In case of error, the function ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 67fc209b52 ("cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* pm-cpufreq:
cpufreq: Fix typo in kerneldoc comment
cpufreq: schedutil: Remove update_lock comment from struct sugov_policy definition
cpufreq: schedutil: Remove needless sg_policy parameter from ignore_dl_rate_limit()
cpufreq: ACPI: Set cpuinfo.max_freq directly if max boost is known
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
* pm-opp:
opp: Don't skip freq update for different frequency
Pull ARM cpufreq fix for 5.12 from Viresh Kumar:
"Single patch to fix issue with cpu hotplug and policy recreation for
qcom-cpufreq-hw driver."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
Commit f17b3e4432 ("cpufreq: qcom-hw: Use
devm_platform_ioremap_resource() to simplify code") introduces
a regression on platforms using the driver, by failing to initialise
a policy, when one is created post hotplug.
When all the CPUs of a policy are hoptplugged out, the call to .exit()
and later to devm_iounmap() does not release the memory region that was
requested during devm_platform_ioremap_resource(). Therefore,
a subsequent call to .init() will result in the following error, which
will prevent a new policy to be initialised:
[ 3395.915416] CPU4: shutdown
[ 3395.938185] psci: CPU4 killed (polled 0 ms)
[ 3399.071424] CPU5: shutdown
[ 3399.094316] psci: CPU5 killed (polled 0 ms)
[ 3402.139358] CPU6: shutdown
[ 3402.161705] psci: CPU6 killed (polled 0 ms)
[ 3404.742939] CPU7: shutdown
[ 3404.765592] psci: CPU7 killed (polled 0 ms)
[ 3411.492274] Detected VIPT I-cache on CPU4
[ 3411.492337] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[ 3411.492448] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
[ 3411.503654] qcom-cpufreq-hw 17d43000.cpufreq: can't request region for resource [mem 0x17d45800-0x17d46bff]
With that being said, the original code was tricky and skipping memory
region request intentionally to hide this issue. The true cause is that
those devm_xxx() device managed functions shouldn't be used for cpufreq
init/exit hooks, because &pdev->dev is alive across the hooks and will
not trigger auto resource free-up. Let's drop the use of device managed
functions and manually allocate/free resources, so that the issue can be
fixed properly.
Cc: v5.10+ <stable@vger.kernel.org> # v5.10+
Fixes: f17b3e4432 ("cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
* pm-opp: (37 commits)
PM / devfreq: Add required OPPs support to passive governor
PM / devfreq: Cache OPP table reference in devfreq
OPP: Add function to look up required OPP's for a given OPP
opp: Replace ENOTSUPP with EOPNOTSUPP
opp: Fix "foo * bar" should be "foo *bar"
opp: Don't ignore clk_get() errors other than -ENOENT
opp: Update bandwidth requirements based on scaling up/down
opp: Allow lazy-linking of required-opps
opp: Remove dev_pm_opp_set_bw()
devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
drm: msm: Migrate to dev_pm_opp_set_opp()
cpufreq: qcom: Migrate to dev_pm_opp_set_opp()
opp: Implement dev_pm_opp_set_opp()
opp: Update parameters of _set_opp_custom()
opp: Allow _generic_set_opp_clk_only() to work for non-freq devices
opp: Allow _generic_set_opp_regulator() to work for non-freq devices
opp: Allow _set_opp() to work for non-freq devices
opp: Split _set_opp() out of dev_pm_opp_set_rate()
opp: Keep track of currently programmed OPP
opp: No need to check clk for errors
...
Pull ARM cpufreq changes for v5.12 from Viresh Kumar:
"- Removal of Tango driver as the platform got removed (Arnd Bergmann).
- Use resource managed APIs for tegra20 (Dmitry Osipenko).
- Generic cleanups for brcmstb (Christophe JAILLET).
- Enable boost support for qcom-hw (Shawn Guo)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: remove tango driver
cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()
cpufreq: brcmstb-avs-cpufreq: Free resources in error path
cpufreq: qcom-hw: enable boost support
cpufreq: tegra20: Use resource-managed API
During cpufreq driver's registration, if the ->init() callback for all
the CPUs fail then there is not much point in keeping the driver around
as it will only account for more of unnecessary noise, for example
cpufreq core will try to suspend/resume the driver which never got
registered properly.
