __GFP_NOFAIL.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Derive fuse_writepage_args from fuse_io_args.
Sending the request is tricky since it was done with fi->lock held, hence
we must either use atomic allocation or release the lock. Both are
possible so try atomic first and if it fails, release the lock and do the
regular allocation with GFP_NOFS and __GFP_NOFAIL. Both flags are
necessary for correct operation.
Move the page realloc function from dev.c to file.c and convert to using
fuse_writepage_args.
The last caller of fuse_write_fill() is gone, so get rid of it.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The old fuse_read_fill() helper can be deleted, now that the last user is
gone.
The fuse_io_args struct is moved to fuse_i.h so it can be shared between
readdir/read code.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Need to extend fuse_io_args with 'attr_ver' and 'ff' members, that take the
functionality of the same named members in fuse_req.
fuse_short_read() can now take struct fuse_args_pages.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Change of semantics in fuse_async_req_send/fuse_send_(read|write): these
can now return error, in which case the 'end' callback isn't called, so the
fuse_io_args object needs to be freed.
Added verification that the return value is sane (less than or equal to the
requested read/write size).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Create a helper named fuse_simple_background() that is similar to
fuse_simple_request(). Unlike the latter, it returns immediately and calls
the supplied 'end' callback when the reply is received.
The supplied 'args' pointer is stored in 'fuse_req' which allows the
callback to interpret the output arguments decoded from the reply.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Extract a fuse_write_flags() helper that converts ki_flags relevant write
to open flags.
The other parts of fuse_send_write() aren't used in the
fuse_perform_write() case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Derive fuse_io_args from struct fuse_args_pages. This will be used for
both synchronous and asynchronous read/write requests.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will allow the use of this function when converting to the simple api
(which doesn't use fuse_req).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_simple_request() is converted to return length of last (instead of
single) out arg, since FUSE_IOCTL_OUT has two out args, the second of which
is variable length.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_req_pages_alloc() is moved to file.c, since its internal use by the
device code will eventually be removed.
Rename to fuse_pages_alloc() to signify that it's not only usable for
fuse_req page array.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Derive fuse_args_pages from fuse_args. This is used to handle requests
which use pages for input or output. The related flags are added to
fuse_args.
New FR_ALLOC_PAGES flags is added to indicate whether the page arrays in
fuse_req need to be freed by fuse_put_request() or not.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We can use the "force" flag to make sure the DESTROY request is always sent
to userspace. So no need to keep it allocated during the lifetime of the
filesystem.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In some cases it makes no sense to set pid/uid/gid fields in the request
header. Allow fuse_simple_background() to omit these. This is only
required in the "force" case, so for now just WARN if set otherwise.
Fold fuse_get_req_nofail_nopages() into its only caller. Comment is
obsolete anyway.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This will be used by fuse_force_forget().
We can expand fuse_request_send() into fuse_simple_request(). The
FR_WAITING bit has already been set, no need to check.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add 'force' to fuse_args and use fuse_get_req_nofail_nopages() to allocate
the request in that case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of complex games with a reserved request, just use __GFP_NOFAIL.
Both calers (flush, readdir) guarantee that connection was already
initialized, so no need to wait for fc->initialized.
Also remove unneeded clearing of FR_BACKGROUND flag.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
...to make future expansion simpler. The hiearachical structure is a
historical thing that does not serve any practical purpose.
The generated code is excatly the same before and after the patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When IOCB_CMD_POLL is used on the FUSE device, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then fuse_iqueue::waitq.lock.
This may have to wait for fuse_iqueue::waitq.lock to be released by one
of many places that take it with IRQs enabled. Since the IRQ handler
may take kioctx::ctx_lock, lockdep reports that a deadlock is possible.
Fix it by protecting the state of struct fuse_iqueue with a separate
spinlock, and only accessing fuse_iqueue::waitq using the versions of
the waitqueue functions which do IRQ-safe locking internally.
Reproducer:
#include <fcntl.h>
#include <stdio.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <unistd.h>
#include <linux/aio_abi.h>
int main()
{
char opts[128];
int fd = open("/dev/fuse", O_RDWR);
aio_context_t ctx = 0;
struct iocb cb = { .aio_lio_opcode = IOCB_CMD_POLL, .aio_fildes = fd };
struct iocb *cbp = &cb;
sprintf(opts, "fd=%d,rootmode=040000,user_id=0,group_id=0", fd);
mkdir("mnt", 0700);
mount("foo", "mnt", "fuse", 0, opts);
syscall(__NR_io_setup, 1, &ctx);
syscall(__NR_io_submit, ctx, 1, &cbp);
}
Beginning of lockdep output:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
5.3.0-rc5 #9 Not tainted
-----------------------------------------------------
syz_fuse/135 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
000000003590ceda (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline]
000000003590ceda (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1751 [inline]
000000003590ceda (&fiq->waitq){+.+.}, at: __io_submit_one.constprop.0+0x203/0x5b0 fs/aio.c:1825
and this task is already holding:
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:363 [inline]
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1749 [inline]
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one.constprop.0+0x1f4/0x5b0 fs/aio.c:1825
which would create a new lock dependency:
(&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&(&ctx->ctx_lock)->rlock){..-.}
[...]
Reported-by: syzbot+af05535bb79520f95431@syzkaller.appspotmail.com
Reported-by: syzbot+d86c4426a01f60feddc7@syzkaller.appspotmail.com
Fixes: bfe4037e72 ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The unused vfs code can be removed. Don't pass empty subtype (same as if
->parse callback isn't called).
The bits that are left involve determining whether it's permitted to split the
filesystem type string passed in to mount(2). Consequently, this means that we
cannot get rid of the FS_HAS_SUBTYPE flag unless we define that a type string
with a dot in it always indicates a subtype specification.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert the fuse filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The inode parameter in cuse_release() is likely *not* a fuse inode. It's a
small wonder it didn't blow up until now.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
[ This retries commit d4b13963f2 ("fuse: require /dev/fuse reads to have
enough buffer capacity"), which was reverted. In this version we require
only `sizeof(fuse_in_header) + sizeof(fuse_write_in)` instead of 4K for
FUSE request header room, because, contrary to libfuse and kernel client
behaviour, GlusterFS actually provides only so much room for request
header. ]
A FUSE filesystem server queues /dev/fuse sys_read calls to get filesystem
requests to handle. It does not know in advance what would be that request
as it can be anything that client issues - LOOKUP, READ, WRITE, ... Many
requests are short and retrieve data from the filesystem. However WRITE and
NOTIFY_REPLY write data into filesystem.
Before getting into operation phase, FUSE filesystem server and kernel
client negotiate what should be the maximum write size the client will ever
issue. After negotiation the contract in between server/client is that the
filesystem server then should queue /dev/fuse sys_read calls with enough
buffer capacity to receive any client request - WRITE in particular, while
FUSE client should not, in particular, send WRITE requests with >
negotiated max_write payload. FUSE client in kernel and libfuse
historically reserve 4K for request header. However an existing filesystem
server - GlusterFS - was found which reserves only 80 bytes for header room
(= `sizeof(fuse_in_header) + sizeof(fuse_write_in)`).
Since
`sizeof(fuse_in_header) + sizeof(fuse_write_in)` ==
`sizeof(fuse_in_header) + sizeof(fuse_read_in)` ==
`sizeof(fuse_in_header) + sizeof(fuse_notify_retrieve_in)`
is the absolute minimum any sane filesystem should be using for header
room, the contract is that filesystem server should queue sys_reads with
`sizeof(fuse_in_header) + sizeof(fuse_write_in)` + max_write buffer.
If the filesystem server does not follow this contract, what can happen
is that fuse_dev_do_read will see that request size is > buffer size,
and then it will return EIO to client who issued the request but won't
indicate in any way that there is a problem to filesystem server.
This can be hard to diagnose because for some requests, e.g. for
NOTIFY_REPLY which mimics WRITE, there is no client thread that is
waiting for request completion and that EIO goes nowhere, while on
filesystem server side things look like the kernel is not replying back
after successful NOTIFY_RETRIEVE request made by the server.
We can make the problem easy to diagnose if we indicate via error return to
filesystem server when it is violating the contract. This should not
practically cause problems because if a filesystem server is using shorter
buffer, writes to it were already very likely to cause EIO, and if the
filesystem is read-only it should be too following FUSE_MIN_READ_BUFFER
minimum buffer size.
Please see [1] for context where the problem of stuck filesystem was hit
for real (because kernel client was incorrectly sending more than
max_write data with NOTIFY_REPLY; see also previous patch), how the
situation was traced and for more involving patch that did not make it
into the tree.
[1] https://marc.info/?l=linux-fsdevel&m=155057023600853&w=2
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Jakob Unterwurzacher <jakobunt@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull vfs mount updates from Al Viro:
"The first part of mount updates.
