[ Upstream commit 249bd9087a ]
AIO+DIO can extend the file size on IO completion, and it holds
no inode locks while the IO is in flight. Therefore, a race
condition exists in file size updates if we do something like this:
aio-thread fallocate-thread
lock inode
submit IO beyond inode->i_size
unlock inode
.....
lock inode
break layouts
if (off + len > inode->i_size)
new_size = off + len
.....
inode_dio_wait()
<blocks>
.....
completes
inode->i_size updated
inode_dio_done()
....
<wakes>
<does stuff no long beyond EOF>
if (new_size)
xfs_vn_setattr(inode, new_size)
Yup, that attempt to extend the file size in the fallocate code
turns into a truncate - it removes the whatever the aio write
allocated and put to disk, and reduced the inode size back down to
where the fallocate operation ends.
Fundamentally, xfs_file_fallocate() not compatible with racing
AIO+DIO completions, so we need to move the inode_dio_wait() call
up to where the lock the inode and break the layouts.
Secondly, storing the inode size and then using it unchecked without
holding the ILOCK is not safe; we can only do such a thing if we've
locked out and drained all IO and other modification operations,
which we don't do initially in xfs_file_fallocate.
It should be noted that some of the fallocate operations are
compound operations - they are made up of multiple manipulations
that may zero data, and so we may need to flush and invalidate the
file multiple times during an operation. However, we only need to
lock out IO and other space manipulation operations once, as that
lockout is maintained until the entire fallocate operation has been
completed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bc3b5e4b7 ]
Make sure we release resources properly if we cannot clean out the COW
extents in preparation for an extent swap.
Fixes: 96987eea53 ("xfs: cancel COW blocks before swapext")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
To ensure that all blocks touched by the range [offset, offset + count)
are allocated, we need to calculate the block count from the difference
of the range end (rounded up) and the range start (rounded down).
Before this patch, we just round up the byte count, which may lead to
unaligned ranges not being fully allocated:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..7]: 1396264..1396271
1: [8..15]: hole
There should not be a hole there. Instead, the first two blocks should
be fully allocated.
With this patch applied, the result is something like this:
$ touch test_file
$ block_size=$(stat -fc '%S' test_file)
$ fallocate -o $((block_size / 2)) -l $block_size test_file
$ xfs_bmap test_file
test_file:
0: [0..15]: 11024..11039
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This function isn't a macro anymore, so remove various superflous braces,
and explicit cast that is done implicitly due to the return value, use
a normal if statement instead of trying to squeeze everything together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the return value from the functions that schedule deferred bmap
operations since they never fail and do not return status.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are several functions which take a flag argument that is
only ever passed as "0," so remove these arguments.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_prepare_shift() fails to check the error return from
xfs_flush_unmap_range(). If the latter fails, that could lead to an
insert/collapse range operation over a delalloc range, which is not
supported.
Add an error check and return appropriately. This is reproduced
rarely by generic/475.
Fixes: 7f9f71be84 ("xfs: extent shifting doesn't fully invalidate page cache")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add a mode where XFS never overwrites existing blocks in place. This
is to aid debugging our COW code, and also put infatructure in place
for things like possible future support for zoned block devices, which
can't support overwrites.
This mode is enabled globally by doing a:
echo 1 > /sys/fs/xfs/debug/always_cow
Note that the parameter is global to allow running all tests in xfstests
easily in this mode, which would not easily be possible with a per-fs
sysfs file.
In always_cow mode persistent preallocations are disabled, and fallocate
will fail when called with a 0 mode (with our without
FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space
when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE.
There are a few interesting xfstests failures when run in always_cow
mode:
- generic/392 fails because the bytes used in the file used to test
hole punch recovery are less after the log replay. This is
because the blocks written and then punched out are only freed
with a delay due to the logging mechanism.
- xfs/170 will fail as the already fragile file streams mechanism
doesn't seem to interact well with the COW allocator
- xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim
the file system is badly fragmented, but there is not much we
can do to avoid that when always writing out of place
- xfs/205 fails because overwriting a file in always_cow mode
will require new space allocation and the assumption in the
test thus don't work anymore.
- xfs/326 fails to modify the file at all in always_cow mode after
injecting the refcount error, leading to an unexpected md5sum
after the remount, but that again is expected
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit e53c4b598, I *tried* to teach xfs to force writeback when we
fzero/fpunch right up to EOF so that if EOF is in the middle of a page,
the post-EOF part of the page gets zeroed before we return to userspace.
Unfortunately, I missed the part where PAGE_MASK is ~(PAGE_SIZE - 1),
which means that we totally fail to zero if we're fpunching and EOF is
within the first page. Worse yet, the same PAGE_MASK thinko plagues the
filemap_write_and_wait_range call, so we'd initiate writeback of the
entire file, which (mostly) masked the thinko.
Drop the tricky PAGE_MASK and replace it with correct usage of PAGE_SIZE
and the proper rounding macros.
Fixes: e53c4b598 ("xfs: ensure post-EOF zeroing happens after zeroing part of a file")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
On a sub-page block size filesystem, fsx is failing with a data
corruption after a series of operations involving copying a file
with the destination offset beyond EOF of the destination of the file:
8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW
8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes)
8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400
8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE
8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00
The second copy here is beyond EOF, and it is to sub-page (4k) but
block aligned (1k) offset. The clone runs the EOF zeroing, landing
in a pre-existing post-eof delalloc extent. This zeroes the post-eof
extents in the page cache just fine, dirtying the pages correctly.
The problem is that xfs_reflink_remap_prep() now truncates the page
cache over the range that it is copying it to, and rounds that down
to cover the entire start page. This removes the dirty page over the
delalloc extent from the page cache without having written it back.
Hence later, when the page cache is flushed, the page at offset
0x6f000 has not been written back and hence exposes stale data,
which fsx trips over less than 10 operations later.
Fix this by changing xfs_reflink_remap_prep() to use
xfs_flush_unmap_range().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The extent shifting code uses a flush and invalidate mechainsm prior
to shifting extents around. This is similar to what
xfs_free_file_space() does, but it doesn't take into account things
like page cache vs block size differences, and it will fail if there
is a page that it currently busy.
xfs_flush_unmap_range() handles all of these cases, so just convert
xfs_prepare_shift() to us that mechanism rather than having it's own
special sauce.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The option to enable unwritten extents was made default in 2003,
removed from mkfs in 2007, and cannot be disabled in v5. We also
rely on it for a lot of common functionality, so filesystems without
it will run a completely untested and buggy code path. Enabling the
support also is a simple bit flip using xfs_db, so legacy file
systems can still be brought forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This function is only used to punch out delayed allocations on I/O
failure, which means we need to have read the extents earlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that deferred operations are completely managed via
transactions, it's no longer necessary to cancel the dfops in error
paths that already cancel the associated transaction. There are a
few such calls lingering throughout the codebase.
Remove all remaining unnecessary calls to xfs_defer_cancel(). This
leaves xfs_defer_cancel() calls in two places. The first is the call
in the transaction cancel path itself, which facilitates this patch.
The second is made via the xfs_defer_finish() error path to provide
consistent error semantics with transaction commit. For example,
xfs_trans_commit() expects an xfs_defer_finish() failure to clean up
the dfops structure before it returns.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The majority of remaining references to struct xfs_defer_ops in XFS
are associated with xfs_defer_add(). At this point, there are no
more external xfs_defer_ops users left. All instances of
xfs_defer_ops are embedded in the transaction, which means we can
safely pass the transaction down to the dfops add interface.
Update xfs_defer_add() to receive the transaction as a parameter.
Various subsystems implement wrappers to allocate and construct the
context specific data structures for the associated deferred
operation type. Update these to also carry the transaction down as
needed and clean up unused dfops parameters along the way.
This removes most of the remaining references to struct
xfs_defer_ops throughout the code and facilitates removal of the
structure.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[darrick: fix unused variable warnings with ftrace disabled]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current semantics of xfs_defer_finish() require the caller to
call xfs_defer_cancel() on error. This is slightly inconsistent with
transaction commit error handling where a failed commit cleans up
the transaction before returning.
More significantly, the only requirement for exposure of
->dop_pending outside of xfs_defer_finish() is so that
xfs_defer_cancel() can drain it on error. Since the only recourse of
xfs_defer_finish() errors is cancellation, mirror the transaction
logic and cancel remaining dfops before returning from
xfs_defer_finish() with an error.
Beside simplifying xfs_defer_finish() semantics, this ensures that
xfs_defer_finish() always returns with an empty ->dop_pending and
thus facilitates removal of the list from xfs_defer_ops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Inodes that are held across deferred operations are explicitly
joined to the dfops structure to ensure appropriate relogging.
While inodes are currently joined explicitly, we can detect the
conditions that require relogging at dfops finish time by inspecting
the transaction item list for inodes with ili_lock_flags == 0.
Replace the xfs_defer_ijoin() infrastructure with such detection and
automatic relogging of held inodes. This eliminates the need for the
per-dfops inode list, replaced by an on-stack variant in
xfs_defer_trans_roll().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Log items that require relogging during deferred operations
processing are explicitly joined to the associated dfops via the
xfs_defer_*join() helpers. These calls imply that the associated
object is "held" by the transaction such that when rolled, the item
can be immediately joined to a follow up transaction. For buffers,
this means the buffer remains locked and held after each roll. For
inodes, this means that the inode remains locked.
Failure to join a held item to the dfops structure means the
associated object pins the tail of the log while dfops processing
completes, because the item never relogs and is not unlocked or
released until deferred processing completes.
Currently, all buffers that are held in transactions (XFS_BLI_HOLD)
with deferred operations are explicitly joined to the dfops. This is
not the case for inodes, however, as various contexts defer
operations to transactions with held inodes without explicit joins
to the associated dfops (and thus not relogging).
While this is not a catastrophic problem, it is not ideal. Given
that we want to eventually relog such items automatically during
dfops processing, start by explicitly adding these missing
xfs_defer_ijoin() calls. A call is added everywhere an inode is
joined to a transaction without transferring lock ownership and
said transaction runs deferred operations.
All xfs_defer_ijoin() calls will eventually be replaced by automatic
dfops inode relogging. This patch essentially implements the
behavior change that would otherwise occur due to automatic inode
dfops relogging.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have a few places that already check if an inode has actual data in
the COW fork to avoid work on reflink inodes that do not actually have
outstanding COW blocks. There are a few more places that can avoid
working if doing the same check, so add a documented helper for this
condition and use it in all places where it makes sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Every caller of xfs_defer_finish() now passes the transaction and
its associated ->t_dfops. The xfs_defer_ops parameter is therefore
no longer necessary and can be removed.
Since most xfs_defer_finish() callers also have to consider
xfs_defer_cancel() on error, update the latter to also receive the
transaction for consistency. The log recovery code contains an
outlier case that cancels a dfops directly without an available
transaction. Retain an internal wrapper to support this outlier case
for the time being.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At this point, the transaction subsystem completely manages deferred
items internally such that the common and boilerplate
xfs_trans_alloc() -> xfs_defer_init() -> xfs_defer_finish() ->
xfs_trans_commit() sequence can be replaced with a simple
transaction allocation and commit.
Remove all such boilerplate deferred ops code. In doing so, we
change each case over to use the dfops in the transaction and
specifically eliminate:
- The on-stack dfops and associated xfs_defer_init() call, as the
internal dfops is initialized on transaction allocation.
- xfs_bmap_finish() calls that precede a final xfs_trans_commit() of
a transaction.
- xfs_defer_cancel() calls in error handlers that precede a
transaction cancel.
The only deferred ops calls that remain are those that are
non-deterministic with respect to the final commit of the associated
transaction or are open-coded due to special handling.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_itruncate_extents[_flags]() uses a local dfops with a
transaction provided by the caller. It uses hacky ->t_dfops
replacement logic to avoid stomping over an already populated
->t_dfops.
The latter never occurs for current callers and the logic itself is
not really appropriate. Clean this up by updating all callers to
initialize a dfops and to use that down in xfs_itruncate_extents().
This more closely resembles the upcoming logic where dfops will be
embedded within the transaction. We can also replace the
xfs_defer_init() in the xfs_itruncate_extents_flags() loop with an
assert. Both dfops and firstblock should be in a valid state
after xfs_defer_finish() and the inode joined to the dfops is fixed
throughout the loop.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make use of the swap macro and remove some unnecessary variables.
This makes the code easier to read and maintain. Also, reduces the
stack usage.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All but one caller of xfs_defer_init() passes in the ->t_firstblock
of the associated transaction. The one outlier is
xlog_recover_process_intents(), which simply passes a dummy value
because a valid pointer is required. This firstblock variable can
simply be removed.
At this point we could remove the xfs_defer_init() firstblock
parameter and initialize ->t_firstblock directly. Even that is not
necessary, however, because ->t_firstblock is automatically
reinitialized in the new transaction on a transaction roll. Since
xfs_defer_init() should never occur more than once on a particular
transaction (since the corresponding finish will roll it), replace
the reinit from xfs_defer_init() with an assert that verifies the
transaction has a NULLFSBLOCK firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The only callers pass ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers pass ->t_firstblock from the current transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All callers pass ->t_firstblock from the current transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert all xfs_bunmapi() callers to ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert all xfs_bmapi_write() users to ->t_firstblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Most callers of xfs_defer_init() immediately attach the dfops
structure to a transaction. Add a transaction parameter to eliminate
much of this boilerplate code. This also helps self-document the
fact that many codepaths now expect a dfops pointer implicitly via
xfs_trans->t_dfops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_swap_extent_rmap() uses a local dfops instance with a
transaction from the caller. Since there is only one caller, pull
the dfops structure into the caller and attach it to the
transaction. This avoids the need to clear ->t_dfops to prevent
invalid stack memory access.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use ->t_dfops for the collapse and insert range transactions. These
are the only callers of the respective bmap helpers, so replace the
unnecessary dfops parameters with direct accesses to ->t_dfops.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that all xfs_bunmapi() callers use ->t_dfops, remove the
unnecessary parameter and access ->t_dfops directly. This patch does
not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use ->t_dfops for all remaining xfs_bunmapi() callers. This prepares
the latter to no longer require a dfops parameter.
Note that xfs_itruncate_extents_flags() associates a local dfops
with a transaction provided from the caller. Since there are
multiple callers, set and reset ->t_dfops before the function
returns to avoid exposure of stack memory to the caller.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that all callers use ->t_dfops, the xfs_bmapi_write() dfops
parameter is no longer necessary. Remove it and access ->t_dfops
directly. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Attach ->t_dfops for all remaining callers of xfs_bmapi_write().
This prepares the latter to no longer require a separate dfops
parameter.
Note that xfs_symlink() already uses ->t_dfops. Fix up the local
references for consistency.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both callers want the same looking, so do it only once.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If a user asks us to zero_range part of a file, the end of the range is
EOF, and not aligned to a page boundary, invoke writeback of the EOF
page to ensure that the post-EOF part of the page is zeroed. This
ensures that we don't expose stale memory contents via mmap, if in a
clumsy manner.
Found by running generic/127 when it runs zero_range and mapread at EOF
one after the other.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Zorro Lang reports that generic/485 blows an assert on a filesystem with
512 byte blocks. The test tries to fallocate a post-eof extent at the
maximum file size and calls insert range to shift the extents right by
two blocks. On a 512b block filesystem this causes startoff to overflow
the 54-bit startoff field, leading to the assert.
Therefore, always check the rightmost extent to see if it would overflow
prior to invoking the insert range machinery.
Reported-by: zlang@redhat.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200137
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Instead of using xfs_bmapi_read to find delalloc extents and then punch
them out using xfs_bunmapi, opencode the loop to iterate over the extents
and call xfs_bmap_del_extent_delay directly. This both simplifies the
code and reduces the number of extent tree lookups required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
do_mod() is a hold-over from when we have different sizes for file
offsets and and other internal values for 40 bit XFS filesystems.
Hence depending on build flags variables passed to do_mod() could
change size. We no longer support those small format filesystems and
hence everything is of fixed size theses days, even on 32 bit
platforms.
As such, we can convert all the do_mod() callers to platform
optimised modulus operations as defined by linux/math64.h.
Individual conversions depend on the types of variables being used.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The changes to skip discards of speculative preallocation and
unwritten extents introduced several new wrapper functions through
the bunmapi -> extent free codepath to reduce churn in all of the
associated callers. In several cases, these wrappers simply toggle a
single flag to skip or not skip discards for the resulting blocks.
The explicit _nodiscard() wrappers for such an isolated set of
callers is a bit overkill. Kill off these wrappers and replace with
the calls to the underlying functions in the contexts that need to
control discard behavior. Retain the wrappers that preserve the
original calling conventions to serve the original purpose of
reducing code churn.
This is a refactoring patch and does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The flags argument is always zero, get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We've had reports of online discard operations being sent from XFS
on write-only workloads. These discards occur as a result of
eofblocks trims that can occur after a large file copy completes.
These discards are slightly confusing for users who might be paying
close attention to online discards (i.e., vdo) due to performance
sensitivity. They also happen to be spurious because freed post-eof
blocks by definition have not been written to during the current
allocation cycle.
Update xfs_free_eofblocks() to skip discards that are purely
attributed to eofblocks trims. This cuts down the number of spurious
discards that may occur on write-only workloads due to normal
preallocation activity.
Note that discards of post-eof extents can still occur from other
codepaths that do not isolate handling of post-eof blocks from those
within eof. For example, file unlinks and truncates may still cause
discards for any file blocks affected by the operation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Dave Chinner