With the movement of lots of stuff out of perf.h to other headers we
ended up not needing it in lots of places, remove it from those places.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c718m0sxxwp73lp9d8vpihb4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Expose the aux_output attribute flag to the user to configure, by adding a
config term 'aux-output'. For events that support it, selection of
'aux-output' causes the generation of AUX records instead of event records.
This requires that an AUX area event is also provided.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-7-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the nr_members member from perf's evsel to libperf's perf_evsel.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-60-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mov the 'cpus' field from tools/perf's evsel to libperf's perf_evsel.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-51-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving the following functions from tools/perf:
cpu_map__new()
cpu_map__read()
to libperf with the following names:
perf_cpu_map__new()
perf_cpu_map__read()
Committer notes:
Fixed up this one:
tools/perf/arch/arm/util/cs-etm.c
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-44-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'.
Committer notes:
Fixed up these:
tools/perf/arch/arm/util/auxtrace.c
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/arm-spe.c
tools/perf/arch/s390/util/auxtrace.c
tools/perf/util/cs-etm.c
Also
cc1: warnings being treated as errors
tests/sample-parsing.c: In function 'do_test':
tests/sample-parsing.c:162: error: missing initializer
tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus')
struct evsel evsel = {
.needs_swap = false,
- .core.attr = {
- .sample_type = sample_type,
- .read_format = read_format,
+ .core = {
+ . attr = {
+ .sample_type = sample_type,
+ .read_format = read_format,
+ },
[perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1
gcc (GCC) 4.4.7
Also we don't need to include perf_event.h in
tools/perf/lib/include/perf/evsel.h, forward declaring 'struct
perf_event_attr' is enough. And this even fixes the build in some
systems where things are used somewhere down the include path from
perf_event.h without defining __always_inline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move nr_entries count from 'struct perf' to into perf_evlist struct.
Committer notes:
Fix tools/perf/arch/s390/util/auxtrace.c case. And also the comment in
tools/perf/util/annotate.h.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-42-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Include perf_evlist in the evlist object, will continue to move other
generic things into libperf's perf_evlist.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-37-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Including perf_evsel in evsel object, will continue to move other
generic things into libperf's perf_evsel struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-36-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the following functions:
thread_map__get()
thread_map__put()
thread_map__comm()
to libperf with the following names:
perf_thread_map__get()
perf_thread_map__put()
perf_thread_map__comm()
Add the perf_thread_map__comm() function for it to work/compile.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-34-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving the following functions:
cpu_map__get()
cpu_map__put()
to libperf with following names:
perf_cpu_map__get()
perf_cpu_map__put()
Committer notes:
Added fixes for arm/arm64
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-31-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evsel__open() to evsel__open(), so we don't have a name
clash when we add perf_evsel__open() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evsel__new() to evsel__new(), so we don't have a name clash
when we add perf_evsel__new() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remame perf_evsel__delete() to evsel__delete(), so we don't have a name
clash when we add perf_evsel__delete() in libperf.
Also renaming perf_evsel__delete_priv() to evsel__delete_priv().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evlist__delete() to evlist__delete(), so we don't have a
name clash when we add perf_evlist__delete() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.
Committer notes:
Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct thread_map to struct perf_thread_map, so it could be part
of libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct cpu_map to struct perf_cpu_map, so it could be part of
libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We may want to get to this bpf_object, to search for other BPF programs,
etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3y8hrb6lszjfi23vjlic3cib@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With BPF_MAP_TYPE_PROG_ARRAY + bpf_tail_call() we want to have BPF
programs, i.e. functions in a object file that perf's BPF loader
shouldn't try to attach to anything, i.e. "!syscalls:sys_enter_open"
should just stay there, not be attached to a tracepoint with that name,
it'll be used by, for instance, 'perf trace' to associate with syscalls
that copy, in addition to the syscall raw args, a filename pointed by
the first arg, i.e. multiple syscalls that need copying the same pointer
arg in the same way, as a filename, for instance, will share the same
BPF program/function.