Convert filesystems to use the new mount API"
* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
mnt_init(): call shmem_init() unconditionally
constify ksys_mount() string arguments
don't bother with registering rootfs
init_rootfs(): don't bother with init_ramfs_fs()
vfs: Convert smackfs to use the new mount API
vfs: Convert selinuxfs to use the new mount API
vfs: Convert securityfs to use the new mount API
vfs: Convert apparmorfs to use the new mount API
vfs: Convert openpromfs to use the new mount API
vfs: Convert xenfs to use the new mount API
vfs: Convert gadgetfs to use the new mount API
vfs: Convert oprofilefs to use the new mount API
vfs: Convert ibmasmfs to use the new mount API
vfs: Convert qib_fs/ipathfs to use the new mount API
vfs: Convert efivarfs to use the new mount API
vfs: Convert configfs to use the new mount API
vfs: Convert binfmt_misc to use the new mount API
convenience helper: get_tree_single()
convenience helper get_tree_nodev()
vfs: Kill sget_userns()
...
- Create a generic copy_file_range handler and make individual
filesystems responsible for calling it (i.e. no more assuming that
do_splice_direct will work or is appropriate)
- Refactor copy_file_range and remap_range parameter checking where they
are the same
- Install missing copy_file_range parameter checking(!)
- Remove suid/sgid and update mtime like any other file write
- Change the behavior so that a copy range crossing the source file's
eof will result in a short copy to the source file's eof instead of
EINVAL
- Permit filesystems to decide if they want to handle cross-superblock
copy_file_range in their local handlers.
-----BEGIN PGP SIGNATURE-----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=qM44
-----END PGP SIGNATURE-----
Merge tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull copy_file_range updates from Darrick Wong:
"This fixes numerous parameter checking problems and inconsistent
behaviors in the new(ish) copy_file_range system call.
Now the system call will actually check its range parameters
correctly; refuse to copy into files for which the caller does not
have sufficient privileges; update mtime and strip setuid like file
writes are supposed to do; and allows copying up to the EOF of the
source file instead of failing the call like we used to.
Summary:
- Create a generic copy_file_range handler and make individual
filesystems responsible for calling it (i.e. no more assuming that
do_splice_direct will work or is appropriate)
- Refactor copy_file_range and remap_range parameter checking where
they are the same
- Install missing copy_file_range parameter checking(!)
- Remove suid/sgid and update mtime like any other file write
- Change the behavior so that a copy range crossing the source file's
eof will result in a short copy to the source file's eof instead of
EINVAL
- Permit filesystems to decide if they want to handle
cross-superblock copy_file_range in their local handlers"
* tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fuse: copy_file_range needs to strip setuid bits and update timestamps
vfs: allow copy_file_range to copy across devices
xfs: use file_modified() helper
vfs: introduce file_modified() helper
vfs: add missing checks to copy_file_range
vfs: remove redundant checks from generic_remap_checks()
vfs: introduce generic_file_rw_checks()
vfs: no fallback for ->copy_file_range
vfs: introduce generic_copy_file_range()
This reverts commit d4b13963f2.
The commit introduced a regression in glusterfs-fuse.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Like ->write_iter(), we update mtime and strip setuid of dst file before
copy and like ->read_iter(), we update atime of src file after copy.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We want to enable cross-filesystem copy_file_range functionality
where possible, so push the "same superblock only" checks down to
the individual filesystem callouts so they can make their own
decisions about cross-superblock copy offload and fallack to
generic_copy_file_range() for cross-superblock copy.
[Amir] We do not call ->remap_file_range() in case the files are not
on the same sb and do not call ->copy_file_range() in case the files
do not belong to the same filesystem driver.
This changes behavior of the copy_file_range(2) syscall, which will
now allow cross filesystem in-kernel copy. CIFS already supports
cross-superblock copy, between two shares to the same server. This
functionality will now be available via the copy_file_range(2) syscall.
Cc: Steve French <stfrench@microsoft.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we have generic_copy_file_range(), remove it as a fallback
case when offloads fail. This puts the responsibility for executing
fallbacks on the filesystems that implement ->copy_file_range and
allows us to add operational validity checks to
generic_copy_file_range().
Rework vfs_copy_file_range() to call a new do_copy_file_range()
helper to execute the copying callout, and move calls to
generic_file_copy_range() into filesystem methods where they
currently return failures.
[Amir] overlayfs is not responsible of executing the fallback.
It is the responsibility of the underlying filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
sxVEiFZo8ZU9v1IoRb1I
=qU++
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Based on 1 normalized pattern(s):
this file is released under the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 68 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fuse_writeback_range() helper flushes dirty data to the userspace
filesystem.
