1
0
Fork 0
Commit Graph

117 Commits (058576ddfb31762bfce70086a3c12678a97c4d75)

Author SHA1 Message Date
David S. Miller b94f1c0904 ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().
And delete rt6_redirect(), since it is no longer used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 00:33:37 -07:00
David S. Miller 1d861aa4b3 inet: Minimize use of cached route inetpeer.
Only use it in the absolutely required cases:

1) COW'ing metrics

2) ipv4 PMTU

3) ipv4 redirects

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10 22:40:11 -07:00
David S. Miller f9242b6b28 inet: Sanitize inet{,6} protocol demux.
Don't pretend that inet_protos[] and inet6_protos[] are hashes, thay
are just a straight arrays.  Remove all unnecessary hash masking.

Document MAX_INET_PROTOS.

Use RAW_HTABLE_SIZE when appropriate.

Reported-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 18:56:21 -07:00
David S. Miller 81aded2467 ipv6: Handle PMTU in ICMP error handlers.
One tricky issue on the ipv6 side vs. ipv4 is that the ICMP callouts
to handle the error pass the 32-bit info cookie in network byte order
whereas ipv4 passes it around in host byte order.

Like the ipv4 side, we have two helper functions.  One for when we
have a socket context and one for when we do not.

ip6ip6 tunnels are not handled here, because they handle PMTU events
by essentially relaying another ICMP packet-too-big message back to
the original sender.

This patch allows us to get rid of rt6_do_pmtu_disc().  It handles all
kinds of situations that simply cannot happen when we do the PMTU
update directly using a fully resolved route.

In fact, the "plen == 128" check in ip6_rt_update_pmtu() can very
likely be removed or changed into a BUG_ON() check.  We should never
have a prefixed ipv6 route when we get there.

Another piece of strange history here is that TCP and DCCP, unlike in
ipv4, never invoke the update_pmtu() method from their ICMP error
handlers.  This is incredibly astonishing since this is the context
where we have the most accurate context in which to make a PMTU
update, namely we have a fully connected socket and associated cached
socket route.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-15 14:54:11 -07:00
David S. Miller fbfe95a42e inet: Create and use rt{,6}_get_peer_create().
There's a lot of places that open-code rt{,6}_get_peer() only because
they want to set 'create' to one.  So add an rt{,6}_get_peer_create()
for their sake.

There were also a few spots open-coding plain rt{,6}_get_peer() and
those are transformed here as well.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-08 23:24:18 -07:00
Eric Dumazet a50feda546 ipv6: bool/const conversions phase2
Mostly bool conversions, some inline removals and const additions.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19 01:08:16 -04:00
Joe Perches f32138319c net: ipv6: Standardize prefixes for message logging
Add #define pr_fmt(fmt) as appropriate.

Add "IPv6: " to appropriate files.

Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG).
Standardize on "%s: " not "%s(): " when emitting __func__.
Use "%s: ", __func__ instead of embedding function name.
Coalesce formats, align arguments.

ADDRCONF output is now prefixed with "IPv6: "

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16 01:01:03 -04:00
David S. Miller 06eb4eafbd Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2012-04-10 14:30:45 -04:00
Eldad Zack a2d91a09da net/ipv6/icmp.c: Checkpatch cleanups
icmp.c:501: ERROR: "(foo*)" should be "(foo *)"
icmp.c:582: ERROR: "(foo*)" should be "(foo *)"
icmp.c:954: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02 04:33:46 -04:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Erich E. Hoover c4062dfc42 ipv6: Implement IPV6_UNICAST_IF socket option.
The IPV6_UNICAST_IF feature is the IPv6 compliment to IP_UNICAST_IF.

Signed-off-by: Erich E. Hoover <ehoover@mines.edu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-08 15:52:45 -05:00
Jesse Gross 75f2811c64 ipv6: Add fragment reporting to ipv6_skip_exthdr().
While parsing through IPv6 extension headers, fragment headers are
skipped making them invisible to the caller.  This reports the
fragment offset of the last header in order to make it possible to
determine whether the packet is fragmented and, if so whether it is
a first or last fragment.

Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-12-03 09:35:10 -08:00
Alexey Dobriyan 4e3fd7a06d net: remove ipv6_addr_copy()
C assignment can handle struct in6_addr copying.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22 16:43:32 -05:00
Eric Dumazet 87fb4b7b53 net: more accurate skb truesize
skb truesize currently accounts for sk_buff struct and part of skb head.
kmalloc() roundings are also ignored.

Considering that skb_shared_info is larger than sk_buff, its time to
take it into account for better memory accounting.

This patch introduces SKB_TRUESIZE(X) macro to centralize various
assumptions into a single place.

At skb alloc phase, we put skb_shared_info struct at the exact end of
skb head, to allow a better use of memory (lowering number of
reallocations), since kmalloc() gives us power-of-two memory blocks.

Unless SLUB/SLUB debug is active, both skb->head and skb_shared_info are
aligned to cache lines, as before.

Note: This patch might trigger performance regressions because of
misconfigured protocol stacks, hitting per socket or global memory
limits that were previously not reached. But its a necessary step for a
more accurate memory accounting.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Andi Kleen <ak@linux.intel.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13 16:05:07 -04:00
Eric Dumazet cfdf76474e ipv6: some RCU conversions
ICMP and ND are not fast path, but still we can avoid changing idev
refcount, using RCU.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-01 00:12:00 -07:00
Eric Dumazet b71d1d426d inet: constify ip headers and in6_addr
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers
where possible, to make code intention more obvious.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 11:04:14 -07:00
David S. Miller 1958b856c1 net: Put fl6_* macros to struct flowi6 and use them again.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:55 -08:00
David S. Miller 4c9483b2fb ipv6: Convert to use flowi6 where applicable.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:54 -08:00
David S. Miller 6281dcc94a net: Make flowi ports AF dependent.
Create two sets of port member accessors, one set prefixed by fl4_*
and the other prefixed by fl6_*

This will let us to create AF optimal flow instances.

It will work because every context in which we access the ports,
we have to be fully aware of which AF the flowi is anyways.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:46 -08:00
David S. Miller 1d28f42c1b net: Put flowi_* prefix on AF independent members of struct flowi
I intend to turn struct flowi into a union of AF specific flowi
structs.  There will be a common structure that each variant includes
first, much like struct sock_common.

This is the first step to move in that direction.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 15:08:44 -08:00
David S. Miller 452edd598f xfrm: Return dst directly from xfrm_lookup()
Instead of on the stack.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02 13:27:41 -08:00
David S. Miller b42835dbe8 ipv6: Make icmp route lookup code a bit clearer.
The route lookup code in icmpv6_send() is slightly tricky as a result of
having to handle all of the requirements of RFC 4301 host relookups.

Pull the route resolution into a seperate function, so that the error
handling and route reference counting is hopefully easier to see and
contained wholly within this new routine.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01 22:07:37 -08:00
David S. Miller 92d8682926 inetpeer: Move ICMP rate limiting state into inet_peer entries.
Like metrics, the ICMP rate limiting bits are cached state about
a destination.  So move it into the inet_peer entries.

If an inet_peer cannot be bound (the reason is memory allocation
failure or similar), the policy is to allow.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04 15:59:53 -08:00
Eric Dumazet 00d9d6a185 ipv6: fix ICMP6_MIB_OUTERRORS
In commit 1f8438a853 (icmp: Account for ICMP out errors), I did a typo
on IPV6 side, using ICMP6_MIB_OUTMSGS instead of ICMP6_MIB_OUTERRORS

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-09 18:39:27 -07:00
Brian Haley 13b52cd446 IPv6: Add dontfrag argument to relevant functions
Add dontfrag argument to relevant functions for
IPV6_DONTFRAG support, as well as allowing the value
to be passed-in via ancillary cmsg data.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 23:35:28 -07:00
David S. Miller 871039f02f Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/stmmac/stmmac_main.c
	drivers/net/wireless/wl12xx/wl1271_cmd.c
	drivers/net/wireless/wl12xx/wl1271_main.c
	drivers/net/wireless/wl12xx/wl1271_spi.c
	net/core/ethtool.c
	net/mac80211/scan.c
2010-04-11 14:53:53 -07:00
Eric Dumazet 1f8438a853 icmp: Account for ICMP out errors
When ip_append() fails because of socket limit or memory shortage,
increment ICMP_MIB_OUTERRORS counter, so that "netstat -s" can report
these errors.

LANG=C netstat -s | grep "ICMP messages failed"
    0 ICMP messages failed

For IPV6, implement ICMP6_MIB_OUTERRORS counter as well.

# grep Icmp6OutErrors /proc/net/dev_snmp6/*
/proc/net/dev_snmp6/eth0:Icmp6OutErrors                   	0
/proc/net/dev_snmp6/lo:Icmp6OutErrors                   	0

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 15:09:04 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Alexey Dobriyan 3ffe533c87 ipv6: drop unused "dev" arg of icmpv6_send()
Dunno, what was the idea, it wasn't used for a long time.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18 14:30:17 -08:00
Alexey Dobriyan bc417d99bf ipv6: remove stale MIB definitions
ICMP6 MIB statistics was per-netns for quite a time.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18 14:30:16 -08:00
Alexey Dobriyan 2c8c1e7297 net: spread __net_init, __net_exit
__net_init/__net_exit are apparently not going away, so use them
to full extent.

In some cases __net_init was removed, because it was called from
__net_exit code.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 19:16:02 -08:00
Eric W. Biederman f8572d8f2a sysctl net: Remove unused binary sysctl code
Now that sys_sysctl is a compatiblity wrapper around /proc/sys
all sysctl strategy routines, and all ctl_name and strategy
entries in the sysctl tables are unused, and can be
revmoed.

In addition neigh_sysctl_register has been modified to no longer
take a strategy argument and it's callers have been modified not
to pass one.

Cc: "David Miller" <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-12 02:05:06 -08:00
Alexey Dobriyan 41135cc836 net: constify struct inet6_protocol
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14 17:03:05 -07:00
Gerrit Renker e651f03afe inet6: Conversion from u8 to int
This replaces assignments of the type "int on LHS" = "u8 on RHS" with
simpler code. The LHS can express all of the unsigned right hand side
values, hence the assigned value can not be negative.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13 16:43:31 -07:00
Brian Haley d5fdd6babc ipv6: Use correct data types for ICMPv6 type and code
Change all the code that deals directly with ICMPv6 type and code
values to use u8 instead of a signed int as that's the actual data
type.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-23 04:31:07 -07:00
Jiri Pirko 6c06a478c9 net: fix xfrm reverse flow lookup for icmp6
This patch fixes the xfrm reverse flow lookup for icmp6 so that icmp6 packets
don't get lost over ipsec tunnels. Similar patch is in RHEL5 kernel for a quite
long time and I do not see why it isn't in mainline.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-27 22:30:19 -08:00
Alexey Dobriyan 52479b623d netns xfrm: lookup in netns
Pass netns to xfrm_lookup()/__xfrm_lookup(). For that pass netns
to flow_cache_lookup() and resolver callback.

Take it from socket or netdevice. Stub DECnet to init_net.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 17:35:18 -08:00
Joe Perches 07f0757a68 include/net net/ - csum_partial - remove unnecessary casts
The first argument to csum_partial is const void *
casts to char/u8 * are not necessary

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 15:44:53 -08:00
Alexey Dobriyan 6d9f239a1e net: '&' redux
I want to compile out proc_* and sysctl_* handlers totally and
stub them to NULL depending on config options, however usage of &
will prevent this, since taking adress of NULL pointer will break
compilation.

So, drop & in front of every ->proc_handler and every ->strategy
handler, it was never needed in fact.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03 18:21:05 -08:00
Harvey Harrison 5b095d9892 net: replace %p6 with %pI6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 12:52:50 -07:00
Harvey Harrison 0c6ce78abf net: replace uses of NIP6_FMT with %p6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 23:02:31 -07:00
Alexey Dobriyan def8b4faff net: reduce structures when XFRM=n
ifdef out
* struct sk_buff::sp		(pointer)
* struct dst_entry::xfrm	(pointer)
* struct sock::sk_policy	(2 pointers)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28 13:24:06 -07:00
Denis V. Lunev 55d43808eb ipv6: added net argument to ICMP6MSGIN_INC_STATS_BH
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:15:46 -07:00
Denis V. Lunev e41b5368e0 ipv6: added net argument to ICMP6_INC_STATS_BH
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 11:14:13 -07:00
Denis V. Lunev 3bd653c845 netns: add net parameter to IP6_INC_STATS
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 10:54:51 -07:00
Denis V. Lunev fdc0bde90a icmp: icmp_sk() should not use smp_processor_id() in preemptible code
Pass namespace into icmp_xmit_lock, obtain socket inside and return
it as a result for caller.

Thanks Alexey Dobryan for this report:

Steps to reproduce:

	CONFIG_PREEMPT=y
	CONFIG_DEBUG_PREEMPT=y
	tracepath <something>

BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205
caller is icmp_sk+0x15/0x30
Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1

Call Trace:
 [<ffffffff8031af14>] debug_smp_processor_id+0xe4/0xf0
 [<ffffffff80409405>] icmp_sk+0x15/0x30
 [<ffffffff8040a17b>] icmp_send+0x4b/0x3f0
 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160
 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff8023a475>] ? local_bh_enable_ip+0x95/0x110
 [<ffffffff804285b9>] ? _spin_unlock_bh+0x39/0x40
 [<ffffffff8025a26c>] ? mark_held_locks+0x4c/0x90
 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160
 [<ffffffff803e91b4>] ip_fragment+0x8d4/0x900
 [<ffffffff803e7030>] ? ip_finish_output2+0x0/0x290
 [<ffffffff803e91e0>] ? ip_finish_output+0x0/0x60
 [<ffffffff803e6650>] ? dst_output+0x0/0x10
 [<ffffffff803e922c>] ip_finish_output+0x4c/0x60
 [<ffffffff803e92e3>] ip_output+0xa3/0xf0
 [<ffffffff803e68d0>] ip_local_out+0x20/0x30
 [<ffffffff803e753f>] ip_push_pending_frames+0x27f/0x400
 [<ffffffff80406313>] udp_push_pending_frames+0x233/0x3d0
 [<ffffffff804067d1>] udp_sendmsg+0x321/0x6f0
 [<ffffffff8040d155>] inet_sendmsg+0x45/0x80
 [<ffffffff803b967f>] sock_sendmsg+0xdf/0x110
 [<ffffffff8024a100>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff80257ce5>] ? validate_chain+0x415/0x1010
 [<ffffffff8027dc10>] ? __do_fault+0x140/0x450
 [<ffffffff802597d0>] ? __lock_acquire+0x260/0x590
 [<ffffffff803b9e55>] ? sockfd_lookup_light+0x45/0x80
 [<ffffffff803ba50a>] sys_sendto+0xea/0x120
 [<ffffffff80428e42>] ? _spin_unlock_irqrestore+0x42/0x80
 [<ffffffff803134bc>] ? __up_read+0x4c/0xb0
 [<ffffffff8024e0c6>] ? up_read+0x26/0x30
 [<ffffffff8020b8bb>] system_call_fastpath+0x16/0x1b

icmp6_sk() is similar.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-23 04:43:33 -07:00
Stephen Hemminger 6dbf4bcac9 icmp: fix units for ratelimit
Convert the sysctl values for icmp ratelimit to use milliseconds instead
of jiffies which is based on kernel configured HZ.
Internal kernel jiffies are not a proper unit for any userspace API.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-01 19:29:07 -07:00
Adrian Bunk 0b04082995 net: remove CVS keywords
This patch removes CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11 21:00:38 -07:00
David S. Miller df39e8ba56 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/ehea/ehea_main.c
	drivers/net/wireless/iwlwifi/Kconfig
	drivers/net/wireless/rt2x00/rt61pci.c
	net/ipv4/inet_timewait_sock.c
	net/ipv6/raw.c
	net/mac80211/ieee80211_sta.c
2008-04-14 02:30:23 -07:00
Denis V. Lunev 1ed8516f09 [IPV6]: Simplify IPv6 control sockets creation.
Do this by replacing sock_create_kern with inet_ctl_sock_create.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-03 14:31:03 -07:00