The removal of such a driver is avoided if the driver carries the
CPUFREQ_STICKY flag. This was added way back [1] in 2004 and perhaps no
one should ever need it now. A lot of drivers do set this flag, probably
because they just copied it from other drivers.
This was added earlier for some platforms [2] because their cpufreq
drivers were getting registered before the CPUs were registered with
subsys framework. And hence they used to fail.
The same isn't true anymore though. The current code flow in the kernel
is:
start_kernel()
-> kernel_init()
-> kernel_init_freeable()
-> do_basic_setup()
-> driver_init()
-> cpu_dev_init()
-> subsys_system_register() //For CPUs
-> do_initcalls()
-> cpufreq_register_driver()
Clearly, the CPUs will always get registered with subsys framework
before any cpufreq driver can get probed. Remove the flag and update the
relevant drivers.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/include/linux/cpufreq.h?id=7cc9f0d9a1ab04cedc60d64fd8dcf7df224a3b4d # [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/arch/arm/mach-sa1100/cpu-sa1100.c?id=f59d3bbe35f6268d729f51be82af8325d62f20f5 # [2]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should
be used instead. Migrate to the new API.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
At least on sdm850, the 2956800 khz is detected as a boost frequency in
function qcom_cpufreq_hw_read_lut(). Let's enable boost support by
calling cpufreq_enable_boost_support(), so that we can get the boost
frequency by switching it on via 'boost' sysfs entry like below.
$ echo 1 > /sys/devices/system/cpu/cpufreq/boost
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull ARM cpufreq updates for 5.10-rc1 from Viresh Kumar:
"- STI cpufreq driver updates to allow new hardware (Alain Volmat).
- Minor tegra driver fixes around initial frequency mismatch warnings (Jon
Hunter).
- dev_err simplification for s5pv210 driver (Krzysztof Kozlowski).
- Qcom driver updates to allow new hardware and minor cleanup (Manivannan
Sadhasivam and Matthias Kaehlcke).
- Add missing MODULE_DEVICE_TABLE for armada driver (Pali Rohár).
- Improved defer-probe handling in cpufreq-dt driver (Stephan Gerhold).
- Call dev_pm_opp_of_remove_table() unconditionally for imx driver (Viresh
Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom: Don't add frequencies without an OPP
cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC
cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size
cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code
dt-bindings: cpufreq: cpufreq-qcom-hw: Document Qcom EPSS compatible
cpufreq: qcom-hw: Make use of cpufreq driver_data for passing pdev
cpufreq: armada-37xx: Add missing MODULE_DEVICE_TABLE
cpufreq: arm: Kconfig: add CPUFREQ_DT depend for STI CPUFREQ
cpufreq: dt-platdev: Blacklist st,stih418 SoC
cpufreq: sti-cpufreq: add stih418 support
cpufreq: s5pv210: Use dev_err instead of pr_err in probe
cpufreq: s5pv210: Simplify with dev_err_probe()
cpufreq: tegra186: Fix initial frequency
cpufreq: dt: Refactor initialization to handle probe deferral properly
opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()
cpufreq: imx6q: Unconditionally call dev_pm_opp_of_remove_table()
opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
To properly scale its per-entity load-tracking signals, the task scheduler
needs to be given a frequency scale factor, i.e. some image of the current
frequency the CPU is running at. Currently, this scale can be computed
either by using counters (APERF/MPERF on x86, AMU on arm64), or by
piggy-backing on the frequency selection done by cpufreq.
For the latter, drivers have to explicitly set the scale factor
themselves, despite it being purely boiler-plate code: the required
information depends entirely on the kind of frequency switch callback
implemented by the driver, i.e. either of: target_index(), target(),
fast_switch() and setpolicy().
The fitness of those callbacks with regard to driving the Frequency
Invariance Engine (FIE) is studied below:
target_index()
==============
Documentation states that the chosen frequency "must be determined by
freq_table[index].frequency". It isn't clear if it *has* to be that
frequency, or if it can use that frequency value to do some computation
that ultimately leads to a different frequency selection. All drivers
go for the former, while the vexpress-spc-cpufreq has an atypical
implementation which is handled separately.
