[ Upstream commit 3499ba8198 ]
For a while, event channel notification via the PCI platform device
has been broken, because we attempt to communicate with xenstore before
we even have notifications working, with the xs_reset_watches() call
in xs_init().
We tend to get away with this on Xen versions below 4.0 because we avoid
calling xs_reset_watches() anyway, because xenstore might not cope with
reading a non-existent key. And newer Xen *does* have the vector
callback support, so we rarely fall back to INTX/GSI delivery.
To fix it, clean up a bit of the mess of xs_init() and xenbus_probe()
startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM
case, deferring it to be called from xenbus_probe() in the XS_HVM case
instead.
Then fix up the invocation of xenbus_probe() to happen either from its
device_initcall if the callback is available early enough, or when the
callback is finally set up. This means that the hack of calling
xenbus_probe() from a workqueue after the first interrupt, or directly
from the PCI platform device setup, is no longer needed.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3dc86ca6b4 upstream.
This commit adds a counter of pending messages for each watch in the
struct. It is used to skip unnecessary pending messages lookup in
'unregister_xenbus_watch()'. It could also be used in 'will_handle'
callback.
This is part of XSA-349
Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e85d32b1c upstream.
Some code does not directly make 'xenbus_watch' object and call
'register_xenbus_watch()' but use 'xenbus_watch_path()' instead. This
commit adds support of 'will_handle' callback in the
'xenbus_watch_path()' and it's wrapper, 'xenbus_watch_pathfmt()'.
This is part of XSA-349
Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fed1755b11 upstream.
If handling logics of watch events are slower than the events enqueue
logic and the events can be created from the guests, the guests could
trigger memory pressure by intensively inducing the events, because it
will create a huge number of pending events that exhausting the memory.
Fortunately, some watch events could be ignored, depending on its
handler callback. For example, if the callback has interest in only one
single path, the watch wouldn't want multiple pending events. Or, some
watches could ignore events to same path.
To let such watches to volutarily help avoiding the memory pressure
situation, this commit introduces new watch callback, 'will_handle'. If
it is not NULL, it will be called for each new event just before
enqueuing it. Then, if the callback returns false, the event will be
discarded. No watch is using the callback for now, though.
This is part of XSA-349
Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54c9de8989 upstream.
In order to avoid tight event channel related IRQ loops add a new
framework of "late EOI" handling: the IRQ the event channel is bound
to will be masked until the event has been handled and the related
driver is capable to handle another event. The driver is responsible
for unmasking the event channel via the new function xen_irq_lateeoi().
This is similar to binding an event channel to a threaded IRQ, but
without having to structure the driver accordingly.
In order to support a future special handling in case a rogue guest
is sending lots of unsolicited events, add a flag to xen_irq_lateeoi()
which can be set by the caller to indicate the event was a spurious
one.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add i2c backend frontend support.
The transaction only support one msg each time.
The frontend sends a request to backend, backend use i2c_transfer
to do real transaction to hardware and return the results to frontend.
Now i2cdump/get/set works.
In domu cfg file, use
"vi2c = ['backend=0,be-adapter=5a800000.i2c,addr=0x51;0x44']" to
create a dummy controller in frontend and allowed slaves in backend.
Currently the slave address check not added, it will be supported in
furture patch.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Leonard Crestez <leonard.crestez@nxp.com>
Introduce i2cif from xen. This will be used by paravirtualization
i2c driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Leonard Crestez <leonard.crestez@nxp.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXZbQhwAKCRCAXGG7T9hj
vh03AP9mOLNY8r16u6a+Iy0YVccTaeiQiquG6HgFVEGX2Ki38gD/Xf5u6bPRYBts
uSRL/eYDvtfU4YGGMjogn20Fdzhc5Ak=
=EkVp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes and cleanups from Juergen Gross:
- a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some
cases, plus a follow-on cleanup series for that driver
- a patch for introducing non-blocking EFI callbacks in Xen's EFI
driver, plu a cleanup patch for Xen EFI handling merging the x86 and
ARM arch specific initialization into the Xen EFI driver
- a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning
up after a user process has died
- a fix for Xen on ARM after removal of ZONE_DMA
- a cleanup patch for avoiding build warnings for Xen on ARM
* tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: fix self-deadlock after killing user process
xen/efi: have a common runtime setup function
arm: xen: mm: use __GPF_DMA32 for arm64
xen/balloon: Clear PG_offline in balloon_retrieve()
xen/balloon: Mark pages PG_offline in balloon_append()
xen/balloon: Drop __balloon_append()
xen/balloon: Set pages PageOffline() in balloon_add_region()
ARM: xen: unexport HYPERVISOR_platform_op function
xen/efi: Set nonblocking callbacks
Today the EFI runtime functions are setup in architecture specific
code (x86 and arm), with the functions themselves living in drivers/xen
as they are not architecture dependent.
As the setup is exactly the same for arm and x86 move the setup to
drivers/xen, too. This at once removes the need to make the single
functions global visible.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
[boris: "Dropped EXPORT_SYMBOL_GPL(xen_efi_runtime_setup)"]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Now that we know we always have the dma-noncoherent.h helpers available
if we are on an architecture with support for non-coherent devices,
we can just call them directly, and remove the calls to the dma-direct
routines, including the fact that we call the dma_direct_map_page
routines but ignore the value returned from it. Instead we now have
Xen wrappers for the arch_sync_dma_for_{device,cpu} helpers that call
the special Xen versions of those routines for foreign pages.
Note that the new helpers get the physical address passed in addition
to the dma address to avoid another translation for the local cache
maintainance. The pfn_valid checks remain on the dma address as in
the old code, even if that looks a little funny.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
xen_dma_map_page uses a different and more complicated check for foreign
pages than the other three cache maintainance helpers. Switch it to the
simpler pfn_valid method a well, and document the scheme with a single
improved comment in xen_dma_map_page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
arm and arm64 can just use xen_swiotlb_dma_ops directly like x86, no
need for a pointer indirection.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Shared the duplicate arm/arm64 code in include/xen/arm/page-coherent.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Building the privcmd code as a loadable module on ARM, we get
a link error due to the private cache management functions:
ERROR: "__sync_icache_dcache" [drivers/xen/xen-privcmd.ko] undefined!
Move the code into a new that is always built in when Xen is enabled,
as suggested by Juergen Gross and Boris Ostrovsky.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
The Xen tmem (transcendent memory) driver can be removed, as the
related Xen hypervisor feature never made it past the "experimental"
state and will be removed in future Xen versions (>= 4.13).
The xen-selfballoon driver depends on tmem, so it can be removed, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When binding an interdomain event channel to a vcpu via
IOCTL_EVTCHN_BIND_INTERDOMAIN not only the event channel needs to be
bound, but the affinity of the associated IRQi must be changed, too.
Otherwise the IRQ and the event channel won't be moved to another vcpu
in case the original vcpu they were bound to is going offline.
Cc: <stable@vger.kernel.org> # 4.13
Fixes: c48f64ab47 ("xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_biovec_phys_mergeable() only needs .bv_page of the 2nd bio bvec
for checking if the two bvecs can be merged, so pass page to
xen_biovec_phys_mergeable() directly.
No function change.
Cc: ris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: xen-devel@lists.xenproject.org
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA
DMA mapping operations stored in the struct device arch data.
Switching arm64 to use the direct calls for the merged DMA direct /
swiotlb code broke this scheme. Replace the indirect calls with
direct-calls in xen-swiotlb as well to fix this problem.
Fixes: 356da6d0cd ("dma-mapping: bypass indirect calls for dma-direct")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
based frontends. Currently the frontends which implement
similar code for sharing big buffers between frontend and
backend are para-virtualized DRM and sound drivers.
Both define the same way to share grant references of a
data buffer with the corresponding backend with little
differences.
Move shared code into a helper module, so there is a single
implementation of the same functionality for all.
This patch introduces code which is used by sound and display
frontend drivers without functional changes with the intention
to remove shared code from the corresponding drivers.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The start info structure that is defined as part of the x86/HVM direct boot
ABI and used for starting Xen PVH guests would be more versatile if it also
included a way to pass information about the memory map to the guest. This
would allow KVM guests to share the same entry point.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
We need to refactor PVH entry code so that support for other hypervisors
like Qemu/KVM can be added more easily.
This patch moves the small block of code used for initializing Xen PVH
virtual machines into the Xen specific file. This initialization is not
going to be needed for Qemu/KVM guests. Moving it out of the common file
is going to allow us to compile kernels in the future without CONFIG_XEN
that are still capable of being booted as a Qemu/KVM guest via the PVH
entry point.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
This reverts commit b3cf8528bb.
That commit unintentionally broke Xen balloon memory hotplug with
"hotplug_unpopulated" set to 1. As long as "System RAM" resource
got assigned under a new "Unusable memory" resource in IO/Mem tree
any attempt to online this memory would fail due to general kernel
restrictions on having "System RAM" resources as 1st level only.
The original issue that commit has tried to workaround fa564ad963
("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f,
60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move
and shrink AMD 64-bit window to avoid conflict") which made the
original fix to Xen ballooning unnecessary.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_create_contiguous_region has now only an implementation if
CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but
we do have an implementation of xen_create_contiguous_region which is
required for swiotlb-xen to work correctly (although it just sets
*dma_handle).
Cc: <stable@vger.kernel.org> # 4.12
Fixes: 1662439081 ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds")
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: Jeff.Kubascik@dornerworks.com
CC: Jarvis.Roach@dornerworks.com
CC: Nathan.Studer@dornerworks.com
CC: vkuznets@redhat.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: julien.grall@arm.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull x86 paravirt updates from Ingo Molnar:
"Two main changes:
- Remove no longer used parts of the paravirt infrastructure and put
large quantities of paravirt ops under a new config option
PARAVIRT_XXL=y, which is selected by XEN_PV only. (Joergen Gross)
- Enable PV spinlocks on Hyperv (Yi Sun)"
* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Enable PV qspinlock for Hyper-V
x86/hyperv: Add GUEST_IDLE_MSR support
x86/paravirt: Clean up native_patch()
x86/paravirt: Prevent redefinition of SAVE_FLAGS macro
x86/xen: Make xen_reservation_lock static
x86/paravirt: Remove unneeded mmu related paravirt ops bits
x86/paravirt: Move the Xen-only pv_mmu_ops under the PARAVIRT_XXL umbrella
x86/paravirt: Move the pv_irq_ops under the PARAVIRT_XXL umbrella
x86/paravirt: Move the Xen-only pv_cpu_ops under the PARAVIRT_XXL umbrella
x86/paravirt: Move items in pv_info under PARAVIRT_XXL umbrella
x86/paravirt: Introduce new config option PARAVIRT_XXL
x86/paravirt: Remove unused paravirt bits
x86/paravirt: Use a single ops structure
x86/paravirt: Remove clobbers from struct paravirt_patch_site
x86/paravirt: Remove clobbers parameter from paravirt patch functions
x86/paravirt: Make paravirt_patch_call() and paravirt_patch_jmp() static
x86/xen: Add SPDX identifier in arch/x86/xen files
x86/xen: Link platform-pci-unplug.o only if CONFIG_XEN_PVHVM
x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.c
x86/xen: Move pv irq related functions under CONFIG_XEN_PV umbrella
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rc6' into for-4.20/block
Merge -rc6 in, for two reasons:
1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
they aren't in the 4.20 branch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v4.19-rc6': (780 commits)
Linux 4.19-rc6
MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
cpufreq: qcom-kryo: Fix section annotations
perf/core: Add sanity check to deal with pinned event failure
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
selftests/powerpc: Fix Makefiles for headers_install change
blk-mq: I/O and timer unplugs are inverted in blktrace
dax: Fix deadlock in dax_lock_mapping_entry()
x86/boot: Fix kexec booting failure in the SEV bit detection code
bcache: add separate workqueue for journal_write to avoid deadlock
drm/amd/display: Fix Edid emulation for linux
drm/amd/display: Fix Vega10 lightup on S3 resume
drm/amdgpu: Fix vce work queue was not cancelled when suspend
Revert "drm/panel: Add device_link from panel device to DRM device"
xen/blkfront: When purging persistent grants, keep them in the buffer
clocksource/drivers/timer-atmel-pit: Properly handle error cases
block: fix deadline elevator drain for zoned block devices
ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Having multiple externs in arch headers is not a good way to provide
a common interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.
Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).
Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also
enabled by default), controlling default value for the new runtime
switch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
All functions in arch/x86/xen/irq.c and arch/x86/xen/xen-asm*.S are
specific to PV guests. Include them in the kernel with CONFIG_XEN_PV only.
Make the PV specific code in arch/x86/entry/entry_*.S dependent on
CONFIG_XEN_PV instead of CONFIG_XEN.
The HVM specific code should depend on CONFIG_XEN_PVHVM.
While at it reformat the Makefile to make it more readable.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: virtualization@lists.linux-foundation.org
Cc: akataria@vmware.com
Cc: rusty@rustcorp.com.au
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20180828074026.820-2-jgross@suse.com
Pull input updates from Dmitry Torokhov:
- a new driver for Rohm BU21029 touch controller
- new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free
- updates to Atmel, eeti. pxrc and iforce drivers
- assorted driver cleanups and fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
MAINTAINERS: Add PhoenixRC Flight Controller Adapter
Input: do not use WARN() in input_alloc_absinfo()
Input: mark expected switch fall-throughs
Input: raydium_i2c_ts - use true and false for boolean values
Input: evdev - switch to bitmap API
Input: gpio-keys - switch to bitmap_zalloc()
Input: elan_i2c_smbus - cast sizeof to int for comparison
bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()
md: Avoid namespace collision with bitmap API
dm: Avoid namespace collision with bitmap API
Input: pm8941-pwrkey - add resin entry
Input: pm8941-pwrkey - abstract register offsets and event code
Input: iforce - reorganize joystick configuration lists
Input: atmel_mxt_ts - move completion to after config crc is updated
Input: atmel_mxt_ts - don't report zero pressure from T9
Input: atmel_mxt_ts - zero terminate config firmware file
Input: atmel_mxt_ts - refactor config update code to add context struct
Input: atmel_mxt_ts - config CRC may start at T71
Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM
Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE
...
Extend grant table module API to allow allocating buffers that can
be used for DMA operations and mapping foreign grant references
on top of those.
The resulting buffer is similar to the one allocated by the balloon
driver in that proper memory reservation is made by
({increase|decrease}_reservation and VA mappings are updated if
needed).
This is useful for sharing foreign buffers with HW drivers which
cannot work with scattered buffers provided by the balloon driver,
but require DMAable memory instead.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Memory {increase|decrease}_reservation and VA mappings update/reset
code used in balloon driver can be made common, so other drivers can
also re-use the same functionality without open-coding.
Create a dedicated file for the shared code and export corresponding
symbols for other kernel modules.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Make set/clear page private code shared and accessible to
other kernel modules which can re-use these instead of open-coding.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCWy0LEwAKCRCAXGG7T9hj
vgbIAQD0rMLgEvvpdyvYpaHEBj9w40olCNh8ur49FRSPAdfh/QEArOtqO0OM+6ju
RGmsIr/A4C8L80HPN4u/iIWXqJDbJwA=
=DnvK
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains the following fixes/cleanups:
- the removal of a BUG_ON() which wasn't necessary and which could
trigger now due to a recent change
- a correction of a long standing bug happening very rarely in Xen
dom0 when a hypercall buffer from user land was not accessible by
the hypervisor for very short periods of time due to e.g. page
migration or compaction
- usage of EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() in a
Xen-related driver (no breakage possible as using those symbols
without others already exported via EXPORT-SYMBOL_GPL() wouldn't
make any sense)
- a simplification for Xen PVH or Xen ARM guests
- some additional error handling for callers of xenbus_printf()"
* tag 'for-linus-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Remove unnecessary BUG_ON from __unbind_from_irq()
xen: add new hypercall buffer mapping device
xen/scsiback: add error handling for xenbus_printf
scsi: xen-scsifront: add error handling for xenbus_printf
xen/grant-table: Export gnttab_{alloc|free}_pages as GPL
xen: add error handling for xenbus_printf
xen: share start flags between PV and PVH
Use a global variable to store the start flags for both PV and PVH.
This allows the xen_initial_domain macro to work properly on PVH.
Note that ARM is also switched to use the new variable.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
This is the sync up with the canonical definitions of the input,
sound and display protocols in Xen.
Changes to kbdif:
1. Add missing string constants for {feature|request}-raw-pointer
to align with the rest of the interface file.
2. Add new XenStore feature fields, so it is possible to individually
control set of exposed virtual devices for each guest OS:
- set feature-disable-keyboard to 1 if no keyboard device needs
to be created
- set feature-disable-pointer to 1 if no pointer device needs
to be created
3. Move multi-touch device parameters to backend nodes: these are
described as a part of frontend's XenBus configuration nodes
while they belong to backend's configuration. Fix this by moving
the parameters to the proper section.
Unique-id field:
1. Add unique-id XenBus entry for virtual input and display.
2. Change type of unique-id field to string for sndif to align with
display and input protocols.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
My recent Xen patch series introduces a new HYPERVISOR_memory_op to
support direct priv-mapping of certain guest resources (such as ioreq
pages, used by emulators) by a tools domain, rather than having to access
such resources via the guest P2M.
This patch adds the necessary infrastructure to the privcmd driver and
Xen MMU code to support direct resource mapping.
NOTE: The adjustment in the MMU code is partially cosmetic. Xen will now
allow a PV tools domain to map guest pages either by GFN or MFN, thus
the term 'mfn' has been swapped for 'pfn' in the lower layers of the
remap code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
This is the sync up with the canonical definition of the sound
protocol in Xen:
1. Protocol version was referenced in the protocol description,
but missed its definition. Fixed by adding a constant
for current protocol version.
2. Some of the request descriptions have "reserved" fields
missed: fixed by adding corresponding entries.
3. Extend the size of the requests and responses to 64 octets.
Bump protocol version to 2.
4. Add explicit back and front synchronization
In order to provide explicit synchronization between backend and
frontend the following changes are introduced in the protocol:
- add new ring buffer for sending asynchronous events from
backend to frontend to report number of bytes played by the
frontend (XENSND_EVT_CUR_POS)
- introduce trigger events for playback control: start/stop/pause/resume
- add "req-" prefix to event-channel and ring-ref to unify naming
of the Xen event channels for requests and events
5. Add explicit back and front parameter negotiation
In order to provide explicit stream parameter negotiation between
backend and frontend the following changes are introduced in the protocol:
add XENSND_OP_HW_PARAM_QUERY request to read/update
configuration space for the parameters given: request passes
desired parameter's intervals/masks and the response to this request
returns allowed min/max intervals/masks to be used.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Pre-4.17 kernels ignored start_info's rsdp_paddr pointer and instead
relied on finding RSDP in standard location in BIOS RO memory. This
has worked since that's where Xen used to place it.
However, with recent Xen change (commit 4a5733771e6f ("libxl: put RSDP
for PVH guest near 4GB")) it prefers to keep RSDP at a "non-standard"
address. Even though as of commit b17d9d1df3 ("x86/xen: Add pvh
specific rsdp address retrieval function") Linux is able to find RSDP,
for back-compatibility reasons we need to indicate to Xen that we can
handle this, an we do so by setting XENFEAT_linux_rsdp_unrestricted
flag in ELF notes.
(Also take this opportunity and sync features.h header file with Xen)
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJaPKq7AAoJELDendYovxMvQOEH/2iuLSDI7b5vjPuBCvFjituP
floACKQl3Zp1Xk//DQLwTis02/9cIAOUGM11PmrkEq1lehpXPxIPzyfpx3wbEezd
A9hP71AMojdOIUCxucAGg94kxryv9OgXT6/qggzLlpmEpo7x12dVSPV+LxfcbkqL
zeTi1WEzz9jacfFI5CRvJx68tacIxvxCdKfauq2Yz2AB3BKd2xtMR7j77lycAeSw
KTFaIikKnZ3Aonn/yRUhD89oOp/Kt7XJib3glsAAKgA1GMuqmJsk1yB4Wm3qkpGD
bFSzf51HLl2PRyV5PxlJOfHtyTUKRj1Jf80YQgI2x9jR2LT3pBSI+NZt7Paw4Wc=
=QB74
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains two fixes for running under Xen:
- a fix avoiding resource conflicts between adding mmio areas and
memory hotplug
- a fix setting NX bits in page table entries copied from Xen when
running a PV guest"
* tag 'for-linus-4.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: Mark unallocated host memory as UNUSABLE
x86-64/Xen: eliminate W+X mappings
Commit f5775e0b61 ("x86/xen: discard RAM regions above the maximum
reservation") left host memory not assigned to dom0 as available for
memory hotplug.
Unfortunately this also meant that those regions could be used by
others. Specifically, commit fa564ad963 ("x86/PCI: Enable a 64bit BAR
on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") may try to map those
addresses as MMIO.
To prevent this mark unallocated host memory as E820_TYPE_UNUSABLE (thus
effectively reverting f5775e0b61) and keep track of that region as
a hostmem resource that can be used for the hotplug.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJaDdh4AAoJELDendYovxMvPFAH/2QjTys2ydIAdmwke4odpJ7U
xuy7HOQCzOeZ5YsZthzCBsN90VmnDM7X7CcB8weSdjcKlXMSAWD+J1RgkL2iAJhI
8tzIEXECrlNuz4V5mX9TmMgtPCr4qzU3fsts0pZy4fYDq1PVWDefqOwEtbpbWabb
wRSMq/nTb9iASTMgheSC0WfhJneqtJ+J20zrzkGPCBPRFcwfppeP8/7vpkmJslBi
eH/pfchICM4w093T/BfavnsPvhLdjgRuwVzn6+e46s4tLnZAxnLRVQ7SXZXzBORq
/dL/qC0XH3YXdU+XfIs//giZsmLns6SxZaMr4vs6TxFtuzZBKpLtkOKo9zndvxk=
=sZY5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Xen features and fixes for v4.15-rc1
Apart from several small fixes it contains the following features:
- a series by Joao Martins to add vdso support of the pv clock
interface
- a series by Juergen Gross to add support for Xen pv guests to be
able to run on 5 level paging hosts
- a series by Stefano Stabellini adding the Xen pvcalls frontend
driver using a paravirtualized socket interface"
* tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (34 commits)
xen/pvcalls: fix potential endless loop in pvcalls-front.c
xen/pvcalls: Add MODULE_LICENSE()
MAINTAINERS: xen, kvm: track pvclock-abi.h changes
x86/xen/time: setup vcpu 0 time info page
x86/xen/time: set pvclock flags on xen_time_init()
x86/pvclock: add setter for pvclock_pvti_cpu0_va
ptp_kvm: probe for kvm guest availability
xen/privcmd: remove unused variable pageidx
xen: select grant interface version
xen: update arch/x86/include/asm/xen/cpuid.h
xen: add grant interface version dependent constants to gnttab_ops
xen: limit grant v2 interface to the v1 functionality
xen: re-introduce support for grant v2 interface
xen: support priv-mapping in an HVM tools domain
xen/pvcalls: remove redundant check for irq >= 0
xen/pvcalls: fix unsigned less than zero error check
xen/time: Return -ENODEV from xen_get_wallclock()
xen/pvcalls-front: mark expected switch fall-through
xen: xenbus_probe_frontend: mark expected switch fall-throughs
xen/time: do not decrease steal time after live migration on xen
...
In order to support pvclock vdso on xen we need to setup the time
info page for vcpu 0 and register the page with Xen using the
VCPUOP_register_vcpu_time_memory_area hypercall. This hypercall
will also forcefully update the pvti which will set some of the
necessary flags for vdso. Afterwards we check if it supports the
PVCLOCK_TSC_STABLE_BIT flag which is mandatory for having
vdso/vsyscall support. And if so, it will set the cpu 0 pvti that
will be later on used when mapping the vdso image.
The xen headers are also updated to include the new hypercall for
registering the secondary vcpu_time_info struct.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
As there is currently no user for sub-page grants or transient grants
remove that functionality. This at once makes it possible to switch
from grant v2 to grant v1 without restrictions, as there is no loss of
functionality other than the limited frame number width related to
the switch.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The grant v2 support was removed from the kernel with
commit 438b33c714 ("xen/grant-table:
remove support for V2 tables") as the higher memory footprint of v2
grants resulted in less grants being possible for a kernel compared
to the v1 grant interface.
As machines with more than 16TB of memory are expected to be more
common in the near future support of grant v2 is mandatory in order
to be able to run a Xen pv domain at any memory location.
So re-add grant v2 support basically by reverting above commit.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Andrey Zhizhikin