[ Upstream commit 2c47c1be51 ]
Before this patch, gfs2_create_inode had a use-after-free for the
iopen glock in some error paths because it did this:
gfs2_glock_put(io_gl);
fail_gunlock2:
if (io_gl)
clear_bit(GLF_INODE_CREATING, &io_gl->gl_flags);
In some cases, the io_gl was used for create and only had one
reference, so the glock might be freed before the clear_bit().
This patch tries to straighten it out by only jumping to the
error paths where iopen is properly set, and moving the
gfs2_glock_put after the clear_bit.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2103913265 upstream.
with the way fs/namei.c:do_last() had been done, ->atomic_open()
instances needed to recognize the case when existing file got
found with O_EXCL|O_CREAT, either by falling back to finish_no_open()
or failing themselves. gfs2 one didn't.
Fixes: 6d4ade986f (GFS2: Add atomic_open support)
Cc: stable@kernel.org # v3.11
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because s_vfs_rename_mutex is not cluster-wide, multiple nodes can
reverse the roles of which directories are "old" and which are "new" for
the purposes of rename. This can cause deadlocks where two nodes end up
waiting for each other.
There can be several layers of directory dependencies across many nodes.
This patch fixes the problem by acquiring all gfs2_rename's inode glocks
asychronously and waiting for all glocks to be acquired. That way all
inodes are locked regardless of the order.
The timeout value for multiple asynchronous glocks is calculated to be
the total of the individual wait times for each glock times two.
Since gfs2_exchange is very similar to gfs2_rename, both functions are
patched in the same way.
A new async glock wait queue, sd_async_glock_wait, keeps a list of
waiters for these events. If gfs2's holder_wake function detects an
async holder, it wakes up any waiters for the event. The waiter only
tests whether any of its requests are still pending.
Since the glocks are sent to dlm asychronously, the wait function needs
to check to see which glocks, if any, were granted.
If a glock is granted by dlm (and therefore held), its minimum hold time
is checked and adjusted as necessary, as other glock grants do.
If the event times out, all glocks held thus far must be dequeued to
resolve any existing deadlocks. Then, if there are any outstanding
locking requests, we need to loop around and wait for dlm to respond to
those requests too. After we release all requests, we return -ESTALE to
the caller (vfs rename) which loops around and retries the request.
Node1 Node2
--------- ---------
1. Enqueue A Enqueue B
2. Enqueue B Enqueue A
3. A granted
6. B granted
7. Wait for B
8. Wait for A
9. A times out (since Node 1 holds A)
10. Dequeue B (since it was granted)
11. Wait for all requests from DLM
12. B Granted (since Node2 released it in step 10)
13. Rename
14. Dequeue A
15. DLM Grants A
16. Dequeue A (due to the timeout and since we
no longer have B held for our task).
17. Dequeue B
18. Return -ESTALE to vfs
19. VFS retries the operation, goto step 1.
This release-all-locks / acquire-all-locks may slow rename / exchange
down as both nodes struggle in the same way and do the same thing.
However, this will only happen when there is contention for the same
inodes, which ought to be rare.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, gfs2_rename added a holder for the rgrp glock to
its array of holders, ghs. There's nothing wrong with that, but this
patch separates it into a separate holder. This is done to ensure
it's always locked last as per the proper glock lock ordering,
and also to pave the way for a future patch in which we will
lock the non-rgrp glocks asynchronously.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Use IS_ERR_OR_NULL where appropriate.
(Several more places converted by Andreas.)
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Based on 1 normalized pattern(s):
this copyrighted material is made available to anyone wishing to use
modify copy or redistribute it subject to the terms and conditions
of the gnu general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 44 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081038.653000175@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In gfs2_create_inode, after setting and releasing the acl / default_acl, the
acl / default_acl pointers are not set to NULL as they should be. In that
state, when the function reaches label fail_free_acls, gfs2_create_inode will
try to release the same acls again.
Fix that by setting the pointers to NULL after releasing the acls. Slightly
simplify the logic. Also, posix_acl_release checks for NULL already, so
there is no need to duplicate those checks here.
Fixes: e01580bf9e ("gfs2: use generic posix ACL infrastructure")
Reported-by: Pan Bian <bianpan2016@163.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
__gfs2_lookup(), gfs2_create_inode(), nfs_finish_open() and fuse_create_open()
don't need 'opened' anymore. Get rid of that argument in those.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Parallel to FILE_CREATED, goes into ->f_mode instead of *opened.
NFS is a bit of a wart here - it doesn't have file at the point
where FILE_CREATED used to be set, so we need to propagate it
there (for now). IMA is another one (here and everywhere)...
Note that this needs do_dentry_open() to leave old bits in ->f_mode
alone - we want it to preserve FMODE_CREATED if it had been already
set (no other bit can be there).
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and don't bother with setting FILE_OPENED at all.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Clean up gfs2_iomap_alloc and gfs2_iomap_get. Document how
gfs2_iomap_alloc works: it now needs to be called separately after
gfs2_iomap_get where necessary; this will be used later by iomap write.
Move gfs2_iomap_ops into bmap.c.
Introduce a new gfs2_iomap_get_alloc helper and use it in
fallocate_chunk: gfs2_iomap_begin will become unsuitable for fallocate
with proper iomap write support.
In gfs2_block_map and fallocate_chunk, zero-initialize struct iomap.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Mark the source inode dirty during a rename instead of just updating the
underlying buffer head. Otherwise, fsync may find the inode clean and
will then skip flushing the journal. A subsequent power failure will
cause the rename to be lost. This happens in command sequences like:
xfs_io -f -c 'pwrite 0 4096' -c 'fsync' foo
mv foo bar
xfs_io -c 'fsync' bar
# power failure
Fixes xfstests generic/322, generic/376.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if function gfs2_unlink failed to get a valid
transaction (for example, not enough journal blocks) it would go
to label out_end_trans which did gfs2_trans_end. But if the
trans_begin failed, there's no transaction to end, and trying to
do so results in: kernel BUG at fs/gfs2/trans.c:117!
This patch changes the goto so that it does not try to end a
non-existent transaction.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add a small inline function for computing the maximum size of a stuffed
inode instead of open coding that in several places throughout the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add support for the STATX_ATTR_ flags in statx. (Compression,
encryption, and the nodump flag are not supported by gfs2.)
Partially fixes xfstest generic/424.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch switches GFS2's implementation of fiemap from the old
block_map code to the new iomap interface.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When inodes are read from disk, GFS2 will only update in-memory atimes
older than the on-disk atimes; this prevents atimes from going
backwards. The atimes of newly allocated inodes are initialized to 0.
This means that when an atime is explicitly set to a negative value,
this value will not persist.
Fix by setting the atime of newly allocated inodes to the lowest
possible value instead of 0.
Fixes xfstest generic/258.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
If function gfs2_create_inode fails after the inode has been
created (for example, if the inode_refresh fails for some reason)
the function was setting gl_object but never clearing it again.
The glocks are left pointing to a freed inode. This patch adds
the calls to clear gl_object in the appropriate error paths.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the inode glock's gl_object was set after a
reference was acquired, but before the block type was verified.
In cases where the block was unlinked, then freed and reused on
another node, a residule delete callback (delete_work) would try
to look up the inode, eventually failing the block check, but
only after it overwrites gl_object with a pointer to the wrong
inode. This patch moves the assignment of gl_object after the
block check so it won't be improperly overwritten.
Likewise, at the end of the function, gfs2_inode_lookup was
clearing gl_object after it unlocked the glock, which meant
another process might free the glock in the meantime. This
patch guards against that case.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch introduces a new helper function in glock.h that
clears gl_object, with an added integrity check. An additional
integrity check has been added to glock_set_object, plus comments.
This is step 1 in a series to ensure gl_object integrity.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
When commit 4fd1a57952 moved the call to flush_delayed_work from
gfs2_evict_inode to gfs2_inode_lookup to avoid calling into DLM during
evict, a similar call should have been added to gfs2_create_inode:
that's another code path in which glocks of previous inodes may be
reused.
The flush of the iopen glock work queue added by 4fd1a57952, on the
other hand, is unnecessary and can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
On failure, keep the inode glock across the final iput of the new inode
so that gfs2_evict_inode doesn't have to re-acquire the glock. That
way, gfs2_evict_inode won't need to revalidate the block type.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Put all remaining accesses to gl->gl_object under the
gl->gl_lockref.lock spinlock to prevent races.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
So far, gfs2_evict_inode clears gl->gl_object and then flushes the glock
work queue to make sure that inode glops which dereference gl->gl_object
have finished running before the inode is destroyed. However, flushing
the work queue may do more work than needed, and in particular, it may
call into DLM, which we want to avoid here. Use a bit lock
(GIF_GLOP_PENDING) to synchronize between the inode glops and
gfs2_evict_inode instead to get rid of the flushing.
In addition, flush the work queues of existing glocks before reusing
them for new inodes to get those glocks into a known state: the glock
state engine currently doesn't handle glock re-appropriation correctly.
(We may be able to fix the glock state engine instead later.)
Based on a patch by Steven Whitehouse <swhiteho@redhat.com>.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Revert commit 86d067a797d4e8546a7c92b985f31e8cd3ec39ad: it turns out
that waiting for iopen glock dequeues here isn't needed anymore because
the bugs that commit was meant to fix have been fixed otherwise.
In addition, we want to avoid waiting on glocks in gfs2_evict_inode in
shrinker context because the shrinker may be invoked on behalf of DLM,
in which case calling into DLM again would deadlock. This commit makes
the described scenario less likely without completely avoiding it; it's
still a step in the right direction, though.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch i_no_addr was not initialized until after the
return from allocating its block. That meant the i_no_addr was
temporarily uninitialized storage. Ordinarily that's not a concern,
but if inplace_reserve can't find space, it can call try_rgrp_unlink
which references i_no_addr as a block to avoid. That can result in
unpredictable behavior. More importantly, the trace point in
gfs2_alloc_blocks references ip->i_no_addr before it is set, which
is misleading when reading the kernel traces. This patch makes it
look like the new dinode block was assigned in the name of inode 0
rather than a random inode that's completely unrelated.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Pull vfs 'statx()' update from Al Viro.
This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.
It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?
From David Howells.
Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:
https://www.spinics.net/lists/linux-fsdevel/msg33831.html
* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.
The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.
Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.
========
OVERVIEW
========
The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.
A number of requests were gathered for features to be included. The
following have been included:
(1) Make the fields a consistent size on all arches and make them large.
(2) Spare space, request flags and information flags are provided for
future expansion.
(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).
(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).
This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].
(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).
(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).
And the following have been left out for future extension:
(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].
Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.
(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).
(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].
(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].
(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).
(10) Extra coherency data may be useful in making backups [Andreas Dilger].
(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).
(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...
(This requires a separate system call - I have an fsinfo() call idea
for this).
(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].
(Deferred to fsinfo).
(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].
(Deferred to fsinfo).
(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).
(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).
(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].
(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).
(16) Femtosecond-resolution timestamps [Dave Chinner].
(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).
(17) A set multiple attributes syscall to go with this.
===============
NEW SYSTEM CALL
===============
The new system call is:
int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);
The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.
Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):
(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.
(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.
(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.
mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.
buffer points to the destination for the data. This must be 256 bytes in
size.
======================
MAIN ATTRIBUTES RECORD
======================
The following structures are defined in which to return the main attribute
set:
struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};
struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};
The defined bits in request_mask and stx_mask are:
STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]
stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.
Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.
The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:
STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs
Within the kernel, the supported flags are listed by:
KSTAT_ATTR_FS_IOC_FLAGS
[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]
New flags include:
STATX_ATTR_AUTOMOUNT Object is an automount trigger
These are for the use of GUI tools that might want to mark files specially,
depending on what they are.
Fields in struct statx come in a number of classes:
(0) stx_dev_*, stx_blksize.
These are local system information and are always available.
(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.
These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.
If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.
If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.
Note that there are instances where the type might not be valid, for
instance Windows reparse points.
(2) stx_rdev_*.
This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.
(3) stx_btime.
Similar to (1), except this will be set to 0 if it doesn't exist.
=======
TESTING
=======
The following test program can be used to test the statx system call:
samples/statx/test-statx.c
Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.
Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.
[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)
Secondly, the result of automounting on that directory.
[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.
Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If .readlink == NULL implies generic_readlink().
Generated by:
to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Pull vfs xattr updates from Al Viro:
"xattr stuff from Andreas
This completes the switch to xattr_handler ->get()/->set() from
->getxattr/->setxattr/->removexattr"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Remove {get,set,remove}xattr inode operations
xattr: Stop calling {get,set,remove}xattr inode operations
vfs: Check for the IOP_XATTR flag in listxattr
xattr: Add __vfs_{get,set,remove}xattr helpers
libfs: Use IOP_XATTR flag for empty directory handling
vfs: Use IOP_XATTR flag for bad-inode handling
vfs: Add IOP_XATTR inode operations flag
vfs: Move xattr_resolve_name to the front of fs/xattr.c
ecryptfs: Switch to generic xattr handlers
sockfs: Get rid of getxattr iop
sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
kernfs: Switch to generic xattr handlers
hfs: Switch to generic xattr handlers
jffs2: Remove jffs2_{get,set,remove}xattr macros
xattr: Remove unnecessary NULL attribute name check
Pull misc vfs updates from Al Viro:
"Assorted misc bits and pieces.
There are several single-topic branches left after this (rename2
series from Miklos, current_time series from Deepa Dinamani, xattr
series from Andreas, uaccess stuff from from me) and I'd prefer to
send those separately"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
proc: switch auxv to use of __mem_open()
hpfs: support FIEMAP
cifs: get rid of unused arguments of CIFSSMBWrite()
posix_acl: uapi header split
posix_acl: xattr representation cleanups
fs/aio.c: eliminate redundant loads in put_aio_ring_file
fs/internal.h: add const to ns_dentry_operations declaration
compat: remove compat_printk()
fs/buffer.c: make __getblk_slow() static
proc: unsigned file descriptors
fs/file: more unsigned file descriptors
fs: compat: remove redundant check of nr_segs
cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
cifs: don't use memcpy() to copy struct iov_iter
get rid of separate multipage fault-in primitives
fs: Avoid premature clearing of capabilities
fs: Give dentry to inode_change_ok() instead of inode
fuse: Propagate dentry down to inode_change_ok()
ceph: Propagate dentry down to inode_change_ok()
xfs: Propagate dentry down to inode_change_ok()
...
These inode operations are no longer used; remove them.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1. Fabian Frederick submitted a nice cleanup that uses the BIT macro
rather than bit shifting.
2. Andreas Gruenbacher contributed a patch that fixes a long-standing
annoyance whereby GFS2 warned about dirty pages.
3. Andreas also fixed a problem with the recent extended attribute
readahead feature.
4. Chao Yu contributed a patch that checks the return code from function
register_shrinker and reacts accordingly. Previously, it was not checked.
5. Andreas Gruenbacher also fixed a problem whereby incore file timestamps
were forgotten if the file was invalidated. This merely moves the
assignment inside the inode glock where it belongs.
6. He also fixed a problem where incore timestamps were not initialized.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX8oqYAAoJENeLYdPf93o7m5YIAIvBQ4WAmMmNuLT0AkvXIKXW
ZHXtV5oizSOl+qOrb5x3ANbnZWZ5NnWRP6E0frDf3Y5wk6U4qWAqU0V8BTbdr2E+
IryOLQ+62CAa4UbHqgQRFCpwkPxEaCsOde7eQh/ppTyBKjP0da7tUvSfPcLrWU+9
qhYiqAv5qVk38JjFiwhw4zER+dOCPDIg1xkkMPG6fspjM8/CkXR9p4lh73qNJT/j
NDzyjHSBYK32lkcb5xagjpLjmN/fIm6gXvdk65bD1euqxfUeuSCg6AF8QWkEXkcB
pbqQVIOWrZixS9HMTqT7w8nNstsBKSrEwQhulZWBZygRAzJJAWu6IaHQ9gZkUsE=
=1Fjo
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've only got six GFS2 patches for this merge window. In patch
order:
- Fabian Frederick submitted a nice cleanup that uses the BIT macro
rather than bit shifting.
- Andreas Gruenbacher contributed a patch that fixes a long-standing
annoyance whereby GFS2 warned about dirty pages.
- Andreas also fixed a problem with the recent extended attribute
readahead feature.
- Chao Yu contributed a patch that checks the return code from
function register_shrinker and reacts accordingly. Previously, it
was not checked.
- Andreas Gruenbacher also fixed a problem whereby incore file
timestamps were forgotten if the file was invalidated. This merely
moves the assignment inside the inode glock where it belongs.
- Andreas also fixed a problem where incore timestamps were not
initialized"
* tag 'gfs2-4.8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Initialize atime of I_NEW inodes
gfs2: Update file times after grabbing glock
gfs2: fix to detect failure of register_shrinker
gfs2: Fix extended attribute readahead optimization
gfs2: Remove dirty buffer warning from gfs2_releasepage
GFS2: use BIT() macro
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.
CURRENT_TIME is also not y2038 safe.
This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.
Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix for commit 719ee344: initialize atime of I_NEW inodes to 0 so that
the timestamps read from disk will always be more recent than the
initial timestamp, and the atime in the I_NEW inode will be set correctly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
In most cases, EPERM is returned on immutable inode, and there're only a
few places returning EACCES. I noticed this when running LTP on
overlayfs, setxattr03 failed due to unexpected EACCES on immutable
inode.
So converting all EACCES to EPERM on immutable inode.
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
of nasty outcomes when inodes are transitioned from the unlinked state
to the free state. Small file systems are particularly vulnerable to these
problems, and it can manifest as mainly hangs, but also file system
corruption. The patches have been tested for literally many weeks, with a
very gruelling test, so I have a high level of confidence.
- Andreas Gruenbacher wrote a series of 5 patches for various lockups
during the transition of inodes from unlinked to free. The main patch
is titled "Fix gfs2_lookup_by_inum lock inversion" and the other 4 are
support and cleanup patches related to that.
- Ben Marzinski contributed 2 patches with regard to a recreatable
problem when gfs2 tries to write a page to a file that is being
truncated, resulting in a BUG() in gfs2_remove_from_journal.
Note that Ben had to export vfs function __block_write_full_page to get
this to work properly. It's been posted a long time and he talked to
various VFS people about it, and nobody seemed to mind.
- I contributed 3 patches. (1) The first one fixes a memory corruptor:
a race in which one process can overwrite the gl_object pointer set by
another process, causing kernel panic and other symptoms. (2) The second
patch fixes another race that resulted in a false-positive BUG_ON. This
occurred when resource group reservations were freed by one process
while another process was trying to grab a new reservation in the same
resource group. (3) The third patch fixes a problem with doing journal
replay when the journals are not all the same size.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXklXIAAoJENeLYdPf93o7AbIIAImLEixK+4CaItEArAKG9TXv
WbO+eDJfo6AOtAteB6+MdX2UxXAHJsCY6RmiEIAi5LzlVFiiCgRo4z/QgDARAw3c
2RxlndElaESh82S27sLiFbgZeY7GZv04C0t6AzMkc830BLXiKMs6bXfeq1fzW8Sf
AgAneACVsX0faRWo/XDuQcK81dwZ+qdOnR2+FvtOSFl1KgV0BrtnsW7IHv+5MIot
SREDN7VvSQwQrLgwMlC0PvhwK3KCVvuO9ZziLEPpYJONESJfEmuCpG265+tUJNTw
dIcW3p/vvgow8fb56fSnAxaeplPLlF9qJCq1M9fWZrKVbHg2uyCZMx4P52Fnmz4=
=uUVs
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"We've got ten patches this time, half of which are related to a
plethora of nasty outcomes when inodes are transitioned from the
unlinked state to the free state. Small file systems are particularly
vulnerable to these problems, and it can manifest as mainly hangs, but
also file system corruption. The patches have been tested for
literally many weeks, with a very gruelling test, so I have a high
level of confidence.
- Andreas Gruenbacher wrote a series of five patches for various
lockups during the transition of inodes from unlinked to free.
The main patch is titled "Fix gfs2_lookup_by_inum lock inversion"
and the other four are support and cleanup patches related to that.
- Ben Marzinski contributed two patches with regard to a recreatable
problem when gfs2 tries to write a page to a file that is being
truncated, resulting in a BUG() in gfs2_remove_from_journal.
Note that Ben had to export vfs function __block_write_full_page to
get this to work properly. It's been posted a long time and he
talked to various VFS people about it, and nobody seemed to mind.
- I contributed 3 patches:
o The first one fixes a memory corruptor: a race in which one
process can overwrite the gl_object pointer set by another
process, causing kernel panic and other symptoms.
o The second patch fixes another race that resulted in a
false-positive BUG_ON. This occurred when resource group
reservations were freed by one process while another process
was trying to grab a new reservation in the same resource
group.
o The third patch fixes a problem with doing journal replay when
the journals are not all the same size"
* tag 'gfs2-4.7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Fix gfs2_replay_incr_blk for multiple journal sizes
GFS2: Check rs_free with rd_rsspin protection
gfs2: writeout truncated pages
fs: export __block_write_full_page
gfs2: Lock holder cleanup
gfs2: Large-filesystem fix for 32-bit systems
gfs2: Get rid of gfs2_ilookup
gfs2: Fix gfs2_lookup_by_inum lock inversion
gfs2: Initialize iopen glock holder for new inodes
GFS2: don't set rgrp gl_object until it's inserted into rgrp tree
->atomic_open() can be given an in-lookup dentry *or* a negative one
found in dcache. Use d_in_lookup() to tell one from another, rather
than d_unhashed().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make the code more readable by cleaning up the different ways of
initializing lock holders and checking for initialized lock holders:
mark lock holders as uninitialized by setting the holder's glock to NULL
(gfs2_holder_mark_uninitialized) instead of zeroing out the entire
object or using a separate flag. Recognize initialized holders by their
non-NULL glock (gfs2_holder_initialized). Don't zero out holder objects
which are immeditiately initialized via gfs2_holder_init or
gfs2_glock_nq_init.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Commit ff34245d switched from iget5_locked to iget_locked among other
things, but iget_locked doesn't work for filesystems larger than 2^32
blocks on 32-bit systems. Switch back to iget5_locked. Filesystems
larger than 2^32 blocks are unrealistic to work well on 32-bit systems,
so this is mostly a code cleanliness fix.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Bob Peterson