Therefore, the hook works on the assumption the core can use
freq_table[index].frequency.
target()
=======
This has been flagged as deprecated since:
commit 9c0ebcf78f ("cpufreq: Implement light weight ->target_index() routine")
It also doesn't have that many users:
gx-suspmod.c:439: .target = cpufreq_gx_target,
s3c24xx-cpufreq.c:428: .target = s3c_cpufreq_target,
intel_pstate.c:2528: .target = intel_cpufreq_target,
cppc_cpufreq.c:401: .target = cppc_cpufreq_set_target,
cpufreq-nforce2.c:371: .target = nforce2_target,
sh-cpufreq.c:163: .target = sh_cpufreq_target,
pcc-cpufreq.c:573: .target = pcc_cpufreq_target,
Similarly to the path taken for target_index() calls in the cpufreq core
during a frequency change, all of the drivers above will mark the end of a
frequency change by a call to cpufreq_freq_transition_end().
Therefore, cpufreq_freq_transition_end() can be used as the location for
the arch_set_freq_scale() call to potentially inform the scheduler of the
frequency change.
This change maintains the previous functionality for the drivers that
implement the target_index() callback, while also adding support for the
few drivers that implement the deprecated target() callback.
fast_switch()
=============
This callback *has* to return the frequency that was selected.
setpolicy()
===========
This callback does not have any designated way of informing what was the
end choice. But there are only two drivers using setpolicy(), and none
of them have current FIE support:
drivers/cpufreq/longrun.c:281: .setpolicy = longrun_set_policy,
drivers/cpufreq/intel_pstate.c:2215: .setpolicy = intel_pstate_set_policy,
The intel_pstate is known to use counter-driven frequency invariance.
Conclusion
==========
Given that the significant majority of current FIE enabled drivers use
callbacks that lend themselves to triggering the setting of the FIE scale
factor in a generic way, move the invariance setter calls to cpufreq core.
As a result of setting the frequency scale factor in cpufreq core, after
callbacks that lend themselves to trigger it, remove this functionality
from the driver side.
To be noted that despite marking a successful frequency change, many
cpufreq drivers will consider the new frequency as the requested
frequency, although this is might not be the one granted by the hardware.
Therefore, the call to arch_set_freq_scale() is a "best effort" one, and
it is up to the architecture if the new frequency is used in the new
frequency scale factor setting (determined by the implementation of
arch_set_freq_scale()) or eventually used by the scheduler (determined
by the implementation of arch_scale_freq_capacity()). The architecture
is in a better position to decide if it has better methods to obtain
more accurate information regarding the current frequency and use that
information instead (for example, the use of counters).
Also, the implementation to arch_set_freq_scale() will now have to handle
error conditions (current frequency == 0) in order to prevent the
overhead in cpufreq core when the default arch_set_freq_scale()
implementation is used.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Suggested-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The driver currently adds all frequencies from the hardware LUT to
the cpufreq table, regardless of whether the corresponding OPP
exists. This prevents devices from disabling certain OPPs through
the device tree and can result in CPU frequencies for which the
interconnect bandwidth can't be adjusted. Only add frequencies
with an OPP entry.
Fixes: 55538fbc79 ("cpufreq: qcom: Read voltage LUT and populate OPP")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
SM8250 SoC uses EPSS block for carrying out the cpufreq duties. Hence, add
support for it in the driver with relevant dev data.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
For preparing the driver to handle further SoC revisions, let's use the
of_device_get_match_data() API for getting the device specific offsets
and row size instead of defining them globally.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
devm_platform_ioremap_resource() is the combination of
platform_get_resource() and devm_ioremap_resource(). Hence, use it to
simplify the code a bit.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Get rid of global_pdev pointer and make use of cpufreq driver_data for
passing the reference of pdev. This aligns with what other cpufreq drivers
are doing.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull ARM cpufreq driver changes for v5.9-rc1 from Viresh Kumar:
"Here are the details:
- Adaptive voltage scaling (AVS) support and minor cleanups for
brcmstb driver (Florian Fainelli and Markus Mayer).
- A new tegra driver and cleanup for the existing one (Sumit Gupta and
Jon Hunter).
- Bandwidth level support for Qcom driver along with OPP changes (Sibi
Sankar).
- Cleanups to sti, cpufreq-dt, ap806, CPPC drivers (Viresh Kumar, Lee
Jones, Ivan Kokshaysky, Sven Auhagen, and Xin Hao).
- Make schedutil default governor for ARM (Valentin Schneider).
- Fix dependency issues for imx (Walter Lozano).
- Cleanup around cached_resolved_idx in cpufreq core (Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: make schedutil the default for arm and arm64
cpufreq: cached_resolved_idx can not be negative
cpufreq: Add Tegra194 cpufreq driver
dt-bindings: arm: Add NVIDIA Tegra194 CPU Complex binding
cpufreq: imx: Select NVMEM_IMX_OCOTP
cpufreq: sti-cpufreq: Fix some formatting and misspelling issues
cpufreq: tegra186: Simplify probe return path
cpufreq: CPPC: Reuse caps variable in few routines
cpufreq: ap806: fix cpufreq driver needs ap cpu clk
cpufreq: cppc: Reorder code and remove apply_hisi_workaround variable
cpufreq: dt: fix oops on armada37xx
cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS
cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware
cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command()
cpufreq: qcom: Disable fast switch when scaling DDR/L3
cpufreq: qcom: Update the bandwidth levels on frequency change
OPP: Add and export helper to set bandwidth
cpufreq: blacklist SC7180 in cpufreq-dt-platdev
cpufreq: blacklist SDM845 in cpufreq-dt-platdev
It is not possible for cached_resolved_idx to be invalid here as the
cpufreq core always sets index to a positive value.
Change its type to unsigned int and fix qcom usage a bit.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Disable fast switch when the opp-tables required for scaling DDR/L3
are populated.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support to parse optional OPP table attached to the cpu node when
the OPP bandwidth values are populated. This allows for scaling of
DDR/L3 bandwidth levels with frequency change.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Energy Model framework supports not only CPU devices. Drop the CPU
specific interface with cpumask and add struct device. Add also a return
value, user might use it. This new interface provides easy way to create
a simple Energy Model, which then might be used by e.g. thermal subsystem.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow qcom-hw driver to initialize right after the cpufreq and thermal
subsystems are initialised in core_initcall so we get earlier access to
thermal mitigation.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Taniya Das <tdas@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/eacce8d08388b0bdfc908d2701fe7c2b78d90441.1571656015.git.amit.kucheria@linaro.org
Add calls to arch_set_freq_scale() in qcom-cpufreq-hw driver to enable
frequency invariance.
Signed-off-by: Douglas RAILLARD <douglas.raillard@arm.com>
Reviewed-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The core count read back from the each domain's look up table serves
as an indicator for the onset of the turbo frequency and not accurate
representation of number of cores in a paticular domain. Update turbo
detection logic accordingly to add support for SM8150 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull ARM cpufreq driver updates for v5.1 from Viresh Kumar:
"This pull request contains following changes:
- New Armada 8k cpufreq driver (Gregory CLEMENT).
- qcom driver cleanups (Amit Kucheria, Taniya Das, Yangtao Li).
- s5pv210 driver cleanup (Paweł Chmiel).
- tegra driver cleanup (Yangtao Li).
- Minor update to MAINTAINERS file (Baruch Siach)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: Register an Energy Model
cpufreq: qcom: Read voltage LUT and populate OPP
cpufreq: qcom-hw: Move to device_initcall
cpufreq: tegra124: add missing of_node_put()
cpufreq: qcom-kryo: make some variables static
MAINTAINERS: Update the active pm tree for ARM
cpufreq: ap806: add cpufreq driver for Armada 8K
MAINTAINERS: add new entries for Armada 8K cpufreq driver
cpufreq: s5pv210: Defer probe if getting regulators fail
MAINTAINERS: use common indentation
PM / OPP: Introduce a power estimation helper
PM / OPP: Remove unused parameter of _generic_set_opp_clk_only()
Try and register an Energy Model from qcom-cpufreq-hw to allow
interested sub-systems like the task scheduler to use the provided
information.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
[ Viresh: Rebased over cpufreq related changes ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support to read the voltage look up table and populate OPP for all
corresponding CPUS for consumers like the energy model could use the
frequency and voltage from the OPP tables. Also update the logic to not add
duplicate OPPs.
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
subsys_initcall causes problems registering the driver as a thermal
cooling device.
If "faster boot" is the main reason for doing subsys_initcall, this
should be handled in the bootloader or another boot constraint
framework.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add the CPUFREQ_IS_COOLING_DEV flag to allow the cpufreq core to
auto-register the driver as a cooling device.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The CPUfreq HW present in some QCOM chipsets offloads the steps necessary
for changing the frequency of CPUs. The driver implements the cpufreq
driver interface for this hardware engine.
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Wei Yongjun