IV/ICV should be trimmed immediately after decoding
(this is a decryptor job).
Trim IV/ICV inside decrypt() for SW decrypted frames,
for HW decrypted - before rtl88eu_mon_recv_hook().
Adopt frames receive process to work without IV/ICV fields.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sw_decrypt always is 0, so replace it with 0.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If this frame contains IV/ICV fields, ether_type field located a little farther.
This bug already fixed here:
https://github.com/lwfinger/rtl8188eu/blob/master/core/rtw_recv.c#L569 .
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DIV_ROUND_UP macro is shorter and look better than if-else construction.
DIV_ROUND_UP used in rtw_signal_stat_timer_hdl().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
recv_frame->rx_(data|len|tail) duplicate pkt (skb) data|len|tail members
and require special functions recvframe_(put|pull|pull_tail)()
instead of skb_(put|pull|trim).
Replace rx_(data|len|tail) with pkt->(data|len|tail),
remove rx_(data|len|tail) and remove recvframe_(put|pull|pull_tail)().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with
a destination argument that an earlier function call may have set to NULL:
staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr':
staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull]
staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr':
staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull]
I'm fixing this by adding a NULL pointer check and returning failure
from the function, which is hopefully already handled properly.
This seems to date back to when the drivers were originally added,
so backporting the fix to stable seems appropriate. There are other
related realtek drivers in the kernel, but none of them contain a
function with a similar name or produce this warning.
Cc: stable@vger.kernel.org
Fixes: 1cc18a22b9 ("staging: r8188eu: Add files for new driver - part 5")
Fixes: 2865d42c78 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fw_state member of struct mlme_priv never obtain WIFI_MP_STATE value,
so code only for (fw_state == WIFI_MP_STATE) is dead.
Remove it, WIFI_MP_*STATE and WIFI_MP_CTX* definitions.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit da25a8ec6b ("staging: rtl8188eu: remove unused
debugging functions") is_signal_dbg is never set to true, so the code
under if (adapter->recvpriv.is_signal_dbg) is dead. Remove the
variable and the dead code.
The signal_strength_dbg was referenced only in the code that is being
removed, so remove it as well.
Also fix coding style issues in the touched lines.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ivan Safonov <insafonov@gmail.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pallocated_frame_buf used only to preserve pointer for vfree function.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
precv_frame_buf is used as local variable only in one function.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Value of free_recvframe_cnt does not used.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no reason to use these wrappers.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This simple function does not allocate any resource.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PTR_ALIGN is a bit shorter than N_BYTE_ALIGMENT.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is only used inside rtw_recv.c. Which is quite logical,
since it's a timer callback: it is passed as the _fn argument to
setup_timer(). So it is internal to rtw_recv.c and should be static.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geliang Tang <geliangtang@163.com>
Cc: Jakub Sitnicki <jsitnicki@gmail.com>
Cc: Ivan Safonov <insafonov@gmail.com>
Cc: Kyle Kuffermann <kyle.kuffermann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the issue reported by checkpatch.pl:
"Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF
has changed addresses in the past, and may do so again. Linux
already includes a copy of the GPL."
in all files for the rtl8188eu driver.
Signed-off-by: Kyle Kuffermann <kyle.kuffermann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vfree frees the virtually continuous memory area starting at addr.
If addr is NULL, no operation is performed. So NULL test is not needed
before vfree.
This was done using Coccinelle:
@@
expression x;
@@
-if (x != NULL)
vfree(x);
@@
expression x;
@@
-if (x != NULL) {
vfree(x);
x = NULL;
-}
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Casting a pointer to a pointer of the same type is unnecessary, so remove
these unnecessary casts.
This was done with Coccinelle:
@@
type T;
T *ptr;
@@
- (T *)ptr
+ ptr
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes braces for single statement blocks. The warning
was detected using checkpatch.pl.
Coccinelle was used to make the change.
@@
expression e,e1;
@@
- if (e) {
+ if (e)
e1;
- }
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use list_first_entry_or_null() instead of list_empty() + container_of()
to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to reinvent a wheel, i.e. print_hex_dump(). Replace an open-coded
variant by generic kernel helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
x = x + a and x += a equivalen, but second preferably.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds support for monitoring IEEE 802.11 Data and Management frames
received or transmitted by a RTL8188EU-based device handled by this
driver.
The monitor interface is not enabled by default and will be registered
only if monitor_enable module parameter is set to 1. When enabled it
will show up as a monX network device, which can be used by the
userspace programs for monitoring network traffic.
It is intended as an exploratory/debugging tool for rtl8188eu driver.
Signed-off-by: Jakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Multiple blank lines is against the kernel coding style and checkpatch
complains for that.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_init_recvframe() was not being used.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An exit label which does nothing except return, is not worth having. So
remove it.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value of rtw_os_recv_resource_alloc() is never checked, so
make it as void. Moreover as of now the function can not fail.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function rtw_os_recv_resource_alloc() only uses the argument
struct recv_frame *. So remove the other unused argument.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are all defined as a part of the standard and should not be
duplicated on a per-driver basis. Use the global ones and delete the
local ones.
Note that a couple of them had slight wording differences, things like
INVALID vs. NOT_VALID or similar, so they are aligned with the global
naming conventions here, as dictated by compile testing.
This isn't the totality of duplicated data removed, but it is a start.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parentheses are not needed around the right hand side of an assignment.
This patch remove parenthese of such occurenses. Issue was detected and
solved using the following coccinelle script:
@rule1@
identifier x, y, z;
expression E1, E2;
@@
(
x = (y == z);
|
x = (E1 == E2);
|
x =
-(
...
-)
;
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the use of API function setup_timer
instead of driver specific function init_timer as it is
the preferred and standard way to set and setup the timer.
To be compatible with the changes, argument types of
referenced functions are changed. Also, definition of
function _init_timer is removed as it is no longer needed
after this change.
Here, these cases are handled using Coccinelle and
semantic patch used for this is as follows:
@@ expression x, y; identifier a, b;@@
- _init_timer (&x, y, a, b);
+ setup_timer (&x, a, (unsigned long)b);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the use of API function mod_timer
instead of driver specific function _set_timer as it is
a more efficient and standard way to update the expire
field of an active timer. Also, definition of function
_set_timer is removed as it is no longer needed after
this change.
Here, these cases are handled using Coccinelle and
semantic patch used for this is as follows:
@@ expression x; expression y;@@
- _set_timer (&x, y);
+ mod_timer (&x, jiffies + msecs_to_jiffies (y));
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a variable is declared and initialized and then never updated in the
function.This default value is then used as the return from the
function.
So removed that unneeded return variable and returning that default
initial value directly.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes space related ERROR reports by checkpatch.pl
Generated by $ git ls-files "drivers/staging/rtl8188eu/*.[ch]" | \
xargs ./scripts/checkpatch.pl -f --fix-inplace --strict --types=SPACING
Already checked by text comparasion
$git diff -w
and binary comparasion of r8188eu.ko
$objdiff diff <old_commit> <new_commit>
Signed-off-by: Jia He <hejianet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
void pointers do not need to be cast to other pointer types.
The semantic patch used to find this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
*((T *)e)
|
((T *)x)[...]
|
((T *)x)->f
|
- (T *)
e
)
Build tested it.
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_os_recv_resource_free() has empty defination, so we can remove it.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_os_recv_resource_init() has empty defination, so we can remove it.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
