The current implementation of btrfs_page_exists_in_range() gives the
wrong answer if the workingset code has stored a shadow entry in the
page cache. The filemap_range_has_page() function does not have this
problem, and it's shared code, so use it instead.
eigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the last step of scrub_handle_error_block, we try to combine good
copies on all possible mirrors, this works fine for raid1 and raid10,
but not for raid56 as it's doing parity rebuild.
If parity rebuild doesn't get back with correct data which matches its
checksum, in case of replace we'd rather write what is stored in the
source device than the data calculuated from parity.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
async_missing_raid56() is identical to async_read_rebuild().
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously, btrfs_inode_by_name() returned 0 which left caller to check
objectid of location even location if the type was invalid.
Let btrfs_inode_by_name() return -EUCLEAN if a corrupted location of a
dir entry is found. Removal of label out_err also simplifies the
function.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ drop unlikely ]
Signed-off-by: David Sterba <dsterba@suse.com>
This function btrfs_close_extra_devices() is about freeing
extra devids which once it may have belonged to this filesystem.
So rename it and add the comment. The _devid suffix is
appropriate as this function won't handle devices which are
outside of the filesytem being mounted.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This argument is always set to the root of the inode, which is also
passed. So let's get a reference inside the function and simplify
the arg list.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
According to tlv_put()'s prototype, data and attrlen needs to be
exchanged in the macro, but seems all callers are already aware of
this misorder and are therefore not affected.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that nothing uses the root arg of btrfs_log_dentry_safe it can be
safely removed. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_log_inode_parent is called from 2 places (btrfs_log_dentry_safe
and btrfs_log_new_name) both of which pass inode->root as the root
argument and the inode itself. Remove the redundant root argument and
get a reference to the root directly from the inode, also remove
redundant root != inode->root check from the same function. No
functional change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function always sets keep_locks to 1 and saves the old value of
keep_locks which is restored at the end. So there is no way it can be
called without keep_locks being set. Remove comment imposing redundant
requirement on callers.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The xattr_handler::get prototype returns int, use it. The only ssize_t
exception is the per-inode listxattr handler.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extern for functions does not make any difference, there are only a few
so let's remove them before it's too late.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When send finishes processing an inode representing a regular file, it
always issues a truncate operation for that file, even if its size did
not change or the last write sets the file size correctly. In the most
common cases, the issued write operations set the file to correct size
(either full or incremental sends) or the file size did not change (for
incremental sends), so the only case where a truncate operation is needed
is when a file size becomes smaller in the send snapshot when compared
to the parent snapshot.
By not issuing unnecessary truncate operations we reduce the stream size
and save time in the receiver. Currently truncating a file to the same
size triggers writeback of its last page (if it's dirty) and waits for it
to complete (only if the file size is not aligned with the filesystem's
sector size). This is being fixed by another patch and is independent of
this change (that patch's title is "Btrfs: skip writeback of last page
when truncating file to same size").
The following script was used to measure time spent by a receiver without
this change applied, with this change applied, and without this change and
with the truncate fix applied (the fix to not make it start and wait for
writeback to complete).
$ cat test_send.sh
#!/bin/bash
SRC_DEV=/dev/sdc
DST_DEV=/dev/sdd
SRC_MNT=/mnt/sdc
DST_MNT=/mnt/sdd
mkfs.btrfs -f $SRC_DEV >/dev/null
mkfs.btrfs -f $DST_DEV >/dev/null
mount $SRC_DEV $SRC_MNT
mount $DST_DEV $DST_MNT
echo "Creating source filesystem"
for ((t = 0; t < 10; t++)); do
(
for ((i = 1; i <= 20000; i++)); do
xfs_io -f -c "pwrite -S 0xab 0 5000" \
$SRC_MNT/file_$i > /dev/null
done
) &
worker_pids[$t]=$!
done
wait ${worker_pids[@]}
echo "Creating and sending snapshot"
btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
/usr/bin/time -f "send took %e seconds" \
btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
/usr/bin/time -f "receive took %e seconds" \
btrfs receive -f $SRC_MNT/send_file $DST_MNT
umount $SRC_MNT
umount $DST_MNT
The results, which are averages for 5 runs for each case, were the
following:
* Without this change
average receive time was 26.49 seconds
standard deviation of 2.53 seconds
* Without this change and with the truncate fix
average receive time was 12.51 seconds
standard deviation of 0.32 seconds
* With this change and without the truncate fix
average receive time was 10.02 seconds
standard deviation of 1.11 seconds
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we truncate a file to the same size and that size is not aligned
with the sector size, we end up triggering writeback (and wait for it to
complete) of the last page. This is unncessary as we can not have delayed
allocation beyond the inode's i_size and the goal of truncating a file
to its own size is to discard prealloc extents (allocated via the
fallocate(2) system call). Besides the unnecessary IO start and wait, it
also breaks the oppurtunity for larger contiguous extents on disk, as
before the last dirty page there might be other dirty pages.
This scenario is probably not very common in general, however it is
common for btrfs receive implementations because currently the send
stream always issues a truncate operation for each processed inode as
the last operation for that inode (this truncate operation is not
always needed and the send implementation will be addressed to avoid
them).
So improve this by not starting and waiting for writeback of the inode's
last page when we are truncating to exactly the same size.
The following script was used to quickly measure the time a receive
operation takes:
$ cat test_send.sh
#!/bin/bash
SRC_DEV=/dev/sdc
DST_DEV=/dev/sdd
SRC_MNT=/mnt/sdc
DST_MNT=/mnt/sdd
mkfs.btrfs -f $SRC_DEV >/dev/null
mkfs.btrfs -f $DST_DEV >/dev/null
mount $SRC_DEV $SRC_MNT
mount $DST_DEV $DST_MNT
echo "Creating source filesystem"
for ((t = 0; t < 10; t++)); do
(
for ((i = 1; i <= 20000; i++)); do
xfs_io -f -c "pwrite -S 0xab 0 5000" \
$SRC_MNT/file_$i > /dev/null
done
) &
worker_pids[$t]=$!
done
wait ${worker_pids[@]}
echo "Creating and sending snapshot"
btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
/usr/bin/time -f "send took %e seconds" \
btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
/usr/bin/time -f "receive took %e seconds" \
btrfs receive -f $SRC_MNT/send_file $DST_MNT
umount $SRC_MNT
umount $DST_MNT
The results for 5 runs were the following:
* Without this change
average receive time was 26.49 seconds
standard deviation of 2.53 seconds
* With this change
average receive time was 12.51 seconds
standard deviation of 0.32 seconds
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It doens't make sense to process prealloc extents as pages will be
filled with zero when reading prealloc extents.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have btrfs_fs_info::data_chunk_allocations and
btrfs_fs_info::metadata_ratio declared as unsigned which would be
unsinged int and kernel style prefers unsigned int over bare unsigned.
So this patch changes them to u32.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using any kind of memory barriers around atomic operations which have
a return value is redundant, since those operations themselves are
fully ordered. atomic_t.txt states:
- RMW operations that have a return value are fully ordered;
Fully ordered primitives are ordered against everything prior and
everything subsequent. Therefore a fully ordered primitive is like
having an smp_mb() before and an smp_mb() after the primitive.
Given this let's replace the extra memory barriers with comments.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the same function we just ran btrfs_alloc_device() which means the
btrfs_device::resized_list is sure to be empty and we are protected
with the btrfs_fs_info::volume_mutex.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The __cold functions are placed to a special section, as they're
expected to be called rarely. This could help i-cache prefetches or help
compiler to decide which branches are more/less likely to be taken
without any other annotations needed.
Though we can't add more __exit annotations, it's still possible to add
__cold (that's also added with __exit). That way the following function
categories are tagged:
- printf wrappers, error messages
- exit helpers
Signed-off-by: David Sterba <dsterba@suse.com>
Recently, the __init annotations have been added. There's unfortunatelly
only one case where we can add __exit, because most of the cleanup
helpers are also called from the __init phase.
As the __exit annotated functions get discarded completely for a
built-in code, we'd miss them from the init phase.
Signed-off-by: David Sterba <dsterba@suse.com>
We aren't verifying the parameter passed to the subvolid mount option,
so we won't report and fail the mount if a junk value is specified for
example, -o subvolid=abc.
This patch verifies the subvolid option with match_u64.
Up to now the memparse function accepts the K/M/G/ suffixes, that are
usually meant for size values and do not make sense for a subvolume it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Fstests generic/475 provides a way to fail metadata reads while
checking if checksum exists for the inode inside run_delalloc_nocow(),
and csum_exist_in_range() interprets error (-EIO) as inode having
checksum and makes its caller enter the cow path.
