Store SYMBOL_ANNOTATE_ERRNO__BPF_MISSING_BTF in variable *ret*, instead
of returning in the middle of the function and leaking multiple
resources: prog_linfo, btf, s and bfdf.
Addresses-Coverity-ID: 1454832 ("Structurally dead code")
Fixes: 11aad897f6 ("perf annotate: Don't return -1 for error when doing BPF disassembly")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191014171047.GA30850@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Return errno when open_memstream() fails and add two new speciall error
codes for when an invalid, non BPF file or one without BTF is passed to
symbol__disassemble_bpf(), so that its callers can rely on
symbol__strerror_disassemble() to convert that to a human readable error
message that can help figure out what is wrong, with hints even.
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-usevw9r2gcipfcrbpaueurw0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should return errno or the annotation extra range understood by
symbol__strerror_disassemble() instead of -1, fix it, returning ENOMEM
instead.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-8of1cmj3rz0mppfcshc9bbqq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are called from symbol__annotate() and to propagate errors that can
help understand the problem make them return what
symbol__strerror_disassemble() known, i.e. errno codes and other
annotation specific errors in a special, out of errnos, range.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-pqx7srcv7tixgid251aeboj6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just returning -1 in symbol__annotate() when symbol__annotate()
failed, propagate its error as it is used later to pass to
symbol__strerror_disassemble() to present a error message to the user,
that in some cases were getting:
"Invalid -1 error code"
Fix it to propagate the error.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-0tj89rs9g7nbcyd5skadlvuu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Callers of symbol__annotate() expect a errno value or some other
extended error value range in symbol__strerror_disassemble() to
convert to a proper error string, fix it when propagating a failure to
find the arch specific annotation routines via arch__find(arch_name).
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-o0k6dw7cas0vvmjjvgsyvu1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callers of symbol__annotate2() use symbol__strerror_disassemble() to
convert its failure returns into a human readable string, so
propagate error values from functions it calls, starting with
perf_env__arch() that when fails the right thing to do is to look at
'errno' to see why its possible call to uname() failed.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-it5d83kyusfhb1q1b0l4pxzs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_sample struct definition and the event_attr_init() are in
util/event.h, but some places were getting it thru an otherwise needless
util/mmap.h header, fix it by including util/event.h directly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p1anwyjdbbvghrkl9dlxv7h5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this isn't used at all in mmap.h but in evlist.h, so to cut down the
header dependency tree, move it to where it is used.
Also add mmap.h to the places using it but previously getting it
indirectly via evlist.h.
Add missing pthread.h to evlist.h, as it has a pthread_t struct member
and was getting the header via mmap.h.
Noticed while processing a Jiri's libperf batch touching mmap.h, where
almost everything gets rebuilt because evlist.h is so popular, so cut
down't this rebuild the world party.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lkml.kernel.org/n/tip-he0uljeftl0xfveh3d6vtode@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check that it is not needed and remove, fixing up some fallout for
places where it was only serving to get something else.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9h6dg6lsqe2usyqjh5rrues4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't carry the session.h include directive in auxtrace.h,
which in turn opens a can of worms of files that were getting all sorts
of things via that include, fix them all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-d2d83aovpgri2z75wlitquni@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the last unneeded use of cache.h in a header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
This is an old file, used by now incorrectly in many places, so it was
providing includes needed indirectly, fixup this fallout.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3x3l8gihoaeh7714os861ia7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reducing the size of symbol.h by removing things that are better placed
somewhere else.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-edenkmjt1oe5fks2s6umd30b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When srcline was introduced it wrongly added the include to util/sort.h,
even with that header not needing the definitions it provides, fix it by
adding it to the places that need it as a pre patch to remove srcline.h
from sort.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-shuebppedtye8hrgxk15qe3x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get closer to upstream and check if we need to sync more UAPI
headers, pick up fixes for libbpf that prevent perf's container tests
from completing successfuly, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code to disassemble BPF programs uses binutil's disassembling
routines, and those use in turn fprintf to print to a memstream FILE,
adding a newline at the end of each line, which ends up confusing the
TUI routines called from:
annotate_browser__write()
annotate_line__write()
annotate_browser__printf()
ui_browser__vprintf()
SLsmg_vprintf()
The SLsmg_vprintf() function in the slang library gets confused with the
terminating newline, so make the disasm_line__parse() function that
parses the lines produced by the BPF specific disassembler (that uses
binutil's libopcodes) and the lines produced by the objdump based
disassembler used for everything else (and that doesn't adds this
terminating newline) trim the end of the line in addition of the
beginning.