When the function returns, the WRITE requests for the data in the given
range have all been completed. This is not equivalent to fsync() on the
given range, since the userspace filesystem may not yet have the data on
stable storage.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Prior to sending COPY_FILE_RANGE to userspace filesystem, we must flush all
dirty pages in both the source and destination files.
This patch adds the missing flush of the source file.
Tested on libfuse-3.5.0 with:
libfuse/example/passthrough_ll /mnt/fuse/ -o writeback
libfuse/test/test_syscalls /mnt/fuse/tmp/test
Fixes: 88bc7d5097 ("fuse: add support for copy_file_range()")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In the FOPEN_DIRECT_IO case the write path doesn't call file_remove_privs()
and that means setuid bit is not cleared if unpriviliged user writes to a
file with setuid bit set.
pjdfstest chmod test 12.t tests this and fails.
Fix this by adding a flag to the FUSE_WRITE message that requests clearing
privileges on the given file. This needs
This better than just calling fuse_remove_privs(), because the attributes
may not be up to date, so in that case a write may miss clearing the
privileges.
Test case:
$ passthrough_ll /mnt/pasthrough-mnt -o default_permissions,allow_other,cache=never
$ mkdir /mnt/pasthrough-mnt/testdir
$ cd /mnt/pasthrough-mnt/testdir
$ prove -rv pjdfstests/tests/chmod/12.t
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Do the proper cleanup in case the size check fails.
Tested with xfstests:generic/228
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 0cbade024b ("fuse: honor RLIMIT_FSIZE in fuse_file_fallocate")
Cc: Liu Bo <bo.liu@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # v3.5
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXNpuRwAKCRDh3BK/laaZ
PMq/AP9kLvB97JU2GbzIJq6wOjDV8whPE/a2Knx0fajvW3AEOAD+NQwdZLmVNql7
DkkY8lZ7fVut3TMj8jHhpIbv4P1R1AE=
=qX6f
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
"Add more caching controls for userspace filesystems to use, as well as
bug fixes and cleanups"
* tag 'fuse-update-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: clean up fuse_alloc_inode
fuse: Add ioctl flag for x32 compat ioctl
fuse: Convert fusectl to use the new mount API
fuse: fix changelog entry for protocol 7.9
fuse: fix changelog entry for protocol 7.12
fuse: document fuse_fsync_in.fsync_flags
fuse: Add FOPEN_STREAM to use stream_open()
fuse: require /dev/fuse reads to have enough buffer capacity
fuse: retrieve: cap requested size to negotiated max_write
fuse: allow filesystems to have precise control over data cache
fuse: convert printk -> pr_*
fuse: honor RLIMIT_FSIZE in fuse_file_fallocate
fuse: fix writepages on 32bit
This patch cleans up fuse_alloc_inode function, just simply the code, no
logic change.
Signed-off-by: zhangliguang <zhangliguang@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull vfs inode freeing updates from Al Viro:
"Introduction of separate method for RCU-delayed part of
->destroy_inode() (if any).
Pretty much as posted, except that destroy_inode() stashes
->free_inode into the victim (anon-unioned with ->i_fops) before
scheduling i_callback() and the last two patches (sockfs conversion
and folding struct socket_wq into struct socket) are excluded - that
pair should go through netdev once davem reopens his tree"
* 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits)
orangefs: make use of ->free_inode()
shmem: make use of ->free_inode()
hugetlb: make use of ->free_inode()
overlayfs: make use of ->free_inode()
jfs: switch to ->free_inode()
fuse: switch to ->free_inode()
ext4: make use of ->free_inode()
ecryptfs: make use of ->free_inode()
ceph: use ->free_inode()
btrfs: use ->free_inode()
afs: switch to use of ->free_inode()
dax: make use of ->free_inode()
ntfs: switch to ->free_inode()
securityfs: switch to ->free_inode()
apparmor: switch to ->free_inode()
rpcpipe: switch to ->free_inode()
bpf: switch to ->free_inode()
mqueue: switch to ->free_inode()
ufs: switch to ->free_inode()
coda: switch to ->free_inode()
...
fuse_destroy_inode() is gone - sanity checks that need the stack
trace of the caller get moved into ->evict_inode(), the rest joins
the RCU-delayed part which becomes ->free_inode().
While we are at it, don't just pass the address of what happens
to be the first member of structure to kmem_cache_free() -
get_fuse_inode() is there for purpose and it gives the proper
container_of() use. No behaviour change, but verifying correctness
is easier that way.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently, a CUSE server running on a 64-bit kernel can tell when an ioctl
request comes from a process running a 32-bit ABI, but cannot tell whether
the requesting process is using legacy IA32 emulation or x32 ABI. In
particular, the server does not know the size of the client process's
`time_t` type.
For 64-bit kernels, the `FUSE_IOCTL_COMPAT` and `FUSE_IOCTL_32BIT` flags
are currently set in the ioctl input request (`struct fuse_ioctl_in` member
`flags`) for a 32-bit requesting process. This patch defines a new flag
`FUSE_IOCTL_COMPAT_X32` and sets it if the 32-bit requesting process is
using the x32 ABI. This allows the server process to distinguish between
requests coming from client processes using IA32 emulation or the x32 ABI
and so infer the size of the client process's `time_t` type and any other
IA32/x32 differences.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Convert the fusectl filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The FUSE_FSYNC_DATASYNC flag was introduced by commit b6aeadeda2
("[PATCH] FUSE - file operations") as a magic number. No new values have
been added to fsync_flags since.
Signed-off-by: Alan Somers <asomers@FreeBSD.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Starting from commit 9c225f2655 ("vfs: atomic f_pos accesses as per
POSIX") files opened even via nonseekable_open gate read and write via lock
and do not allow them to be run simultaneously. This can create read vs
write deadlock if a filesystem is trying to implement a socket-like file
which is intended to be simultaneously used for both read and write from
filesystem client. See commit 10dce8af34 ("fs: stream_open - opener for
stream-like files so that read and write can run simultaneously without
deadlock") for details and e.g. commit 581d21a2d0 ("xenbus: fix deadlock
on writes to /proc/xen/xenbus") for a similar deadlock example on
/proc/xen/xenbus.
To avoid such deadlock it was tempting to adjust fuse_finish_open to use
stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags,
but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and write
handlers
https://codesearch.debian.net/search?q=-%3Enonseekable+%3Dhttps://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481
so if we would do such a change it will break a real user.
Add another flag (FOPEN_STREAM) for filesystem servers to indicate that the
opened handler is having stream-like semantics; does not use file position
and thus the kernel is free to issue simultaneous read and write request on
opened file handle.
This patch together with stream_open() should be added to stable kernels
starting from v3.14+. This will allow to patch OSSPD and other FUSE
filesystems that provide stream-like files to return FOPEN_STREAM |
FOPEN_NONSEEKABLE in open handler and this way avoid the deadlock on all
kernel versions. This should work because fuse_finish_open ignores unknown
open flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel that
is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE
is sufficient to implement streams without read vs write deadlock.
Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A FUSE filesystem server queues /dev/fuse sys_read calls to get
filesystem requests to handle. It does not know in advance what would be
that request as it can be anything that client issues - LOOKUP, READ,
WRITE, ... Many requests are short and retrieve data from the
filesystem. However WRITE and NOTIFY_REPLY write data into filesystem.
Before getting into operation phase, FUSE filesystem server and kernel
client negotiate what should be the maximum write size the client will
ever issue. After negotiation the contract in between server/client is
that the filesystem server then should queue /dev/fuse sys_read calls with
enough buffer capacity to receive any client request - WRITE in
particular, while FUSE client should not, in particular, send WRITE
requests with > negotiated max_write payload. FUSE client in kernel and
libfuse historically reserve 4K for request header. This way the
contract is that filesystem server should queue sys_reads with
4K+max_write buffer.
If the filesystem server does not follow this contract, what can happen
is that fuse_dev_do_read will see that request size is > buffer size,
and then it will return EIO to client who issued the request but won't
indicate in any way that there is a problem to filesystem server.
This can be hard to diagnose because for some requests, e.g. for
NOTIFY_REPLY which mimics WRITE, there is no client thread that is
waiting for request completion and that EIO goes nowhere, while on
filesystem server side things look like the kernel is not replying back
after successful NOTIFY_RETRIEVE request made by the server.
We can make the problem easy to diagnose if we indicate via error return to
filesystem server when it is violating the contract. This should not
practically cause problems because if a filesystem server is using shorter
buffer, writes to it were already very likely to cause EIO, and if the
filesystem is read-only it should be too following FUSE_MIN_READ_BUFFER
minimum buffer size.
Please see [1] for context where the problem of stuck filesystem was hit
for real (because kernel client was incorrectly sending more than
max_write data with NOTIFY_REPLY; see also previous patch), how the
situation was traced and for more involving patch that did not make it
into the tree.
[1] https://marc.info/?l=linux-fsdevel&m=155057023600853&w=2
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Jakob Unterwurzacher <jakobunt@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FUSE filesystem server and kernel client negotiate during initialization
phase, what should be the maximum write size the client will ever issue.
Correspondingly the filesystem server then queues sys_read calls to read
requests with buffer capacity large enough to carry request header + that
max_write bytes. A filesystem server is free to set its max_write in
anywhere in the range between [1*page, fc->max_pages*page]. In particular
go-fuse[2] sets max_write by default as 64K, wheres default fc->max_pages
corresponds to 128K. Libfuse also allows users to configure max_write, but
by default presets it to possible maximum.
If max_write is < fc->max_pages*page, and in NOTIFY_RETRIEVE handler we
allow to retrieve more than max_write bytes, corresponding prepared
NOTIFY_REPLY will be thrown away by fuse_dev_do_read, because the
filesystem server, in full correspondence with server/client contract, will
be only queuing sys_read with ~max_write buffer capacity, and
fuse_dev_do_read throws away requests that cannot fit into server request
buffer. In turn the filesystem server could get stuck waiting indefinitely
for NOTIFY_REPLY since NOTIFY_RETRIEVE handler returned OK which is
understood by clients as that NOTIFY_REPLY was queued and will be sent
back.
Cap requested size to negotiate max_write to avoid the problem. This
aligns with the way NOTIFY_RETRIEVE handler works, which already
unconditionally caps requested retrieve size to fuse_conn->max_pages. This
way it should not hurt NOTIFY_RETRIEVE semantic if we return less data than
was originally requested.
Please see [1] for context where the problem of stuck filesystem was hit
for real, how the situation was traced and for more involving patch that
did not make it into the tree.
[1] https://marc.info/?l=linux-fsdevel&m=155057023600853&w=2
[2] https://github.com/hanwen/go-fuse
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Jakob Unterwurzacher <jakobunt@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On networked filesystems file data can be changed externally. FUSE
provides notification messages for filesystem to inform kernel that
metadata or data region of a file needs to be invalidated in local page
cache. That provides the basis for filesystem implementations to invalidate
kernel cache explicitly based on observed filesystem-specific events.
FUSE has also "automatic" invalidation mode(*) when the kernel
automatically invalidates data cache of a file if it sees mtime change. It
also automatically invalidates whole data cache of a file if it sees file
size being changed.
The automatic mode has corresponding capability - FUSE_AUTO_INVAL_DATA.
However, due to probably historical reason, that capability controls only
whether mtime change should be resulting in automatic invalidation or
not. A change in file size always results in invalidating whole data cache
of a file irregardless of whether FUSE_AUTO_INVAL_DATA was negotiated(+).
The filesystem I write[1] represents data arrays stored in networked
database as local files suitable for mmap. It is read-only filesystem -
changes to data are committed externally via database interfaces and the
filesystem only glues data into contiguous file streams suitable for mmap
and traditional array processing. The files are big - starting from
hundreds gigabytes and more. The files change regularly, and frequently by
data being appended to their end. The size of files thus changes
frequently.
If a file was accessed locally and some part of its data got into page
cache, we want that data to stay cached unless there is memory pressure, or
unless corresponding part of the file was actually changed. However current
FUSE behaviour - when it sees file size change - is to invalidate the whole
file. The data cache of the file is thus completely lost even on small size
change, and despite that the filesystem server is careful to accurately
translate database changes into FUSE invalidation messages to kernel.
Let's fix it: if a filesystem, through new FUSE_EXPLICIT_INVAL_DATA
capability, indicates to kernel that it is fully responsible for data cache
invalidation, then the kernel won't invalidate files data cache on size
change and only truncate that cache to new size in case the size decreased.
(*) see 72d0d248ca "fuse: add FUSE_AUTO_INVAL_DATA init flag",
eed2179efe "fuse: invalidate inode mapping if mtime changes"
(+) in writeback mode the kernel does not invalidate data cache on file
size change, but neither it allows the filesystem to set the size due to
external event (see 8373200b12 "fuse: Trust kernel i_size only")
[1] https://lab.nexedi.com/kirr/wendelin.core/blob/a50f1d9f/wcfs/wcfs.go#L20
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Functions, like pr_err, are a more modern variant of printing compared to
printk. They could be used to denoise sources by using needed level in
the print function name, and by automatically inserting per-driver /
function / ... print prefix as defined by pr_fmt macro. pr_* are also
said to be used in Documentation/process/coding-style.rst and more
recent code - for example overlayfs - uses them instead of printk.
Convert CUSE and FUSE to use the new pr_* functions.
CUSE output stays completely unchanged, while FUSE output is amended a
bit for "trying to steal weird page" warning - the second line now comes
also with "fuse:" prefix. I hope it is ok.
Suggested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fstests generic/228 reported this failure that fuse fallocate does not
honor what 'ulimit -f' has set.
This adds the necessary inode_newsize_ok() check.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Fixes: 05ba1f0823 ("fuse: add FALLOCATE operation")
Cc: <stable@vger.kernel.org> # v3.5
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Writepage requests were cropped to i_size & 0xffffffff, which meant that
mmaped writes to any file larger than 4G might be silently discarded.
Fix by storing the file size in a properly sized variable (loff_t instead
of size_t).
Reported-by: Antonio SJ Musumeci <trapexit@spawn.link>
Fixes: 6eaf4782eb ("fuse: writepages: crop secondary requests")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Merge page ref overflow branch.
Jann Horn reported that he can overflow the page ref count with
sufficient memory (and a filesystem that is intentionally extremely
slow).
Admittedly it's not exactly easy. To have more than four billion
references to a page requires a minimum of 32GB of kernel memory just
for the pointers to the pages, much less any metadata to keep track of
those pointers. Jann needed a total of 140GB of memory and a specially
crafted filesystem that leaves all reads pending (in order to not ever
free the page references and just keep adding more).
Still, we have a fairly straightforward way to limit the two obvious
user-controllable sources of page references: direct-IO like page
references gotten through get_user_pages(), and the splice pipe page
duplication. So let's just do that.
* branch page-refs:
fs: prevent page refcount overflow in pipe_buf_get
mm: prevent get_user_pages() from overflowing page refcount
mm: add 'try_get_page()' helper function
mm: make page ref count overflow check tighter and more explicit
Change pipe_buf_get() to return a bool indicating whether it succeeded
in raising the refcount of the page (if the thing in the pipe is a page).
This removes another mechanism for overflowing the page refcount. All
callers converted to handle a failure.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXIdqOwAKCRDh3BK/laaZ
PFRlAP0RZr7vDfGcZTXGApcIr63YDjzi8Gg1/Jhd0jrzLbKcdAD+P0d6bupWWwOl
yGjVxY9LkXNJiTI2Q+Equ7AgMYvDcQk=
=Lvcr
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
"Scalability and performance improvements, as well as minor bug fixes
and cleanups"
* tag 'fuse-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
fuse: cache readdir calls if filesystem opts out of opendir
fuse: support clients that don't implement 'opendir'
fuse: lift bad inode checks into callers
fuse: multiplex cached/direct_io file operations
fuse add copy_file_range to direct io fops
fuse: use iov_iter based generic splice helpers
fuse: Switch to using async direct IO for FOPEN_DIRECT_IO
fuse: use atomic64_t for khctr
fuse: clean up aborted
fuse: Protect ff->reserved_req via corresponding fi->lock
fuse: Protect fi->nlookup with fi->lock
fuse: Introduce fi->lock to protect write related fields
fuse: Convert fc->attr_version into atomic64_t
fuse: Add fuse_inode argument to fuse_prepare_release()
fuse: Verify userspace asks to requeue interrupt that we really sent
fuse: Do some refactoring in fuse_dev_do_write()
fuse: Wake up req->waitq of only if not background
fuse: Optimize request_end() by not taking fiq->waitq.lock
fuse: Kill fasync only if interrupt is queued in queue_interrupt()
fuse: Remove stale comment in end_requests()
...
All users of VM_MAX_READAHEAD actually convert it to kbytes and then to
pages. Define the macro explicitly as (SZ_128K / PAGE_SIZE). This
simplifies the expression in every filesystem. Also rename the macro to
VM_READAHEAD_PAGES to properly convey its meaning. Finally remove unused
VM_MIN_READAHEAD
[akpm@linux-foundation.org: fix fs/io_uring.c, per Stephen]
Link: http://lkml.kernel.org/r/20181221144053.24318-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a filesystem returns ENOSYS from opendir and thus opts out of
opendir and releasedir requests, it almost certainly would also like
readdir results cached. Default open_flags to FOPEN_KEEP_CACHE and
FOPEN_CACHE_DIR in that case.
With this patch, I've measured recursive directory enumeration across
large FUSE mounts to be faster than native mounts.
Signed-off-by: Chad Austin <chadaustin@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Allow filesystems to return ENOSYS from opendir, preventing the kernel from
sending opendir and releasedir messages in the future. This avoids
userspace transitions when filesystems don't need to keep track of state
per directory handle.