Right now when perf's BPF loader sees a function with a name
"sys:name" it'll look for a tracepoint and will associate that BPF
program with it, say:
SEC("raw_syscalls:sys_enter")
int sys_enter(struct syscall_enter_args *args)
{
//SNIP
}
Will crate a perf_evsel tracepoint event and then associate with it that
BPF program.
This convention at some point will switch to the one used by the BPF
loader in libbpf, but to experiment with BPF_MAP_TYPE_PROG_ARRAY in
'perf trace' lets do this, that will not require changing too much
stuff.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lk6dasjr1yf9rtvl292b2hpc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow for destructors to check if they're operating on a object still
in a list, and to avoid going from use after free list entries into
still valid, or even also other already removed from list entries.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-deh17ub44atyox3j90e6rksu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'percore' event qualifier, like cpu/event=0,umask=0x3,percore=1/,
that sums up the event counts for both hardware threads in a core.
We can already do this with --per-core, but it's often useful to do
this together with other metrics that are collected per hardware thread.
So we need to support this per-core counting on a event level.
This can be implemented in only the user tool, no kernel support needed.
v4:
---
1. Add Arnaldo's patch which updates the documentation for
this new qualifier.
2. Rebase to latest perf/core branch
v3:
---
Simplify the code according to Jiri's comments.
Before:
"return term->val.percore ? true : false;"
Now:
"return term->val.percore;"
v2:
---
Change the qualifier name from 'coresum' to 'percore' according to
comments from Jiri and Andi.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1555077590-27664-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support in 'perf list' to output tool internal events, currently
only 'duration_time'.
Committer testing:
$ perf list dur*
List of pre-defined events (to be used in -e):
duration_time [Tool event]
Metric Groups:
$ perf list sw
List of pre-defined events (to be used in -e):
alignment-faults [Software event]
bpf-output [Software event]
context-switches OR cs [Software event]
cpu-clock [Software event]
cpu-migrations OR migrations [Software event]
dummy [Software event]
emulation-faults [Software event]
major-faults [Software event]
minor-faults [Software event]
page-faults OR faults [Software event]
task-clock [Software event]
duration_time [Tool event]
$ perf list | grep duration
duration_time [Tool event]
[L1D miss outstandings duration in cycles]
page walk duration are excluded in Skylake]
load. EPT page walk duration are excluded in Skylake]
page walk duration are excluded in Skylake]
store. EPT page walk duration are excluded in Skylake]
(instruction fetch) request. EPT page walk duration are excluded in
instruction fetch request. EPT page walk duration are excluded in
$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190326221823.11518-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf metric expression use 'duration_time' internally to normalize
events. Normal 'perf stat' without -x also prints the duration time.
But when using -x, the interval is not output anywhere, which is
inconvenient for any post processing which often wants to normalize
values to time.
So implement 'duration_time' as a proper perf event that can be
specified explicitely with -e.
The previous implementation of 'duration_time' only worked for metric
processing. This adds the concept of a tool event that is handled by the
tool. On the kernel level it is still mapped to the dummy software
event, but the values are not read anymore, but instead computed by the
tool.
Add proper plumbing to handle this in the event parser, and display it
in 'perf stat'. We don't want 'duration_time' to be added up, so it's
only printed for the first CPU.
% perf stat -e duration_time,cycles true
Performance counter stats for 'true':
555,476 ns duration_time
771,958 cycles
0.000555476 seconds time elapsed
0.000644000 seconds user
0.000000000 seconds sys
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190326221823.11518-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Detected with gcc's ASan:
Direct leak of 4356 byte(s) in 120 object(s) allocated from:
#0 0x7ff1a2b5a070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070)
#1 0x55719aef4814 in build_id_cache__origname util/build-id.c:215
#2 0x55719af649b6 in print_sdt_events util/parse-events.c:2339
#3 0x55719af66272 in print_events util/parse-events.c:2542
#4 0x55719ad1ecaa in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58
#5 0x55719aec745d in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#6 0x55719aec7d1a in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#7 0x55719aec8184 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#8 0x55719aeca41a in main /home/changbin/work/linux/tools/perf/perf.c:520
#9 0x7ff1a07ae09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 40218daea1 ("perf list: Show SDT and pre-cached events")
Link: http://lkml.kernel.org/r/20190316080556.3075-7-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Detected via gcc's ASan:
Direct leak of 2048 byte(s) in 64 object(s) allocated from:
6 #0 0x7f606512e370 in __interceptor_realloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee370)
7 #1 0x556b0f1d7ddd in thread_map__realloc util/thread_map.c:43
8 #2 0x556b0f1d84c7 in thread_map__new_by_tid util/thread_map.c:85
9 #3 0x556b0f0e045e in is_event_supported util/parse-events.c:2250
10 #4 0x556b0f0e1aa1 in print_hwcache_events util/parse-events.c:2382
11 #5 0x556b0f0e3231 in print_events util/parse-events.c:2514
12 #6 0x556b0ee0a66e in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58
13 #7 0x556b0f01e0ae in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
14 #8 0x556b0f01e859 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
15 #9 0x556b0f01edc8 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
16 #10 0x556b0f01f71f in main /home/changbin/work/linux/tools/perf/perf.c:520
17 #11 0x7f6062ccf09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 89896051f8 ("perf tools: Do not put a variable sized type not at the end of a struct")
Link: http://lkml.kernel.org/r/20190316080556.3075-3-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.
This fixes this warning on an Alpine Linux Edge system with gcc 8.2:
util/parse-events.c: In function 'print_symbol_events':
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'print_symbol_events.constprop',
inlined from 'print_events' at util/parse-events.c:2508:2:
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'print_symbol_events.constprop',
inlined from 'print_events' at util/parse-events.c:2511:2:
util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
strncpy(name, syms->symbol, MAX_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 947b4ad1d1 ("perf list: Fix max event string size")
Link: https://lkml.kernel.org/n/tip-b663e33bm6x8hrkie4uxh7u2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This simply adds the field to 'struct perf_evsel' and allows setting
it via the event parser, to test it lets trace trace:
First look at where in a function that receives an evsel we can put a probe
to read how evsel->max_events was setup:
# perf probe -x ~/bin/perf -L trace__event_handler
<trace__event_handler@/home/acme/git/perf/tools/perf/builtin-trace.c:0>
0 static int trace__event_handler(struct trace *trace, struct perf_evsel *evsel,
union perf_event *event __maybe_unused,
struct perf_sample *sample)
3 {
4 struct thread *thread = machine__findnew_thread(trace->host, sample->pid, sample->tid);
5 int callchain_ret = 0;
7 if (sample->callchain) {
8 callchain_ret = trace__resolve_callchain(trace, evsel, sample, &callchain_cursor);
9 if (callchain_ret == 0) {
10 if (callchain_cursor.nr < trace->min_stack)
11 goto out;
12 callchain_ret = 1;
}
}
See what variables we can probe at line 7:
# perf probe -x ~/bin/perf -V trace__event_handler:7
Available variables at trace__event_handler:7
@<trace__event_handler+89>
int callchain_ret
struct perf_evsel* evsel
struct perf_sample* sample
struct thread* thread
struct trace* trace
union perf_event* event
Add a probe at that line asking for evsel->max_events to be collected and named
as "max_events":
# perf probe -x ~/bin/perf trace__event_handler:7 'max_events=evsel->max_events'
Added new event:
probe_perf:trace__event_handler (on trace__event_handler:7 in /home/acme/bin/perf with max_events=evsel->max_events)
You can now use it in all perf tools, such as:
perf record -e probe_perf:trace__event_handler -aR sleep 1
Now use 'perf trace', here aliased to just 'trace' and trace trace, i.e.
the first 'trace' is tracing just that 'probe_perf:trace__event_handler' event,
while the traced trace is tracing all scheduler tracepoints, will stop at two
events (--max-events 2) and will just set evsel->max_events for all the sched
tracepoints to 9, we will see the output of both traces intermixed:
# trace -e *perf:*event_handler trace --max-events 2 -e sched:*/nr=9/
0.000 :0/0 sched:sched_waking:comm=rcu_sched pid=10 prio=120 target_cpu=000
0.009 :0/0 sched:sched_wakeup:comm=rcu_sched pid=10 prio=120 target_cpu=000
0.000 trace/23949 probe_perf:trace__event_handler:(48c34a) max_events=0x9
0.046 trace/23949 probe_perf:trace__event_handler:(48c34a) max_events=0x9
#
Now, if the traced trace sends its output to /dev/null, we'll see just
what the first level trace outputs: that evsel->max_events is indeed
being set to 9:
# trace -e *perf:*event_handler trace -o /dev/null --max-events 2 -e sched:*/nr=9/
0.000 trace/23961 probe_perf:trace__event_handler:(48c34a) max_events=0x9
0.030 trace/23961 probe_perf:trace__event_handler:(48c34a) max_events=0x9
#
Now that we can set evsel->max_events, we can go to the next step, honour that
per-event property in 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-og00yasj276joem6e14l1eas@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the second version of a patch that improves the error message of
the perf events parser when the PMU hardware does not support address
filters.
Previously, the perf returned the following error:
$ perf record -e intel_pt// --filter 'filter sys_write'
--filter option should follow a -e tracepoint or HW tracer option
This implies there is some syntax error present in the command line,
which is not true. Rather, notify the user that the CPU does not have
support for this feature.
For example, Intel chips based on the Broadwell micro-archticture have
the Intel PT PMU, but do not support address filtering.
Now, perf prints the following error message:
$ perf record -e intel_pt// --filter 'filter sys_write'
This CPU does not support address filtering
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180704121345.19025-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That takes care of using the right call to get the tracing_path
directory, the one that will end up calling tracing_path_set() to figure
out where tracefs is mounted.
One more step in doing just lazy reading of system structures to reduce
the number of operations done unconditionaly at 'perf' start.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-42zzi0f274909bg9mxzl81bu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of accessing the trace_events_path variable directly, that may
not have been properly initialized wrt detecting where tracefs is
mounted.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-id7hzn1ydgkxbumeve5wapqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using for_each_event() we needlessly rebuild the whole path to
the tracepoint directory, reuse the dir_path instead, saving some cycles
and reducing the size of the next patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-54bcs15n0cp6gwcgpc4hptyc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:
perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
# time counts unit events
1.000447342 <not counted> unc_m_cas_count.all
1.000447342 <not counted> unc_m_clockticks
2.000740654 <not counted> unc_m_cas_count.all
2.000740654 <not counted> unc_m_clockticks
The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.
An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.
The right way is to split the big group into multiple small groups which
only include the events from the same PMU.
Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.
With the patch:
# time counts unit events
1.001557653 140,833 unc_m_cas_count.all
1.001557653 1,330,231,332 unc_m_clockticks
2.002709483 85,007 unc_m_cas_count.all
2.002709483 1,429,494,563 unc_m_clockticks
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is not specific to BPF but was found when parsing a .c BPF proggie
that while valid, had no events attached to tracepoints, kprobes, etc:
Very minimal file that perf's BPF code can compile:
# cat empty.c
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE;
#
Before this patch:
# perf trace -e empty.c
WARNING: event parser found nothinginvalid or unsupported event: 'empty.c'
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
After:
# perf trace -e empty.c
WARNING: event parser found nothing
invalid or unsupported event: 'empty.c'
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8ysughiz00h6mjpcot04qyjj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:
tests/mem.c: In function ‘check’:
tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
snprintf(failure, sizeof failure, "unexpected %s", out);
The gcc docs says:
To avoid the warning either use a bigger buffer or handle the
function's return value which indicates whether or not its output
has been truncated.
Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Auto-merge for these events was disabled when auto-merging of non-alias
events was disabled in commit 63ce844 (perf stat: Only auto-merge events
that are PMU aliases).
Non-merging of legacy events is preserved:
$ perf stat -ag -e cache-misses,cache-misses sleep 1
Performance counter stats for 'system wide':
86,323 cache-misses
86,323 cache-misses
1.002623307 seconds time elapsed
But prefix or glob matching auto-merges the events created:
$ perf stat -a -e l3cache/read-miss/ sleep 1
Performance counter stats for 'system wide':
328 l3cache/read-miss/
1.002627008 seconds time elapsed
$ perf stat -a -e l3cache_0_[01]/read-miss/ sleep 1
Performance counter stats for 'system wide':
172 l3cache/read-miss/
1.002627008 seconds time elapsed
As with events created with aliases, auto-merging can be suppressed with
the --no-merge option:
$ perf stat -a -e l3cache/read-miss/ --no-merge sleep 1
Performance counter stats for 'system wide':
67 l3cache/read-miss/
67 l3cache/read-miss/
63 l3cache/read-miss/
60 l3cache/read-miss/
1.002622192 seconds time elapsed
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I0a47eed54c05e1982ca964d743b37f50f60c508c
Link: http://lkml.kernel.org/r/1520345084-42646-4-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To simplify creation of events accross multiple instances of the same
type of PMU stat supports two methods for creating multiple events from
a single event specification:
1. A prefix or glob can be used in the PMU name.
2. Aliases, which are listed immediately after the Kernel PMU events
by perf list, are used.
When the --no-merge option is passed and these events are displayed
individually the PMU name is lost and it's not possible to see which
count corresponds to which pmu:
$ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null
Performance counter stats for 'system wide':
67 l3cache/read-miss/
67 l3cache/read-miss/
63 l3cache/read-miss/
60 l3cache/read-miss/
0.001675706 seconds time elapsed
$ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null
Performance counter stats for 'system wide':
12 l3cache_read_miss
17 l3cache_read_miss
10 l3cache_read_miss
8 l3cache_read_miss
0.001661305 seconds time elapsed
This change adds the original pmu name to the event. For dynamic pmu
events the pmu name is restored in the event name:
$ perf stat -a -e l3cache/read-miss/ --no-merge ls > /dev/null
Performance counter stats for 'system wide':
63 l3cache_0_3/read-miss/
74 l3cache_0_1/read-miss/
64 l3cache_0_2/read-miss/
74 l3cache_0_0/read-miss/
0.001675706 seconds time elapsed
For alias events the name is added after the event name:
$ perf stat -a -e l3cache_read_miss --no-merge ls > /dev/null
Performance counter stats for 'system wide':
10 l3cache_read_miss [l3cache_0_3]
12 l3cache_read_miss [l3cache_0_1]
10 l3cache_read_miss [l3cache_0_2]
17 l3cache_read_miss [l3cache_0_0]
0.001661305 seconds time elapsed
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Timur Tabi <timur@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Change-Id: I8056b9eda74bda33e95065056167ad96e97cb1fb
Link: http://lkml.kernel.org/r/1520345084-42646-3-git-send-email-agustinv@codeaurora.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not needed there, fixup the places where it is needed and was getting
only by luck via evlist.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yxjpetn64z8vjuguu84gr6x6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Intel PMU event aliases have a implicit period= specifier to set the
default period.
Unfortunately this breaks overriding these periods with -c or -F,
because the alias terms look like they are user specified to the
internal parser, and user specified event qualifiers override the
command line options.
Track that they are coming from aliases by adding a "weak" state to the
term. Any weak terms don't override command line options.
I only did it for -c/-F for now, I think that's the only case that's
broken currently.
Before:
$ perf record -c 1000 -vv -e uops_issued.any
...
{ sample_period, sample_freq } 2000003
After:
$ perf record -c 1000 -vv -e uops_issued.any
...
{ sample_period, sample_freq } 1000
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171020202755.21410-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a PMU is missing print a better error message mentioning
the missing PMU.
% mkdir empty
% mount --bind empty /sys/devices/msr
% perf stat -M Summary true
event syntax error: '{inst_retired.any,cycles}:W,{cpu_clk_unhalted.thread}:W,{inst_retired.any}:W,{cpu_clk_unhalted.ref_tsc,msr/tsc/}:W,{fp_comp_ops_exe.sse_scalar..'
\___ Cannot find PMU `msr'. Missing kernel support?
It still cannot find the right column for aliases, but it's already a vast improvement.
v2: Check asprintf
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170913215006.32222-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add code to perf list to print metric groups, and metrics
that don't have an event name. The metricgroup code collects
the eventgroups and events into a rblist, and then prints
them according to the configured filters.
The metricgroups are printed by default, but can be
limited by perf list metric or perf list metricgroup
% perf list metricgroup
..
Metric Groups:
DSB:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
FLOPS:
GFLOPs
[Giga Floating Point Operations Per Second]
Frontend:
IFetch_Line_Utilization
[Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions]
Frontend_Bandwidth:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
Memory_BW:
MLP
[Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)]
v2: Check return value of asprintf to fix warning on FC26
Fix key in lookup/addition for the groups list
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170831194036.30146-8-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setting up groups can be complicated due to the complicated scheduling
restrictions of different PMUs.
User tools usually don't understand all these restrictions.
Still in many cases it is useful to set up groups and they work most of
the time. However if the group is set up wrong some members will not
report any value because they never get scheduled.
Add a concept of a 'weak group': try to set up a group, but if it's not
schedulable fallback to not using a group. That gives us the best of
both worlds: groups if they work, but still a usable fallback if they
don't.
In theory it would be possible to have more complex fallback strategies
(e.g. try to split the group in half), but the simple fallback of not
using a group seems to work for now.
So far the weak group is only implemented for perf stat, not for record.
Here's an unschedulable group (on IvyBridge with SMT on)
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
73,806,067 branches
4,848,144 branch-misses # 6.57% of all branches
14,754,458 l1d.replacement
24,905,558 l2_lines_in.all
<not supported> l2_rqsts.all_code_rd <------- will never report anything
With the weak group:
% perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}:W' -a sleep 1
125,366,055 branches (80.02%)
9,208,402 branch-misses # 7.35% of all branches (80.01%)
24,560,249 l1d.replacement (80.00%)
43,174,971 l2_lines_in.all (80.05%)
31,891,457 l2_rqsts.all_code_rd (79.92%)
The extra event scheduled with some extra multiplexing
v2: Move fallback code to separate function.
Add comment on for_each_group_member
Adjust to new perf_evsel__close interface
v3: Fix debug print out.
Committer testing:
Before:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> branches
<not counted> branch-misses
<not counted> l1d.replacement
<not counted> l2_lines_in.all
<not supported> l2_rqsts.all_code_rd
1.002147212 seconds time elapsed
# perf stat -e '{branches,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}' -a sleep 1
Performance counter stats for 'system wide':
83,207,892 branches
11,065,444 l1d.replacement
28,484,024 l2_lines_in.all
12,186,179 l2_rqsts.all_code_rd
1.001739493 seconds time elapsed
After:
# perf stat -e '{branches,branch-misses,l1d.replacement,l2_lines_in.all,l2_rqsts.all_code_rd}':W -a sleep 1
Performance counter stats for 'system wide':
543,323,909 branches (80.01%)
27,100,512 branch-misses # 4.99% of all branches (80.02%)
50,402,905 l1d.replacement (80.03%)
67,385,892 l2_lines_in.all (80.01%)
21,352,885 l2_rqsts.all_code_rd (79.94%)
1.001086658 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170831194036.30146-2-andi@firstfloor.org
[ Add a "'perf stat' only, for now" comment in the man page, suggested by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo