Enhance usability by allowing the same plurality used in the output
title, for the command line parameter.
BEFORE, perf deceitfully acts as if there are no metrics to be had:
$ perf list metrics
List of pre-defined events (to be used in -e):
Metric Groups:
$
But singular 'metric' shows a list of metrics:
$ perf list metric
List of pre-defined events (to be used in -e):
Metrics:
IPC
[Instructions Per Cycle (per logical thread)]
UPI
[Uops Per Instruction]
AFTER, when asking for 'metrics', we actually see the metrics get listed:
$ perf list metrics
List of pre-defined events (to be used in -e):
Metrics:
IPC
[Instructions Per Cycle (per logical thread)]
UPI
[Uops Per Instruction]
Fixes: 71b0acce78 ("perf list: Add metric groups to perf list")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Janakarajan Natarajan <janakarajan.natarajan@amd.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Luke Mujica <lukemujica@google.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190919204306.12598-4-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the last unneeded use of cache.h in a header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
This is an old file, used by now incorrectly in many places, so it was
providing includes needed indirectly, fixup this fallout.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3x3l8gihoaeh7714os861ia7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All we need there is a forward declaration for 'union perf_event', so
remove it from there and add missing header directives in places using
things from this indirect include.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the movement of lots of stuff out of perf.h to other headers we
ended up not needing it in lots of places, remove it from those places.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c718m0sxxwp73lp9d8vpihb4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support in 'perf list' to output tool internal events, currently
only 'duration_time'.
Committer testing:
$ perf list dur*
List of pre-defined events (to be used in -e):
duration_time [Tool event]
Metric Groups:
$ perf list sw
List of pre-defined events (to be used in -e):
alignment-faults [Software event]
bpf-output [Software event]
context-switches OR cs [Software event]
cpu-clock [Software event]
cpu-migrations OR migrations [Software event]
dummy [Software event]
emulation-faults [Software event]
major-faults [Software event]
minor-faults [Software event]
page-faults OR faults [Software event]
task-clock [Software event]
duration_time [Tool event]
$ perf list | grep duration
duration_time [Tool event]
[L1D miss outstandings duration in cycles]
page walk duration are excluded in Skylake]
load. EPT page walk duration are excluded in Skylake]
page walk duration are excluded in Skylake]
store. EPT page walk duration are excluded in Skylake]
(instruction fetch) request. EPT page walk duration are excluded in
instruction fetch request. EPT page walk duration are excluded in
$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190326221823.11518-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a filter is specified on the command line, filter the metrics too.
Before:
% perf list foo
List of pre-defined events (to be used in -e):
Metric Groups:
DSB:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
... more metrics ...
After:
% perf list foo
List of pre-defined events (to be used in -e):
Metric Groups:
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20190314225002.30108-1-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-1y8oi2s8c4jhjtykgs5zvda1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add code to perf list to print metric groups, and metrics
that don't have an event name. The metricgroup code collects
the eventgroups and events into a rblist, and then prints
them according to the configured filters.
The metricgroups are printed by default, but can be
limited by perf list metric or perf list metricgroup
% perf list metricgroup
..
Metric Groups:
DSB:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
FLOPS:
GFLOPs
[Giga Floating Point Operations Per Second]
Frontend:
IFetch_Line_Utilization
[Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions]
Frontend_Bandwidth:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
Memory_BW:
MLP
[Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)]
v2: Check return value of asprintf to fix warning on FC26
Fix key in lookup/addition for the groups list
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-8-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:
static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
{
prefix = NULL;
if (p->option & RUN_SETUP)
prefix = NULL; /* setup_perf_directory(); */
Ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the printing of perf expressions and internal events to a new
clearer --details flag, instead of lumping it together with other debug
options in --debug. This makes it clearer to use.
Before
perf list --debug
...
unc_m_power_critical_throttle_cycles
[Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.
after
perf list --details
...
unc_m_power_critical_throttle_cycles
[Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170320201711.14142-14-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For debugging and testing it is useful to see the converted alias
string. Add support to perf stat/record and perf list to print the alias
conversion. The text string is saved in the alias structure. For perf
stat/record it is folded into the normal -v. For perf list -v was taken,
so we use --debug.
Before:
% perf list
...
cache:
l1d.replacement
[L1D data line replacements]
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
After
% perf list --debug
...
cache:
l1d.replacement
[L1D data line replacements]
cpu/umask=0x1,period=2000003,event=0x51/
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
cpu/umask=0x2,period=2000003,cmask=1,event=0x48/
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously we were dropping the useful longer descriptions that some
events have in the event list completely. This patch makes them appear with
perf list.
Old perf list:
baclears:
baclears.all
[Counts the number of baclears]
vs new:
perf list -v:
...
baclears:
baclears.all
[The BACLEARS event counts the number of times the front end is
resteered, mainly when the Branch Prediction Unit cannot provide
a correct prediction and this is corrected by the Branch Address
Calculator at the front end. The BACLEARS.ANY event counts the
number of baclears for any type of branch]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-13-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a --no-desc flag to 'perf list' to not print the event descriptions
that were earlier added for JSON events. This may be useful to get a
less crowded listing.
It's still default to print descriptions as that is the more useful
default for most users.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473978296-20712-9-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show SDT and pre-cached events by perf-list with "sdt". This also shows
the binary and build-id where the events are placed only when there are
same name events on different binaries.
e.g.:
# perf list sdt
List of pre-defined events (to be used in -e):
sdt_libc:lll_futex_wake [SDT event]
sdt_libc:lll_lock_wait_private [SDT event]
sdt_libc:longjmp [SDT event]
sdt_libc:longjmp_target [SDT event]
...
sdt_libstdcxx:rethrow@/usr/bin/gcc(0cc207fc4b27) [SDT event]
sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
sdt_libstdcxx:throw@/usr/bin/gcc(0cc207fc4b27) [SDT event]
sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
The binary path and build-id are shown in below format;
<GROUP>:<EVENT>@<PATH>(<BUILD-ID>)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160624090646.25421.44225.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the subcommand-related files from perf to a new library named
libsubcmd.a.
Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that one can, for instance, use it with wc -l:
# perf list *:*write* | wc -l
60
Or to look for the "bio" tracepoints, without 'perf list' headers:
# perf list *:*bio* | head
block:block_bio_backmerge [Tracepoint event]
block:block_bio_bounce [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_bio_frontmerge [Tracepoint event]
block:block_bio_queue [Tracepoint event]
block:block_bio_remap [Tracepoint event]
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ts7sc0x8u4io4cifzkup4j44@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend 'perf list --raw-dump' to 'perf list --raw-dump [hw|sw|cache
|tracepoint|pmu|event_glob]' in order to show the raw-dump of a certain
kind of events rather than all of the events.
Example:
Before this patch:
$ perf list --raw-dump hw
branch-instructions branch-misses bus-cycles cache-misses
cache-references cpu-cycles instructions stalled-cycles-backend
stalled-cycles-frontend
alignment-faults context-switches cpu-clock cpu-migrations
emulation-faults major-faults minor-faults page-faults task-clock
...
...
writeback:writeback_thread_start writeback:writeback_thread_stop
writeback:writeback_wait_iff_congested
writeback:writeback_wake_background writeback:writeback_wake_thread
As shown above, all of the events are printed.
After this patch:
$ perf list --raw-dump hw
branch-instructions branch-misses bus-cycles cache-misses
cache-references cpu-cycles instructions stalled-cycles-backend
stalled-cycles-frontend
As shown above, only the hw events are printed.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not need print_events_type or __print_events_type for listing hw/sw
events, let print_symbol_events do its job instead. Moreover,
print_symbol_events can also handle event_glob and name_only.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If somebody happens to name an event with the beginning of 'tracepoint'
(e.g. tracepoint_foo), then it will never be showed with perf list
event_glob, thus we parse the argument 'tracepoint' more carefully for
accuracy.
Example:
Before this patch:
$ perf list tracepoint_foo:*
jbd2:jbd2_start_commit [Tracepoint event]
jbd2:jbd2_commit_locking [Tracepoint event]
jbd2:jbd2_run_stats [Tracepoint event]
block:block_rq_issue [Tracepoint event]
block:block_bio_complete [Tracepoint event]
block:block_bio_backmerge [Tracepoint event]
block:block_getrq [Tracepoint event]
... ...
As shown above, all of the tracepoint events are printed. In fact, the
command's real intention is to print the events of tracepoint_foo.
After this patch:
$ perf list tracepoint_foo:*
tracepoint_foo:tp_foo_enter [Tracepoint event]
tracepoint_foo:tp_foo_exit [Tracepoint event]
As shown above, only the events of tracepoint_foo are printed.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hearer text 'List of pre-defined events (to be used in -e):' is
placed in an improper function, which causes an abnormal output, e.g.
'perf list hw' shows no guiding text at all, and 'perf list hw
L1-dcache*' shows the guiding text incorrectly in the middle of the
output.
Example
Before this patch:
$ perf list hw L1-dcache*
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
List of pre-defined events (to be used in -e): <-- incorrect position
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-prefetch-misses [Hardware cache event]
L1-dcache-prefetches [Hardware cache event]
L1-dcache-store-misses [Hardware cache event]
L1-dcache-stores [Hardware cache event]
After this patch:
$ perf list hw L1-dcache*
List of pre-defined events (to be used in -e): <-- correct position
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-prefetch-misses [Hardware cache event]
L1-dcache-prefetches [Hardware cache event]
L1-dcache-store-misses [Hardware cache event]
L1-dcache-stores [Hardware cache event]
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1423833115-11199-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf list' is not very helpful if you forget the syntax:
$ perf list -h
List of pre-defined events (to be used in -e):
After:
$ perf list -h
usage: perf list [hw|sw|cache|tracepoint|pmu|event_glob]
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/527133AD.4030003@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With a return after the if check an indentation level can be removed.
Indentation shift only; no functional changes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383149707-1008-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored
__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.
The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05 in builtin-sched.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic bash completion for the -e option in record, top and stat
subcommands. Only hardware, software and tracepoint events are
supported.
Breakpoints, raw events and events grouping completion need more
thinking.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344522713-27951-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When /sys/kernel/debug is mounted the list can be imense, so
use the pager like the other tools.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090812174459.GB3495@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Enable -Wextra. This found a few real bugs plus a number
of signed/unsigned type mismatches/uncleanlinesses. It
also required a few annotations
All things considered it was still worth it so lets try with
this enabled for now.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Kim Phillips