This way when disasm_line->ops.raw, i.e. for instructions without a
special scnprintf() method, we'll not have that \n getting in the way of
filling the screen right after the instruction with spaces to avoid
leaving what was on the screen before and thus garbling the annotation
screen, breaking scrolling, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Fixes: 6987561c9e ("perf annotate: Enable annotation of BPF programs")
Link: https://lkml.kernel.org/n/tip-unbr5a5efakobfr6rhxq99ta@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the nr_members member from perf's evsel to libperf's perf_evsel.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-60-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move nr_entries count from 'struct perf' to into perf_evlist struct.
Committer notes:
Fix tools/perf/arch/s390/util/auxtrace.c case. And also the comment in
tools/perf/util/annotate.h.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-42-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow for destructors to check if they're operating on a object still
in a list, and to avoid going from use after free list entries into
still valid, or even also other already removed from list entries.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-deh17ub44atyox3j90e6rksu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In places where the equivalent was already being done, i.e.:
free(a);
a = NULL;
And in placs where struct members are being freed so that if we have
some erroneous reference to its struct, then accesses to freed members
will result in segfaults, which we can detect faster than use after free
to areas that may still have something seemingly valid.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-jatyoofo5boc1bsvoig6bb6i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on the following report from Smatch, fix the potential
dereferencing freed memory check.
tools/perf/util/annotate.c:1125
disasm_line__parse() error: dereferencing freed memory 'namep'
tools/perf/util/annotate.c
1100 static int disasm_line__parse(char *line, const char **namep, char **rawp)
1101 {
1102 char tmp, *name = ltrim(line);
[...]
1114 *namep = strdup(name);
1115
1116 if (*namep == NULL)
1117 goto out_free_name;
[...]
1124 out_free_name:
1125 free((void *)namep);
^^^^^
1126 *namep = NULL;
^^^^^^
1127 return -1;
1128 }
If strdup() fails to allocate memory space for *namep, we don't need to
free memory with pointer 'namep', which is resident in data structure
disasm_line::ins::name; and *namep is NULL pointer for this failure, so
it's pointless to assign NULL to *namep again.
Committer note:
Freeing namep, which is the address of the first entry of the 'struct
ins' that is the first member of struct disasm_line would in fact free
that disasm_line instance, if it was allocated via malloc/calloc, which,
later, would a dereference of freed memory.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190702103420.27540-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cleaning up a bit more tools/perf/util/ by using things we got from the
kernel and have in tools/lib/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7hluuoveryoicvkclshzjf1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No change in behaviour, just using the same kernel idiom for such
operation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-a85lkptkt0ru40irpga8yf54@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXP/1xQAKCRCyPKLppCJ+
J9xcAQCwOITAshE7op7HbKUPtkqiMNu+hpNa3skhxEpGHvKO0AEArpBXtuvEP8EU
PZsp+8vcVrlZ+dZutttgvkRz25mScg8=
=kfFb
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.3-20190611' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf record:
Alexey Budankov:
- Allow mixing --user-regs with --call-graph=dwarf, making sure that
the minimal set of registers for DWARF unwinding is present in the
set of user registers requested to be present in each sample, while
warning the user that this may make callchains unreliable if more
that the minimal set of registers is needed to unwind.
yuzhoujian:
- Add support to collect callchains from kernel or user space only,
IOW allow setting the perf_event_attr.exclude_callchain_{kernel,user}
bits from the command line.
perf trace:
Arnaldo Carvalho de Melo:
- Remove x86_64 specific syscall numbers from the augmented_raw_syscalls
BPF in-kernel collector of augmented raw_syscalls:sys_{enter,exit}
payloads, use instead the syscall numbers obtainer either by the
arch specific syscalltbl generators or from audit-libs.
- Allow 'perf trace' to ask for the number of bytes to collect for
string arguments, for now ask for PATH_MAX, i.e. the whole
pathnames, which ends up being just a way to speficy which syscall
args are pathnames and thus should be read using bpf_probe_read_str().
- Skip unknown syscalls when expanding strace like syscall groups.
This helps using the 'string' group of syscalls to work in arm64,
where some of the syscalls present in x86_64 that deal with
strings, for instance 'access', are deprecated and this should not
be asked for tracing.
Leo Yan:
- Exit when failing to build eBPF program.
perf config:
Arnaldo Carvalho de Melo:
- Bail out when a handler returns failure for a key-value pair. This
helps with cases where processing a key-value pair is not just a
matter of setting some tool specific knob, involving, for instance
building a BPF program to then attach to the list of events 'perf
trace' will use, e.g. augmented_raw_syscalls.c.
perf.data:
Kan Liang:
- Read and store die ID information available in new Intel processors
in CPUID.1F in the CPU topology written in the perf.data header.
perf stat:
Kan Liang:
- Support per-die aggregation.
Documentation:
Arnaldo Carvalho de Melo:
- Update perf.data documentation about the CPU_TOPOLOGY, MEM_TOPOLOGY,
CLOCKID and DIR_FORMAT headers.
Song Liu:
- Add description of headers HEADER_BPF_PROG_INFO and HEADER_BPF_BTF.
Leo Yan:
- Update default value for llvm.clang-bpf-cmd-template in 'man perf-config'.
JVMTI:
Jiri Olsa:
- Address gcc string overflow warning for strncpy()
core:
- Remove superfluous nthreads system_wide setup in perf_evsel__alloc_fd().
Intel PT:
Adrian Hunter:
- Add support for samples to contain IPC ratio, collecting cycles
information from CYC packets, showing the IPC info periodically, because
Intel PT does not update the cycle count on every branch or instruction,
the incremental values will often be zero. When there are values, they
will be the number of instructions and number of cycles since the last
update, and thus represent the average IPC since the last IPC value.
E.g.:
# perf record --cpu 1 -m200000 -a -e intel_pt/cyc/u sleep 0.0001
rounding mmap pages size to 1024M (262144 pages)
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 2.208 MB perf.data ]
# perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
#
<SNIP + add line numbering to make sense of IPC counts e.g.: (18/3)>
1 cc1 63501.650479626: 7f5219ac27bf _int_free+0x3f jnz 0x7f5219ac2af0 IPC: 0.81 (36/44)
2 cc1 63501.650479626: 7f5219ac27c5 _int_free+0x45 cmp $0x1f, %rbp
3 cc1 63501.650479626: 7f5219ac27c9 _int_free+0x49 jbe 0x7f5219ac2b00
4 cc1 63501.650479626: 7f5219ac27cf _int_free+0x4f test $0x8, %al
5 cc1 63501.650479626: 7f5219ac27d1 _int_free+0x51 jnz 0x7f5219ac2b00
6 cc1 63501.650479626: 7f5219ac27d7 _int_free+0x57 movq 0x13c58a(%rip), %rcx
7 cc1 63501.650479626: 7f5219ac27de _int_free+0x5e mov %rdi, %r12
8 cc1 63501.650479626: 7f5219ac27e1 _int_free+0x61 movq %fs:(%rcx), %rax
9 cc1 63501.650479626: 7f5219ac27e5 _int_free+0x65 test %rax, %rax
10 cc1 63501.650479626: 7f5219ac27e8 _int_free+0x68 jz 0x7f5219ac2821
11 cc1 63501.650479626: 7f5219ac27ea _int_free+0x6a leaq -0x11(%rbp), %rdi
12 cc1 63501.650479626: 7f5219ac27ee _int_free+0x6e mov %rdi, %rsi
13 cc1 63501.650479626: 7f5219ac27f1 _int_free+0x71 shr $0x4, %rsi
14 cc1 63501.650479626: 7f5219ac27f5 _int_free+0x75 cmpq %rsi, 0x13caf4(%rip)
15 cc1 63501.650479626: 7f5219ac27fc _int_free+0x7c jbe 0x7f5219ac2821
16 cc1 63501.650479626: 7f5219ac2821 _int_free+0xa1 cmpq 0x13f138(%rip), %rbp
17 cc1 63501.650479626: 7f5219ac2828 _int_free+0xa8 jnbe 0x7f5219ac28d8
18 cc1 63501.650479626: 7f5219ac28d8 _int_free+0x158 testb $0x2, 0x8(%rbx)
19 cc1 63501.650479628: 7f5219ac28dc _int_free+0x15c jnz 0x7f5219ac2ab0 IPC: 6.00 (18/3)
<SNIP>
- Allow using time ranges with Intel PT, i.e. these features, already
present but not optimially usable with Intel PT, should be now:
Select the second 10% time slice:
$ perf script --time 10%/2
Select from 0% to 10% time slice:
$ perf script --time 0%-10%
Select the first and second 10% time slices:
$ perf script --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices:
$ perf script --time 0%-10%,30%-40%
cs-etm (ARM):
Mathieu Poirier:
- Add support for CPU-wide trace scenarios.
s390:
Thomas Richter:
- Fix missing kvm module load for s390.
- Fix OOM error in TUI mode on s390
- Support s390 diag event display when doing analysis on !s390
architectures.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Debugging a OOM error using the TUI interface revealed this issue
on s390:
[tmricht@m83lp54 perf]$ cat /proc/kallsyms |sort
....
00000001119b7158 B radix_tree_node_cachep
00000001119b8000 B __bss_stop
00000001119b8000 B _end
000003ff80002850 t autofs_mount [autofs4]
000003ff80002868 t autofs_show_options [autofs4]
000003ff80002a98 t autofs_evict_inode [autofs4]
....
There is a huge gap between the last kernel symbol
__bss_stop/_end and the first kernel module symbol
autofs_mount (from autofs4 module).
After reading the kernel symbol table via functions:
dso__load()
+--> dso__load_kernel_sym()
+--> dso__load_kallsyms()
+--> __dso_load_kallsyms()
+--> symbols__fixup_end()
the symbol __bss_stop has a start address of 1119b8000 and
an end address of 3ff80002850, as can be seen by this debug statement:
symbols__fixup_end __bss_stop start:0x1119b8000 end:0x3ff80002850
The size of symbol __bss_stop is 0x3fe6e64a850 bytes!
It is the last kernel symbol and fills up the space until
the first kernel module symbol.
This size kills the TUI interface when executing the following
code:
process_sample_event()
hist_entry_iter__add()
hist_iter__report_callback()
hist_entry__inc_addr_samples()
symbol__inc_addr_samples(symbol = __bss_stop)
symbol__cycles_hist()
annotated_source__alloc_histograms(...,
symbol__size(sym),
...)
This function allocates memory to save sample histograms.
The symbol_size() marco is defined as sym->end - sym->start, which
results in above value of 0x3fe6e64a850 bytes and
the call to calloc() in annotated_source__alloc_histograms() fails.
The histgram memory allocation might fail, make this failure
no-fatal and continue processing.
Output before:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
-i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
__symbol__inc_addr_samples(875): ENOMEM! sym->name=__bss_stop,
start=0x1119b8000, addr=0x2aa0005eb08, end=0x3ff80002850,
func: 0
problem adding hist entry, skipping event
0x938b8 [0x8]: failed to process type: 68 [Cannot allocate memory]
[tmricht@m83lp54 perf]$
Output after:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
-i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
symbol__inc_addr_samples map:0x1597830 start:0x110730000 end:0x3ff80002850
symbol__hists notes->src:0x2aa2a70 nr_hists:1
symbol__inc_addr_samples sym:unlink_anon_vmas src:0x2aa2a70
__symbol__inc_addr_samples: addr=0x11094c69e
0x11094c670 unlink_anon_vmas: period++ [addr: 0x11094c69e, 0x2e, evidx=0]
=> nr_samples: 1, period: 526008
[tmricht@m83lp54 perf]$
There is no error about failed memory allocation and the TUI interface
shows all entries.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/90cb5607-3e12-5167-682d-978eba7dafa8@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on 1 normalized pattern(s):
released under the gpl v2 and only v2 not any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 12 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141332.526460839@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hist__account_cycles() function is executed when the
hist_iter__branch_callback() is called.
But it looks it's not necessary. In hist__account_cycles, it already
walks on all branch entries.
This patch moves the hist__account_cycles out of callback, now the data
processing is much faster than before.
Previous code has an issue that the ch[offset].num++ (in
__symbol__account_cycles) is executed repeatedly since
hist__account_cycles is called in each hist_iter__branch_callback, so
the counting of ch[offset].num is not correct (too big).
With this patch, the issue is fixed. And we don't need the code of
"ch->reset >= ch->num / 2" to check if there are too many overlaps (in
annotation__count_and_fill), otherwise some data would be hidden.
Now, we can try, for example:
perf record -b ...
perf annotate or perf report -s symbol
The before/after output should be no change.
v3:
---
Fix the crash in stdio mode.
Like previous code, it needs the checking of ui__has_annotation()
before hist__account_cycles()
v2:
---
1. Cover the similar perf report
2. Remove the checking code "ch->reset >= ch->num / 2"
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1552684577-29041-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 6987561c9e ("perf annotate: Enable annotation of BPF programs") adds
support for BPF programs annotations but the new code does not build on 32-bit.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Fixes: 6987561c9e ("perf annotate: Enable annotation of BPF programs")
Link: http://lkml.kernel.org/r/20190403194452.10845-1-cascardo@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lots of places get the map.h file indirectly, and since we're going to
remove it from machine.h, then those need to include it directly, do it
now, before we remove that dep.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And fixup the fallout in places like annotation and jitdump that were
using things like dirname() but weren't including libgen.h, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wrii9hy1a1wathc0398f9fgt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symbol__disassemble() function uses shell to launch objdump and
filter its output via grep. Passing filenames by interpolating them into
the command line via "%s" may lead to problems if said filenames contain
special characters.
Instead, pass the filename as a command line argument where it is not
subject to any kind of interpretation, then use quoted shell
interpolation to build the strings we need safely.
Signed-off-by: Ivan Krylov <krylov.r00t@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181014111803.5d83b806@Tarkus
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce basic 'perf annotate' support for ARC to be able to use
anotation via stdio interface.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Brodkin <alexey.brodkin@synopsys.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/20181204175118.25232-1-Eugeniy.Paltsev@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Go over the tools/ files that are maintained in Arnaldo's tree and
fix common typos: half of them were in comments, the other half
in JSON files.
No change in functionality intended.
Committer notes:
This was split from a larger patch as there are code that is,
additionally, maintained outside the kernel tree, so to ease
cherry-picking and/or backporting, split this into multiple patches.
Just typos in comments, no need to backport, reducing the possibility of
possible backporting artifacts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181203102200.GA104797@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We often use the symbol__annotate2() to annotate a specified symbol.
While annotating may take some time, so in order to avoid annotating the
same symbol repeatedly, the patch creates a new flag to indicate the
symbol has been annotated.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1543586097-27632-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with binutils 2.28, aarch64 objdump adds comments to the
disassembly output to show the alternative names of a condition code
[1].
It is assumed that commas in objdump comments could occur in other
arches now or in the future, so this fix is arch-independent.
The fix could have been done with arm64 specific jump__parse and
jump__scnprintf functions, but the jump__scnprintf instruction would
have to have its comment character be a literal, since the scnprintf
functions cannot receive a struct arch easily.
This inconvenience also applies to the generic jump__scnprintf, which is
why we add a raw_comment pointer to struct ins_operands, so the __parse
function assigns it to be re-used by its corresponding __scnprintf
function.
Example differences in 'perf annotate --stdio2' output on an aarch64
perf.data file:
BEFORE: → b.cs ffff200008133d1c <unwind_frame+0x18c> // b.hs, dffff7ecc47b
AFTER : ↓ b.cs 18c
BEFORE: → b.cc ffff200008d8d9cc <get_alloc_profile+0x31c> // b.lo, b.ul, dffff727295b
AFTER : ↓ b.cc 31c
The branch target labels 18c and 31c also now appear in the output:
BEFORE: add x26, x29, #0x80
AFTER : 18c: add x26, x29, #0x80
BEFORE: add x21, x21, #0x8
AFTER : 31c: add x21, x21, #0x8
The Fixes: tag below is added so stable branches will get the update; it
doesn't necessarily mean that commit was broken at the time, rather it
didn't withstand the aarch64 objdump update.
Tested no difference in output for sample x86_64, power arch perf.data files.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=bb7eff5206e4795ac79c177a80fe9f4630aaf730
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: b13bbeee5e ("perf annotate: Fix branch instruction with multiple operands")
Link: http://lkml.kernel.org/r/20180827125340.a2f7e291901d17cea05daba4@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to call dso__needs_decompress() twice in the function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --percent-type option to set annotation percent type from following
choices:
global-period, local-period, global-hits, local-hits
Examples:
$ perf annotate --percent-type period-local --stdio | head -1
Percent | Source code ... es, percent: local period)
$ perf annotate --percent-type hits-local --stdio | head -1
Percent | Source code ... es, percent: local hits)
$ perf annotate --percent-type hits-global --stdio | head -1
Percent | Source code ... es, percent: global hits)
$ perf annotate --percent-type period-global --stdio | head -1
Percent | Source code ... es, percent: global period)
The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global).
The period/hits keywords set the base the percentage is computed on -
the samples period or the number of samples (hits).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In following patches we will allow to switch percent type even for stdio
annotation outputs. Adding the percent type value into the annotation
outputs title.
$ perf annotate --stdio
Percent | Sou ... instructions:u } (2805 samples, percent: local period)
--------------------------- ... ------------------------------------------------------
...
$ perf annotate --stdio2
Samples: 2K of events 'anon ... count (approx.): 156525487, [percent: local period]
safe_write.c() /usr/bin/yes
Percent
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we display the percentages in annotation output based on
number of samples hits. Switching it to period based percentage by
default, because it corresponds more to the time spent on the line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass 'struct annotation_options' to map_symbol__annotation_dump(), to
carry on and pass the percent_type value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass struct annotation_options to symbol__calc_lines(), to carry on and
pass the percent_type value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Gustavo A. R. Silva