A new capability flag, FUSE_NO_OPENDIR_SUPPORT, parallels
FUSE_NO_OPEN_SUPPORT, indicating the new semantics for returning ENOSYS
from opendir.
Signed-off-by: Chad Austin <chadaustin@fb.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Bad inode checks were done done in various places, and move them into
fuse_file_{read|write}_iter().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is cleanup, as well as allowing switching between I/O modes while the
file is open in the future.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Nothing preventing copy_file_range to work on files opened with
FOPEN_DIRECT_IO.
Fixes: 88bc7d5097 ("fuse: add support for copy_file_range()")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The default splice implementation is grossly inefficient and the iter based
ones work just fine, so use those instead. I've measured an 8x speedup for
splice write (with len = 128k).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Switch to using the async directo IO code path in fuse_direct_read_iter()
and fuse_direct_write_iter(). This is especially important in connection
with loop devices with direct IO enabled as loop assumes async direct io is
actually async.
Signed-off-by: Martin Raiber <martin@urbackup.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The only caller that needs fc->aborted set is fuse_conn_abort_write().
Setting fc->aborted is now racy (fuse_abort_conn() may already be in
progress or finished) but there's no reason to care.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is rather natural action after previous patches, and it just decreases
load of fc->lock.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This continues previous patch and introduces the same protection for
nlookup field.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
To minimize contention of fc->lock, this patch introduces a new spinlock
for protection fuse_inode metadata:
fuse_inode:
writectr
writepages
write_files
queued_writes
attr_version
inode:
i_size
i_nlink
i_mtime
i_ctime
Also, it protects the fields changed in fuse_change_attributes_common()
(too many to list).
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch makes fc->attr_version of atomic64_t type, so fc->lock won't be
needed to read or modify it anymore.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Here is preparation for next patches, which introduce new fi->lock for
protection of ff->write_entry linked into fi->write_files.
This patch just passes new argument to the function.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When queue_interrupt() is called from fuse_dev_do_write(), it came from
userspace directly. Userspace may pass any request id, even the request's
we have not interrupted (or even background's request). This patch adds
sanity check to make kernel safe against that.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently, we wait on req->waitq in request_wait_answer() function only,
and it's never used for background requests. Since wake_up() is not a
light-weight macros, instead of this, it unfolds in really called function,
which makes locking operations taking some cpu cycles, let's avoid its call
for the case we definitely know it's completely useless.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We take global fiq->waitq.lock every time, when we are in this function,
but interrupted requests are just small subset of all requests. This patch
optimizes request_end() and makes it to take the lock when it's really
needed.
queue_interrupt() needs small change for that. After req is linked to
interrupt list, we do smp_mb() and check for FR_FINISHED again. In case of
FR_FINISHED bit has appeared, we remove req and leave the function:
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We should sent signal only in case of interrupt is really queued. Not a
real problem, but this makes the code clearer and intuitive.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
It looks like we can optimize page replacement and avoid copying by simple
updating the request's page.
[SzM: swap with new request's tmp page to avoid use after free.]
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Auxiliary requests chained on req->misc.write.next may be leaked on
truncate. Free these as well if the parent request was truncated off.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Don't reuse the queued request, even if it only contains a single page.
This is needed because previous locking changes (spliting out
fiq->waitq.lock from fc->lock) broke the assumption that request will
remain in FR_PENDING at least until the new page contents are copied.
This fix removes a slight optimization for a rare corner case, so we really
shoudln't care.
Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Fixes: fd22d62ed0 ("fuse: no fc->lock for iqueue parts")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Restructure the function to better separate the locked and the unlocked
parts. Use the "old_req" local variable to mean only the queued request,
and not any auxiliary requests added onto its misc.write.next list. These
changes are in preparation for the following patch.
Also turn BUG_ON instances into WARN_ON and add a header comment explaining
what the function does.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Call this from fuse_range_is_writeback() and fuse_writepage_in_flight().
Turn a BUG_ON() into a WARN_ON() in the process.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
NR_WRITEBACK_TEMP is accounted on the temporary page in the request, not
the page cache page.
Fixes: 8b284dc472 ("fuse: writepages: handle same page rewrites")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Some of the pipe_buf_release() handlers seem to assume that the pipe is
locked - in particular, anon_pipe_buf_release() accesses pipe->tmp_page
without taking any extra locks. From a glance through the callers of
pipe_buf_release(), it looks like FUSE is the only one that calls
pipe_buf_release() without having the pipe locked.
This bug should only lead to a memory leak, nothing terrible.
Fixes: dd3bb14f44 ("fuse: support splice() writing to fuse device")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stefan Hajnoczi