In case of free space inode, this ends up with a warning in
cow_file_range().
The same problem applies to btrfs_cross_ref_exist() since it may also
read metadata in between.
With this, run_delalloc_nocow() bails out when errors occur at the two
places.
cc: <stable@vger.kernel.org> v2.6.28+
Fixes: 17d217fe97 ("Btrfs: fix nodatasum handling in balancing code")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The custom crc32 init code was introduced in
14a958e678 ("Btrfs: fix btrfs boot when compiled as built-in") to
enable using btrfs as a built-in. However, later as pointed out by
60efa5eb2e ("Btrfs: use late_initcall instead of module_init") this
wasn't enough and finally btrfs was switched to late_initcall which
comes after the generic crc32c implementation is initiliased. The
latter commit superseeded the former. Now that we don't have to
maintain our own code let's just remove it and switch to using the
generic implementation.
Despite touching a lot of files the patch is really simple. Here is the gist of
the changes:
1. Select LIBCRC32C rather than the low-level modules.
2. s/btrfs_crc32c/crc32c/g
3. replace hash.h with linux/crc32c.h
4. Move the btrfs namehash funcs to ctree.h and change the tree accordingly.
I've tested this with btrfs being both a module and a built-in and xfstest
doesn't complain.
Does seem to fix the longstanding problem of not automatically selectiong
the crc32c module when btrfs is used. Possibly there is a workaround in
dracut.
The modinfo confirms that now all the module dependencies are there:
before:
depends: zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate
after:
depends: libcrc32c,zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add more info to changelog from mails ]
Signed-off-by: David Sterba <dsterba@suse.com>
Function __get_raid_index() is used to convert block group flags into
raid index, which can be used to get various info directly from
btrfs_raid_array[].
Refactor this function a little:
1) Rename to btrfs_bg_flags_to_raid_index()
Double underline prefix is normally for internal functions, while the
function is used by both extent-tree and volumes.
Although the name is a little longer, but it should explain its usage
quite well.
2) Move it to volumes.h and make it static inline
Just several if-else branches, really no need to define it as a normal
function.
This also makes later code re-use between kernel and btrfs-progs
easier.
3) Remove function get_block_group_index()
Really no need to do such a simple thing as an exported function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When inspecting the error message with real corruption, the "root=%llu"
always shows "1" (root tree), instead of the correct owner.
The problem is that we are getting @root from page->mapping->host, which
points the same btree inode, so we will always get the same root.
This makes the root owner output meaningless, and harder to port
tree-checker to btrfs-progs.
So get rid of the false and meaningless @root parameter and replace it
with @fs_info.
To get the owner, we can only rely on btrfs_header_owner() now.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is adding a tracepoint 'btrfs_handle_em_exist' to help debug the
subtle bugs around merge_extent_mapping.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_run_qgroups is doing a bit too much. Not only is it
responsible for synchronizing in-memory state of qgroups to disk but
it also contains code to trigger the initial qgroup rescan when
quota is enabled initially. This condition is detected by checking that
BTRFS_FS_QUOTA_ENABLED is not set and BTRFS_FS_QUOTA_ENABLING is set.
Nothing really requires from the code to be structured (and scattered)
the way it is so let's streamline things. First move the quota rescan
code into btrfs_quota_enable, where its invocation is closer to the
use. This also makes the FS_QUOTA_ENABLING flag redundant so let's
remove it as well.
This has been tested with a full xfstest run with qgroups enabled on
the scratch device of every xfstest and no regressions were observed.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
load_free_space_tree calls either function load_free_space_bitmaps or
load_free_space_extents. And either of those two will lead to call
btrfs_next_item. So in function load_free_space_tree, use READA_FORWARD
to read forward ahead.
This also changes the value from READA_BACK to READA_FORWARD, since
according to the logic, it should reada_for_search forward, not
backward.
Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
populate_free_space_tree calls function btrfs_search_slot_for_read with
parameter int find_higher = 1, it means that, if no exact match is
found, then use the next higher item. So in function
populate_free_space_tree, use READA_FORWARD to read forward ahead.
This also changes the value from READA_BACK to READA_FORWARD, since
according to the logic, it should reada_for_search forward, not
backward.
Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
delayed_iput_count wa supposed to be used to implement, well, delayed
iput. The idea is that we keep accumulating the number of iputs we do
until eventually the inode is deleted. Turns out we never really
switched the delayed_iput_count from 0 to 1, hence all conditional
code relying on the value of that member being different than 0 was
never executed. This, as it turns out, didn't cause any problem due
to the simple fact that the generic inode's i_count member was always
used to count the number of iputs. So let's just remove the unused
member and all unused code. This patch essentially provides no
functional changes. While at it, also add proper documentation for
btrfs_add_delayed_iput
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
The behavior of btrfs_delalloc_reserve_metadata depends on whether
the inode we are allocating for is the freespace inode or not. As it
stands if we are the free node we set 'flush' and 'delalloc_lock'
variable to certain values. Subsequently we check the values of those
vars and act accordingly. Instead, simplify things by having 1 if
which checks whether we are the freespace inode or not and do any
specific operation in either branches of that if. This makes the code
a bit easier to understand, as an added bonus it also shrinks the
compiled size:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-17 (-17)
Function old new delta
btrfs_delalloc_reserve_metadata 1876 1859 -17
Total: Before=85966, After=85949, chg -0.02%
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add opened device to the tail of dev_alloc_list instead of head, so that
it maintains the same order as dev_list.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
By maintaining the device list sorted lets us reproduce the problems
related to missing chunk in the degraded mode much more consistent. So
fix this by sorting the devices by devid within the kernel. So that we
know which device is assigned to the struct fs_info::latest_bdev when
all the devices are having and same SB generation.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
It's not necessary to hold ->orphan_lock when checking inode's runtime
flags.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of manually fiddling with the state of the task
(RUNNING->INTERRUPTIBLE->RUNNING) again just use schedule_timeout_interruptible
which adjusts the task state as needed. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Even though btrfs_start_dirty_block_groups is fairly in the beginning of
btrfs_commit_transaction outside of the critical section defined by the
transaction states it can only be run by a single comitter. In other
words it defines its own critical section thanks to the
BTRFS_TRANS_DIRTY_BG run flag and ro_block_group_mutex. However, its
error handling is outside of this critical section which is a bit
counter-intuitive. So move the error handling righ after the function is
executed and let the sole runner of dirty block groups handle the return
value. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bio_add_page() can fail for logical reasons as from the bio_add_page()
comments:
/*
* This will only fail if either bio->bi_vcnt == bio->bi_max_vecs or
* it's a cloned bio.
*/
Here we have just allocated the bio, so both of those failures can't
occur. So drop the check. We can also drop the error stats for write
error.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enospc_debug makes extent allocator print more debug messages,
however for chunk allocation, there is no debug message for enospc_debug
at all.
This patch will add message for the following parts of chunk allocator:
1) No rw device at all
Quite rare, but at least output one message for this case.
2) Not enough space for some device
This debug message is quite handy for unbalanced disks with stripe
based profiles (RAID0/10/5/6).
3) Not enough free devices
This debug message should tell us if current chunk allocator is
working correctly under minimal device requirements.
Although in most cases, we will hit other ENOSPC before we even hit a
chunk allocator ENOSPC, but such debug info won't help.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use ASSERT to report logical error in cow_file_range(), also move it a
bit closer to when the num_bytes is derived.
The extent start could be (u64)-1 in some cases, the assert should catch
that we do not accidentally pass it to cow_file_range.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch deletes local variable disk_num_bytes as its value
is same as num_bytes in the function cow_file_range().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit [1] removed the need to use btrfs_async_submit_limit(), so
delete it.
[1]
commit 736cd52e0c
Btrfs: remove nr_async_submits and async_submit_draining
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preempt counter APIs have been split out, currently, hardirq.h just
includes irq_enter/exit APIs which are not used by btrfs at all.
So, remove the unused hardirq.h.
Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when enospc_debug mount option is turned on we do not print
any debug info in case metadata reservation failures happen. Fix this
by adding the necessary hook in reserve_metadata_bytes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The reason why io_bgs can be modified without holding any lock is
non-obvious. Document it and reference that documentation from the
respective call sites.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
list_first_entry is essentially a wrapper over cotnainer_of. The latter
can never return null even if it's working on inconsistent list since it
will either crash or return some offset in the wrong struct.
Additionally, for the dirty_bgs list the iteration is done under
dirty_bgs_lock which ensures consistency of the list.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For debugging or administration purposes, we would want to know if and
when the user cancels the replace, to complement the existing messages
when dev-replace starts or finishes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog, fold fix for RCU warning from Nikolay ]
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba