This reverts commit 6fb8f43ced.
The IO threads do allow signals now, including SIGSTOP, and we can allow
ptrace attach. Attaching won't reveal anything interesting for the IO
threads, but it will allow eg gdb to attach to a task with io_urings
and IO threads without complaining. And once attached, it will allow
the usual introspection into regular threads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 5be28c8f85.
IO threads now take signals just fine, so there's no reason to limit them
specifically. Revert the change that prevented that from happening.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is racy - move the blocking into when the task is created and
we're marking it as PF_IO_WORKER anyway. The IO threads are now
prepared to handle signals like SIGSTOP as well, so clear that from
the mask to allow proper stopping of IO threads.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We go through various hoops to disallow signals for the IO threads, but
there's really no reason why we cannot just allow them. The IO threads
never return to userspace like a normal thread, and hence don't go through
normal signal processing. Instead, just check for a pending signal as part
of the work loop, and call get_signal() to handle it for us if anything
is pending.
With that, we can support receiving signals, including special ones like
SIGSTOP.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit a33df75c63 ("block: use an xarray for disk->part_tbl") drops the
check on max supported number of partitionsr, and allows partition with
bigger partition numbers to be added. However, ->bd_partno is defined as
u8, so partition index of xarray table may not match with ->bd_partno.
Then delete_partition() may delete one unmatched partition, and caused
use-after-free.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com
Fixes: a33df75c63 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1. The debug message which is printed for
these unknown handles may also be misleading, so fix that too.
The SMB2 lease break path is not affected by this patch.
Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".
CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
00000000: 424d53fe 00000040 00000000 00000012 .SMB@...........
00000010: 00000001 00000000 ffffffff ffffffff ................
00000020: 00000000 00000000 00000000 00000000 ................
00000030: 00000000 00000000 00000000 00000000 ................
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1933527
Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
My recent fixes to cifsacl to maintain inherited ACEs had
regressed modefromsid when an older ACL already exists.
Found testing xfstest 495 with modefromsid mount option
Fixes: f506550889 ("cifs: Retain old ACEs when converting between mode bits and ACL")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Right now we're never calling get_signal() from PF_IO_WORKER threads, but
in preparation for doing so, don't handle a fatal signal for them. The
workers have state they need to cleanup when exiting, so just return
instead of calling do_exit() on their behalf. The threads themselves will
detect a fatal signal and do proper shutdown.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix DM core's zoned model and zone sectors checks.
- Fix spurious "detected capacity change" pr_info() when creating new
DM device.
- Fix DM ioctl out of bounds array access in handling of
DM_LIST_DEVICES_CMD when no devices exist.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmBeMf0THHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlr1B/9Jh6YUtTe1dN5rCEPheikFwcsDgoYk
zfgeS57GHv/rzQ9hdVPBqHvc4ZjEZ7hLkV8Pa0eyyDnslwHfH/B8/38LVSdOe1QK
52787CXTAcBHjnEzGbs2TP2oGhHQ4rN9h6lMKzs3jcglWunutHKnesAXGC3yItsr
WzYzskiL/gpS+Px936JVVjJirzKFX1jnbXZ4BMq3/7vqu5DJ8M+2mrf4H1wxfIMP
NeV40j4vAkqJKbQyVFYfzRdXxP+FswR9kLHQv96RW0y98JDg7h5TtYGrAaRZdpRw
HQ+96/dZWyH2MpJ5nptSIVbU71u9EtLuRCa5HhB903p14NQsrR0qGBfc
=YT+2
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's optional argument processing.
- Fix DM core's zoned model and zone sectors checks.
- Fix spurious "detected capacity change" pr_info() when creating new
DM device.
- Fix DM ioctl out of bounds array access in handling of
DM_LIST_DEVICES_CMD when no devices exist.
* tag 'for-5.12/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm ioctl: fix out of bounds array access when no devices
dm: don't report "detected capacity change" on device creation
dm table: Fix zoned model check and zone sectors check
dm verity: fix DM_VERITY_OPTS_MAX value
If there are not any dm devices, we need to zero the "dev" argument in
the first structure dm_name_list. However, this can cause out of
bounds write, because the "needed" variable is zero and len may be
less than eight.
Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is
too small to hold the "nl->dev" value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Make ACPICA use the same object cache consistently when allocating
and freeing objects (Vegard Nossum).
- Add a callback pointer removed inadvertently during the 5.11 cycle
to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
Chiu).
- Make the ACPI device enumeration core use IDA for creating names of
ACPI device objects with the same primary device ID to avoid using
duplicate device object names in some cases (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=Wi4B
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a memory management regression in ACPICA, repair an ACPI
blacklist entry damaged inadvertently during the 5.11 cycle and fix
the bookkeeping of devices with the same primary device ID in the ACPI
core.
Specifics:
- Make ACPICA use the same object cache consistently when allocating
and freeing objects (Vegard Nossum)
- Add a callback pointer removed inadvertently during the 5.11 cycle
to the ACPI backlight blacklist entry for Sony VPCEH3U1E (Chris
Chiu)
- Make the ACPI device enumeration core use IDA for creating names of
ACPI device objects with the same primary device ID to avoid using
duplicate device object names in some cases (Andy Shevchenko)"
* tag 'acpi-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Always create namespace nodes using acpi_ns_create_node()
ACPI: scan: Use unique number for instance_no
ACPI: video: Add missing callback back for Sony VPCEH3U1E
- Modify the runtime PM device suspend to avoid suspending
supplier devices before the consumer device's status changes
to RPM_SUSPENDED (Rafael Wysocki).
- Change the Energy Model code to prevent it from attempting to
create its main debugfs directory too early (Lukasz Luba).
-----BEGIN PGP SIGNATURE-----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=9csw
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an issue related to device links in the runtime PM framework
and debugfs usage in the Energy Model code.
Specifics:
- Modify the runtime PM device suspend to avoid suspending supplier
devices before the consumer device's status changes to
RPM_SUSPENDED (Rafael Wysocki)
- Change the Energy Model code to prevent it from attempting to
create its main debugfs directory too early (Lukasz Luba)"
* tag 'pm-5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: postpone creating the debugfs dir till fs_initcall
PM: runtime: Defer suspending suppliers
Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to fix a
kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25 with
fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board to
fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27 SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=LBps
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Too many fixes have accumulated in the soc tree, so this is a fairly
large set. As usual, most of the fixes are for devicetree files, but
there are also notable code changes for imx and omap regressions as
well as some maintainer file updates.
imx:
- Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
independent PHY reset.
- Add missing `dma-coherent` property for LayerScape device trees to
fix a kernel BUG report.
- Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25
with fw_devlink=on.
- Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board
to fix the broken I2C GPIO recovery support.
- Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
device tree to fix UBI filesystem mount failure.
at91:
- wrong phy address that blocks Ethernet use on boards with sama5d27
SoM1
- restrictive pin possibilities for sam9x60
omap:
- Fix ocp interconnect bus access error reporting for omap_l3_noc by
setting IRQF_NO_THREAD
- Fix changed mmc slot order regression by adding mmc aliases for
am335x
- Fix dra7 reboot regression caused by invalid pcie reset map
- Fix smartreflex init regression caused by dropped legacy data
- Fix ti-sysc driver warning on unbind if reset is not deasserted
- Fix flakey reset deassert for dra7 iva
stm32:
- MAINTAINER file updates
broadcom:
- brcmstb SoC ID build fix
- MAINTAINER file updates"
* tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer
MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers.
MAINTAINERS: Update some st.com email addresses to foss.st.com
ARM: dts: imx6ull: fix ubi filesystem mount failed
ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry
arm64: dts: ls1012a: mark crypto engine dma coherent
arm64: dts: ls1043a: mark crypto engine dma coherent
arm64: dts: ls1046a: mark crypto engine dma coherent
ARM: imx: avic: Convert to using IRQCHIP_DECLARE
ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet
ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C
ARM: dts: at91-sama5d27_som1: fix phy address to 7
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYF37OgAKCRCAXGG7T9hj
vp8hAP4h7mvjfkntbFXagrJK9pi2xVC9d/YO5nfa8/K3LcGVnQD/fKcU9ggPN9vI
GLnhyprGLcCA4aTL6Ogb37o9fDd4Yws=
=joIg
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains a small series with a more elegant fix of a problem
which was originally fixed in rc2"
* tag 'for-linus-5.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"
xen/x86: make XEN_BALLOON_MEMORY_HOTPLUG_LIMIT depend on MEMORY_HOTPLUG
msm:
- pll fixes
- shutdown hook fix
- runtime resume fix
- clear_oob fix
- kms locking fix
- display aux retry fix
rcar-du:
- warn_on in encoder init fix
etnaviv:
- Use FOLL_FORCE and FOLL_LONGTERM
i915:
- DisplayPort LTTPR fixes around link training and limiting it
according to supported spec version.
- Fix enabled_planes bitmask to really represent only logically
enabled planes.
- Fix DSS CTL registers for ICL DSI transcoders
- Fix the GT fence revocation runtime PM logic.
nouveau:
- cursor size regression fix
amdgpu:
- S0ix fixes
- Add PCI ID
- Polaris PCIe DPM fix
- Display fix for high refresh rate monitors
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJgXVVAAAoJEAx081l5xIa+KGUP/2PaWOkYrEnZHOKAzTDethpQ
e5SzfbK7ywDsM4vPHrz+RnJqa269xkddXaEYzajilrN6/Mmj56pyRrMWRD040E3a
fL5DSmEJtotFqlSRZxeZ+NZQpTLY0ujIBcAiOs1c7JOKbIeUXByZTIL0L0joOAcW
ASVWOjet6ptWj/t2VNTh/7Lkh6vOE9NpyeMVIgx1D4ep5LTO164WMdfqZshEWVXq
IlDgO9cQ5MRl/S3oxs0PJ42lQZMGPlKHTmvch5GgybKit16Ah4XE4Ur+ND7TB7nu
yeN9+geD2spxnZjRpjPZkzFO/kdAeEoSy4fR6RmmdlyfKyPaIBbL2VL6Ox2L+x1W
H4D+Gl5D1yX38Tp3XO/XoxVMQTdi3EdBP+9piGvqIR+cGJApjP+FjwiWrl1/IPCb
eSRjzgaTQlSCTOevmjEggRY7g2krrMvb8eVfg1T2QxdM6EEloCbBui5RJEUoMErj
+FyLXBWXJSAlbvfjeIKi1id3ZydL17Y3Hsm5bbmMCjyiWnQvGqS6Ia0BZC+Wan30
+hlKkJnVJakiycAvoU/i4bsAPLmzrfIrFRPe6HepLczX0t7Srz7X37SdoSko6a07
6c8Y1nCMxj6gMhblB6MTK5/5PIu4xPJ0wTt/kppTS3UESu3TlnJsG8s/I8BcttDc
fewkz0IkO9JRSfp9Cxs3
=S23m
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"As expected last week things were overly quiet so this week things
seem to have caught up. It still isn't too major.
msm and amdgpu lead the size here, the msm fixes are pretty varied
across the driver, the amdgpu one is mostly the S0ix fixes with some
other minor ones. Otherwise there are a few i915 fixes and one each
for nouveau, etnaviv and rcar-du.
msm:
- pll fixes
- shutdown hook fix
- runtime resume fix
- clear_oob fix
- kms locking fix
- display aux retry fix
rcar-du:
- warn_on in encoder init fix
etnaviv:
- Use FOLL_FORCE and FOLL_LONGTERM
i915:
- DisplayPort LTTPR fixes around link training and limiting it
according to supported spec version.
- Fix enabled_planes bitmask to really represent only logically
enabled planes.
- Fix DSS CTL registers for ICL DSI transcoders
- Fix the GT fence revocation runtime PM logic.
nouveau:
- cursor size regression fix
amdgpu:
- S0ix fixes
- Add PCI ID
- Polaris PCIe DPM fix
- Display fix for high refresh rate monitors"
* tag 'drm-fixes-2021-03-26' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/nouveau/kms/nve4-nv108: Limit cursors to 128x128
drm/i915: Fix the GT fence revocation runtime PM logic
drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.x
drm/amdgpu: Add additional Sienna Cichlid PCI ID
drm/amd/pm: workaround for audio noise issue
drm/i915/dsc: fix DSS CTL register usage for ICL DSI transcoders
drm/i915: Fix enabled_planes bitmask
drm/i915: Disable LTTPR support when the LTTPR rev < 1.4
drm/i915: Disable LTTPR support when the DPCD rev < 1.4
drm/i915/ilk-glk: Fix link training on links with LTTPRs
drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume
drm/amdgpu: skip kfd suspend/resume for S0ix
drm/amdgpu: drop S0ix checks around CG/PG in suspend
drm/amdgpu: skip CG/PG for gfx during S0ix
drm/amdgpu: update comments about s0ix suspend/resume
drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspend
drm/amdgpu: re-enable suspend phase 2 for S0ix
drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3)
drm/amdgpu: clean up non-DC suspend/resume handling
drm/amdgpu: don't evict vram on APUs for suspend to ram (v4)
...
Dan's address bounces, and has been bouncing for some time as he moved
to other projects.
I believe TI should be more careful with this, and should assign
alternate contacts for their drivers.
Anyway what we can do now is to remove the obsolete address.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For AES256 encryption (GCM and CCM), we need to adjust the size of a few
fields to 32 bytes instead of 16 to accommodate the larger keys.
Also, the L value supplied to the key generator needs to be changed from
to 256 when these algorithms are used.
Keeping the ioctl struct for dumping keys of the same size for now.
Will send out a different patch for that one.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Steve French <stfrench@microsoft.com>
When executing the daemon test on Arm64 and x86 with Debian (Buster)
distro, both skip the test case with the log:
# ./perf test -v 76
76: daemon operations :
--- start ---
test child forked, pid 11687
test daemon list
trap: SIGINT: bad trap
./tests/shell/daemon.sh: 173: local: cpu-clock: bad variable name
test child finished with -2
---- end ----
daemon operations: Skip
So the error happens for the variable expansion when use local variable
in the shell script. Since Debian Buster uses dash but not bash as
non-interactive shell, when execute the daemon testing, it hits a known
issue for dash which was reported [1].
To resolve this issue, one option is to add double quotes for all local
variables assignment, so need to change the code from:
local line=`perf daemon --config ${config} -x: | head -2 | tail -1`
... to:
local line="`perf daemon --config ${config} -x: | head -2 | tail -1`"
But the testing script has bunch of local variables, this leads to big
changes for whole script.
On the other hand, the testing script asks to use the "local" feature
which is bash-specific, so this patch explicitly uses "#!/bin/bash" to
ensure running the script with bash.
After:
# ./perf test -v 76
76: daemon operations :
--- start ---
test child forked, pid 11329
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [11596]'
signal 12 sent to session 'test [11596]'
test daemon ping
test daemon lock
test child finished with 0
---- end ----
daemon operations: Ok
[1] https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097
Fixes: 2291bb915b ("perf tests: Add daemon 'list' command test")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210320104554.529213-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qVQp
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.12-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fix from Mimi Zohar:
"Just one patch to address a NULL ptr dereferencing when there is a
mismatch between the user enabled LSMs and IMA/EVM"
* tag 'integrity-v5.12-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: double check iint_cache was initialized
-----BEGIN PGP SIGNATURE-----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=SuJv
-----END PGP SIGNATURE-----
Merge tag 'for-5.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes for issues that have some user visibility and are simple enough
for this time of development cycle:
- a few fixes for rescue= mount option, adding more checks for
missing trees
- fix sleeping in atomic context on qgroup deletion
- fix subvolume deletion on mount
- fix build with M= syntax
- fix checksum mismatch error message for direct io"
* tag 'for-5.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix check_data_csum() error message for direct I/O
btrfs: fix sleep while in non-sleep context during qgroup removal
btrfs: fix subvolume/snapshot deletion not triggered on mount
btrfs: fix build when using M=fs/btrfs
btrfs: do not initialize dev replace for bad dev root
btrfs: initialize device::fs_info always
btrfs: do not initialize dev stats if we have no dev_root
btrfs: zoned: remove outdated WARN_ON in direct IO
- Use FOLL_FORCE and FOLL_LONGTERM in etnaviv
-----BEGIN PGP SIGNATURE-----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=MdU9
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2021-03-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.12:
- Use FOLL_FORCE and FOLL_LONGTERM in etnaviv
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72d4c9ce-6709-4e0f-a715-79fdcebb48e7@linux.intel.com
Arguably we want CQEs of linked requests be in a strict order of
submission as it always was. Now if init of a request fails its CQE may
be posted before all prior linked requests including the head of the
link. Fix it by failing it last.
Fixes: de59bc104c ("io_uring: fail links more in io_submit_sqe()")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b7a96b05832e7ab23ad55f84092a2548c4a888b0.1616699075.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge misc fixes from Andrew Morton:
"14 patches.
Subsystems affected by this patch series: mm (hugetlb, kasan, gup,
selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64,
gcov, and mailmap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: update Andrey Konovalov's email address
mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm: memblock: fix section mismatch warning again
kfence: make compatible with kmemleak
gcov: fix clang-11+ support
ia64: fix format strings for err_inject
ia64: mca: allocate early mca with GFP_ATOMIC
squashfs: fix xattr id and id lookup sanity checks
squashfs: fix inode lookup sanity checks
z3fold: prevent reclaim/free race for headless pages
selftests/vm: fix out-of-tree build
mm/mmu_notifiers: ensure range_end() is paired with range_start()
kasan: fix per-page tags for non-page_alloc pages
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of sync
- Longstanding cxgb4 adaptor crash when destroying cm ids
-----BEGIN PGP SIGNATURE-----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=vjhp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not much going on, just some small bug fixes:
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of
sync
- Long-standing cxgb4 adaptor crash when destroying cm ids"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
RDMA/hns: Fix bug during CMDQ initialization
RDMA/mlx5: Fix typo in destroy_mkey inbox
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmBccr0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG6UCACDbz3BO/y40wRhWwMhvDhyFDqtlTlVEQlb
hxnJzksXOlbqHB1J7yamzXxS1UlCBlhvjrFNTe1s5LJIfB0niMskYLe2p0dJ/voi
WyysvaiK7/1bZV/RRdF7r+hFtMPHBEAKfgs+ZxFN9mnMcserV8PWqiD5ookCqavE
xatE/fEgVujiISl/BOkP1pnmWnPM4f9BIMS5DgaZJsNDYtxeu9a3RGnfu9vNHaP2
gxq5+E3BjZfh1z0++HP6nTuDbdDaxEz12gyoZ+4wejXVhwj1g7NySJNa8RmJG9pU
gX+jE6HOgeCFIEe9Gx+I2QtAaFia96HVnAAHagGBHB1vfV7GTRxN
=tzbO
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Minor fixes all over, ranging from typos to tests to errata
workarounds:
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: disable CNP on Carmel
arm64/process.c: fix Wmissing-prototypes build warnings
kselftest/arm64: sve: Do not use non-canonical FFR register value
arm64: mm: correct the inside linear map range during hotplug check
arm64: kdump: update ppos when reading elfcorehdr
arm64: cpuinfo: Fix a typo
Documentation: arm64/acpi : clarify arm64 support of IBFT
arm64: stacktrace: don't trace arch_stack_walk()
arm64: csum: cast to the proper type
Redirect my older email addresses in the git logs.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel test robot found that __kmap_local_sched_out() was not
correctly skipping the guard pages when DEBUG_KMAP_LOCAL_FORCE_MAP was
set.[1] This was due to DEBUG_HIGHMEM check being used.
Change the configuration check to be correct.
[1] https://lore.kernel.org/lkml/20210304083825.GB17830@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/20210318230657.1497881-1-ira.weiny@intel.com
Fixes: 0e91a0c698 ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Cc: David Sterba <dsterba@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 34dc2efb39 ("memblock: fix section mismatch warning") marked
memblock_bottom_up() and memblock_set_bottom_up() as __init, but they
could be referenced from non-init functions like
memblock_find_in_range_node() on architectures that enable
CONFIG_ARCH_KEEP_MEMBLOCK.
For such builds kernel test robot reports:
WARNING: modpost: vmlinux.o(.text+0x74fea4): Section mismatch in reference from the function memblock_find_in_range_node() to the function .init.text:memblock_bottom_up()
The function memblock_find_in_range_node() references the function __init memblock_bottom_up().
This is often because memblock_find_in_range_node lacks a __init annotation or the annotation of memblock_bottom_up is wrong.
Replace __init annotations with __init_memblock annotations so that the
appropriate section will be selected depending on
CONFIG_ARCH_KEEP_MEMBLOCK.
Link: https://lore.kernel.org/lkml/202103160133.UzhgY0wt-lkp@intel.com
Link: https://lkml.kernel.org/r/20210316171347.14084-1-rppt@kernel.org
Fixes: 34dc2efb39 ("memblock: fix section mismatch warning")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because memblock allocations are registered with kmemleak, the KFENCE
pool was seen by kmemleak as one large object. Later allocations
through kfence_alloc() that were registered with kmemleak via
slab_post_alloc_hook() would then overlap and trigger a warning.
Therefore, once the pool is initialized, we can remove (free) it from
kmemleak again, since it should be treated as allocator-internal and be
seen as "free memory".
The second problem is that kmemleak is passed the rounded size, and not
the originally requested size, which is also the size of KFENCE objects.
To avoid kmemleak scanning past the end of an object and trigger a
KFENCE out-of-bounds error, fix the size if it is a KFENCE object.
For simplicity, to avoid a call to kfence_ksize() in
slab_post_alloc_hook() (and avoid new IS_ENABLED(CONFIG_DEBUG_KMEMLEAK)
guard), just call kfence_ksize() in mm/kmemleak.c:create_object().
Link: https://lkml.kernel.org/r/20210317084740.3099921-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Luis Henriques <lhenriques@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LLVM changed the expected function signatures for llvm_gcda_start_file()
and llvm_gcda_emit_function() in the clang-11 release. Users of
clang-11 or newer may have noticed their kernels failing to boot due to
a panic when enabling CONFIG_GCOV_KERNEL=y +CONFIG_GCOV_PROFILE_ALL=y.
Fix up the function signatures so calling these functions doesn't panic
the kernel.
Link: https://reviews.llvm.org/rGcdd683b516d147925212724b09ec6fb792a40041
Link: https://reviews.llvm.org/rG13a633b438b6500ecad9e4f936ebadf3411d0f44
Link: https://lkml.kernel.org/r/20210312224132.3413602-2-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Prasad Sodagudi <psodagud@quicinc.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix warning with %lx / u64 mismatch:
arch/ia64/kernel/err_inject.c: In function 'show_resources':
arch/ia64/kernel/err_inject.c:62:22: warning:
format '%lx' expects argument of type 'long unsigned int',
but argument 3 has type 'u64' {aka 'long long unsigned int'}
62 | return sprintf(buf, "%lx", name[cpu]); \
| ^~~~~~~
Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The sleep warning happens at early boot right at secondary CPU
activation bootup:
smp: Bringing up secondary CPUs ...
BUG: sleeping function called from invalid context at mm/page_alloc.c:4942
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99
..
Call Trace:
show_stack+0x90/0xc0
dump_stack+0x150/0x1c0
___might_sleep+0x1c0/0x2a0
__might_sleep+0xa0/0x160
__alloc_pages_nodemask+0x1a0/0x600
alloc_page_interleave+0x30/0x1c0
alloc_pages_current+0x2c0/0x340
__get_free_pages+0x30/0xa0
ia64_mca_cpu_init+0x2d0/0x3a0
cpu_init+0x8b0/0x1440
start_secondary+0x60/0x700
start_ap+0x750/0x780
Fixed BSP b0 value from CPU 1
As I understand interrupts are not enabled yet and system has a lot of
memory. There is little chance to sleep and switch to GFP_ATOMIC should
be a no-op.
Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The checks for maximum metadata block size is missing
SQUASHFS_BLOCK_OFFSET (the two byte length count).
Link: https://lkml.kernel.org/r/2069685113.2081245.1614583677427@webmail.123-reg.co.uk
Fixes: f37aa4c736 ("squashfs: add more sanity checks in id lookup")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Sean Nyekjaer <sean@geanix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When mouting a squashfs image created without inode compression it fails
with: "unable to read inode lookup table"
It turns out that the BLOCK_OFFSET is missing when checking the
SQUASHFS_METADATA_SIZE agaist the actual size.
Link: https://lkml.kernel.org/r/20210226092903.1473545-1-sean@geanix.com
Fixes: eabac19e40 ("squashfs: add more sanity checks in inode lookup")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building out-of-tree, attempting to make target from $(OUTPUT) directory:
make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'.
Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If one or more notifiers fails .invalidate_range_start(), invoke
.invalidate_range_end() for "all" notifiers. If there are multiple
notifiers, those that did not fail are expecting _start() and _end() to
be paired, e.g. KVM's mmu_notifier_count would become imbalanced.
Disallow notifiers that can fail _start() from implementing _end() so
that it's unnecessary to either track which notifiers rejected _start(),
or had already succeeded prior to a failed _start().
Note, the existing behavior of calling _start() on all notifiers even
after a previous notifier failed _start() was an unintented "feature".
Make it canon now that the behavior is depended on for correctness.
As of today, the bug is likely benign:
1. The only caller of the non-blocking notifier is OOM kill.
2. The only notifiers that can fail _start() are the i915 and Nouveau
drivers.
3. The only notifiers that utilize _end() are the SGI UV GRU driver
and KVM.
4. The GRU driver will never coincide with the i195/Nouveau drivers.
5. An imbalanced kvm->mmu_notifier_count only causes soft lockup in the
_guest_, and the guest is already doomed due to being an OOM victim.
Fix the bug now to play nice with future usage, e.g. KVM has a
potential use case for blocking memslot updates in KVM while an
invalidation is in-progress, and failure to unblock would result in said
updates being blocked indefinitely and hanging.
Found by inspection. Verified by adding a second notifier in KVM that
periodically returns -EAGAIN on non-blockable ranges, triggering OOM,
and observing that KVM exits with an elevated notifier count.
Link: https://lkml.kernel.org/r/20210311180057.1582638-1-seanjc@google.com
Fixes: 93065ac753 ("mm, oom: distinguish blockable mode for mmu notifiers")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To allow performing tag checks on page_alloc addresses obtained via
page_address(), tag-based KASAN modes store tags for page_alloc
allocations in page->flags.
Currently, the default tag value stored in page->flags is 0x00.
Therefore, page_address() returns a 0x00ffff... address for pages that
were not allocated via page_alloc.
This might cause problems. A particular case we encountered is a
conflict with KFENCE. If a KFENCE-allocated slab object is being freed
via kfree(page_address(page) + offset), the address passed to kfree()
will get tagged with 0x00 (as slab pages keep the default per-page
tags). This leads to is_kfence_address() check failing, and a KFENCE
object ending up in normal slab freelist, which causes memory
corruptions.
This patch changes the way KASAN stores tag in page-flags: they are now
stored xor'ed with 0xff. This way, KASAN doesn't need to initialize
per-page flags for every created page, which might be slow.
With this change, page_address() returns natively-tagged (with 0xff)
pointers for pages that didn't have tags set explicitly.
This patch fixes the encountered conflict with KFENCE and prevents more
similar issues that can occur in the future.
Link: https://lkml.kernel.org/r/1a41abb11c51b264511d9e71c303bb16d5cb367b.1615475452.git.andreyknvl@google.com
Fixes: 2813b9c029 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe