Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SUNRPC has two sorts of credentials, both of which appear as
"struct rpc_cred".
There are "generic credentials" which are supplied by clients
such as NFS and passed in 'struct rpc_message' to indicate
which user should be used to authorize the request, and there
are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS
which describe the credential to be sent over the wires.
This patch replaces all the generic credentials by 'struct cred'
pointers - the credential structure used throughout Linux.
For machine credentials, there is a special 'struct cred *' pointer
which is statically allocated and recognized where needed as
having a special meaning. A look-up of a low-level cred will
map this to a machine credential.
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The page cache offers the ability to search for a miss in the previous or
next N locations. Rather than teach the XArray about the page cache's
definition of a miss, use xas_prev() and xas_next() to search the page
array. This should be more efficient as it does not have to start the
lookup from the top for each index.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Warning level 2 was used: -Wimplicit-fallthrough=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
"dev->nr_children" is the number of children which were parsed
successfully in bl_parse_stripe(). It could be all of them and then, in
that case, it is equal to v->stripe.volumes_count. Either way, the >
should be >= so that we don't go beyond the end of what we're supposed
to.
Fixes: 5c83746a0c ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
It's possible that the device map is smaller than the offset into the device
for the I/O we're adding. Add a check for it and bail out, otherwise we
risk botching the bio calculations that follow.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trondmy@gmail.com>
PNFS block/SCSI layouts should gracefully handle cases where block devices
are not available when a layout is retrieved, or the block devices are
removed while the client holds a layout.
While setting up a layout segment, keep a record of an unavailable or
un-parsable block device in cache with a flag so that subsequent layouts do
not spam the server with GETDEVINFO. We can reuse the current
NFS_DEVICEID_UNAVAILABLE handling with one variation: instead of reusing
the device, we will discard it and send a fresh GETDEVINFO after the
timeout, since the lookup and validation of the device occurs within the
GETDEVINFO response handling.
A lookup of a layout segment that references an unavailable device will
return a segment with the NFS_LSEG_UNAVAILABLE flag set. This will allow
the pgio layer to mark the layout with the appropriate fail bit, which
forces subsequent IO to the MDS, and prevents spamming the server with
LAYOUTGET, LAYOUTRETURN.
Finally, when IO to a block device fails, look up the block device(s)
referenced by the pgio header, and mark them as unavailable.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If there's an error doing I/O to block device, and the client resends the
I/O to the MDS, the MDS must recall the layout from the client before
processing the I/O. Let's preempt that exchange by returning the layout
before falling back to the MDS when there's an error.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The blocklayout module contains the client support for both block and SCSI
layouts. Add a module alias for the SCSI layout type so that the module
will be loaded for SCSI layouts.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that %z is standartised in C99 there is no reason to support %Z.
Unlike %L it doesn't even make format strings smaller.
Use BUILD_BUG_ON in a couple ATM drivers.
In case anyone didn't notice lib/vsprintf.o is about half of SLUB which
is in my opinion is quite an achievement. Hopefully this patch inspires
someone else to trim vsprintf.c more.
Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 41963c10c4 sets the block layout's
last written byte to the offset of the end of the extent rather than the
end of the write which incorrectly updates the inode's size for
partial-page writes.
Fixes: 41963c10c4 ("pnfs/blocklayout: update last_write_offset atomically with extents")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Block/SCSI layout write completion may add committable extents to the
extent tree before updating the layout's last-written byte under the inode
lock. If a sync happens before this value is updated, then
prepare_layoutcommit may find and encode these extents which would produce
a LAYOUTCOMMIT request whose encoded extents are larger than the request's
loca_length.
Fix this by using a last-written byte value that is updated atomically with
the extent tree so that commitable extents always match.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Highlights include:
Stable bugfixes:
- nfs: don't create zero-length requests
- Several LAYOUTGET bugfixes
Features:
- Several performance related features
- More aggressive caching when we can rely on close-to-open cache
consistency
- Remove serialisation of O_DIRECT reads and writes
- Optimise several code paths to not flush to disk unnecessarily. However
allow for the idiosyncracies of pNFS for those layout types that need
to issue a LAYOUTCOMMIT before the metadata can be updated on the server.
- SUNRPC updates to the client data receive path
- pNFS/SCSI support RH/Fedora dm-mpath device nodes
- pNFS files/flexfiles can now use unprivileged ports when the generic NFS
mount options allow it.
Bugfixes:
- Don't use RDMA direct data placement together with data integrity or
privacy security flavours
- Remove the RDMA ALLPHYSICAL memory registration mode as it has potential
security holes.
- Several layout recall fixes to improve NFSv4.1 protocol compliance.
- Fix an Oops in the pNFS files and flexfiles connection setup to the DS
- Allow retry of operations that used a returned delegation stateid
- Don't mark the inode as revalidated if a LAYOUTCOMMIT is outstanding
- Fix writeback races in nfs4_copy_range() and nfs42_proc_deallocate()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WNyE
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- nfs: don't create zero-length requests
- several LAYOUTGET bugfixes
Features:
- several performance related features
- more aggressive caching when we can rely on close-to-open
cache consistency
- remove serialisation of O_DIRECT reads and writes
- optimise several code paths to not flush to disk unnecessarily.
However allow for the idiosyncracies of pNFS for those layout
types that need to issue a LAYOUTCOMMIT before the metadata can
be updated on the server.
- SUNRPC updates to the client data receive path
- pNFS/SCSI support RH/Fedora dm-mpath device nodes
- pNFS files/flexfiles can now use unprivileged ports when
the generic NFS mount options allow it.
Bugfixes:
- Don't use RDMA direct data placement together with data
integrity or privacy security flavours
- Remove the RDMA ALLPHYSICAL memory registration mode as
it has potential security holes.
- Several layout recall fixes to improve NFSv4.1 protocol
compliance.
- Fix an Oops in the pNFS files and flexfiles connection
setup to the DS
- Allow retry of operations that used a returned delegation
stateid
- Don't mark the inode as revalidated if a LAYOUTCOMMIT is
outstanding
- Fix writeback races in nfs4_copy_range() and
nfs42_proc_deallocate()"
* tag 'nfs-for-4.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (104 commits)
pNFS: Actively set attributes as invalid if LAYOUTCOMMIT is outstanding
NFSv4: Clean up lookup of SECINFO_NO_NAME
NFSv4.2: Fix warning "variable ‘stateids’ set but not used"
NFSv4: Fix warning "no previous prototype for ‘nfs4_listxattr’"
SUNRPC: Fix a compiler warning in fs/nfs/clnt.c
pNFS: Remove redundant smp_mb() from pnfs_init_lseg()
pNFS: Cleanup - do layout segment initialisation in one place
pNFS: Remove redundant stateid invalidation
pNFS: Remove redundant pnfs_mark_layout_returned_if_empty()
pNFS: Clear the layout metadata if the server changed the layout stateid
pNFS: Cleanup - don't open code pnfs_mark_layout_stateid_invalid()
NFS: pnfs_mark_matching_lsegs_return() should match the layout sequence id
pNFS: Do not set plh_return_seq for non-callback related layoutreturns
pNFS: Ensure layoutreturn acts as a completion for layout callbacks
pNFS: Fix CB_LAYOUTRECALL stateid verification
pNFS: Always update the layout barrier seqid on LAYOUTGET
pNFS: Always update the layout stateid if NFS_LAYOUT_INVALID_STID is set
pNFS: Clear the layout return tracking on layout reinitialisation
pNFS: LAYOUTRETURN should only update the stateid if the layout is valid
nfs: don't create zero-length requests
...
When bl_parse_deviceid() fails in bl_alloc_deviceid_node() on
blkdev_get_by_*() step we get an pnfs_block_dev struct that is
uninitialized except for bdev field which is set to whatever error
blkdev_get_by_*() returns. bl_free_device() then tries to call
blkdev_put() if bdev is not 0 resulting in a wrong pointer dereference.
Fixing this by setting bdev in struct pnfs_block_dev only if we didn't
get an error from blkdev_get_by_*().
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The last put of deviceid nodes for SCSI layouts may sleep, so we shouldn't
hold any spinlocks. Make sure we put them outside the bl_ext_lock.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Avoid a bad nfs server return an unaligned length of signature.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead of reusing the wwn-* names for multipath devices nodes RHEL and
Fedora introduce new dm-mpath-uuid-* nodes with a slightly different
naming scheme. Try these names first to ensure we always get a
multipath-capable device if it exists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The current code works with the standard udev/systemd names, but we'll have
to add another method in the next patch. Refactor it into a separate helper
to make room for the new variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This was fixed for the original block layout code a while ago, but also
needs to be fixed for the SCSI layout path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch converts the simple bi_rw use cases in the block,
drivers, mm and fs code to set/get the bio operation using
bio_set_op_attrs/bio_op
These should be simple one or two liner cases, so I just did them
in one patch. The next patches handle the more complicated
cases in a module per patch.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
Note this pull request also includes the client side of SCSI layout,
with Trond's permission.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MToz
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux
Pull more nfsd updates from Bruce Fields:
"Apologies for the previous request, which omitted the top 8 commits
from my for-next branch (including the SCSI layout commits). Thanks
to Trond for spotting my error!"
This actually includes the new layout types, so here's that part of
the pull message repeated:
"Support for a new pnfs layout type from Christoph Hellwig. The new
layout type is a variant of the block layout which uses SCSI features
to offer improved fencing and device identification.
Note this pull request also includes the client side of SCSI layout,
with Trond's permission"
* tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux:
nfsd: use short read as well as i_size to set eof
nfsd: better layoutupdate bounds-checking
nfsd: block and scsi layout drivers need to depend on CONFIG_BLOCK
nfsd: add SCSI layout support
nfsd: move some blocklayout code
nfsd: add a new config option for the block layout driver
nfs/blocklayout: add SCSI layout support
nfs4.h: add SCSI layout definitions
Only treat write goes up to the inode size as aligned request,
because it always write PAGE_CACHE_SIZE, but read a dynamic size.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This is a trivial extension to the block layout driver to support the
new SCSI layouts draft. There are three changes:
- device identifcation through the SCSI VPD page. This allows us to
directly use the udev generated persistent device names instead of
requiring an expensive lookup by crawling every block device node
in /dev and reading a signature for it.
- use of SCSI persistent reservations to protect device access and
allow for robust fencing. On the client sides this just means
registering and unregistering a server supplied key.
- an optimized LAYOUTCOMMIT payload that doesn't send unessecary
fields to the server.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Blocklayout uses file offset for the read-back page's offset of first writing,
it's definitely wrong, it writes data to bad address of page that cause userspace
application segment fault. It must be the page base stored in header->args.pgbase.
Also, the pg_offset has no influence with isect and extent length.
Note: The offset of the non-first page is always zero.
Ps: A test program will segment fault at read() as,
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
int main(int argc, char **argv)
{
char buf[2049];
char *filename = NULL;
int fd = -1;
if (argc < 2) {
printf("Usage: %s filename\n", argv[0]);
return 0;
}
filename = argv[1];
fd = open(filename, O_RDONLY | O_DIRECT);
if (fd < 0) {
printf("Open %s fail: %m\n", filename);
return 1;
}
lseek(fd, 2048, SEEK_SET);
if (read(fd, buf, sizeof(buf) - 1) != (sizeof(buf) - 1))
printf("Read 4096 bityes data from %s fail: %m\n", filename);
out:
close(fd);
return 0;
}
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Highlights include:
Stable patches:
- Fix atomicity of pNFS commit list updates
- Fix NFSv4 handling of open(O_CREAT|O_EXCL|O_RDONLY)
- nfs_set_pgio_error sometimes misses errors
- Fix a thinko in xs_connect()
- Fix borkage in _same_data_server_addrs_locked()
- Fix a NULL pointer dereference of migration recovery ops for v4.2 client
- Don't let the ctime override attribute barriers.
- Revert "NFSv4: Remove incorrect check in can_open_delegated()"
- Ensure flexfiles pNFS driver updates the inode after write finishes
- flexfiles must not pollute the attribute cache with attrbutes from the DS
- Fix a protocol error in layoutreturn
- Fix a protocol issue with NFSv4.1 CLOSE stateids
Bugfixes + cleanups
- pNFS blocks bugfixes from Christoph
- Various cleanups from Anna
- More fixes for delegation corner cases
- Don't fsync twice for O_SYNC/IS_SYNC files
- Fix pNFS and flexfiles layoutstats bugs
- pnfs/flexfiles: avoid duplicate tracking of mirror data
- pnfs: Fix layoutget/layoutreturn/return-on-close serialisation issues.
- pnfs/flexfiles: error handling retries a layoutget before fallback to MDS
Features:
- Full support for the OPEN NFS4_CREATE_EXCLUSIVE4_1 mode from Kinglong
- More RDMA client transport improvements from Chuck
- Removal of the deprecated ib_reg_phys_mr() and ib_rereg_phys_mr() verbs
from the SUNRPC, Lustre and core infiniband tree.
- Optimise away the close-to-open getattr if there is no cached data
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=knJA
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable patches:
- Fix atomicity of pNFS commit list updates
- Fix NFSv4 handling of open(O_CREAT|O_EXCL|O_RDONLY)
- nfs_set_pgio_error sometimes misses errors
- Fix a thinko in xs_connect()
- Fix borkage in _same_data_server_addrs_locked()
- Fix a NULL pointer dereference of migration recovery ops for v4.2
client
- Don't let the ctime override attribute barriers.
- Revert "NFSv4: Remove incorrect check in can_open_delegated()"
- Ensure flexfiles pNFS driver updates the inode after write finishes
- flexfiles must not pollute the attribute cache with attrbutes from
the DS
- Fix a protocol error in layoutreturn
- Fix a protocol issue with NFSv4.1 CLOSE stateids
Bugfixes + cleanups
- pNFS blocks bugfixes from Christoph
- Various cleanups from Anna
- More fixes for delegation corner cases
- Don't fsync twice for O_SYNC/IS_SYNC files
- Fix pNFS and flexfiles layoutstats bugs
- pnfs/flexfiles: avoid duplicate tracking of mirror data
- pnfs: Fix layoutget/layoutreturn/return-on-close serialisation
issues
- pnfs/flexfiles: error handling retries a layoutget before fallback
to MDS
Features:
- Full support for the OPEN NFS4_CREATE_EXCLUSIVE4_1 mode from
Kinglong
- More RDMA client transport improvements from Chuck
- Removal of the deprecated ib_reg_phys_mr() and ib_rereg_phys_mr()
verbs from the SUNRPC, Lustre and core infiniband tree.
- Optimise away the close-to-open getattr if there is no cached data"
* tag 'nfs-for-4.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (108 commits)
NFSv4: Respect the server imposed limit on how many changes we may cache
NFSv4: Express delegation limit in units of pages
Revert "NFS: Make close(2) asynchronous when closing NFS O_DIRECT files"
NFS: Optimise away the close-to-open getattr if there is no cached data
NFSv4.1/flexfiles: Clean up ff_layout_write_done_cb/ff_layout_commit_done_cb
NFSv4.1/flexfiles: Mark the layout for return in ff_layout_io_track_ds_error()
nfs: Remove unneeded checking of the return value from scnprintf
nfs: Fix truncated client owner id without proto type
NFSv4.1/flexfiles: Mark layout for return if the mirrors are invalid
NFSv4.1/flexfiles: RW layouts are valid only if all mirrors are valid
NFSv4.1/flexfiles: Fix incorrect usage of pnfs_generic_mark_devid_invalid()
NFSv4.1/flexfiles: Fix freeing of mirrors
NFSv4.1/pNFS: Don't request a minimal read layout beyond the end of file
NFSv4.1/pnfs: Handle LAYOUTGET return values correctly
NFSv4.1/pnfs: Don't ask for a read layout for an empty file.
NFSv4.1: Fix a protocol issue with CLOSE stateids
NFSv4.1/flexfiles: Don't mark the entire deviceid as bad for file errors
SUNRPC: Prevent SYN+SYNACK+RST storms
SUNRPC: xs_reset_transport must mark the connection as disconnected
NFSv4.1/pnfs: Ensure layoutreturn reserves space for the opaque payload
...
We generally want to read and write to a block device that's used by
the pNFS block layout client (and even if it's read only the server
has no way of telling us). Add FMODE_WRITE to the mode argument
so that we don't incorrectly tell the block driver that we want a
read-only open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead of overwriting kernel memory reject too long signatures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We need to replace the __be32 with a void pointer to do proper arithmentics
on the virtual addresses so that we can get the right page pointers.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We need to include the first u32 for the number of entries. Add a helper
for the calculation instead of opencoding it so that it's in one place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The LAYOUTCOMMIT operation means different things to different layout types.
For blocks and objects, it is both a data and metadata consistency operation.
For files and flexfiles, it is only a metadata consistency operation.
This patch separates out the 2 cases, allowing the files/flexfiles layout
drivers to optimise away the data consistency calls to layoutcommit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use of synchronize_rcu() when unmounting and potentially freeing a lot
of deviceids is problematic. There really is no reason why we can't just
use kfree_rcu() here.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This is needed to support mirrored writes - the first write can't just
trash the lseg, we need to keep it around until all mirrors have
written.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Pull VFS changes from Al Viro:
"First pile out of several (there _definitely_ will be more). Stuff in
this one:
- unification of d_splice_alias()/d_materialize_unique()
- iov_iter rewrite
- killing a bunch of ->f_path.dentry users (and f_dentry macro).
Getting that completed will make life much simpler for
unionmount/overlayfs, since then we'll be able to limit the places
sensitive to file _dentry_ to reasonably few. Which allows to have
file_inode(file) pointing to inode in a covered layer, with dentry
pointing to (negative) dentry in union one.
Still not complete, but much closer now.
- crapectomy in lustre (dead code removal, mostly)
- "let's make seq_printf return nothing" preparations
- assorted cleanups and fixes
There _definitely_ will be more piles"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
copy_from_iter_nocache()
new helper: iov_iter_kvec()
csum_and_copy_..._iter()
iov_iter.c: handle ITER_KVEC directly
iov_iter.c: convert copy_to_iter() to iterate_and_advance
iov_iter.c: convert copy_from_iter() to iterate_and_advance
iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
iov_iter.c: convert iov_iter_zero() to iterate_and_advance
iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
iov_iter.c: iterate_and_advance
iov_iter.c: macros for iterating over iov_iter
kill f_dentry macro
dcache: fix kmemcheck warning in switch_names
new helper: audit_file()
nfsd_vfs_write(): use file_inode()
ncpfs: use file_inode()
kill f_dentry uses
lockd: get rid of ->f_path.dentry->d_sb
...
Use the number of pages in the pagecache mapping instead of the
number of pnfs requests which is only slightly related.
Reported-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Commit 3a6fd1f004 (pnfs/blocklayout: remove read-modify-write handling
in bl_write_pagelist) introduced a bogus assignment pg_index = pg_index
in variable initialization. AFAICS it's just a typo so remove it.
Spotted by Coverity (id 1248711).
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
Hansen)
- Various sched/idle refinements for better idle handling (Nicolas
Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)
- sched/numa updates and optimizations (Rik van Riel)
- sysbench speedup (Vincent Guittot)
- capacity calculation cleanups/refactoring (Vincent Guittot)
- Various cleanups to thread group iteration (Oleg Nesterov)
- Double-rq-lock removal optimization and various refactorings
(Kirill Tkhai)
- various sched/deadline fixes
... and lots of other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
sched/fair: Delete resched_cpu() from idle_balance()
sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
sched: Improve sysbench performance by fixing spurious active migration
sched/x86: Fix up typo in topology detection
x86, sched: Add new topology for multi-NUMA-node CPUs
sched/rt: Use resched_curr() in task_tick_rt()
sched: Use rq->rd in sched_setaffinity() under RCU read lock
sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
sched: Use dl_bw_of() under RCU read lock
sched/fair: Remove duplicate code from can_migrate_task()
sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
sched: print_rq(): Don't use tasklist_lock
sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
sched: Fix the task-group check in tg_has_rt_tasks()
sched/fair: Leverage the idle state info when choosing the "idlest" cpu
sched: Let the scheduler see CPU idle states
sched/deadline: Fix inter- exclusive cpusets migrations
sched/deadline: Clear dl_entity params when setscheduling to different class
sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
...
Thomas Gleixner